DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Morten Brørup" <mb@smartsharesystems.com>
To: dev@dpdk.org, Thomas Monjalon <thomas@monjalon.net>,
	Stephen Hemminger <stephen@networkplumber.org>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Konstantin Ananyev <konstantin.ananyev@huawei.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
	Ivan Malov <ivan.malov@arknetworks.am>
Cc: "Morten Brørup" <mb@smartsharesystems.com>
Subject: [PATCH v2] mbuf: de-inline sanity checking a reinitialized mbuf
Date: Sun, 20 Jul 2025 20:49:32 +0000	[thread overview]
Message-ID: <20250720204932.529441-1-mb@smartsharesystems.com> (raw)
In-Reply-To: <20250719102315.435921-1-mb@smartsharesystems.com>

Sanity checking a reinitialized mbuf (a.k.a. raw mbuf) has been refactored
to follow the same design pattern as sanity checking a normal mbuf, and
now depends on RTE_LIBRTE_MBUF_DEBUG instead of RTE_ENABLE_ASSERT.

The details of the changes are as follows:

Non-inlined functions rte_mbuf_raw_sanity_check() and rte_mbuf_raw_check()
have been added.
They do for a reinitialized mbuf what rte_mbuf_sanity_check() and
rte_mbuf_check() do for a normal mbuf.
They basically check the same conditions as __rte_mbuf_raw_sanity_check()
previously did, but use "if (!condition) rte_panic(message)" instead of
RTE_ASSERT(), so they don't depend on RTE_ENABLE_ASSERT.

The inline function __rte_mbuf_raw_sanity_check() has been replaced
by the new macro __rte_mbuf_raw_sanity_check_mp(), which either calls
rte_mbuf_raw_sanity_check() or does nothing, depending on
RTE_LIBRTE_MBUF_DEBUG, just like the __rte_mbuf_sanity_check() macro does
for a normal mbuf.

Note that the new macro __rte_mbuf_raw_sanity_check_mp() takes an optional
mempool parameter to verify that the mbuf belongs to the expected mbuf
pool.
This addition is mainly relevant for sanity checking reinitialized mbufs
freed directly into a given mempool by a PMD when using
RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE.

The macro __rte_mbuf_raw_sanity_check() has been kept for backwards API
compatibility.
It simply calls __rte_mbuf_raw_sanity_check_mp() without specifying a
mempool.

Since the new - experimental - function rte_mbuf_raw_sanity_check() is
called when RTE_LIBRTE_MBUF_DEBUG is defined, RTE_LIBRTE_MBUF_DEBUG now
requires ALLOW_EXPERIMENTAL_API until the function's experimental status
is removed.

Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
---
v2:
* Added explicit build check for ALLOW_EXPERIMENTAL_API being enabled when
  RTE_LIBRTE_MBUF_DEBUG is enabled, with descriptive error message if not
  so. (Ivan Malov)
* Fixed typo in patch description.
---
 lib/mbuf/rte_mbuf.c |  61 +++++++++++++++++++++++++
 lib/mbuf/rte_mbuf.h | 109 +++++++++++++++++++++++++++++---------------
 2 files changed, 132 insertions(+), 38 deletions(-)

diff --git a/lib/mbuf/rte_mbuf.c b/lib/mbuf/rte_mbuf.c
index 9e7731a8a2..ff4db73b50 100644
--- a/lib/mbuf/rte_mbuf.c
+++ b/lib/mbuf/rte_mbuf.c
@@ -373,6 +373,67 @@ rte_pktmbuf_pool_create_extbuf(const char *name, unsigned int n,
 	return mp;
 }
 
+/* do some sanity checks on a reinitialized mbuf: panic if it fails */
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_mbuf_raw_sanity_check, 25.11)
+void
+rte_mbuf_raw_sanity_check(const struct rte_mbuf *m, const struct rte_mempool *mp)
+{
+	const char *reason;
+
+	if (rte_mbuf_raw_check(m, mp, &reason))
+		rte_panic("%s\n", reason);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_mbuf_raw_check, 25.11)
+int rte_mbuf_raw_check(const struct rte_mbuf *m, const struct rte_mempool *mp,
+		   const char **reason)
+{
+	/* check sanity */
+	if (rte_mbuf_check(m, 0, reason) == -1)
+		return -1;
+
+	/* check initialized */
+	if (rte_mbuf_refcnt_read(m) != 1) {
+		*reason = "uninitialized ref cnt";
+		return -1;
+	}
+	if (m->next != NULL) {
+		*reason = "uninitialized next ptr";
+		return -1;
+	}
+	if (m->nb_segs != 1) {
+		*reason = "uninitialized nb_segs";
+		return -1;
+	}
+	if (RTE_MBUF_CLONED(m)) {
+		*reason = "cloned";
+		return -1;
+	}
+	if (RTE_MBUF_HAS_EXTBUF(m)) {
+		if (!RTE_MBUF_HAS_PINNED_EXTBUF(m)) {
+			*reason = "external buffer not pinned";
+			return -1;
+		}
+
+		uint16_t cnt = rte_mbuf_ext_refcnt_read(m->shinfo);
+		if ((cnt == 0) || (cnt == UINT16_MAX)) {
+			*reason = "pinned external buffer bad ref cnt";
+			return -1;
+		}
+		if (cnt != 1) {
+			*reason = "pinned external buffer uninitialized ref cnt";
+			return -1;
+		}
+	}
+
+	if (mp != NULL && m->pool != mp) {
+		*reason = "wrong mbuf pool";
+		return -1;
+	}
+
+	return 0;
+}
+
 /* do some sanity checks on a mbuf: panic if it fails */
 RTE_EXPORT_SYMBOL(rte_mbuf_sanity_check)
 void
diff --git a/lib/mbuf/rte_mbuf.h b/lib/mbuf/rte_mbuf.h
index 06ab7502a5..8344f60bc7 100644
--- a/lib/mbuf/rte_mbuf.h
+++ b/lib/mbuf/rte_mbuf.h
@@ -339,11 +339,22 @@ rte_pktmbuf_priv_flags(struct rte_mempool *mp)
 
