[PATCH] test: add a test for null PMD

[PATCH] test: add a test for null PMD

[Stephen Hemminger]

Add a test for null PMD.
This test was generated with Claude AI based off of existing
test_pmd_ring.c with some cleanup afterwards.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test/meson.build     |   1 +
 app/test/test_pmd_null.c | 827 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 828 insertions(+)
 create mode 100644 app/test/test_pmd_null.c

diff --git a/app/test/meson.build b/app/test/meson.build
index efec42a6bf..967e20d187 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -141,6 +141,7 @@ source_file_deps = {
     'test_per_lcore.c': [],
     'test_pflock.c': [],
     'test_pie.c': ['sched'],
+    'test_pmd_null.c': ['ethdev', 'net'],
     'test_pmd_perf.c': ['ethdev', 'net'] + packet_burst_generator_deps,
     'test_pmd_ring.c': ['net_ring', 'ethdev', 'bus_vdev'],
     'test_pmd_ring_perf.c': ['ethdev', 'net_ring', 'bus_vdev'],
diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
new file mode 100644
index 0000000000..ebc2447c6d
--- /dev/null
+++ b/app/test/test_pmd_null.c
@@ -0,0 +1,827 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2026 Stephen Hemminger
+ */
+
+#include <inttypes.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <rte_bus_vdev.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_ether.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+
+#include "test.h"
+
+#define NUM_MBUFS 256
+#define MBUF_CACHE_SIZE 32
+#define BURST_SIZE 32
+#define RING_SIZE 512
+
+/* Test device names */
+#define NULL_DEV_NAME "net_null_test"
+
+static struct rte_mempool *mp;
+static uint16_t port_id = RTE_MAX_ETHPORTS;
+static bool port_created;
+static bool port_started;
+
+static int
+create_null_port(const char *name, const char *args, uint16_t *out_port_id)
+{
+	int ret;
+
+	ret = rte_vdev_init(name, args);
+	if (ret != 0) {
+		printf("Failed to create null device '%s': %d\n", name, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_get_port_by_name(name, out_port_id);
+	if (ret != 0) {
+		printf("Failed to get port id for '%s': %d\n", name, ret);
+		rte_vdev_uninit(name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+configure_null_port(uint16_t pid)
+{
+	struct rte_eth_conf port_conf = {0};
+	struct rte_eth_dev_info dev_info;
+	int ret;
+
+	ret = rte_eth_dev_info_get(pid, &dev_info);
+	if (ret != 0) {
+		printf("Failed to get device info for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_configure(pid, 1, 1, &port_conf);
+	if (ret != 0) {
+		printf("Failed to configure port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_rx_queue_setup(pid, 0, RING_SIZE,
+				     rte_eth_dev_socket_id(pid),
+				     NULL, mp);
+	if (ret != 0) {
+		printf("Failed to setup RX queue for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_tx_queue_setup(pid, 0, RING_SIZE,
+				     rte_eth_dev_socket_id(pid),
+				     NULL);
+	if (ret != 0) {
+		printf("Failed to setup TX queue for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_start(pid);
+	if (ret != 0) {
+		printf("Failed to start port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+test_null_setup(void)
+{
+	int ret;
+
+	/* Create mempool for mbufs */
+	mp = rte_pktmbuf_pool_create("null_test_pool", NUM_MBUFS,
+				     MBUF_CACHE_SIZE, 0,
+				     RTE_MBUF_DEFAULT_BUF_SIZE,
+				     rte_socket_id());
+	if (mp == NULL) {
+		printf("Failed to create mempool\n");
+		return -1;
+	}
+
+	/* Create and configure null port */
+	ret = create_null_port(NULL_DEV_NAME, NULL, &port_id);
+	if (ret != 0) {
+		printf("Failed to create null port\n");
+		return -1;
+	}
+	port_created = true;
+
+	ret = configure_null_port(port_id);
+	if (ret != 0) {
+		printf("Failed to configure null port\n");
+		return -1;
+	}
+	port_started = true;
+
+	return 0;
+}
+
+static void
+test_null_teardown(void)
+{
+	/* Stop and close test port */
+	if (port_started) {
+		rte_eth_dev_stop(port_id);
+		port_started = false;
+	}
+
+	if (port_created) {
+		rte_eth_dev_close(port_id);
+		rte_vdev_uninit(NULL_DEV_NAME);
+		port_id = RTE_MAX_ETHPORTS;
+		port_created = false;
+	}
+
+	if (mp != NULL) {
+		rte_mempool_free(mp);
+		mp = NULL;
+	}
+}
+
+/*
+ * Test: Basic RX - should return empty packets
+ */
+static int
+test_null_rx_basic(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_rx;
+	unsigned int i;
+
+	/* RX should return requested number of empty packets */
+	nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE,
+		    "Expected %u packets, got %u", BURST_SIZE, nb_rx);
+
+	/* Verify packets have expected properties */
+	for (i = 0; i < nb_rx; i++) {
+		TEST_ASSERT(bufs[i] != NULL, "Received NULL mbuf");
+		TEST_ASSERT(bufs[i]->port == port_id,
+			    "Unexpected port id in mbuf: %u", bufs[i]->port);
+		/* Default packet size is 64 bytes */
+		TEST_ASSERT(bufs[i]->pkt_len == 64,
+			    "Unexpected pkt_len: %u", bufs[i]->pkt_len);
+		TEST_ASSERT(bufs[i]->data_len == 64,
+			    "Unexpected data_len: %u", bufs[i]->data_len);
+	}
+
+	/* Free received mbufs */
+	for (i = 0; i < nb_rx; i++)
+		rte_pktmbuf_free(bufs[i]);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Basic TX - should free all packets
+ */
+static int
+test_null_tx_basic(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_tx;
+	unsigned int i;
+	unsigned int pool_count_before, pool_count_after;
+
+	/* Allocate mbufs for TX */
+	for (i = 0; i < BURST_SIZE; i++) {
+		bufs[i] = rte_pktmbuf_alloc(mp);
+		TEST_ASSERT(bufs[i] != NULL, "Failed to allocate mbuf");
+		bufs[i]->data_len = 64;
+		bufs[i]->pkt_len = 64;
+	}
+
+	pool_count_before = rte_mempool_avail_count(mp);
+
+	/* TX should accept and free all packets */
+	nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE,
+		    "Expected to TX %u packets, but sent %u", BURST_SIZE, nb_tx);
+
+	/* Give some time for async operations (if any) */
+	rte_delay_us_block(100);
+
+	pool_count_after = rte_mempool_avail_count(mp);
+
+	/* Verify mbufs were freed - pool should have same count */
+	TEST_ASSERT(pool_count_after >= pool_count_before,
+		    "Mbufs not freed: before=%u, after=%u",
+		    pool_count_before, pool_count_after);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Statistics verification
+ */
+static int
+test_null_stats(void)
+{
+	struct rte_eth_stats stats;
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	struct rte_mbuf *tx_bufs[BURST_SIZE];
+	uint16_t nb_rx, nb_tx;
+	unsigned int i;
+	int ret;
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Get initial stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+	TEST_ASSERT(stats.ipackets == 0, "Initial ipackets not zero");
+	TEST_ASSERT(stats.opackets == 0, "Initial opackets not zero");
+
+	/* Perform RX */
+	nb_rx = rte_eth_rx_burst(port_id, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+	/* Allocate and perform TX */
+	for (i = 0; i < BURST_SIZE; i++) {
+		tx_bufs[i] = rte_pktmbuf_alloc(mp);
+		TEST_ASSERT(tx_bufs[i] != NULL, "Failed to allocate mbuf");
+		tx_bufs[i]->data_len = 64;
+		tx_bufs[i]->pkt_len = 64;
+	}
+	nb_tx = rte_eth_tx_burst(port_id, 0, tx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst failed");
+
+	/* Get updated stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats after RX/TX");
+
+	/* Verify stats */
+	TEST_ASSERT(stats.ipackets == BURST_SIZE,
+		    "Expected ipackets=%u, got %"PRIu64,
+		    BURST_SIZE, stats.ipackets);
+	TEST_ASSERT(stats.opackets == BURST_SIZE,
+		    "Expected opackets=%u, got %"PRIu64,
+		    BURST_SIZE, stats.opackets);
+	/* Default packet size is 64 bytes */
+	TEST_ASSERT(stats.ibytes == BURST_SIZE * 64,
+		    "Expected ibytes=%u, got %"PRIu64,
+		    BURST_SIZE * 64, stats.ibytes);
+	TEST_ASSERT(stats.obytes == BURST_SIZE * 64,
+		    "Expected obytes=%u, got %"PRIu64,
+		    BURST_SIZE * 64, stats.obytes);
+
+	/* Free RX mbufs */
+	for (i = 0; i < nb_rx; i++)
+		rte_pktmbuf_free(rx_bufs[i]);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Custom packet size
+ */
+static int
+test_null_custom_size(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t custom_port;
+	uint16_t nb_rx;
+	unsigned int i;
+	const unsigned int custom_size = 256;
+	int ret;
+
+	/* Create null device with custom size */
+	ret = create_null_port("net_null_size_test", "size=256", &custom_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with custom size");
+
+	ret = configure_null_port(custom_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX should return packets with custom size */
+	nb_rx = rte_eth_rx_burst(custom_port, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+	/* Verify custom packet size */
+	for (i = 0; i < nb_rx; i++) {
+		TEST_ASSERT(bufs[i]->pkt_len == custom_size,
+			    "Expected pkt_len=%u, got %u",
+			    custom_size, bufs[i]->pkt_len);
+		TEST_ASSERT(bufs[i]->data_len == custom_size,
+			    "Expected data_len=%u, got %u",
+			    custom_size, bufs[i]->data_len);
+		rte_pktmbuf_free(bufs[i]);
+	}
+
+	/* Cleanup custom port */
+	rte_eth_dev_stop(custom_port);
+	rte_eth_dev_close(custom_port);
+	rte_vdev_uninit("net_null_size_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Copy mode
+ */
+static int
+test_null_copy_mode(void)
+{
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	uint16_t copy_port;
+	uint16_t nb_rx;
+	unsigned int i;
+	int ret;
+
+	/* Create null device with copy enabled */
+	ret = create_null_port("net_null_copy_test", "copy=1", &copy_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with copy mode");
+
+	ret = configure_null_port(copy_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX in copy mode should work */
+	nb_rx = rte_eth_rx_burst(copy_port, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst in copy mode failed");
+
+	/* Free RX mbufs */
+	for (i = 0; i < nb_rx; i++)
+		rte_pktmbuf_free(rx_bufs[i]);
+
+	/* Cleanup */
+	rte_eth_dev_stop(copy_port);
+	rte_eth_dev_close(copy_port);
+	rte_vdev_uninit("net_null_copy_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: No-RX mode
+ */
+static int
+test_null_no_rx_mode(void)
+{
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	struct rte_mbuf *tx_bufs[BURST_SIZE];
+	uint16_t norx_port;
+	uint16_t nb_rx, nb_tx;
+	unsigned int i;
+	int ret;
+
+	/* Create null device with no-rx enabled */
+	ret = create_null_port("net_null_norx_test", "no-rx=1", &norx_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with no-rx mode");
+
+	ret = configure_null_port(norx_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX in no-rx mode should return 0 packets */
+	nb_rx = rte_eth_rx_burst(norx_port, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == 0,
+		    "Expected 0 packets in no-rx mode, got %u", nb_rx);
+
+	/* TX in no-rx mode should still work (frees packets) */
+	for (i = 0; i < BURST_SIZE; i++) {
+		tx_bufs[i] = rte_pktmbuf_alloc(mp);
+		TEST_ASSERT(tx_bufs[i] != NULL, "Failed to allocate mbuf");
+		tx_bufs[i]->data_len = 64;
+		tx_bufs[i]->pkt_len = 64;
+	}
+
+	nb_tx = rte_eth_tx_burst(norx_port, 0, tx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst in no-rx mode failed");
+
+	/* Cleanup */
+	rte_eth_dev_stop(norx_port);
+	rte_eth_dev_close(norx_port);
+	rte_vdev_uninit("net_null_norx_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Link status
+ */
+static int
+test_null_link_status(void)
+{
+	struct rte_eth_link link;
+	int ret;
+
+	ret = rte_eth_link_get_nowait(port_id, &link);
+	TEST_ASSERT(ret == 0, "Failed to get link status");
+
+	/* After start, link should be UP */
+	TEST_ASSERT(link.link_status == RTE_ETH_LINK_UP,
+		    "Expected link UP after start");
+	TEST_ASSERT(link.link_speed == RTE_ETH_SPEED_NUM_10G,
