From: Sameer Vaze <svaze@qti.qualcomm.com>
To: Sunila Sahu <ssahu@marvell.com>,
Fan Zhang <fanzhang.oss@gmail.com>,
Ashish Gupta <ashishg@marvell.com>
Cc: dev@dpdk.org, Sameer Vaze <svaze@qti.qualcomm.com>
Subject: [PATCH 2/3] compress/zlib: support for dictionaries and PDCP checksum
Date: Fri, 19 Sep 2025 11:28:01 -0600 [thread overview]
Message-ID: <20250919172802.2461479-2-svaze@qti.qualcomm.com> (raw)
In-Reply-To: <20250919172802.2461479-1-svaze@qti.qualcomm.com>
Support to calculate PDCP checksums. Includes changes to
pass in dictionaries. Adds support for sync flush
Signed-off-by: Sameer Vaze <svaze@qti.qualcomm.com>
---
drivers/compress/zlib/zlib_pmd.c | 171 +++++++++++++++++++++--
drivers/compress/zlib/zlib_pmd_private.h | 8 ++
2 files changed, 170 insertions(+), 9 deletions(-)
diff --git a/drivers/compress/zlib/zlib_pmd.c b/drivers/compress/zlib/zlib_pmd.c
index 92e808e78c..65f3999428 100644
--- a/drivers/compress/zlib/zlib_pmd.c
+++ b/drivers/compress/zlib/zlib_pmd.c
@@ -4,6 +4,7 @@
#include <bus_vdev_driver.h>
#include <rte_common.h>
+#include <rte_malloc.h>
#include "zlib_pmd_private.h"
@@ -15,6 +16,118 @@
(data = rte_pktmbuf_mtod(mbuf, uint8_t *)), \
(len = rte_pktmbuf_data_len(mbuf)) : 0)
+#define BOTTOM_NIBBLE_OF_BYTE 0xf
+#define TOP_NIBBLE_OF_BYTE 0xf0
+
+static void
+process_zlib_deflate_chksum(struct rte_comp_op *op,
+ z_stream *strm, enum rte_comp_checksum_type chksum)
+{
+ uint32_t dictionary_len = 0;
+ op->status = RTE_COMP_OP_STATUS_SUCCESS;
+
+ switch (chksum) {
+ case RTE_COMP_CHECKSUM_3GPP_PDCP_UDC:
+ {
+ uint8_t *dictionary = malloc(DEFLATE_MAX_WINDOW_SIZE);
+
+ if (!dictionary) {
+ ZLIB_PMD_ERR("Unable to fetch dictionary");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return;
+ }
+
+ if (deflateGetDictionary(strm, dictionary, &dictionary_len)) {
+ ZLIB_PMD_ERR("Unable to fetch dictionary");
+ op->status = RTE_COMP_OP_STATUS_CHECK_SUM_VALIDATION_FAILED;
+ rte_free(dictionary);
+ return;
+ }
+
+ uint32_t dictionary_start = (uint32_t)(*dictionary);
+ uint32_t dictionary_end = (uint32_t)(*(dictionary + dictionary_len - 4));
+ uint32_t sum = (dictionary_start & 0x0F0F0F0F)
+ + (dictionary_start & (0xF0F0F0F0 >> 4))
+ + (dictionary_end & 0x0F0F0F0F)
+ + (dictionary_end & (0xF0F0F0F0 >> 4));
+ uint8_t *sum_bytes = (uint8_t *)∑
+
+ op->output_chksum = ~(sum_bytes[0] + sum_bytes[1] + sum_bytes[2] + sum_bytes[3])
+ & BOTTOM_NIBBLE_OF_BYTE;
+
+ rte_free(dictionary);
+
+ break;
+ }
+ case RTE_COMP_CHECKSUM_NONE:
+ case RTE_COMP_CHECKSUM_CRC32:
+ case RTE_COMP_CHECKSUM_ADLER32:
+ case RTE_COMP_CHECKSUM_CRC32_ADLER32:
+ default:
+ ZLIB_PMD_ERR("Checksum not supported");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+}
+
+static void
+process_zlib_inflate_chksum(struct rte_comp_op *op,
+ z_stream *strm,
+ enum rte_comp_checksum_type chksum)
+{
+ uint32_t dictionary_len = 0;
+ op->status = RTE_COMP_OP_STATUS_SUCCESS;
+
+ switch (chksum) {
+ case RTE_COMP_CHECKSUM_3GPP_PDCP_UDC:
+ {
+ uint8_t *dictionary = malloc(DEFLATE_MAX_WINDOW_SIZE);
+
+ if (!dictionary) {
+ ZLIB_PMD_ERR("Unable to fetch dictionary");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return;
+ }
+
+ if (inflateGetDictionary(strm, dictionary, &dictionary_len)) {
+ ZLIB_PMD_ERR("Unable to fetch dictionary");
+ op->status = RTE_COMP_OP_STATUS_CHECK_SUM_VALIDATION_FAILED;
+ rte_free(dictionary);
+ return;
+ }
+
+ uint32_t dictionary_start = (uint32_t)(*dictionary);
+ uint32_t dictionary_end = (uint32_t)(*(dictionary + dictionary_len - 4));
+ uint32_t sum = (dictionary_start & 0x0F0F0F0F)
+ + (dictionary_start & (0xF0F0F0F0 >> 4))
+ + (dictionary_end & 0x0F0F0F0F)
+ + (dictionary_end & (0xF0F0F0F0 >> 4));
+ uint8_t *sum_bytes = (uint8_t *)∑
+
+ op->output_chksum = ~(sum_bytes[0] + sum_bytes[1] + sum_bytes[2] + sum_bytes[3])
