From: Thomas Monjalon <thomas@monjalon.net>
To: Matan Azrad <matan@nvidia.com>,
Slava Ovsiienko <viacheslavo@nvidia.com>,
Ori Kam <orika@nvidia.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Jack Min <jackmin@mellanox.com>,
Ori Kam <orika@mellanox.com>, Suanming Mou <suanmingm@nvidia.com>,
Asaf Penso <asafp@nvidia.com>
Subject: Re: [dpdk-dev] [PATCH 1/5] net/mlx5: fix protocol size for raw encap judgement
Date: Mon, 23 Nov 2020 09:12:52 +0100 [thread overview]
Message-ID: <2111543.zL4mt2f7QZ@thomas> (raw)
In-Reply-To: <DM6PR12MB4987956055655459B21809CAD6FC0@DM6PR12MB4987.namprd12.prod.outlook.com>
23/11/2020 08:54, Ori Kam:
> From: Matan Azrad <matan@nvidia.com>
> > From: Thomas Monjalon
> > > 16/11/2020 08:55, Xiaoyu Min:
> > > > From: Xiaoyu Min <jackmin@nvidia.com>
> > > >
> > > > The rte_flow_item_eth and rte_flow_item_vlan items are refined.
> > > > The structs do not exactly represent the packet bits captured on the
> > > > wire anymore.
> > > > Should use real header instead of the whole struct.
> > > >
> > > > Replace the rte_flow_item_* with the existing corresponding rte_*_hdr.
> > > >
> > > > Fixes: 09315fc83861 ("ethdev: add VLAN attributes to ethernet and VLAN
> > > > items")
> > > >
> > > > Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
> > > > ---
> > > > drivers/net/mlx5/mlx5_flow.c | 12 ++++++------
> > > > drivers/net/mlx5/mlx5_flow.h | 4 ++--
> > > > 2 files changed, 8 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/net/mlx5/mlx5_flow.c
> > > > b/drivers/net/mlx5/mlx5_flow.c index 324349ed19..34b7a2f137 100644
> > > > --- a/drivers/net/mlx5/mlx5_flow.c
> > > > +++ b/drivers/net/mlx5/mlx5_flow.c
> > > > @@ -3655,8 +3655,8 @@ flow_check_hairpin_split(struct rte_eth_dev
> > *dev,
> > > > case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> > > > raw_encap = actions->conf;
> > > > if (raw_encap->size >
> > > > - (sizeof(struct rte_flow_item_eth) +
> > > > - sizeof(struct rte_flow_item_ipv4)))
> > > > + (sizeof(struct rte_ether_hdr) +
> > > > + sizeof(struct rte_ipv4_hdr)))
> > > > split++;
> > > > action_n++;
> > > > break;
> > > > @@ -4092,8 +4092,8 @@ flow_hairpin_split(struct rte_eth_dev *dev,
> > > > case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> > > > raw_encap = actions->conf;
> > > > if (raw_encap->size >
> > > > - (sizeof(struct rte_flow_item_eth) +
> > > > - sizeof(struct rte_flow_item_ipv4))) {
> > > > + (sizeof(struct rte_ether_hdr) +
> > > > + sizeof(struct rte_ipv4_hdr))) {
> > > > memcpy(actions_tx, actions,
> > > > sizeof(struct rte_flow_action));
> > > > actions_tx++; @@ -4107,8 +4107,8 @@
> > > > flow_hairpin_split(struct rte_eth_dev *dev,
> > > > case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
> > > > raw_decap = actions->conf;
> > > > if (raw_decap->size <
> > > > - (sizeof(struct rte_flow_item_eth) +
> > > > - sizeof(struct rte_flow_item_ipv4))) {
> > > > + (sizeof(struct rte_ether_hdr) +
> > > > + sizeof(struct rte_ipv4_hdr))) {
> > > > memcpy(actions_tx, actions,
> > > > sizeof(struct rte_flow_action));
> > > > actions_tx++; diff --git
> > > > a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h index
> > > > 5fac8672fc..3b28c48a1d 100644
> > > > --- a/drivers/net/mlx5/mlx5_flow.h
> > > > +++ b/drivers/net/mlx5/mlx5_flow.h
> > > > @@ -345,8 +345,8 @@ enum mlx5_feature_name { #define
> > > > MLX5_GENEVE_OPT_LEN_0 14 #define MLX5_GENEVE_OPT_LEN_1 63
> > > >
> > > > -#define MLX5_ENCAPSULATION_DECISION_SIZE (sizeof(struct
> > > rte_flow_item_eth) + \
> > > > - sizeof(struct rte_flow_item_ipv4))
> > > > +#define MLX5_ENCAPSULATION_DECISION_SIZE (sizeof(struct
> > > rte_ether_hdr) + \
> > > > + sizeof(struct rte_ipv4_hdr))
> > >
> > > This constant should be used above in hairpin functions.
