From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Zhang, AlvinX" <alvinx.zhang@intel.com>,
"Zhang, Qi Z" <qi.z.zhang@intel.com>,
"Guo, Junfeng" <junfeng.guo@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Zhang, AlvinX" <alvinx.zhang@intel.com>
Subject: Re: [dpdk-dev] [PATCH] net/ice: add ability to reduce the Rx latency
Date: Thu, 16 Sep 2021 03:07:47 +0000 [thread overview]
Message-ID: <232754d5e7f846af8b884cd4404b8b4a@intel.com> (raw)
In-Reply-To: <20210914013123.23768-1-alvinx.zhang@intel.com>
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Alvin Zhang
> Sent: 2021年9月14日 9:31
> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Guo, Junfeng <junfeng.guo@intel.com>
> Cc: dev@dpdk.org; Zhang, AlvinX <alvinx.zhang@intel.com>
> Subject: [dpdk-dev] [PATCH] net/ice: add ability to reduce the Rx latency
>
> This patch adds a devarg parameter to enable/disable reducing the Rx latency.
>
> Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
> ---
> doc/guides/nics/ice.rst | 8 ++++++++
> drivers/net/ice/ice_ethdev.c | 26 +++++++++++++++++++++++---
> drivers/net/ice/ice_ethdev.h | 1 +
> 3 files changed, 32 insertions(+), 3 deletions(-)
>
> diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst index
> 5bc472f..3db0430 100644
> --- a/doc/guides/nics/ice.rst
> +++ b/doc/guides/nics/ice.rst
> @@ -219,6 +219,14 @@ Runtime Config Options
>
> These ICE_DBG_XXX are defined in ``drivers/net/ice/base/ice_type.h``.
>
> +- ``Reduce Rx interrupts and latency`` (default ``0``)
> +
> + vRAN workloads require low latency DPDK interface for the front haul
> + interface connection to Radio. Now we can reduce Rx interrupts and
> + latency by specify ``1`` for parameter ``rx-low-latency``::
> +
> + -a 0000:88:00.0,rx-low-latency=1
> +
> Driver compilation and testing
> ------------------------------
>
> diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c index
> a4cd39c..85662e4 100644
> --- a/drivers/net/ice/ice_ethdev.c
> +++ b/drivers/net/ice/ice_ethdev.c
> @@ -29,12 +29,14 @@
> #define ICE_PIPELINE_MODE_SUPPORT_ARG "pipeline-mode-support"
> #define ICE_PROTO_XTR_ARG "proto_xtr"
> #define ICE_HW_DEBUG_MASK_ARG "hw_debug_mask"
> +#define ICE_RX_LOW_LATENCY "rx-low-latency"
>
> static const char * const ice_valid_args[] = {
> ICE_SAFE_MODE_SUPPORT_ARG,
> ICE_PIPELINE_MODE_SUPPORT_ARG,
> ICE_PROTO_XTR_ARG,
> ICE_HW_DEBUG_MASK_ARG,
> + ICE_RX_LOW_LATENCY,
> NULL
> };
>
> @@ -1827,6 +1829,9 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
> if (ret)
> goto bail;
>
> + ret = rte_kvargs_process(kvlist, ICE_RX_LOW_LATENCY,
> + &parse_bool, &ad->devargs.rx_low_latency);
> +
> bail:
> rte_kvargs_free(kvlist);
> return ret;
> @@ -3144,8 +3149,9 @@ static int ice_init_rss(struct ice_pf *pf) {
> struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
> uint32_t val, val_tx;
> - int i;
> + int rx_low_latency, i;
>
> + rx_low_latency = vsi->adapter->devargs.rx_low_latency;
> for (i = 0; i < nb_queue; i++) {
> /*do actual bind*/
> val = (msix_vect & QINT_RQCTL_MSIX_INDX_M) | @@ -3155,8
> +3161,21 @@ static int ice_init_rss(struct ice_pf *pf)
>
> PMD_DRV_LOG(INFO, "queue %d is binding to vect %d",
> base_queue + i, msix_vect);
> +
> /* set ITR0 value */
> - ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
> + if (rx_low_latency) {
> + /**
> + * Empirical configuration for optimal real time
> + * latency reduced interrupt throttling to 2us
> + */
> + ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x1);
> + ICE_WRITE_REG(hw, QRX_ITR(base_queue + i),
> + QRX_ITR_NO_EXPR_M);
> + } else {
> + ICE_WRITE_REG(hw, GLINT_ITR(0, msix_vect), 0x2);
> + ICE_WRITE_REG(hw, QRX_ITR(base_queue + i), 0);
> + }
According to commit: 8b20510a042a, the previous value of 0x2 means 2us.
> +
> ICE_WRITE_REG(hw, QINT_RQCTL(base_queue + i), val);
> ICE_WRITE_REG(hw, QINT_TQCTL(base_queue + i), val_tx);
> }
> @@ -5314,7 +5333,8 @@ static int ice_xstats_get_names(__rte_unused struct
> rte_eth_dev *dev,
> ICE_HW_DEBUG_MASK_ARG "=0xXXX"
> ICE_PROTO_XTR_ARG
> "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>"
> ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
> - ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
> + ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
> + ICE_RX_LOW_LATENCY "=<0|1>");
>
> RTE_LOG_REGISTER_SUFFIX(ice_logtype_init, init, NOTICE);
> RTE_LOG_REGISTER_SUFFIX(ice_logtype_driver, driver, NOTICE); diff --git
> a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h index
> b4bf651..c61cc1f 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -463,6 +463,7 @@ struct ice_pf {
> * Cache devargs parse result.
> */
> struct ice_devargs {
> + int rx_low_latency;
> int safe_mode_support;
> uint8_t proto_xtr_dflt;
> int pipe_mode_support;
> --
> 1.8.3.1
next prev parent reply other threads:[~2021-09-16 3:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 1:31 Alvin Zhang
2021-09-16 3:07 ` Tu, Lijuan [this message]
2021-09-16 8:28 ` Zhang, AlvinX
2021-09-17 17:25 ` Kevin Traynor
2021-09-18 1:33 ` Zhang, AlvinX
2021-09-21 9:20 ` Kevin Traynor
2021-09-22 2:16 ` Zhang, AlvinX
2021-09-28 9:22 ` Kevin Traynor
2021-09-18 2:59 ` [dpdk-dev] [PATCH v2] net/ice: add support for low " Alvin Zhang
2021-09-24 8:56 ` [dpdk-dev] [PATCH v3] " Alvin Zhang
2021-09-24 9:10 ` Zhang, Qi Z
2021-09-24 9:18 ` [dpdk-dev] [PATCH v4] " Alvin Zhang
2021-09-24 9:34 ` [dpdk-dev] [PATCH v5] " Alvin Zhang
2021-09-24 10:53 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=232754d5e7f846af8b884cd4404b8b4a@intel.com \
--to=lijuan.tu@intel.com \
--cc=alvinx.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).