+		    "Expected 10G link speed");
+	TEST_ASSERT(link.link_duplex == RTE_ETH_LINK_FULL_DUPLEX,
+		    "Expected full duplex");
+
+	/* Stop the device */
+	ret = rte_eth_dev_stop(port_id);
+	TEST_ASSERT(ret == 0, "Failed to stop device");
+
+	ret = rte_eth_link_get_nowait(port_id, &link);
+	TEST_ASSERT(ret == 0, "Failed to get link status after stop");
+
+	/* After stop, link should be DOWN */
+	TEST_ASSERT(link.link_status == RTE_ETH_LINK_DOWN,
+		    "Expected link DOWN after stop");
+
+	/* Restart for subsequent tests */
+	ret = rte_eth_dev_start(port_id);
+	TEST_ASSERT(ret == 0, "Failed to restart device");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Device info
+ */
+static int
+test_null_dev_info(void)
+{
+	struct rte_eth_dev_info dev_info;
+	int ret;
+
+	ret = rte_eth_dev_info_get(port_id, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	/* Verify expected device info values */
+	TEST_ASSERT(dev_info.max_mac_addrs == 1,
+		    "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
+	TEST_ASSERT(dev_info.max_rx_pktlen == (uint32_t)-1,
+		    "Unexpected max_rx_pktlen");
+	TEST_ASSERT(dev_info.min_rx_bufsize == 0,
+		    "Expected min_rx_bufsize=0, got %u", dev_info.min_rx_bufsize);
+
+	/* Check TX offload capabilities */
+	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
+		    "Expected MULTI_SEGS TX offload capability");
+	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MT_LOCKFREE,
+		    "Expected MT_LOCKFREE TX offload capability");
+
+	/* Check RSS capabilities */
+	TEST_ASSERT(dev_info.reta_size > 0, "Expected non-zero reta_size");
+	TEST_ASSERT(dev_info.hash_key_size == 40,
+		    "Expected hash_key_size=40, got %u", dev_info.hash_key_size);
+	TEST_ASSERT(dev_info.flow_type_rss_offloads != 0,
+		    "Expected RSS offloads to be set");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Multiple RX/TX bursts
+ */
+static int
+test_null_multiple_bursts(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	struct rte_eth_stats stats;
+	uint16_t nb_rx, nb_tx;
+	unsigned int i, burst;
+	const unsigned int num_bursts = 10;
+	int ret;
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Perform multiple RX bursts */
+	for (burst = 0; burst < num_bursts; burst++) {
+		nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+		TEST_ASSERT(nb_rx == BURST_SIZE,
+			    "Burst %u: Expected %u packets, got %u",
+			    burst, BURST_SIZE, nb_rx);
+
+		for (i = 0; i < nb_rx; i++)
+			rte_pktmbuf_free(bufs[i]);
+	}
+
+	/* Perform multiple TX bursts */
+	for (burst = 0; burst < num_bursts; burst++) {
+		for (i = 0; i < BURST_SIZE; i++) {
+			bufs[i] = rte_pktmbuf_alloc(mp);
+			TEST_ASSERT(bufs[i] != NULL, "Failed to allocate mbuf");
+			bufs[i]->data_len = 64;
+			bufs[i]->pkt_len = 64;
+		}
+
+		nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+		TEST_ASSERT(nb_tx == BURST_SIZE,
+			    "Burst %u: Expected to TX %u, sent %u",
+			    burst, BURST_SIZE, nb_tx);
+	}
+
+	/* Verify total stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+
+	TEST_ASSERT(stats.ipackets == num_bursts * BURST_SIZE,
+		    "Expected ipackets=%u, got %"PRIu64,
+		    num_bursts * BURST_SIZE, stats.ipackets);
+	TEST_ASSERT(stats.opackets == num_bursts * BURST_SIZE,
+		    "Expected opackets=%u, got %"PRIu64,
+		    num_bursts * BURST_SIZE, stats.opackets);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: RSS configuration
+ * Note: RSS requires multi-queue configuration
+ */
+static int
+test_null_rss_config(void)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_rss_conf rss_conf;
+	struct rte_eth_conf port_conf = {0};
+	uint8_t rss_key[40];
+	uint16_t rss_port;
+	const uint16_t num_queues = 2;
+	uint16_t q;
+	int ret;
+
+	/* Create a new null device for RSS testing with multiple queues */
+	ret = create_null_port("net_null_rss_test", NULL, &rss_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port for RSS test");
+
+	ret = rte_eth_dev_info_get(rss_port, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	/* Configure with RSS enabled and multiple queues */
+	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_configure(rss_port, num_queues, num_queues, &port_conf);
+	TEST_ASSERT(ret == 0, "Failed to configure RSS port");
+
+	for (q = 0; q < num_queues; q++) {
+		ret = rte_eth_rx_queue_setup(rss_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(rss_port),
+					     NULL, mp);
+		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+		ret = rte_eth_tx_queue_setup(rss_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(rss_port),
+					     NULL);
+		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+	}
+
+	ret = rte_eth_dev_start(rss_port);
+	TEST_ASSERT(ret == 0, "Failed to start RSS port");
+
+	/* Get current RSS config */
+	memset(&rss_conf, 0, sizeof(rss_conf));
+	rss_conf.rss_key = rss_key;
+	rss_conf.rss_key_len = sizeof(rss_key);
+
+	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to get RSS hash config");
+
+	/* Update RSS config with new key */
+	memset(rss_key, 0x55, sizeof(rss_key));
+	rss_conf.rss_key = rss_key;
+	rss_conf.rss_key_len = sizeof(rss_key);
+	rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_rss_hash_update(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to update RSS hash config");
+
+	/* Verify the update */
+	memset(rss_key, 0, sizeof(rss_key));
+	rss_conf.rss_key = rss_key;
+
+	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to get RSS hash config after update");
+
+	/* Verify key was updated */
+	for (unsigned int i = 0; i < sizeof(rss_key); i++) {
+		TEST_ASSERT(rss_key[i] == 0x55,
+			    "RSS key not updated at byte %u", i);
+	}
+
+	/* Cleanup */
+	rte_eth_dev_stop(rss_port);
+	rte_eth_dev_close(rss_port);
+	rte_vdev_uninit("net_null_rss_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: RETA (Redirection Table) configuration
+ * Note: RETA requires multi-queue RSS configuration
+ */
+static int
+test_null_reta_config(void)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_rss_reta_entry64 reta_conf[RTE_ETH_RSS_RETA_SIZE_128 /
+						 RTE_ETH_RETA_GROUP_SIZE];
+	struct rte_eth_conf port_conf = {0};
+	uint16_t reta_port;
+	const uint16_t num_queues = 2;
+	unsigned int i, j;
+	uint16_t q;
+	int ret;
+
+	/* Create a new null device for RETA testing with multiple queues */
+	ret = create_null_port("net_null_reta_test", NULL, &reta_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port for RETA test");
+
+	ret = rte_eth_dev_info_get(reta_port, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	TEST_ASSERT(dev_info.reta_size > 0, "RETA size is zero");
+
+	/* Configure with RSS enabled and multiple queues */
+	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_configure(reta_port, num_queues, num_queues, &port_conf);
+	TEST_ASSERT(ret == 0, "Failed to configure RETA port");
+
+	for (q = 0; q < num_queues; q++) {
+		ret = rte_eth_rx_queue_setup(reta_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(reta_port),
+					     NULL, mp);
+		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+		ret = rte_eth_tx_queue_setup(reta_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(reta_port),
+					     NULL);
+		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+	}
+
+	ret = rte_eth_dev_start(reta_port);
+	TEST_ASSERT(ret == 0, "Failed to start RETA port");
+
+	/* Initialize RETA config */
+	memset(reta_conf, 0, sizeof(reta_conf));
+	for (i = 0; i < dev_info.reta_size / RTE_ETH_RETA_GROUP_SIZE; i++) {
+		reta_conf[i].mask = UINT64_MAX;
+		for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++)
+			reta_conf[i].reta[j] = j % num_queues;
+	}
+
+	/* Update RETA */
+	ret = rte_eth_dev_rss_reta_update(reta_port, reta_conf, dev_info.reta_size);
+	TEST_ASSERT(ret == 0, "Failed to update RETA");
+
+	/* Query RETA */
+	memset(reta_conf, 0, sizeof(reta_conf));
+	for (i = 0; i < dev_info.reta_size / RTE_ETH_RETA_GROUP_SIZE; i++)
+		reta_conf[i].mask = UINT64_MAX;
+
+	ret = rte_eth_dev_rss_reta_query(reta_port, reta_conf, dev_info.reta_size);
+	TEST_ASSERT(ret == 0, "Failed to query RETA");
+
+	/* Verify RETA values */
+	for (i = 0; i < dev_info.reta_size / RTE_ETH_RETA_GROUP_SIZE; i++) {
+		for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++) {
+			TEST_ASSERT(reta_conf[i].reta[j] == j % num_queues,
+				    "RETA mismatch at [%u][%u]", i, j);
+		}
+	}
+
+	/* Cleanup */
+	rte_eth_dev_stop(reta_port);
+	rte_eth_dev_close(reta_port);
+	rte_vdev_uninit("net_null_reta_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Stats reset
+ */
+static int
+test_null_stats_reset(void)
+{
+	struct rte_eth_stats stats;
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_rx;
+	unsigned int i;
+	int ret;
+
+	/* Generate some traffic */
+	nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx > 0, "Failed to receive packets");
+	for (i = 0; i < nb_rx; i++)
+		rte_pktmbuf_free(bufs[i]);
+
+	/* Verify stats are non-zero */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+	TEST_ASSERT(stats.ipackets > 0, "Expected non-zero ipackets");
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Verify stats are zero */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats after reset");
+	TEST_ASSERT(stats.ipackets == 0,
+		    "Expected ipackets=0 after reset, got %"PRIu64,
+		    stats.ipackets);
+	TEST_ASSERT(stats.opackets == 0,
+		    "Expected opackets=0 after reset, got %"PRIu64,
+		    stats.opackets);
+	TEST_ASSERT(stats.ibytes == 0,
+		    "Expected ibytes=0 after reset, got %"PRIu64,
+		    stats.ibytes);
+	TEST_ASSERT(stats.obytes == 0,
+		    "Expected obytes=0 after reset, got %"PRIu64,
+		    stats.obytes);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: MAC address operations
+ */
+static int
+test_null_mac_addr(void)
+{
+	struct rte_ether_addr mac_addr;
+	struct rte_ether_addr new_mac = {
+		.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
+	};
+	int ret;
+
+	/* Get current MAC address */
+	ret = rte_eth_macaddr_get(port_id, &mac_addr);
+	TEST_ASSERT(ret == 0, "Failed to get MAC address");
+
+	/* Set new MAC address */
+	ret = rte_eth_dev_default_mac_addr_set(port_id, &new_mac);
+	TEST_ASSERT(ret == 0, "Failed to set MAC address");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Promiscuous and allmulticast modes
+ */
+static int
+test_null_promisc_allmulti(void)
+{
+	int ret;
+
+	/* Test promiscuous mode - null PMD starts with promiscuous enabled */
+	ret = rte_eth_promiscuous_get(port_id);
+	TEST_ASSERT(ret == 1, "Expected promiscuous mode enabled");
+
+	/* Test allmulticast mode - null PMD starts with allmulti enabled */
+	ret = rte_eth_allmulticast_get(port_id);
+	TEST_ASSERT(ret == 1, "Expected allmulticast mode enabled");
+
+	return TEST_SUCCESS;
+}
+
+static struct unit_test_suite null_pmd_test_suite = {
+	.suite_name = "Null PMD Unit Test Suite",
+	.setup = test_null_setup,
+	.teardown = test_null_teardown,
+	.unit_test_cases = {
+		TEST_CASE(test_null_rx_basic),
+		TEST_CASE(test_null_tx_basic),
+		TEST_CASE(test_null_stats),
+		TEST_CASE(test_null_custom_size),
+		TEST_CASE(test_null_copy_mode),
+		TEST_CASE(test_null_no_rx_mode),
+		TEST_CASE(test_null_link_status),
+		TEST_CASE(test_null_dev_info),
+		TEST_CASE(test_null_multiple_bursts),
+		TEST_CASE(test_null_rss_config),
+		TEST_CASE(test_null_reta_config),
+		TEST_CASE(test_null_stats_reset),
+		TEST_CASE(test_null_mac_addr),
+		TEST_CASE(test_null_promisc_allmulti),
+
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
+static int
+test_pmd_null(void)
+{
+	return unit_test_suite_runner(&null_pmd_test_suite);
+}
+
+REGISTER_FAST_TEST(null_pmd_autotest, true, true, test_pmd_null);
-- 
2.51.0

