* [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility @ 2020-09-16 16:44 Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 1/5] app: fix missing dependencies Bruce Richardson ` (11 more replies) 0 siblings, 12 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set. First, a problem statement: * While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4. * The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility * This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes. * There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI. What's done in this set: * Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro. * Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class. * Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file. * Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros. Open issues/considerations after this patch: * We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle. $ git grep config_flag_fmt -- drivers/*/meson.build drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' * Are we ok to remove the older macros after one release of deprecation, or do we need to wait to next API window. * I have not made any changes to the docs for this, since I expect that these macros are already covered by the doc changes in the make removal set. Reviews and comments welcome. Bruce Richardson (5): app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency meson: fix compatibility with make build defines build: add defines for compatibility with make build build: replace use of old build macros app/test-crypto-perf/meson.build | 3 + app/test-pmd/cmdline.c | 8 +- app/test-pmd/meson.build | 12 +++ app/test-pmd/parameters.c | 12 +-- app/test-pmd/testpmd.c | 24 ++--- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 3 + app/test/test_eal_flags.c | 4 +- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++ config/rte_config.h | 1 + doc/guides/rel_notes/deprecation.rst | 17 ++++ drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 ++++ examples/l2fwd-crypto/meson.build | 3 + 17 files changed, 214 insertions(+), 30 deletions(-) create mode 100644 config/rte_compatibility_defines.h -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH 1/5] app: fix missing dependencies 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson @ 2020-09-16 16:44 ` Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 2/5] examples/l2fwd-crypto: fix missing dependency Bruce Richardson ` (10 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson, stable A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build. Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 996ef1176111 ("app: add all remaining apps to meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test-crypto-perf/meson.build | 3 +++ app/test-pmd/meson.build | 12 ++++++++++++ app/test/meson.build | 3 +++ 3 files changed, 18 insertions(+) diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index f394b75ba5..4bd71510dc 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,3 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index ea56e547bb..ed7dddec7b 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -28,6 +28,18 @@ deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci'] if dpdk_conf.has('RTE_LIBRTE_PDUMP') deps += 'pdump' endif +if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') + deps += 'bitratestats' +endif +if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') + deps += 'latencystats' +endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif +if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') + deps += 'pmd_bond' +endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') deps += 'pmd_bnxt' endif diff --git a/app/test/meson.build b/app/test/meson.build index 786a213972..31e3de3724 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -344,6 +344,9 @@ endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') test_deps += 'pmd_skeleton_event' endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + test_deps += 'pmd_crypto_scheduler' +endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += 'test_telemetry_json.c' fast_tests += [['telemetry_json_autotest', true]] -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH 2/5] examples/l2fwd-crypto: fix missing dependency 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 1/5] app: fix missing dependencies Bruce Richardson @ 2020-09-16 16:44 ` Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 3/5] meson: fix compatibility with make build defines Bruce Richardson ` (9 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson, stable When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build. Fixes: 89f0711f9ddf ("examples: build some samples with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/l2fwd-crypto/meson.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 6c852ad199..39e1604fac 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,6 +7,9 @@ # DPDK instance, use 'make' deps += 'cryptodev' +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif allow_experimental_apis = true sources = files( 'main.c' -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH 3/5] meson: fix compatibility with make build defines 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 1/5] app: fix missing dependencies Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 2/5] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-09-16 16:44 ` Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 4/5] build: add defines for compatibility with make build Bruce Richardson ` (8 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson, stable The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases. As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided, and puts in a deprecation notice to allow future removal of the meson-original defines. This ensures compatibility for these macros with both meson and make from older versions. Fixes: dcadbbde8e61 ("crypto/null: build with meson") Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- doc/guides/rel_notes/deprecation.rst | 8 ++++++++ drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 +++++++++++++++ 5 files changed, 26 insertions(+), 3 deletions(-) diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 52168f7751..5b5a52fa65 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,6 +11,14 @@ here. Deprecation Notices ------------------- +* build: The macros defined to indicate which crypto drivers, event drivers + and which compression drivers have been + included in the meson build are changing format from + ``RTE_LIBRTE_<name>_PMD`` to ``RTE_LIBRTE_PMD_<name>`` to match those + macros used for the drivers in the make build. Both sets of macros + are present in this release, but those ending in ``_PMD`` will be removed + in a future release, and should not be used. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index ee883c3f9f..bea1720a0b 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,5 +8,5 @@ endif drivers = ['isal', 'octeontx', 'qat', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index a2423507ad..25b99c19cb 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,5 +26,5 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/event/meson.build b/drivers/event/meson.build index ebe76a75c4..f2a3431472 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/meson.build b/drivers/meson.build index 5f95265573..b5ac483d31 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -117,6 +117,21 @@ foreach subpath:subdirs fmt_name = name endif dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + # for driver compatibility, since we changed the + # default to match that of make. Remove in future release + # after following deprecation process + if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' + or class == 'compress' + or class == 'event') + alt_flag_fmt = '_@0@_PMD'.join( + config_flag_fmt.split('_PMD_@0@')) + if config_flag_fmt.contains('EVENTDEV') + alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( + config_flag_fmt.split('_PMD_@0@_EVENTDEV')) + endif + dpdk_conf.set(alt_flag_fmt.format( + fmt_name.to_upper()), 1) + endif lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH 4/5] build: add defines for compatibility with make build 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (2 preceding siblings ...) 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 3/5] meson: fix compatibility with make build defines Bruce Richardson @ 2020-09-16 16:44 ` Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 5/5] build: replace use of old build macros Bruce Richardson ` (7 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson, stable While meson has standardized the names and macros used for the libraries and drivers in DPDK, the old macros used from the make system were not previously announced as deprecated. Therefore to ensure compatibility of apps being rebuilt, we add these defines back in when appropriate. Fixes: 5b9656b157d3 ("lib: build with meson") Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++ config/rte_config.h | 1 + doc/guides/rel_notes/deprecation.rst | 9 ++ 4 files changed, 141 insertions(+), 1 deletion(-) create mode 100644 config/rte_compatibility_defines.h diff --git a/config/meson.build b/config/meson.build index 6996e5cbea..ef74cebaaa 100644 --- a/config/meson.build +++ b/config/meson.build @@ -245,7 +245,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers('rte_config.h', subdir: get_option('include_subdir_arch')) +install_headers(['rte_config.h', 'rte_compatibility_defines.h'], + subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS dpdk_conf.set('RTE_EAL_VFIO', is_linux) diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h new file mode 100644 index 0000000000..47600052b6 --- /dev/null +++ b/config/rte_compatibility_defines.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2017 Intel Corporation + */ + +#ifndef _RTE_CONFIG_H_ +#error "This file should only be included via rte_config.h" +#endif + +/* + * NOTE: these defines are for compatibility only and will be removed in a + * future DPDK release. + */ + +#ifdef RTE_LIBRTE_BITRATESTATS +#define RTE_LIBRTE_BITRATE +#endif + +#ifdef RTE_LIBRTE_LATENCYSTATS +#define RTE_LIBRTE_LATENCY_STATS +#endif + +#ifdef RTE_LIBRTE_DPAAX_COMMON +#define RTE_LIBRTE_COMMON_DPAAX +#endif + +#ifdef RTE_LIBRTE_VMBUS_BUS +#define RTE_LIBRTE_VMBUS +#endif + +#ifdef RTE_LIBRTE_BUCKET_MEMPOOL +#define RTE_DRIVER_MEMPOOL_BUCKET +#endif + +#ifdef RTE_LIBRTE_RING_MEMPOOL +#define RTE_DRIVER_MEMPOOL_RING +#endif + +#ifdef RTE_LIBRTE_STACK_MEMPOOL +#define RTE_DRIVER_MEMPOOL_STACK +#endif + +#ifdef RTE_LIBRTE_AF_PACKET_PMD +#define RTE_LIBRTE_PMD_AF_PACKET +#endif + +#ifdef RTE_LIBRTE_AF_XDP_PMD +#define RTE_LIBRTE_PMD_AF_XDP +#endif + +#ifdef RTE_LIBRTE_BOND_PMD +#define RTE_LIBRTE_PMD_BOND +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_EM_PMD +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_IGB_PMD +#endif + +#ifdef RTE_LIBRTE_FAILSAFE_PMD +#define RTE_LIBRTE_PMD_FAILSAFE +#endif + +#ifdef RTE_LIBRTE_KNI_PMD +#define RTE_LIBRTE_PMD_KNI +#endif + +#ifdef RTE_LIBRTE_LIQUIDIO_PMD +#define RTE_LIBRTE_LIO_PMD +#endif + +#ifdef RTE_LIBRTE_MEMIF_PMD +#define RTE_LIBRTE_PMD_MEMIF +#endif + +#ifdef RTE_LIBRTE_NULL_PMD +#define RTE_LIBRTE_PMD_NULL +#endif + +#ifdef RTE_LIBRTE_PCAP_PMD +#define RTE_LIBRTE_PMD_PCAP +#endif + +#ifdef RTE_LIBRTE_RING_PMD +#define RTE_LIBRTE_PMD_RING +#endif + +#ifdef RTE_LIBRTE_SFC_PMD +#define RTE_LIBRTE_SFC_EFX_PMD +#endif + +#ifdef RTE_LIBRTE_SOFTNIC_PMD +#define RTE_LIBRTE_PMD_SOFTNIC +#endif + +#ifdef RTE_LIBRTE_SZEDATA2_PMD +#define RTE_LIBRTE_PMD_SZEDATA2 +#endif + +#ifdef RTE_LIBRTE_TAP_PMD +#define RTE_LIBRTE_PMD_TAP +#endif + +#ifdef RTE_LIBRTE_THUNDERX_PMD +#define RTE_LIBRTE_THUNDERX_NICVF_PMD +#endif + +#ifdef RTE_LIBRTE_VHOST_PMD +#define RTE_LIBRTE_PMD_VHOST +#endif + +#ifdef RTE_LIBRTE_PMD_ARMV8 +#define RTE_LIBRTE_PMD_ARMV8_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_MVSAM +#define RTE_LIBRTE_PMD_MVSAM_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS +#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV +#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF +#endif + diff --git a/config/rte_config.h b/config/rte_config.h index 0bae630fd9..cacc1837cf 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,6 +13,7 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> +#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 5b5a52fa65..fe1b988bb8 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -19,6 +19,15 @@ Deprecation Notices are present in this release, but those ending in ``_PMD`` will be removed in a future release, and should not be used. +* build: A number of macros, which defined what DPDK components were being + built, are deprecated due to them not conforming to the standard naming + scheme for the relevant library template or driver class template. These + deprecated macros can be found in the file + ``config/rte_compatibility_defines.h``, listed in the format ``#ifdef + <NEW_DEFINE> \ #define <OLD_DEFINE> \ #endif``. When updating code, + ``OLD_DEFINE`` should be replaced with the relevant ``NEW_DEFINE`` from + that file. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH 5/5] build: replace use of old build macros 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (3 preceding siblings ...) 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 4/5] build: add defines for compatibility with make build Bruce Richardson @ 2020-09-16 16:44 ` Bruce Richardson 2020-09-17 17:59 ` [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Andrew Rybchenko ` (6 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-16 16:44 UTC (permalink / raw) To: david.marchand; +Cc: dev, Bruce Richardson Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- NOTE: this patch is not suitable for backporting, but a new patch for this issue can be done for older releases if the other patches on this set are accepted and backported. --- app/test-pmd/cmdline.c | 8 ++++---- app/test-pmd/parameters.c | 12 ++++++------ app/test-pmd/testpmd.c | 24 ++++++++++++------------ app/test-pmd/testpmd.h | 4 ++-- app/test/test_eal_flags.c | 4 ++-- 5 files changed, 26 insertions(+), 26 deletions(-) diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 0a6ed85f33..9ca052a1b9 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -50,7 +50,7 @@ #include <cmdline_parse_etheraddr.h> #include <cmdline_socket.h> #include <cmdline.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_LIBRTE_BOND_PMD #include <rte_eth_bond.h> #include <rte_eth_bond_8023ad.h> #endif @@ -597,7 +597,7 @@ static void cmd_help_long_parsed(void *parsed_result, " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_LIBRTE_BOND_PMD "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -5732,7 +5732,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = { }, }; -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_LIBRTE_BOND_PMD /* *** SET BONDING MODE *** */ struct cmd_set_bonding_mode_result { cmdline_fixed_string_t set; @@ -19430,7 +19430,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_LIBRTE_BOND_PMD (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, (cmdline_parse_inst_t *) &cmd_set_bonding_primary, diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 7cb0e3d6ec..4f6f6a34f1 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -39,7 +39,7 @@ #include <rte_ether.h> #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_LIBRTE_BOND_PMD #include <rte_eth_bond.h> #endif #include <rte_flow.h> @@ -128,7 +128,7 @@ usage(char* progname) "the packet will be enqueued into the rx drop-queue. " "If the drop-queue doesn't exist, the packet is dropped. " "By default drop-queue=127.\n"); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS printf(" --latencystats=N: enable latency and jitter statistcs " "monitoring on forwarding lcore id N.\n"); #endif @@ -610,10 +610,10 @@ launch_args_parse(int argc, char** argv) { "pkt-filter-report-hash", 1, 0, 0 }, { "pkt-filter-size", 1, 0, 0 }, { "pkt-filter-drop-queue", 1, 0, 0 }, -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS { "latencystats", 1, 0, 0 }, #endif -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS { "bitrate-stats", 1, 0, 0 }, #endif { "disable-crc-strip", 0, 0, 0 }, @@ -973,7 +973,7 @@ launch_args_parse(int argc, char** argv) "drop queue %d invalid - must" "be >= 0 \n", n); } -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS if (!strcmp(lgopts[opt_idx].name, "latencystats")) { n = atoi(optarg); @@ -986,7 +986,7 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) { n = atoi(optarg); if (n >= 0) { diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 7842c3b781..68a6c979b6 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -54,10 +54,10 @@ #endif #include <rte_flow.h> #include <rte_metrics.h> -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS #include <rte_bitrate.h> #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS #include <rte_latencystats.h> #endif @@ -410,7 +410,7 @@ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS /* * Set when latency stats is enabled in the commandline @@ -478,7 +478,7 @@ uint8_t xstats_hide_zero; unsigned int num_sockets = 0; unsigned int socket_ids[RTE_MAX_NUMA_NODES]; -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS /* Bitrate statistics */ struct rte_stats_bitrates *bitrate_data; lcoreid_t bitrate_lcore_id; @@ -2063,7 +2063,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; @@ -2078,7 +2078,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS if (bitrate_enabled != 0 && bitrate_lcore_id == rte_lcore_id()) { tics_current = rte_rdtsc(); @@ -2091,7 +2091,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) } } #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS if (latencystats_enabled != 0 && latencystats_lcore_id == rte_lcore_id()) rte_latencystats_update(); @@ -3641,7 +3641,7 @@ signal_handler(int signum) /* uninitialize packet capture framework */ rte_pdump_uninit(); #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif @@ -3706,10 +3706,10 @@ main(int argc, char** argv) "Check the core mask argument\n"); /* Bitrate/latency stats disabled by default */ -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS bitrate_enabled = 0; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS latencystats_enabled = 0; #endif @@ -3788,7 +3788,7 @@ main(int argc, char** argv) /* Init metrics library */ rte_metrics_init(rte_socket_id()); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS if (latencystats_enabled != 0) { int ret = rte_latencystats_init(1, NULL); if (ret) @@ -3800,7 +3800,7 @@ main(int argc, char** argv) #endif /* Setup bitrate stats */ -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS if (bitrate_enabled != 0) { bitrate_data = rte_stats_bitrate_create(); if (bitrate_data == NULL) diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 25a12b14f2..54d616ca75 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -402,12 +402,12 @@ extern uint32_t param_total_num_mbufs; extern uint16_t stats_period; -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIBRTE_LATENCYSTATS extern uint8_t latencystats_enabled; extern lcoreid_t latencystats_lcore_id; #endif -#ifdef RTE_LIBRTE_BITRATE +#ifdef RTE_LIBRTE_BITRATESTATS extern lcoreid_t bitrate_lcore_id; extern uint8_t bitrate_enabled; #endif diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c index b019656b29..867b91bc24 100644 --- a/app/test/test_eal_flags.c +++ b/app/test/test_eal_flags.c @@ -344,7 +344,7 @@ test_invalid_b_flag(void) static int test_invalid_vdev_flag(void) { -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_LIBRTE_RING_PMD #ifdef RTE_EXEC_ENV_FREEBSD /* BSD target doesn't support prefixes at this point, and we also need to * run another primary process here */ @@ -1504,7 +1504,7 @@ test_eal_flags(void) return ret; } -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_LIBRTE_RING_PMD ret = test_invalid_vdev_flag(); if (ret < 0) { printf("Error in test_invalid_vdev_flag()\n"); -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (4 preceding siblings ...) 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 5/5] build: replace use of old build macros Bruce Richardson @ 2020-09-17 17:59 ` Andrew Rybchenko 2020-09-18 8:41 ` Bruce Richardson 2020-09-18 15:12 ` David Marchand ` (5 subsequent siblings) 11 siblings, 1 reply; 82+ messages in thread From: Andrew Rybchenko @ 2020-09-17 17:59 UTC (permalink / raw) To: Bruce Richardson, david.marchand; +Cc: dev On 9/16/20 7:44 PM, Bruce Richardson wrote: > As flagged previously on-list, there are a number of macros used to specify > what libs and drivers are enabled in the build which differ from the > equivalents used with make. This patchset is one possible approach to > fixing these, but as part of the investigation some issues were hit where > I'd like additional input to ensure we are ok with the approach taken in > this set. > > First, a problem statement: > > * While the make build defines generally followed a pattern, there were > many instances where the defines were unique. These can be seen in the > values defined in patch 4. > > * The NIC PMDs had two separate standards for the defines - some (the > physical device drivers) tended to have the _PMD at the end of the > macros, while the virtual drivers had it in the middle. Since the > majority seemed to go with it at the end, meson chose this option. > However, as can be seen from patch 4, a number now need special handling > for compatibility > > * This "_PMD" at the end made its way into other device classes, such as > crypto and event, but it appears that the standard for these classes from > make is in fact the opposite. Therefore we have had for the last 2+ years > conflicting macros for crypto, compression and event classes. > > * There is also the question of how important compatibility for these > macros is, especially since we have had numerous incompatibilities > without it being reported before. There is also the issue of the > deprecation process for macros, since these are not part of any ABI. > > What's done in this set: > > * Firstly, and missing dependencies on apps or examples had to be fixed, > where a dependency was missed because it was never needed due to the code > being stripped out because of a missing macro. > > * Secondly, since it is likely that use of the defines from make is more > widespread than those from meson, the defines for the crypto, compression > and event classes are changed to align with the make values. Just in case > though, temporary code is added to drivers/meson.build to redefine the > old meson values too, and a deprecation notice is added for these. The > hope is that we can then remove this temporary code in the next release, > leaving us with just one macro style for each driver class. > > * Thirdly, we add an additional set of backward compatibility macros for > the ~30 special-cases, where the meson macro template does not match that > defined for make. Again, this is intended to be temporary and a > deprecation notice is given for the macros in that file. > > * Finally, we replace all instances of the old macros in the codebase with > the newer versions. While the work done in the first four patches (steps > 1-3 above) should be ok to backport, this final patch is not suitable for > backporting. However, it is relatively simple to produce a new patch for > backporting which allow either old or new values to be used in macros. > > > Open issues/considerations after this patch: > > * We still have inconsistencies in our driver macro and naming templates. > This is just a nice-to-have, but if people are ok with generally having a > breakage in our macro defines, we could clean this up a lot further. > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most > others have it before the name. Notice also that many device classes have > the class at the end of the template, while bbdev has it in the middle. > $ git grep config_flag_fmt -- drivers/*/meson.build > drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' > drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' > drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' As a generic direction I would vote for standard names which are based on directory structure: - RTE_LIBRTE_ETHDEV - RTE_DRIVER_NET_SFC - RTE_DRIVER_COMMON_MLX5 - RTE_DRIVER_BUS_PCI > * Are we ok to remove the older macros after one release of deprecation, or > do we need to wait to next API window. > > * I have not made any changes to the docs for this, since I expect that > these macros are already covered by the doc changes in the make removal > set. > > Reviews and comments welcome. > > Bruce Richardson (5): > app: fix missing dependencies > examples/l2fwd-crypto: fix missing dependency > meson: fix compatibility with make build defines > build: add defines for compatibility with make build > build: replace use of old build macros > > app/test-crypto-perf/meson.build | 3 + > app/test-pmd/cmdline.c | 8 +- > app/test-pmd/meson.build | 12 +++ > app/test-pmd/parameters.c | 12 +-- > app/test-pmd/testpmd.c | 24 ++--- > app/test-pmd/testpmd.h | 4 +- > app/test/meson.build | 3 + > app/test/test_eal_flags.c | 4 +- > config/meson.build | 3 +- > config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++ > config/rte_config.h | 1 + > doc/guides/rel_notes/deprecation.rst | 17 ++++ > drivers/compress/meson.build | 2 +- > drivers/crypto/meson.build | 2 +- > drivers/event/meson.build | 2 +- > drivers/meson.build | 15 ++++ > examples/l2fwd-crypto/meson.build | 3 + > 17 files changed, 214 insertions(+), 30 deletions(-) > create mode 100644 config/rte_compatibility_defines.h > ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-17 17:59 ` [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Andrew Rybchenko @ 2020-09-18 8:41 ` Bruce Richardson 2020-09-18 8:59 ` Andrew Rybchenko 2020-09-23 12:46 ` Thomas Monjalon 0 siblings, 2 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-18 8:41 UTC (permalink / raw) To: Andrew Rybchenko; +Cc: david.marchand, dev On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: > On 9/16/20 7:44 PM, Bruce Richardson wrote: > > As flagged previously on-list, there are a number of macros used to specify > > what libs and drivers are enabled in the build which differ from the > > equivalents used with make. This patchset is one possible approach to > > fixing these, but as part of the investigation some issues were hit where > > I'd like additional input to ensure we are ok with the approach taken in > > this set. > > > > First, a problem statement: > > > > * While the make build defines generally followed a pattern, there were > > many instances where the defines were unique. These can be seen in the > > values defined in patch 4. > > > > * The NIC PMDs had two separate standards for the defines - some (the > > physical device drivers) tended to have the _PMD at the end of the > > macros, while the virtual drivers had it in the middle. Since the > > majority seemed to go with it at the end, meson chose this option. > > However, as can be seen from patch 4, a number now need special handling > > for compatibility > > > > * This "_PMD" at the end made its way into other device classes, such as > > crypto and event, but it appears that the standard for these classes from > > make is in fact the opposite. Therefore we have had for the last 2+ years > > conflicting macros for crypto, compression and event classes. > > > > * There is also the question of how important compatibility for these > > macros is, especially since we have had numerous incompatibilities > > without it being reported before. There is also the issue of the > > deprecation process for macros, since these are not part of any ABI. > > > > What's done in this set: > > > > * Firstly, and missing dependencies on apps or examples had to be fixed, > > where a dependency was missed because it was never needed due to the code > > being stripped out because of a missing macro. > > > > * Secondly, since it is likely that use of the defines from make is more > > widespread than those from meson, the defines for the crypto, compression > > and event classes are changed to align with the make values. Just in case > > though, temporary code is added to drivers/meson.build to redefine the > > old meson values too, and a deprecation notice is added for these. The > > hope is that we can then remove this temporary code in the next release, > > leaving us with just one macro style for each driver class. > > > > * Thirdly, we add an additional set of backward compatibility macros for > > the ~30 special-cases, where the meson macro template does not match that > > defined for make. Again, this is intended to be temporary and a > > deprecation notice is given for the macros in that file. > > > > * Finally, we replace all instances of the old macros in the codebase with > > the newer versions. While the work done in the first four patches (steps > > 1-3 above) should be ok to backport, this final patch is not suitable for > > backporting. However, it is relatively simple to produce a new patch for > > backporting which allow either old or new values to be used in macros. > > > > > > Open issues/considerations after this patch: > > > > * We still have inconsistencies in our driver macro and naming templates. > > This is just a nice-to-have, but if people are ok with generally having a > > breakage in our macro defines, we could clean this up a lot further. > > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most > > others have it before the name. Notice also that many device classes have > > the class at the end of the template, while bbdev has it in the middle. > > $ git grep config_flag_fmt -- drivers/*/meson.build > > drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' > > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > > drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' > > drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > > drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > > drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > > drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' > > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' > > drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > As a generic direction I would vote for standard names which are > based on directory structure: > - RTE_LIBRTE_ETHDEV > - RTE_DRIVER_NET_SFC > - RTE_DRIVER_COMMON_MLX5 > - RTE_DRIVER_BUS_PCI > Definite +1, and it would be good if we standardized the .so names like that too. The open question is how much backward compatibility needs to be maintained for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-18 8:41 ` Bruce Richardson @ 2020-09-18 8:59 ` Andrew Rybchenko 2020-09-18 12:19 ` Ferruh Yigit 2020-09-23 12:46 ` Thomas Monjalon 1 sibling, 1 reply; 82+ messages in thread From: Andrew Rybchenko @ 2020-09-18 8:59 UTC (permalink / raw) To: Bruce Richardson; +Cc: david.marchand, dev On 9/18/20 11:41 AM, Bruce Richardson wrote: > On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: >> On 9/16/20 7:44 PM, Bruce Richardson wrote: >>> As flagged previously on-list, there are a number of macros used to specify >>> what libs and drivers are enabled in the build which differ from the >>> equivalents used with make. This patchset is one possible approach to >>> fixing these, but as part of the investigation some issues were hit where >>> I'd like additional input to ensure we are ok with the approach taken in >>> this set. >>> >>> First, a problem statement: >>> >>> * While the make build defines generally followed a pattern, there were >>> many instances where the defines were unique. These can be seen in the >>> values defined in patch 4. >>> >>> * The NIC PMDs had two separate standards for the defines - some (the >>> physical device drivers) tended to have the _PMD at the end of the >>> macros, while the virtual drivers had it in the middle. Since the >>> majority seemed to go with it at the end, meson chose this option. >>> However, as can be seen from patch 4, a number now need special handling >>> for compatibility >>> >>> * This "_PMD" at the end made its way into other device classes, such as >>> crypto and event, but it appears that the standard for these classes from >>> make is in fact the opposite. Therefore we have had for the last 2+ years >>> conflicting macros for crypto, compression and event classes. >>> >>> * There is also the question of how important compatibility for these >>> macros is, especially since we have had numerous incompatibilities >>> without it being reported before. There is also the issue of the >>> deprecation process for macros, since these are not part of any ABI. >>> >>> What's done in this set: >>> >>> * Firstly, and missing dependencies on apps or examples had to be fixed, >>> where a dependency was missed because it was never needed due to the code >>> being stripped out because of a missing macro. >>> >>> * Secondly, since it is likely that use of the defines from make is more >>> widespread than those from meson, the defines for the crypto, compression >>> and event classes are changed to align with the make values. Just in case >>> though, temporary code is added to drivers/meson.build to redefine the >>> old meson values too, and a deprecation notice is added for these. The >>> hope is that we can then remove this temporary code in the next release, >>> leaving us with just one macro style for each driver class. >>> >>> * Thirdly, we add an additional set of backward compatibility macros for >>> the ~30 special-cases, where the meson macro template does not match that >>> defined for make. Again, this is intended to be temporary and a >>> deprecation notice is given for the macros in that file. >>> >>> * Finally, we replace all instances of the old macros in the codebase with >>> the newer versions. While the work done in the first four patches (steps >>> 1-3 above) should be ok to backport, this final patch is not suitable for >>> backporting. However, it is relatively simple to produce a new patch for >>> backporting which allow either old or new values to be used in macros. >>> >>> >>> Open issues/considerations after this patch: >>> >>> * We still have inconsistencies in our driver macro and naming templates. >>> This is just a nice-to-have, but if people are ok with generally having a >>> breakage in our macro defines, we could clean this up a lot further. >>> Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most >>> others have it before the name. Notice also that many device classes have >>> the class at the end of the template, while bbdev has it in the middle. >>> $ git grep config_flag_fmt -- drivers/*/meson.build >>> drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' >>> drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' >>> drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' >>> drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' >>> drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' >>> drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' >>> drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' >>> drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >>> drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' >>> drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >>> drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >> >> As a generic direction I would vote for standard names which are >> based on directory structure: >> - RTE_LIBRTE_ETHDEV >> - RTE_DRIVER_NET_SFC >> - RTE_DRIVER_COMMON_MLX5 >> - RTE_DRIVER_BUS_PCI >> > > Definite +1, and it would be good if we standardized the .so names like > that too. > > The open question is how much backward compatibility needs to be maintained > for macros (and also too for .so names)? With this patchset, I've aimed > very much to keep strict compatibility for now. I think it is really good. Technically it does not look hard to provide backward compatibility for macros, so I'd keep it up to but not including 21.11 (next LTS?). Same for .so names, if it is not a problem. If we approve the decision on naming, all new entities must follow it from the very beginning. