From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: gaetan.rivet@6wind.com, ophirmu@mellanox.com,
qi.z.zhang@intel.com, ferruh.yigit@intel.com, remes@netcope.com,
beilei.xing@intel.com, shahafs@mellanox.com, yskoh@mellanox.com,
rosen.xu@intel.com, stephen@networkplumber.org
Subject: Re: [dpdk-dev] [PATCH v5 5/7] drivers/bus: move driver assignment to end of probing
Date: Sun, 14 Oct 2018 22:53:51 +0200 [thread overview]
Message-ID: <2049676.QDb0BuiRl5@xps> (raw)
In-Reply-To: <20181014204747.26621-6-thomas@monjalon.net>
+Cc vmbus, ifpga, i40e, mlx and szedata2 maintainers
14/10/2018 22:47, Thomas Monjalon:
> The PCI mapping requires to know the PCI driver to use,
> even before the probing is done. That's why the PCI driver is
> referenced early inside the PCI device structure. See
> commit 1d20a073fa5e ("bus/pci: reference driver structure before mapping")
>
> However the rte_driver does not need to be referenced in rte_device
> before the device probing is done.
> By moving back this assignment at the end of the device probing,
> it becomes possible to make clear the status of a rte_device.
>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
> Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
> ---
> drivers/bus/ifpga/ifpga_bus.c | 9 ++++-----
> drivers/bus/pci/pci_common.c | 7 +++----
> drivers/bus/pci/rte_bus_pci.h | 2 +-
> drivers/bus/vdev/vdev.c | 5 ++---
> drivers/bus/vmbus/vmbus_common.c | 5 +++--
> drivers/net/i40e/i40e_vf_representor.c | 3 ---
> drivers/net/mlx4/mlx4.c | 1 -
> drivers/net/mlx5/mlx5.c | 1 -
> drivers/net/szedata2/rte_eth_szedata2.c | 6 +++---
> lib/librte_eal/common/include/rte_dev.h | 2 +-
> 10 files changed, 17 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/bus/ifpga/ifpga_bus.c b/drivers/bus/ifpga/ifpga_bus.c
> index 80663328a..fca2dbace 100644
> --- a/drivers/bus/ifpga/ifpga_bus.c
> +++ b/drivers/bus/ifpga/ifpga_bus.c
> @@ -280,14 +280,13 @@ ifpga_probe_one_driver(struct rte_afu_driver *drv,
>
> /* reference driver structure */
> afu_dev->driver = drv;
> - afu_dev->device.driver = &drv->driver;
>
> /* call the driver probe() function */
> ret = drv->probe(afu_dev);
> - if (ret) {
> + if (ret)
> afu_dev->driver = NULL;
> - afu_dev->device.driver = NULL;
> - }
> + else
> + afu_dev->device.driver = &drv->driver;
>
> return ret;
> }
> @@ -302,7 +301,7 @@ ifpga_probe_all_drivers(struct rte_afu_device *afu_dev)
> return -1;
>
> /* Check if a driver is already loaded */
> - if (afu_dev->driver != NULL)
> + if (afu_dev->device.driver != NULL)
> return 0;
>
> TAILQ_FOREACH(drv, &ifpga_afu_drv_list, next) {
> diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
> index c7695d108..d63e68045 100644
> --- a/drivers/bus/pci/pci_common.c
> +++ b/drivers/bus/pci/pci_common.c
> @@ -160,14 +160,12 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
> * driver flags for adjusting configuration.
> */
> dev->driver = dr;
> - dev->device.driver = &dr->driver;
>
> if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
> /* map resources for devices that use igb_uio */
> ret = rte_pci_map_device(dev);
> if (ret != 0) {
> dev->driver = NULL;
> - dev->device.driver = NULL;
> return ret;
> }
> }
> @@ -176,7 +174,6 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
> ret = dr->probe(dr, dev);
> if (ret) {
> dev->driver = NULL;
> - dev->device.driver = NULL;
> if ((dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) &&
> /* Don't unmap if device is unsupported and
> * driver needs mapped resources.