RE: [PATCH] test: add a test for null PMD

[Marat Khalili]

Thank you for doing this. Having tests for things like this is important both 
to make sure they work and as a form of documentation.

In my humble opinion we should not approach this mechanically though, which is 
what AI tools tend to do. It is usually said that tests should test desired 
behavior, not specific implementation. Particularly in settings some of the 
values might not matter, or the whole range might be acceptable, in other cases 
current implementation might be questionable and by writing a test we just 
legitimize it.

Please more see comments inline.

> diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
> new file mode 100644
> index 0000000000..ebc2447c6d
> --- /dev/null
> +++ b/app/test/test_pmd_null.c
> @@ -0,0 +1,827 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2026 Stephen Hemminger
> + */
> +
> +#include <inttypes.h>
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <string.h>
> +
> +#include <rte_bus_vdev.h>
> +#include <rte_cycles.h>
> +#include <rte_ethdev.h>
> +#include <rte_ether.h>
> +#include <rte_lcore.h>
> +#include <rte_mbuf.h>
> +#include <rte_mempool.h>

I do not think it is a problem, but just curious: how does test_pmd_ring.c 
manage to use much fewer includes?

> +
> +#include "test.h"
> +
> +#define NUM_MBUFS 256
> +#define MBUF_CACHE_SIZE 32
> +#define BURST_SIZE 32
> +#define RING_SIZE 512
> +
> +/* Test device names */
> +#define NULL_DEV_NAME "net_null_test"
> +
> +static struct rte_mempool *mp;
> +static uint16_t port_id = RTE_MAX_ETHPORTS;
> +static bool port_created;
> +static bool port_started;

// snip setup and teardown functions, could find nothing to nitpick there

> +/*
> + * Test: Basic RX - should return empty packets
> + */
> +static int
> +test_null_rx_basic(void)
> +{
> +	struct rte_mbuf *bufs[BURST_SIZE];
> +	uint16_t nb_rx;
> +	unsigned int i;
> +
> +	/* RX should return requested number of empty packets */
> +	nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_rx == BURST_SIZE,
> +		    "Expected %u packets, got %u", BURST_SIZE, nb_rx);
> +
> +	/* Verify packets have expected properties */
> +	for (i = 0; i < nb_rx; i++) {
> +		TEST_ASSERT(bufs[i] != NULL, "Received NULL mbuf");
> +		TEST_ASSERT(bufs[i]->port == port_id,
> +			    "Unexpected port id in mbuf: %u", bufs[i]->port);
> +		/* Default packet size is 64 bytes */

Default packet size repeats a few times in this file, can we have a global
constant for it?

> +		TEST_ASSERT(bufs[i]->pkt_len == 64,
> +			    "Unexpected pkt_len: %u", bufs[i]->pkt_len);
> +		TEST_ASSERT(bufs[i]->data_len == 64,
> +			    "Unexpected data_len: %u", bufs[i]->data_len);
> +	}
> +
> +	/* Free received mbufs */
> +	for (i = 0; i < nb_rx; i++)
> +		rte_pktmbuf_free(bufs[i]);
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Basic TX - should free all packets
> + */
> +static int
> +test_null_tx_basic(void)
> +{
> +	struct rte_mbuf *bufs[BURST_SIZE];
> +	uint16_t nb_tx;
> +	unsigned int i;
> +	unsigned int pool_count_before, pool_count_after;
> +
> +	/* Allocate mbufs for TX */
> +	for (i = 0; i < BURST_SIZE; i++) {
> +		bufs[i] = rte_pktmbuf_alloc(mp);
> +		TEST_ASSERT(bufs[i] != NULL, "Failed to allocate mbuf");
> +		bufs[i]->data_len = 64;
> +		bufs[i]->pkt_len = 64;

It would help to test sending packets of various sizes, especially spanning 
multiple buffers or allocating them at the edge of buffer. May even uncover 
some bugs in the copy mode implementation ;)

> +	}
> +
> +	pool_count_before = rte_mempool_avail_count(mp);
> +
> +	/* TX should accept and free all packets */
> +	nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_tx == BURST_SIZE,
> +		    "Expected to TX %u packets, but sent %u", BURST_SIZE, nb_tx);
> +
> +	/* Give some time for async operations (if any) */
> +	rte_delay_us_block(100);
> +
> +	pool_count_after = rte_mempool_avail_count(mp);
> +
> +	/* Verify mbufs were freed - pool should have same count */
> +	TEST_ASSERT(pool_count_after >= pool_count_before,
> +		    "Mbufs not freed: before=%u, after=%u",
> +		    pool_count_before, pool_count_after);
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Statistics verification
> + */
> +static int
> +test_null_stats(void)
> +{
> +	struct rte_eth_stats stats;
> +	struct rte_mbuf *rx_bufs[BURST_SIZE];
> +	struct rte_mbuf *tx_bufs[BURST_SIZE];
> +	uint16_t nb_rx, nb_tx;
> +	unsigned int i;
> +	int ret;
> +
> +	/* Reset stats */
> +	ret = rte_eth_stats_reset(port_id);
> +	TEST_ASSERT(ret == 0, "Failed to reset stats");
> +
> +	/* Get initial stats */
> +	ret = rte_eth_stats_get(port_id, &stats);
> +	TEST_ASSERT(ret == 0, "Failed to get stats");
> +	TEST_ASSERT(stats.ipackets == 0, "Initial ipackets not zero");
> +	TEST_ASSERT(stats.opackets == 0, "Initial opackets not zero");
> +
> +	/* Perform RX */
> +	nb_rx = rte_eth_rx_burst(port_id, 0, rx_bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
> +
> +	/* Allocate and perform TX */
> +	for (i = 0; i < BURST_SIZE; i++) {
> +		tx_bufs[i] = rte_pktmbuf_alloc(mp);
> +		TEST_ASSERT(tx_bufs[i] != NULL, "Failed to allocate mbuf");
> +		tx_bufs[i]->data_len = 64;
> +		tx_bufs[i]->pkt_len = 64;

Here and elsewhere, it would be interesting to test something non-default.

> +	}
> +	nb_tx = rte_eth_tx_burst(port_id, 0, tx_bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst failed");
> +
> +	/* Get updated stats */
> +	ret = rte_eth_stats_get(port_id, &stats);
> +	TEST_ASSERT(ret == 0, "Failed to get stats after RX/TX");
> +
> +	/* Verify stats */
> +	TEST_ASSERT(stats.ipackets == BURST_SIZE,
> +		    "Expected ipackets=%u, got %"PRIu64,
> +		    BURST_SIZE, stats.ipackets);
> +	TEST_ASSERT(stats.opackets == BURST_SIZE,
> +		    "Expected opackets=%u, got %"PRIu64,
> +		    BURST_SIZE, stats.opackets);
> +	/* Default packet size is 64 bytes */
> +	TEST_ASSERT(stats.ibytes == BURST_SIZE * 64,
> +		    "Expected ibytes=%u, got %"PRIu64,
> +		    BURST_SIZE * 64, stats.ibytes);
> +	TEST_ASSERT(stats.obytes == BURST_SIZE * 64,
> +		    "Expected obytes=%u, got %"PRIu64,
> +		    BURST_SIZE * 64, stats.obytes);
> +
> +	/* Free RX mbufs */
> +	for (i = 0; i < nb_rx; i++)
> +		rte_pktmbuf_free(rx_bufs[i]);
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Custom packet size
> + */
> +static int
> +test_null_custom_size(void)
> +{
> +	struct rte_mbuf *bufs[BURST_SIZE];
> +	uint16_t custom_port;
> +	uint16_t nb_rx;
> +	unsigned int i;
> +	const unsigned int custom_size = 256;

What about bigger values, something exceeding RTE_MBUF_DEFAULT_BUF_SIZE? Will 
it be able to honour them or at least fail gracefully?