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-18 8:59 ` Andrew Rybchenko @ 2020-09-18 12:19 ` Ferruh Yigit 0 siblings, 0 replies; 82+ messages in thread From: Ferruh Yigit @ 2020-09-18 12:19 UTC (permalink / raw) To: Andrew Rybchenko, Bruce Richardson; +Cc: david.marchand, dev On 9/18/2020 9:59 AM, Andrew Rybchenko wrote: > On 9/18/20 11:41 AM, Bruce Richardson wrote: >> On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: >>> On 9/16/20 7:44 PM, Bruce Richardson wrote: >>>> As flagged previously on-list, there are a number of macros used to specify >>>> what libs and drivers are enabled in the build which differ from the >>>> equivalents used with make. This patchset is one possible approach to >>>> fixing these, but as part of the investigation some issues were hit where >>>> I'd like additional input to ensure we are ok with the approach taken in >>>> this set. >>>> >>>> First, a problem statement: >>>> >>>> * While the make build defines generally followed a pattern, there were >>>> many instances where the defines were unique. These can be seen in the >>>> values defined in patch 4. >>>> >>>> * The NIC PMDs had two separate standards for the defines - some (the >>>> physical device drivers) tended to have the _PMD at the end of the >>>> macros, while the virtual drivers had it in the middle. Since the >>>> majority seemed to go with it at the end, meson chose this option. >>>> However, as can be seen from patch 4, a number now need special handling >>>> for compatibility >>>> >>>> * This "_PMD" at the end made its way into other device classes, such as >>>> crypto and event, but it appears that the standard for these classes from >>>> make is in fact the opposite. Therefore we have had for the last 2+ years >>>> conflicting macros for crypto, compression and event classes. >>>> >>>> * There is also the question of how important compatibility for these >>>> macros is, especially since we have had numerous incompatibilities >>>> without it being reported before. There is also the issue of the >>>> deprecation process for macros, since these are not part of any ABI. >>>> >>>> What's done in this set: >>>> >>>> * Firstly, and missing dependencies on apps or examples had to be fixed, >>>> where a dependency was missed because it was never needed due to the code >>>> being stripped out because of a missing macro. >>>> >>>> * Secondly, since it is likely that use of the defines from make is more >>>> widespread than those from meson, the defines for the crypto, compression >>>> and event classes are changed to align with the make values. Just in case >>>> though, temporary code is added to drivers/meson.build to redefine the >>>> old meson values too, and a deprecation notice is added for these. The >>>> hope is that we can then remove this temporary code in the next release, >>>> leaving us with just one macro style for each driver class. >>>> >>>> * Thirdly, we add an additional set of backward compatibility macros for >>>> the ~30 special-cases, where the meson macro template does not match that >>>> defined for make. Again, this is intended to be temporary and a >>>> deprecation notice is given for the macros in that file. >>>> >>>> * Finally, we replace all instances of the old macros in the codebase with >>>> the newer versions. While the work done in the first four patches (steps >>>> 1-3 above) should be ok to backport, this final patch is not suitable for >>>> backporting. However, it is relatively simple to produce a new patch for >>>> backporting which allow either old or new values to be used in macros. >>>> >>>> >>>> Open issues/considerations after this patch: >>>> >>>> * We still have inconsistencies in our driver macro and naming templates. >>>> This is just a nice-to-have, but if people are ok with generally having a >>>> breakage in our macro defines, we could clean this up a lot further. >>>> Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most >>>> others have it before the name. Notice also that many device classes have >>>> the class at the end of the template, while bbdev has it in the middle. >>>> $ git grep config_flag_fmt -- drivers/*/meson.build >>>> drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' >>>> drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' >>>> drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' >>>> drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' >>>> drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' >>>> drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' >>>> drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' >>>> drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >>>> drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' >>>> drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >>>> drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' >>> >>> As a generic direction I would vote for standard names which are >>> based on directory structure: >>> - RTE_LIBRTE_ETHDEV >>> - RTE_DRIVER_NET_SFC >>> - RTE_DRIVER_COMMON_MLX5 >>> - RTE_DRIVER_BUS_PCI >>> >> >> Definite +1, and it would be good if we standardized the .so names like >> that too. >> >> The open question is how much backward compatibility needs to be maintained >> for macros (and also too for .so names)? With this patchset, I've aimed >> very much to keep strict compatibility for now. > > I think it is really good. Technically it does not look hard to > provide backward compatibility for macros, so I'd keep it up to > but not including 21.11 (next LTS?). Same for .so names, if it > is not a problem. > > If we approve the decision on naming, all new entities must > follow it from the very beginning. > +1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-18 8:41 ` Bruce Richardson 2020-09-18 8:59 ` Andrew Rybchenko @ 2020-09-23 12:46 ` Thomas Monjalon 2020-09-30 16:49 ` Richardson, Bruce 1 sibling, 1 reply; 82+ messages in thread From: Thomas Monjalon @ 2020-09-23 12:46 UTC (permalink / raw) To: Bruce Richardson; +Cc: Andrew Rybchenko, david.marchand, dev, ferruh.yigit 18/09/2020 10:41, Bruce Richardson: > On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: > > On 9/16/20 7:44 PM, Bruce Richardson wrote: > > > * We still have inconsistencies in our driver macro and naming templates. > > > This is just a nice-to-have, but if people are ok with generally having a > > > breakage in our macro defines, we could clean this up a lot further. > > > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most > > > others have it before the name. Notice also that many device classes have > > > the class at the end of the template, while bbdev has it in the middle. > > > $ git grep config_flag_fmt -- drivers/*/meson.build > > > drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' > > > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > > > drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' > > > drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > > > drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > > > drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > > > drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' > > > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > > drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' > > > drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > > drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > > > As a generic direction I would vote for standard names which are > > based on directory structure: > > - RTE_LIBRTE_ETHDEV > > - RTE_DRIVER_NET_SFC > > - RTE_DRIVER_COMMON_MLX5 > > - RTE_DRIVER_BUS_PCI I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). If we plan to rework all flags, I would even prefer - DPDK_LIB_ETHDEV - DPDK_DRIVER_BUS_PCI > Definite +1, and it would be good if we standardized the .so names like > that too. +1 to align .so names for clarity. > The open question is how much backward compatibility needs to be maintained > for macros (and also too for .so names)? With this patchset, I've aimed > very much to keep strict compatibility for now. As David said, the compatibility is mostly for apps using driver-specific API. We could also consider that the compatibility break was announced as part of the makefile removal. In any case, it is not ABI sensitive, so no need to wait 21.11. If choosing between a compilation flag breakage in 21.02 or 20.11, I would prefer 20.11 where legacy build system is removed. About LTS, we may want to have some patches targetted to 18.11 and 19.11, to allow a transparent switch between make and meson. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-23 12:46 ` Thomas Monjalon @ 2020-09-30 16:49 ` Richardson, Bruce 2020-09-30 17:31 ` Thomas Monjalon 0 siblings, 1 reply; 82+ messages in thread From: Richardson, Bruce @ 2020-09-30 16:49 UTC (permalink / raw) To: Thomas Monjalon; +Cc: Andrew Rybchenko, david.marchand, dev, Yigit, Ferruh > -----Original Message----- > From: Thomas Monjalon <thomas@monjalon.net> > Sent: Wednesday, September 23, 2020 1:46 PM > To: Richardson, Bruce <bruce.richardson@intel.com> > Cc: Andrew Rybchenko <arybchenko@solarflare.com>; > david.marchand@redhat.com; dev@dpdk.org; Yigit, Ferruh > <ferruh.yigit@intel.com> > Subject: Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for > compatibility > > 18/09/2020 10:41, Bruce Richardson: > > On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: > > > On 9/16/20 7:44 PM, Bruce Richardson wrote: > > > > * We still have inconsistencies in our driver macro and naming > templates. > > > > This is just a nice-to-have, but if people are ok with generally > having a > > > > breakage in our macro defines, we could clean this up a lot > further. > > > > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, > while most > > > > others have it before the name. Notice also that many device > classes have > > > > the class at the end of the template, while bbdev has it in the > middle. > > > > $ git grep config_flag_fmt -- drivers/*/meson.build > > > > drivers/baseband/meson.build:config_flag_fmt = > 'RTE_LIBRTE_PMD_BBDEV_@0@' > > > > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > > > > drivers/common/meson.build:config_flag_fmt = > 'RTE_LIBRTE_@0@_COMMON' > > > > drivers/compress/meson.build:config_flag_fmt = > 'RTE_LIBRTE_PMD_@0@' > > > > drivers/crypto/meson.build:config_flag_fmt = > 'RTE_LIBRTE_PMD_@0@' > > > > drivers/event/meson.build:config_flag_fmt = > 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > > > > drivers/mempool/meson.build:config_flag_fmt = > 'RTE_LIBRTE_@0@_MEMPOOL' > > > > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > > > drivers/raw/meson.build:config_flag_fmt = > 'RTE_LIBRTE_PMD_@0@_RAWDEV' > > > > drivers/regex/meson.build:config_flag_fmt = > 'RTE_LIBRTE_@0@_PMD' > > > > drivers/vdpa/meson.build:config_flag_fmt = > 'RTE_LIBRTE_@0@_PMD' > > > > > > As a generic direction I would vote for standard names which are > > > based on directory structure: > > > - RTE_LIBRTE_ETHDEV > > > - RTE_DRIVER_NET_SFC > > > - RTE_DRIVER_COMMON_MLX5 > > > - RTE_DRIVER_BUS_PCI > > I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). > If we plan to rework all flags, I would even prefer > - DPDK_LIB_ETHDEV > - DPDK_DRIVER_BUS_PCI Since everything else in DPDK uses an RTE prefix, I think it might be sensible to keep that here too: * RTE_LIB_ETHDEV * RTE_PMD_BUS_PCI * RTE_PMD_NET_IXGBE * RTE_PMD_CRYPTO_KASUMI etc. > > Definite +1, and it would be good if we standardized the .so names like > > that too. > > +1 to align .so names for clarity. > I'd really like this, but need to see the implications for any drivers which may be multi-function, like QAT which has a single .so file. > > The open question is how much backward compatibility needs to be > maintained > > for macros (and also too for .so names)? With this patchset, I've aimed > > very much to keep strict compatibility for now. > > As David said, the compatibility is mostly for apps using driver-specific > API. > We could also consider that the compatibility break was announced > as part of the makefile removal. > In any case, it is not ABI sensitive, so no need to wait 21.11. > If choosing between a compilation flag breakage in 21.02 or 20.11, > I would prefer 20.11 where legacy build system is removed. > > About LTS, we may want to have some patches targetted to 18.11 and 19.11, > to allow a transparent switch between make and meson. > Any more thoughts on this? Any change to standardize the library names is going to have to be done in 20.11 if it's to be done at all, since that would be an ABI break. I'd tend towards only changing the defines for 21.02, but if lots of other things are changing too, perhaps it's not worthwhile waiting. /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-30 16:49 ` Richardson, Bruce @ 2020-09-30 17:31 ` Thomas Monjalon 0 siblings, 0 replies; 82+ messages in thread From: Thomas Monjalon @ 2020-09-30 17:31 UTC (permalink / raw) To: Richardson, Bruce; +Cc: Andrew Rybchenko, david.marchand, dev, Yigit, Ferruh 30/09/2020 18:49, Richardson, Bruce: > From: Thomas Monjalon <thomas@monjalon.net> > > 18/09/2020 10:41, Bruce Richardson: > > > On Thu, Sep 17, 2020 at 08:59:26PM +0300, Andrew Rybchenko wrote: > > > > On 9/16/20 7:44 PM, Bruce Richardson wrote: > > > > > * We still have inconsistencies in our driver macro and naming > > templates. > > > > > This is just a nice-to-have, but if people are ok with generally > > having a > > > > > breakage in our macro defines, we could clean this up a lot > > further. > > > > > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, > > while most > > > > > others have it before the name. Notice also that many device > > classes have > > > > > the class at the end of the template, while bbdev has it in the > > middle. > > > > > $ git grep config_flag_fmt -- drivers/*/meson.build > > > > > drivers/baseband/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_PMD_BBDEV_@0@' > > > > > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > > > > > drivers/common/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_@0@_COMMON' > > > > > drivers/compress/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_PMD_@0@' > > > > > drivers/crypto/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_PMD_@0@' > > > > > drivers/event/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > > > > > drivers/mempool/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_@0@_MEMPOOL' > > > > > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > > > > drivers/raw/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_PMD_@0@_RAWDEV' > > > > > drivers/regex/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_@0@_PMD' > > > > > drivers/vdpa/meson.build:config_flag_fmt = > > 'RTE_LIBRTE_@0@_PMD' > > > > > > > > As a generic direction I would vote for standard names which are > > > > based on directory structure: > > > > - RTE_LIBRTE_ETHDEV > > > > - RTE_DRIVER_NET_SFC > > > > - RTE_DRIVER_COMMON_MLX5 > > > > - RTE_DRIVER_BUS_PCI > > > > I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). > > If we plan to rework all flags, I would even prefer > > - DPDK_LIB_ETHDEV > > - DPDK_DRIVER_BUS_PCI > > Since everything else in DPDK uses an RTE prefix, Not everything. The applications and scripts are prefixed with dpdk- > I think it might be sensible to keep that here too: > > * RTE_LIB_ETHDEV > * RTE_PMD_BUS_PCI PMD before BUS looks weird. > * RTE_PMD_NET_IXGBE > * RTE_PMD_CRYPTO_KASUMI > etc. > > > > Definite +1, and it would be good if we standardized the .so names like > > > that too. > > > > +1 to align .so names for clarity. > > > I'd really like this, but need to see the implications for any drivers which may be multi-function, like QAT which has a single .so file. > > > > The open question is how much backward compatibility needs to be > > maintained > > > for macros (and also too for .so names)? With this patchset, I've aimed > > > very much to keep strict compatibility for now. > > > > As David said, the compatibility is mostly for apps using driver-specific > > API. > > We could also consider that the compatibility break was announced > > as part of the makefile removal. > > In any case, it is not ABI sensitive, so no need to wait 21.11. > > If choosing between a compilation flag breakage in 21.02 or 20.11, > > I would prefer 20.11 where legacy build system is removed. > > > > About LTS, we may want to have some patches targetted to 18.11 and 19.11, > > to allow a transparent switch between make and meson. > > > > Any more thoughts on this? > Any change to standardize the library names is going to have to be done in 20.11 if it's to be done at all, since that would be an ABI break. I'd tend towards only changing the defines for 21.02, but if lots of other things are changing too, perhaps it's not worthwhile waiting. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (5 preceding siblings ...) 2020-09-17 17:59 ` [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Andrew Rybchenko @ 2020-09-18 15:12 ` David Marchand 2020-09-30 16:12 ` Ferruh Yigit ` (4 subsequent siblings) 11 siblings, 0 replies; 82+ messages in thread From: David Marchand @ 2020-09-18 15:12 UTC (permalink / raw) To: Bruce Richardson Cc: dev, Andrew Rybchenko, Yigit, Ferruh, Thomas Monjalon, Ray Kinsella On Wed, Sep 16, 2020 at 6:44 PM Bruce Richardson <bruce.richardson@intel.com> wrote: > > As flagged previously on-list, there are a number of macros used to specify > what libs and drivers are enabled in the build which differ from the > equivalents used with make. This patchset is one possible approach to > fixing these, but as part of the investigation some issues were hit where > I'd like additional input to ensure we are ok with the approach taken in > this set. > > First, a problem statement: > > * While the make build defines generally followed a pattern, there were > many instances where the defines were unique. These can be seen in the > values defined in patch 4. > > * The NIC PMDs had two separate standards for the defines - some (the > physical device drivers) tended to have the _PMD at the end of the > macros, while the virtual drivers had it in the middle. Since the > majority seemed to go with it at the end, meson chose this option. > However, as can be seen from patch 4, a number now need special handling > for compatibility > > * This "_PMD" at the end made its way into other device classes, such as > crypto and event, but it appears that the standard for these classes from > make is in fact the opposite. Therefore we have had for the last 2+ years > conflicting macros for crypto, compression and event classes. > > * There is also the question of how important compatibility for these > macros is, especially since we have had numerous incompatibilities > without it being reported before. There is also the issue of the > deprecation process for macros, since these are not part of any ABI. The main use I can think of for an application is controlling calls to specific drivers API. This is how we caught this issue, with testpmd silently dropping code/feature. My impression is that people are only starting building with meson now they are forced to: even DTS only recently started building with it. This is why I don't think the absence of complaints is a good indicator. > > What's done in this set: > > * Firstly, and missing dependencies on apps or examples had to be fixed, > where a dependency was missed because it was never needed due to the code > being stripped out because of a missing macro. > > * Secondly, since it is likely that use of the defines from make is more > widespread than those from meson, the defines for the crypto, compression > and event classes are changed to align with the make values. Just in case > though, temporary code is added to drivers/meson.build to redefine the > old meson values too, and a deprecation notice is added for these. The > hope is that we can then remove this temporary code in the next release, > leaving us with just one macro style for each driver class. > > * Thirdly, we add an additional set of backward compatibility macros for > the ~30 special-cases, where the meson macro template does not match that > defined for make. Again, this is intended to be temporary and a > deprecation notice is given for the macros in that file. > > * Finally, we replace all instances of the old macros in the codebase with > the newer versions. While the work done in the first four patches (steps > 1-3 above) should be ok to backport, this final patch is not suitable for > backporting. However, it is relatively simple to produce a new patch for > backporting which allow either old or new values to be used in macros. The series looks good to me. Thanks for coming with this quickly. > Open issues/considerations after this patch: > > * We still have inconsistencies in our driver macro and naming templates. > This is just a nice-to-have, but if people are ok with generally having a > breakage in our macro defines, we could clean this up a lot further. > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most > others have it before the name. Notice also that many device classes have > the class at the end of the template, while bbdev has it in the middle. > $ git grep config_flag_fmt -- drivers/*/meson.build > drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' > drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' > drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' I can see the meson implementation kept a part of the chaotic aspect of the make implementation ;-). I like Andrew proposal. +1 even if this is "nice to have". Cleaning the .so names is nice too, and I don't see an impact for applications now that we provide a pkgconfig file. > > * Are we ok to remove the older macros after one release of deprecation, or > do we need to wait to next API window. Waiting for one release or more won't make a difference for people who only upgrade with LTS. If we go with the change, I'd rather drop the API compatibility in the next release 21.02, as this is an "easy" thing to fix for applications that recompile with intermediate releases. -- David Marchand ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (6 preceding siblings ...) 2020-09-18 15:12 ` David Marchand @ 2020-09-30 16:12 ` Ferruh Yigit 2020-09-30 16:19 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (3 subsequent siblings) 11 siblings, 1 reply; 82+ messages in thread From: Ferruh Yigit @ 2020-09-30 16:12 UTC (permalink / raw) To: Bruce Richardson, david.marchand; +Cc: dev On 9/16/2020 5:44 PM, Bruce Richardson wrote: > As flagged previously on-list, there are a number of macros used to specify > what libs and drivers are enabled in the build which differ from the > equivalents used with make. This patchset is one possible approach to > fixing these, but as part of the investigation some issues were hit where > I'd like additional input to ensure we are ok with the approach taken in > this set. > > First, a problem statement: > > * While the make build defines generally followed a pattern, there were > many instances where the defines were unique. These can be seen in the > values defined in patch 4. > > * The NIC PMDs had two separate standards for the defines - some (the > physical device drivers) tended to have the _PMD at the end of the > macros, while the virtual drivers had it in the middle. Since the > majority seemed to go with it at the end, meson chose this option. > However, as can be seen from patch 4, a number now need special handling > for compatibility +1 to all X_PMD macros. > > * This "_PMD" at the end made its way into other device classes, such as > crypto and event, but it appears that the standard for these classes from > make is in fact the opposite. Therefore we have had for the last 2+ years > conflicting macros for crypto, compression and event classes. > > * There is also the question of how important compatibility for these > macros is, especially since we have had numerous incompatibilities > without it being reported before. There is also the issue of the > deprecation process for macros, since these are not part of any ABI. > > What's done in this set: > > * Firstly, and missing dependencies on apps or examples had to be fixed, > where a dependency was missed because it was never needed due to the code > being stripped out because of a missing macro. > > * Secondly, since it is likely that use of the defines from make is more > widespread than those from meson, the defines for the crypto, compression > and event classes are changed to align with the make values. Just in case > though, temporary code is added to drivers/meson.build to redefine the > old meson values too, and a deprecation notice is added for these. The > hope is that we can then remove this temporary code in the next release, > leaving us with just one macro style for each driver class. > > * Thirdly, we add an additional set of backward compatibility macros for > the ~30 special-cases, where the meson macro template does not match that > defined for make. Again, this is intended to be temporary and a > deprecation notice is given for the macros in that file. > Why we need this backward compatibility? The macros are to enable/disable a module, so isn't it DPDK internal. If we enable the macros for new naming convention and update the build system and code for new macros, will it affect the end user? > > * Finally, we replace all instances of the old macros in the codebase with > the newer versions. While the work done in the first four patches (steps > 1-3 above) should be ok to backport, this final patch is not suitable for > backporting. However, it is relatively simple to produce a new patch for > backporting which allow either old or new values to be used in macros. > > > Open issues/considerations after this patch: > > * We still have inconsistencies in our driver macro and naming templates. > This is just a nice-to-have, but if people are ok with generally having a > breakage in our macro defines, we could clean this up a lot further. > Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most > others have it before the name. Notice also that many device classes have > the class at the end of the template, while bbdev has it in the middle. > $ git grep config_flag_fmt -- drivers/*/meson.build > drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' > drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' > drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' > drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' > drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' > drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' > drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' > drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' > > * Are we ok to remove the older macros after one release of deprecation, or > do we need to wait to next API window. > > * I have not made any changes to the docs for this, since I expect that > these macros are already covered by the doc changes in the make removal > set. > > Reviews and comments welcome. > > Bruce Richardson (5): > app: fix missing dependencies > examples/l2fwd-crypto: fix missing dependency > meson: fix compatibility with make build defines > build: add defines for compatibility with make build > build: replace use of old build macros > > app/test-crypto-perf/meson.build | 3 + > app/test-pmd/cmdline.c | 8 +- > app/test-pmd/meson.build | 12 +++ > app/test-pmd/parameters.c | 12 +-- > app/test-pmd/testpmd.c | 24 ++--- > app/test-pmd/testpmd.h | 4 +- > app/test/meson.build | 3 + > app/test/test_eal_flags.c | 4 +- > config/meson.build | 3 +- > config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++ > config/rte_config.h | 1 + > doc/guides/rel_notes/deprecation.rst | 17 ++++ > drivers/compress/meson.build | 2 +- > drivers/crypto/meson.build | 2 +- > drivers/event/meson.build | 2 +- > drivers/meson.build | 15 ++++ > examples/l2fwd-crypto/meson.build | 3 + > 17 files changed, 214 insertions(+), 30 deletions(-) > create mode 100644 config/rte_compatibility_defines.h > ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility 2020-09-30 16:12 ` Ferruh Yigit @ 2020-09-30 16:19 ` Bruce Richardson 0 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-09-30 16:19 UTC (permalink / raw) To: Ferruh Yigit; +Cc: david.marchand, dev On Wed, Sep 30, 2020 at 05:12:50PM +0100, Ferruh Yigit wrote: > On 9/16/2020 5:44 PM, Bruce Richardson wrote: > > As flagged previously on-list, there are a number of macros used to specify > > what libs and drivers are enabled in the build which differ from the > > equivalents used with make. This patchset is one possible approach to > > fixing these, but as part of the investigation some issues were hit where > > I'd like additional input to ensure we are ok with the approach taken in > > this set. > > > > First, a problem statement: > > > > * While the make build defines generally followed a pattern, there were > > many instances where the defines were unique. These can be seen in the > > values defined in patch 4. > > > > * The NIC PMDs had two separate standards for the defines - some (the > > physical device drivers) tended to have the _PMD at the end of the > > macros, while the virtual drivers had it in the middle. Since the > > majority seemed to go with it at the end, meson chose this option. > > However, as can be seen from patch 4, a number now need special handling > > for compatibility > > +1 to all X_PMD macros. > > > > > * This "_PMD" at the end made its way into other device classes, such as > > crypto and event, but it appears that the standard for these classes from > > make is in fact the opposite. Therefore we have had for the last 2+ years > > conflicting macros for crypto, compression and event classes. > > > > * There is also the question of how important compatibility for these > > macros is, especially since we have had numerous incompatibilities > > without it being reported before. There is also the issue of the > > deprecation process for macros, since these are not part of any ABI. > > > > What's done in this set: > > > > * Firstly, and missing dependencies on apps or examples had to be fixed, > > where a dependency was missed because it was never needed due to the code > > being stripped out because of a missing macro. > > > > * Secondly, since it is likely that use of the defines from make is more > > widespread than those from meson, the defines for the crypto, compression > > and event classes are changed to align with the make values. Just in case > > though, temporary code is added to drivers/meson.build to redefine the > > old meson values too, and a deprecation notice is added for these. The > > hope is that we can then remove this temporary code in the next release, > > leaving us with just one macro style for each driver class. > > > > * Thirdly, we add an additional set of backward compatibility macros for > > the ~30 special-cases, where the meson macro template does not match that > > defined for make. Again, this is intended to be temporary and a > > deprecation notice is given for the macros in that file. > > > > Why we need this backward compatibility? The macros are to enable/disable a > module, so isn't it DPDK internal. > If we enable the macros for new naming convention and update the build > system and code for new macros, will it affect the end user? > I'd love to be able to just take this option, but the macros are used to indicate to applications what drivers or other components can be expected to be available - much as the case for testpmd. Ideally, they should not be necessary. I think the best approach is that proposed earlier on this thread - we keep backward compatibility as much as possible in this release, but add in a new set of standardized macros and a deprecation notice about the old ones. I hope to work on a new rev of this patchset shortly. /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (7 preceding siblings ...) 2020-09-30 16:12 ` Ferruh Yigit @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 1/8] app: fix missing dependencies Bruce Richardson ` (7 more replies) 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson ` (2 subsequent siblings) 11 siblings, 8 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson Following on from discussion in v1 of this RFC, this second RFC looks to completely rework the automated macros defined by meson to indicate a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config. [For completeness though, a draft 21.02 patch removing those backward compatibility macros is included in the set, done while the work is fresh in my mind. :-)] Advantages of this rework: * Much cleaner having standard macros * No need for defining the format of macros for each class * Shorter macros (for the most part) Disadvantages: * Potentially requires application changes * Inconsistency between the auto-defined macros and the other feature-set ones. Bruce Richardson (8): app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency build: add defines for compatibility with make build qat: build from common folder build: remove library name from version map filename build: standardize component names and defines build: replace use of old build macros [v21.02] build: remove compatibility build defines app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 8 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 3 + app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 34 +++- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 33 +-- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- config/meson.build | 3 +- doc/guides/rel_notes/deprecation.rst | 8 + ..._fpga_5gnr_fec_version.map => version.map} | 0 ...v_fpga_lte_fec_version.map => version.map} | 0 drivers/baseband/meson.build | 3 - ...pmd_bbdev_null_version.map => version.map} | 0 ...bbdev_turbo_sw_version.map => version.map} | 0 .../{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- ...{rte_bus_fslmc_version.map => version.map} | 0 ...{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/meson.build | 2 - .../{rte_bus_pci_version.map => version.map} | 0 .../{rte_bus_vdev_version.map => version.map} | 0 ...{rte_bus_vmbus_version.map => version.map} | 0 ...rte_common_cpt_version.map => version.map} | 0 ...e_common_dpaax_version.map => version.map} | 0 ...te_common_iavf_version.map => version.map} | 0 drivers/common/meson.build | 4 +- drivers/common/mlx5/meson.build | 1 - ...te_common_mlx5_version.map => version.map} | 0 ...te_common_mvep_version.map => version.map} | 0 ...ommon_octeontx_version.map => version.map} | 0 ...mmon_octeontx2_version.map => version.map} | 0 drivers/common/qat/meson.build | 68 ++++++- .../qat/version.map} | 0 ...common_sfc_efx_version.map => version.map} | 0 .../version.map} | 0 drivers/compress/meson.build | 4 +- drivers/compress/octeontx/meson.build | 1 - .../version.map} | 0 drivers/compress/qat/meson.build | 17 -- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../{rte_pmd_zlib_version.map => version.map} | 0 ..._pmd_aesni_gcm_version.map => version.map} | 0 .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- ...e_pmd_aesni_mb_version.map => version.map} | 0 ...{rte_pmd_armv8_version.map => version.map} | 0 ...te_pmd_caam_jr_version.map => version.map} | 0 .../{rte_pmd_ccp_version.map => version.map} | 0 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- ..._pmd_dpaa2_sec_version.map => version.map} | 0 drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- ...e_pmd_dpaa_sec_version.map => version.map} | 0 ...rte_pmd_kasumi_version.map => version.map} | 0 drivers/crypto/meson.build | 3 - ...{rte_pmd_mvsam_version.map => version.map} | 0 ...rte_pmd_nitrox_version.map => version.map} | 0 drivers/crypto/null/meson.build | 1 - ...md_null_crypto_version.map => version.map} | 0 drivers/crypto/octeontx/meson.build | 1 - ...cteontx_crypto_version.map => version.map} | 0 drivers/crypto/octeontx2/meson.build | 1 - ...teontx2_crypto_version.map => version.map} | 0 ...te_pmd_openssl_version.map => version.map} | 0 drivers/crypto/qat/meson.build | 23 --- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/crypto/scheduler/meson.build | 1 - ...ypto_scheduler_version.map => version.map} | 0 ...rte_pmd_snow3g_version.map => version.map} | 0 drivers/crypto/virtio/meson.build | 1 - ..._virtio_crypto_version.map => version.map} | 0 .../{rte_pmd_zuc_version.map => version.map} | 0 drivers/event/dpaa/meson.build | 2 +- ...pmd_dpaa_event_version.map => version.map} | 0 drivers/event/dpaa2/meson.build | 2 +- ...md_dpaa2_event_version.map => version.map} | 0 ..._pmd_dsw_event_version.map => version.map} | 0 drivers/event/meson.build | 2 - drivers/event/octeontx/meson.build | 2 +- ...octeontx_event_version.map => version.map} | 0 drivers/event/octeontx2/meson.build | 2 +- ...cteontx2_event_version.map => version.map} | 0 ...pmd_opdl_event_version.map => version.map} | 0 ...skeleton_event_version.map => version.map} | 0 ...e_pmd_sw_event_version.map => version.map} | 0 ...mempool_bucket_version.map => version.map} | 0 ...e_mempool_dpaa_version.map => version.map} | 0 ..._mempool_dpaa2_version.map => version.map} | 0 drivers/mempool/meson.build | 2 - ...mpool_octeontx_version.map => version.map} | 0 ...pool_octeontx2_version.map => version.map} | 0 ...e_mempool_ring_version.map => version.map} | 0 ..._mempool_stack_version.map => version.map} | 0 drivers/meson.build | 18 +- ..._pmd_af_packet_version.map => version.map} | 0 ...rte_pmd_af_xdp_version.map => version.map} | 0 .../{rte_pmd_ark_version.map => version.map} | 0 ...e_pmd_atlantic_version.map => version.map} | 0 .../{rte_pmd_avp_version.map => version.map} | 0 ...{rte_pmd_axgbe_version.map => version.map} | 0 ...{rte_pmd_bnx2x_version.map => version.map} | 0 .../{rte_pmd_bnxt_version.map => version.map} | 0 .../{rte_pmd_bond_version.map => version.map} | 0 ...{rte_pmd_cxgbe_version.map => version.map} | 0 .../{rte_pmd_dpaa_version.map => version.map} | 0 ...{rte_pmd_dpaa2_version.map => version.map} | 0 ...{rte_pmd_e1000_version.map => version.map} | 0 .../{rte_pmd_ena_version.map => version.map} | 0 ...{rte_pmd_enetc_version.map => version.map} | 0 .../{rte_pmd_enic_version.map => version.map} | 0 ...e_pmd_failsafe_version.map => version.map} | 0 ...{rte_pmd_fm10k_version.map => version.map} | 0 ...{rte_pmd_hinic_version.map => version.map} | 0 .../{rte_pmd_hns3_version.map => version.map} | 0 .../{rte_pmd_i40e_version.map => version.map} | 0 .../{rte_pmd_iavf_version.map => version.map} | 0 .../{rte_pmd_ice_version.map => version.map} | 0 .../{rte_pmd_igc_version.map => version.map} | 0 ...{rte_pmd_ionic_version.map => version.map} | 0 ...rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- ...{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/meson.build | 2 +- .../{rte_pmd_kni_version.map => version.map} | 0 ...e_pmd_liquidio_version.map => version.map} | 0 ...{rte_pmd_memif_version.map => version.map} | 0 drivers/net/meson.build | 2 - drivers/net/mlx4/meson.build | 2 +- .../{rte_pmd_mlx4_version.map => version.map} | 0 .../{rte_pmd_mlx5_version.map => version.map} | 0 ...rte_pmd_mvneta_version.map => version.map} | 0 ...{rte_pmd_mvpp2_version.map => version.map} | 0 drivers/net/netvsc/meson.build | 2 +- ...rte_pmd_netvsc_version.map => version.map} | 0 .../{rte_pmd_nfb_version.map => version.map} | 0 .../{rte_pmd_nfp_version.map => version.map} | 0 .../{rte_pmd_null_version.map => version.map} | 0 ...e_pmd_octeontx_version.map => version.map} | 0 ..._pmd_octeontx2_version.map => version.map} | 0 .../{rte_pmd_pcap_version.map => version.map} | 0 .../{rte_pmd_pfe_version.map => version.map} | 0 .../{rte_pmd_qede_version.map => version.map} | 0 .../{rte_pmd_ring_version.map => version.map} | 0 .../{rte_pmd_sfc_version.map => version.map} | 0 ...te_pmd_softnic_version.map => version.map} | 0 ...e_pmd_szedata2_version.map => version.map} | 0 .../{rte_pmd_tap_version.map => version.map} | 0 ...e_pmd_thunderx_version.map => version.map} | 0 ...md_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/meson.build | 2 +- ...{rte_pmd_vhost_version.map => version.map} | 0 ...rte_pmd_virtio_version.map => version.map} | 0 ...te_pmd_vmxnet3_version.map => version.map} | 0 drivers/raw/dpaa2_cmdif/meson.build | 2 +- ...ev_dpaa2_cmdif_version.map => version.map} | 0 drivers/raw/dpaa2_qdma/meson.build | 2 +- ...dev_dpaa2_qdma_version.map => version.map} | 0 drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/raw/ifpga/meson.build | 2 +- ...e_rawdev_ifpga_version.map => version.map} | 0 ...te_rawdev_ioat_version.map => version.map} | 0 drivers/raw/meson.build | 2 - ...rte_rawdev_ntb_version.map => version.map} | 0 ..._octeontx2_dma_version.map => version.map} | 0 ...v_octeontx2_ep_version.map => version.map} | 0 ...awdev_skeleton_version.map => version.map} | 0 drivers/regex/meson.build | 2 - drivers/regex/mlx5/meson.build | 1 - ...pmd_mlx5_regex_version.map => version.map} | 0 drivers/vdpa/ifc/meson.build | 2 +- .../{rte_pmd_ifc_version.map => version.map} | 0 drivers/vdpa/meson.build | 2 - drivers/vdpa/mlx5/meson.build | 1 - ..._pmd_mlx5_vdpa_version.map => version.map} | 0 examples/bond/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 4 +- examples/ioat/meson.build | 4 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 3 + examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 4 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 14 +- .../{rte_acl_version.map => version.map} | 0 .../{rte_bbdev_version.map => version.map} | 0 ...e_bitratestats_version.map => version.map} | 0 .../{rte_bpf_version.map => version.map} | 0 .../{rte_cfgfile_version.map => version.map} | 0 .../{rte_cmdline_version.map => version.map} | 0 ...te_compressdev_version.map => version.map} | 0 ...