From: Howard Wang <howard_wang@realsil.com.cn>
To: <dev@dpdk.org>
Cc: <pro_nic_dpdk@realtek.com>, Howard Wang <howard_wang@realsil.com.cn>
Subject: [PATCH v7 14/17] net/r8169: implement promisc and allmulti modes
Date: Tue, 12 Nov 2024 17:58:01 +0800 [thread overview]
Message-ID: <20241112095804.42091-15-howard_wang@realsil.com.cn> (raw)
In-Reply-To: <20241112095804.42091-1-howard_wang@realsil.com.cn>
Add support for promiscuous/allmulticast modes configuration.
Signed-off-by: Howard Wang <howard_wang@realsil.com.cn>
---
doc/guides/nics/features/r8169.ini | 4 ++
drivers/net/r8169/r8169_ethdev.c | 67 ++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+)
diff --git a/doc/guides/nics/features/r8169.ini b/doc/guides/nics/features/r8169.ini
index e4bbcde2a0..d2ad94dcc6 100644
--- a/doc/guides/nics/features/r8169.ini
+++ b/doc/guides/nics/features/r8169.ini
@@ -10,6 +10,10 @@ Link status = Y
Link status event = Y
Scattered Rx = Y
TSO = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
Flow control = Y
L3 checksum offload = Y
L4 checksum offload = Y
diff --git a/drivers/net/r8169/r8169_ethdev.c b/drivers/net/r8169/r8169_ethdev.c
index f0792681a3..c90c3c9d03 100644
--- a/drivers/net/r8169/r8169_ethdev.c
+++ b/drivers/net/r8169/r8169_ethdev.c
@@ -38,6 +38,10 @@ static int rtl_dev_infos_get(struct rte_eth_dev *dev,
static int rtl_dev_stats_get(struct rte_eth_dev *dev,
struct rte_eth_stats *rte_stats);
static int rtl_dev_stats_reset(struct rte_eth_dev *dev);
+static int rtl_promiscuous_enable(struct rte_eth_dev *dev);
+static int rtl_promiscuous_disable(struct rte_eth_dev *dev);
+static int rtl_allmulticast_enable(struct rte_eth_dev *dev);
+static int rtl_allmulticast_disable(struct rte_eth_dev *dev);
/*
* The set of PCI devices this driver supports
@@ -74,6 +78,11 @@ static const struct eth_dev_ops rtl_eth_dev_ops = {
.dev_set_link_down = rtl_dev_set_link_down,
.dev_infos_get = rtl_dev_infos_get,
+ .promiscuous_enable = rtl_promiscuous_enable,
+ .promiscuous_disable = rtl_promiscuous_disable,
+ .allmulticast_enable = rtl_allmulticast_enable,
+ .allmulticast_disable = rtl_allmulticast_disable,
+
.link_update = rtl_dev_link_update,
.stats_get = rtl_dev_stats_get,
@@ -372,6 +381,64 @@ rtl_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
return 0;
}
+static int
+rtl_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct rtl_adapter *adapter = RTL_DEV_PRIVATE(dev);
+ struct rtl_hw *hw = &adapter->hw;
+
+ int rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys;
+
+ RTL_W32(hw, RxConfig, rx_mode | (RTL_R32(hw, RxConfig)));
+ rtl_allmulticast_enable(dev);
+
+ return 0;
+}
+
+static int
+rtl_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct rtl_adapter *adapter = RTL_DEV_PRIVATE(dev);
+ struct rtl_hw *hw = &adapter->hw;
+ int rx_mode = ~AcceptAllPhys;
+
+ RTL_W32(hw, RxConfig, rx_mode & (RTL_R32(hw, RxConfig)));
+
+ if (dev->data->all_multicast == 1)
+ rtl_allmulticast_enable(dev);
+ else
+ rtl_allmulticast_disable(dev);
+
+ return 0;
+}
+
+static int
+rtl_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct rtl_adapter *adapter = RTL_DEV_PRIVATE(dev);
+ struct rtl_hw *hw = &adapter->hw;
+
+ RTL_W32(hw, MAR0 + 0, 0xffffffff);
+ RTL_W32(hw, MAR0 + 4, 0xffffffff);
+
+ return 0;
+}
+
+static int
+rtl_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct rtl_adapter *adapter = RTL_DEV_PRIVATE(dev);
+ struct rtl_hw *hw = &adapter->hw;
+
+ if (dev->data->promiscuous == 1)
+ return 0; /* Must remain in all_multicast mode */
+
+ RTL_W32(hw, MAR0 + 0, 0);
+ RTL_W32(hw, MAR0 + 4, 0);
+
+ return 0;
+}
+
static int
rtl_dev_stats_reset(struct rte_eth_dev *dev)
{
--
2.34.1
next prev parent reply other threads:[~2024-11-12 10:01 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-12 9:57 [PATCH v7 00/17] modify code as suggested by the maintainer Howard Wang
2024-11-12 9:57 ` [PATCH v7 01/17] net/r8169: add PMD driver skeleton Howard Wang
2024-11-12 16:44 ` Stephen Hemminger
2024-11-12 23:55 ` Ferruh Yigit
2024-11-12 9:57 ` [PATCH v7 02/17] net/r8169: add logging structure Howard Wang
2024-11-12 23:07 ` Ferruh Yigit
2024-11-12 9:57 ` [PATCH v7 03/17] net/r8169: add hardware registers access routines Howard Wang
2024-11-12 9:57 ` [PATCH v7 04/17] net/r8169: implement core logic for Tx/Rx Howard Wang
2024-11-12 9:57 ` [PATCH v7 05/17] net/r8169: add support for HW config Howard Wang
2024-11-12 9:57 ` [PATCH v7 06/17] net/r8169: add PHY registers access routines Howard Wang
2024-11-12 9:57 ` [PATCH v7 07/17] net/r8169: add support for hardware operations Howard Wang
2024-11-12 23:38 ` Ferruh Yigit
2024-11-12 9:57 ` [PATCH v7 08/17] net/r8169: add support for PHY configuration Howard Wang
2024-11-12 23:40 ` Ferruh Yigit
2024-11-12 9:57 ` [PATCH v7 09/17] net/r8169: add support for HW initialization Howard Wang
2024-11-12 9:57 ` [PATCH v7 10/17] net/r8169: add link status and interrupt management Howard Wang
2024-11-12 9:57 ` [PATCH v7 11/17] net/r8169: implement Rx path Howard Wang
2024-11-13 0:04 ` Ferruh Yigit
2024-11-12 9:57 ` [PATCH v7 12/17] net/r8169: implement Tx path Howard Wang
2024-11-12 9:58 ` [PATCH v7 13/17] net/r8169: implement device statistics Howard Wang
2024-11-12 9:58 ` Howard Wang [this message]
2024-11-13 0:08 ` [PATCH v7 14/17] net/r8169: implement promisc and allmulti modes Ferruh Yigit
2024-11-12 9:58 ` [PATCH v7 15/17] net/r8169: implement MTU configuration Howard Wang
2024-11-12 9:58 ` [PATCH v7 16/17] net/r8169: add support for getting FW version Howard Wang
2024-11-12 9:58 ` [PATCH v7 17/17] net/r8169: add driver start and driver stop Howard Wang
2024-11-13 0:22 ` [PATCH v7 00/17] modify code as suggested by the maintainer Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241112095804.42091-15-howard_wang@realsil.com.cn \
--to=howard_wang@realsil.com.cn \
--cc=dev@dpdk.org \
--cc=pro_nic_dpdk@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).