 #ifdef RTE_LIBRTE_MBUF_DEBUG
 
+#ifndef ALLOW_EXPERIMENTAL_API
+/* Because rte_mbuf_raw_sanity_check() is an experimental API. */
+#error "RTE_LIBRTE_MBUF_DEBUG requires ALLOW_EXPERIMENTAL_API."
+#endif
+
+/**  check reinitialized mbuf type in debug mode */
+#define __rte_mbuf_raw_sanity_check_mp(m, mp) rte_mbuf_raw_sanity_check(m, mp)
+
 /**  check mbuf type in debug mode */
 #define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h)
 
 #else /*  RTE_LIBRTE_MBUF_DEBUG */
 
+/**  check reinitialized mbuf type in debug mode */
+#define __rte_mbuf_raw_sanity_check_mp(m, mp) do { } while (0)
+
 /**  check mbuf type in debug mode */
 #define __rte_mbuf_sanity_check(m, is_h) do { } while (0)
 
@@ -513,6 +524,54 @@ rte_mbuf_ext_refcnt_update(struct rte_mbuf_ext_shared_info *shinfo,
 } while (0)
 
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: This API may change, or be removed, without prior notice.
+ *
+ * Sanity checks on a reinitialized mbuf.
+ *
+ * Check the consistency of the given reinitialized mbuf.
+ * The function will cause a panic if corruption is detected.
+ *
+ * Check that the mbuf is properly reinitialized (refcnt=1, next=NULL,
+ * nb_segs=1), as done by rte_pktmbuf_prefree_seg().
+ *
+ * @param m
+ *   The mbuf to be checked.
+ * @param mp
+ *   The mempool to which the mbuf belongs.
+ *   NULL if unknown, not to be checked.
+ */
+__rte_experimental
+void
+rte_mbuf_raw_sanity_check(const struct rte_mbuf *m, const struct rte_mempool *mp);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: This API may change, or be removed, without prior notice.
+ *
+ * Sanity checks on a reinitialized mbuf.
+ *
+ * Almost like rte_mbuf_raw_sanity_check(), but this function gives the reason
+ * if corruption is detected rather than panic.
+ *
+ * @param m
+ *   The mbuf to be checked.
+ * @param mp
+ *   The mempool to which the mbuf belongs.
+ *   NULL if unknown, not to be checked.
+ * @param reason
+ *   A reference to a string pointer where to store the reason why a mbuf is
+ *   considered invalid.
+ * @return
+ *   - 0 if no issue has been found, reason is left untouched.
+ *   - -1 if a problem is detected, reason then points to a string describing
+ *     the reason why the mbuf is deemed invalid.
+ */
+__rte_experimental
+int rte_mbuf_raw_check(const struct rte_mbuf *m, const struct rte_mempool *mp,
+		   const char **reason);
+
 /**
  * Sanity checks on an mbuf.
  *
@@ -550,33 +609,11 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
 int rte_mbuf_check(const struct rte_mbuf *m, int is_header,
 		   const char **reason);
 
-/**
- * Sanity checks on a reinitialized mbuf in debug mode.
- *
- * Check the consistency of the given reinitialized mbuf.
- * The function will cause a panic if corruption is detected.
- *
- * Check that the mbuf is properly reinitialized (refcnt=1, next=NULL,
- * nb_segs=1), as done by rte_pktmbuf_prefree_seg().
- *
- * @param m
- *   The mbuf to be checked.
- */
-static __rte_always_inline void
-__rte_mbuf_raw_sanity_check(__rte_unused const struct rte_mbuf *m)
-{
-	RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1);
-	RTE_ASSERT(m->next == NULL);
-	RTE_ASSERT(m->nb_segs == 1);
-	RTE_ASSERT(!RTE_MBUF_CLONED(m));
-	RTE_ASSERT(!RTE_MBUF_HAS_EXTBUF(m) ||
-			(RTE_MBUF_HAS_PINNED_EXTBUF(m) &&
-			rte_mbuf_ext_refcnt_read(m->shinfo) == 1));
-	__rte_mbuf_sanity_check(m, 0);
-}
+/** For backwards compatibility. */
+#define __rte_mbuf_raw_sanity_check(m) __rte_mbuf_raw_sanity_check_mp(m, NULL)
 