{rte_cryptodev_version.map => version.map} | 0 ...te_distributor_version.map => version.map} | 0 lib/librte_eal/linux/eal.c | 4 +- .../{rte_eal_version.map => version.map} | 0 .../{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/meson.build | 1 - .../{rte_ethdev_version.map => version.map} | 0 .../{rte_eventdev_version.map => version.map} | 0 .../{rte_fib_version.map => version.map} | 0 ..._flow_classify_version.map => version.map} | 0 lib/librte_graph/meson.build | 2 - .../{rte_graph_version.map => version.map} | 0 .../{rte_gro_version.map => version.map} | 0 .../{rte_gso_version.map => version.map} | 0 .../{rte_hash_version.map => version.map} | 0 .../{rte_ip_frag_version.map => version.map} | 0 .../{rte_ipsec_version.map => version.map} | 0 .../{rte_jobstats_version.map => version.map} | 0 .../{rte_kni_version.map => version.map} | 0 .../{rte_kvargs_version.map => version.map} | 0 ...e_latencystats_version.map => version.map} | 0 .../{rte_lpm_version.map => version.map} | 0 .../{rte_mbuf_version.map => version.map} | 0 .../{rte_member_version.map => version.map} | 0 .../{rte_mempool_version.map => version.map} | 0 .../{rte_meter_version.map => version.map} | 0 lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- .../{rte_metrics_version.map => version.map} | 0 .../{rte_net_version.map => version.map} | 0 .../{rte_node_version.map => version.map} | 0 .../{rte_pci_version.map => version.map} | 0 .../{rte_pdump_version.map => version.map} | 0 .../{rte_pipeline_version.map => version.map} | 0 lib/librte_port/meson.build | 2 +- .../{rte_port_version.map => version.map} | 0 .../{rte_power_version.map => version.map} | 0 .../{rte_rawdev_version.map => version.map} | 0 .../{rte_rcu_version.map => version.map} | 0 .../{rte_regexdev_version.map => version.map} | 0 .../{rte_reorder_version.map => version.map} | 0 .../{rte_rib_version.map => version.map} | 0 .../{rte_ring_version.map => version.map} | 0 .../{rte_sched_version.map => version.map} | 0 .../{rte_security_version.map => version.map} | 0 .../{rte_stack_version.map => version.map} | 0 .../{rte_table_version.map => version.map} | 0 ...{rte_telemetry_version.map => version.map} | 0 .../{rte_timer_version.map => version.map} | 0 .../{rte_vhost_version.map => version.map} | 0 lib/meson.build | 8 +- 290 files changed, 506 insertions(+), 510 deletions(-) rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%) rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) delete mode 100644 drivers/crypto/qat/meson.build rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 1/8] app: fix missing dependencies 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson ` (6 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson, stable A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build. Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 996ef1176111 ("app: add all remaining apps to meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test-crypto-perf/meson.build | 3 +++ app/test-pmd/meson.build | 12 ++++++++++++ app/test/meson.build | 3 +++ 3 files changed, 18 insertions(+) diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index f394b75ba5..4bd71510dc 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,3 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index f52ab148f6..0d9e450494 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -31,6 +31,18 @@ endif if dpdk_conf.has('RTE_LIBRTE_PDUMP') deps += 'pdump' endif +if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') + deps += 'bitratestats' +endif +if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') + deps += 'latencystats' +endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif +if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') + deps += 'pmd_bond' +endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') deps += 'pmd_bnxt' endif diff --git a/app/test/meson.build b/app/test/meson.build index 181e870290..781555f9de 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -346,6 +346,9 @@ endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') test_deps += 'pmd_skeleton_event' endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + test_deps += 'pmd_crypto_scheduler' +endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += 'test_telemetry_json.c' fast_tests += [['telemetry_json_autotest', true]] -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 2/8] examples/l2fwd-crypto: fix missing dependency 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 1/8] app: fix missing dependencies Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 3/8] build: add defines for compatibility with make build Bruce Richardson ` (5 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson, stable When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build. Fixes: 89f0711f9ddf ("examples: build some samples with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/l2fwd-crypto/meson.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 6c852ad199..39e1604fac 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,6 +7,9 @@ # DPDK instance, use 'make' deps += 'cryptodev' +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif allow_experimental_apis = true sources = files( 'main.c' -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 3/8] build: add defines for compatibility with make build 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 1/8] app: fix missing dependencies Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 4/8] qat: build from common folder Bruce Richardson ` (4 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson, stable The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases. As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions. For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson. Fixes: 5b9656b157d3 ("lib: build with meson") Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") Fixes: dcadbbde8e61 ("crypto/null: build with meson") Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ config/rte_config.h | 1 + drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 ++++ 7 files changed, 150 insertions(+), 4 deletions(-) create mode 100644 config/rte_compatibility_defines.h diff --git a/config/meson.build b/config/meson.build index 69f2aeb605..3a36d9dd4c 100644 --- a/config/meson.build +++ b/config/meson.build @@ -254,7 +254,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers('rte_config.h', subdir: get_option('include_subdir_arch')) +install_headers(['rte_config.h', 'rte_compatibility_defines.h'], + subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS dpdk_conf.set('RTE_EAL_VFIO', is_linux) diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h new file mode 100644 index 0000000000..47600052b6 --- /dev/null +++ b/config/rte_compatibility_defines.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2017 Intel Corporation + */ + +#ifndef _RTE_CONFIG_H_ +#error "This file should only be included via rte_config.h" +#endif + +/* + * NOTE: these defines are for compatibility only and will be removed in a + * future DPDK release. + */ + +#ifdef RTE_LIBRTE_BITRATESTATS +#define RTE_LIBRTE_BITRATE +#endif + +#ifdef RTE_LIBRTE_LATENCYSTATS +#define RTE_LIBRTE_LATENCY_STATS +#endif + +#ifdef RTE_LIBRTE_DPAAX_COMMON +#define RTE_LIBRTE_COMMON_DPAAX +#endif + +#ifdef RTE_LIBRTE_VMBUS_BUS +#define RTE_LIBRTE_VMBUS +#endif + +#ifdef RTE_LIBRTE_BUCKET_MEMPOOL +#define RTE_DRIVER_MEMPOOL_BUCKET +#endif + +#ifdef RTE_LIBRTE_RING_MEMPOOL +#define RTE_DRIVER_MEMPOOL_RING +#endif + +#ifdef RTE_LIBRTE_STACK_MEMPOOL +#define RTE_DRIVER_MEMPOOL_STACK +#endif + +#ifdef RTE_LIBRTE_AF_PACKET_PMD +#define RTE_LIBRTE_PMD_AF_PACKET +#endif + +#ifdef RTE_LIBRTE_AF_XDP_PMD +#define RTE_LIBRTE_PMD_AF_XDP +#endif + +#ifdef RTE_LIBRTE_BOND_PMD +#define RTE_LIBRTE_PMD_BOND +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_EM_PMD +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_IGB_PMD +#endif + +#ifdef RTE_LIBRTE_FAILSAFE_PMD +#define RTE_LIBRTE_PMD_FAILSAFE +#endif + +#ifdef RTE_LIBRTE_KNI_PMD +#define RTE_LIBRTE_PMD_KNI +#endif + +#ifdef RTE_LIBRTE_LIQUIDIO_PMD +#define RTE_LIBRTE_LIO_PMD +#endif + +#ifdef RTE_LIBRTE_MEMIF_PMD +#define RTE_LIBRTE_PMD_MEMIF +#endif + +#ifdef RTE_LIBRTE_NULL_PMD +#define RTE_LIBRTE_PMD_NULL +#endif + +#ifdef RTE_LIBRTE_PCAP_PMD +#define RTE_LIBRTE_PMD_PCAP +#endif + +#ifdef RTE_LIBRTE_RING_PMD +#define RTE_LIBRTE_PMD_RING +#endif + +#ifdef RTE_LIBRTE_SFC_PMD +#define RTE_LIBRTE_SFC_EFX_PMD +#endif + +#ifdef RTE_LIBRTE_SOFTNIC_PMD +#define RTE_LIBRTE_PMD_SOFTNIC +#endif + +#ifdef RTE_LIBRTE_SZEDATA2_PMD +#define RTE_LIBRTE_PMD_SZEDATA2 +#endif + +#ifdef RTE_LIBRTE_TAP_PMD +#define RTE_LIBRTE_PMD_TAP +#endif + +#ifdef RTE_LIBRTE_THUNDERX_PMD +#define RTE_LIBRTE_THUNDERX_NICVF_PMD +#endif + +#ifdef RTE_LIBRTE_VHOST_PMD +#define RTE_LIBRTE_PMD_VHOST +#endif + +#ifdef RTE_LIBRTE_PMD_ARMV8 +#define RTE_LIBRTE_PMD_ARMV8_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_MVSAM +#define RTE_LIBRTE_PMD_MVSAM_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS +#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV +#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF +#endif + diff --git a/config/rte_config.h b/config/rte_config.h index 0bae630fd9..cacc1837cf 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,6 +13,7 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> +#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index ee883c3f9f..bea1720a0b 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,5 +8,5 @@ endif drivers = ['isal', 'octeontx', 'qat', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index a2423507ad..25b99c19cb 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,5 +26,5 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/event/meson.build b/drivers/event/meson.build index ebe76a75c4..f2a3431472 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/meson.build b/drivers/meson.build index 5f95265573..b5ac483d31 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -117,6 +117,21 @@ foreach subpath:subdirs fmt_name = name endif dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + # for driver compatibility, since we changed the + # default to match that of make. Remove in future release + # after following deprecation process + if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' + or class == 'compress' + or class == 'event') + alt_flag_fmt = '_@0@_PMD'.join( + config_flag_fmt.split('_PMD_@0@')) + if config_flag_fmt.contains('EVENTDEV') + alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( + config_flag_fmt.split('_PMD_@0@_EVENTDEV')) + endif + dpdk_conf.set(alt_flag_fmt.format( + fmt_name.to_upper()), 1) + endif lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 4/8] qat: build from common folder 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (2 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 3/8] build: add defines for compatibility with make build Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 5/8] build: remove library name from version map filename Bruce Richardson ` (3 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders. This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- drivers/common/meson.build | 2 +- drivers/common/qat/meson.build | 69 ++++++++++++++++--- .../qat/rte_common_qat_version.map} | 0 drivers/compress/meson.build | 2 +- drivers/compress/qat/meson.build | 17 ----- drivers/crypto/meson.build | 1 - drivers/crypto/qat/meson.build | 23 ------- drivers/meson.build | 1 + 8 files changed, 63 insertions(+), 52 deletions(-) rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build delete mode 100644 drivers/crypto/qat/meson.build diff --git a/drivers/common/meson.build b/drivers/common/meson.build index 7ac1ca73a2..abb4f1529a 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -6,6 +6,6 @@ if is_windows endif std_deps = ['eal'] -drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx'] +drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 8de2492893..3409162d03 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -1,15 +1,66 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2018 Intel Corporation -# This does not build a driver, but instead holds common files for -# the crypto and compression drivers. -build = false -reason = '' # sentinal value to suppress printout -qat_deps = ['bus_pci'] -qat_sources = files('qat_common.c', +config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' +driver_name_fmt = 'rte_common_@0@' + +qat_crypto = true +qat_crypto_path = 'crypto/qat' +qat_crypto_relpath = '../../' + qat_crypto_path +qat_compress = true +qat_compress_path = 'compress/qat' +qat_compress_relpath = '../../' + qat_compress_path + +if disabled_drivers.contains(qat_crypto_path) + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif +if disabled_drivers.contains(qat_compress_path) + qat_compress = false + dpdk_drvs_disabled += qat_compress_path + set_variable(qat_compress_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif + +libcrypto = dependency('libcrypto', required: false) +if qat_crypto and not libcrypto.found() + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'missing dependency, libcrypto') +endif + +# The driver should not build if both compression and crypto are disabled +#FIXME common code depends on compression files so check only compress! +if not qat_compress # and not qat_crypto + build = false + reason = '' # rely on reason for compress/crypto above + subdir_done() +endif + +deps += ['bus_pci', 'cryptodev', 'net', 'compressdev'] +sources += files('qat_common.c', 'qat_qp.c', 'qat_device.c', 'qat_logs.c') -qat_includes = [include_directories('.', 'qat_adf')] -qat_ext_deps = [] -qat_cflags = [] +includes += include_directories('qat_adf', + qat_crypto_relpath, + qat_compress_relpath) + +if qat_compress + foreach f: ['qat_comp_pmd.c', 'qat_comp.c'] + sources += files(join_paths(qat_compress_relpath, f)) + endforeach +endif + +if qat_crypto + foreach f: ['qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c', + 'qat_asym_pmd.c', 'qat_asym.c'] + sources += files(join_paths(qat_crypto_relpath, f)) + endforeach + deps += ['security'] + ext_deps += libcrypto + cflags += ['-DBUILD_QAT_SYM', '-DBUILD_QAT_ASYM'] +endif diff --git a/drivers/compress/qat/rte_pmd_qat_version.map b/drivers/common/qat/rte_common_qat_version.map similarity index 100% rename from drivers/compress/qat/rte_pmd_qat_version.map rename to drivers/common/qat/rte_common_qat_version.map diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index bea1720a0b..3a4723c0ce 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -5,7 +5,7 @@ if is_windows subdir_done() endif -drivers = ['isal', 'octeontx', 'qat', 'zlib'] +drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/compress/qat/meson.build b/drivers/compress/qat/meson.build deleted file mode 100644 index a002469809..0000000000 --- a/drivers/compress/qat/meson.build +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - - -# Add our sources files to the list -qat_sources += files('qat_comp_pmd.c', - 'qat_comp.c') -qat_includes += include_directories('.') -qat_deps += 'compressdev' -qat_ext_deps += dep - -# build the whole driver -sources += qat_sources -cflags += qat_cflags -deps += qat_deps -ext_deps += qat_ext_deps -includes += qat_includes diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 25b99c19cb..bd7a940e6d 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -19,7 +19,6 @@ drivers = ['aesni_gcm', 'octeontx', 'octeontx2', 'openssl', - 'qat', 'scheduler', 'snow3g', 'virtio', diff --git a/drivers/crypto/qat/meson.build b/drivers/crypto/qat/meson.build deleted file mode 100644 index a225f374a6..0000000000 --- a/drivers/crypto/qat/meson.build +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - -# this does not build the QAT driver, instead that is done in the compression -# driver which comes later. Here we just add our sources files to the list -build = false -reason = '' # sentinal value to suppress printout -dep = dependency('libcrypto', required: false) -qat_includes += include_directories('.') -qat_deps += 'cryptodev' -qat_deps += 'net' -qat_deps += 'security' -if dep.found() - # Add our sources files to the list - qat_sources += files('qat_sym_pmd.c', - 'qat_sym.c', - 'qat_sym_session.c', - 'qat_asym_pmd.c', - 'qat_asym.c') - qat_ext_deps += dep - qat_cflags += '-DBUILD_QAT_SYM' - qat_cflags += '-DBUILD_QAT_ASYM' -endif diff --git a/drivers/meson.build b/drivers/meson.build index b5ac483d31..b95b005839 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -6,6 +6,7 @@ subdirs = [ 'common', 'bus', 'common/mlx5', # depends on bus. + 'common/qat', # depends on bus. 'mempool', # depends on common and bus. 'net', # depends on common, bus, mempool 'raw', # depends on common, bus and net. -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 5/8] build: remove library name from version map filename 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (3 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 4/8] qat: build from common folder Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 6/8] build: standardize component names and defines Bruce Richardson ` (2 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} | 0 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} | 0 .../null/{rte_pmd_bbdev_null_version.map => version.map} | 0 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map} | 0 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} | 0 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/pci/{rte_bus_pci_version.map => version.map} | 0 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} | 0 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} | 0 .../common/cpt/{rte_common_cpt_version.map => version.map} | 0 .../dpaax/{rte_common_dpaax_version.map => version.map} | 0 .../common/iavf/{rte_common_iavf_version.map => version.map} | 0 .../common/mlx5/{rte_common_mlx5_version.map => version.map} | 0 .../common/mvep/{rte_common_mvep_version.map => version.map} | 0 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0 .../{rte_common_octeontx2_version.map => version.map} | 0 .../common/qat/{rte_common_qat_version.map => version.map} | 0 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map} | 0 .../compress/isal/{rte_pmd_isal_version.map => version.map} | 0 .../{rte_pmd_octeontx_compress_version.map => version.map} | 0 .../compress/zlib/{rte_pmd_zlib_version.map => version.map} | 0 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} | 0 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} | 0 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map} | 0 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map} | 0 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} | 0 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} | 0 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} | 0 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} | 0 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0 .../null/{rte_pmd_null_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx2_crypto_version.map => version.map} | 0 .../openssl/{rte_pmd_openssl_version.map => version.map} | 0 .../{rte_pmd_crypto_scheduler_version.map => version.map} | 0 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} | 0 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map} | 0 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} | 0 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map} | 0 .../{rte_pmd_octeontx_event_version.map => version.map} | 0 .../{rte_pmd_octeontx2_event_version.map => version.map} | 0 .../opdl/{rte_pmd_opdl_event_version.map => version.map} | 0 .../{rte_pmd_skeleton_event_version.map => version.map} | 0 .../event/sw/{rte_pmd_sw_event_version.map => version.map} | 0 .../bucket/{rte_mempool_bucket_version.map => version.map} | 0 .../dpaa/{rte_mempool_dpaa_version.map => version.map} | 0 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map} | 0 .../{rte_mempool_octeontx_version.map => version.map} | 0 .../{rte_mempool_octeontx2_version.map => version.map} | 0 .../ring/{rte_mempool_ring_version.map => version.map} | 0 .../stack/{rte_mempool_stack_version.map => version.map} | 0 drivers/meson.build | 4 ++-- .../af_packet/{rte_pmd_af_packet_version.map => version.map} | 0 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} | 0 drivers/net/ark/{rte_pmd_ark_version.map => version.map} | 0 .../atlantic/{rte_pmd_atlantic_version.map => version.map} | 0 drivers/net/avp/{rte_pmd_avp_version.map => version.map} | 0 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} | 0 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} | 0 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} | 0 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} | 0 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} | 0 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} | 0 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} | 0 drivers/net/ena/{rte_pmd_ena_version.map => version.map} | 0 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} | 0 drivers/net/enic/{rte_pmd_enic_version.map => version.map} | 0 .../failsafe/{rte_pmd_failsafe_version.map => version.map} | 0 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} | 0 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} | 0 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} | 0 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} | 0 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} | 0 drivers/net/ice/{rte_pmd_ice_version.map => version.map} | 0 drivers/net/igc/{rte_pmd_igc_version.map => version.map} | 0 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} | 0 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/{rte_pmd_kni_version.map => version.map} | 0 .../liquidio/{rte_pmd_liquidio_version.map => version.map} | 0 drivers/net/memif/{rte_pmd_memif_version.map => version.map} | 0 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} | 0 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} | 0 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map} | 0 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} | 0 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map} | 0 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} | 0 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} | 0 drivers/net/null/{rte_pmd_null_version.map => version.map} | 0 .../octeontx/{rte_pmd_octeontx_version.map => version.map} | 0 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map} | 0 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} | 0 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} | 0 drivers/net/qede/{rte_pmd_qede_version.map => version.map} | 0 drivers/net/ring/{rte_pmd_ring_version.map => version.map} | 0 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} | 0 .../net/softnic/{rte_pmd_softnic_version.map => version.map} | 0 .../szedata2/{rte_pmd_szedata2_version.map => version.map} | 0 drivers/net/tap/{rte_pmd_tap_version.map => version.map} | 0 .../thunderx/{rte_pmd_thunderx_version.map => version.map} | 0 .../{rte_pmd_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} | 0 .../net/virtio/{rte_pmd_virtio_version.map => version.map} | 0 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_qdma_version.map => version.map} | 0 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} | 0 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_dma_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_ep_version.map => version.map} | 0 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map} | 0 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} | 0 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} | 0 lib/librte_acl/{rte_acl_version.map => version.map} | 0 lib/librte_bbdev/{rte_bbdev_version.map => version.map} | 0 .../{rte_bitratestats_version.map => version.map} | 0 lib/librte_bpf/{rte_bpf_version.map => version.map} | 0 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} | 0 lib/librte_cmdline/{rte_cmdline_version.map => version.map} | 0 .../{rte_compressdev_version.map => version.map} | 0 .../{rte_cryptodev_version.map => version.map} | 0 .../{rte_distributor_version.map => version.map} | 0 lib/librte_eal/{rte_eal_version.map => version.map} | 0 lib/librte_efd/{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/{rte_ethdev_version.map => version.map} | 0 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0 lib/librte_fib/{rte_fib_version.map => version.map} | 0 .../{rte_flow_classify_version.map => version.map} | 0 lib/librte_graph/{rte_graph_version.map => version.map} | 0 lib/librte_gro/{rte_gro_version.map => version.map} | 0 lib/librte_gso/{rte_gso_version.map => version.map} | 0 lib/librte_hash/{rte_hash_version.map => version.map} | 0 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} | 0 lib/librte_ipsec/{rte_ipsec_version.map => version.map} | 0 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0 lib/librte_kni/{rte_kni_version.map => version.map} | 0 lib/librte_kvargs/{rte_kvargs_version.map => version.map} | 0 .../{rte_latencystats_version.map => version.map} | 0 lib/librte_lpm/{rte_lpm_version.map => version.map} | 0 lib/librte_mbuf/{rte_mbuf_version.map => version.map} | 0 lib/librte_member/{rte_member_version.map => version.map} | 0 lib/librte_mempool/{rte_mempool_version.map => version.map} | 0 lib/librte_meter/{rte_meter_version.map => version.map} | 0 lib/librte_metrics/{rte_metrics_version.map => version.map} | 0 lib/librte_net/{rte_net_version.map => version.map} | 0 lib/librte_node/{rte_node_version.map => version.map} | 0 lib/librte_pci/{rte_pci_version.map => version.map} | 0 lib/librte_pdump/{rte_pdump_version.map => version.map} | 0 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0 lib/librte_port/{rte_port_version.map => version.map} | 0 lib/librte_power/{rte_power_version.map => version.map} | 0 lib/librte_rawdev/{rte_rawdev_version.map => version.map} | 0 lib/librte_rcu/{rte_rcu_version.map => version.map} | 0 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0 lib/librte_reorder/{rte_reorder_version.map => version.map} | 0 lib/librte_rib/{rte_rib_version.map => version.map} | 0 lib/librte_ring/{rte_ring_version.map => version.map} | 0 lib/librte_sched/{rte_sched_version.map => version.map} | 0 lib/librte_security/{rte_security_version.map => version.map} | 0 lib/librte_stack/{rte_stack_version.map => version.map} | 0 lib/librte_table/{rte_table_version.map => version.map} | 0 .../{rte_telemetry_version.map => version.map} | 0 lib/librte_timer/{rte_timer_version.map => version.map} | 0 lib/librte_vhost/{rte_vhost_version.map => version.map} | 0 lib/meson.build | 4 ++-- 172 files changed, 4 insertions(+), 4 deletions(-) rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%) rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%) rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/version.map similarity index 100% rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map rename to drivers/baseband/fpga_5gnr_fec/version.map diff --git a/drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map b/drivers/baseband/fpga_lte_fec/version.map similarity index 100% rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map rename to drivers/baseband/fpga_lte_fec/version.map diff --git a/drivers/baseband/null/rte_pmd_bbdev_null_version.map b/drivers/baseband/null/version.map similarity index 100% rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map rename to drivers/baseband/null/version.map diff --git a/drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map b/drivers/baseband/turbo_sw/version.map similarity index 100% rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map rename to drivers/baseband/turbo_sw/version.map diff --git a/drivers/bus/dpaa/rte_bus_dpaa_version.map b/drivers/bus/dpaa/version.map similarity index 100% rename from drivers/bus/dpaa/rte_bus_dpaa_version.map rename to drivers/bus/dpaa/version.map diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/version.map similarity index 100% rename from drivers/bus/fslmc/rte_bus_fslmc_version.map rename to drivers/bus/fslmc/version.map diff --git a/drivers/bus/ifpga/rte_bus_ifpga_version.map b/drivers/bus/ifpga/version.map similarity index 100% rename from drivers/bus/ifpga/rte_bus_ifpga_version.map rename to drivers/bus/ifpga/version.map diff --git a/drivers/bus/pci/rte_bus_pci_version.map b/drivers/bus/pci/version.map similarity index 100% rename from drivers/bus/pci/rte_bus_pci_version.map rename to drivers/bus/pci/version.map diff --git a/drivers/bus/vdev/rte_bus_vdev_version.map b/drivers/bus/vdev/version.map similarity index 100% rename from drivers/bus/vdev/rte_bus_vdev_version.map rename to drivers/bus/vdev/version.map diff --git a/drivers/bus/vmbus/rte_bus_vmbus_version.map b/drivers/bus/vmbus/version.map similarity index 100% rename from drivers/bus/vmbus/rte_bus_vmbus_version.map rename to drivers/bus/vmbus/version.map diff --git a/drivers/common/cpt/rte_common_cpt_version.map b/drivers/common/cpt/version.map similarity index 100% rename from drivers/common/cpt/rte_common_cpt_version.map rename to drivers/common/cpt/version.map diff --git a/drivers/common/dpaax/rte_common_dpaax_version.map b/drivers/common/dpaax/version.map similarity index 100% rename from drivers/common/dpaax/rte_common_dpaax_version.map rename to drivers/common/dpaax/version.map diff --git a/drivers/common/iavf/rte_common_iavf_version.map b/drivers/common/iavf/version.map similarity index 100% rename from drivers/common/iavf/rte_common_iavf_version.map rename to drivers/common/iavf/version.map diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map b/drivers/common/mlx5/version.map similarity index 100% rename from drivers/common/mlx5/rte_common_mlx5_version.map rename to drivers/common/mlx5/version.map diff --git a/drivers/common/mvep/rte_common_mvep_version.map b/drivers/common/mvep/version.map similarity index 100% rename from drivers/common/mvep/rte_common_mvep_version.map rename to drivers/common/mvep/version.map diff --git a/drivers/common/octeontx/rte_common_octeontx_version.map b/drivers/common/octeontx/version.map similarity index 100% rename from drivers/common/octeontx/rte_common_octeontx_version.map rename to drivers/common/octeontx/version.map diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/version.map similarity index 100% rename from drivers/common/octeontx2/rte_common_octeontx2_version.map rename to drivers/common/octeontx2/version.map diff --git a/drivers/common/qat/rte_common_qat_version.map b/drivers/common/qat/version.map similarity index 100% rename from drivers/common/qat/rte_common_qat_version.map rename to drivers/common/qat/version.map diff --git a/drivers/common/sfc_efx/rte_common_sfc_efx_version.map b/drivers/common/sfc_efx/version.map similarity index 100% rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map rename to drivers/common/sfc_efx/version.map diff --git a/drivers/compress/isal/rte_pmd_isal_version.map b/drivers/compress/isal/version.map similarity index 100% rename from drivers/compress/isal/rte_pmd_isal_version.map rename to drivers/compress/isal/version.map diff --git a/drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map b/drivers/compress/octeontx/version.map similarity index 100% rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map rename to drivers/compress/octeontx/version.map diff --git a/drivers/compress/zlib/rte_pmd_zlib_version.map b/drivers/compress/zlib/version.map similarity index 100% rename from drivers/compress/zlib/rte_pmd_zlib_version.map rename to drivers/compress/zlib/version.map diff --git a/drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map b/drivers/crypto/aesni_gcm/version.map similarity index 100% rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map rename to drivers/crypto/aesni_gcm/version.map diff --git a/drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map b/drivers/crypto/aesni_mb/version.map similarity index 100% rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map rename to drivers/crypto/aesni_mb/version.map diff --git a/drivers/crypto/armv8/rte_pmd_armv8_version.map b/drivers/crypto/armv8/version.map similarity index 100% rename from drivers/crypto/armv8/rte_pmd_armv8_version.map rename to drivers/crypto/armv8/version.map diff --git a/drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map b/drivers/crypto/caam_jr/version.map similarity index 100% rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map rename to drivers/crypto/caam_jr/version.map diff --git a/drivers/crypto/ccp/rte_pmd_ccp_version.map b/drivers/crypto/ccp/version.map similarity index 100% rename from drivers/crypto/ccp/rte_pmd_ccp_version.map rename to drivers/crypto/ccp/version.map diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/version.map similarity index 100% rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map rename to drivers/crypto/dpaa2_sec/version.map diff --git a/drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map b/drivers/crypto/dpaa_sec/version.map similarity index 100% rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map rename to drivers/crypto/dpaa_sec/version.map diff --git a/drivers/crypto/kasumi/rte_pmd_kasumi_version.map b/drivers/crypto/kasumi/version.map similarity index 100% rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map rename to drivers/crypto/kasumi/version.map diff --git a/drivers/crypto/mvsam/rte_pmd_mvsam_version.map b/drivers/crypto/mvsam/version.map similarity index 100% rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map rename to drivers/crypto/mvsam/version.map diff --git a/drivers/crypto/nitrox/rte_pmd_nitrox_version.map b/drivers/crypto/nitrox/version.map similarity index 100% rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map rename to drivers/crypto/nitrox/version.map diff --git a/drivers/crypto/null/rte_pmd_null_crypto_version.map b/drivers/crypto/null/version.map similarity index 100% rename from drivers/crypto/null/rte_pmd_null_crypto_version.map rename to drivers/crypto/null/version.map diff --git a/drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map b/drivers/crypto/octeontx/version.map similarity index 100% rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map rename to drivers/crypto/octeontx/version.map diff --git a/drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map b/drivers/crypto/octeontx2/version.map similarity index 100% rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map rename to drivers/crypto/octeontx2/version.map diff --git a/drivers/crypto/openssl/rte_pmd_openssl_version.map b/drivers/crypto/openssl/version.map similarity index 100% rename from drivers/crypto/openssl/rte_pmd_openssl_version.map rename to drivers/crypto/openssl/version.map diff --git a/drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map b/drivers/crypto/scheduler/version.map similarity index 100% rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map rename to drivers/crypto/scheduler/version.map diff --git a/drivers/crypto/snow3g/rte_pmd_snow3g_version.map b/drivers/crypto/snow3g/version.map similarity index 100% rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map rename to drivers/crypto/snow3g/version.map diff --git a/drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map b/drivers/crypto/virtio/version.map similarity index 100% rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map rename to drivers/crypto/virtio/version.map diff --git a/drivers/crypto/zuc/rte_pmd_zuc_version.map b/drivers/crypto/zuc/version.map similarity index 100% rename from drivers/crypto/zuc/rte_pmd_zuc_version.map rename to drivers/crypto/zuc/version.map diff --git a/drivers/event/dpaa/rte_pmd_dpaa_event_version.map b/drivers/event/dpaa/version.map similarity index 100% rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map rename to drivers/event/dpaa/version.map diff --git a/drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map b/drivers/event/dpaa2/version.map similarity index 100% rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map rename to drivers/event/dpaa2/version.map diff --git a/drivers/event/dsw/rte_pmd_dsw_event_version.map b/drivers/event/dsw/version.map similarity index 100% rename from drivers/event/dsw/rte_pmd_dsw_event_version.map rename to drivers/event/dsw/version.map diff --git a/drivers/event/octeontx/rte_pmd_octeontx_event_version.map b/drivers/event/octeontx/version.map similarity index 100% rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map rename to drivers/event/octeontx/version.map diff --git a/drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map b/drivers/event/octeontx2/version.map similarity index 100% rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map rename to drivers/event/octeontx2/version.map diff --git a/drivers/event/opdl/rte_pmd_opdl_event_version.map b/drivers/event/opdl/version.map similarity index 100% rename from drivers/event/opdl/rte_pmd_opdl_event_version.map rename to drivers/event/opdl/version.map diff --git a/drivers/event/skeleton/rte_pmd_skeleton_event_version.map b/drivers/event/skeleton/version.map similarity index 100% rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map rename to drivers/event/skeleton/version.map diff --git a/drivers/event/sw/rte_pmd_sw_event_version.map b/drivers/event/sw/version.map similarity index 100% rename from drivers/event/sw/rte_pmd_sw_event_version.map rename to drivers/event/sw/version.map diff --git a/drivers/mempool/bucket/rte_mempool_bucket_version.map b/drivers/mempool/bucket/version.map similarity index 100% rename from drivers/mempool/bucket/rte_mempool_bucket_version.map rename to drivers/mempool/bucket/version.map diff --git a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map b/drivers/mempool/dpaa/version.map similarity index 100% rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map rename to drivers/mempool/dpaa/version.map diff --git a/drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map b/drivers/mempool/dpaa2/version.map similarity index 100% rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map rename to drivers/mempool/dpaa2/version.map diff --git a/drivers/mempool/octeontx/rte_mempool_octeontx_version.map b/drivers/mempool/octeontx/version.map similarity index 100% rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map rename to drivers/mempool/octeontx/version.map diff --git a/drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map b/drivers/mempool/octeontx2/version.map similarity index 100% rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map rename to drivers/mempool/octeontx2/version.map diff --git a/drivers/mempool/ring/rte_mempool_ring_version.map b/drivers/mempool/ring/version.map similarity index 100% rename from drivers/mempool/ring/rte_mempool_ring_version.map rename to drivers/mempool/ring/version.map diff --git a/drivers/mempool/stack/rte_mempool_stack_version.map b/drivers/mempool/stack/version.map similarity index 100% rename from drivers/mempool/stack/rte_mempool_stack_version.map rename to drivers/mempool/stack/version.map diff --git a/drivers/meson.build b/drivers/meson.build index b95b005839..3d4bbff13b 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -166,9 +166,9 @@ foreach subpath:subdirs install: true) # now build the shared driver - version_map = '@0@/@1@/@2@_version.map'.format( + version_map = '@0@/@1@/version.map'.format( meson.current_source_dir(), - drv_path, lib_name) + drv_path) implib = 'lib' + lib_name + '.dll.a' def_file = custom_target(lib_name + '_def', diff --git a/drivers/net/af_packet/rte_pmd_af_packet_version.map b/drivers/net/af_packet/version.map similarity index 100% rename from drivers/net/af_packet/rte_pmd_af_packet_version.map rename to drivers/net/af_packet/version.map diff --git a/drivers/net/af_xdp/rte_pmd_af_xdp_version.map b/drivers/net/af_xdp/version.map similarity index 100% rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map rename to drivers/net/af_xdp/version.map diff --git a/drivers/net/ark/rte_pmd_ark_version.map b/drivers/net/ark/version.map similarity index 100% rename from drivers/net/ark/rte_pmd_ark_version.map rename to drivers/net/ark/version.map diff --git a/drivers/net/atlantic/rte_pmd_atlantic_version.map b/drivers/net/atlantic/version.map similarity index 100% rename from drivers/net/atlantic/rte_pmd_atlantic_version.map rename to drivers/net/atlantic/version.map diff --git a/drivers/net/avp/rte_pmd_avp_version.map b/drivers/net/avp/version.map similarity index 100% rename from