> +	int ret;
> +
> +	/* Create null device with custom size */
> +	ret = create_null_port("net_null_size_test", "size=256", &custom_port);
> +	TEST_ASSERT(ret == 0, "Failed to create null port with custom size");
> +
> +	ret = configure_null_port(custom_port);
> +	TEST_ASSERT(ret == 0, "Failed to configure null port");
> +
> +	/* RX should return packets with custom size */
> +	nb_rx = rte_eth_rx_burst(custom_port, 0, bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
> +
> +	/* Verify custom packet size */
> +	for (i = 0; i < nb_rx; i++) {
> +		TEST_ASSERT(bufs[i]->pkt_len == custom_size,
> +			    "Expected pkt_len=%u, got %u",
> +			    custom_size, bufs[i]->pkt_len);
> +		TEST_ASSERT(bufs[i]->data_len == custom_size,
> +			    "Expected data_len=%u, got %u",
> +			    custom_size, bufs[i]->data_len);
> +		rte_pktmbuf_free(bufs[i]);
> +	}
> +
> +	/* Cleanup custom port */
> +	rte_eth_dev_stop(custom_port);
> +	rte_eth_dev_close(custom_port);
> +	rte_vdev_uninit("net_null_size_test");
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Copy mode
> + */
> +static int
> +test_null_copy_mode(void)
> +{
> +	struct rte_mbuf *rx_bufs[BURST_SIZE];
> +	uint16_t copy_port;
> +	uint16_t nb_rx;
> +	unsigned int i;
> +	int ret;
> +
> +	/* Create null device with copy enabled */
> +	ret = create_null_port("net_null_copy_test", "copy=1", &copy_port);
> +	TEST_ASSERT(ret == 0, "Failed to create null port with copy mode");
> +
> +	ret = configure_null_port(copy_port);
> +	TEST_ASSERT(ret == 0, "Failed to configure null port");
> +
> +	/* RX in copy mode should work */
> +	nb_rx = rte_eth_rx_burst(copy_port, 0, rx_bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst in copy mode failed");
> +
> +	/* Free RX mbufs */
> +	for (i = 0; i < nb_rx; i++)
> +		rte_pktmbuf_free(rx_bufs[i]);
> +
> +	/* Cleanup */
> +	rte_eth_dev_stop(copy_port);
> +	rte_eth_dev_close(copy_port);
> +	rte_vdev_uninit("net_null_copy_test");
> +
> +	return TEST_SUCCESS;
> +}

As far as I understand, copy mode should not be different for the end user 
(apart from performance and bugs). The test for it is not as comprehensive as 
for the default mode. Can we save some LOCs and improve coverage by just 
running full tests twice, with a boolean parameter for the copy mode?

> +
> +/*
> + * Test: No-RX mode
> + */
> +static int
> +test_null_no_rx_mode(void)
> +{
> +	struct rte_mbuf *rx_bufs[BURST_SIZE];
> +	struct rte_mbuf *tx_bufs[BURST_SIZE];
> +	uint16_t norx_port;
> +	uint16_t nb_rx, nb_tx;
> +	unsigned int i;
> +	int ret;
> +
> +	/* Create null device with no-rx enabled */
> +	ret = create_null_port("net_null_norx_test", "no-rx=1", &norx_port);
> +	TEST_ASSERT(ret == 0, "Failed to create null port with no-rx mode");
> +
> +	ret = configure_null_port(norx_port);
> +	TEST_ASSERT(ret == 0, "Failed to configure null port");
> +
> +	/* RX in no-rx mode should return 0 packets */
> +	nb_rx = rte_eth_rx_burst(norx_port, 0, rx_bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_rx == 0,
> +		    "Expected 0 packets in no-rx mode, got %u", nb_rx);
> +
> +	/* TX in no-rx mode should still work (frees packets) */
> +	for (i = 0; i < BURST_SIZE; i++) {
> +		tx_bufs[i] = rte_pktmbuf_alloc(mp);
> +		TEST_ASSERT(tx_bufs[i] != NULL, "Failed to allocate mbuf");
> +		tx_bufs[i]->data_len = 64;
> +		tx_bufs[i]->pkt_len = 64;
> +	}
> +
> +	nb_tx = rte_eth_tx_burst(norx_port, 0, tx_bufs, BURST_SIZE);
> +	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst in no-rx mode failed");
> +
> +	/* Cleanup */
> +	rte_eth_dev_stop(norx_port);
> +	rte_eth_dev_close(norx_port);
> +	rte_vdev_uninit("net_null_norx_test");
> +
> +	return TEST_SUCCESS;

Probably fine, but could also make it a mode for the rest of the tests to 
verify also statistics etc.

> +}
> +
> +/*
> + * Test: Link status
> + */
> +static int
> +test_null_link_status(void)
> +{
> +	struct rte_eth_link link;
> +	int ret;
> +
> +	ret = rte_eth_link_get_nowait(port_id, &link);
> +	TEST_ASSERT(ret == 0, "Failed to get link status");
> +
> +	/* After start, link should be UP */
> +	TEST_ASSERT(link.link_status == RTE_ETH_LINK_UP,
> +		    "Expected link UP after start");
> +	TEST_ASSERT(link.link_speed == RTE_ETH_SPEED_NUM_10G,
> +		    "Expected 10G link speed");

I am not sure it is important to test that the link speed is exactly 10G. Will 
it be a bug if it becomes 25G tomorrow? Probably any valid value would do.

> +	TEST_ASSERT(link.link_duplex == RTE_ETH_LINK_FULL_DUPLEX,
> +		    "Expected full duplex");
> +
> +	/* Stop the device */
> +	ret = rte_eth_dev_stop(port_id);
> +	TEST_ASSERT(ret == 0, "Failed to stop device");
> +
> +	ret = rte_eth_link_get_nowait(port_id, &link);
> +	TEST_ASSERT(ret == 0, "Failed to get link status after stop");
> +
> +	/* After stop, link should be DOWN */
> +	TEST_ASSERT(link.link_status == RTE_ETH_LINK_DOWN,
> +		    "Expected link DOWN after stop");
> +
> +	/* Restart for subsequent tests */
> +	ret = rte_eth_dev_start(port_id);
> +	TEST_ASSERT(ret == 0, "Failed to restart device");
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Device info
> + */
> +static int
> +test_null_dev_info(void)
> +{
> +	struct rte_eth_dev_info dev_info;
> +	int ret;
> +
> +	ret = rte_eth_dev_info_get(port_id, &dev_info);
> +	TEST_ASSERT(ret == 0, "Failed to get device info");
> +
> +	/* Verify expected device info values */
> +	TEST_ASSERT(dev_info.max_mac_addrs == 1,
> +		    "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
> +	TEST_ASSERT(dev_info.max_rx_pktlen == (uint32_t)-1,
> +		    "Unexpected max_rx_pktlen");

Why is (uint32_t)-1 is a valid packet length for this device? Can at actually 
accept them?

> +	TEST_ASSERT(dev_info.min_rx_bufsize == 0,
> +		    "Expected min_rx_bufsize=0, got %u", dev_info.min_rx_bufsize);
> +
> +	/* Check TX offload capabilities */
> +	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
> +		    "Expected MULTI_SEGS TX offload capability");

It sure sets these values, but are they correct values, and would anything else 
be incorrect?

> +	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MT_LOCKFREE,
> +		    "Expected MT_LOCKFREE TX offload capability");
> +
> +	/* Check RSS capabilities */
> +	TEST_ASSERT(dev_info.reta_size > 0, "Expected non-zero reta_size");
> +	TEST_ASSERT(dev_info.hash_key_size == 40,
> +		    "Expected hash_key_size=40, got %u", dev_info.hash_key_size);
> +	TEST_ASSERT(dev_info.flow_type_rss_offloads != 0,
> +		    "Expected RSS offloads to be set");
> +
> +	return TEST_SUCCESS;
> +}

// snip test_null_multiple_bursts, looks fine

> +/*
> + * Test: RSS configuration
> + * Note: RSS requires multi-queue configuration
> + */
> +static int
> +test_null_rss_config(void)
> +{
> +	struct rte_eth_dev_info dev_info;
> +	struct rte_eth_rss_conf rss_conf;
> +	struct rte_eth_conf port_conf = {0};
> +	uint8_t rss_key[40];
> +	uint16_t rss_port;
> +	const uint16_t num_queues = 2;
> +	uint16_t q;
> +	int ret;
> +
> +	/* Create a new null device for RSS testing with multiple queues */
> +	ret = create_null_port("net_null_rss_test", NULL, &rss_port);
> +	TEST_ASSERT(ret == 0, "Failed to create null port for RSS test");
> +
> +	ret = rte_eth_dev_info_get(rss_port, &dev_info);
> +	TEST_ASSERT(ret == 0, "Failed to get device info");
> +
> +	/* Configure with RSS enabled and multiple queues */
> +	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
> +	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
> +
> +	ret = rte_eth_dev_configure(rss_port, num_queues, num_queues, &port_conf);
> +	TEST_ASSERT(ret == 0, "Failed to configure RSS port");
> +
> +	for (q = 0; q < num_queues; q++) {
> +		ret = rte_eth_rx_queue_setup(rss_port, q, RING_SIZE,
> +					     rte_eth_dev_socket_id(rss_port),
> +					     NULL, mp);
> +		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
> +
> +		ret = rte_eth_tx_queue_setup(rss_port, q, RING_SIZE,
> +					     rte_eth_dev_socket_id(rss_port),
> +					     NULL);
> +		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
> +	}
> +
> +	ret = rte_eth_dev_start(rss_port);
> +	TEST_ASSERT(ret == 0, "Failed to start RSS port");
> +
> +	/* Get current RSS config */
> +	memset(&rss_conf, 0, sizeof(rss_conf));
> +	rss_conf.rss_key = rss_key;
> +	rss_conf.rss_key_len = sizeof(rss_key);
> +
> +	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
> +	TEST_ASSERT(ret == 0, "Failed to get RSS hash config");
> +
> +	/* Update RSS config with new key */
> +	memset(rss_key, 0x55, sizeof(rss_key));
> +	rss_conf.rss_key = rss_key;
> +	rss_conf.rss_key_len = sizeof(rss_key);
> +	rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
> +
> +	ret = rte_eth_dev_rss_hash_update(rss_port, &rss_conf);
> +	TEST_ASSERT(ret == 0, "Failed to update RSS hash config");
> +
> +	/* Verify the update */
> +	memset(rss_key, 0, sizeof(rss_key));
> +	rss_conf.rss_key = rss_key;
> +
> +	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
> +	TEST_ASSERT(ret == 0, "Failed to get RSS hash config after update");
> +
> +	/* Verify key was updated */
> +	for (unsigned int i = 0; i < sizeof(rss_key); i++) {
> +		TEST_ASSERT(rss_key[i] == 0x55,
> +			    "RSS key not updated at byte %u", i);
> +	}
> +

Can we receive and send something from/to these queues and verify resulting 
statistics? Statistics is one of the most important use cases for the null 
device, and it does benefit from multi-queue.

> +	/* Cleanup */
> +	rte_eth_dev_stop(rss_port);
> +	rte_eth_dev_close(rss_port);
> +	rte_vdev_uninit("net_null_rss_test");
> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: RETA (Redirection Table) configuration
> + * Note: RETA requires multi-queue RSS configuration
> + */
> +static int
> +test_null_reta_config(void)
> +{

Not sure who actually handles reta for the null device, additional tests 
actually using it may or may not be necessary depending on the answer.

// snip the rest of the function

> +}

// snip test_null_stats_reset, looks fine.

