From: "WanRenyong" <wanry@yunsilicon.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@amd.com>, <thomas@monjalon.net>,
<andrew.rybchenko@oktetlabs.ru>, <qianr@yunsilicon.com>,
<nana@yunsilicon.com>, <zhangxx@yunsilicon.com>,
<zhangxx@yunsilicon.com>, <xudw@yunsilicon.com>,
<jacky@yunsilicon.com>, <weihg@yunsilicon.com>
Subject: [PATCH v4 14/15] net/xsc: add ethdev infos get
Date: Fri, 03 Jan 2025 23:04:35 +0800 [thread overview]
Message-ID: <20250103150434.1529663-15-wanry@yunsilicon.com> (raw)
In-Reply-To: <20250103150404.1529663-1-wanry@yunsilicon.com>
Implement xsc ethdev information get ops.
Signed-off-by: WanRenyong <wanry@yunsilicon.com>
---
drivers/net/xsc/xsc_ethdev.c | 61 ++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/net/xsc/xsc_ethdev.c b/drivers/net/xsc/xsc_ethdev.c
index e44792e374..f4c127d7d4 100644
--- a/drivers/net/xsc/xsc_ethdev.c
+++ b/drivers/net/xsc/xsc_ethdev.c
@@ -390,6 +390,66 @@ xsc_ethdev_close(struct rte_eth_dev *dev)
return 0;
}
+static uint64_t
+xsc_get_rx_queue_offloads(struct rte_eth_dev *dev)
+{
+ struct xsc_ethdev_priv *priv = TO_XSC_ETHDEV_PRIV(dev);
+ struct xsc_dev_config *config = &priv->config;
+ uint64_t offloads = 0;
+
+ if (config->hw_csum)
+ offloads |= (RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
+ RTE_ETH_RX_OFFLOAD_UDP_CKSUM |
+ RTE_ETH_RX_OFFLOAD_TCP_CKSUM);
+
+ return offloads;
+}
+
+static uint64_t
+xsc_get_tx_port_offloads(struct rte_eth_dev *dev)
+{
+ struct xsc_ethdev_priv *priv = TO_XSC_ETHDEV_PRIV(dev);
+ uint64_t offloads = 0;
+ struct xsc_dev_config *config = &priv->config;
+
+ if (config->hw_csum)
+ offloads |= (RTE_ETH_TX_OFFLOAD_IPV4_CKSUM |
+ RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
+ RTE_ETH_TX_OFFLOAD_TCP_CKSUM);
+ if (config->tso)
+ offloads |= RTE_ETH_TX_OFFLOAD_TCP_TSO;
+ return offloads;
+}
+
+static int
+xsc_ethdev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct xsc_ethdev_priv *priv = TO_XSC_ETHDEV_PRIV(dev);
+
+ info->min_rx_bufsize = 64;
+ info->max_rx_pktlen = 65536;
+ info->max_lro_pkt_size = 0;
+ info->max_rx_queues = 256;
+ info->max_tx_queues = 1024;
+ info->rx_desc_lim.nb_max = 4096;
+ info->rx_desc_lim.nb_min = 16;
+ info->tx_desc_lim.nb_max = 8192;
+ info->tx_desc_lim.nb_min = 128;
+
+ info->rx_queue_offload_capa = xsc_get_rx_queue_offloads(dev);
+ info->rx_offload_capa = info->rx_queue_offload_capa;
+ info->tx_offload_capa = xsc_get_tx_port_offloads(dev);
+
+ info->if_index = priv->ifindex;
+ info->speed_capa = priv->xdev->link_speed_capa;
+ info->hash_key_size = XSC_RSS_HASH_KEY_LEN;
+ info->tx_desc_lim.nb_seg_max = 8;
+ info->tx_desc_lim.nb_mtu_seg_max = 8;
+ info->switch_info.name = dev->data->name;
+ info->switch_info.port_id = priv->representor_id;
+ return 0;
+}
+
static int
xsc_ethdev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
uint32_t socket, const struct rte_eth_rxconf *conf,
@@ -575,6 +635,7 @@ const struct eth_dev_ops xsc_eth_dev_ops = {
.dev_close = xsc_ethdev_close,
.stats_get = xsc_ethdev_stats_get,
.stats_reset = xsc_ethdev_stats_reset,
+ .dev_infos_get = xsc_ethdev_infos_get,
.rx_queue_setup = xsc_ethdev_rx_queue_setup,
.tx_queue_setup = xsc_ethdev_tx_queue_setup,
.rx_queue_release = xsc_ethdev_rxq_release,
--
2.25.1
next prev parent reply other threads:[~2025-01-03 15:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-03 15:04 [PATCH v4 00/15] XSC PMD for Yunsilicon NICs WanRenyong
2025-01-03 15:04 ` [PATCH v4 01/15] net/xsc: add xsc PMD framework WanRenyong
2025-01-03 19:00 ` Stephen Hemminger
2025-01-06 1:36 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 02/15] net/xsc: add xsc device initialization WanRenyong
2025-01-03 18:58 ` Stephen Hemminger
2025-01-06 3:29 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 03/15] net/xsc: add xsc mailbox WanRenyong
2025-01-03 15:04 ` [PATCH v4 04/15] net/xsc: add xsc dev ops to support VFIO driver WanRenyong
2025-01-03 19:02 ` Stephen Hemminger
2025-01-06 1:53 ` WanRenyong
2025-01-03 19:04 ` Stephen Hemminger
2025-01-06 2:01 ` WanRenyong
2025-01-03 19:06 ` Stephen Hemminger
2025-01-06 2:02 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 05/15] net/xsc: add PCT interfaces WanRenyong
2025-01-03 15:04 ` [PATCH v4 06/15] net/xsc: initialize xsc representors WanRenyong
2025-01-03 15:04 ` [PATCH v4 07/15] net/xsc: add ethdev configure and RSS ops WanRenyong
2025-01-03 19:14 ` Stephen Hemminger
2025-01-06 2:20 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 08/15] net/xsc: add Rx and Tx queue setup WanRenyong
2025-01-03 15:04 ` [PATCH v4 09/15] net/xsc: add ethdev start WanRenyong
2025-01-03 19:17 ` Stephen Hemminger
2025-01-06 3:01 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 10/15] net/xsc: add ethdev stop and close WanRenyong
2025-01-03 15:04 ` [PATCH v4 11/15] net/xsc: add ethdev Rx burst WanRenyong
2025-01-03 15:04 ` [PATCH v4 12/15] net/xsc: add ethdev Tx burst WanRenyong
2025-01-03 15:04 ` [PATCH v4 13/15] net/xsc: add basic stats ops WanRenyong
2025-01-03 15:04 ` WanRenyong [this message]
2025-01-03 19:22 ` [PATCH v4 14/15] net/xsc: add ethdev infos get Stephen Hemminger
2025-01-06 4:03 ` WanRenyong
2025-01-03 15:04 ` [PATCH v4 15/15] net/xsc: add ethdev link and MTU ops WanRenyong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250103150434.1529663-15-wanry@yunsilicon.com \
--to=wanry@yunsilicon.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=jacky@yunsilicon.com \
--cc=nana@yunsilicon.com \
--cc=qianr@yunsilicon.com \
--cc=thomas@monjalon.net \
--cc=weihg@yunsilicon.com \
--cc=xudw@yunsilicon.com \
--cc=zhangxx@yunsilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).