drivers/net/avp/rte_pmd_avp_version.map rename to drivers/net/avp/version.map diff --git a/drivers/net/axgbe/rte_pmd_axgbe_version.map b/drivers/net/axgbe/version.map similarity index 100% rename from drivers/net/axgbe/rte_pmd_axgbe_version.map rename to drivers/net/axgbe/version.map diff --git a/drivers/net/bnx2x/rte_pmd_bnx2x_version.map b/drivers/net/bnx2x/version.map similarity index 100% rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map rename to drivers/net/bnx2x/version.map diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/version.map similarity index 100% rename from drivers/net/bnxt/rte_pmd_bnxt_version.map rename to drivers/net/bnxt/version.map diff --git a/drivers/net/bonding/rte_pmd_bond_version.map b/drivers/net/bonding/version.map similarity index 100% rename from drivers/net/bonding/rte_pmd_bond_version.map rename to drivers/net/bonding/version.map diff --git a/drivers/net/cxgbe/rte_pmd_cxgbe_version.map b/drivers/net/cxgbe/version.map similarity index 100% rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map rename to drivers/net/cxgbe/version.map diff --git a/drivers/net/dpaa/rte_pmd_dpaa_version.map b/drivers/net/dpaa/version.map similarity index 100% rename from drivers/net/dpaa/rte_pmd_dpaa_version.map rename to drivers/net/dpaa/version.map diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map b/drivers/net/dpaa2/version.map similarity index 100% rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map rename to drivers/net/dpaa2/version.map diff --git a/drivers/net/e1000/rte_pmd_e1000_version.map b/drivers/net/e1000/version.map similarity index 100% rename from drivers/net/e1000/rte_pmd_e1000_version.map rename to drivers/net/e1000/version.map diff --git a/drivers/net/ena/rte_pmd_ena_version.map b/drivers/net/ena/version.map similarity index 100% rename from drivers/net/ena/rte_pmd_ena_version.map rename to drivers/net/ena/version.map diff --git a/drivers/net/enetc/rte_pmd_enetc_version.map b/drivers/net/enetc/version.map similarity index 100% rename from drivers/net/enetc/rte_pmd_enetc_version.map rename to drivers/net/enetc/version.map diff --git a/drivers/net/enic/rte_pmd_enic_version.map b/drivers/net/enic/version.map similarity index 100% rename from drivers/net/enic/rte_pmd_enic_version.map rename to drivers/net/enic/version.map diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/version.map similarity index 100% rename from drivers/net/failsafe/rte_pmd_failsafe_version.map rename to drivers/net/failsafe/version.map diff --git a/drivers/net/fm10k/rte_pmd_fm10k_version.map b/drivers/net/fm10k/version.map similarity index 100% rename from drivers/net/fm10k/rte_pmd_fm10k_version.map rename to drivers/net/fm10k/version.map diff --git a/drivers/net/hinic/rte_pmd_hinic_version.map b/drivers/net/hinic/version.map similarity index 100% rename from drivers/net/hinic/rte_pmd_hinic_version.map rename to drivers/net/hinic/version.map diff --git a/drivers/net/hns3/rte_pmd_hns3_version.map b/drivers/net/hns3/version.map similarity index 100% rename from drivers/net/hns3/rte_pmd_hns3_version.map rename to drivers/net/hns3/version.map diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/version.map similarity index 100% rename from drivers/net/i40e/rte_pmd_i40e_version.map rename to drivers/net/i40e/version.map diff --git a/drivers/net/iavf/rte_pmd_iavf_version.map b/drivers/net/iavf/version.map similarity index 100% rename from drivers/net/iavf/rte_pmd_iavf_version.map rename to drivers/net/iavf/version.map diff --git a/drivers/net/ice/rte_pmd_ice_version.map b/drivers/net/ice/version.map similarity index 100% rename from drivers/net/ice/rte_pmd_ice_version.map rename to drivers/net/ice/version.map diff --git a/drivers/net/igc/rte_pmd_igc_version.map b/drivers/net/igc/version.map similarity index 100% rename from drivers/net/igc/rte_pmd_igc_version.map rename to drivers/net/igc/version.map diff --git a/drivers/net/ionic/rte_pmd_ionic_version.map b/drivers/net/ionic/version.map similarity index 100% rename from drivers/net/ionic/rte_pmd_ionic_version.map rename to drivers/net/ionic/version.map diff --git a/drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map b/drivers/net/ipn3ke/version.map similarity index 100% rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map rename to drivers/net/ipn3ke/version.map diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/version.map similarity index 100% rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map rename to drivers/net/ixgbe/version.map diff --git a/drivers/net/kni/rte_pmd_kni_version.map b/drivers/net/kni/version.map similarity index 100% rename from drivers/net/kni/rte_pmd_kni_version.map rename to drivers/net/kni/version.map diff --git a/drivers/net/liquidio/rte_pmd_liquidio_version.map b/drivers/net/liquidio/version.map similarity index 100% rename from drivers/net/liquidio/rte_pmd_liquidio_version.map rename to drivers/net/liquidio/version.map diff --git a/drivers/net/memif/rte_pmd_memif_version.map b/drivers/net/memif/version.map similarity index 100% rename from drivers/net/memif/rte_pmd_memif_version.map rename to drivers/net/memif/version.map diff --git a/drivers/net/mlx4/rte_pmd_mlx4_version.map b/drivers/net/mlx4/version.map similarity index 100% rename from drivers/net/mlx4/rte_pmd_mlx4_version.map rename to drivers/net/mlx4/version.map diff --git a/drivers/net/mlx5/rte_pmd_mlx5_version.map b/drivers/net/mlx5/version.map similarity index 100% rename from drivers/net/mlx5/rte_pmd_mlx5_version.map rename to drivers/net/mlx5/version.map diff --git a/drivers/net/mvneta/rte_pmd_mvneta_version.map b/drivers/net/mvneta/version.map similarity index 100% rename from drivers/net/mvneta/rte_pmd_mvneta_version.map rename to drivers/net/mvneta/version.map diff --git a/drivers/net/mvpp2/rte_pmd_mvpp2_version.map b/drivers/net/mvpp2/version.map similarity index 100% rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map rename to drivers/net/mvpp2/version.map diff --git a/drivers/net/netvsc/rte_pmd_netvsc_version.map b/drivers/net/netvsc/version.map similarity index 100% rename from drivers/net/netvsc/rte_pmd_netvsc_version.map rename to drivers/net/netvsc/version.map diff --git a/drivers/net/nfb/rte_pmd_nfb_version.map b/drivers/net/nfb/version.map similarity index 100% rename from drivers/net/nfb/rte_pmd_nfb_version.map rename to drivers/net/nfb/version.map diff --git a/drivers/net/nfp/rte_pmd_nfp_version.map b/drivers/net/nfp/version.map similarity index 100% rename from drivers/net/nfp/rte_pmd_nfp_version.map rename to drivers/net/nfp/version.map diff --git a/drivers/net/null/rte_pmd_null_version.map b/drivers/net/null/version.map similarity index 100% rename from drivers/net/null/rte_pmd_null_version.map rename to drivers/net/null/version.map diff --git a/drivers/net/octeontx/rte_pmd_octeontx_version.map b/drivers/net/octeontx/version.map similarity index 100% rename from drivers/net/octeontx/rte_pmd_octeontx_version.map rename to drivers/net/octeontx/version.map diff --git a/drivers/net/octeontx2/rte_pmd_octeontx2_version.map b/drivers/net/octeontx2/version.map similarity index 100% rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map rename to drivers/net/octeontx2/version.map diff --git a/drivers/net/pcap/rte_pmd_pcap_version.map b/drivers/net/pcap/version.map similarity index 100% rename from drivers/net/pcap/rte_pmd_pcap_version.map rename to drivers/net/pcap/version.map diff --git a/drivers/net/pfe/rte_pmd_pfe_version.map b/drivers/net/pfe/version.map similarity index 100% rename from drivers/net/pfe/rte_pmd_pfe_version.map rename to drivers/net/pfe/version.map diff --git a/drivers/net/qede/rte_pmd_qede_version.map b/drivers/net/qede/version.map similarity index 100% rename from drivers/net/qede/rte_pmd_qede_version.map rename to drivers/net/qede/version.map diff --git a/drivers/net/ring/rte_pmd_ring_version.map b/drivers/net/ring/version.map similarity index 100% rename from drivers/net/ring/rte_pmd_ring_version.map rename to drivers/net/ring/version.map diff --git a/drivers/net/sfc/rte_pmd_sfc_version.map b/drivers/net/sfc/version.map similarity index 100% rename from drivers/net/sfc/rte_pmd_sfc_version.map rename to drivers/net/sfc/version.map diff --git a/drivers/net/softnic/rte_pmd_softnic_version.map b/drivers/net/softnic/version.map similarity index 100% rename from drivers/net/softnic/rte_pmd_softnic_version.map rename to drivers/net/softnic/version.map diff --git a/drivers/net/szedata2/rte_pmd_szedata2_version.map b/drivers/net/szedata2/version.map similarity index 100% rename from drivers/net/szedata2/rte_pmd_szedata2_version.map rename to drivers/net/szedata2/version.map diff --git a/drivers/net/tap/rte_pmd_tap_version.map b/drivers/net/tap/version.map similarity index 100% rename from drivers/net/tap/rte_pmd_tap_version.map rename to drivers/net/tap/version.map diff --git a/drivers/net/thunderx/rte_pmd_thunderx_version.map b/drivers/net/thunderx/version.map similarity index 100% rename from drivers/net/thunderx/rte_pmd_thunderx_version.map rename to drivers/net/thunderx/version.map diff --git a/drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map b/drivers/net/vdev_netvsc/version.map similarity index 100% rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map rename to drivers/net/vdev_netvsc/version.map diff --git a/drivers/net/vhost/rte_pmd_vhost_version.map b/drivers/net/vhost/version.map similarity index 100% rename from drivers/net/vhost/rte_pmd_vhost_version.map rename to drivers/net/vhost/version.map diff --git a/drivers/net/virtio/rte_pmd_virtio_version.map b/drivers/net/virtio/version.map similarity index 100% rename from drivers/net/virtio/rte_pmd_virtio_version.map rename to drivers/net/virtio/version.map diff --git a/drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map b/drivers/net/vmxnet3/version.map similarity index 100% rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map rename to drivers/net/vmxnet3/version.map diff --git a/drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map b/drivers/raw/dpaa2_cmdif/version.map similarity index 100% rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map rename to drivers/raw/dpaa2_cmdif/version.map diff --git a/drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map b/drivers/raw/dpaa2_qdma/version.map similarity index 100% rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map rename to drivers/raw/dpaa2_qdma/version.map diff --git a/drivers/raw/ifpga/rte_rawdev_ifpga_version.map b/drivers/raw/ifpga/version.map similarity index 100% rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map rename to drivers/raw/ifpga/version.map diff --git a/drivers/raw/ioat/rte_rawdev_ioat_version.map b/drivers/raw/ioat/version.map similarity index 100% rename from drivers/raw/ioat/rte_rawdev_ioat_version.map rename to drivers/raw/ioat/version.map diff --git a/drivers/raw/ntb/rte_rawdev_ntb_version.map b/drivers/raw/ntb/version.map similarity index 100% rename from drivers/raw/ntb/rte_rawdev_ntb_version.map rename to drivers/raw/ntb/version.map diff --git a/drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map b/drivers/raw/octeontx2_dma/version.map similarity index 100% rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map rename to drivers/raw/octeontx2_dma/version.map diff --git a/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map b/drivers/raw/octeontx2_ep/version.map similarity index 100% rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map rename to drivers/raw/octeontx2_ep/version.map diff --git a/drivers/raw/skeleton/rte_rawdev_skeleton_version.map b/drivers/raw/skeleton/version.map similarity index 100% rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map rename to drivers/raw/skeleton/version.map diff --git a/drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map b/drivers/regex/mlx5/version.map similarity index 100% rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map rename to drivers/regex/mlx5/version.map diff --git a/drivers/vdpa/ifc/rte_pmd_ifc_version.map b/drivers/vdpa/ifc/version.map similarity index 100% rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map rename to drivers/vdpa/ifc/version.map diff --git a/drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map b/drivers/vdpa/mlx5/version.map similarity index 100% rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map rename to drivers/vdpa/mlx5/version.map diff --git a/lib/librte_acl/rte_acl_version.map b/lib/librte_acl/version.map similarity index 100% rename from lib/librte_acl/rte_acl_version.map rename to lib/librte_acl/version.map diff --git a/lib/librte_bbdev/rte_bbdev_version.map b/lib/librte_bbdev/version.map similarity index 100% rename from lib/librte_bbdev/rte_bbdev_version.map rename to lib/librte_bbdev/version.map diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/version.map similarity index 100% rename from lib/librte_bitratestats/rte_bitratestats_version.map rename to lib/librte_bitratestats/version.map diff --git a/lib/librte_bpf/rte_bpf_version.map b/lib/librte_bpf/version.map similarity index 100% rename from lib/librte_bpf/rte_bpf_version.map rename to lib/librte_bpf/version.map diff --git a/lib/librte_cfgfile/rte_cfgfile_version.map b/lib/librte_cfgfile/version.map similarity index 100% rename from lib/librte_cfgfile/rte_cfgfile_version.map rename to lib/librte_cfgfile/version.map diff --git a/lib/librte_cmdline/rte_cmdline_version.map b/lib/librte_cmdline/version.map similarity index 100% rename from lib/librte_cmdline/rte_cmdline_version.map rename to lib/librte_cmdline/version.map diff --git a/lib/librte_compressdev/rte_compressdev_version.map b/lib/librte_compressdev/version.map similarity index 100% rename from lib/librte_compressdev/rte_compressdev_version.map rename to lib/librte_compressdev/version.map diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/version.map similarity index 100% rename from lib/librte_cryptodev/rte_cryptodev_version.map rename to lib/librte_cryptodev/version.map diff --git a/lib/librte_distributor/rte_distributor_version.map b/lib/librte_distributor/version.map similarity index 100% rename from lib/librte_distributor/rte_distributor_version.map rename to lib/librte_distributor/version.map diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/version.map similarity index 100% rename from lib/librte_eal/rte_eal_version.map rename to lib/librte_eal/version.map diff --git a/lib/librte_efd/rte_efd_version.map b/lib/librte_efd/version.map similarity index 100% rename from lib/librte_efd/rte_efd_version.map rename to lib/librte_efd/version.map diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/version.map similarity index 100% rename from lib/librte_ethdev/rte_ethdev_version.map rename to lib/librte_ethdev/version.map diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/version.map similarity index 100% rename from lib/librte_eventdev/rte_eventdev_version.map rename to lib/librte_eventdev/version.map diff --git a/lib/librte_fib/rte_fib_version.map b/lib/librte_fib/version.map similarity index 100% rename from lib/librte_fib/rte_fib_version.map rename to lib/librte_fib/version.map diff --git a/lib/librte_flow_classify/rte_flow_classify_version.map b/lib/librte_flow_classify/version.map similarity index 100% rename from lib/librte_flow_classify/rte_flow_classify_version.map rename to lib/librte_flow_classify/version.map diff --git a/lib/librte_graph/rte_graph_version.map b/lib/librte_graph/version.map similarity index 100% rename from lib/librte_graph/rte_graph_version.map rename to lib/librte_graph/version.map diff --git a/lib/librte_gro/rte_gro_version.map b/lib/librte_gro/version.map similarity index 100% rename from lib/librte_gro/rte_gro_version.map rename to lib/librte_gro/version.map diff --git a/lib/librte_gso/rte_gso_version.map b/lib/librte_gso/version.map similarity index 100% rename from lib/librte_gso/rte_gso_version.map rename to lib/librte_gso/version.map diff --git a/lib/librte_hash/rte_hash_version.map b/lib/librte_hash/version.map similarity index 100% rename from lib/librte_hash/rte_hash_version.map rename to lib/librte_hash/version.map diff --git a/lib/librte_ip_frag/rte_ip_frag_version.map b/lib/librte_ip_frag/version.map similarity index 100% rename from lib/librte_ip_frag/rte_ip_frag_version.map rename to lib/librte_ip_frag/version.map diff --git a/lib/librte_ipsec/rte_ipsec_version.map b/lib/librte_ipsec/version.map similarity index 100% rename from lib/librte_ipsec/rte_ipsec_version.map rename to lib/librte_ipsec/version.map diff --git a/lib/librte_jobstats/rte_jobstats_version.map b/lib/librte_jobstats/version.map similarity index 100% rename from lib/librte_jobstats/rte_jobstats_version.map rename to lib/librte_jobstats/version.map diff --git a/lib/librte_kni/rte_kni_version.map b/lib/librte_kni/version.map similarity index 100% rename from lib/librte_kni/rte_kni_version.map rename to lib/librte_kni/version.map diff --git a/lib/librte_kvargs/rte_kvargs_version.map b/lib/librte_kvargs/version.map similarity index 100% rename from lib/librte_kvargs/rte_kvargs_version.map rename to lib/librte_kvargs/version.map diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/version.map similarity index 100% rename from lib/librte_latencystats/rte_latencystats_version.map rename to lib/librte_latencystats/version.map diff --git a/lib/librte_lpm/rte_lpm_version.map b/lib/librte_lpm/version.map similarity index 100% rename from lib/librte_lpm/rte_lpm_version.map rename to lib/librte_lpm/version.map diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/version.map similarity index 100% rename from lib/librte_mbuf/rte_mbuf_version.map rename to lib/librte_mbuf/version.map diff --git a/lib/librte_member/rte_member_version.map b/lib/librte_member/version.map similarity index 100% rename from lib/librte_member/rte_member_version.map rename to lib/librte_member/version.map diff --git a/lib/librte_mempool/rte_mempool_version.map b/lib/librte_mempool/version.map similarity index 100% rename from lib/librte_mempool/rte_mempool_version.map rename to lib/librte_mempool/version.map diff --git a/lib/librte_meter/rte_meter_version.map b/lib/librte_meter/version.map similarity index 100% rename from lib/librte_meter/rte_meter_version.map rename to lib/librte_meter/version.map diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/version.map similarity index 100% rename from lib/librte_metrics/rte_metrics_version.map rename to lib/librte_metrics/version.map diff --git a/lib/librte_net/rte_net_version.map b/lib/librte_net/version.map similarity index 100% rename from lib/librte_net/rte_net_version.map rename to lib/librte_net/version.map diff --git a/lib/librte_node/rte_node_version.map b/lib/librte_node/version.map similarity index 100% rename from lib/librte_node/rte_node_version.map rename to lib/librte_node/version.map diff --git a/lib/librte_pci/rte_pci_version.map b/lib/librte_pci/version.map similarity index 100% rename from lib/librte_pci/rte_pci_version.map rename to lib/librte_pci/version.map diff --git a/lib/librte_pdump/rte_pdump_version.map b/lib/librte_pdump/version.map similarity index 100% rename from lib/librte_pdump/rte_pdump_version.map rename to lib/librte_pdump/version.map diff --git a/lib/librte_pipeline/rte_pipeline_version.map b/lib/librte_pipeline/version.map similarity index 100% rename from lib/librte_pipeline/rte_pipeline_version.map rename to lib/librte_pipeline/version.map diff --git a/lib/librte_port/rte_port_version.map b/lib/librte_port/version.map similarity index 100% rename from lib/librte_port/rte_port_version.map rename to lib/librte_port/version.map diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/version.map similarity index 100% rename from lib/librte_power/rte_power_version.map rename to lib/librte_power/version.map diff --git a/lib/librte_rawdev/rte_rawdev_version.map b/lib/librte_rawdev/version.map similarity index 100% rename from lib/librte_rawdev/rte_rawdev_version.map rename to lib/librte_rawdev/version.map diff --git a/lib/librte_rcu/rte_rcu_version.map b/lib/librte_rcu/version.map similarity index 100% rename from lib/librte_rcu/rte_rcu_version.map rename to lib/librte_rcu/version.map diff --git a/lib/librte_regexdev/rte_regexdev_version.map b/lib/librte_regexdev/version.map similarity index 100% rename from lib/librte_regexdev/rte_regexdev_version.map rename to lib/librte_regexdev/version.map diff --git a/lib/librte_reorder/rte_reorder_version.map b/lib/librte_reorder/version.map similarity index 100% rename from lib/librte_reorder/rte_reorder_version.map rename to lib/librte_reorder/version.map diff --git a/lib/librte_rib/rte_rib_version.map b/lib/librte_rib/version.map similarity index 100% rename from lib/librte_rib/rte_rib_version.map rename to lib/librte_rib/version.map diff --git a/lib/librte_ring/rte_ring_version.map b/lib/librte_ring/version.map similarity index 100% rename from lib/librte_ring/rte_ring_version.map rename to lib/librte_ring/version.map diff --git a/lib/librte_sched/rte_sched_version.map b/lib/librte_sched/version.map similarity index 100% rename from lib/librte_sched/rte_sched_version.map rename to lib/librte_sched/version.map diff --git a/lib/librte_security/rte_security_version.map b/lib/librte_security/version.map similarity index 100% rename from lib/librte_security/rte_security_version.map rename to lib/librte_security/version.map diff --git a/lib/librte_stack/rte_stack_version.map b/lib/librte_stack/version.map similarity index 100% rename from lib/librte_stack/rte_stack_version.map rename to lib/librte_stack/version.map diff --git a/lib/librte_table/rte_table_version.map b/lib/librte_table/version.map similarity index 100% rename from lib/librte_table/rte_table_version.map rename to lib/librte_table/version.map diff --git a/lib/librte_telemetry/rte_telemetry_version.map b/lib/librte_telemetry/version.map similarity index 100% rename from lib/librte_telemetry/rte_telemetry_version.map rename to lib/librte_telemetry/version.map diff --git a/lib/librte_timer/rte_timer_version.map b/lib/librte_timer/version.map similarity index 100% rename from lib/librte_timer/rte_timer_version.map rename to lib/librte_timer/version.map diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/version.map similarity index 100% rename from lib/librte_vhost/rte_vhost_version.map rename to lib/librte_vhost/version.map diff --git a/lib/meson.build b/lib/meson.build index d8b358e5f4..3ea26db204 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -138,8 +138,8 @@ foreach l:libraries # RTE_BUILD_SHARED_LIB defined cflags += '-DRTE_BUILD_SHARED_LIB' endif - version_map = '@0@/@1@/rte_@2@_version.map'.format( - meson.current_source_dir(), dir_name, name) + version_map = '@0@/@1@/version.map'.format( + meson.current_source_dir(), dir_name) implib = dir_name + '.dll.a' def_file = custom_target(libname + '_def', -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 6/8] build: standardize component names and defines 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (4 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 5/8] build: remove library name from version map filename Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 7/8] build: replace use of old build macros Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 8/8] [v21.02] build: remove compatibility build defines Bruce Richardson 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros. Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'. Similarly, for libraries, the equivalent name formats and macros are: 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc. To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u --- app/test-bbdev/meson.build | 4 ++-- app/test-crypto-perf/meson.build | 2 +- app/test-pmd/meson.build | 12 ++++++------ app/test/meson.build | 8 ++++---- doc/guides/rel_notes/deprecation.rst | 8 ++++++++ drivers/baseband/meson.build | 1 - drivers/bus/meson.build | 1 - drivers/common/meson.build | 1 - drivers/common/mlx5/meson.build | 1 - drivers/common/qat/meson.build | 1 - drivers/compress/meson.build | 1 - drivers/compress/octeontx/meson.build | 2 +- drivers/crypto/meson.build | 1 - drivers/crypto/null/meson.build | 2 +- drivers/crypto/octeontx/meson.build | 2 +- drivers/crypto/octeontx2/meson.build | 2 +- drivers/crypto/scheduler/meson.build | 2 +- drivers/crypto/virtio/meson.build | 2 +- drivers/event/dpaa/meson.build | 2 +- drivers/event/dpaa2/meson.build | 2 +- drivers/event/meson.build | 1 - drivers/event/octeontx/meson.build | 2 +- drivers/event/octeontx2/meson.build | 2 +- drivers/mempool/meson.build | 1 - drivers/meson.build | 9 ++++----- drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- drivers/raw/ifpga/meson.build | 2 +- drivers/raw/meson.build | 1 - drivers/regex/meson.build | 1 - drivers/vdpa/meson.build | 1 - examples/bond/meson.build | 2 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/l2fwd-crypto/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vm_power_manager/meson.build | 6 +++--- lib/librte_ethdev/meson.build | 1 - lib/librte_graph/meson.build | 2 -- lib/meson.build | 3 ++- 40 files changed, 47 insertions(+), 55 deletions(-) diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 18ab6a8c6c..178306b08c 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -7,8 +7,8 @@ sources = files('main.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') - deps += ['pmd_bbdev_fpga_lte_fec'] + deps += ['baseband_fpga_lte_fec'] endif if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') - deps += ['pmd_bbdev_fpga_5gnr_fec'] + deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index 4bd71510dc..e6ddda6f0c 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -13,5 +13,5 @@ sources = files('cperf_ops.c', 'main.c') deps += ['cryptodev', 'net', 'security'] if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 0d9e450494..2e8b9f8a99 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') deps += 'latencystats' endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - deps += 'pmd_bond' + deps += 'net_bond' endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += 'pmd_bnxt' + deps += 'net_bnxt' endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += 'pmd_i40e' + deps += 'net_i40e' endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') - deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa'] + deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif if dpdk_conf.has('RTE_LIBRTE_BPF') sources += files('bpf_cmd.c') diff --git a/app/test/meson.build b/app/test/meson.build index 781555f9de..d3ae9c91ac 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -344,10 +344,10 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') test_deps += 'mempool_stack' endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') - test_deps += 'pmd_skeleton_event' + test_deps += 'event_skeleton' endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - test_deps += 'pmd_crypto_scheduler' + test_deps += 'crypto_scheduler' endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += 'test_telemetry_json.c' @@ -357,7 +357,7 @@ endif # The following linkages of drivers are required because # they are used via a driver-specific API. if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - test_deps += 'pmd_bond' + test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] if dpdk_conf.has('RTE_LIBRTE_RING_PMD') @@ -366,7 +366,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') endif endif if dpdk_conf.has('RTE_LIBRTE_RING_PMD') - test_deps += 'pmd_ring' + test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' test_sources += 'test_event_eth_tx_adapter.c' diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 0be208edca..dafabdfaa5 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,6 +11,14 @@ here. Deprecation Notices ------------------- +* build: The macros defined to indicate which DPDK libraries and drivers + are included in the meson build are changing to a standardized format of + ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the + upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the + upper-case name of the device class to which a driver belongs e.g. + ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be + removed in a future release. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build index 415b6724b1..7e1b64ffdd 100644 --- a/drivers/baseband/meson.build +++ b/drivers/baseband/meson.build @@ -8,4 +8,3 @@ endif drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec'] config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' -driver_name_fmt = 'rte_pmd_bbdev_@0@' diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build index 80de2d91d5..bd73efd187 100644 --- a/drivers/bus/meson.build +++ b/drivers/bus/meson.build @@ -4,4 +4,3 @@ drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' -driver_name_fmt = 'rte_bus_@0@' diff --git a/drivers/common/meson.build b/drivers/common/meson.build index abb4f1529a..d78882f05e 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -8,4 +8,3 @@ endif std_deps = ['eal'] drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/mlx5/meson.build b/drivers/common/mlx5/meson.build index 8e5608703e..3dacc6f683 100644 --- a/drivers/common/mlx5/meson.build +++ b/drivers/common/mlx5/meson.build @@ -8,7 +8,6 @@ if not is_linux endif config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mlx5_devx_cmds.c', diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 3409162d03..fdf8b84f89 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -2,7 +2,6 @@ # Copyright(c) 2017-2018 Intel Corporation config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' qat_crypto = true qat_crypto_path = 'crypto/qat' diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index 3a4723c0ce..33f5e33dde 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/compress/octeontx/meson.build b/drivers/compress/octeontx/meson.build index 0dc98b7627..2d71b4da21 100644 --- a/drivers/compress/octeontx/meson.build +++ b/drivers/compress/octeontx/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cavium, Inc -name = 'octeontx_compress' +fmt_name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index bd7a940e6d..fa5c7ef3a5 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,4 +26,3 @@ drivers = ['aesni_gcm', std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/null/meson.build b/drivers/crypto/null/meson.build index 502336da2b..421414916c 100644 --- a/drivers/crypto/null/meson.build +++ b/drivers/crypto/null/meson.build @@ -2,5 +2,5 @@ # Copyright(c) 2017 Intel Corporation deps += 'bus_vdev' -name = 'null_crypto' +fmt_name = 'null_crypto' sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c') diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build index cf031b006c..d6939720d8 100644 --- a/drivers/crypto/octeontx/meson.build +++ b/drivers/crypto/octeontx/meson.build @@ -7,7 +7,7 @@ endif deps += ['bus_pci'] deps += ['common_cpt'] -name = 'octeontx_crypto' +fmt_name = 'octeontx_crypto' sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build index 148ec184a6..bf502e247d 100644 --- a/drivers/crypto/octeontx2/meson.build +++ b/drivers/crypto/octeontx2/meson.build @@ -11,7 +11,7 @@ deps += ['common_cpt'] deps += ['common_octeontx2'] deps += ['ethdev'] deps += ['security'] -name = 'octeontx2_crypto' +fmt_name = 'octeontx2_crypto' sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', diff --git a/drivers/crypto/scheduler/meson.build b/drivers/crypto/scheduler/meson.build index c5ba2d6804..2209c50232 100644 --- a/drivers/crypto/scheduler/meson.build +++ b/drivers/crypto/scheduler/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Luca Boccassi <bluca@debian.org> deps += ['bus_vdev', 'reorder'] -name = 'crypto_scheduler' +fmt_name = 'crypto_scheduler' sources = files( 'rte_cryptodev_scheduler.c', 'scheduler_failover.c', diff --git a/drivers/crypto/virtio/meson.build b/drivers/crypto/virtio/meson.build index b15b3f9fab..6cea782deb 100644 --- a/drivers/crypto/virtio/meson.build +++ b/drivers/crypto/virtio/meson.build @@ -3,6 +3,6 @@ includes += include_directories('../../../lib/librte_vhost') deps += 'bus_pci' -name = 'virtio_crypto' +fmt_name = 'virtio_crypto' sources = files('virtio_cryptodev.c', 'virtio_pci.c', 'virtio_rxtx.c', 'virtqueue.c') diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build index 2f761f8e5b..9abb75e3e9 100644 --- a/drivers/event/dpaa/meson.build +++ b/drivers/event/dpaa/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['pmd_dpaa', 'pmd_dpaa_sec'] +deps += ['net_dpaa', 'crypto_dpaa_sec'] sources = files('dpaa_eventdev.c') includes += include_directories('../../crypto/dpaa_sec/') diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build index 71c8be3d6e..4ead7bb3e9 100644 --- a/drivers/event/dpaa2/meson.build +++ b/drivers/event/dpaa2/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec'] +deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec'] sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') diff --git a/drivers/event/meson.build b/drivers/event/meson.build index f2a3431472..a7dac99de2 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and endif std_deps = ['eventdev', 'kvargs'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' -driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/event/octeontx/meson.build b/drivers/event/octeontx/meson.build index 2b74bb62de..41e367684c 100644 --- a/drivers/event/octeontx/meson.build +++ b/drivers/event/octeontx/meson.build @@ -10,4 +10,4 @@ sources = files('ssovf_worker.c', 'timvf_probe.c' ) -deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx'] +deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx'] diff --git a/drivers/event/octeontx2/meson.build b/drivers/event/octeontx2/meson.build index 0ade51cec7..3e5eb37d24 100644 --- a/drivers/event/octeontx2/meson.build +++ b/drivers/event/octeontx2/meson.build @@ -24,6 +24,6 @@ foreach flag: extra_flags endif endforeach -deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2'] +deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2'] includes += include_directories('../../crypto/octeontx2') diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build index c9609f1453..036647149e 100644 --- a/drivers/mempool/meson.build +++ b/drivers/mempool/meson.build @@ -8,4 +8,3 @@ endif drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack'] std_deps = ['mempool'] config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' -driver_name_fmt = 'rte_mempool_@0@' diff --git a/drivers/meson.build b/drivers/meson.build index 3d4bbff13b..a5a6fed06e 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -33,9 +33,6 @@ foreach subpath:subdirs drivers = [] std_deps = [] config_flag_fmt = '' # format string used to set the value in dpdk_conf - driver_name_fmt = '' # format string for driver name, used to name - # the library, the dependency and to find the - # version file for linking # subpath can be either "class" or "class/driver" if subpath.contains('/') @@ -113,11 +110,14 @@ foreach subpath:subdirs endif else enabled_drivers += name + lib_name = '_'.join(['rte', class, name]) + dpdk_conf.set(lib_name.to_upper(), 1) if fmt_name == '' fmt_name = name endif - dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + + dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro # for driver compatibility, since we changed the # default to match that of make. Remove in future release # after following deprecation process @@ -133,7 +133,6 @@ foreach subpath:subdirs dpdk_conf.set(alt_flag_fmt.format( fmt_name.to_upper()), 1) endif - lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs diff --git a/drivers/net/meson.build b/drivers/net/meson.build index d56b24051a..4e4c2c976a 100644 --- a/drivers/net/meson.build +++ b/drivers/net/meson.build @@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std std_deps += ['bus_vdev'] # same with vdev bus config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/net/mlx4/meson.build b/drivers/net/mlx4/meson.build index 5a25e11a7b..4040065150 100644 --- a/drivers/net/mlx4/meson.build +++ b/drivers/net/mlx4/meson.build @@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config) # Build Glue Library if dlopen_ibverbs dlopen_name = 'mlx4_glue' - dlopen_lib_name = driver_name_fmt.format(dlopen_name) + dlopen_lib_name = 'rte_net_' + dlopen_name dlopen_so_version = LIB_GLUE_VERSION dlopen_sources = files('mlx4_glue.c') dlopen_install_dir = [ eal_pmd_path + '-glue' ] diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build index da454b1942..027ff80562 100644 --- a/drivers/raw/ifpga/meson.build +++ b/drivers/raw/ifpga/meson.build @@ -11,7 +11,7 @@ subdir('base') objs = [base_objs] deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs', - 'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke'] + 'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke'] sources = files('ifpga_rawdev.c') diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build index 2c1e65ec79..d8d6cf5824 100644 --- a/drivers/raw/meson.build +++ b/drivers/raw/meson.build @@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma', 'skeleton'] std_deps = ['rawdev'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' -driver_name_fmt = 'rte_rawdev_@0@' diff --git a/drivers/regex/meson.build b/drivers/regex/meson.build index 8edeba3a0a..f171e9fdf0 100644 --- a/drivers/regex/meson.build +++ b/drivers/regex/meson.build @@ -4,4 +4,3 @@ drivers = ['mlx5'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/vdpa/meson.build b/drivers/vdpa/meson.build index 798eb38305..b346e43086 100644 --- a/drivers/vdpa/meson.build +++ b/drivers/vdpa/meson.build @@ -10,4 +10,3 @@ drivers = ['ifc', std_deps = ['bus_pci', 'kvargs'] std_deps += ['vhost'] config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/examples/bond/meson.build b/examples/bond/meson.build index 82e355a492..69382ffcd2 100644 --- a/examples/bond/meson.build +++ b/examples/bond/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -deps += 'pmd_bond' +deps += 'net_bond' allow_experimental_apis = true sources = files( 'main.c' diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index bc7a35514c..fdfdd1971e 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif allow_experimental_apis = true diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f72cf70e7e..f1a045a0a6 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -9,7 +9,7 @@ allow_experimental_apis = true build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') -deps += ['rawdev_ioat'] +deps += ['raw_ioat'] sources = files( 'ioatfwd.c' diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 39e1604fac..9002d62a6c 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -8,7 +8,7 @@ deps += 'cryptodev' if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif allow_experimental_apis = true sources = files( diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index 45a59350c5..bac6e5cd23 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -16,5 +16,5 @@ sources = files( 'ntb_fwd.c' ) if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') - deps += 'rawdev_ntb' + deps += 'raw_ntb' endif diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 54e2b584f6..2dd132015f 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -14,15 +14,15 @@ endif deps += ['power'] if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += ['pmd_bnxt'] + deps += ['net_bnxt'] endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += ['pmd_i40e'] + deps += ['net_i40e'] endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += ['pmd_ixgbe'] + deps += ['net_ixgbe'] endif allow_experimental_apis = true diff --git a/lib/librte_ethdev/meson.build b/lib/librte_ethdev/meson.build index 8fc24e8c8a..e4b610246f 100644 --- a/lib/librte_ethdev/meson.build +++ b/lib/librte_ethdev/meson.build @@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -name = 'ethdev' sources = files('ethdev_private.c', 'ethdev_profile.c', 'ethdev_trace_points.c', diff --git a/lib/librte_graph/meson.build b/lib/librte_graph/meson.build index d5de1e250a..d3ec78ca62 100644 --- a/lib/librte_graph/meson.build +++ b/lib/librte_graph/meson.build @@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(C) 2020 Marvell International Ltd. -name = 'graph' - sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c') headers = files('rte_graph.h', 'rte_graph_worker.h') diff --git a/lib/meson.build b/lib/meson.build index 3ea26db204..38678a7fb5 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -97,7 +97,8 @@ foreach l:libraries set_variable(name.underscorify() + '_disable_reason', reason) else enabled_libs += name - dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) + dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro + dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro install_headers(headers) libname = 'rte_' + name -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 7/8] build: replace use of old build macros 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (5 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 6/8] build: standardize component names and defines Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 8/8] [v21.02] build: remove compatibility build defines Bruce Richardson 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 4 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 2 +- app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 22 +- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 26 +-- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- drivers/net/kni/meson.build | 2 +- drivers/net/netvsc/meson.build | 2 +- drivers/net/vhost/meson.build | 2 +- drivers/raw/dpaa2_cmdif/meson.build | 2 +- drivers/raw/dpaa2_qdma/meson.build | 2 +- drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/vdpa/ifc/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 2 +- examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 8 +- lib/librte_eal/linux/eal.