DPDK patches and discussions
 help / color / mirror / Atom feed
From: Howard Wang <howard_wang@realsil.com.cn>
To: <dev@dpdk.org>
Cc: <pro_nic_dpdk@realtek.com>, Howard Wang <howard_wang@realsil.com.cn>
Subject: [PATCH v8 15/17] net/r8169: implement MTU configuration
Date: Wed, 13 Nov 2024 17:28:52 +0800	[thread overview]
Message-ID: <20241113092854.91445-16-howard_wang@realsil.com.cn> (raw)
In-Reply-To: <20241113092854.91445-1-howard_wang@realsil.com.cn>

Add support for updating MTU value.

Signed-off-by: Howard Wang <howard_wang@realsil.com.cn>
---
 doc/guides/nics/features/r8169.ini |  1 +
 drivers/net/r8169/r8169_ethdev.c   | 20 ++++++++++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/doc/guides/nics/features/r8169.ini b/doc/guides/nics/features/r8169.ini
index 0ab596b692..a509107dea 100644
--- a/doc/guides/nics/features/r8169.ini
+++ b/doc/guides/nics/features/r8169.ini
@@ -8,6 +8,7 @@ Speed capabilities   = Y
 Link speed configuration = Y
 Link status          = Y
 Link status event    = Y
+MTU update           = Y
 Scattered Rx         = Y
 TSO                  = Y
 Promiscuous mode     = Y
diff --git a/drivers/net/r8169/r8169_ethdev.c b/drivers/net/r8169/r8169_ethdev.c
index c90c3c9d03..8daf1c26ab 100644
--- a/drivers/net/r8169/r8169_ethdev.c
+++ b/drivers/net/r8169/r8169_ethdev.c
@@ -42,6 +42,7 @@ static int rtl_promiscuous_enable(struct rte_eth_dev *dev);
 static int rtl_promiscuous_disable(struct rte_eth_dev *dev);
 static int rtl_allmulticast_enable(struct rte_eth_dev *dev);
 static int rtl_allmulticast_disable(struct rte_eth_dev *dev);
+static int rtl_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 
 /*
  * The set of PCI devices this driver supports
@@ -88,6 +89,8 @@ static const struct eth_dev_ops rtl_eth_dev_ops = {
 	.stats_get            = rtl_dev_stats_get,
 	.stats_reset          = rtl_dev_stats_reset,
 
+	.mtu_set              = rtl_dev_mtu_set,
+
 	.rx_queue_setup       = rtl_rx_queue_setup,
 	.rx_queue_release     = rtl_rx_queue_release,
 	.rxq_info_get         = rtl_rxq_info_get,
@@ -374,6 +377,9 @@ rtl_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		break;
 	}
 
+	dev_info->min_mtu = RTE_ETHER_MIN_MTU;
+	dev_info->max_mtu = dev_info->max_rx_pktlen - RTL_ETH_OVERHEAD;
+
 	dev_info->rx_offload_capa = (rtl_get_rx_port_offloads() |
 				     dev_info->rx_queue_offload_capa);
 	dev_info->tx_offload_capa = rtl_get_tx_port_offloads();
@@ -596,6 +602,20 @@ rtl_dev_close(struct rte_eth_dev *dev)
 	return ret_stp;
 }
 
+static int
+rtl_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct rtl_adapter *adapter = RTL_DEV_PRIVATE(dev);
+	struct rtl_hw *hw = &adapter->hw;
+	uint32_t frame_size = mtu + RTL_ETH_OVERHEAD;
+
+	hw->mtu = mtu;
+
+	RTL_W16(hw, RxMaxSize, frame_size);
+
+	return 0;
+}
+
 static int
 rtl_dev_init(struct rte_eth_dev *dev)
 {
-- 
2.34.1


  parent reply	other threads:[~2024-11-13  9:33 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-13  9:28 [PATCH v8 00/17] modify something as suggested Howard Wang
2024-11-13  9:28 ` [PATCH v8 01/17] net/r8169: add PMD driver skeleton Howard Wang
2024-11-13  9:28 ` [PATCH v8 02/17] net/r8169: add logging structure Howard Wang
2024-11-13  9:28 ` [PATCH v8 03/17] net/r8169: add hardware registers access routines Howard Wang
2024-11-13  9:28 ` [PATCH v8 04/17] net/r8169: implement core logic for Tx/Rx Howard Wang
2024-11-13  9:28 ` [PATCH v8 05/17] net/r8169: add support for HW config Howard Wang
2024-11-13  9:28 ` [PATCH v8 06/17] net/r8169: add PHY registers access routines Howard Wang
2024-11-13  9:28 ` [PATCH v8 07/17] net/r8169: add support for hardware operations Howard Wang
2024-11-13  9:28 ` [PATCH v8 08/17] net/r8169: add support for PHY configuration Howard Wang
2024-11-13  9:28 ` [PATCH v8 09/17] net/r8169: add support for HW initialization Howard Wang
2024-11-13  9:28 ` [PATCH v8 10/17] net/r8169: add link status and interrupt management Howard Wang
2024-11-13  9:28 ` [PATCH v8 11/17] net/r8169: implement Rx path Howard Wang
2024-11-13  9:28 ` [PATCH v8 12/17] net/r8169: implement Tx path Howard Wang
2024-11-13  9:28 ` [PATCH v8 13/17] net/r8169: implement device statistics Howard Wang
2024-11-13  9:28 ` [PATCH v8 14/17] net/r8169: implement promisc and allmulti modes Howard Wang
2024-11-13  9:28 ` Howard Wang [this message]
2024-11-13  9:28 ` [PATCH v8 16/17] net/r8169: add support for getting FW version Howard Wang
2024-11-13  9:28 ` [PATCH v8 17/17] net/r8169: add driver start and driver stop Howard Wang
2024-11-13 21:15 ` [PATCH v8 00/17] modify something as suggested Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241113092854.91445-16-howard_wang@realsil.com.cn \
    --to=howard_wang@realsil.com.cn \
    --cc=dev@dpdk.org \
    --cc=pro_nic_dpdk@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).