> +/*
> + * Test: MAC address operations
> + */
> +static int
> +test_null_mac_addr(void)
> +{
> +	struct rte_ether_addr mac_addr;
> +	struct rte_ether_addr new_mac = {
> +		.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
> +	};
> +	int ret;
> +
> +	/* Get current MAC address */
> +	ret = rte_eth_macaddr_get(port_id, &mac_addr);
> +	TEST_ASSERT(ret == 0, "Failed to get MAC address");
> +
> +	/* Set new MAC address */
> +	ret = rte_eth_dev_default_mac_addr_set(port_id, &new_mac);
> +	TEST_ASSERT(ret == 0, "Failed to set MAC address");

Should we now check that it was actually set?

> +
> +	return TEST_SUCCESS;
> +}
> +
> +/*
> + * Test: Promiscuous and allmulticast modes
> + */
> +static int
> +test_null_promisc_allmulti(void)
> +{
> +	int ret;
> +
> +	/* Test promiscuous mode - null PMD starts with promiscuous enabled */
> +	ret = rte_eth_promiscuous_get(port_id);
> +	TEST_ASSERT(ret == 1, "Expected promiscuous mode enabled");
> +
> +	/* Test allmulticast mode - null PMD starts with allmulti enabled */
> +	ret = rte_eth_allmulticast_get(port_id);
> +	TEST_ASSERT(ret == 1, "Expected allmulticast mode enabled");

Similar concerns as with other settings, are these specific values important?

> +
> +	return TEST_SUCCESS;
> +}
> +
> +static struct unit_test_suite null_pmd_test_suite = {
> +	.suite_name = "Null PMD Unit Test Suite",
> +	.setup = test_null_setup,
> +	.teardown = test_null_teardown,
> +	.unit_test_cases = {
> +		TEST_CASE(test_null_rx_basic),
> +		TEST_CASE(test_null_tx_basic),
> +		TEST_CASE(test_null_stats),
> +		TEST_CASE(test_null_custom_size),
> +		TEST_CASE(test_null_copy_mode),
> +		TEST_CASE(test_null_no_rx_mode),
> +		TEST_CASE(test_null_link_status),
> +		TEST_CASE(test_null_dev_info),
> +		TEST_CASE(test_null_multiple_bursts),
> +		TEST_CASE(test_null_rss_config),
> +		TEST_CASE(test_null_reta_config),
> +		TEST_CASE(test_null_stats_reset),
> +		TEST_CASE(test_null_mac_addr),
> +		TEST_CASE(test_null_promisc_allmulti),

test_pmd_ring.c is also doing some command-line testing, although it requires 
some cooperation from the test framework. Are we not going to cover this part 
for now?

> +
> +		TEST_CASES_END() /**< NULL terminate unit test array */
> +	}
> +};
> +
> +static int
> +test_pmd_null(void)
> +{
> +	return unit_test_suite_runner(&null_pmd_test_suite);
> +}
> +
> +REGISTER_FAST_TEST(null_pmd_autotest, true, true, test_pmd_null);
> --
> 2.51.0

Re: [PATCH] test: add a test for null PMD

[Stephen Hemminger]

On Mon, 5 Jan 2026 14:49:41 +0000
Marat Khalili <marat.khalili@huawei.com> wrote:
> Thank you for doing this. Having tests for things like this is important both 
> to make sure they work and as a form of documentation.
> 
> In my humble opinion we should not approach this mechanically though, which is 
> what AI tools tend to do. It is usually said that tests should test desired 
> behavior, not specific implementation. Particularly in settings some of the 
> values might not matter, or the whole range might be acceptable, in other cases 
> current implementation might be questionable and by writing a test we just 
> legitimize it.
> 
> Please more see comments inline.

I did not see anything obviously wrong with the tests that it generated so
far. And coverage is more important on legacy code.

> > diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
> > new file mode 100644
> > index 0000000000..ebc2447c6d
> > --- /dev/null
> > +++ b/app/test/test_pmd_null.c
> > @@ -0,0 +1,827 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2026 Stephen Hemminger
> > + */
> > +
> > +#include <inttypes.h>
> > +#include <stdbool.h>
> > +#include <stdio.h>
> > +#include <string.h>
> > +
> > +#include <rte_bus_vdev.h>
> > +#include <rte_cycles.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_ether.h>
> > +#include <rte_lcore.h>
> > +#include <rte_mbuf.h>
> > +#include <rte_mempool.h>  
> 
> I do not think it is a problem, but just curious: how does test_pmd_ring.c 
> manage to use much fewer includes?

I tend to run the tool iwyu on the generated code. This gives a more correct
set of includes without implied includes.

> > +/* Test device names */
> > +#define NULL_DEV_NAME "net_null_test"
> > +
> > +static struct rte_mempool *mp;
> > +static uint16_t port_id = RTE_MAX_ETHPORTS;
> > +static bool port_created;
> > +static bool port_started;  
> 
> // snip setup and teardown functions, could find nothing to nitpick there

The code is exercising device in multiple ways so it didn't seem to need them.
Would be better to avoid global variables though. Like the mempool should
be set in setup.

> Default packet size repeats a few times in this file, can we have a global
> constant for it?
> 
> > +		TEST_ASSERT(bufs[i]->pkt_len == 64,
> > +			    "Unexpected pkt_len: %u", bufs[i]->pkt_len);
> > +		TEST_ASSERT(bufs[i]->data_len == 64,
> > +			    "Unexpected data_len: %u", bufs[i]->data_len);
> > +	}
> > +

Right test should use RTE_ETHER_MIN_LEN

> > +	/* Allocate mbufs for TX */
> > +	for (i = 0; i < BURST_SIZE; i++) {
> > +		bufs[i] = rte_pktmbuf_alloc(mp);
> > +		TEST_ASSERT(bufs[i] != NULL, "Failed to allocate mbuf");
> > +		bufs[i]->data_len = 64;
> > +		bufs[i]->pkt_len = 64;  
> 
> It would help to test sending packets of various sizes, especially spanning 
> multiple buffers or allocating them at the edge of buffer. May even uncover 
> some bugs in the copy mode implementation ;)

Good point.
The copy mode is making several assumptions already and I see bugs there.
It is confusing dummy_packet as mbuf versus data.


The test and the driver should also test multi-segments.

> > +	/* After start, link should be UP */
> > +	TEST_ASSERT(link.link_status == RTE_ETH_LINK_UP,
> > +		    "Expected link UP after start");
> > +	TEST_ASSERT(link.link_speed == RTE_ETH_SPEED_NUM_10G,
> > +		    "Expected 10G link speed");  
> 
> I am not sure it is important to test that the link speed is exactly 10G. Will 
> it be a bug if it becomes 25G tomorrow? Probably any valid value would do.

It is a dummy driver, speed really doesn't matter and should probably be ignored.

> > +static int
> > +test_null_dev_info(void)
> > +{
> > +	struct rte_eth_dev_info dev_info;
> > +	int ret;
> > +
> > +	ret = rte_eth_dev_info_get(port_id, &dev_info);
> > +	TEST_ASSERT(ret == 0, "Failed to get device info");
> > +
> > +	/* Verify expected device info values */
> > +	TEST_ASSERT(dev_info.max_mac_addrs == 1,
> > +		    "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
> > +	TEST_ASSERT(dev_info.max_rx_pktlen == (uint32_t)-1,
> > +		    "Unexpected max_rx_pktlen");  
> 
> Why is (uint32_t)-1 is a valid packet length for this device? Can at actually 
> accept them?

This is awkward way of saying UINT32_MAX.
And it means the driver has no limit on what the receive buffer might be.
This is not really right it does have limits based on the device flags.

> 
> > +	TEST_ASSERT(dev_info.min_rx_bufsize == 0,
> > +		    "Expected min_rx_bufsize=0, got %u", dev_info.min_rx_bufsize);
> > +
> > +	/* Check TX offload capabilities */
> > +	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
> > +		    "Expected MULTI_SEGS TX offload capability");  
> 
> It sure sets these values, but are they correct values, and would anything else 
> be incorrect?

I think test is ok testing for what it expects to work.

> > +/*
> > + * Test: RSS configuration
> > + * Note: RSS requires multi-queue configuration
> > + */
> > +static int
> > +test_null_rss_config(void)
> > +{
> > +	struct rte_eth_dev_info dev_info;
> > +	struct rte_eth_rss_conf rss_conf;
> > +	struct rte_eth_conf port_conf = {0};
> > +	uint8_t rss_key[40];
> > +	uint16_t rss_port;
> > +	const uint16_t num_queues = 2;
> > +	uint16_t q;
> > +	int ret;
> > +
> > +	/* Create a new null device for RSS testing with multiple queues */
> > +	ret = create_null_port("net_null_rss_test", NULL, &rss_port);
> > +	TEST_ASSERT(ret == 0, "Failed to create null port for RSS test");
> > +
> > +	ret = rte_eth_dev_info_get(rss_port, &dev_info);
> > +	TEST_ASSERT(ret == 0, "Failed to get device info");
> > +
> > +	/* Configure with RSS enabled and multiple queues */
> > +	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
> > +	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
> > +
> > +	ret = rte_eth_dev_configure(rss_port, num_queues, num_queues, &port_conf);
> > +	TEST_ASSERT(ret == 0, "Failed to configure RSS port");
> > +
> > +	for (q = 0; q < num_queues; q++) {
> > +		ret = rte_eth_rx_queue_setup(rss_port, q, RING_SIZE,
> > +					     rte_eth_dev_socket_id(rss_port),
> > +					     NULL, mp);
> > +		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
> > +
> > +		ret = rte_eth_tx_queue_setup(rss_port, q, RING_SIZE,
> > +					     rte_eth_dev_socket_id(rss_port),
> > +					     NULL);
> > +		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
> > +	}
> > +
> > +	ret = rte_eth_dev_start(rss_port);
> > +	TEST_ASSERT(ret == 0, "Failed to start RSS port");
> > +
> > +	/* Get current RSS config */
> > +	memset(&rss_conf, 0, sizeof(rss_conf));
> > +	rss_conf.rss_key = rss_key;
> > +	rss_conf.rss_key_len = sizeof(rss_key);
> > +
> > +	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
> > +	TEST_ASSERT(ret == 0, "Failed to get RSS hash config");
> > +
> > +	/* Update RSS config with new key */
> > +	memset(rss_key, 0x55, sizeof(rss_key));
> > +	rss_conf.rss_key = rss_key;
> > +	rss_conf.rss_key_len = sizeof(rss_key);
> > +	rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
> > +
> > +	ret = rte_eth_dev_rss_hash_update(rss_port, &rss_conf);
> > +	TEST_ASSERT(ret == 0, "Failed to update RSS hash config");
> > +
> > +	/* Verify the update */
> > +	memset(rss_key, 0, sizeof(rss_key));
> > +	rss_conf.rss_key = rss_key;
> > +
> > +	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
> > +	TEST_ASSERT(ret == 0, "Failed to get RSS hash config after update");
> > +
> > +	/* Verify key was updated */
> > +	for (unsigned int i = 0; i < sizeof(rss_key); i++) {
> > +		TEST_ASSERT(rss_key[i] == 0x55,
> > +			    "RSS key not updated at byte %u", i);
> > +	}
> > +  
> 
> Can we receive and send something from/to these queues and verify resulting 
> statistics? Statistics is one of the most important use cases for the null 
> device, and it does benefit from multi-queue.

Use of RSS in Null PMD is odd. It really doesn't do RSS. It is lying about it.
The packets are never hashed on receive. Looks like it was just a way to exercise
the RSS API's.

