From: Zaiyu Wang <zaiyuwang@trustnetic.com>
To: dev@dpdk.org
Cc: Zaiyu Wang <zaiyuwang@trustnetic.com>,
Jiawen Wu <jiawenwu@trustnetic.com>,
Jian Wang <jianwang@trustnetic.com>
Subject: [PATCH v4 08/20] net/txgbe: add hardware reset change for Amber-Lite NICs
Date: Tue, 30 Sep 2025 17:59:40 +0800 [thread overview]
Message-ID: <20250930095953.18508-9-zaiyuwang@trustnetic.com> (raw)
In-Reply-To: <20250930095953.18508-1-zaiyuwang@trustnetic.com>
Add necessary configurations for Amber-Lite's hardware reset
process, which differs from the 10G NIC's. These configurations
may be modified in future to accommodate further changes.
Signed-off-by: Zaiyu Wang <zaiyuwang@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_hw.c | 64 +++++++++++++++++++++++------
drivers/net/txgbe/base/txgbe_regs.h | 2 +
2 files changed, 53 insertions(+), 13 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index be8409c28e..1fcc2feb98 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -276,6 +276,8 @@ s32 txgbe_start_hw(struct txgbe_hw *hw)
/* Cache bit indicating need for crosstalk fix */
switch (hw->mac.type) {
case txgbe_mac_sp:
+ case txgbe_mac_aml:
+ case txgbe_mac_aml40:
hw->mac.get_device_caps(hw, &device_caps);
if (device_caps & TXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
hw->need_crosstalk_fix = false;
@@ -3507,13 +3509,37 @@ txgbe_reset_misc(struct txgbe_hw *hw)
{
int i;
u32 value;
+ int err = 0;
+ u32 speed;
wr32(hw, TXGBE_ISBADDRL, hw->isb_dma & 0x00000000FFFFFFFF);
wr32(hw, TXGBE_ISBADDRH, hw->isb_dma >> 32);
- value = rd32_epcs(hw, SR_XS_PCS_CTRL2);
- if ((value & 0x3) != SR_PCS_CTRL2_TYPE_SEL_X)
- hw->link_status = TXGBE_LINK_STATUS_NONE;
+ if (hw->mac.type == txgbe_mac_aml) {
+ if ((rd32(hw, TXGBE_EPHY_STAT) & TXGBE_EPHY_STAT_PPL_LOCK)
+ != TXGBE_EPHY_STAT_PPL_LOCK) {
+ speed = TXGBE_LINK_SPEED_25GB_FULL
+ | TXGBE_LINK_SPEED_10GB_FULL;
+ err = hw->mac.setup_link(hw, speed, false);
+ if (err) {
+ DEBUGOUT("setup phy failed");
+ return;
+ }
+ }
+ } else if (hw->mac.type == txgbe_mac_aml40) {
+ if (!(rd32(hw, TXGBE_EPHY_STAT) & TXGBE_EPHY_STAT_PPL_LOCK)) {
+ speed = TXGBE_LINK_SPEED_40GB_FULL;
+ err = hw->mac.setup_link(hw, speed, false);
+ if (err) {
+ DEBUGOUT("setup phy failed");
+ return;
+ }
+ }
+ } else {
+ value = rd32_epcs(hw, SR_XS_PCS_CTRL2);
+ if ((value & 0x3) != SR_PCS_CTRL2_TYPE_SEL_X)
+ hw->link_status = TXGBE_LINK_STATUS_NONE;
+ }
/* receive packets that size > 2048 */
wr32m(hw, TXGBE_MACRXCFG,
@@ -3576,7 +3602,7 @@ txgbe_reset_misc(struct txgbe_hw *hw)
s32 txgbe_reset_hw(struct txgbe_hw *hw)
{
s32 status;
- u32 autoc;
+ u32 autoc = 0;
/* Call adapter stop to disable tx/rx and clear interrupts */
status = hw->mac.stop_hw(hw);
@@ -3638,16 +3664,28 @@ s32 txgbe_reset_hw(struct txgbe_hw *hw)
goto mac_reset_top;
}
- /*
- * Store the original AUTOC/AUTOC2 values if they have not been
- * stored off yet. Otherwise restore the stored original
- * values since the reset operation sets back to defaults.