 /** For backwards compatibility. */
-#define MBUF_RAW_ALLOC_CHECK(m) __rte_mbuf_raw_sanity_check(m)
+#define MBUF_RAW_ALLOC_CHECK(m) __rte_mbuf_raw_sanity_check_mp(m, NULL)
 
 /**
  * Allocate an uninitialized mbuf from mempool *mp*.
@@ -606,7 +643,7 @@ static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp)
 
 	if (rte_mempool_get(mp, &ret.ptr) < 0)
 		return NULL;
-	__rte_mbuf_raw_sanity_check(ret.m);
+	__rte_mbuf_raw_sanity_check_mp(ret.m, mp);
 	return ret.m;
 }
 
@@ -644,7 +681,7 @@ rte_mbuf_raw_alloc_bulk(struct rte_mempool *mp, struct rte_mbuf **mbufs, unsigne
 	int rc = rte_mempool_get_bulk(mp, (void **)mbufs, count);
 	if (likely(rc == 0))
 		for (unsigned int idx = 0; idx < count; idx++)
-			__rte_mbuf_raw_sanity_check(mbufs[idx]);
+			__rte_mbuf_raw_sanity_check_mp(mbufs[idx], mp);
 	return rc;
 }
 
@@ -665,7 +702,7 @@ rte_mbuf_raw_alloc_bulk(struct rte_mempool *mp, struct rte_mbuf **mbufs, unsigne
 static __rte_always_inline void
 rte_mbuf_raw_free(struct rte_mbuf *m)
 {
-	__rte_mbuf_raw_sanity_check(m);
+	__rte_mbuf_raw_sanity_check_mp(m, NULL);
 	rte_mempool_put(m->pool, m);
 }
 
@@ -696,12 +733,8 @@ __rte_experimental
 static __rte_always_inline void
 rte_mbuf_raw_free_bulk(struct rte_mempool *mp, struct rte_mbuf **mbufs, unsigned int count)
 {
-	for (unsigned int idx = 0; idx < count; idx++) {
-		const struct rte_mbuf *m = mbufs[idx];
-		RTE_ASSERT(m != NULL);
-		RTE_ASSERT(m->pool == mp);
-		__rte_mbuf_raw_sanity_check(m);
-	}
+	for (unsigned int idx = 0; idx < count; idx++)
+		__rte_mbuf_raw_sanity_check_mp(mbufs[idx], mp);
 
 	rte_mempool_put_bulk(mp, (void **)mbufs, count);
 }
@@ -1021,22 +1054,22 @@ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool,
 	switch (count % 4) {
 	case 0:
 		while (idx != count) {
-			__rte_mbuf_raw_sanity_check(mbufs[idx]);
+			__rte_mbuf_raw_sanity_check_mp(mbufs[idx], pool);
 			rte_pktmbuf_reset(mbufs[idx]);
 			idx++;
 			/* fall-through */
 	case 3:
-			__rte_mbuf_raw_sanity_check(mbufs[idx]);
+			__rte_mbuf_raw_sanity_check_mp(mbufs[idx], pool);
 			rte_pktmbuf_reset(mbufs[idx]);
 			idx++;
 			/* fall-through */
 	case 2:
-			__rte_mbuf_raw_sanity_check(mbufs[idx]);
+			__rte_mbuf_raw_sanity_check_mp(mbufs[idx], pool);
 			rte_pktmbuf_reset(mbufs[idx]);
 			idx++;
 			/* fall-through */
 	case 1:
-			__rte_mbuf_raw_sanity_check(mbufs[idx]);
+			__rte_mbuf_raw_sanity_check_mp(mbufs[idx], pool);
 			rte_pktmbuf_reset(mbufs[idx]);
 			idx++;
 			/* fall-through */
-- 
2.43.0


      parent reply	other threads:[~2025-07-20 20:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-19 10:23 [PATCH] " Morten Brørup
2025-07-19 14:14 ` Morten Brørup
2025-07-19 22:30   ` Ivan Malov
2025-07-20  9:25     ` Morten Brørup
2025-07-20 13:09       ` Ivan Malov
2025-07-21 15:00   ` Stephen Hemminger
2025-07-20 20:49 ` Morten Brørup [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250720204932.529441-1-mb@smartsharesystems.com \
    --to=mb@smartsharesystems.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ivan.malov@arknetworks.am \
    --cc=konstantin.ananyev@huawei.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).