+ & BOTTOM_NIBBLE_OF_BYTE;
+
+ if (op->input_chksum != op->output_chksum) {
+ ZLIB_PMD_ERR("Checksum does not match");
+ op->status = RTE_COMP_OP_STATUS_CHECK_SUM_VALIDATION_FAILED;
+ rte_free(dictionary);
+ return;
+ }
+ rte_free(dictionary);
+
+ break;
+ }
+ case RTE_COMP_CHECKSUM_NONE:
+ case RTE_COMP_CHECKSUM_CRC32:
+ case RTE_COMP_CHECKSUM_ADLER32:
+ case RTE_COMP_CHECKSUM_CRC32_ADLER32:
+ default:
+ ZLIB_PMD_ERR("Checksum not supported");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+}
+
static void
process_zlib_deflate(struct rte_comp_op *op, z_stream *strm)
{
@@ -27,6 +140,9 @@ process_zlib_deflate(struct rte_comp_op *op, z_stream *strm)
case RTE_COMP_FLUSH_FINAL:
fin_flush = Z_FINISH;
break;
+ case RTE_COMP_FLUSH_SYNC:
+ fin_flush = Z_SYNC_FLUSH;
+ break;
default:
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
ZLIB_PMD_ERR("Invalid flush value");
@@ -49,6 +165,9 @@ process_zlib_deflate(struct rte_comp_op *op, z_stream *strm)
strm->avail_out = rte_pktmbuf_data_len(mbuf_dst) - op->dst.offset;
+ uLong total_in_at_start = strm->total_in;
+ uLong total_out_at_start = strm->total_out;
+
/* Set flush value to NO_FLUSH unless it is last mbuf */
flush = Z_NO_FLUSH;
/* Initialize status to SUCCESS */
@@ -56,8 +175,8 @@ process_zlib_deflate(struct rte_comp_op *op, z_stream *strm)
do {
/* Set flush value to Z_FINISH for last block */
- if ((op->src.length - strm->total_in) <= strm->avail_in) {
- strm->avail_in = (op->src.length - strm->total_in);
+ if ((op->src.length - (strm->total_in - total_in_at_start)) <= strm->avail_in) {
+ strm->avail_in = (op->src.length - (strm->total_in - total_in_at_start));
flush = fin_flush;
}
do {
@@ -92,17 +211,18 @@ process_zlib_deflate(struct rte_comp_op *op, z_stream *strm)
/* Update op stats */
switch (op->status) {
case RTE_COMP_OP_STATUS_SUCCESS:
- op->consumed += strm->total_in;
+ op->consumed += strm->total_in - total_in_at_start;
/* Fall-through */
case RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED:
- op->produced += strm->total_out;
+ op->produced += strm->total_out - total_out_at_start;
break;
default:
ZLIB_PMD_ERR("stats not updated for status:%d",
op->status);
}
- deflateReset(strm);
+ if (op->flush_flag != RTE_COMP_FLUSH_SYNC)
+ deflateReset(strm);
}
static void
@@ -127,6 +247,9 @@ process_zlib_inflate(struct rte_comp_op *op, z_stream *strm)
strm->avail_out = rte_pktmbuf_data_len(mbuf_dst) - op->dst.offset;
+ uLong total_in_at_start = strm->total_in;
+ uLong total_out_at_start = strm->total_out;
+
/** Ignoring flush value provided from application for decompression */
flush = Z_NO_FLUSH;
/* initialize status to SUCCESS */
@@ -178,17 +301,18 @@ process_zlib_inflate(struct rte_comp_op *op, z_stream *strm)
/* Update op stats */
switch (op->status) {
case RTE_COMP_OP_STATUS_SUCCESS:
- op->consumed += strm->total_in;
+ op->consumed += strm->total_in - total_in_at_start;
/* Fall-through */
case RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED:
- op->produced += strm->total_out;
+ op->produced += strm->total_out - total_out_at_start;
break;
default:
ZLIB_PMD_ERR("stats not produced for status:%d",
op->status);
}
- inflateReset(strm);
+ if (op->flush_flag != RTE_COMP_FLUSH_SYNC)
+ inflateReset(strm);
}
/** Process comp operation for mbuf */
@@ -203,10 +327,14 @@ process_zlib_op(struct zlib_qp *qp, struct rte_comp_op *op)
(op->dst.offset > rte_pktmbuf_data_len(op->m_dst))) {
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
ZLIB_PMD_ERR("Invalid source or destination buffers or "
- "invalid Operation requested");
+ "invalid Operation requested");
} else {
private_xform = (struct zlib_priv_xform *)op->private_xform;
stream = &private_xform->stream;
+ stream->chksum(op, &stream->strm, stream->chksum_type);