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- lib/librte_port/meson.build | 2 +- lib/meson.build | 2 +- 85 files changed, 391 insertions(+), 391 deletions(-) diff --git a/app/proc-info/main.c b/app/proc-info/main.c index 64fb83b38d..0fea033bb5 100644 --- a/app/proc-info/main.c +++ b/app/proc-info/main.c @@ -30,7 +30,7 @@ #include <rte_string_fns.h> #include <rte_metrics.h> #include <rte_cycles.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif #include <rte_cryptodev.h> @@ -739,7 +739,7 @@ show_port(void) } printf(" - cyrpto context\n"); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY void *p_ctx = rte_eth_dev_get_sec_ctx(i); printf("\t -- security context - %p\n", p_ctx); diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 178306b08c..a2bd7dca6b 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -6,9 +6,9 @@ sources = files('main.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_LTE_FEC') deps += ['baseband_fpga_lte_fec'] endif -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_5GNR_FEC') deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c index 45c0d62aca..2e85eccf94 100644 --- a/app/test-bbdev/test_bbdev_perf.c +++ b/app/test-bbdev/test_bbdev_perf.c @@ -26,7 +26,7 @@ #define MAX_QUEUES RTE_MAX_LCORE #define TEST_REPETITIONS 1000 -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC #include <fpga_lte_fec.h> #define FPGA_LTE_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf") #define FPGA_LTE_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf") @@ -39,7 +39,7 @@ #define FLR_4G_TIMEOUT 610 #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC #include <rte_pmd_fpga_5gnr_fec.h> #define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf") #define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf") @@ -565,7 +565,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, /* Configure fpga lte fec with PF & VF values * if '-i' flag is set and using fpga device */ -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_LTE_PF_DRIVER_NAME))) { struct fpga_lte_fec_conf conf; @@ -609,7 +609,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, info->dev_name); } #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) { struct fpga_5gnr_fec_conf conf; diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c index 3da835a9c5..cc45af7f22 100644 --- a/app/test-crypto-perf/cperf_ops.c +++ b/app/test-crypto-perf/cperf_ops.c @@ -8,7 +8,7 @@ #include "cperf_ops.h" #include "cperf_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int cperf_set_ops_security(struct rte_crypto_op **ops, uint32_t src_buf_offset __rte_unused, @@ -551,7 +551,7 @@ cperf_create_session(struct rte_mempool *sess_mp, struct rte_crypto_sym_xform aead_xform; struct rte_cryptodev_sym_session *sess = NULL; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * security only */ @@ -844,7 +844,7 @@ cperf_get_op_functions(const struct cperf_options *options, op_fns->populate_ops = cperf_set_ops_cipher; return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_PDCP) { op_fns->populate_ops = cperf_set_ops_security; return 0; diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-perf/cperf_options.h index 256fabb072..9664a4b343 100644 --- a/app/test-crypto-perf/cperf_options.h +++ b/app/test-crypto-perf/cperf_options.h @@ -7,7 +7,7 @@ #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -47,7 +47,7 @@ #define CPERF_DIGEST_SZ ("digest-sz") -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define CPERF_PDCP_SN_SZ ("pdcp-sn-sz") #define CPERF_PDCP_DOMAIN ("pdcp-domain") #define CPERF_PDCP_SES_HFN_EN ("pdcp-ses-hfn-en") @@ -123,7 +123,7 @@ struct cperf_options { uint16_t digest_sz; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint16_t pdcp_sn_sz; uint16_t pdcp_ses_hfn_en; enum rte_security_pdcp_domain pdcp_domain; diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c index 8e086f88ec..03ed6f5942 100644 --- a/app/test-crypto-perf/cperf_options_parsing.c +++ b/app/test-crypto-perf/cperf_options_parsing.c @@ -57,7 +57,7 @@ usage(char *progname) " --pmd-cyclecount-delay-ms N: set delay between enqueue\n" " and dequeue in pmd-cyclecount benchmarking mode\n" " --csv-friendly: enable test result output CSV friendly\n" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY " --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n" " --pdcp-domain DOMAIN: set PDCP domain <control/user>\n" " --pdcp-ses-hfn-en: enable session based fixed HFN\n" @@ -631,7 +631,7 @@ parse_digest_sz(struct cperf_options *opts, const char *arg) return parse_uint16_t(&opts->digest_sz, arg); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int parse_pdcp_sn_sz(struct cperf_options *opts, const char *arg) { @@ -841,7 +841,7 @@ static struct option lgopts[] = { { CPERF_DIGEST_SZ, required_argument, 0, 0 }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, required_argument, 0, 0 }, { CPERF_PDCP_DOMAIN, required_argument, 0, 0 }, { CPERF_PDCP_SES_HFN_EN, no_argument, 0, 0 }, @@ -913,7 +913,7 @@ cperf_options_default(struct cperf_options *opts) opts->digest_sz = 12; opts->pmdcc_delay = 0; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY opts->pdcp_sn_sz = 12; opts->pdcp_domain = RTE_SECURITY_PDCP_MODE_CONTROL; opts->pdcp_ses_hfn_en = 0; @@ -954,7 +954,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts) { CPERF_AEAD_IV_SZ, parse_aead_iv_sz }, { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz }, { CPERF_DIGEST_SZ, parse_digest_sz }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, parse_pdcp_sn_sz }, { CPERF_PDCP_DOMAIN, parse_pdcp_domain }, { CPERF_PDCP_SES_HFN_EN, parse_pdcp_ses_hfn_en }, @@ -1061,7 +1061,7 @@ check_cipher_buffer_length(struct cperf_options *options) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int check_docsis_buffer_length(struct cperf_options *options) { @@ -1215,7 +1215,7 @@ cperf_options_check(struct cperf_options *options) return -EINVAL; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_DOCSIS) { if (check_docsis_buffer_length(options) < 0) return -EINVAL; @@ -1308,7 +1308,7 @@ cperf_options_dump(struct cperf_options *opts) printf("#\n"); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (opts->op_type == CPERF_DOCSIS) { printf("# docsis header size: %u\n", opts->docsis_hdr_sz); printf("#\n"); diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c index 69f0943d14..4e67d3aebd 100644 --- a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c @@ -63,7 +63,7 @@ cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-perf/cperf_test_throughput.c index 12d9ea4f9f..f30f7d5c2c 100644 --- a/app/test-crypto-perf/cperf_test_throughput.c +++ b/app/test-crypto-perf/cperf_test_throughput.c @@ -35,7 +35,7 @@ cperf_throughput_test_free(struct cperf_throughput_ctx *ctx) if (!ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/main.c b/app/test-crypto-perf/main.c index 8f8e580e4d..f4f7e31c92 100644 --- a/app/test-crypto-perf/main.c +++ b/app/test-crypto-perf/main.c @@ -9,7 +9,7 @@ #include <rte_random.h> #include <rte_eal.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -170,7 +170,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) for (i = 0; i < enabled_cdev_count && i < RTE_CRYPTO_MAX_DEVS; i++) { cdev_id = enabled_cdevs[i]; -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* * If multi-core scheduler is used, limit the number * of queue pairs to 1, as there is no way to know @@ -238,7 +238,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) */ if (!strcmp((const char *)opts->device_type, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index e6ddda6f0c..558c648788 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,6 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif diff --git a/app/test-pipeline/main.c b/app/test-pipeline/main.c index 7f0d6d3f18..c7be5942fa 100644 --- a/app/test-pipeline/main.c +++ b/app/test-pipeline/main.c @@ -126,7 +126,7 @@ app_lcore_main_loop(__rte_unused void *arg) return 0; case e_APP_PIPELINE_ACL: -#ifndef RTE_LIBRTE_ACL +#ifndef RTE_LIB_ACL rte_exit(EXIT_FAILURE, "ACL not present in build\n"); #else app_main_loop_worker_pipeline_acl(); diff --git a/app/test-pmd/bpf_cmd.h b/app/test-pmd/bpf_cmd.h index 5ee4c9f796..66bc706358 100644 --- a/app/test-pmd/bpf_cmd.h +++ b/app/test-pmd/bpf_cmd.h @@ -5,12 +5,12 @@ #ifndef _BPF_CMD_H_ #define _BPF_CMD_H_ -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF /* BPF CLI */ extern cmdline_parse_inst_t cmd_operate_bpf_ld_parse; extern cmdline_parse_inst_t cmd_operate_bpf_unld_parse; -#endif /* RTE_LIBRTE_BPF */ +#endif /* RTE_LIB_BPF */ #endif /* _BPF_CMD_H_ */ diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 524c75b267..3d09083498 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -50,20 +50,20 @@ #include <cmdline_parse_etheraddr.h> #include <cmdline_socket.h> #include <cmdline.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #include <rte_eth_bond_8023ad.h> #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA #include <rte_pmd_dpaa.h> #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include "testpmd.h" @@ -606,7 +606,7 @@ static void cmd_help_long_parsed(void *parsed_result, " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -5448,7 +5448,7 @@ cmd_set_bypass_mode_parsed(void *parsed_result, portid_t port_id = res->port_id; int32_t rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->value, "bypass")) @@ -5516,7 +5516,7 @@ cmd_set_bypass_event_parsed(void *parsed_result, struct cmd_set_bypass_event_result *res = parsed_result; portid_t port_id = res->port_id; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; @@ -5621,7 +5621,7 @@ cmd_set_bypass_timeout_parsed(void *parsed_result, { __rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS if (!strcmp(res->value, "1.5")) bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC; else if (!strcmp(res->value, "2")) @@ -5684,7 +5684,7 @@ cmd_show_bypass_config_parsed(void *parsed_result, struct cmd_show_bypass_config_result *res = parsed_result; portid_t port_id = res->port_id; int rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t event_mode; uint32_t bypass_mode; uint32_t timeout = bypass_timeout; @@ -5767,7 +5767,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = { }, }; -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND /* *** SET BONDING MODE *** */ struct cmd_set_bonding_mode_result { cmdline_fixed_string_t set; @@ -6537,7 +6537,7 @@ cmdline_parse_inst_t cmd_set_bonding_agg_mode_policy = { }; -#endif /* RTE_LIBRTE_PMD_BOND */ +#endif /* RTE_NET_BOND */ /* *** SET FORWARDING MODE *** */ struct cmd_set_fwd_mode_result { @@ -8822,12 +8822,12 @@ cmd_set_vf_rxmode_parsed(void *parsed_result, RTE_SET_USED(is_on); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); @@ -8901,12 +8901,12 @@ static void cmd_vf_mac_addr_parsed(void *parsed_result, if (strcmp(res->what, "add") != 0) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_add_vf_mac_addr(res->port_num, res->vf_num, &res->address); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_mac_addr_add(res->port_num, &res->address, res->vf_num); @@ -8977,17 +8977,17 @@ cmd_vf_rx_vlan_filter_parsed(void *parsed_result, __rte_unused int is_add = (strcmp(res->what, "add") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); @@ -9514,7 +9514,7 @@ cmd_global_config_parsed(void *parsed_result, conf.cfg.gre_key_len = res->len; ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE, RTE_ETH_FILTER_SET, &conf); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_gre_key_len(res->port_id, res->len); #endif @@ -10078,7 +10078,7 @@ cmd_queue_region_parsed(void *parsed_result, { struct cmd_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10086,7 +10086,7 @@ cmd_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_SET; region_conf.region_id = res->region_id; @@ -10177,7 +10177,7 @@ cmd_region_flowtype_parsed(void *parsed_result, { struct cmd_region_flowtype_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10185,7 +10185,7 @@ cmd_region_flowtype_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET; @@ -10268,7 +10268,7 @@ cmd_user_priority_region_parsed(void *parsed_result, { struct cmd_user_priority_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10276,7 +10276,7 @@ cmd_user_priority_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET; region_conf.user_priority = res->user_priority_id; @@ -10359,7 +10359,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, { struct cmd_flush_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10367,7 +10367,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); if (strcmp(res->what, "on") == 0) @@ -10441,7 +10441,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, { struct cmd_show_queue_region_info *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_regions rte_pmd_regions; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10449,7 +10449,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(&rte_pmd_regions, 0, sizeof(rte_pmd_regions)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET; @@ -11345,7 +11345,7 @@ cmd_flow_director_filter_parsed(void *parsed_result, } } else { if (!strcmp(res->mode_value, "raw")) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; struct rte_pmd_i40e_pkt_template_conf conf; @@ -13703,17 +13703,17 @@ cmd_set_vf_vlan_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13809,17 +13809,17 @@ cmd_set_vf_mac_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13915,17 +13915,17 @@ cmd_set_vf_vlan_stripq_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); @@ -14019,17 +14019,17 @@ cmd_set_vf_vlan_insert_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); @@ -14115,19 +14115,19 @@ cmd_set_tx_loopback_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_tx_loopback(res->port_id, is_on); #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA if (ret == -ENOTSUP) ret = rte_pmd_dpaa_set_tx_loopback(res->port_id, is_on); #endif @@ -14214,11 +14214,11 @@ cmd_set_all_queues_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_all_queues_drop_en(res->port_id, is_on); #endif @@ -14310,7 +14310,7 @@ cmd_set_vf_split_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_split_drop_en(res->port_id, res->vf_id, is_on); #endif @@ -14402,17 +14402,17 @@ cmd_set_vf_mac_addr_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); @@ -14529,7 +14529,7 @@ cmd_set_macsec_offload_on_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp); #endif } @@ -14626,7 +14626,7 @@ cmd_set_macsec_offload_off_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_disable(port_id); #endif } @@ -14712,7 +14712,7 @@ cmd_set_macsec_sc_parsed( int ret = -ENOTSUP; int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_config_txsc(res->port_id, res->mac.addr_bytes) : @@ -14831,7 +14831,7 @@ cmd_set_macsec_sa_parsed( key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1); } -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_select_txsa(res->port_id, res->idx, res->an, res->pn, key) : @@ -14928,7 +14928,7 @@ cmd_set_vf_promisc_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_unicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15018,7 +15018,7 @@ cmd_set_vf_allmulti_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_multicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15108,7 +15108,7 @@ cmd_set_vf_broadcast_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_broadcast(res->port_id, res->vf_id, is_on); #endif @@ -15202,7 +15202,7 @@ cmd_set_vf_vlan_tag_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_vlan_tag(res->port_id, res->vf_id, is_on); #endif @@ -15323,7 +15323,7 @@ cmd_vf_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_max_bw(res->port_id, res->vf_id, res->bw); #endif @@ -15423,7 +15423,7 @@ cmd_vf_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_bw_alloc(res->port_id, res->vf_id, tc_num, bw); #endif @@ -15489,7 +15489,7 @@ cmd_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_tc_bw_alloc(res->port_id, tc_num, bw); #endif @@ -15538,7 +15538,7 @@ cmd_vf_tc_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_max_bw(res->port_id, res->vf_id, res->tc_no, res->bw); #endif @@ -16592,7 +16592,7 @@ cmd_strict_link_prio_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_tc_strict_prio(res->port_id, res->tc_map); #endif @@ -16676,7 +16676,7 @@ cmd_ddp_add_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16744,7 +16744,7 @@ cmd_ddp_del_parsed( if (!buff) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16799,7 +16799,7 @@ cmd_ddp_info_parsed( uint8_t *pkg; uint32_t pkg_size; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint32_t i, j, n; uint8_t *buff; uint32_t buff_size = 0; @@ -16820,7 +16820,7 @@ cmd_ddp_info_parsed( if (!pkg) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size, (uint8_t *)&info, sizeof(info), RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER); @@ -17035,7 +17035,7 @@ cmd_ddp_get_list_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_ddp_get_list_result *res = parsed_result; struct rte_pmd_i40e_profile_list *p_list; struct rte_pmd_i40e_profile_info *p_info; @@ -17045,7 +17045,7 @@ cmd_ddp_get_list_parsed( #endif int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E size = PROFILE_INFO_SIZE * MAX_PROFILE_NUM + 4; p_list = (struct rte_pmd_i40e_profile_list *)malloc(size); if (!p_list) { @@ -17113,7 +17113,7 @@ cmd_cfg_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_cfg_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17125,7 +17125,7 @@ cmd_cfg_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17236,7 +17236,7 @@ cmd_clear_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_clear_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17248,7 +17248,7 @@ cmd_clear_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17364,13 +17364,13 @@ cmd_show_vf_stats_parsed( memset(&stats, 0, sizeof(stats)); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_get_vf_stats(res->port_id, res->vf_id, &stats); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_get_vf_stats(res->port_id, res->vf_id, @@ -17469,12 +17469,12 @@ cmd_clear_vf_stats_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_reset_vf_stats(res->port_id, res->vf_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_reset_vf_stats(res->port_id, res->vf_id); @@ -17561,7 +17561,7 @@ cmd_pctype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_reset(res->port_id); #endif @@ -17635,7 +17635,7 @@ cmd_pctype_mapping_get_parsed( { struct cmd_pctype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; int i, j, first_pctype; @@ -17644,7 +17644,7 @@ cmd_pctype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_get(res->port_id, mapping); #endif @@ -17662,7 +17662,7 @@ cmd_pctype_mapping_get_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E for (i = 0; i < RTE_PMD_I40E_FLOW_TYPE_MAX; i++) { if (mapping[i].pctype != 0ULL) { first_pctype = 1; @@ -17751,7 +17751,7 @@ cmd_pctype_mapping_update_parsed( { struct cmd_pctype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping; unsigned int i; unsigned int nb_item; @@ -17761,7 +17761,7 @@ cmd_pctype_mapping_update_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E nb_item = parse_item_list(res->pctype_list, "pctypes", RTE_PMD_I40E_PCTYPE_MAX, pctype_list, 1); mapping.flow_type = res->flow_type; @@ -17849,7 +17849,7 @@ cmd_ptype_mapping_get_parsed( { struct cmd_ptype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E int max_ptype_num = 256; struct rte_pmd_i40e_ptype_mapping mapping[max_ptype_num]; uint16_t count; @@ -17859,7 +17859,7 @@ cmd_ptype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_get(res->port_id, mapping, max_ptype_num, @@ -17880,7 +17880,7 @@ cmd_ptype_mapping_get_parsed( printf("programming error: (%s)\n", strerror(-ret)); } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!ret) { for (i = 0; i < count; i++) printf("%3d\t0x%08x\n", @@ -17958,7 +17958,7 @@ cmd_ptype_mapping_replace_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_replace(res->port_id, res->target, res->mask, @@ -18040,7 +18040,7 @@ cmd_ptype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_reset(res->port_id); #endif @@ -18117,13 +18117,13 @@ cmd_ptype_mapping_update_parsed( { struct cmd_ptype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_ptype_mapping mapping; #endif if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E mapping.hw_ptype = res->hw_ptype; mapping.sw_ptype = res->sw_ptype; ret = rte_pmd_i40e_ptype_mapping_update(res->port_id, @@ -19595,7 +19595,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, (cmdline_parse_inst_t *) &cmd_set_bonding_primary, @@ -19842,7 +19842,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_tx_offload_get_configuration, (cmdline_parse_inst_t *)&cmd_config_per_port_tx_offload, (cmdline_parse_inst_t *)&cmd_config_per_queue_tx_offload, -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF (cmdline_parse_inst_t *)&cmd_operate_bpf_ld_parse, (cmdline_parse_inst_t *)&cmd_operate_bpf_unld_parse, #endif diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 418ea6dda4..ad45b70dc9 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -39,13 +39,13 @@ #include <rte_cycles.h> #include <rte_flow.h> #include <rte_errno.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include <rte_gro.h> @@ -4090,14 +4090,14 @@ get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info, return 0; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) { ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info); if (!ret) ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat); } #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) { ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info); if (!ret) @@ -4250,7 +4250,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg) void set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE int diag; if (is_rx) @@ -4305,12 +4305,12 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk) RTE_SET_USED(rate); RTE_SET_USED(q_msk); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (diag == -ENOTSUP) diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (diag == -ENOTSUP) diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif @@ -4606,7 +4606,7 @@ close_file(uint8_t *buf) void port_queue_region_info_display(portid_t port_id, void *buf) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint16_t i, j; struct rte_pmd_i40e_queue_regions *info = (struct rte_pmd_i40e_queue_regions *)buf; diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 2e8b9f8a99..7e9c7bdd69 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -25,37 +25,37 @@ sources = files('5tswap.c', 'util.c') deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci'] -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') deps += 'pdump' endif -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') +if dpdk_conf.has('RTE_LIB_LATENCYSTATS') deps += 'latencystats' endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') deps += 'net_bond' endif -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += 'net_bnxt' endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += 'net_i40e' endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif -if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') +if dpdk_conf.has('RTE_NET_DPAA') deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif -if dpdk_conf.has('RTE_LIBRTE_BPF') +if dpdk_conf.has('RTE_LIB_BPF') sources += files('bpf_cmd.c') deps += 'bpf' endif diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 1ead59579b..98e6740e62 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -39,7 +39,7 @@ #include <rte_ether.h> #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #endif #include <rte_flow.h> @@ -50,7 +50,7 @@ static void usage(char* progname) { printf("usage: %s [EAL options] -- " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "[--interactive|-i] " "[--cmdline-file=FILENAME] " #endif @@ -60,7 +60,7 @@ usage(char* progname) "--portlist=PORTLIST " "--mbuf-size= | --total-num-mbufs= | " "--nb-cores= | --nb-ports= | " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "--eth-peers-configfile= | " "--eth-peer=X,M:M:M:M:M:M | " "--tx-ip=SRC,DST | --tx-udp=PORT | " @@ -73,7 +73,7 @@ usage(char* progname) "--vxlan-gpe-port= | --record-core-cycles | " "--record-burst-stats]\n", progname); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --interactive: run in interactive mode.\n"); printf(" --cmdline-file: execute cli commands before startup.\n"); #endif @@ -112,7 +112,7 @@ usage(char* progname) printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n"); printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet " "size to N bytes.\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --eth-peers-configfile=name: config file with ethernet addresses " "of peer ports.\n"); printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer " @@ -129,7 +129,7 @@ usage(char* progname) "the packet will be enqueued into the rx drop-queue. " "If the drop-queue doesn't exist, the packet is dropped. " "By default drop-queue=127.\n"); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS printf(" --latencystats=N: enable latency and jitter statistcs " "monitoring on forwarding lcore id N.\n"); #endif @@ -223,7 +223,7 @@ usage(char* progname) printf(" --record-burst-stats: enable display of RX and TX bursts.\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE static int init_peer_eth_addrs(char *config_filename) { @@ -586,7 +586,7 @@ launch_args_parse(int argc, char** argv) static struct option lgopts[] = { { "help", 0, 0, 0 }, -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE { "interactive", 0, 0, 0 }, { "cmdline-file", 1, 0, 0 }, { "auto-start", 0, 0, 0 }, @@ -615,10 +615,10 @@ launch_args_parse(int argc, char** argv) { "pkt-filter-report-hash", 1, 0, 0 }, { "pkt-filter-size", 1, 0, 0 }, { "pkt-filter-drop-queue", 1, 0, 0 }, -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS { "latencystats", 1, 0, 0 }, #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS { "bitrate-stats", 1, 0, 0 }, #endif { "disable-crc-strip", 0, 0, 0 }, @@ -691,7 +691,7 @@ launch_args_parse(int argc, char** argv) argvopt = argv; -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #define SHORTOPTS "i" #else #define SHORTOPTS "" @@ -699,7 +699,7 @@ launch_args_parse(int argc, char** argv) while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah", lgopts, &opt_idx)) != EOF) { switch (opt) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE case 'i': printf("Interactive-mode selected\n"); interactive = 1; @@ -715,7 +715,7 @@ launch_args_parse(int argc, char** argv) usage(argv[0]); rte_exit(EXIT_SUCCESS, "Displayed help\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (!strcmp(lgopts[opt_idx].name, "interactive")) { printf("Interactive-mode selected\n"); interactive = 1; @@ -982,7 +982,7 @@ launch_args_parse(int argc, char** argv) "drop queue %d invalid - must" "be >= 0 \n", n); } -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (!strcmp(lgopts[opt_idx].name, "latencystats")) { n = atoi(optarg); @@ -995,7 +995,7 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) { n = atoi(optarg); if (n >= 0) { diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index ccba71c076..8efe06c64e 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -46,18 +46,18 @@ #include <rte_ethdev.h> #include <rte_dev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include <rte_pdump.h> #endif #include <rte_flow.h> #include <rte_metrics.h> -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS #include <rte_bitrate.h> #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS #include <rte_latencystats.h> #endif @@ -404,13 +404,13 @@ int do_mlockall = 0; * NIC bypass mode configuration options. */ -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS /* The NIC bypass watchdog timeout. */ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS /* * Set when latency stats is enabled in the commandline @@ -488,7 +488,7 @@ uint8_t record_burst_stats; unsigned int num_sockets = 0; unsigned int socket_ids[RTE_MAX_NUMA_NODES]; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS /* Bitrate statistics */ struct rte_stats_bitrates *bitrate_data; lcoreid_t bitrate_lcore_id; @@ -2064,7 +2064,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; @@ -2079,7 +2079,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0 && bitrate_lcore_id == rte_lcore_id()) { tics_current = rte_rdtsc(); @@ -2092,7 +2092,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) } } #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0 && latencystats_lcore_id == rte_lcore_id()) rte_latencystats_update(); @@ -3347,7 +3347,7 @@ init_port_config(void) return; map_port_queue_stats_mapping_registers(pid, port); -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS rte_pmd_ixgbe_bypass_init(pid); #endif @@ -3613,11 +3613,11 @@ signal_handler(int signum) if (signum == SIGINT || signum == SIGTERM) { printf("\nSignal %d received, preparing to exit...\n", signum); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* uninitialize packet capture framework */ rte_pdump_uninit(); #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif @@ -3659,7 +3659,7 @@ main(int argc, char** argv) if (ret != 0) rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* initialize packet capture framework */ rte_pdump_init(); #endif @@ -3682,10 +3682,10 @@ main(int argc, char** argv) "Check the core mask argument\n"); /* Bitrate/latency stats disabled by default */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS bitrate_enabled = 0; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS latencystats_enabled = 0; #endif @@ -3764,7 +3764,7 @@ main(int argc, char** argv) /* Init metrics library */ rte_metrics_init(rte_socket_id()); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) { int ret = rte_latencystats_init(1, NULL); if (ret) @@ -3776,7 +3776,7 @@ main(int argc, char** argv) #endif /* Setup bitrate stats */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0) { bitrate_data = rte_stats_bitrate_create(); if (bitrate_data == NULL) @@ -3786,7 +3786,7 @@ main(int argc, char** argv) } #endif -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (strlen(cmdline_filename) != 0) cmdline_read_from_file(cmdline_filename); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index c7e7e41a97..660847c948 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -398,12 +398,12 @@ extern uint32_t param_total_num_mbufs; extern uint16_t stats_period; -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS extern uint8_t latencystats_enabled; extern lcoreid_t latencystats_lcore_id; #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS extern lcoreid_t bitrate_lcore_id; extern uint8_t bitrate_enabled; #endif diff --git a/app/test/meson.build b/app/test/meson.build index d3ae9c91ac..5ea7265d47 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -337,35 +337,35 @@ dump_test_names = [ # unit tests without requiring that the developer install the # DPDK libraries. Explicit linkage of drivers (plugin libraries) # in applications should not be used. -if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_RING') test_deps += 'mempool_ring' endif -if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_STACK') test_deps += 'mempool_stack' endif -if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') +if dpdk_conf.has('RTE_EVENT_SKELETON') test_deps += 'event_skeleton' endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') test_deps += 'crypto_scheduler' endif -if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') +if dpdk_conf.has('RTE_LIB_TELEMETRY') test_sources += 'test_telemetry_json.c' fast_tests += [['telemetry_json_autotest', true]] endif # The following linkages of drivers are required because # they are used via a driver-specific API. -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] - if dpdk_conf.has('RTE_LIBRTE_RING_PMD') + if dpdk_conf.has('RTE_NET_RING') test_sources += 'test_link_bonding_mode4.c' driver_test_names += 'link_bonding_mode4_autotest' endif endif -if dpdk_conf.has('RTE_LIBRTE_RING_PMD') +if dpdk_conf.has('RTE_NET_RING') test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' @@ -382,13 +382,13 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD') fast_tests += [['pdump_autotest', true]] endif -if dpdk_conf.has('RTE_LIBRTE_POWER') +if dpdk_conf.has('RTE_LIB_POWER') test_deps += 'power' endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') test_deps += 'kni' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') test_deps += 'pdump' endif @@ -405,7 +405,7 @@ cflags += '-fno-strict-aliasing' cflags += ['-DALLOW_INTERNAL_API'] test_dep_objs = [] -if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') +if dpdk_conf.has('RTE_LIB_COMPRESSDEV') compress_test_dep = dependency('zlib', required: false) if compress_test_dep.found() test_dep_objs += compress_test_dep @@ -415,7 +415,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') endif endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' endif diff --git a/app/test/process.h b/app/test/process.h index c3b3780337..27f1b1c0e6 100644 --- a/app/test/process.h +++ b/app/test/process.h @@ -24,8 +24,8 @@ #define exe "exe" #endif -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING #include <pthread.h> extern void *send_pkts(void *empty); extern uint16_t flag_for_send_pkts; @@ -45,8 +45,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) char *argv_cpy[numargs + 1]; int i, status; char path[32]; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING pthread_t thread; #endif #endif @@ -124,8 +124,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) } } /* parent process does a wait */ -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) pthread_create(&thread, NULL, &send_pkts, NULL); #endif @@ -133,8 +133,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) while (wait(&status) != pid) ; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) { flag_for_send_pkts = 0; pthread_join(thread, NULL); diff --git a/app/test/test.c b/app/test/test.c index 94d26ab1f6..afabfe42fc 100644 --- a/app/test/test.c +++ b/app/test/test.c @@ -12,7 +12,7 @@ #include <ctype.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #include <cmdline_rdline.h> #include <cmdline_parse.h> #include <cmdline_socket.h> @@ -25,12 +25,12 @@ extern cmdline_parse_ctx_t main_ctx[]; #include <rte_cycles.h> #include <rte_log.