> @@ -184,6 +181,8 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
> !(ret > 0 &&
> (dr->drv_flags & RTE_PCI_DRV_KEEP_MAPPED_RES)))
> rte_pci_unmap_device(dev);
> + } else {
> + dev->device.driver = &dr->driver;
> }
>
> return ret;
> @@ -244,7 +243,7 @@ pci_probe_all_drivers(struct rte_pci_device *dev)
> return -1;
>
> /* Check if a driver is already loaded */
> - if (dev->driver != NULL)
> + if (dev->device.driver != NULL)
> return 0;
>
> FOREACH_DRIVER_ON_PCIBUS(dr) {
> diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
> index 0d1955ffe..984df2b37 100644
> --- a/drivers/bus/pci/rte_bus_pci.h
> +++ b/drivers/bus/pci/rte_bus_pci.h
> @@ -62,7 +62,7 @@ struct rte_pci_device {
> struct rte_mem_resource mem_resource[PCI_MAX_RESOURCE];
> /**< PCI Memory Resource */
> struct rte_intr_handle intr_handle; /**< Interrupt handle */
> - struct rte_pci_driver *driver; /**< Associated driver */
> + struct rte_pci_driver *driver; /**< PCI driver used in probing */
> uint16_t max_vfs; /**< sriov enable if not zero */
> enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
> char name[PCI_PRI_STR_SIZE+1]; /**< PCI location (ASCII) */
> diff --git a/drivers/bus/vdev/vdev.c b/drivers/bus/vdev/vdev.c
> index 0142fb2c8..3f27f3510 100644
> --- a/drivers/bus/vdev/vdev.c
> +++ b/drivers/bus/vdev/vdev.c
> @@ -150,10 +150,9 @@ vdev_probe_all_drivers(struct rte_vdev_device *dev)
>
> if (vdev_parse(name, &driver))
> return -1;
> - dev->device.driver = &driver->driver;
> ret = driver->probe(dev);
> - if (ret)
> - dev->device.driver = NULL;
> + if (ret == 0)
> + dev->device.driver = &driver->driver;
> return ret;
> }
>
> diff --git a/drivers/bus/vmbus/vmbus_common.c b/drivers/bus/vmbus/vmbus_common.c
> index e3ceb6906..de5548aa4 100644
> --- a/drivers/bus/vmbus/vmbus_common.c
> +++ b/drivers/bus/vmbus/vmbus_common.c
> @@ -111,7 +111,6 @@ vmbus_probe_one_driver(struct rte_vmbus_driver *dr,
>
> /* reference driver structure */
> dev->driver = dr;
> - dev->device.driver = &dr->driver;
>
> if (dev->device.numa_node < 0) {
> VMBUS_LOG(WARNING, " Invalid NUMA socket, default to 0");
> @@ -124,6 +123,8 @@ vmbus_probe_one_driver(struct rte_vmbus_driver *dr,
> if (ret) {
> dev->driver = NULL;
> rte_vmbus_unmap_device(dev);
> + } else {
> + dev->device.driver = &dr->driver;
> }
>
> return ret;
> @@ -142,7 +143,7 @@ vmbus_probe_all_drivers(struct rte_vmbus_device *dev)
> int rc;
>
> /* Check if a driver is already loaded */
> - if (dev->driver != NULL) {
> + if (dev->device.driver != NULL) {
> VMBUS_LOG(DEBUG, "VMBUS driver already loaded");
> return 0;
> }
> diff --git a/drivers/net/i40e/i40e_vf_representor.c b/drivers/net/i40e/i40e_vf_representor.c
> index 0bfbb4f60..24751d13c 100644
> --- a/drivers/net/i40e/i40e_vf_representor.c
> +++ b/drivers/net/i40e/i40e_vf_representor.c
> @@ -487,9 +487,6 @@ i40e_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params)
> if (representor->vf_id >= pf->vf_num)
> return -ENODEV;
>
> - /** representor shares the same driver as it's PF device */
> - ethdev->device->driver = representor->adapter->eth_dev->device->driver;
> -
> /* Set representor device ops */
> ethdev->dev_ops = &i40e_representor_dev_ops;
>
> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
> index defc0d4b0..3de7bc53e 100644
> --- a/drivers/net/mlx4/mlx4.c
> +++ b/drivers/net/mlx4/mlx4.c
> @@ -734,7 +734,6 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