My goal is to get some tests for vdev's where there are none now, and fix
some of the obvious wonky stuff in the drivers (like doing stats in odd and
slow ways).

[PATCH v2 0/2] net/null: add a test

[Stephen Hemminger]

Add a test and small improvement for null PMD

v2 - review feedback and small improvement

Stephen Hemminger (2):
  test: add a test for null PMD
  net/null: revise info_get

 app/test/meson.build            |   1 +
 app/test/test_pmd_null.c        | 811 ++++++++++++++++++++++++++++++++
 drivers/net/null/rte_eth_null.c |  11 +-
 3 files changed, 816 insertions(+), 7 deletions(-)
 create mode 100644 app/test/test_pmd_null.c

-- 
2.51.0

[PATCH v2 1/2] test: add a test for null PMD

[Stephen Hemminger]

Add a test for null PMD.
This test was generated with Claude AI based off of existing
test_pmd_ring.c with some cleanup afterwards.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test/meson.build     |   1 +
 app/test/test_pmd_null.c | 802 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 803 insertions(+)
 create mode 100644 app/test/test_pmd_null.c

diff --git a/app/test/meson.build b/app/test/meson.build
index efec42a6bf..a45991ec34 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -141,6 +141,7 @@ source_file_deps = {
     'test_per_lcore.c': [],
     'test_pflock.c': [],
     'test_pie.c': ['sched'],
+    'test_pmd_null.c': ['net_ring', 'ethdev', 'bus_vdev'],
     'test_pmd_perf.c': ['ethdev', 'net'] + packet_burst_generator_deps,
     'test_pmd_ring.c': ['net_ring', 'ethdev', 'bus_vdev'],
     'test_pmd_ring_perf.c': ['ethdev', 'net_ring', 'bus_vdev'],
diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
new file mode 100644
index 0000000000..c6a8bba701
--- /dev/null
+++ b/app/test/test_pmd_null.c
@@ -0,0 +1,802 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2026 Stephen Hemminger
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include <rte_bus_vdev.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_ether.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+#include <rte_random.h>
+
+#include "test.h"
+
+#define NUM_MBUFS 256
+#define MBUF_CACHE_SIZE 32
+#define BURST_SIZE 32
+#define RING_SIZE 512
+#define PACKET_SIZE 64
+
+/* Test device names */
+#define NULL_DEV_NAME "net_null_test"
+
+static struct rte_mempool *mp;
+static uint16_t port_id = RTE_MAX_ETHPORTS;
+
+static int
+create_null_port(const char *name, const char *args, uint16_t *out_port_id)
+{
+	int ret;
+
+	ret = rte_vdev_init(name, args);
+	if (ret != 0) {
+		printf("Failed to create null device '%s': %d\n", name, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_get_port_by_name(name, out_port_id);
+	if (ret != 0) {
+		printf("Failed to get port id for '%s': %d\n", name, ret);
+		rte_vdev_uninit(name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+configure_null_port(uint16_t pid)
+{
+	struct rte_eth_conf port_conf = {0};
+	struct rte_eth_dev_info dev_info;
+	int ret;
+
+	ret = rte_eth_dev_info_get(pid, &dev_info);
+	if (ret != 0) {
+		printf("Failed to get device info for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_configure(pid, 1, 1, &port_conf);
+	if (ret != 0) {
+		printf("Failed to configure port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_rx_queue_setup(pid, 0, RING_SIZE,
+				     rte_eth_dev_socket_id(pid),
+				     NULL, mp);
+	if (ret != 0) {
+		printf("Failed to setup RX queue for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_tx_queue_setup(pid, 0, RING_SIZE,
+				     rte_eth_dev_socket_id(pid),
+				     NULL);
+	if (ret != 0) {
+		printf("Failed to setup TX queue for port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	ret = rte_eth_dev_start(pid);
+	if (ret != 0) {
+		printf("Failed to start port %u: %d\n", pid, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+test_null_setup(void)
+{
+	/* Create mempool for mbufs */
+	mp = rte_pktmbuf_pool_create("null_test_pool", NUM_MBUFS,
+				     MBUF_CACHE_SIZE, 0,
+				     RTE_MBUF_DEFAULT_BUF_SIZE,
+				     rte_socket_id());
+	if (mp == NULL) {
+		printf("Failed to create mempool\n");
+		return -1;
+	}
+
+	/* Create and configure null port */
+	if (create_null_port(NULL_DEV_NAME, NULL, &port_id) != 0) {
+		printf("Failed to create null port\n");
+		return -1;
+	}
+
+	if (configure_null_port(port_id) != 0) {
+		printf("Failed to configure null port\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void
+test_null_teardown(void)
+{
+	/* Stop and close test port */
+	rte_eth_dev_stop(port_id);
+	rte_eth_dev_close(port_id);
+	rte_vdev_uninit(NULL_DEV_NAME);
+	port_id = RTE_MAX_ETHPORTS;
+
+	rte_mempool_free(mp);
+	mp = NULL;
+}
+
+/*
+ * Test: Basic RX - should return empty packets
+ */
+static int
+test_null_rx_basic(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_rx;
+	unsigned int i;
+
+	/* RX should return requested number of empty packets */
+	nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE,
+		    "Expected %u packets, got %u", BURST_SIZE, nb_rx);
+
+	/* Verify packets have expected properties */
+	for (i = 0; i < nb_rx; i++) {
+		TEST_ASSERT(bufs[i] != NULL, "Received NULL mbuf");
+		TEST_ASSERT(bufs[i]->port == port_id,
+			    "Unexpected port id in mbuf: %u", bufs[i]->port);
+
+		/* Default packet size is 64 bytes */
+		TEST_ASSERT(bufs[i]->pkt_len == PACKET_SIZE,
+			    "Unexpected pkt_len: %u", bufs[i]->pkt_len);
+		TEST_ASSERT(bufs[i]->data_len == PACKET_SIZE,
+			    "Unexpected data_len: %u", bufs[i]->data_len);
+	}
+
+	/* Free received mbufs */
+	rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+	return TEST_SUCCESS;
+}
+
+/* Create random valid ethernet packets */
+static int
+test_mbuf_setup_burst(struct rte_mbuf **bufs, unsigned int burst_size)
+{
+	unsigned int i;
+
+	if (rte_pktmbuf_alloc_bulk(mp, bufs, burst_size) != 0)
+		return -1;
+
+	for (i = 0; i < burst_size; i++) {
+		struct rte_mbuf *m = bufs[i];
+		uint16_t len;
+
+		/* Choose random length between ether min and available space */
+		len = rte_rand_max(rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN)
+			+ RTE_ETHER_MIN_LEN;
+		m->data_len = len;
+		m->buf_len = len;
+	}
+	return 0;
+}
+
+/*
+ * Test: Basic TX - should free all packets
+ */
+static int
+test_null_tx_basic(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_tx;
+	unsigned int pool_count_before, pool_count_after;
+
+	/* Allocate mbufs for TX */
+	TEST_ASSERT(test_mbuf_setup_burst(bufs, BURST_SIZE) == 0,
+		    "Could not allocate mbufs");
+
+	pool_count_before = rte_mempool_avail_count(mp);
+
+	/* TX should accept and free all packets */
+	nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE,
+		    "Expected to TX %u packets, but sent %u", BURST_SIZE, nb_tx);
+
+	pool_count_after = rte_mempool_avail_count(mp);
+
+	/* Verify mbufs were freed - pool should have same count */
+	TEST_ASSERT(pool_count_after >= pool_count_before,
+		    "Mbufs not freed: before=%u, after=%u",
+		    pool_count_before, pool_count_after);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Statistics verification
+ */
+static int
+test_null_stats(void)
+{
+	struct rte_eth_stats stats;
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	struct rte_mbuf *tx_bufs[BURST_SIZE];
+	uint16_t nb_rx, nb_tx;
+	int ret;
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Get initial stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+	TEST_ASSERT(stats.ipackets == 0, "Initial ipackets not zero");
+	TEST_ASSERT(stats.opackets == 0, "Initial opackets not zero");
+
+	/* Perform RX */
+	nb_rx = rte_eth_rx_burst(port_id, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+	/* Allocate and perform TX */
+	TEST_ASSERT(test_mbuf_setup_burst(tx_bufs, BURST_SIZE) == 0,
+		    "Could not allocate tx mbufs");
+
+	nb_tx = rte_eth_tx_burst(port_id, 0, tx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst failed");
+
+	/* Get updated stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats after RX/TX");
+
+	/* Verify stats */
+	TEST_ASSERT(stats.ipackets == BURST_SIZE,
+		    "Expected ipackets=%u, got %"PRIu64,
+		    BURST_SIZE, stats.ipackets);
+	TEST_ASSERT(stats.opackets == BURST_SIZE,
+		    "Expected opackets=%u, got %"PRIu64,
+		    BURST_SIZE, stats.opackets);
+
+	rte_pktmbuf_free_bulk(rx_bufs, nb_rx);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Custom packet size
+ */
+static int
+test_null_custom_size(void)
+{
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t custom_port;
+	uint16_t nb_rx;
+	unsigned int i;
+	const unsigned int custom_size = 256;
+	int ret;
+
+	/* Create null device with custom size */
+	ret = create_null_port("net_null_size_test", "size=256", &custom_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with custom size");
+
+	ret = configure_null_port(custom_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX should return packets with custom size */
+	nb_rx = rte_eth_rx_burst(custom_port, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst failed");
+
+	/* Verify custom packet size */
+	for (i = 0; i < nb_rx; i++) {
+		TEST_ASSERT(bufs[i]->pkt_len == custom_size,
+			    "Expected pkt_len=%u, got %u",
+			    custom_size, bufs[i]->pkt_len);
+		TEST_ASSERT(bufs[i]->data_len == custom_size,
+			    "Expected data_len=%u, got %u",
+			    custom_size, bufs[i]->data_len);
+	}
+	rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+	/* Cleanup custom port */
+	rte_eth_dev_stop(custom_port);
+	rte_eth_dev_close(custom_port);
+	rte_vdev_uninit("net_null_size_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Copy mode
+ */
+static int
+test_null_copy_mode(void)
+{
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	uint16_t copy_port, nb_rx;
+	int ret;
+
+	/* Create null device with copy enabled */
+	ret = create_null_port("net_null_copy_test", "copy=1", &copy_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with copy mode");
+
+	ret = configure_null_port(copy_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX in copy mode should work */
+	nb_rx = rte_eth_rx_burst(copy_port, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == BURST_SIZE, "RX burst in copy mode failed");
+
+	/* Free RX mbufs */
+	rte_pktmbuf_free_bulk(rx_bufs, nb_rx);
+
+	/* Cleanup */
+	rte_eth_dev_stop(copy_port);
+	rte_eth_dev_close(copy_port);
+	rte_vdev_uninit("net_null_copy_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: No-RX mode
+ */
+static int
+test_null_no_rx_mode(void)
+{
+	struct rte_mbuf *rx_bufs[BURST_SIZE];
+	struct rte_mbuf *tx_bufs[BURST_SIZE];
+	uint16_t norx_port, nb_rx, nb_tx;
+	int ret;
+
+	/* Create null device with no-rx enabled */
+	ret = create_null_port("net_null_norx_test", "no-rx=1", &norx_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port with no-rx mode");
+
+	ret = configure_null_port(norx_port);
+	TEST_ASSERT(ret == 0, "Failed to configure null port");
+
+	/* RX in no-rx mode should return 0 packets */
+	nb_rx = rte_eth_rx_burst(norx_port, 0, rx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx == 0,
+		    "Expected 0 packets in no-rx mode, got %u", nb_rx);
+
+	/* TX in no-rx mode should still work (frees packets) */
+	TEST_ASSERT(test_mbuf_setup_burst(tx_bufs, BURST_SIZE) == 0,
+		    "Could not allocate tx mbufs");
+
+	nb_tx = rte_eth_tx_burst(norx_port, 0, tx_bufs, BURST_SIZE);
+	TEST_ASSERT(nb_tx == BURST_SIZE, "TX burst in no-rx mode failed");
+
+	/* Cleanup */
+	rte_eth_dev_stop(norx_port);
+	rte_eth_dev_close(norx_port);
+	rte_vdev_uninit("net_null_norx_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Link status
+ */
+static int
+test_null_link_status(void)
+{
+	struct rte_eth_link link;
+	int ret;
+
+	ret = rte_eth_link_get_nowait(port_id, &link);
+	TEST_ASSERT(ret == 0, "Failed to get link status");
+
+	/* After start, link should be UP */
+	TEST_ASSERT(link.link_status == RTE_ETH_LINK_UP,
+		    "Expected link UP after start");