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER #include <rte_timer.h> #endif #include "test.h" -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include "test_pdump.h" #endif @@ -52,8 +52,8 @@ do_recursive_call(void) int (*action_fn)(void); } actions[] = { { "run_secondary_instances", test_mp_secondary }, -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING { "run_pdump_server_tests", test_pdump }, #endif #endif @@ -69,7 +69,7 @@ do_recursive_call(void) { "test_memory_flags", no_action }, { "test_file_prefix", no_action }, { "test_no_huge_flag", no_action }, -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER { "timer_secondary_spawn_wait", test_timer_secondary }, #endif }; @@ -91,7 +91,7 @@ int last_test_result; int main(int argc, char **argv) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE struct cmdline *cl; #endif char *extra_args; @@ -134,7 +134,7 @@ main(int argc, char **argv) goto out; } -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER if (rte_timer_subsystem_init() < 0) { ret = -1; goto out; @@ -163,7 +163,7 @@ main(int argc, char **argv) "HPET is not enabled, using TSC as default timer\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE cl = cmdline_stdin_new(main_ctx, "RTE>>"); if (cl == NULL) { ret = -1; @@ -191,7 +191,7 @@ main(int argc, char **argv) ret = 0; out: -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER rte_timer_subsystem_finalize(); #endif rte_eal_cleanup(); diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 153d001194..687a8830a7 100644 --- a/app/test/test_cryptodev.c +++ b/app/test/test_cryptodev.c @@ -18,7 +18,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #include <rte_cryptodev_scheduler_operations.h> #endif @@ -40,7 +40,7 @@ #include "test_cryptodev_aead_test_vectors.h" #include "test_cryptodev_hmac_test_vectors.h" #include "test_cryptodev_mixed_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "test_cryptodev_security_pdcp_test_vectors.h" #include "test_cryptodev_security_pdcp_test_func.h" #include "test_cryptodev_security_docsis_test_vectors.h" @@ -74,17 +74,17 @@ struct crypto_unittest_params { struct rte_crypto_sym_xform cipher_xform; struct rte_crypto_sym_xform auth_xform; struct rte_crypto_sym_xform aead_xform; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_docsis_xform docsis_xform; #endif union { struct rte_cryptodev_sym_session *sess; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_session *sec_session; #endif }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_action_type type; #endif struct rte_crypto_op *op; @@ -475,7 +475,7 @@ testsuite_setup(void) } } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER char vdev_args[VDEV_ARGS_SIZE] = {""}; char temp_str[VDEV_ARGS_SIZE] = {"mode=multi-core," "ordering=enable,name=cryptodev_test_scheduler,corelist="}; @@ -522,7 +522,7 @@ testsuite_setup(void) i, RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); } } -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { @@ -695,7 +695,7 @@ ut_teardown(void) struct rte_cryptodev_stats stats; /* free crypto session structure */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ut_params->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) { if (ut_params->sec_session) { rte_security_session_destroy(rte_cryptodev_get_sec_ctx @@ -7085,7 +7085,7 @@ test_authenticated_encryption(const struct aead_test_data *tdata) } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int security_proto_supported(enum rte_security_session_action_type action, enum rte_security_session_protocol proto) @@ -11710,7 +11710,7 @@ test_chacha20_poly1305_decrypt_test_case_rfc8439(void) return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* global AESNI slave IDs for the scheduler test */ uint8_t aesni_ids[2]; @@ -11930,7 +11930,7 @@ static struct unit_test_suite cryptodev_scheduler_testsuite = { } }; -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ static struct unit_test_suite cryptodev_testsuite = { .suite_name = "Crypto Unit Test Suite", @@ -12551,7 +12551,7 @@ static struct unit_test_suite cryptodev_testsuite = { TEST_CASE_ST(ut_setup, ut_teardown, test_verify_auth_aes_cmac_cipher_null_test_case_1), -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY TEST_CASE_ST(ut_setup_security, ut_teardown, test_PDCP_PROTO_all), TEST_CASE_ST(ut_setup_security, ut_teardown, @@ -12877,7 +12877,7 @@ test_cryptodev_mrvl(void) return unit_test_suite_runner(&cryptodev_mrvl_testsuite); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER static int test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/) diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h index d11d7cee7e..e261dfe36c 100644 --- a/app/test/test_cryptodev_hash_test_vectors.h +++ b/app/test/test_cryptodev_hash_test_vectors.h @@ -5,7 +5,7 @@ #ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ #define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ -#ifdef RTE_LIBRTE_PMD_AESNI_MB +#ifdef RTE_CRYPTO_AESNI_MB #include <intel-ipsec-mb.h> #endif diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c index b019656b29..fc7d1a2f02 100644 --- a/app/test/test_eal_flags.c +++ b/app/test/test_eal_flags.c @@ -344,7 +344,7 @@ test_invalid_b_flag(void) static int test_invalid_vdev_flag(void) { -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING #ifdef RTE_EXEC_ENV_FREEBSD /* BSD target doesn't support prefixes at this point, and we also need to * run another primary process here */ @@ -1504,7 +1504,7 @@ test_eal_flags(void) return ret; } -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING ret = test_invalid_vdev_flag(); if (ret < 0) { printf("Error in test_invalid_vdev_flag()\n"); diff --git a/app/test/test_func_reentrancy.c b/app/test/test_func_reentrancy.c index f5ddd03d76..2a0c134a99 100644 --- a/app/test/test_func_reentrancy.c +++ b/app/test/test_func_reentrancy.c @@ -27,15 +27,15 @@ #include <rte_spinlock.h> #include <rte_malloc.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> #include <rte_jhash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -200,7 +200,7 @@ mempool_create_lookup(__rte_unused void *arg) return 0; } -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH static void hash_clean(unsigned lcore_id) { @@ -328,9 +328,9 @@ fbk_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM static void lpm_clean(unsigned int lcore_id) { @@ -388,7 +388,7 @@ lpm_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ struct test_case{ case_func_t func; @@ -403,13 +403,13 @@ struct test_case test_cases[] = { { ring_create_lookup, NULL, ring_clean, "ring create/lookup" }, { mempool_create_lookup, NULL, mempool_clean, "mempool create/lookup" }, -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH { hash_create_free, NULL, hash_clean, "hash create/free" }, { fbk_create_free, NULL, fbk_clean, "fbk create/free" }, -#endif /* RTE_LIBRTE_HASH */ -#ifdef RTE_LIBRTE_LPM +#endif /* RTE_LIB_HASH */ +#ifdef RTE_LIB_LPM { lpm_create_free, NULL, lpm_clean, "lpm create/free" }, -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ }; /** diff --git a/app/test/test_kni.c b/app/test/test_kni.c index e47ab36e02..402f170649 100644 --- a/app/test/test_kni.c +++ b/app/test/test_kni.c @@ -11,7 +11,7 @@ #include "test.h" -#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI) +#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI) static int test_kni(void) diff --git a/app/test/test_mp_secondary.c b/app/test/test_mp_secondary.c index 3a655c3400..e1a7b4ae45 100644 --- a/app/test/test_mp_secondary.c +++ b/app/test/test_mp_secondary.c @@ -34,14 +34,14 @@ #include <rte_log.h> #include <rte_mempool.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -157,7 +157,7 @@ run_object_creation_tests(void) } printf("# Checked rte_mempool_create() OK\n"); -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH const struct rte_hash_parameters hash_params = { .name = "test_mp_hash" }; rte_errno=0; if ((rte_hash_create(&hash_params) != NULL) && @@ -177,7 +177,7 @@ run_object_creation_tests(void) printf("# Checked rte_fbk_hash_create() OK\n"); #endif -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM rte_errno=0; struct rte_lpm_config config; diff --git a/app/test/test_power.c b/app/test/test_power.c index 0c597c33f1..da1d67c0ab 100644 --- a/app/test/test_power.c +++ b/app/test/test_power.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power(void) diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c index d203810da9..731c6b4dc8 100644 --- a/app/test/test_power_cpufreq.c +++ b/app/test/test_power_cpufreq.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_cpufreq(void) diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c index 785cd048df..cc66b7a8a0 100644 --- a/app/test/test_power_kvm_vm.c +++ b/app/test/test_power_kvm_vm.c @@ -10,7 +10,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_kvm_vm(void) diff --git a/app/test/test_table.c b/app/test/test_table.c index bc8d8a2e10..95034148cb 100644 --- a/app/test/test_table.c +++ b/app/test/test_table.c @@ -180,7 +180,7 @@ test_table(void) } } -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL printf("\n\n\n\n************ACL tests************\n"); if (test_table_acl() < 0) { ret = TEST_FAILED; diff --git a/app/test/test_table.h b/app/test/test_table.h index 43b8855874..209bdbff2c 100644 --- a/app/test/test_table.h +++ b/app/test/test_table.h @@ -10,7 +10,7 @@ #include <rte_table_array.h> #include <rte_pipeline.h> -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL #include <rte_table_acl.h> #endif diff --git a/app/test/test_table_combined.h b/app/test/test_table_combined.h index d05866240f..fb94dbb94d 100644 --- a/app/test/test_table_combined.h +++ b/app/test/test_table_combined.h @@ -6,7 +6,7 @@ int test_table_stub_combined(void); int test_table_lpm_combined(void); int test_table_lpm_ipv6_combined(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash8unoptimized(void); diff --git a/app/test/test_table_tables.h b/app/test/test_table_tables.h index 7570e99639..530633a013 100644 --- a/app/test/test_table_tables.h +++ b/app/test/test_table_tables.h @@ -7,7 +7,7 @@ int test_table_hash_cuckoo(void); int test_table_lpm(void); int test_table_lpm_ipv6(void); int test_table_array(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash_unoptimized(void); diff --git a/config/arm/meson.build b/config/arm/meson.build index 42c0c34a57..a7c5e4dd00 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -21,9 +21,9 @@ flags_common_default = [ # ['RTE_ARM64_MEMCPY_ALIGN_MASK', 0xF], # ['RTE_ARM64_MEMCPY_STRICT_ALIGN', false], - ['RTE_LIBRTE_FM10K_PMD', false], - ['RTE_LIBRTE_SFC_EFX_PMD', false], - ['RTE_LIBRTE_AVP_PMD', false], + ['RTE_NET_FM10K', false], + ['RTE_NET_SFC_EFX', false], + ['RTE_NET_AVP', false], ['RTE_SCHED_VECTOR', false], ['RTE_ARM_USE_WFE', false], diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c index 97be761164..08836090d2 100644 --- a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c +++ b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c @@ -120,7 +120,7 @@ dpaa2_core_cluster_sdest(int cpu_id) return dpaa2_core_cluster_base + x; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 static void dpaa2_affine_dpio_intr_to_respective_core(int32_t dpio_id, int cpu_id) { @@ -242,7 +242,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) return -1; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 if (dpaa2_dpio_intr_init(dpio_dev, cpu_id)) { DPAA2_BUS_ERR("Interrupt registration failed for dpio"); return -1; @@ -255,7 +255,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) static void dpaa2_put_qbman_swp(struct dpaa2_dpio_dev *dpio_dev) { if (dpio_dev) { -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 dpaa2_dpio_intr_deinit(dpio_dev); #endif rte_atomic16_clear(&dpio_dev->ref_count); diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h index 1c07f2233e..0444b50a1e 100644 --- a/drivers/compress/qat/qat_comp.h +++ b/drivers/compress/qat/qat_comp.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_H_ #define _QAT_COMP_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h index ed27120604..252b4b24e3 100644 --- a/drivers/compress/qat/qat_comp_pmd.h +++ b/drivers/compress/qat/qat_comp_pmd.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_PMD_H_ #define _QAT_COMP_PMD_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h index e0c7b4f7cc..8e9b8bca29 100644 --- a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h +++ b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h @@ -7,7 +7,7 @@ #include <intel-ipsec-mb.h> -#if defined(RTE_LIBRTE_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) +#if defined(RTE_LIB_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) #define AESNI_MB_DOCSIS_SEC_ENABLED 1 #include <rte_security.h> #include <rte_security_driver.h> diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c index 109e61ae16..41401c6f08 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -58,7 +58,7 @@ static uint8_t cryptodev_driver_id; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline int build_proto_compound_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, @@ -1355,7 +1355,7 @@ build_sec_fd(struct rte_crypto_op *op, if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) sess = (dpaa2_sec_session *)get_sym_session_private_data( op->sym->session, cryptodev_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) sess = (dpaa2_sec_session *)get_sec_session_private_data( op->sym->sec_session); @@ -1383,7 +1383,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_sg_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: case DPAA2_SEC_PDCP: ret = build_proto_compound_sg_fd(sess, op, fd, bpid); @@ -1407,7 +1407,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: ret = build_proto_fd(sess, op, fd, bpid); break; @@ -1522,7 +1522,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, return num_tx; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct rte_crypto_op * sec_simple_fd_to_mbuf(const struct qbman_fd *fd) { @@ -1561,7 +1561,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) struct ctxt_priv *priv; struct rte_mbuf *dst, *src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single) return sec_simple_fd_to_mbuf(fd); #endif @@ -1594,7 +1594,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) } else dst = src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { uint16_t len = DPAA2_GET_FD_LEN(fd); dst->pkt_len = len; @@ -2539,7 +2539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev, return ret; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, dpaa2_sec_session *session, @@ -3698,7 +3698,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa2_sec_sym_session_clear, }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa2_sec_capabilities_get(void *device __rte_unused) { @@ -3736,7 +3736,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) struct dpaa2_sec_dev_private *internals; struct rte_device *dev = cryptodev->device; struct rte_dpaa2_device *dpaa2_dev; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct fsl_mc_io *dpseci; @@ -3775,7 +3775,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA2_SEC_DEBUG("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h index 528b64ef88..5d9cf12c4a 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h @@ -8,7 +8,7 @@ #ifndef _DPAA2_SEC_PMD_PRIVATE_H_ #define _DPAA2_SEC_PMD_PRIVATE_H_ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -141,7 +141,7 @@ struct dpaa2_sec_aead_ctxt { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * The structure is to be filled by user for PDCP Protocol */ @@ -193,7 +193,7 @@ typedef struct dpaa2_sec_session_entry { struct dpaa2_sec_aead_ctxt aead_ctxt; } ext_params; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct dpaa2_pdcp_ctxt pdcp; #endif }; @@ -550,7 +550,7 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c index 97002170b0..c4d1747a77 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.c +++ b/drivers/crypto/dpaa_sec/dpaa_sec.c @@ -15,7 +15,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif #include <rte_cycles.h> @@ -229,7 +229,7 @@ static inline int is_decode(dpaa_sec_session *ses) return ses->dir == DIR_DEC; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses) { @@ -408,7 +408,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses) memset(cdb, 0, sizeof(struct sec_cdb)); switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_IPSEC: shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses); break; @@ -1539,7 +1539,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses) return cf; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct dpaa_sec_job * build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses) { @@ -1714,7 +1714,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, op->sym->session, cryptodev_driver_id); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case RTE_CRYPTO_OP_SECURITY_SESSION: ses = (dpaa_sec_session *) get_sec_session_private_data( @@ -1761,7 +1761,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((op->sym->m_dst == NULL) || rte_pktmbuf_is_contiguous(op->sym->m_dst))) { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto(op, ses); @@ -1795,7 +1795,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, } } else { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto_sg(op, ses); @@ -1852,7 +1852,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((auth_tail_len << 16) | auth_hdr_len); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* In case of PDCP, per packet HFN is stored in * mbuf priv after sym_op. */ @@ -2467,7 +2467,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev, } } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, struct rte_security_ipsec_xform *ipsec_xform, @@ -3271,7 +3271,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa_sec_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa_sec_capabilities_get(void *device __rte_unused) { @@ -3310,7 +3310,7 @@ static int dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) { struct dpaa_sec_dev_private *internals; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct dpaa_sec_qp *qp; @@ -3347,7 +3347,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA_SEC_WARN("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h index 2cd50cc8dd..45ae534990 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.h +++ b/drivers/crypto/dpaa_sec/dpaa_sec.h @@ -98,7 +98,7 @@ struct sec_cdb { uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE]; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /*! * The structure is to be filled by user as a part of * dpaa_sec_proto_ctxt for PDCP Protocol @@ -125,7 +125,7 @@ typedef struct dpaa_sec_session_entry { enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/ enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/ enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/ #endif union { @@ -168,7 +168,7 @@ typedef struct dpaa_sec_session_entry { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct sec_pdcp_ctxt pdcp; #endif }; @@ -568,7 +568,7 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c index e3f98a76ba..4b7676deb8 100644 --- a/drivers/crypto/qat/qat_sym.c +++ b/drivers/crypto/qat/qat_sym.c @@ -180,7 +180,7 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg, } else if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { ctx = (struct qat_sym_session *)get_sym_session_private_data( op->sym->session, qat_sym_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY } else { ctx = (struct qat_sym_session *)get_sec_session_private_data( op->sym->sec_session); diff --git a/drivers/crypto/qat/qat_sym.h b/drivers/crypto/qat/qat_sym.h index 1a9748849e..da67a56b30 100644 --- a/drivers/crypto/qat/qat_sym.h +++ b/drivers/crypto/qat/qat_sym.h @@ -6,7 +6,7 @@ #define _QAT_SYM_H_ #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_net_crc.h> #endif @@ -135,7 +135,7 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx, return sym_op->cipher.data.length - last_block_len; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op) { @@ -231,7 +231,7 @@ qat_sym_process_response(void **op, uint8_t *resp) rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; } else { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t is_docsis_sec = 0; if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { @@ -256,7 +256,7 @@ qat_sym_process_response(void **op, uint8_t *resp) if (sess->bpi_ctx) { qat_bpicipher_postprocess(sess, rx_op); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (is_docsis_sec) qat_crc_verify(sess, rx_op); #endif diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h index 4ee798992d..f7cab2f471 100644 --- a/drivers/crypto/qat/qat_sym_capabilities.h +++ b/drivers/crypto/qat/qat_sym_capabilities.h @@ -731,7 +731,7 @@ }, } \ } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define QAT_SECURITY_SYM_CAPABILITIES \ { /* AES DOCSIS BPI */ \ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c index 314742f534..a291004cf5 100644 --- a/drivers/crypto/qat/qat_sym_pmd.c +++ b/drivers/crypto/qat/qat_sym_pmd.c @@ -8,7 +8,7 @@ #include <rte_malloc.h> #include <rte_pci.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -39,7 +39,7 @@ static const struct rte_cryptodev_capabilities qat_gen3_sym_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities qat_security_sym_capabilities[] = { QAT_SECURITY_SYM_CAPABILITIES, @@ -261,7 +261,7 @@ static struct rte_cryptodev_ops crypto_qat_ops = { .sym_session_clear = qat_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * qat_security_cap_get(void *device __rte_unused) { @@ -385,7 +385,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, "QAT_SYM_CAPA_GEN_%d", qat_pci_dev->qat_dev_gen); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; security_instance = rte_malloc("qat_sec", sizeof(struct rte_security_ctx), @@ -462,7 +462,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, return 0; error: -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif @@ -487,7 +487,7 @@ qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev) /* free crypto device */ cryptodev = rte_cryptodev_pmd_get_dev(qat_pci_dev->sym_dev->sym_dev_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h index f32a77e608..e0992cbe27 100644 --- a/drivers/crypto/qat/qat_sym_pmd.h +++ b/drivers/crypto/qat/qat_sym_pmd.h @@ -9,7 +9,7 @@ #include <rte_ether.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c index ed4d001592..23d059bf84 100644 --- a/drivers/crypto/qat/qat_sym_session.c +++ b/drivers/crypto/qat/qat_sym_session.c @@ -14,7 +14,7 @@ #include <rte_log.h> #include <rte_malloc.h> #include <rte_crypto_sym.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -2109,7 +2109,7 @@ int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int qat_sec_session_check_docsis(struct rte_security_session_conf *conf) { diff --git a/drivers/crypto/qat/qat_sym_session.h b/drivers/crypto/qat/qat_sym_session.h index 9f1033baf6..011e5bb7ab 100644 --- a/drivers/crypto/qat/qat_sym_session.h +++ b/drivers/crypto/qat/qat_sym_session.h @@ -6,7 +6,7 @@ #include <rte_crypto.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -159,7 +159,7 @@ qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg); int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY int qat_security_session_create(void *dev, struct rte_security_session_conf *conf, struct rte_security_session *sess, struct rte_mempool *mempool); diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b98e210e7..7cdb4dfe6a 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -33,7 +33,7 @@ #include <rte_random.h> #include <rte_dev.h> #include <rte_hash_crc.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -1151,7 +1151,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) /* Unlock any pending hardware semaphore */ ixgbe_swfw_lock_reset(hw); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ if (ixgbe_ipsec_ctx_create(eth_dev)) return -ENOMEM; @@ -3053,7 +3053,7 @@ ixgbe_dev_close(struct rte_eth_dev *dev) /* Remove all Traffic Manager configuration */ ixgbe_tm_conf_uninit(dev); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(dev->security_ctx); #endif diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 9bdef87fbd..33905f7136 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -12,7 +12,7 @@ #include "base/ixgbe_dcb_82599.h" #include "base/ixgbe_dcb_82598.h" #include "ixgbe_bypass.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "ixgbe_ipsec.h" #endif #include <rte_flow.h> @@ -494,7 +494,7 @@ struct ixgbe_adapter { struct ixgbe_filter_info filter; struct ixgbe_l2_tn_info l2_tn; struct ixgbe_bw_conf bw_conf; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct ixgbe_ipsec ipsec; #endif bool rx_bulk_alloc_allowed; diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index b2a2bfc02f..6b3dea46ee 100644 --- a/drivers/net/ixgbe/ixgbe_flow.c +++ b/drivers/net/ixgbe/ixgbe_flow.c @@ -215,7 +215,7 @@ cons_parse_ntuple_filter(const struct rte_flow_attr *attr, memset(ð_null, 0, sizeof(struct rte_flow_item_eth)); memset(&vlan_null, 0, sizeof(struct rte_flow_item_vlan)); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /** * Special case for flow action type RTE_FLOW_ACTION_TYPE_SECURITY */ @@ -629,7 +629,7 @@ ixgbe_parse_ntuple_filter(struct rte_eth_dev *dev, if (ret) return ret; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (filter->proto == IPPROTO_ESP) return 0; @@ -3057,7 +3057,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev, ret = ixgbe_parse_ntuple_filter(dev, attr, pattern, actions, &ntuple_filter, error); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (ntuple_filter.proto == IPPROTO_ESP) return flow; diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 977ecf5137..a456a4697b 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -452,7 +452,7 @@ ixgbe_set_xmit_ctx(struct ixgbe_tx_queue *txq, seqnum_seed |= tx_offload.l2_len << IXGBE_ADVTXD_TUNNEL_LEN; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ol_flags & PKT_TX_SEC_OFFLOAD) { union ixgbe_crypto_tx_desc_md *md = (union ixgbe_crypto_tx_desc_md *)mdata; @@ -645,7 +645,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint32_t ctx = 0; uint32_t new_ctx; union ixgbe_tx_offload tx_offload; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec; #endif @@ -675,7 +675,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, * are needed for offload functionality. */ ol_flags = tx_pkt->ol_flags; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY use_ipsec = txq->using_ipsec && (ol_flags & PKT_TX_SEC_OFFLOAD); #endif @@ -689,7 +689,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, tx_offload.tso_segsz = tx_pkt->tso_segsz; tx_offload.outer_l2_len = tx_pkt->outer_l2_len; tx_offload.outer_l3_len = tx_pkt->outer_l3_len; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) { union ixgbe_crypto_tx_desc_md *ipsec_mdata = (union ixgbe_crypto_tx_desc_md *) @@ -876,7 +876,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, } olinfo_status |= (pkt_len << IXGBE_ADVTXD_PAYLEN_SHIFT); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) olinfo_status |= IXGBE_ADVTXD_POPTS_IPSEC; #endif @@ -1460,7 +1460,7 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status) pkt_flags |= PKT_RX_EIP_CKSUM_BAD; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (rx_status & IXGBE_RXD_STAT_SECP) { pkt_flags |= PKT_RX_SEC_OFFLOAD; if (rx_status & IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG) @@ -2399,7 +2399,7 @@ ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt) { struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue; if (txq->offloads == 0 && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) { @@ -2495,7 +2495,7 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq) { /* Use a simple Tx queue (no offloads, no multi segs) if possible */ if ((txq->offloads == 0) && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { @@ -2554,7 +2554,7 @@ ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) tx_offload_capa |= DEV_TX_OFFLOAD_SECURITY; #endif @@ -2722,7 +2722,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, txq->offloads = offloads; txq->ops = &def_txq_ops; txq->tx_deferred_start = tx_conf->tx_deferred_start; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY txq->using_ipsec = !!(dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_SECURITY); #endif @@ -3005,7 +3005,7 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) offloads |= DEV_RX_OFFLOAD_SECURITY; #endif @@ -4834,7 +4834,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev) struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i]; rxq->rx_using_sse = rx_using_sse; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rxq->using_ipsec = !!(dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY); #endif @@ -5346,7 +5346,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev) ixgbe_setup_loopback_link_x540_x550(hw, true); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if ((dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY) || (dev->data->dev_conf.txmode.offloads & diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h index 7e09291b22..fa15911121 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.h +++ b/drivers/net/ixgbe/ixgbe_rxtx.h @@ -113,7 +113,7 @@ struct ixgbe_rx_queue { uint16_t rx_free_trigger; /**< triggers rx buffer allocation */ uint8_t rx_using_sse; /**< indicates that vector RX is in use */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec RX feature is in use */ #endif @@ -161,7 +161,7 @@ union ixgbe_tx_offload { /* fields for TX offloading of tunnels */ uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */ uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* inline ipsec related*/ uint64_t sa_idx:8; /**< TX SA database entry index */ uint64_t sec_pad_len:4; /**< padding length */ @@ -230,7 +230,7 @@ struct ixgbe_tx_queue { struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM]; const struct ixgbe_txq_ops *ops; /**< txq ops */ uint8_t tx_deferred_start; /**< not in global dev start. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec TX feature is in use */ #endif diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c index 517ca31669..e7ccb72a72 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c +++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c @@ -93,7 +93,7 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq) IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, rx_id); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void desc_to_olflags_v_ipsec(__m128i descs[4], struct rte_mbuf **rx_pkts) { @@ -318,7 +318,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, volatile union ixgbe_adv_rx_desc *rxdp; struct ixgbe_rx_entry *sw_ring; uint16_t nb_pkts_recd; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec = rxq->using_ipsec; #endif int pos; @@ -484,7 +484,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, /* set ol_flags with vlan packet type */ desc_to_olflags_v(descs, mbuf_init, vlan_flags, &rx_pkts[pos]); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (unlikely(use_ipsec)) desc_to_olflags_v_ipsec(descs, &rx_pkts[pos]); #endif diff --git a/drivers/net/kni/meson.build b/drivers/net/kni/meson.build index 0539b4768a..d9fa898d1a 100644 --- a/drivers/net/kni/meson.build +++ b/drivers/net/kni/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Intel Corporation # this driver can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') reason = 'missing dependency, DPDK KNI library' sources = files('rte_eth_kni.c') deps += 'kni' diff --git a/drivers/net/netvsc/meson.build b/drivers/net/netvsc/meson.build index e7f4493028..f3f52f7327 100644 --- a/drivers/net/netvsc/meson.build +++ b/drivers/net/netvsc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Microsoft Corporation -build = dpdk_conf.has('RTE_LIBRTE_VMBUS_BUS') +build = dpdk_conf.has('RTE_BUS_VMBUS') reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') diff --git a/drivers/net/vhost/meson.build b/drivers/net/vhost/meson.build index d7930862a7..963b30f209 100644 --- a/drivers/net/vhost/meson.build +++ b/drivers/net/vhost/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('rte_eth_vhost.c') install_headers('rte_eth_vhost.h') diff --git a/drivers/raw/dpaa2_cmdif/meson.build b/drivers/raw/dpaa2_cmdif/meson.build index e7656a3cda..06c0fe756d 100644 --- a/drivers/raw/dpaa2_cmdif/meson.build +++ b/drivers/raw/dpaa2_cmdif/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') diff --git a/drivers/raw/dpaa2_qdma/meson.build b/drivers/raw/dpaa2_qdma/meson.build index b9b08153ac..3eeab0d1c1 100644 --- a/drivers/raw/dpaa2_qdma/meson.build +++ b/drivers/raw/dpaa2_qdma/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') diff --git a/drivers/raw/ifpga/base/opae_osdep.h b/drivers/raw/ifpga/base/opae_osdep.h index 416cef01cb..18e6a11aac 100644 --- a/drivers/raw/ifpga/base/opae_osdep.h +++ b/drivers/raw/ifpga/base/opae_osdep.h @@ -8,7 +8,7 @@ #include <string.h> #include <stdbool.h> -#ifdef RTE_LIBRTE_EAL +#ifdef RTE_LIB_EAL #include "osdep_rte/osdep_generic.h" #else #include "osdep_raw/osdep_generic.h" diff --git a/drivers/vdpa/ifc/meson.build b/drivers/vdpa/ifc/meson.build index b179987f98..9d256af4b9 100644 --- a/drivers/vdpa/ifc/meson.build +++ b/drivers/vdpa/ifc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build index 9fec7f883f..5244cd4ffc 100644 --- a/examples/distributor/meson.build +++ b/examples/distributor/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # require the power library -build = dpdk_conf.has('RTE_LIBRTE_POWER') +build = dpdk_conf.has('RTE_LIB_POWER') allow_experimental_apis = true deps += ['distributor', 'power'] diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c index db8150efd5..13f9ba3795 100644 --- a/examples/ethtool/lib/rte_ethtool.c +++ b/examples/ethtool/lib/rte_ethtool.c @@ -9,7 +9,7 @@ #include <rte_ethdev.h> #include <rte_ether.h> #include <rte_bus_pci.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif #include "rte_ethtool.h" @@ -395,7 +395,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id) /* Set VF vf_rx_mode, VF unsupport status is discard */ for (vf = 0; vf < num_vfs; vf++) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE rte_pmd_ixgbe_set_vf_rxmode(port_id, vf, ETH_VMDQ_ACCEPT_UNTAG, 0); #endif diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index fdfdd1971e..cc8edac3df 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -13,7 +13,7 @@ sources = files('lib/rte_ethtool.c', includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f1a045a0a6..6afbaa6803 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' allow_experimental_apis = true -build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') +build = dpdk_conf.has('RTE_RAW_IOAT') deps += ['raw_ioat'] diff --git a/examples/ip_pipeline/kni.c b/examples/ip_pipeline/kni.c index 4519685932..a2d3331cb0 100644 --- a/examples/ip_pipeline/kni.c +++ b/examples/ip_pipeline/kni.c @@ -24,7 +24,7 @@ kni_init(void) { TAILQ_INIT(&kni_list); -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI rte_kni_init(KNI_MAX); #endif @@ -46,7 +46,7 @@ kni_find(const char *name) return NULL; } -#ifndef RTE_LIBRTE_KNI +#ifndef RTE_LIB_KNI struct kni * kni_create(const char *name __rte_unused, diff --git a/examples/ip_pipeline/kni.h b/examples/ip_pipeline/kni.h index c3856456d6..118f48df73 100644 --- a/examples/ip_pipeline/kni.h +++ b/examples/ip_pipeline/kni.h @@ -8,7 +8,7 @@ #include <stdint.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_kni.h> #endif @@ -17,7 +17,7 @@ struct kni { TAILQ_ENTRY(kni) node; char name[NAME_SIZE]; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_kni *k; #endif }; diff --git a/examples/ip_pipeline/pipeline.c b/examples/ip_pipeline/pipeline.c index b627310a0c..7ebabcae98 100644 --- a/examples/ip_pipeline/pipeline.c +++ b/examples/ip_pipeline/pipeline.c @@ -11,7 +11,7 @@ #include <rte_string_fns.h> #include <rte_port_ethdev.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_port_kni.h> #endif #include <rte_port_ring.h> @@ -28,7 +28,7 @@ #include <rte_table_lpm_ipv6.h> #include <rte_table_stub.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include "kni.h" #endif #include "link.h" @@ -160,7 +160,7 @@ pipeline_port_in_create(const char *pipeline_name, struct rte_port_ring_reader_params ring; struct rte_port_sched_reader_params sched; struct rte_port_fd_reader_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_reader_params kni; #endif struct rte_port_source_params source; @@ -264,7 +264,7 @@ pipeline_port_in_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_IN_KNI: { struct kni *kni; @@ -404,7 +404,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ring_writer_params ring; struct rte_port_sched_writer_params sched; struct rte_port_fd_writer_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_params kni; #endif struct rte_port_sink_params sink; @@ -415,7 +415,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ethdev_writer_nodrop_params ethdev; struct rte_port_ring_writer_nodrop_params ring; struct rte_port_fd_writer_nodrop_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_nodrop_params kni; #endif struct rte_port_sym_crypto_writer_nodrop_params sym_crypto; @@ -537,7 +537,7 @@ pipeline_port_out_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_OUT_KNI: { struct kni *kni; diff --git a/examples/kni/meson.build b/examples/kni/meson.build index fd6ae4442a..58639b1392 100644 --- a/examples/kni/meson.build +++ b/examples/kni/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # this app can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') deps += ['kni', 'bus_pci'] sources = files( 'main.c' diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c index 820470db50..8ea2677e56 100644 --- a/examples/l2fwd-crypto/main.c +++ b/examples/l2fwd-crypto/main.c @@ -43,7 +43,7 @@ #include <rte_prefetch.h> #include <rte_random.h> #include <rte_hexdump.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -2273,7 +2273,7 @@ initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports, * (one for the header, one for the private data) */ if (!strcmp(dev_info.driver_name, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 9002d62a6c..1813f015b2 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' deps += 'cryptodev' -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif allow_experimental_apis = true diff --git a/examples/l3fwd-power/meson.build b/examples/l3fwd-power/meson.build index 4cd694710d..eb8aef306a 100644 --- a/examples/l3fwd-power/meson.build +++ b/examples/l3fwd-power/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index bac6e5cd23..b0201f68b1 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -15,6 +15,6 @@ cflags += ['-D_FILE_OFFSET_BITS=64'] sources = files( 'ntb_fwd.c' ) -if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') +if dpdk_conf.has('RTE_RAW_NTB') deps += 'raw_ntb' endif diff --git a/examples/vhost_crypto/meson.build b/examples/vhost_crypto/meson.build index 2485f3bd10..b2c125e2fa 100644 --- a/examples/vhost_crypto/meson.build +++ b/examples/vhost_crypto/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') allow_experimental_apis = true deps += ['vhost', 'cryptodev'] sources = files( diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c index 1d00a6cf6c..228f06803d 100644 --- a/examples/vm_power_manager/channel_monitor.c +++ b/examples/vm_power_manager/channel_monitor.c @@ -28,7 +28,7 @@ #include <rte_atomic.h> #include <rte_cycles.h> #include <rte_ethdev.h> -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif #include <rte_power.h> @@ -439,7 +439,7 @@ get_pfid(struct policy *pol) for (i = 0; i < pol->pkt.nb_mac_to_monitor; i++) { RTE_ETH_FOREACH_DEV(x) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_query_vfid_by_mac(x, (struct rte_ether_addr *)&(pol->pkt.vfid[i])); #else @@ -538,13 +538,13 @@ get_pkt_diff(struct policy *pol) vsi_pkt_count_prev_total = 0; double rdtsc_curr, rdtsc_diff, diff; int x; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_eth_stats vf_stats; #endif for (x = 0; x < pol->pkt.nb_mac_to_monitor; x++) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E /*Read vsi stats*/ if (rte_pmd_i40e_get_vf_stats(x, pol->pfid[x], &vf_stats) == 0) vsi_pkt_count = vf_stats.ipackets; diff --git a/examples/vm_power_manager/guest_cli/meson.build b/examples/vm_power_manager/guest_cli/meson.build index 8c725420d7..cd95266018 100644 --- a/examples/vm_power_manager/guest_cli/meson.build +++ b/examples/vm_power_manager/guest_cli/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c index 44d2508b10..17b38406fc 100644 --- a/examples/vm_power_manager/main.c +++ b/examples/vm_power_manager/main.c @@ -31,13 +31,13 @@ #include "vm_power_cli.h" #include "oob_monitor.h" #include "parse.h" -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif @@ -397,16 +397,16 @@ main(int argc, char **argv) eth.addr_bytes[5] = w + 0xf0; ret = -ENOTSUP; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_mac_addr(portid, w, ð); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr( portid, w, ð); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr( portid, w, ð); diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 2dd132015f..1f813fbe87 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -6,22 +6,22 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif deps += ['power'] -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += ['net_bnxt'] endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += ['net_i40e'] endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += ['net_ixgbe'] endif diff --git a/lib/librte_eal/linux/eal.c b/lib/librte_eal/linux/eal.c index 9cf0e2ec01..9b579b8200 100644 --- a/lib/librte_eal/linux/eal.c +++ b/lib/librte_eal/linux/eal.c @@ -1085,7 +1085,7 @@ rte_eal_init(int argc, char **argv) */ iova_mode = RTE_IOVA_VA; RTE_LOG(DEBUG, EAL, "Physical addresses are unavailable, selecting IOVA as VA mode.\n"); -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) } else if (rte_eal_check_module("rte_kni") == 1) { iova_mode = RTE_IOVA_PA; RTE_LOG(DEBUG, EAL, "KNI is loaded, selecting IOVA as PA mode for better KNI performance.\n"); @@ -1102,7 +1102,7 @@ rte_eal_init(int argc, char **argv) RTE_LOG(DEBUG, EAL, "IOMMU is not available, selecting IOVA as PA mode.