> eth_dev->data->mac_addrs = priv->mac;
> eth_dev->device = &pci_dev->device;
> rte_eth_copy_pci_info(eth_dev, pci_dev);
> - eth_dev->device->driver = &mlx4_driver.driver;
> /* Initialize local interrupt handle for current port. */
> priv->intr_handle = (struct rte_intr_handle){
> .fd = -1,
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 795a21977..8cbfee1ba 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -1090,7 +1090,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
> priv->dev_data = eth_dev->data;
> eth_dev->data->mac_addrs = priv->mac;
> eth_dev->device = dpdk_dev;
> - eth_dev->device->driver = &mlx5_driver.driver;
> err = mlx5_uar_init_primary(eth_dev);
> if (err) {
> err = rte_errno;
> diff --git a/drivers/net/szedata2/rte_eth_szedata2.c b/drivers/net/szedata2/rte_eth_szedata2.c
> index 8f92e72f2..4e5e01cf1 100644
> --- a/drivers/net/szedata2/rte_eth_szedata2.c
> +++ b/drivers/net/szedata2/rte_eth_szedata2.c
> @@ -1474,7 +1474,7 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev, struct port_info *pi)
> PMD_INIT_FUNC_TRACE();
>
> PMD_INIT_LOG(INFO, "Initializing eth_dev %s (driver %s)", data->name,
> - dev->device->driver->name);
> + RTE_STR(RTE_SZEDATA2_DRIVER_NAME));
>
> /* Fill internal private structure. */
> internals->dev = dev;
> @@ -1525,7 +1525,7 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev, struct port_info *pi)
> ether_addr_copy(ð_addr, data->mac_addrs);
>
> PMD_INIT_LOG(INFO, "%s device %s successfully initialized",
> - dev->device->driver->name, data->name);
> + RTE_STR(RTE_SZEDATA2_DRIVER_NAME), data->name);
>
> return 0;
> }
> @@ -1547,7 +1547,7 @@ rte_szedata2_eth_dev_uninit(struct rte_eth_dev *dev)
> rte_free(dev->data->mac_addrs);
>
> PMD_DRV_LOG(INFO, "%s device %s successfully uninitialized",
> - dev->device->driver->name, dev->data->name);
> + RTE_STR(RTE_SZEDATA2_DRIVER_NAME), dev->data->name);
>
> return 0;
> }
> diff --git a/lib/librte_eal/common/include/rte_dev.h b/lib/librte_eal/common/include/rte_dev.h
> index 036180ff3..5084c645b 100644
> --- a/lib/librte_eal/common/include/rte_dev.h
> +++ b/lib/librte_eal/common/include/rte_dev.h
> @@ -156,7 +156,7 @@ struct rte_driver {
> struct rte_device {
> TAILQ_ENTRY(rte_device) next; /**< Next device */
> const char *name; /**< Device name */
> - const struct rte_driver *driver;/**< Associated driver */
> + const struct rte_driver *driver; /**< Driver assigned after probing */
> const struct rte_bus *bus; /**< Bus handle assigned on scan */
> int numa_node; /**< NUMA node connection */
> struct rte_devargs *devargs; /**< Device user arguments */
>
next prev parent reply other threads:[~2018-10-14 20:53 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-07 23:09 [dpdk-dev] [RFC] eal: allow hotplug to skip an already probed device Thomas Monjalon
2018-09-13 6:29 ` Ophir Munk
2018-09-16 10:14 ` Ophir Munk
2018-09-28 16:40 ` [dpdk-dev] [PATCH v2 0/3] " Thomas Monjalon
2018-09-28 16:40 ` [dpdk-dev] [PATCH v2 1/3] drivers/bus: move driver assignment to end of probing Thomas Monjalon
2018-09-28 16:40 ` [dpdk-dev] [PATCH v2 2/3] eal: add function to query device status Thomas Monjalon
2018-09-28 16:40 ` [dpdk-dev] [PATCH v2 3/3] eal: allow probing a device again Thomas Monjalon
2018-10-04 9:44 ` Doherty, Declan
2018-10-04 14:25 ` Thomas Monjalon
