* [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded
@ 2015-03-02 8:31 Michael Qiu
2015-03-05 1:57 ` Qiu, Michael
2015-03-06 15:03 ` De Lara Guarch, Pablo
0 siblings, 2 replies; 4+ messages in thread
From: Michael Qiu @ 2015-03-02 8:31 UTC (permalink / raw)
To: dev
As hotplug has been enabled, start the testpmd with no nic binded
will show one error log "Please stop the ports first":
Interactive-mode selected
Please stop the ports first
Done
testpmd>
This issue is cause by the logic of check link status.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
---
app/test-pmd/testpmd.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 61291be..e556b4c 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1315,7 +1315,7 @@ port_is_closed(portid_t port_id)
int
start_port(portid_t pid)
{
- int diag, need_check_link_status = 0;
+ int diag, need_check_link_status = -1;
portid_t pi;
queueid_t qi;
struct rte_port *port;
@@ -1337,6 +1337,7 @@ start_port(portid_t pid)
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
+ need_check_link_status = 0;
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
RTE_PORT_HANDLING) == 0) {
@@ -1457,9 +1458,9 @@ start_port(portid_t pid)
need_check_link_status = 1;
}
- if (need_check_link_status && !no_link_check)
+ if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
- else
+ else if (need_check_link_status == 0)
printf("Please stop the ports first\n");
printf("Done\n");
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded
2015-03-02 8:31 [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded Michael Qiu
@ 2015-03-05 1:57 ` Qiu, Michael
2015-03-06 15:03 ` De Lara Guarch, Pablo
1 sibling, 0 replies; 4+ messages in thread
From: Qiu, Michael @ 2015-03-05 1:57 UTC (permalink / raw)
To: dev
Hi, all
What about this patch?
Thanks,
Michael
On 3/2/2015 4:31 PM, Qiu, Michael wrote:
> As hotplug has been enabled, start the testpmd with no nic binded
> will show one error log "Please stop the ports first":
>
> Interactive-mode selected
> Please stop the ports first
> Done
> testpmd>
>
> This issue is cause by the logic of check link status.
>
> Signed-off-by: Michael Qiu <michael.qiu@intel.com>
> ---
> app/test-pmd/testpmd.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 61291be..e556b4c 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1315,7 +1315,7 @@ port_is_closed(portid_t port_id)
> int
> start_port(portid_t pid)
> {
> - int diag, need_check_link_status = 0;
> + int diag, need_check_link_status = -1;
> portid_t pi;
> queueid_t qi;
> struct rte_port *port;
> @@ -1337,6 +1337,7 @@ start_port(portid_t pid)
> if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
> continue;
>
> + need_check_link_status = 0;
> port = &ports[pi];
> if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
> RTE_PORT_HANDLING) == 0) {
> @@ -1457,9 +1458,9 @@ start_port(portid_t pid)
> need_check_link_status = 1;
> }
>
> - if (need_check_link_status && !no_link_check)
> + if (need_check_link_status == 1 && !no_link_check)
> check_all_ports_link_status(RTE_PORT_ALL);
> - else
> + else if (need_check_link_status == 0)
> printf("Please stop the ports first\n");
>
> printf("Done\n");
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded
2015-03-02 8:31 [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded Michael Qiu
2015-03-05 1:57 ` Qiu, Michael
@ 2015-03-06 15:03 ` De Lara Guarch, Pablo
2015-03-09 8:22 ` Thomas Monjalon
1 sibling, 1 reply; 4+ messages in thread
From: De Lara Guarch, Pablo @ 2015-03-06 15:03 UTC (permalink / raw)
To: Qiu, Michael, dev
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Michael Qiu
> Sent: Monday, March 02, 2015 8:32 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded
>
> As hotplug has been enabled, start the testpmd with no nic binded
> will show one error log "Please stop the ports first":
>
> Interactive-mode selected
> Please stop the ports first
> Done
> testpmd>
>
> This issue is cause by the logic of check link status.
>
> Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded
2015-03-06 15:03 ` De Lara Guarch, Pablo
@ 2015-03-09 8:22 ` Thomas Monjalon
0 siblings, 0 replies; 4+ messages in thread
From: Thomas Monjalon @ 2015-03-09 8:22 UTC (permalink / raw)
To: Qiu, Michael; +Cc: dev
> > As hotplug has been enabled, start the testpmd with no nic binded
> > will show one error log "Please stop the ports first":
> >
> > Interactive-mode selected
> > Please stop the ports first
> > Done
> > testpmd>
> >
> > This issue is cause by the logic of check link status.
> >
> > Signed-off-by: Michael Qiu <michael.qiu@intel.com>
>
> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-03-09 11:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-02 8:31 [dpdk-dev] [PATCH] app/test-pmd: Fix log issue without nic binded Michael Qiu
2015-03-05 1:57 ` Qiu, Michael
2015-03-06 15:03 ` De Lara Guarch, Pablo
2015-03-09 8:22 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).