\n"); } } -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) /* Workaround for KNI which requires physical address to work * in kernels < 4.10 */ diff --git a/lib/librte_metrics/rte_metrics_telemetry.c b/lib/librte_metrics/rte_metrics_telemetry.c index 289ebae0bd..b97152aeb0 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.c +++ b/lib/librte_metrics/rte_metrics_telemetry.c @@ -6,7 +6,7 @@ #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <rte_telemetry_legacy.h> #endif @@ -529,7 +529,7 @@ RTE_LOG_REGISTER(metrics_log_level, lib.metrics, ERR); RTE_INIT(metrics_ctor) { -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY rte_telemetry_legacy_register("ports_all_stat_values", DATA_NOT_REQ, handle_ports_all_stats_values); rte_telemetry_legacy_register("global_stat_values", DATA_NOT_REQ, diff --git a/lib/librte_metrics/rte_metrics_telemetry.h b/lib/librte_metrics/rte_metrics_telemetry.h index 6c2391c563..3435a55425 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.h +++ b/lib/librte_metrics/rte_metrics_telemetry.h @@ -2,7 +2,7 @@ * Copyright(c) 2020 Intel Corporation */ -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <jansson.h> #else #define json_t void * diff --git a/lib/librte_port/meson.build b/lib/librte_port/meson.build index 9bbae28b75..609624c290 100644 --- a/lib/librte_port/meson.build +++ b/lib/librte_port/meson.build @@ -33,7 +33,7 @@ if dpdk_conf.has('RTE_PORT_PCAP') ext_deps += pcap_dep # dependency provided in config/meson.build endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') sources += files('rte_port_kni.c') headers += files('rte_port_kni.h') deps += 'kni' diff --git a/lib/meson.build b/lib/meson.build index 38678a7fb5..1d40cb13a9 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -72,7 +72,7 @@ foreach l:libraries ext_deps = [] deps = [] # eal is standard dependency once built - if dpdk_conf.has('RTE_LIBRTE_EAL') + if dpdk_conf.has('RTE_LIB_EAL') deps += ['eal'] endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [RFC PATCH v2 8/8] [v21.02] build: remove compatibility build defines 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson ` (6 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 7/8] build: replace use of old build macros Bruce Richardson @ 2020-10-02 15:58 ` Bruce Richardson 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-02 15:58 UTC (permalink / raw) To: dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas, Bruce Richardson As announced in the deprecation note, remove all compatibility build defines from previous make/meson versions and use only the standardized ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- config/meson.build | 2 +- config/rte_compatibility_defines.h | 129 -------------------------- config/rte_config.h | 1 - drivers/baseband/meson.build | 2 - drivers/bus/meson.build | 1 - drivers/common/meson.build | 1 - drivers/compress/meson.build | 1 - drivers/compress/octeontx/meson.build | 1 - drivers/crypto/meson.build | 1 - drivers/crypto/null/meson.build | 1 - drivers/crypto/octeontx/meson.build | 1 - drivers/crypto/octeontx2/meson.build | 1 - drivers/crypto/scheduler/meson.build | 1 - drivers/crypto/virtio/meson.build | 1 - drivers/event/meson.build | 1 - drivers/mempool/meson.build | 1 - drivers/meson.build | 23 ----- drivers/net/meson.build | 1 - drivers/raw/meson.build | 1 - drivers/regex/meson.build | 1 - drivers/regex/mlx5/meson.build | 1 - drivers/vdpa/meson.build | 1 - drivers/vdpa/mlx5/meson.build | 1 - lib/meson.build | 3 +- 24 files changed, 2 insertions(+), 176 deletions(-) delete mode 100644 config/rte_compatibility_defines.h diff --git a/config/meson.build b/config/meson.build index 3a36d9dd4c..860dfd2e67 100644 --- a/config/meson.build +++ b/config/meson.build @@ -254,7 +254,7 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers(['rte_config.h', 'rte_compatibility_defines.h'], +install_headers(['rte_config.h'], subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h deleted file mode 100644 index 47600052b6..0000000000 --- a/config/rte_compatibility_defines.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: BSD-3-Clause - * Copyright(c) 2017 Intel Corporation - */ - -#ifndef _RTE_CONFIG_H_ -#error "This file should only be included via rte_config.h" -#endif - -/* - * NOTE: these defines are for compatibility only and will be removed in a - * future DPDK release. - */ - -#ifdef RTE_LIBRTE_BITRATESTATS -#define RTE_LIBRTE_BITRATE -#endif - -#ifdef RTE_LIBRTE_LATENCYSTATS -#define RTE_LIBRTE_LATENCY_STATS -#endif - -#ifdef RTE_LIBRTE_DPAAX_COMMON -#define RTE_LIBRTE_COMMON_DPAAX -#endif - -#ifdef RTE_LIBRTE_VMBUS_BUS -#define RTE_LIBRTE_VMBUS -#endif - -#ifdef RTE_LIBRTE_BUCKET_MEMPOOL -#define RTE_DRIVER_MEMPOOL_BUCKET -#endif - -#ifdef RTE_LIBRTE_RING_MEMPOOL -#define RTE_DRIVER_MEMPOOL_RING -#endif - -#ifdef RTE_LIBRTE_STACK_MEMPOOL -#define RTE_DRIVER_MEMPOOL_STACK -#endif - -#ifdef RTE_LIBRTE_AF_PACKET_PMD -#define RTE_LIBRTE_PMD_AF_PACKET -#endif - -#ifdef RTE_LIBRTE_AF_XDP_PMD -#define RTE_LIBRTE_PMD_AF_XDP -#endif - -#ifdef RTE_LIBRTE_BOND_PMD -#define RTE_LIBRTE_PMD_BOND -#endif - -#ifdef RTE_LIBRTE_E1000_PMD -#define RTE_LIBRTE_EM_PMD -#endif - -#ifdef RTE_LIBRTE_E1000_PMD -#define RTE_LIBRTE_IGB_PMD -#endif - -#ifdef RTE_LIBRTE_FAILSAFE_PMD -#define RTE_LIBRTE_PMD_FAILSAFE -#endif - -#ifdef RTE_LIBRTE_KNI_PMD -#define RTE_LIBRTE_PMD_KNI -#endif - -#ifdef RTE_LIBRTE_LIQUIDIO_PMD -#define RTE_LIBRTE_LIO_PMD -#endif - -#ifdef RTE_LIBRTE_MEMIF_PMD -#define RTE_LIBRTE_PMD_MEMIF -#endif - -#ifdef RTE_LIBRTE_NULL_PMD -#define RTE_LIBRTE_PMD_NULL -#endif - -#ifdef RTE_LIBRTE_PCAP_PMD -#define RTE_LIBRTE_PMD_PCAP -#endif - -#ifdef RTE_LIBRTE_RING_PMD -#define RTE_LIBRTE_PMD_RING -#endif - -#ifdef RTE_LIBRTE_SFC_PMD -#define RTE_LIBRTE_SFC_EFX_PMD -#endif - -#ifdef RTE_LIBRTE_SOFTNIC_PMD -#define RTE_LIBRTE_PMD_SOFTNIC -#endif - -#ifdef RTE_LIBRTE_SZEDATA2_PMD -#define RTE_LIBRTE_PMD_SZEDATA2 -#endif - -#ifdef RTE_LIBRTE_TAP_PMD -#define RTE_LIBRTE_PMD_TAP -#endif - -#ifdef RTE_LIBRTE_THUNDERX_PMD -#define RTE_LIBRTE_THUNDERX_NICVF_PMD -#endif - -#ifdef RTE_LIBRTE_VHOST_PMD -#define RTE_LIBRTE_PMD_VHOST -#endif - -#ifdef RTE_LIBRTE_PMD_ARMV8 -#define RTE_LIBRTE_PMD_ARMV8_CRYPTO -#endif - -#ifdef RTE_LIBRTE_PMD_MVSAM -#define RTE_LIBRTE_PMD_MVSAM_CRYPTO -#endif - -#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS -#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF -#endif - -#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV -#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF -#endif - diff --git a/config/rte_config.h b/config/rte_config.h index cacc1837cf..0bae630fd9 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,7 +13,6 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> -#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build index 7e1b64ffdd..4102769827 100644 --- a/drivers/baseband/meson.build +++ b/drivers/baseband/meson.build @@ -6,5 +6,3 @@ if is_windows endif drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec'] - -config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build index bd73efd187..2e7727af08 100644 --- a/drivers/bus/meson.build +++ b/drivers/bus/meson.build @@ -3,4 +3,3 @@ drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] -config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' diff --git a/drivers/common/meson.build b/drivers/common/meson.build index d78882f05e..ba6325adf3 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -7,4 +7,3 @@ endif std_deps = ['eal'] drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] -config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index 33f5e33dde..cd96def086 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,4 +8,3 @@ endif drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/compress/octeontx/meson.build b/drivers/compress/octeontx/meson.build index 2d71b4da21..e1b7bed422 100644 --- a/drivers/compress/octeontx/meson.build +++ b/drivers/compress/octeontx/meson.build @@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cavium, Inc -fmt_name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index fa5c7ef3a5..8a82be9b05 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -25,4 +25,3 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/crypto/null/meson.build b/drivers/crypto/null/meson.build index 421414916c..1f7d644de1 100644 --- a/drivers/crypto/null/meson.build +++ b/drivers/crypto/null/meson.build @@ -2,5 +2,4 @@ # Copyright(c) 2017 Intel Corporation deps += 'bus_vdev' -fmt_name = 'null_crypto' sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c') diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build index d6939720d8..ef3c003945 100644 --- a/drivers/crypto/octeontx/meson.build +++ b/drivers/crypto/octeontx/meson.build @@ -7,7 +7,6 @@ endif deps += ['bus_pci'] deps += ['common_cpt'] -fmt_name = 'octeontx_crypto' sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build index bf502e247d..87296f2a2a 100644 --- a/drivers/crypto/octeontx2/meson.build +++ b/drivers/crypto/octeontx2/meson.build @@ -11,7 +11,6 @@ deps += ['common_cpt'] deps += ['common_octeontx2'] deps += ['ethdev'] deps += ['security'] -fmt_name = 'octeontx2_crypto' sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', diff --git a/drivers/crypto/scheduler/meson.build b/drivers/crypto/scheduler/meson.build index 2209c50232..b67d9306e0 100644 --- a/drivers/crypto/scheduler/meson.build +++ b/drivers/crypto/scheduler/meson.build @@ -2,7 +2,6 @@ # Copyright(c) 2018 Luca Boccassi <bluca@debian.org> deps += ['bus_vdev', 'reorder'] -fmt_name = 'crypto_scheduler' sources = files( 'rte_cryptodev_scheduler.c', 'scheduler_failover.c', diff --git a/drivers/crypto/virtio/meson.build b/drivers/crypto/virtio/meson.build index 6cea782deb..20e9e9551e 100644 --- a/drivers/crypto/virtio/meson.build +++ b/drivers/crypto/virtio/meson.build @@ -3,6 +3,5 @@ includes += include_directories('../../../lib/librte_vhost') deps += 'bus_pci' -fmt_name = 'virtio_crypto' sources = files('virtio_cryptodev.c', 'virtio_pci.c', 'virtio_rxtx.c', 'virtqueue.c') diff --git a/drivers/event/meson.build b/drivers/event/meson.build index a7dac99de2..a2b6cedaa8 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,4 +11,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build index 036647149e..16b9693505 100644 --- a/drivers/mempool/meson.build +++ b/drivers/mempool/meson.build @@ -7,4 +7,3 @@ endif drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack'] std_deps = ['mempool'] -config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' diff --git a/drivers/meson.build b/drivers/meson.build index a5a6fed06e..ad3fecb86f 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -32,7 +32,6 @@ endif foreach subpath:subdirs drivers = [] std_deps = [] - config_flag_fmt = '' # format string used to set the value in dpdk_conf # subpath can be either "class" or "class/driver" if subpath.contains('/') @@ -58,7 +57,6 @@ foreach subpath:subdirs build = true # set to false to disable, e.g. missing deps reason = '<unknown reason>' # set if build == false to explain name = drv - fmt_name = '' sources = [] objs = [] cflags = default_cflags @@ -113,27 +111,6 @@ foreach subpath:subdirs lib_name = '_'.join(['rte', class, name]) dpdk_conf.set(lib_name.to_upper(), 1) - if fmt_name == '' - fmt_name = name - endif - - dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro - # for driver compatibility, since we changed the - # default to match that of make. Remove in future release - # after following deprecation process - if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' - or class == 'compress' - or class == 'event') - alt_flag_fmt = '_@0@_PMD'.join( - config_flag_fmt.split('_PMD_@0@')) - if config_flag_fmt.contains('EVENTDEV') - alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( - config_flag_fmt.split('_PMD_@0@_EVENTDEV')) - endif - dpdk_conf.set(alt_flag_fmt.format( - fmt_name.to_upper()), 1) - endif - dpdk_extra_ldflags += pkgconfig_extra_libs # generate pmdinfo sources by building a temporary diff --git a/drivers/net/meson.build b/drivers/net/meson.build index 4e4c2c976a..0612dc9c59 100644 --- a/drivers/net/meson.build +++ b/drivers/net/meson.build @@ -58,4 +58,3 @@ drivers = ['af_packet', std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std std_deps += ['bus_vdev'] # same with vdev bus -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build index d8d6cf5824..8c3a036dfd 100644 --- a/drivers/raw/meson.build +++ b/drivers/raw/meson.build @@ -11,4 +11,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma', 'octeontx2_ep', 'skeleton'] std_deps = ['rawdev'] -config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' diff --git a/drivers/regex/meson.build b/drivers/regex/meson.build index f171e9fdf0..8ce5bafe9e 100644 --- a/drivers/regex/meson.build +++ b/drivers/regex/meson.build @@ -3,4 +3,3 @@ drivers = ['mlx5'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' diff --git a/drivers/regex/mlx5/meson.build b/drivers/regex/mlx5/meson.build index d7cb2c5721..87e9611812 100644 --- a/drivers/regex/mlx5/meson.build +++ b/drivers/regex/mlx5/meson.build @@ -7,7 +7,6 @@ if not is_linux subdir_done() endif -fmt_name = 'mlx5_regex' deps += ['common_mlx5', 'eal', 'regexdev'] sources = files( 'mlx5_regex.c', diff --git a/drivers/vdpa/meson.build b/drivers/vdpa/meson.build index b346e43086..4929be4c03 100644 --- a/drivers/vdpa/meson.build +++ b/drivers/vdpa/meson.build @@ -9,4 +9,3 @@ drivers = ['ifc', 'mlx5',] std_deps = ['bus_pci', 'kvargs'] std_deps += ['vhost'] -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' diff --git a/drivers/vdpa/mlx5/meson.build b/drivers/vdpa/mlx5/meson.build index 254a8ec14b..a83ca86b3f 100644 --- a/drivers/vdpa/mlx5/meson.build +++ b/drivers/vdpa/mlx5/meson.build @@ -7,7 +7,6 @@ if not is_linux subdir_done() endif -fmt_name = 'mlx5_vdpa' deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'eal', 'sched'] sources = files( 'mlx5_vdpa.c', diff --git a/lib/meson.build b/lib/meson.build index 1d40cb13a9..faeb22695c 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -97,8 +97,7 @@ foreach l:libraries set_variable(name.underscorify() + '_disable_reason', reason) else enabled_libs += name - dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro - dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro + dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) install_headers(headers) libname = 'rte_' + name -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 0/7] Rework build macros 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (8 preceding siblings ...) 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson @ 2020-10-14 14:12 ` Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies Bruce Richardson ` (6 more replies) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson 11 siblings, 7 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:12 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Following on from discussion in RFC v1 and v2 of this set, this version reworks the automated macros defined by meson to indicate if a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config. Advantages of this rework: * Much cleaner having standard macros * No need for defining the format of macros for each class * Shorter macros (for the most part) Disadvantages: * Potentially requires application changes * Inconsistency between the auto-defined macros and the other feature-set ones. v3: rebased to latest dropped RFC from title dropped 21.02 cleanup patch so whole patchset targets 20.11 Bruce Richardson (7): app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency build: add defines for compatibility with make build qat: build from common folder build: remove library name from version map filename build: standardize component names and defines build: replace use of old build macros app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 8 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 3 + app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 34 +++- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 29 +-- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 ++++++++++++ config/rte_config.h | 1 + doc/guides/rel_notes/deprecation.rst | 8 + ..._fpga_5gnr_fec_version.map => version.map} | 0 ...v_fpga_lte_fec_version.map => version.map} | 0 drivers/baseband/meson.build | 1 - ...pmd_bbdev_null_version.map => version.map} | 0 ...bbdev_turbo_sw_version.map => version.map} | 0 .../{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- ...{rte_bus_fslmc_version.map => version.map} | 0 ...{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/meson.build | 1 - .../{rte_bus_pci_version.map => version.map} | 0 .../{rte_bus_vdev_version.map => version.map} | 0 ...{rte_bus_vmbus_version.map => version.map} | 0 ...rte_common_cpt_version.map => version.map} | 0 ...e_common_dpaax_version.map => version.map} | 0 ...te_common_iavf_version.map => version.map} | 0 drivers/common/meson.build | 3 +- drivers/common/mlx5/meson.build | 1 - ...te_common_mlx5_version.map => version.map} | 0 ...te_common_mvep_version.map => version.map} | 0 ...ommon_octeontx_version.map => version.map} | 0 ...mmon_octeontx2_version.map => version.map} | 0 drivers/common/qat/meson.build | 68 ++++++- .../qat/version.map} | 0 ...common_sfc_efx_version.map => version.map} | 0 .../version.map} | 0 drivers/compress/meson.build | 5 +- drivers/compress/octeontx/meson.build | 2 +- .../version.map} | 0 drivers/compress/qat/meson.build | 17 -- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../{rte_pmd_zlib_version.map => version.map} | 0 ..._pmd_aesni_gcm_version.map => version.map} | 0 .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- ...e_pmd_aesni_mb_version.map => version.map} | 0 ...{rte_pmd_armv8_version.map => version.map} | 0 ...te_pmd_caam_jr_version.map => version.map} | 0 .../{rte_pmd_ccp_version.map => version.map} | 0 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- ..._pmd_dpaa2_sec_version.map => version.map} | 0 drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- ...e_pmd_dpaa_sec_version.map => version.map} | 0 ...rte_pmd_kasumi_version.map => version.map} | 0 drivers/crypto/meson.build | 4 +- ...{rte_pmd_mvsam_version.map => version.map} | 0 ...rte_pmd_nitrox_version.map => version.map} | 0 drivers/crypto/null/meson.build | 2 +- ...md_null_crypto_version.map => version.map} | 0 drivers/crypto/octeontx/meson.build | 2 +- ...cteontx_crypto_version.map => version.map} | 0 drivers/crypto/octeontx2/meson.build | 2 +- ...teontx2_crypto_version.map => version.map} | 0 ...te_pmd_openssl_version.map => version.map} | 0 drivers/crypto/qat/meson.build | 23 --- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/crypto/scheduler/meson.build | 2 +- ...ypto_scheduler_version.map => version.map} | 0 ...rte_pmd_snow3g_version.map => version.map} | 0 drivers/crypto/virtio/meson.build | 2 +- ..._virtio_crypto_version.map => version.map} | 0 .../{rte_pmd_zuc_version.map => version.map} | 0 drivers/event/dpaa/meson.build | 2 +- ...pmd_dpaa_event_version.map => version.map} | 0 drivers/event/dpaa2/meson.build | 2 +- ...md_dpaa2_event_version.map => version.map} | 0 ..._pmd_dsw_event_version.map => version.map} | 0 drivers/event/meson.build | 3 +- drivers/event/octeontx/meson.build | 2 +- ...octeontx_event_version.map => version.map} | 0 drivers/event/octeontx2/meson.build | 2 +- ...cteontx2_event_version.map => version.map} | 0 ...pmd_opdl_event_version.map => version.map} | 0 ...skeleton_event_version.map => version.map} | 0 ...e_pmd_sw_event_version.map => version.map} | 0 ...mempool_bucket_version.map => version.map} | 0 ...e_mempool_dpaa_version.map => version.map} | 0 ..._mempool_dpaa2_version.map => version.map} | 0 drivers/mempool/meson.build | 1 - ...mpool_octeontx_version.map => version.map} | 0 ...pool_octeontx2_version.map => version.map} | 0 ...e_mempool_ring_version.map => version.map} | 0 ..._mempool_stack_version.map => version.map} | 0 drivers/meson.build | 29 ++- ..._pmd_af_packet_version.map => version.map} | 0 ...rte_pmd_af_xdp_version.map => version.map} | 0 .../{rte_pmd_ark_version.map => version.map} | 0 ...e_pmd_atlantic_version.map => version.map} | 0 .../{rte_pmd_avp_version.map => version.map} | 0 ...{rte_pmd_axgbe_version.map => version.map} | 0 ...{rte_pmd_bnx2x_version.map => version.map} | 0 .../{rte_pmd_bnxt_version.map => version.map} | 0 .../{rte_pmd_bond_version.map => version.map} | 0 ...{rte_pmd_cxgbe_version.map => version.map} | 0 .../{rte_pmd_dpaa_version.map => version.map} | 0 ...{rte_pmd_dpaa2_version.map => version.map} | 0 ...{rte_pmd_e1000_version.map => version.map} | 0 .../{rte_pmd_ena_version.map => version.map} | 0 ...{rte_pmd_enetc_version.map => version.map} | 0 .../{rte_pmd_enic_version.map => version.map} | 0 ...e_pmd_failsafe_version.map => version.map} | 0 ...{rte_pmd_fm10k_version.map => version.map} | 0 ...{rte_pmd_hinic_version.map => version.map} | 0 .../{rte_pmd_hns3_version.map => version.map} | 0 .../{rte_pmd_i40e_version.map => version.map} | 0 .../{rte_pmd_iavf_version.map => version.map} | 0 .../{rte_pmd_ice_version.map => version.map} | 0 .../{rte_pmd_igc_version.map => version.map} | 0 ...{rte_pmd_ionic_version.map => version.map} | 0 ...rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- ...{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/meson.build | 2 +- .../{rte_pmd_kni_version.map => version.map} | 0 ...e_pmd_liquidio_version.map => version.map} | 0 ...{rte_pmd_memif_version.map => version.map} | 0 drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- .../{rte_pmd_mlx4_version.map => version.map} | 0 .../{rte_pmd_mlx5_version.map => version.map} | 0 ...rte_pmd_mvneta_version.map => version.map} | 0 ...{rte_pmd_mvpp2_version.map => version.map} | 0 drivers/net/netvsc/meson.build | 2 +- ...rte_pmd_netvsc_version.map => version.map} | 0 .../{rte_pmd_nfb_version.map => version.map} | 0 .../{rte_pmd_nfp_version.map => version.map} | 0 .../{rte_pmd_null_version.map => version.map} | 0 ...e_pmd_octeontx_version.map => version.map} | 0 ..._pmd_octeontx2_version.map => version.map} | 0 .../{rte_pmd_pcap_version.map => version.map} | 0 .../{rte_pmd_pfe_version.map => version.map} | 0 .../{rte_pmd_qede_version.map => version.map} | 0 .../{rte_pmd_ring_version.map => version.map} | 0 .../{rte_pmd_sfc_version.map => version.map} | 0 ...te_pmd_softnic_version.map => version.map} | 0 ...e_pmd_szedata2_version.map => version.map} | 0 .../{rte_pmd_tap_version.map => version.map} | 0 ...e_pmd_thunderx_version.map => version.map} | 0 ...md_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/meson.build | 2 +- ...{rte_pmd_vhost_version.map => version.map} | 0 ...rte_pmd_virtio_version.map => version.map} | 0 ...te_pmd_vmxnet3_version.map => version.map} | 0 drivers/raw/dpaa2_cmdif/meson.build | 2 +- ...ev_dpaa2_cmdif_version.map => version.map} | 0 drivers/raw/dpaa2_qdma/meson.build | 2 +- ...dev_dpaa2_qdma_version.map => version.map} | 0 drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/raw/ifpga/meson.build | 2 +- ...e_rawdev_ifpga_version.map => version.map} | 0 ...te_rawdev_ioat_version.map => version.map} | 0 drivers/raw/meson.build | 1 - ...rte_rawdev_ntb_version.map => version.map} | 0 ..._octeontx2_dma_version.map => version.map} | 0 ...v_octeontx2_ep_version.map => version.map} | 0 ...awdev_skeleton_version.map => version.map} | 0 drivers/regex/meson.build | 1 - ...pmd_mlx5_regex_version.map => version.map} | 0 ...cteontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/meson.build | 2 +- .../{rte_pmd_ifc_version.map => version.map} | 0 drivers/vdpa/meson.build | 1 - ..._pmd_mlx5_vdpa_version.map => version.map} | 0 examples/bond/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 4 +- examples/ioat/meson.build | 4 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 3 + examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 4 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 14 +- .../{rte_acl_version.map => version.map} | 0 .../{rte_bbdev_version.map => version.map} | 0 ...e_bitratestats_version.map => version.map} | 0 .../{rte_bpf_version.map => version.map} | 0 .../{rte_cfgfile_version.map => version.map} | 0 .../{rte_cmdline_version.map => version.map} | 0 ...te_compressdev_version.map => version.map} | 0 ...{rte_cryptodev_version.map => version.map} | 0 ...te_distributor_version.map => version.map} | 0 lib/librte_eal/linux/eal.c | 4 +- .../{rte_eal_version.map => version.map} | 0 .../{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/meson.build | 1 - .../{rte_ethdev_version.map => version.map} | 0 .../{rte_eventdev_version.map => version.map} | 0 .../{rte_fib_version.map => version.map} | 0 ..._flow_classify_version.map => version.map} | 0 lib/librte_graph/meson.build | 2 - .../{rte_graph_version.map => version.map} | 0 .../{rte_gro_version.map => version.map} | 0 .../{rte_gso_version.map => version.map} | 0 .../{rte_hash_version.map => version.map} | 0 .../{rte_ip_frag_version.map => version.map} | 0 .../{rte_ipsec_version.map => version.map} | 0 .../{rte_jobstats_version.map => version.map} | 0 .../{rte_kni_version.map => version.map} | 0 .../{rte_kvargs_version.map => version.map} | 0 ...e_latencystats_version.map => version.map} | 0 .../{rte_lpm_version.map => version.map} | 0 .../{rte_mbuf_version.map => version.map} | 0 .../{rte_member_version.map => version.map} | 0 .../{rte_mempool_version.map => version.map} | 0 .../{rte_meter_version.map => version.map} | 0 lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- .../{rte_metrics_version.map => version.map} | 0 .../{rte_net_version.map => version.map} | 0 .../{rte_node_version.map => version.map} | 0 .../{rte_pci_version.map => version.map} | 0 .../{rte_pdump_version.map => version.map} | 0 .../{rte_pipeline_version.map => version.map} | 0 lib/librte_port/meson.build | 2 +- .../{rte_port_version.map => version.map} | 0 .../{rte_power_version.map => version.map} | 0 .../{rte_rawdev_version.map => version.map} | 0 .../{rte_rcu_version.map => version.map} | 0 .../{rte_regexdev_version.map => version.map} | 0 .../{rte_reorder_version.map => version.map} | 0 .../{rte_rib_version.map => version.map} | 0 .../{rte_ring_version.map => version.map} | 0 .../{rte_sched_version.map => version.map} | 0 .../{rte_security_version.map => version.map} | 0 .../{rte_stack_version.map => version.map} | 0 .../{rte_table_version.map => version.map} | 0 ...{rte_telemetry_version.map => version.map} | 0 .../{rte_timer_version.map => version.map} | 0 .../{rte_vhost_version.map => version.map} | 0 lib/meson.build | 9 +- 291 files changed, 660 insertions(+), 492 deletions(-) create mode 100644 config/rte_compatibility_defines.h rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%) rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) delete mode 100644 drivers/crypto/qat/meson.build rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson @ 2020-10-14 14:12 ` Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency Bruce Richardson ` (5 subsequent siblings) 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:12 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build. Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 996ef1176111 ("app: add all remaining apps to meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test-crypto-perf/meson.build | 3 +++ app/test-pmd/meson.build | 12 ++++++++++++ 2 files changed, 15 insertions(+) diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index f394b75ba..4bd71510d 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,3 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index f52ab148f..0d9e45049 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -31,6 +31,18 @@ endif if dpdk_conf.has('RTE_LIBRTE_PDUMP') deps += 'pdump' endif +if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') + deps += 'bitratestats' +endif +if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') + deps += 'latencystats' +endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif +if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') + deps += 'pmd_bond' +endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') deps += 'pmd_bnxt' endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies Bruce Richardson @ 2020-10-15 10:32 ` Luca Boccassi 0 siblings, 0 replies; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:32 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, stable On Wed, 2020-10-14 at 15:12 +0100, Bruce Richardson wrote: > A number of lib and driver dependencies for various apps were missed on > build because the proper macro names for their use were mismatched between > meson and make build systems. Before adding in equivalent compatibility > macros we need to ensure to add the proper dependencies to ensure a valid > build. > > Fixes: 16ade738fd0d ("app/testpmd: build with meson") > Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") > Fixes: 996ef1176111 ("app: add all remaining apps to meson build") > Cc: stable@dpdk.org > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > app/test-crypto-perf/meson.build | 3 +++ > app/test-pmd/meson.build | 12 ++++++++++++ > 2 files changed, 15 insertions(+) Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies Bruce Richardson @ 2020-10-14 14:12 ` Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build Bruce Richardson ` (4 subsequent siblings) 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:12 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build. Fixes: 89f0711f9ddf ("examples: build some samples with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/l2fwd-crypto/meson.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 6c852ad19..39e1604fa 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,6 +7,9 @@ # DPDK instance, use 'make' deps += 'cryptodev' +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif allow_experimental_apis = true sources = files( 'main.c' -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-10-15 10:32 ` Luca Boccassi 0 siblings, 0 replies; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:32 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, stable On Wed, 2020-10-14 at 15:12 +0100, Bruce Richardson wrote: > When the crypto-scheduler support is enabled, we were missing the > dependency on it as part of the meson build. > > Fixes: 89f0711f9ddf ("examples: build some samples with meson") > Cc: stable@dpdk.org > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > examples/l2fwd-crypto/meson.build | 3 +++ > 1 file changed, 3 insertions(+) Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-10-14 14:13 ` Bruce Richardson 2020-10-15 10:31 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 4/7] qat: build from common folder Bruce Richardson ` (3 subsequent siblings) 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:13 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases. As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions. For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson. Fixes: 5b9656b157d3 ("lib: build with meson") Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") Fixes: dcadbbde8e61 ("crypto/null: build with meson") Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test/meson.build | 1 + config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ config/rte_config.h | 1 + drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 ++++ 8 files changed, 151 insertions(+), 4 deletions(-) create mode 100644 config/rte_compatibility_defines.h diff --git a/app/test/meson.build b/app/test/meson.build index dedf29dd7..fc90a1909 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -415,6 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' + test_deps += 'pmd_crypto_scheduler' endif foreach d:test_deps diff --git a/config/meson.build b/config/meson.build index d0e593226..89bffc85a 100644 --- a/config/meson.build +++ b/config/meson.build @@ -253,7 +253,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers('rte_config.h', subdir: get_option('include_subdir_arch')) +install_headers(['rte_config.h', 'rte_compatibility_defines.h'], + subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS dpdk_conf.set('RTE_EAL_VFIO', is_linux) diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h new file mode 100644 index 000000000..47600052b --- /dev/null +++ b/config/rte_compatibility_defines.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2017 Intel Corporation + */ + +#ifndef _RTE_CONFIG_H_ +#error "This file should only be included via rte_config.h" +#endif + +/* + * NOTE: these defines are for compatibility only and will be removed in a + * future DPDK release. + */ + +#ifdef RTE_LIBRTE_BITRATESTATS +#define RTE_LIBRTE_BITRATE +#endif + +#ifdef RTE_LIBRTE_LATENCYSTATS +#define RTE_LIBRTE_LATENCY_STATS +#endif + +#ifdef RTE_LIBRTE_DPAAX_COMMON +#define RTE_LIBRTE_COMMON_DPAAX +#endif + +#ifdef RTE_LIBRTE_VMBUS_BUS +#define RTE_LIBRTE_VMBUS +#endif + +#ifdef RTE_LIBRTE_BUCKET_MEMPOOL +#define RTE_DRIVER_MEMPOOL_BUCKET +#endif + +#ifdef RTE_LIBRTE_RING_MEMPOOL +#define RTE_DRIVER_MEMPOOL_RING +#endif + +#ifdef RTE_LIBRTE_STACK_MEMPOOL +#define RTE_DRIVER_MEMPOOL_STACK +#endif + +#ifdef RTE_LIBRTE_AF_PACKET_PMD +#define RTE_LIBRTE_PMD_AF_PACKET +#endif + +#ifdef RTE_LIBRTE_AF_XDP_PMD +#define RTE_LIBRTE_PMD_AF_XDP +#endif + +#ifdef RTE_LIBRTE_BOND_PMD +#define RTE_LIBRTE_PMD_BOND +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_EM_PMD +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_IGB_PMD +#endif + +#ifdef RTE_LIBRTE_FAILSAFE_PMD +#define RTE_LIBRTE_PMD_FAILSAFE +#endif + +#ifdef RTE_LIBRTE_KNI_PMD +#define RTE_LIBRTE_PMD_KNI +#endif + +#ifdef RTE_LIBRTE_LIQUIDIO_PMD +#define RTE_LIBRTE_LIO_PMD +#endif + +#ifdef RTE_LIBRTE_MEMIF_PMD +#define RTE_LIBRTE_PMD_MEMIF +#endif + +#ifdef RTE_LIBRTE_NULL_PMD +#define RTE_LIBRTE_PMD_NULL +#endif + +#ifdef RTE_LIBRTE_PCAP_PMD +#define RTE_LIBRTE_PMD_PCAP +#endif + +#ifdef RTE_LIBRTE_RING_PMD +#define RTE_LIBRTE_PMD_RING +#endif + +#ifdef RTE_LIBRTE_SFC_PMD +#define RTE_LIBRTE_SFC_EFX_PMD +#endif + +#ifdef RTE_LIBRTE_SOFTNIC_PMD +#define RTE_LIBRTE_PMD_SOFTNIC +#endif + +#ifdef RTE_LIBRTE_SZEDATA2_PMD +#define RTE_LIBRTE_PMD_SZEDATA2 +#endif + +#ifdef RTE_LIBRTE_TAP_PMD +#define RTE_LIBRTE_PMD_TAP +#endif + +#ifdef RTE_LIBRTE_THUNDERX_PMD +#define RTE_LIBRTE_THUNDERX_NICVF_PMD +#endif + +#ifdef RTE_LIBRTE_VHOST_PMD +#define RTE_LIBRTE_PMD_VHOST +#endif + +#ifdef RTE_LIBRTE_PMD_ARMV8 +#define RTE_LIBRTE_PMD_ARMV8_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_MVSAM +#define RTE_LIBRTE_PMD_MVSAM_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS +#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV +#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF +#endif + diff --git a/config/rte_config.h b/config/rte_config.h index 03d90d78b..1bebab335 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,6 +13,7 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> +#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index ee883c3f9..bea1720a0 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,5 +8,5 @@ endif drivers = ['isal', 'octeontx', 'qat', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index a2423507a..25b99c19c 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,5 +26,5 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/event/meson.build b/drivers/event/meson.build index ebe76a75c..f2a343147 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/meson.build b/drivers/meson.build index 5f9526557..b5ac483d3 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -117,6 +117,21 @@ foreach subpath:subdirs fmt_name = name endif dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + # for driver compatibility, since we changed the + # default to match that of make. Remove in future release + # after following deprecation process + if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' + or class == 'compress' + or class == 'event') + alt_flag_fmt = '_@0@_PMD'.join( + config_flag_fmt.split('_PMD_@0@')) + if config_flag_fmt.contains('EVENTDEV') + alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( + config_flag_fmt.split('_PMD_@0@_EVENTDEV')) + endif + dpdk_conf.set(alt_flag_fmt.format( + fmt_name.to_upper()), 1) + endif lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build Bruce Richardson @ 2020-10-15 10:31 ` Luca Boccassi 2020-10-15 11:20 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:31 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, stable On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > The defines used to indicate what crypto, compression and eventdev drivers > were being built were different to those used in the make build, with meson > defining them with "_PMD" at the end, while make defined them with "_PMD" > in the middle and the specific driver name at the end. This might cause > compatibility issues for applications which used the older defines, which > switching to build against new DPDK releases. > > As well as changing the default to match that of make, meson also > special-cases the crypto/compression/event drivers to have both defines > provided. This ensures compatibility for these macros with both meson and > make from older versions. > > For a selection of other libraries and drivers, there were other > incompatibilities between the meson and make-defined macros which were not > previously highlighted in a deprecation notice, so we add per-macro > compatibility defines for these to ease the transition from make to meson. > > Fixes: 5b9656b157d3 ("lib: build with meson") > Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") > Fixes: dcadbbde8e61 ("crypto/null: build with meson") > Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") > Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") > > Cc: stable@dpdk.org > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > app/test/meson.build | 1 + > config/meson.build | 3 +- > config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ > config/rte_config.h | 1 + > drivers/compress/meson.build | 2 +- > drivers/crypto/meson.build | 2 +- > drivers/event/meson.build | 2 +- > drivers/meson.build | 15 ++++ > 8 files changed, 151 insertions(+), 4 deletions(-) > create mode 100644 config/rte_compatibility_defines.h > > diff --git a/app/test/meson.build b/app/test/meson.build > index dedf29dd7..fc90a1909 100644 > --- a/app/test/meson.build > +++ b/app/test/meson.build > @@ -415,6 +415,7 @@ endif > > if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') > driver_test_names += 'cryptodev_scheduler_autotest' > + test_deps += 'pmd_crypto_scheduler' > endif > > foreach d:test_deps This change looks out of place in this patch? Was it supposed to be part of one of the previous commits maybe? Other than that, Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build 2020-10-15 10:31 ` Luca Boccassi @ 2020-10-15 11:20 ` Bruce Richardson 0 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:20 UTC (permalink / raw) To: Luca Boccassi Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas, stable On Thu, Oct 15, 2020 at 11:31:18AM +0100, Luca Boccassi wrote: > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > The defines used to indicate what crypto, compression and eventdev drivers > > were being built were different to those used in the make build, with meson > > defining them with "_PMD" at the end, while make defined them with "_PMD" > > in the middle and the specific driver name at the end. This might cause > > compatibility issues for applications which used the older defines, which > > switching to build against new DPDK releases. > > > > As well as changing the default to match that of make, meson also > > special-cases the crypto/compression/event drivers to have both defines > > provided. This ensures compatibility for these macros with both meson and > > make from older versions. > > > > For a selection of other libraries and drivers, there were other > > incompatibilities between the meson and make-defined macros which were not > > previously highlighted in a deprecation notice, so we add per-macro > > compatibility defines for these to ease the transition from make to meson. > > > > Fixes: 5b9656b157d3 ("lib: build with meson") > > Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") > > Fixes: dcadbbde8e61 ("crypto/null: build with meson") > > Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") > > Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") > > > > Cc: stable@dpdk.org > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > --- > > app/test/meson.build | 1 + > > config/meson.build | 3 +- > > config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ > > config/rte_config.h | 1 + > > drivers/compress/meson.build | 2 +- > > drivers/crypto/meson.build | 2 +- > > drivers/event/meson.build | 2 +- > > drivers/meson.build | 15 ++++ > > 8 files changed, 151 insertions(+), 4 deletions(-) > > create mode 100644 config/rte_compatibility_defines.h > > > > diff --git a/app/test/meson.build b/app/test/meson.build > > index dedf29dd7..fc90a1909 100644 > > --- a/app/test/meson.build > > +++ b/app/test/meson.build > > @@ -415,6 +415,7 @@ endif > > > > if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') > > driver_test_names += 'cryptodev_scheduler_autotest' > > + test_deps += 'pmd_crypto_scheduler' > > endif > > > > foreach d:test_deps > > This change looks out of place in this patch? Was it supposed to be > part of one of the previous commits maybe? > > Other than that, > > Acked-by: Luca Boccassi <bluca@debian.org> > Yes, it looks like it probably should be. I'll investigate and do a v5 (since I had v4 already done before I saw this comment!) /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 4/7] qat: build from common folder 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson ` (2 preceding siblings ...) 