- */
- if (!hw->mac.orig_link_settings_stored) {
- hw->mac.orig_autoc = hw->mac.autoc_read(hw);
- hw->mac.orig_link_settings_stored = true;
+ /* amlite TODO*/
+ if (hw->mac.type == txgbe_mac_aml || hw->mac.type == txgbe_mac_aml40) {
+ wr32(hw, TXGBE_LINKUP_FILTER, 30);
+ wr32m(hw, TXGBE_MAC_MISC_CTL, TXGBE_MAC_MISC_LINK_STS_MOD,
+ TXGBE_LINK_BOTH_PCS_MAC);
+ /* amlite: bme */
+ wr32(hw, TXGBE_PX_PF_BME, TXGBE_PX_PF_BME_EN);
+ /* amlite: rdm_rsc_ctl_free_ctl set to 1 */
+ wr32m(hw, TXGBE_RDM_RSC_CTL, TXGBE_RDM_RSC_CTL_FREE_CTL,
+ TXGBE_RDM_RSC_CTL_FREE_CTL);
} else {
- hw->mac.orig_autoc = autoc;
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ if (!hw->mac.orig_link_settings_stored) {
+ hw->mac.orig_autoc = hw->mac.autoc_read(hw);
+ hw->mac.orig_link_settings_stored = true;
+ } else {
+ hw->mac.orig_autoc = autoc;
+ }
}
if (hw->phy.ffe_set) {
diff --git a/drivers/net/txgbe/base/txgbe_regs.h b/drivers/net/txgbe/base/txgbe_regs.h
index 93cc222339..5b730bf749 100644
--- a/drivers/net/txgbe/base/txgbe_regs.h
+++ b/drivers/net/txgbe/base/txgbe_regs.h
@@ -1238,6 +1238,8 @@ enum txgbe_5tuple_protocol {
TXGBE_ICRMISC_LNKUP)
#define TXGBE_ICSMISC 0x000104
#define TXGBE_IENMISC 0x000108
+#define TXGBE_PX_PF_BME 0x0004B8
+#define TXGBE_PX_PF_BME_EN MS(0, 0x1)
#define TXGBE_IVARMISC 0x0004FC
#define TXGBE_IVARMISC_VEC(v) LS(v, 0, 0x7)
#define TXGBE_IVARMISC_VLD MS(7, 0x1)
--
2.21.0.windows.1
next prev parent reply other threads:[~2025-09-30 10:01 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-18 9:41 [PATCH 0/2] *** Wangxun new NIC support *** Zaiyu Wang
2025-04-18 9:41 ` [PATCH 1/2] net/txgbe: add support for Wangxun new NIC Amber-Lite 25g/40g Zaiyu Wang
2025-04-18 9:41 ` [PATCH 2/2] net/txgbe: add basic code for Amber-Liter NIC configuration Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 00/15] Wangxun new NIC support Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 01/15] net/txgbe: add basic information for Amber-Lite 25G/40G NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 02/15] net/txgbe: add new SW-FW mailbox interface Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 03/15] net/txgbe: add identification support for new SFP/QSFP modules Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 04/15] net/txgbe: add basic link configuration for Amber-Lite NICs Zaiyu Wang
2025-08-04 6:34 ` Jiawen Wu
2025-06-25 12:50 ` [PATCH v2 05/15] net/txgbe: add support for PHY configuration via SW-FW mailbox Zaiyu Wang
2025-08-04 6:51 ` Jiawen Wu
2025-06-25 12:50 ` [PATCH v2 06/15] net/txgbe: add RX&TX support for Amber-Lite NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 07/15] net/txgbe: add hardware reset change " Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 08/15] net/txgbe: add MAC reconfiguration to avoid packet loss Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 09/15] net/txgbe: add TX head Write-Back mode for Amber-Lite NICs Zaiyu Wang
2025-08-04 7:15 ` Jiawen Wu
2025-06-25 12:50 ` [PATCH v2 10/15] net/txgbe: add RX desc merge " Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 11/15] net/txgbe: add FEC support for Amber-Lite 25G NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 12/15] net/txgbe: add GPIO configuration Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 13/15] net/txgbe: disable unstable features Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 14/15] net/txgbe: add other hardware-related changes Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 15/15] doc: update for txgbe Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 00/15] Wangxun new NIC support Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 01/15] net/txgbe: add basic information for Amber-Lite 25G/40G NICs Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 02/15] net/txgbe: add new SW-FW mailbox interface Zaiyu Wang
2025-08-04 6:12 ` Jiawen Wu