+	TEST_ASSERT(link.link_speed == RTE_ETH_SPEED_NUM_10G,
+		    "Expected 10G link speed");
+	TEST_ASSERT(link.link_duplex == RTE_ETH_LINK_FULL_DUPLEX,
+		    "Expected full duplex");
+
+	/* Stop the device */
+	ret = rte_eth_dev_stop(port_id);
+	TEST_ASSERT(ret == 0, "Failed to stop device");
+
+	ret = rte_eth_link_get_nowait(port_id, &link);
+	TEST_ASSERT(ret == 0, "Failed to get link status after stop");
+
+	/* After stop, link should be DOWN */
+	TEST_ASSERT(link.link_status == RTE_ETH_LINK_DOWN,
+		    "Expected link DOWN after stop");
+
+	/* Restart for subsequent tests */
+	ret = rte_eth_dev_start(port_id);
+	TEST_ASSERT(ret == 0, "Failed to restart device");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Device info
+ */
+static int
+test_null_dev_info(void)
+{
+	struct rte_eth_dev_info dev_info;
+	int ret;
+
+	ret = rte_eth_dev_info_get(port_id, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	/* Verify expected device info values */
+	TEST_ASSERT(dev_info.max_mac_addrs == 1,
+		    "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
+	TEST_ASSERT(dev_info.max_rx_pktlen == UINT32_MAX,
+		    "Unexpected max_rx_pktlen");
+	TEST_ASSERT(dev_info.min_rx_bufsize == 0,
+		    "Expected min_rx_bufsize=0, got %u", dev_info.min_rx_bufsize);
+
+	/* Check TX offload capabilities */
+	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MULTI_SEGS,
+		    "Expected MULTI_SEGS TX offload capability");
+	TEST_ASSERT(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MT_LOCKFREE,
+		    "Expected MT_LOCKFREE TX offload capability");
+
+	/* Check RSS capabilities */
+	TEST_ASSERT(dev_info.reta_size > 0, "Expected non-zero reta_size");
+	TEST_ASSERT(dev_info.hash_key_size == 40,
+		    "Expected hash_key_size=40, got %u", dev_info.hash_key_size);
+	TEST_ASSERT(dev_info.flow_type_rss_offloads != 0,
+		    "Expected RSS offloads to be set");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Multiple RX/TX bursts
+ */
+static int
+test_null_multiple_bursts(void)
+{
+	struct rte_eth_stats stats;
+	uint16_t nb_rx, nb_tx;
+	unsigned int burst;
+	const unsigned int num_bursts = 10;
+	int ret;
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Perform multiple RX bursts */
+	for (burst = 0; burst < num_bursts; burst++) {
+		struct rte_mbuf *bufs[BURST_SIZE];
+
+		nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+		TEST_ASSERT(nb_rx == BURST_SIZE,
+			    "Burst %u: Expected %u packets, got %u",
+			    burst, BURST_SIZE, nb_rx);
+
+		rte_pktmbuf_free_bulk(bufs, nb_rx);
+	}
+
+	/* Perform multiple TX bursts */
+	for (burst = 0; burst < num_bursts; burst++) {
+		struct rte_mbuf *bufs[BURST_SIZE];
+
+		TEST_ASSERT(test_mbuf_setup_burst(bufs, BURST_SIZE) == 0,
+			    "Could not allocate tx mbufs");
+
+		nb_tx = rte_eth_tx_burst(port_id, 0, bufs, BURST_SIZE);
+		TEST_ASSERT(nb_tx == BURST_SIZE,
+			    "Burst %u: Expected to TX %u, sent %u",
+			    burst, BURST_SIZE, nb_tx);
+	}
+
+	/* Verify total stats */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+
+	TEST_ASSERT(stats.ipackets == num_bursts * BURST_SIZE,
+		    "Expected ipackets=%u, got %"PRIu64,
+		    num_bursts * BURST_SIZE, stats.ipackets);
+	TEST_ASSERT(stats.opackets == num_bursts * BURST_SIZE,
+		    "Expected opackets=%u, got %"PRIu64,
+		    num_bursts * BURST_SIZE, stats.opackets);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: RSS configuration
+ * Note: RSS requires multi-queue configuration
+ */
+static int
+test_null_rss_config(void)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_rss_conf rss_conf;
+	struct rte_eth_conf port_conf = {0};
+	uint8_t rss_key[40];
+	uint16_t rss_port;
+	const uint16_t num_queues = 2;
+	uint16_t q;
+	int ret;
+
+	/* Create a new null device for RSS testing with multiple queues */
+	ret = create_null_port("net_null_rss_test", NULL, &rss_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port for RSS test");
+
+	ret = rte_eth_dev_info_get(rss_port, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	/* Configure with RSS enabled and multiple queues */
+	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_configure(rss_port, num_queues, num_queues, &port_conf);
+	TEST_ASSERT(ret == 0, "Failed to configure RSS port");
+
+	for (q = 0; q < num_queues; q++) {
+		ret = rte_eth_rx_queue_setup(rss_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(rss_port),
+					     NULL, mp);
+		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+		ret = rte_eth_tx_queue_setup(rss_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(rss_port),
+					     NULL);
+		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+	}
+
+	ret = rte_eth_dev_start(rss_port);
+	TEST_ASSERT(ret == 0, "Failed to start RSS port");
+
+	/* Get current RSS config */
+	memset(&rss_conf, 0, sizeof(rss_conf));
+	rss_conf.rss_key = rss_key;
+	rss_conf.rss_key_len = sizeof(rss_key);
+
+	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to get RSS hash config");
+
+	/* Update RSS config with new key */
+	memset(rss_key, 0x55, sizeof(rss_key));
+	rss_conf.rss_key = rss_key;
+	rss_conf.rss_key_len = sizeof(rss_key);
+	rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_rss_hash_update(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to update RSS hash config");
+
+	/* Verify the update */
+	memset(rss_key, 0, sizeof(rss_key));
+	rss_conf.rss_key = rss_key;
+
+	ret = rte_eth_dev_rss_hash_conf_get(rss_port, &rss_conf);
+	TEST_ASSERT(ret == 0, "Failed to get RSS hash config after update");
+
+	/* Verify key was updated */
+	for (unsigned int i = 0; i < sizeof(rss_key); i++) {
+		TEST_ASSERT(rss_key[i] == 0x55,
+			    "RSS key not updated at byte %u", i);
+	}
+
+	/* Cleanup */
+	rte_eth_dev_stop(rss_port);
+	rte_eth_dev_close(rss_port);
+	rte_vdev_uninit("net_null_rss_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: RETA (Redirection Table) configuration
+ * Note: RETA requires multi-queue RSS configuration
+ */
+static int
+test_null_reta_config(void)
+{
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_rss_reta_entry64 reta_conf[RTE_ETH_RSS_RETA_SIZE_128 /
+						 RTE_ETH_RETA_GROUP_SIZE];
+	struct rte_eth_conf port_conf = {0};
+	uint16_t reta_port;
+	const uint16_t num_queues = 2;
+	unsigned int i, j, nreta;
+	uint16_t q;
+	int ret;
+
+	/* Create a new null device for RETA testing with multiple queues */
+	ret = create_null_port("net_null_reta_test", NULL, &reta_port);
+	TEST_ASSERT(ret == 0, "Failed to create null port for RETA test");
+
+	ret = rte_eth_dev_info_get(reta_port, &dev_info);
+	TEST_ASSERT(ret == 0, "Failed to get device info");
+
+	TEST_ASSERT(dev_info.reta_size > 0, "RETA size is zero");
+
+	/* Configure with RSS enabled and multiple queues */
+	port_conf.rxmode.mq_mode = RTE_ETH_MQ_RX_RSS;
+	port_conf.rx_adv_conf.rss_conf.rss_hf = dev_info.flow_type_rss_offloads;
+
+	ret = rte_eth_dev_configure(reta_port, num_queues, num_queues, &port_conf);
+	TEST_ASSERT(ret == 0, "Failed to configure RETA port");
+
+	for (q = 0; q < num_queues; q++) {
+		ret = rte_eth_rx_queue_setup(reta_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(reta_port),
+					     NULL, mp);
+		TEST_ASSERT(ret == 0, "Failed to setup RX queue %u", q);
+
+		ret = rte_eth_tx_queue_setup(reta_port, q, RING_SIZE,
+					     rte_eth_dev_socket_id(reta_port),
+					     NULL);
+		TEST_ASSERT(ret == 0, "Failed to setup TX queue %u", q);
+	}
+
+	ret = rte_eth_dev_start(reta_port);
+	TEST_ASSERT(ret == 0, "Failed to start RETA port");
+
+	/* Initialize RETA config */
+	memset(reta_conf, 0, sizeof(reta_conf));
+	nreta = dev_info.reta_size / RTE_ETH_RETA_GROUP_SIZE;
+	for (i = 0; i < nreta; i++) {
+		reta_conf[i].mask = UINT64_MAX;
+		for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++)
+			reta_conf[i].reta[j] = j % num_queues;
+	}
+
+	/* Update RETA */
+	ret = rte_eth_dev_rss_reta_update(reta_port, reta_conf, dev_info.reta_size);
+	TEST_ASSERT(ret == 0, "Failed to update RETA");
+
+	/* Query RETA */
+	memset(reta_conf, 0, sizeof(reta_conf));
+	for (i = 0; i < nreta; i++)
+		reta_conf[i].mask = UINT64_MAX;
+
+	ret = rte_eth_dev_rss_reta_query(reta_port, reta_conf, dev_info.reta_size);
+	TEST_ASSERT(ret == 0, "Failed to query RETA");
+
+	/* Verify RETA values */
+	for (i = 0; i < nreta; i++) {
+		for (j = 0; j < RTE_ETH_RETA_GROUP_SIZE; j++) {
+			TEST_ASSERT(reta_conf[i].reta[j] == j % num_queues,
+				    "RETA mismatch at [%u][%u]", i, j);
+		}
+	}
+
+	/* Cleanup */
+	rte_eth_dev_stop(reta_port);
+	rte_eth_dev_close(reta_port);
+	rte_vdev_uninit("net_null_reta_test");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Stats reset
+ */
+static int
+test_null_stats_reset(void)
+{
+	struct rte_eth_stats stats;
+	struct rte_mbuf *bufs[BURST_SIZE];
+	uint16_t nb_rx;
+	int ret;
+
+	/* Generate some traffic */
+	nb_rx = rte_eth_rx_burst(port_id, 0, bufs, BURST_SIZE);
+	TEST_ASSERT(nb_rx > 0, "Failed to receive packets");
+
+	rte_pktmbuf_free_bulk(bufs, nb_rx);
+
+	/* Verify stats are non-zero */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats");
+	TEST_ASSERT(stats.ipackets > 0, "Expected non-zero ipackets");
+
+	/* Reset stats */
+	ret = rte_eth_stats_reset(port_id);
+	TEST_ASSERT(ret == 0, "Failed to reset stats");
+
+	/* Verify stats are zero */
+	ret = rte_eth_stats_get(port_id, &stats);
+	TEST_ASSERT(ret == 0, "Failed to get stats after reset");
+	TEST_ASSERT(stats.ipackets == 0,
+		    "Expected ipackets=0 after reset, got %"PRIu64,
+		    stats.ipackets);
+	TEST_ASSERT(stats.opackets == 0,
+		    "Expected opackets=0 after reset, got %"PRIu64,
+		    stats.opackets);
+	TEST_ASSERT(stats.ibytes == 0,
+		    "Expected ibytes=0 after reset, got %"PRIu64,
+		    stats.ibytes);
+	TEST_ASSERT(stats.obytes == 0,
+		    "Expected obytes=0 after reset, got %"PRIu64,
+		    stats.obytes);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: MAC address operations
+ */
+static int
+test_null_mac_addr(void)
+{
+	struct rte_ether_addr mac_addr;
+	struct rte_ether_addr new_mac = {
+		.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
+	};
+	int ret;
+
+	/* Get current MAC address */
+	ret = rte_eth_macaddr_get(port_id, &mac_addr);
+	TEST_ASSERT(ret == 0, "Failed to get MAC address");
+
+	/* Set new MAC address */
+	ret = rte_eth_dev_default_mac_addr_set(port_id, &new_mac);
+	TEST_ASSERT(ret == 0, "Failed to set MAC address");
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * Test: Promiscuous and allmulticast modes
+ */
+static int
+test_null_promisc_allmulti(void)
+{
+	int ret;
+
+	/* Test promiscuous mode - null PMD starts with promiscuous enabled */
+	ret = rte_eth_promiscuous_get(port_id);
+	TEST_ASSERT(ret == 1, "Expected promiscuous mode enabled");
+
+	/* Test allmulticast mode - null PMD starts with allmulti enabled */
+	ret = rte_eth_allmulticast_get(port_id);
+	TEST_ASSERT(ret == 1, "Expected allmulticast mode enabled");
+
+	return TEST_SUCCESS;
+}
+
+static struct unit_test_suite null_pmd_test_suite = {
+	.suite_name = "Null PMD Unit Test Suite",
+	.setup = test_null_setup,
+	.teardown = test_null_teardown,
+	.unit_test_cases = {
+		TEST_CASE(test_null_rx_basic),
+		TEST_CASE(test_null_tx_basic),
+		TEST_CASE(test_null_stats),
+		TEST_CASE(test_null_custom_size),
+		TEST_CASE(test_null_copy_mode),
+		TEST_CASE(test_null_no_rx_mode),
+		TEST_CASE(test_null_link_status),
+		TEST_CASE(test_null_dev_info),
+		TEST_CASE(test_null_multiple_bursts),
+		TEST_CASE(test_null_rss_config),
+		TEST_CASE(test_null_reta_config),
+		TEST_CASE(test_null_stats_reset),
+		TEST_CASE(test_null_mac_addr),
+		TEST_CASE(test_null_promisc_allmulti),
+
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
+static int
+test_pmd_null(void)
+{
+	return unit_test_suite_runner(&null_pmd_test_suite);
+}
+
+REGISTER_FAST_TEST(null_pmd_autotest, true, true, test_pmd_null);
-- 
2.51.0

