From: Serhii Iliushyk <sil-plv@napatech.com>
To: dev@dpdk.org
Cc: mko-plv@napatech.com, sil-plv@napatech.com, ckm@napatech.com,
stephen@networkplumber.org
Subject: [PATCH v1 05/20] net/ntnic: add reset init stage 2 for NT400D11
Date: Wed, 1 Oct 2025 17:09:47 +0200 [thread overview]
Message-ID: <20251001151018.250671-6-sil-plv@napatech.com> (raw)
In-Reply-To: <20251001151018.250671-1-sil-plv@napatech.com>
add DDR4 calibration complete.
Signed-off-by: Serhii Iliushyk <sil-plv@napatech.com>
---
.../core/nt400dxx/reset/nthw_fpga_rst9569.c | 64 +++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/net/ntnic/nthw/core/nt400dxx/reset/nthw_fpga_rst9569.c b/drivers/net/ntnic/nthw/core/nt400dxx/reset/nthw_fpga_rst9569.c
index 4205e539b9..5e127ecc86 100644
--- a/drivers/net/ntnic/nthw/core/nt400dxx/reset/nthw_fpga_rst9569.c
+++ b/drivers/net/ntnic/nthw/core/nt400dxx/reset/nthw_fpga_rst9569.c
@@ -79,6 +79,54 @@ static void nthw_fpga_rst9569_ddr4_rst(struct nthw_fpga_rst_nt400dxx *const p, u
nthw_field_set_val_flush32(p->p_fld_rst_ddr4, val);
}
+static bool nthw_fpga_rst9569_get_ddr4_calib_complete_stat(struct nthw_fpga_rst_nt400dxx *const p)
+{
+ return nthw_field_get_updated(p->p_fld_stat_ddr4_calib_complete) != 0;
+}
+
+static int nthw_fpga_rst9569_wait_ddr4_calibration_complete(struct fpga_info_s *p_fpga_info,
+ struct nthw_fpga_rst_nt400dxx *p_rst)
+{
+ const char *const p_adapter_id_str = p_fpga_info->mp_adapter_id_str;
+ uint32_t complete;
+ uint32_t retrycount;
+ uint32_t timeout;
+
+ /* 3: wait until DDR4 CALIB COMPLETE */
+ NT_LOG_DBGX(DBG, NTHW, "%s: DDR4 CALIB COMPLETE wait complete", p_adapter_id_str);
+ /*
+ * The following retry count gives a total timeout of 1 * 5 + 5 * 8 = 45sec
+ * It has been observed that at least 21sec can be necessary
+ */
+ retrycount = 1;
+ timeout = 50000;/* initial timeout must be set to 5 sec. */
+
+ do {
+ complete = nthw_fpga_rst9569_get_ddr4_calib_complete_stat(p_rst);
+
+ if (!complete)
+ nthw_os_wait_usec(100);
+
+ timeout--;
+
+ if (timeout == 0) {
+ if (retrycount == 0) {
+ NT_LOG(ERR, NTHW,
+ "%s: %s: Timeout waiting for DDR4 CALIB COMPLETE to be complete",
+ p_adapter_id_str, __func__);
+ return -1;
+ }
+
+ nthw_fpga_rst9569_ddr4_rst(p_rst, 1); /* Reset DDR4 */
+ nthw_fpga_rst9569_ddr4_rst(p_rst, 0);
+ retrycount--;
+ timeout = 90000;/* Increase timeout for second attempt to 8 sec. */
+ }
+ } while (!complete);
+
+ return 0;
+}
+
static int nthw_fpga_rst9569_product_reset(struct fpga_info_s *p_fpga_info,
struct nthw_fpga_rst_nt400dxx *p_rst)
{
@@ -100,6 +148,22 @@ static int nthw_fpga_rst9569_product_reset(struct fpga_info_s *p_fpga_info,
NT_LOG_DBGX(DBG, NTHW, "%s: De-asserting DDR4 reset", p_adapter_id_str);
nthw_fpga_rst9569_ddr4_rst(p_rst, 0);
+ /*
+ * Wait a while before waiting for calibration complete, since calibration complete
+ * is true while ddr4 is in reset
+ */
+ nthw_os_wait_usec(2000);
+
+ /* (2) Wait until DDR4 calibration complete */
+ NT_LOG_DBGX(DBG, NTHW, "%s: DDR4 calibration", p_adapter_id_str);
+ int res = nthw_fpga_rst9569_wait_ddr4_calibration_complete(p_fpga_info, p_rst);
+
+ if (res) {
+ NT_LOG(ERR, NTHW, "%s: DDR4 calibration failed", p_adapter_id_str);
+ return res;
+ }
+
+
return 0;
}
--
2.45.0
next prev parent reply other threads:[~2025-10-01 15:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-01 15:09 [PATCH v1 00/20] Add NT400D11 support and new features Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 01/20] net/ntnic: add stubs for init NT400D11 Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 02/20] net/ntnic: add reset setup for NT400D11 Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 03/20] net/ntnic: add reset init stage 0 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 04/20] net/ntnic: add reset init stage 1 " Serhii Iliushyk
2025-10-01 15:09 ` Serhii Iliushyk [this message]
2025-10-01 15:09 ` [PATCH v1 06/20] net/ntnic: add reset init stage 3 and 4 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 07/20] net/ntnic: add reset init stage 5 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 08/20] net/ntnic: add reset init stage 6 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 09/20] net/ntnic: add reset init stage 7 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 10/20] net/ntnic: add reset init stage 8 " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 11/20] net/ntnic: add fpga registers " Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 12/20] net/ntnic: add support pattern matching on inner ETH headers Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 13/20] net/ntnic: add support pattern matching on inner VLAN header Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 14/20] net/ntnic: add handling exception path option Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 15/20] net/ntnic: add flow query with count action Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 16/20] net/ntnic: add flow pull Serhii Iliushyk
2025-10-01 15:09 ` [PATCH v1 17/20] net/ntnic: extend flow dump with MBR configuration Serhii Iliushyk
2025-10-01 15:10 ` [PATCH v1 18/20] net/ntnic: make flow lock local Serhii Iliushyk
2025-10-01 15:10 ` [PATCH v1 19/20] net/ntnic: rename hwlock Serhii Iliushyk
2025-10-01 15:10 ` [PATCH v1 20/20] net/ntnic: rename nt log types Serhii Iliushyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251001151018.250671-6-sil-plv@napatech.com \
--to=sil-plv@napatech.com \
--cc=ckm@napatech.com \
--cc=dev@dpdk.org \
--cc=mko-plv@napatech.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).