> > > Will change while merging.
> >
> > +1
> >
>
> Why above the hairpin functions? This is correct for all encap decisions.
Other functions were already using this macro.
Only hairpin functions were not using it.
So I changed on apply.
next prev parent reply other threads:[~2020-11-23 8:13 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 7:55 [dpdk-dev] [PATCH 0/5] fix protocol size calculation Xiaoyu Min
2020-11-16 7:55 ` [dpdk-dev] [PATCH 1/5] net/mlx5: fix protocol size for raw encap judgement Xiaoyu Min
2020-11-17 13:25 ` Matan Azrad
2020-11-22 14:21 ` Thomas Monjalon
2020-11-22 15:32 ` Thomas Monjalon
2020-11-22 16:04 ` Matan Azrad
2020-11-23 7:54 ` Ori Kam
2020-11-23 8:12 ` Thomas Monjalon [this message]
2020-11-16 7:55 ` [dpdk-dev] [PATCH 2/5] app/flow-perf: fix protocol size for raw encap Xiaoyu Min
2020-11-16 7:55 ` [dpdk-dev] [PATCH 3/5] net/bnxt: fix protocol size for VXLAN encap copy Xiaoyu Min
2020-11-16 16:12 ` Ferruh Yigit
2020-11-18 0:34 ` Ajit Khaparde
2020-11-18 6:37 ` Andrew Rybchenko
2020-11-18 17:44 ` Ajit Khaparde
2020-11-16 7:55 ` [dpdk-dev] [PATCH 4/5] net/iavf: fix protocol size for virtchnl copy Xiaoyu Min
2020-11-16 16:23 ` Ferruh Yigit
2020-11-22 13:28 ` Jack Min
2020-11-22 14:15 ` Thomas Monjalon
2020-11-23 10:02 ` Ferruh Yigit
2020-11-23 10:49 ` Ferruh Yigit
2020-11-24 21:58 ` Thomas Monjalon
2020-11-27 1:17 ` Xing, Beilei
2020-11-16 7:55 ` [dpdk-dev] [PATCH 5/5] net/softnic: update headers size calculation Xiaoyu Min
2020-11-16 16:27 ` Ferruh Yigit
2020-11-16 19:09 ` Dekel Peled
2020-11-17 10:30 ` Ferruh Yigit
2020-11-17 12:41 ` Dekel Peled
2020-11-17 15:43 ` Singh, Jasvinder
2020-11-18 2:23 ` Zhou, JunX W
2020-11-22 16:11 ` [dpdk-dev] [PATCH 0/5] fix protocol " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2111543.zL4mt2f7QZ@thomas \
--to=thomas@monjalon.net \
--cc=asafp@nvidia.com \
--cc=dev@dpdk.org \
--cc=jackmin@mellanox.com \
--cc=matan@nvidia.com \
--cc=orika@mellanox.com \
--cc=orika@nvidia.com \
--cc=suanmingm@nvidia.com \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).