[PATCH v2 2/2] net/null: revise info_get

[Stephen Hemminger]

The dev_info_get callback does not need to check for invalid arguments
since that is already done at ethdev layer.

Make the min/max MTU values reflect the most an Ethernet type
PMD would allow.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test/test_pmd_null.c        | 13 +++++++++++--
 drivers/net/null/rte_eth_null.c | 11 ++++-------
 2 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/app/test/test_pmd_null.c b/app/test/test_pmd_null.c
index c6a8bba701..ee62d7ecb5 100644
--- a/app/test/test_pmd_null.c
+++ b/app/test/test_pmd_null.c
@@ -430,6 +430,10 @@ static int
 test_null_dev_info(void)
 {
 	struct rte_eth_dev_info dev_info;
+	const uint16_t jumbo_mtu = RTE_ETHER_MAX_JUMBO_FRAME_LEN
+		- RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN;
+	const uint16_t min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN -
+		RTE_ETHER_CRC_LEN;
 	int ret;
 
 	ret = rte_eth_dev_info_get(port_id, &dev_info);
@@ -438,8 +442,13 @@ test_null_dev_info(void)
 	/* Verify expected device info values */
 	TEST_ASSERT(dev_info.max_mac_addrs == 1,
 		    "Expected max_mac_addrs=1, got %u", dev_info.max_mac_addrs);
-	TEST_ASSERT(dev_info.max_rx_pktlen == UINT32_MAX,
-		    "Unexpected max_rx_pktlen");
+
+	TEST_ASSERT(dev_info.max_mtu == jumbo_mtu,
+		    "Unexpected max_mtu: %u", dev_info.max_mtu);
+	TEST_ASSERT(dev_info.min_mtu == min_mtu,
+		    "Unexpected min_mtu: %u", dev_info.max_mtu);
+	TEST_ASSERT(dev_info.max_rx_pktlen == RTE_ETHER_MAX_JUMBO_FRAME_LEN,
+		    "Unexpected max_rx_pktlen: %u", dev_info.max_rx_pktlen);
 	TEST_ASSERT(dev_info.min_rx_bufsize == 0,
 		    "Expected min_rx_bufsize=0, got %u", dev_info.min_rx_bufsize);
 
diff --git a/drivers/net/null/rte_eth_null.c b/drivers/net/null/rte_eth_null.c
index 46e7e7bd8c..2928f0d2d5 100644
--- a/drivers/net/null/rte_eth_null.c
+++ b/drivers/net/null/rte_eth_null.c
@@ -298,19 +298,16 @@ static int
 eth_dev_info(struct rte_eth_dev *dev,
 		struct rte_eth_dev_info *dev_info)
 {
-	struct pmd_internals *internals;
-
-	if ((dev == NULL) || (dev_info == NULL))
-		return -EINVAL;
+	struct pmd_internals *internals = dev->data->dev_private;
 
-	internals = dev->data->dev_private;
 	dev_info->max_mac_addrs = 1;
-	dev_info->max_rx_pktlen = (uint32_t)-1;
 	dev_info->max_rx_queues = RTE_DIM(internals->rx_null_queues);
 	dev_info->max_tx_queues = RTE_DIM(internals->tx_null_queues);
-	dev_info->min_rx_bufsize = 0;
 	dev_info->tx_offload_capa = RTE_ETH_TX_OFFLOAD_MULTI_SEGS | RTE_ETH_TX_OFFLOAD_MT_LOCKFREE;
 
+	dev_info->max_rx_pktlen = RTE_ETHER_MAX_JUMBO_FRAME_LEN;
+	dev_info->max_mtu = RTE_ETHER_MAX_JUMBO_FRAME_LEN
+		- RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN;
 	dev_info->reta_size = internals->reta_size;
 	dev_info->flow_type_rss_offloads = internals->flow_type_rss_offloads;
 	dev_info->hash_key_size = sizeof(internals->rss_key);
-- 
2.51.0

RE: [PATCH v2 1/2] test: add a test for null PMD

[Marat Khalili]

> +/* Create random valid ethernet packets */
> +static int
> +test_mbuf_setup_burst(struct rte_mbuf **bufs, unsigned int burst_size)
> +{
> +	unsigned int i;
> +
> +	if (rte_pktmbuf_alloc_bulk(mp, bufs, burst_size) != 0)
> +		return -1;
> +
> +	for (i = 0; i < burst_size; i++) {
> +		struct rte_mbuf *m = bufs[i];
> +		uint16_t len;
> +
> +		/* Choose random length between ether min and available space */
> +		len = rte_rand_max(rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN)

Nit: could technically use rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN + 1.

> +			+ RTE_ETHER_MIN_LEN;
> +		m->data_len = len;
> +		m->buf_len = len;

Not sure why we are changing buf_len here.

> +	}
> +	return 0;
> +}

Would still be cool to verify non-standard data_off.

// snip

> +/*
> + * Test: MAC address operations
> + */
> +static int
> +test_null_mac_addr(void)
> +{
> +	struct rte_ether_addr mac_addr;
> +	struct rte_ether_addr new_mac = {
> +		.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
> +	};
> +	int ret;
> +
> +	/* Get current MAC address */
> +	ret = rte_eth_macaddr_get(port_id, &mac_addr);
> +	TEST_ASSERT(ret == 0, "Failed to get MAC address");
> +
> +	/* Set new MAC address */
> +	ret = rte_eth_dev_default_mac_addr_set(port_id, &new_mac);
> +	TEST_ASSERT(ret == 0, "Failed to set MAC address");
> +

Still not checking that it actually does something.

> +	return TEST_SUCCESS;
> +}

I still wish the test was more behavior- and less implementation-based.
It almost feels like it works around existing bugs in the module now.
However I agree that no tests whatsoever is probably worse, therefore

Acked-by: Marat Khalili <marat.khalili@huawei.com>

Re: [PATCH v2 1/2] test: add a test for null PMD

[Stephen Hemminger]

On Tue, 6 Jan 2026 17:40:43 +0000
Marat Khalili <marat.khalili@huawei.com> wrote:

> > +/* Create random valid ethernet packets */
> > +static int
> > +test_mbuf_setup_burst(struct rte_mbuf **bufs, unsigned int burst_size)
> > +{
> > +	unsigned int i;
> > +
> > +	if (rte_pktmbuf_alloc_bulk(mp, bufs, burst_size) != 0)
> > +		return -1;
> > +
> > +	for (i = 0; i < burst_size; i++) {
> > +		struct rte_mbuf *m = bufs[i];
> > +		uint16_t len;
> > +
> > +		/* Choose random length between ether min and available space */
> > +		len = rte_rand_max(rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN)  
> 
> Nit: could technically use rte_pktmbuf_tailroom(m) - RTE_ETHER_MIN_LEN + 1.
> 
> > +			+ RTE_ETHER_MIN_LEN;
> > +		m->data_len = len;
> > +		m->buf_len = len;  
> 
> Not sure why we are changing buf_len here.
> 
> > +	}
> > +	return 0;
> > +}  

Next version is going to use packet generator stuff that is in test infra now.