+ if (op->status != RTE_COMP_OP_STATUS_SUCCESS)
+ return -1;
+
stream->comp(op, &stream->strm);
}
/* whatever is out of op, put it into completion queue with
@@ -232,6 +360,7 @@ zlib_set_stream_parameters(const struct rte_comp_xform *xform,
case RTE_COMP_COMPRESS:
stream->comp = process_zlib_deflate;
stream->free = deflateEnd;
+ stream->chksum = process_zlib_deflate_chksum;
/** Compression window bits */
switch (xform->compress.algo) {
case RTE_COMP_ALGO_DEFLATE:
@@ -281,17 +410,30 @@ zlib_set_stream_parameters(const struct rte_comp_xform *xform,
ZLIB_PMD_ERR("Compression strategy not supported");
return -1;
}
+
+ /** Checksum used */
+ stream->chksum_type = xform->compress.chksum;
+
if (deflateInit2(strm, level,
Z_DEFLATED, wbits,
DEF_MEM_LEVEL, strategy) != Z_OK) {
ZLIB_PMD_ERR("Deflate init failed");
return -1;
}
+
+ if (xform->compress.dictionary) {
+ if (deflateSetDictionary(strm, xform->compress.dictionary,
+ xform->compress.dictionary_len)) {
+ ZLIB_PMD_ERR("Deflate set dictionary failed");
+ return -1;
+ }
+ }
break;
case RTE_COMP_DECOMPRESS:
stream->comp = process_zlib_inflate;
stream->free = inflateEnd;
+ stream->chksum = process_zlib_inflate_chksum;
/** window bits */
switch (xform->decompress.algo) {
case RTE_COMP_ALGO_DEFLATE:
@@ -302,10 +444,21 @@ zlib_set_stream_parameters(const struct rte_comp_xform *xform,
return -1;
}
+ /** Checksum used */
+ stream->chksum_type = xform->decompress.chksum;
+
if (inflateInit2(strm, wbits) != Z_OK) {
ZLIB_PMD_ERR("Inflate init failed");
return -1;
}
+
+ if (xform->decompress.dictionary) {
+ if (inflateSetDictionary(strm, xform->decompress.dictionary,
+ xform->decompress.dictionary_len)) {
+ ZLIB_PMD_ERR("inflate set dictionary failed");
+ return -1;
+ }
+ }
break;
default:
return -1;
diff --git a/drivers/compress/zlib/zlib_pmd_private.h b/drivers/compress/zlib/zlib_pmd_private.h
index fd8c4c55a4..99bfdc9a76 100644
--- a/drivers/compress/zlib/zlib_pmd_private.h
+++ b/drivers/compress/zlib/zlib_pmd_private.h
@@ -46,6 +46,10 @@ typedef void (*comp_func_t)(struct rte_comp_op *op, z_stream *strm);
typedef int (*comp_free_t)(z_stream *strm);
+typedef void (*chksum_func_t)
+ (struct rte_comp_op *op, z_stream *strm, enum rte_comp_checksum_type chksum);
+
+
/** ZLIB Stream structure */
struct __rte_cache_aligned zlib_stream {
z_stream strm;
@@ -54,6 +58,10 @@ struct __rte_cache_aligned zlib_stream {
/**< Operation (compression/decompression) */
comp_free_t free;
/**< Free Operation (compression/decompression) */
+ chksum_func_t chksum;
+ /**< Checksum Operation (compression/decompression) */
+ enum rte_comp_checksum_type chksum_type;
+ /**< Type of checksum to generate on the uncompressed data */
};
/** ZLIB private xform structure */
--
2.31.1
next prev parent reply other threads:[~2025-09-19 17:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-19 17:28 [PATCH 1/3] compressdev: " Sameer Vaze
2025-09-19 17:28 ` Sameer Vaze [this message]
2025-09-19 17:28 ` [PATCH 3/3] app/compres-perf: " Sameer Vaze
2025-09-19 17:30 ` [PATCH 3/3] app/compress-perf: " Sameer Vaze
2025-09-19 17:34 [PATCH 1/3] compressdev: " Sameer Vaze
2025-09-19 17:34 ` [PATCH 2/3] compress/zlib: " Sameer Vaze
2025-09-19 18:48 [PATCH 1/3] compressdev: " Sameer Vaze
2025-09-19 18:48 ` [PATCH 2/3] compress/zlib: " Sameer Vaze
2025-09-19 21:02 [PATCH 1/3] compressdev: " Sameer Vaze
2025-09-19 21:02 ` [PATCH 2/3] compress/zlib: " Sameer Vaze
2025-09-19 21:08 [PATCH 1/3] compressdev: " Sameer Vaze
2025-09-19 21:08 ` [PATCH 2/3] compress/zlib: " Sameer Vaze
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250919172802.2461479-2-svaze@qti.qualcomm.com \
--to=svaze@qti.qualcomm.com \
--cc=ashishg@marvell.com \
--cc=dev@dpdk.org \
--cc=fanzhang.oss@gmail.com \
--cc=ssahu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).