2025-06-26 8:02 ` [PATCH v3 03/15] net/txgbe: add identification support for new SFP/QSFP modules Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 04/15] net/txgbe: add basic link configuration for Amber-Lite NICs Zaiyu Wang
2025-08-03 16:42 ` Stephen Hemminger
2025-06-26 8:02 ` [PATCH v3 05/15] net/txgbe: add support for PHY configuration via SW-FW mailbox Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 06/15] net/txgbe: add RX&TX support for Amber-Lite NICs Zaiyu Wang
2025-08-04 7:07 ` Jiawen Wu
2025-06-26 8:02 ` [PATCH v3 07/15] net/txgbe: add hardware reset change " Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 08/15] net/txgbe: add MAC reconfiguration to avoid packet loss Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 09/15] net/txgbe: add TX head Write-Back mode for Amber-Lite NICs Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 10/15] net/txgbe: add RX desc merge " Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 11/15] net/txgbe: add FEC support for Amber-Lite 25G NICs Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 12/15] net/txgbe: add GPIO configuration Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 13/15] net/txgbe: disable unstable features Zaiyu Wang
2025-06-26 8:02 ` [PATCH v3 14/15] net/txgbe: add other hardware-related changes Zaiyu Wang
2025-08-04 7:23 ` Jiawen Wu
2025-06-26 8:02 ` [PATCH v3 15/15] doc: update for txgbe Zaiyu Wang
2025-06-30 19:40 ` [PATCH v3 00/15] Wangxun new NIC support Stephen Hemminger
2025-09-30 9:59 ` [PATCH v4 00/20] " Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 01/20] net/txgbe: add basic information for Amber-Lite 25G/40G NICs Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 02/20] net/txgbe: add new SW-FW mailbox interface Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 03/20] net/txgbe: add identification support for new SFP/QSFP modules Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 04/20] net/txgbe: rename raptor to sp for Sapphire-specific code Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 05/20] net/txgbe: add basic link configuration for Amber-Lite NICs Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 06/20] net/txgbe: add support for PHY configuration via SW-FW mailbox Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 07/20] net/txgbe: add RX&TX support for Amber-Lite NICs Zaiyu Wang
2025-09-30 9:59 ` Zaiyu Wang [this message]
2025-09-30 9:59 ` [PATCH v4 09/20] net/txgbe: add MAC reconfiguration to avoid packet loss Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 10/20] net/txgbe: add TX head Write-Back mode for Amber-Lite NICs Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 11/20] net/txgbe: add RX desc merge " Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 12/20] net/txgbe: add FEC support for Amber-Lite 25G NICs Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 13/20] net/txgbe: add GPIO configuration Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 14/20] net/txgbe: disable unstable features Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 15/20] net/txgbe: add support for TX laser enable/disable Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 16/20] net/txgbe: add support for TX queue rate limiting Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 17/20] net/txgbe: add support for getting PHY ID Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 18/20] net/txgbe: add thermal sensor configuration for Amber-Lite NICs Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 19/20] net/txgbe: add RSS " Zaiyu Wang
2025-09-30 9:59 ` [PATCH v4 20/20] doc: update for txgbe Zaiyu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250930095953.18508-9-zaiyuwang@trustnetic.com \
--to=zaiyuwang@trustnetic.com \
--cc=dev@dpdk.org \
--cc=jianwang@trustnetic.com \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).