2018-10-07 22:09 ` [dpdk-dev] [PATCH v3 0/3] eal: allow hotplug to skip an already probed device Thomas Monjalon
2018-10-07 22:09 ` [dpdk-dev] [PATCH v3 1/3] drivers/bus: move driver assignment to end of probing Thomas Monjalon
2018-10-08 8:05 ` Andrew Rybchenko
2018-10-11 10:53 ` Andrew Rybchenko
2018-10-11 11:45 ` Thomas Monjalon
2018-10-11 11:54 ` Andrew Rybchenko
2018-10-11 12:59 ` Thomas Monjalon
2018-10-11 13:15 ` Andrew Rybchenko
2018-10-11 15:29 ` Thomas Monjalon
2018-10-11 15:41 ` Andrew Rybchenko
2018-10-11 16:00 ` Thomas Monjalon
2018-10-07 22:09 ` [dpdk-dev] [PATCH v3 2/3] eal: add function to query device status Thomas Monjalon
2018-10-08 8:05 ` Andrew Rybchenko
2018-10-07 22:09 ` [dpdk-dev] [PATCH v3 3/3] eal: allow probing a device again Thomas Monjalon
2018-10-08 8:05 ` Andrew Rybchenko
2018-10-11 21:02 ` [dpdk-dev] [PATCH v4 0/4] eal: allow hotplug to skip an already probed device Thomas Monjalon
2018-10-11 21:02 ` [dpdk-dev] [PATCH v4 1/4] ethdev: rename memzones allocated for DMA Thomas Monjalon
2018-10-12 7:53 ` Andrew Rybchenko
2018-10-12 16:40 ` Thomas Monjalon
2018-10-12 16:42 ` Andrew Rybchenko
2018-10-12 16:46 ` Andrew Rybchenko
2018-10-12 17:18 ` Thomas Monjalon
2018-10-12 17:21 ` Thomas Monjalon
2018-10-12 17:51 ` Andrew Rybchenko
2018-10-11 21:02 ` [dpdk-dev] [PATCH v4 2/4] drivers/bus: move driver assignment to end of probing Thomas Monjalon
2018-10-12 7:44 ` Andrew Rybchenko
2018-10-12 8:32 ` Jan Remeš
2018-10-12 10:45 ` Thomas Monjalon
2018-10-12 15:50 ` Thomas Monjalon
2018-10-11 21:02 ` [dpdk-dev] [PATCH v4 3/4] eal: add function to query device status Thomas Monjalon
2018-10-11 21:02 ` [dpdk-dev] [PATCH v4 4/4] eal: allow probing a device again Thomas Monjalon
2018-10-12 9:26 ` [dpdk-dev] [PATCH v4 0/4] eal: allow hotplug to skip an already probed device Andrew Rybchenko
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 0/7] " Thomas Monjalon
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 1/7] net/mlx5: remove useless driver name comparison Thomas Monjalon
2018-10-14 20:49 ` Thomas Monjalon
2018-10-15 5:53 ` Shahaf Shuler
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 2/7] ethdev: rename memzones allocated for DMA Thomas Monjalon
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 3/7] cryptodev: remove driver name from logs Thomas Monjalon
2018-10-15 8:51 ` Thomas Monjalon
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 4/7] compressdev: " Thomas Monjalon
2018-10-15 8:51 ` Thomas Monjalon
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 5/7] drivers/bus: move driver assignment to end of probing Thomas Monjalon
2018-10-14 20:53 ` Thomas Monjalon [this message]
2018-10-15 6:11 ` Xu, Rosen
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 6/7] eal: add function to query device status Thomas Monjalon
2018-10-14 20:47 ` [dpdk-dev] [PATCH v5 7/7] eal: allow probing a device again Thomas Monjalon
2018-10-16 10:40 ` Shreyansh Jain
2018-10-17 11:37 ` [dpdk-dev] [PATCH v5 0/7] allow hotplug to skip an already probed device Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2049676.QDb0BuiRl5@xps \
--to=thomas@monjalon.net \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=gaetan.rivet@6wind.com \
--cc=ophirmu@mellanox.com \
--cc=qi.z.zhang@intel.com \
--cc=remes@netcope.com \
--cc=rosen.xu@intel.com \
--cc=shahafs@mellanox.com \
--cc=stephen@networkplumber.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).