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build Bruce Richardson @ 2020-10-14 14:13 ` Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename Bruce Richardson ` (2 subsequent siblings) 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:13 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders. This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- drivers/common/meson.build | 2 +- drivers/common/qat/meson.build | 69 ++++++++++++++++--- .../qat/rte_common_qat_version.map} | 0 drivers/compress/meson.build | 2 +- drivers/compress/qat/meson.build | 17 ----- drivers/crypto/meson.build | 1 - drivers/crypto/qat/meson.build | 23 ------- drivers/meson.build | 1 + 8 files changed, 63 insertions(+), 52 deletions(-) rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build delete mode 100644 drivers/crypto/qat/meson.build diff --git a/drivers/common/meson.build b/drivers/common/meson.build index 7ac1ca73a..abb4f1529 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -6,6 +6,6 @@ if is_windows endif std_deps = ['eal'] -drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx'] +drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 8de249289..3409162d0 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -1,15 +1,66 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2018 Intel Corporation -# This does not build a driver, but instead holds common files for -# the crypto and compression drivers. -build = false -reason = '' # sentinal value to suppress printout -qat_deps = ['bus_pci'] -qat_sources = files('qat_common.c', +config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' +driver_name_fmt = 'rte_common_@0@' + +qat_crypto = true +qat_crypto_path = 'crypto/qat' +qat_crypto_relpath = '../../' + qat_crypto_path +qat_compress = true +qat_compress_path = 'compress/qat' +qat_compress_relpath = '../../' + qat_compress_path + +if disabled_drivers.contains(qat_crypto_path) + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif +if disabled_drivers.contains(qat_compress_path) + qat_compress = false + dpdk_drvs_disabled += qat_compress_path + set_variable(qat_compress_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif + +libcrypto = dependency('libcrypto', required: false) +if qat_crypto and not libcrypto.found() + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'missing dependency, libcrypto') +endif + +# The driver should not build if both compression and crypto are disabled +#FIXME common code depends on compression files so check only compress! +if not qat_compress # and not qat_crypto + build = false + reason = '' # rely on reason for compress/crypto above + subdir_done() +endif + +deps += ['bus_pci', 'cryptodev', 'net', 'compressdev'] +sources += files('qat_common.c', 'qat_qp.c', 'qat_device.c', 'qat_logs.c') -qat_includes = [include_directories('.', 'qat_adf')] -qat_ext_deps = [] -qat_cflags = [] +includes += include_directories('qat_adf', + qat_crypto_relpath, + qat_compress_relpath) + +if qat_compress + foreach f: ['qat_comp_pmd.c', 'qat_comp.c'] + sources += files(join_paths(qat_compress_relpath, f)) + endforeach +endif + +if qat_crypto + foreach f: ['qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c', + 'qat_asym_pmd.c', 'qat_asym.c'] + sources += files(join_paths(qat_crypto_relpath, f)) + endforeach + deps += ['security'] + ext_deps += libcrypto + cflags += ['-DBUILD_QAT_SYM', '-DBUILD_QAT_ASYM'] +endif diff --git a/drivers/compress/qat/rte_pmd_qat_version.map b/drivers/common/qat/rte_common_qat_version.map similarity index 100% rename from drivers/compress/qat/rte_pmd_qat_version.map rename to drivers/common/qat/rte_common_qat_version.map diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index bea1720a0..3a4723c0c 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -5,7 +5,7 @@ if is_windows subdir_done() endif -drivers = ['isal', 'octeontx', 'qat', 'zlib'] +drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/compress/qat/meson.build b/drivers/compress/qat/meson.build deleted file mode 100644 index a00246980..000000000 --- a/drivers/compress/qat/meson.build +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - - -# Add our sources files to the list -qat_sources += files('qat_comp_pmd.c', - 'qat_comp.c') -qat_includes += include_directories('.') -qat_deps += 'compressdev' -qat_ext_deps += dep - -# build the whole driver -sources += qat_sources -cflags += qat_cflags -deps += qat_deps -ext_deps += qat_ext_deps -includes += qat_includes diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 25b99c19c..bd7a940e6 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -19,7 +19,6 @@ drivers = ['aesni_gcm', 'octeontx', 'octeontx2', 'openssl', - 'qat', 'scheduler', 'snow3g', 'virtio', diff --git a/drivers/crypto/qat/meson.build b/drivers/crypto/qat/meson.build deleted file mode 100644 index a225f374a..000000000 --- a/drivers/crypto/qat/meson.build +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - -# this does not build the QAT driver, instead that is done in the compression -# driver which comes later. Here we just add our sources files to the list -build = false -reason = '' # sentinal value to suppress printout -dep = dependency('libcrypto', required: false) -qat_includes += include_directories('.') -qat_deps += 'cryptodev' -qat_deps += 'net' -qat_deps += 'security' -if dep.found() - # Add our sources files to the list - qat_sources += files('qat_sym_pmd.c', - 'qat_sym.c', - 'qat_sym_session.c', - 'qat_asym_pmd.c', - 'qat_asym.c') - qat_ext_deps += dep - qat_cflags += '-DBUILD_QAT_SYM' - qat_cflags += '-DBUILD_QAT_ASYM' -endif diff --git a/drivers/meson.build b/drivers/meson.build index b5ac483d3..b95b00583 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -6,6 +6,7 @@ subdirs = [ 'common', 'bus', 'common/mlx5', # depends on bus. + 'common/qat', # depends on bus. 'mempool', # depends on common and bus. 'net', # depends on common, bus, mempool 'raw', # depends on common, bus and net. -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 4/7] qat: build from common folder 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 4/7] qat: build from common folder Bruce Richardson @ 2020-10-15 10:32 ` Luca Boccassi 0 siblings, 0 replies; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:32 UTC (permalink / raw) To: Bruce Richardson, dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > Since the drivers in the common directory can be processed out of order, in > this case following the "bus" directory, we can simplify somewhat the build > of the QAT driver to be done entirely from the "common/qat" folder rather > than having it's build distributed across 3 folders. > > This also opens up the possibility of building the QAT driver with crypto > only and the compression part disabled. It further allows more sensible > naming of the resulting shared library in case of standardizing library > names based on device class; i.e. common_qat is more descriptive for a > combined crypto/compression driver than either of the other two prefixes > individually. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > drivers/common/meson.build | 2 +- > drivers/common/qat/meson.build | 69 ++++++++++++++++--- > .../qat/rte_common_qat_version.map} | 0 > drivers/compress/meson.build | 2 +- > drivers/compress/qat/meson.build | 17 ----- > drivers/crypto/meson.build | 1 - > drivers/crypto/qat/meson.build | 23 ------- > drivers/meson.build | 1 + > 8 files changed, 63 insertions(+), 52 deletions(-) > rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%) > delete mode 100644 drivers/compress/qat/meson.build > delete mode 100644 drivers/crypto/qat/meson.build Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson ` (3 preceding siblings ...) 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 4/7] qat: build from common folder Bruce Richardson @ 2020-10-14 14:13 ` Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines Bruce Richardson 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros Bruce Richardson 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:13 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} | 0 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} | 0 .../null/{rte_pmd_bbdev_null_version.map => version.map} | 0 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map} | 0 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} | 0 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/pci/{rte_bus_pci_version.map => version.map} | 0 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} | 0 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} | 0 .../common/cpt/{rte_common_cpt_version.map => version.map} | 0 .../dpaax/{rte_common_dpaax_version.map => version.map} | 0 .../common/iavf/{rte_common_iavf_version.map => version.map} | 0 .../common/mlx5/{rte_common_mlx5_version.map => version.map} | 0 .../common/mvep/{rte_common_mvep_version.map => version.map} | 0 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0 .../{rte_common_octeontx2_version.map => version.map} | 0 .../common/qat/{rte_common_qat_version.map => version.map} | 0 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map} | 0 .../compress/isal/{rte_pmd_isal_version.map => version.map} | 0 .../{rte_pmd_octeontx_compress_version.map => version.map} | 0 .../compress/zlib/{rte_pmd_zlib_version.map => version.map} | 0 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} | 0 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} | 0 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map} | 0 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map} | 0 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} | 0 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} | 0 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} | 0 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} | 0 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0 .../null/{rte_pmd_null_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx2_crypto_version.map => version.map} | 0 .../openssl/{rte_pmd_openssl_version.map => version.map} | 0 .../{rte_pmd_crypto_scheduler_version.map => version.map} | 0 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} | 0 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map} | 0 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} | 0 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map} | 0 .../{rte_pmd_octeontx_event_version.map => version.map} | 0 .../{rte_pmd_octeontx2_event_version.map => version.map} | 0 .../opdl/{rte_pmd_opdl_event_version.map => version.map} | 0 .../{rte_pmd_skeleton_event_version.map => version.map} | 0 .../event/sw/{rte_pmd_sw_event_version.map => version.map} | 0 .../bucket/{rte_mempool_bucket_version.map => version.map} | 0 .../dpaa/{rte_mempool_dpaa_version.map => version.map} | 0 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map} | 0 .../{rte_mempool_octeontx_version.map => version.map} | 0 .../{rte_mempool_octeontx2_version.map => version.map} | 0 .../ring/{rte_mempool_ring_version.map => version.map} | 0 .../stack/{rte_mempool_stack_version.map => version.map} | 0 drivers/meson.build | 4 ++-- .../af_packet/{rte_pmd_af_packet_version.map => version.map} | 0 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} | 0 drivers/net/ark/{rte_pmd_ark_version.map => version.map} | 0 .../atlantic/{rte_pmd_atlantic_version.map => version.map} | 0 drivers/net/avp/{rte_pmd_avp_version.map => version.map} | 0 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} | 0 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} | 0 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} | 0 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} | 0 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} | 0 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} | 0 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} | 0 drivers/net/ena/{rte_pmd_ena_version.map => version.map} | 0 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} | 0 drivers/net/enic/{rte_pmd_enic_version.map => version.map} | 0 .../failsafe/{rte_pmd_failsafe_version.map => version.map} | 0 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} | 0 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} | 0 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} | 0 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} | 0 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} | 0 drivers/net/ice/{rte_pmd_ice_version.map => version.map} | 0 drivers/net/igc/{rte_pmd_igc_version.map => version.map} | 0 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} | 0 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/{rte_pmd_kni_version.map => version.map} | 0 .../liquidio/{rte_pmd_liquidio_version.map => version.map} | 0 drivers/net/memif/{rte_pmd_memif_version.map => version.map} | 0 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} | 0 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} | 0 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map} | 0 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} | 0 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map} | 0 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} | 0 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} | 0 drivers/net/null/{rte_pmd_null_version.map => version.map} | 0 .../octeontx/{rte_pmd_octeontx_version.map => version.map} | 0 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map} | 0 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} | 0 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} | 0 drivers/net/qede/{rte_pmd_qede_version.map => version.map} | 0 drivers/net/ring/{rte_pmd_ring_version.map => version.map} | 0 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} | 0 .../net/softnic/{rte_pmd_softnic_version.map => version.map} | 0 .../szedata2/{rte_pmd_szedata2_version.map => version.map} | 0 drivers/net/tap/{rte_pmd_tap_version.map => version.map} | 0 .../thunderx/{rte_pmd_thunderx_version.map => version.map} | 0 .../{rte_pmd_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} | 0 .../net/virtio/{rte_pmd_virtio_version.map => version.map} | 0 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_qdma_version.map => version.map} | 0 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} | 0 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_dma_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_ep_version.map => version.map} | 0 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map} | 0 .../{rte_pmd_octeontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} | 0 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} | 0 lib/librte_acl/{rte_acl_version.map => version.map} | 0 lib/librte_bbdev/{rte_bbdev_version.map => version.map} | 0 .../{rte_bitratestats_version.map => version.map} | 0 lib/librte_bpf/{rte_bpf_version.map => version.map} | 0 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} | 0 lib/librte_cmdline/{rte_cmdline_version.map => version.map} | 0 .../{rte_compressdev_version.map => version.map} | 0 .../{rte_cryptodev_version.map => version.map} | 0 .../{rte_distributor_version.map => version.map} | 0 lib/librte_eal/{rte_eal_version.map => version.map} | 0 lib/librte_efd/{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/{rte_ethdev_version.map => version.map} | 0 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0 lib/librte_fib/{rte_fib_version.map => version.map} | 0 .../{rte_flow_classify_version.map => version.map} | 0 lib/librte_graph/{rte_graph_version.map => version.map} | 0 lib/librte_gro/{rte_gro_version.map => version.map} | 0 lib/librte_gso/{rte_gso_version.map => version.map} | 0 lib/librte_hash/{rte_hash_version.map => version.map} | 0 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} | 0 lib/librte_ipsec/{rte_ipsec_version.map => version.map} | 0 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0 lib/librte_kni/{rte_kni_version.map => version.map} | 0 lib/librte_kvargs/{rte_kvargs_version.map => version.map} | 0 .../{rte_latencystats_version.map => version.map} | 0 lib/librte_lpm/{rte_lpm_version.map => version.map} | 0 lib/librte_mbuf/{rte_mbuf_version.map => version.map} | 0 lib/librte_member/{rte_member_version.map => version.map} | 0 lib/librte_mempool/{rte_mempool_version.map => version.map} | 0 lib/librte_meter/{rte_meter_version.map => version.map} | 0 lib/librte_metrics/{rte_metrics_version.map => version.map} | 0 lib/librte_net/{rte_net_version.map => version.map} | 0 lib/librte_node/{rte_node_version.map => version.map} | 0 lib/librte_pci/{rte_pci_version.map => version.map} | 0 lib/librte_pdump/{rte_pdump_version.map => version.map} | 0 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0 lib/librte_port/{rte_port_version.map => version.map} | 0 lib/librte_power/{rte_power_version.map => version.map} | 0 lib/librte_rawdev/{rte_rawdev_version.map => version.map} | 0 lib/librte_rcu/{rte_rcu_version.map => version.map} | 0 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0 lib/librte_reorder/{rte_reorder_version.map => version.map} | 0 lib/librte_rib/{rte_rib_version.map => version.map} | 0 lib/librte_ring/{rte_ring_version.map => version.map} | 0 lib/librte_sched/{rte_sched_version.map => version.map} | 0 lib/librte_security/{rte_security_version.map => version.map} | 0 lib/librte_stack/{rte_stack_version.map => version.map} | 0 lib/librte_table/{rte_table_version.map => version.map} | 0 .../{rte_telemetry_version.map => version.map} | 0 lib/librte_timer/{rte_timer_version.map => version.map} | 0 lib/librte_vhost/{rte_vhost_version.map => version.map} | 0 lib/meson.build | 4 ++-- 173 files changed, 4 insertions(+), 4 deletions(-) rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%) rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%) rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/version.map similarity index 100% rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map rename to drivers/baseband/fpga_5gnr_fec/version.map diff --git a/drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map b/drivers/baseband/fpga_lte_fec/version.map similarity index 100% rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map rename to drivers/baseband/fpga_lte_fec/version.map diff --git a/drivers/baseband/null/rte_pmd_bbdev_null_version.map b/drivers/baseband/null/version.map similarity index 100% rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map rename to drivers/baseband/null/version.map diff --git a/drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map b/drivers/baseband/turbo_sw/version.map similarity index 100% rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map rename to drivers/baseband/turbo_sw/version.map diff --git a/drivers/bus/dpaa/rte_bus_dpaa_version.map b/drivers/bus/dpaa/version.map similarity index 100% rename from drivers/bus/dpaa/rte_bus_dpaa_version.map rename to drivers/bus/dpaa/version.map diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/version.map similarity index 100% rename from drivers/bus/fslmc/rte_bus_fslmc_version.map rename to drivers/bus/fslmc/version.map diff --git a/drivers/bus/ifpga/rte_bus_ifpga_version.map b/drivers/bus/ifpga/version.map similarity index 100% rename from drivers/bus/ifpga/rte_bus_ifpga_version.map rename to drivers/bus/ifpga/version.map diff --git a/drivers/bus/pci/rte_bus_pci_version.map b/drivers/bus/pci/version.map similarity index 100% rename from drivers/bus/pci/rte_bus_pci_version.map rename to drivers/bus/pci/version.map diff --git a/drivers/bus/vdev/rte_bus_vdev_version.map b/drivers/bus/vdev/version.map similarity index 100% rename from drivers/bus/vdev/rte_bus_vdev_version.map rename to drivers/bus/vdev/version.map diff --git a/drivers/bus/vmbus/rte_bus_vmbus_version.map b/drivers/bus/vmbus/version.map similarity index 100% rename from drivers/bus/vmbus/rte_bus_vmbus_version.map rename to drivers/bus/vmbus/version.map diff --git a/drivers/common/cpt/rte_common_cpt_version.map b/drivers/common/cpt/version.map similarity index 100% rename from drivers/common/cpt/rte_common_cpt_version.map rename to drivers/common/cpt/version.map diff --git a/drivers/common/dpaax/rte_common_dpaax_version.map b/drivers/common/dpaax/version.map similarity index 100% rename from drivers/common/dpaax/rte_common_dpaax_version.map rename to drivers/common/dpaax/version.map diff --git a/drivers/common/iavf/rte_common_iavf_version.map b/drivers/common/iavf/version.map similarity index 100% rename from drivers/common/iavf/rte_common_iavf_version.map rename to drivers/common/iavf/version.map diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map b/drivers/common/mlx5/version.map similarity index 100% rename from drivers/common/mlx5/rte_common_mlx5_version.map rename to drivers/common/mlx5/version.map diff --git a/drivers/common/mvep/rte_common_mvep_version.map b/drivers/common/mvep/version.map similarity index 100% rename from drivers/common/mvep/rte_common_mvep_version.map rename to drivers/common/mvep/version.map diff --git a/drivers/common/octeontx/rte_common_octeontx_version.map b/drivers/common/octeontx/version.map similarity index 100% rename from drivers/common/octeontx/rte_common_octeontx_version.map rename to drivers/common/octeontx/version.map diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/version.map similarity index 100% rename from drivers/common/octeontx2/rte_common_octeontx2_version.map rename to drivers/common/octeontx2/version.map diff --git a/drivers/common/qat/rte_common_qat_version.map b/drivers/common/qat/version.map similarity index 100% rename from drivers/common/qat/rte_common_qat_version.map rename to drivers/common/qat/version.map diff --git a/drivers/common/sfc_efx/rte_common_sfc_efx_version.map b/drivers/common/sfc_efx/version.map similarity index 100% rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map rename to drivers/common/sfc_efx/version.map diff --git a/drivers/compress/isal/rte_pmd_isal_version.map b/drivers/compress/isal/version.map similarity index 100% rename from drivers/compress/isal/rte_pmd_isal_version.map rename to drivers/compress/isal/version.map diff --git a/drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map b/drivers/compress/octeontx/version.map similarity index 100% rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map rename to drivers/compress/octeontx/version.map diff --git a/drivers/compress/zlib/rte_pmd_zlib_version.map b/drivers/compress/zlib/version.map similarity index 100% rename from drivers/compress/zlib/rte_pmd_zlib_version.map rename to drivers/compress/zlib/version.map diff --git a/drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map b/drivers/crypto/aesni_gcm/version.map similarity index 100% rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map rename to drivers/crypto/aesni_gcm/version.map diff --git a/drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map b/drivers/crypto/aesni_mb/version.map similarity index 100% rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map rename to drivers/crypto/aesni_mb/version.map diff --git a/drivers/crypto/armv8/rte_pmd_armv8_version.map b/drivers/crypto/armv8/version.map similarity index 100% rename from drivers/crypto/armv8/rte_pmd_armv8_version.map rename to drivers/crypto/armv8/version.map diff --git a/drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map b/drivers/crypto/caam_jr/version.map similarity index 100% rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map rename to drivers/crypto/caam_jr/version.map diff --git a/drivers/crypto/ccp/rte_pmd_ccp_version.map b/drivers/crypto/ccp/version.map similarity index 100% rename from drivers/crypto/ccp/rte_pmd_ccp_version.map rename to drivers/crypto/ccp/version.map diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/version.map similarity index 100% rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map rename to drivers/crypto/dpaa2_sec/version.map diff --git a/drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map b/drivers/crypto/dpaa_sec/version.map similarity index 100% rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map rename to drivers/crypto/dpaa_sec/version.map diff --git a/drivers/crypto/kasumi/rte_pmd_kasumi_version.map b/drivers/crypto/kasumi/version.map similarity index 100% rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map rename to drivers/crypto/kasumi/version.map diff --git a/drivers/crypto/mvsam/rte_pmd_mvsam_version.map b/drivers/crypto/mvsam/version.map similarity index 100% rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map rename to drivers/crypto/mvsam/version.map diff --git a/drivers/crypto/nitrox/rte_pmd_nitrox_version.map b/drivers/crypto/nitrox/version.map similarity index 100% rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map rename to drivers/crypto/nitrox/version.map diff --git a/drivers/crypto/null/rte_pmd_null_crypto_version.map b/drivers/crypto/null/version.map similarity index 100% rename from drivers/crypto/null/rte_pmd_null_crypto_version.map rename to drivers/crypto/null/version.map diff --git a/drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map b/drivers/crypto/octeontx/version.map similarity index 100% rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map rename to drivers/crypto/octeontx/version.map diff --git a/drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map b/drivers/crypto/octeontx2/version.map similarity index 100% rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map rename to drivers/crypto/octeontx2/version.map diff --git a/drivers/crypto/openssl/rte_pmd_openssl_version.map b/drivers/crypto/openssl/version.map similarity index 100% rename from drivers/crypto/openssl/rte_pmd_openssl_version.map rename to drivers/crypto/openssl/version.map diff --git a/drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map b/drivers/crypto/scheduler/version.map similarity index 100% rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map rename to drivers/crypto/scheduler/version.map diff --git a/drivers/crypto/snow3g/rte_pmd_snow3g_version.map b/drivers/crypto/snow3g/version.map similarity index 100% rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map rename to drivers/crypto/snow3g/version.map diff --git a/drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map b/drivers/crypto/virtio/version.map similarity index 100% rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map rename to drivers/crypto/virtio/version.map diff --git a/drivers/crypto/zuc/rte_pmd_zuc_version.map b/drivers/crypto/zuc/version.map similarity index 100% rename from drivers/crypto/zuc/rte_pmd_zuc_version.map rename to drivers/crypto/zuc/version.map diff --git a/drivers/event/dpaa/rte_pmd_dpaa_event_version.map b/drivers/event/dpaa/version.map similarity index 100% rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map rename to drivers/event/dpaa/version.map diff --git a/drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map b/drivers/event/dpaa2/version.map similarity index 100% rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map rename to drivers/event/dpaa2/version.map diff --git a/drivers/event/dsw/rte_pmd_dsw_event_version.map b/drivers/event/dsw/version.map similarity index 100% rename from drivers/event/dsw/rte_pmd_dsw_event_version.map rename to drivers/event/dsw/version.map diff --git a/drivers/event/octeontx/rte_pmd_octeontx_event_version.map b/drivers/event/octeontx/version.map similarity index 100% rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map rename to drivers/event/octeontx/version.map diff --git a/drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map b/drivers/event/octeontx2/version.map similarity index 100% rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map rename to drivers/event/octeontx2/version.map diff --git a/drivers/event/opdl/rte_pmd_opdl_event_version.map b/drivers/event/opdl/version.map similarity index 100% rename from drivers/event/opdl/rte_pmd_opdl_event_version.map rename to drivers/event/opdl/version.map diff --git a/drivers/event/skeleton/rte_pmd_skeleton_event_version.map b/drivers/event/skeleton/version.map similarity index 100% rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map rename to drivers/event/skeleton/version.map diff --git a/drivers/event/sw/rte_pmd_sw_event_version.map b/drivers/event/sw/version.map similarity index 100% rename from drivers/event/sw/rte_pmd_sw_event_version.map rename to drivers/event/sw/version.map diff --git a/drivers/mempool/bucket/rte_mempool_bucket_version.map b/drivers/mempool/bucket/version.map similarity index 100% rename from drivers/mempool/bucket/rte_mempool_bucket_version.map rename to drivers/mempool/bucket/version.map diff --git a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map b/drivers/mempool/dpaa/version.map similarity index 100% rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map rename to drivers/mempool/dpaa/version.map diff --git a/drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map b/drivers/mempool/dpaa2/version.map similarity index 100% rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map rename to drivers/mempool/dpaa2/version.map diff --git a/drivers/mempool/octeontx/rte_mempool_octeontx_version.map b/drivers/mempool/octeontx/version.map similarity index 100% rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map rename to drivers/mempool/octeontx/version.map diff --git a/drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map b/drivers/mempool/octeontx2/version.map similarity index 100% rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map rename to drivers/mempool/octeontx2/version.map diff --git a/drivers/mempool/ring/rte_mempool_ring_version.map b/drivers/mempool/ring/version.map similarity index 100% rename from drivers/mempool/ring/rte_mempool_ring_version.map rename to drivers/mempool/ring/version.map diff --git a/drivers/mempool/stack/rte_mempool_stack_version.map b/drivers/mempool/stack/version.map similarity index 100% rename from drivers/mempool/stack/rte_mempool_stack_version.map rename to drivers/mempool/stack/version.map diff --git a/drivers/meson.build b/drivers/meson.build index b95b00583..3d4bbff13 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -166,9 +166,9 @@ foreach subpath:subdirs install: true) # now build the shared driver - version_map = '@0@/@1@/@2@_version.map'.format( + version_map = '@0@/@1@/version.map'.format( meson.current_source_dir(), - drv_path, lib_name) + drv_path) implib = 'lib' + lib_name + '.dll.a' def_file = custom_target(lib_name + '_def', diff --git a/drivers/net/af_packet/rte_pmd_af_packet_version.map b/drivers/net/af_packet/version.map similarity index 100% rename from drivers/net/af_packet/rte_pmd_af_packet_version.map rename to drivers/net/af_packet/version.map diff --git a/drivers/net/af_xdp/rte_pmd_af_xdp_version.map b/drivers/net/af_xdp/version.map similarity index 100% rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map rename to drivers/net/af_xdp/version.map diff --git a/drivers/net/ark/rte_pmd_ark_version.map b/drivers/net/ark/version.map similarity index 100% rename from drivers/net/ark/rte_pmd_ark_version.map rename to drivers/net/ark/version.map diff --git a/drivers/net/atlantic/rte_pmd_atlantic_version.map b/drivers/net/atlantic/version.map similarity index 100% rename from drivers/net/atlantic/rte_pmd_atlantic_version.map rename to drivers/net/atlantic/version.map diff --git a/drivers/net/avp/rte_pmd_avp_version.map b/drivers/net/avp/version.map similarity index 100% rename from drivers/net/avp/rte_pmd_avp_version.map rename to drivers/net/avp/version.map diff --git a/drivers/net/axgbe/rte_pmd_axgbe_version.map b/drivers/net/axgbe/version.map similarity index 100% rename from drivers/net/axgbe/rte_pmd_axgbe_version.map rename to drivers/net/axgbe/version.map diff --git a/drivers/net/bnx2x/rte_pmd_bnx2x_version.map b/drivers/net/bnx2x/version.map similarity index 100% rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map rename to drivers/net/bnx2x/version.map diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/version.map similarity index 100% rename from drivers/net/bnxt/rte_pmd_bnxt_version.map rename to drivers/net/bnxt/version.map diff --git a/drivers/net/bonding/rte_pmd_bond_version.map b/drivers/net/bonding/version.map similarity index 100% rename from drivers/net/bonding/rte_pmd_bond_version.map rename to drivers/net/bonding/version.map diff --git a/drivers/net/cxgbe/rte_pmd_cxgbe_version.map b/drivers/net/cxgbe/version.map similarity index 100% rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map rename to drivers/net/cxgbe/version.map diff --git a/drivers/net/dpaa/rte_pmd_dpaa_version.map b/drivers/net/dpaa/version.map similarity index 100% rename from drivers/net/dpaa/rte_pmd_dpaa_version.map rename to drivers/net/dpaa/version.map diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map b/drivers/net/dpaa2/version.map similarity index 100% rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map rename to drivers/net/dpaa2/version.map diff --git a/drivers/net/e1000/rte_pmd_e1000_version.map b/drivers/net/e1000/version.map similarity index 100% rename from drivers/net/e1000/rte_pmd_e1000_version.map rename to drivers/net/e1000/version.map diff --git a/drivers/net/ena/rte_pmd_ena_version.map b/drivers/net/ena/version.map similarity index 100% rename from drivers/net/ena/rte_pmd_ena_version.map rename to drivers/net/ena/version.map diff --git a/drivers/net/enetc/rte_pmd_enetc_version.map b/drivers/net/enetc/version.map similarity index 100% rename from drivers/net/enetc/rte_pmd_enetc_version.map rename to drivers/net/enetc/version.map diff --git a/drivers/net/enic/rte_pmd_enic_version.map b/drivers/net/enic/version.map similarity index 100% rename from drivers/net/enic/rte_pmd_enic_version.map rename to drivers/net/enic/version.map diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/version.map similarity index 100% rename from drivers/net/failsafe/rte_pmd_failsafe_version.map rename to drivers/net/failsafe/version.map diff --git a/drivers/net/fm10k/rte_pmd_fm10k_version.map b/drivers/net/fm10k/version.map similarity index 100% rename from drivers/net/fm10k/rte_pmd_fm10k_version.map rename to drivers/net/fm10k/version.map diff --git a/drivers/net/hinic/rte_pmd_hinic_version.map b/drivers/net/hinic/version.map similarity index 100% rename from drivers/net/hinic/rte_pmd_hinic_version.map rename to drivers/net/hinic/version.map diff --git a/drivers/net/hns3/rte_pmd_hns3_version.map b/drivers/net/hns3/version.map similarity index 100% rename from drivers/net/hns3/rte_pmd_hns3_version.map rename to drivers/net/hns3/version.map diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/version.map similarity index 100% rename from drivers/net/i40e/rte_pmd_i40e_version.map rename to drivers/net/i40e/version.map diff --git a/drivers/net/iavf/rte_pmd_iavf_version.map b/drivers/net/iavf/version.map similarity index 100% rename from drivers/net/iavf/rte_pmd_iavf_version.map rename to drivers/net/iavf/version.map diff --git a/drivers/net/ice/rte_pmd_ice_version.map b/drivers/net/ice/version.map similarity index 100% rename from drivers/net/ice/rte_pmd_ice_version.map rename to drivers/net/ice/version.map diff --git a/drivers/net/igc/rte_pmd_igc_version.map b/drivers/net/igc/version.map similarity index 100% rename from drivers/net/igc/rte_pmd_igc_version.map rename to drivers/net/igc/version.map diff --git a/drivers/net/ionic/rte_pmd_ionic_version.map b/drivers/net/ionic/version.map similarity index 100% rename from drivers/net/ionic/rte_pmd_ionic_version.map rename to drivers/net/ionic/version.map diff --git a/drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map b/drivers/net/ipn3ke/version.map similarity index 100% rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map rename to drivers/net/ipn3ke/version.map diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/version.map similarity index 100% rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map rename to drivers/net/ixgbe/version.map diff --git a/drivers/net/kni/rte_pmd_kni_version.map b/drivers/net/kni/version.map similarity index 100% rename from drivers/net/kni/rte_pmd_kni_version.map rename to drivers/net/kni/version.map diff --git a/drivers/net/liquidio/rte_pmd_liquidio_version.map b/drivers/net/liquidio/version.map similarity index 100% rename from drivers/net/liquidio/rte_pmd_liquidio_version.map rename to drivers/net/liquidio/version.map diff --git a/drivers/net/memif/rte_pmd_memif_version.map b/drivers/net/memif/version.map similarity index 100% rename from drivers/net/memif/rte_pmd_memif_version.map rename to drivers/net/memif/version.map diff --git a/drivers/net/mlx4/rte_pmd_mlx4_version.map b/drivers/net/mlx4/version.map similarity index 100% rename from drivers/net/mlx4/rte_pmd_mlx4_version.map rename to drivers/net/mlx4/version.map diff --git a/drivers/net/mlx5/rte_pmd_mlx5_version.map b/drivers/net/mlx5/version.map similarity index 100% rename from drivers/net/mlx5/rte_pmd_mlx5_version.map rename to drivers/net/mlx5/version.map diff --git a/drivers/net/mvneta/rte_pmd_mvneta_version.map b/drivers/net/mvneta/version.map similarity index 100% rename from drivers/net/mvneta/rte_pmd_mvneta_version.map rename to drivers/net/mvneta/version.map diff --git a/drivers/net/mvpp2/rte_pmd_mvpp2_version.map b/drivers/net/mvpp2/version.map similarity index 100% rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map rename to drivers/net/mvpp2/version.map diff --git a/drivers/net/netvsc/rte_pmd_netvsc_version.map b/drivers/net/netvsc/version.map similarity index 100% rename from drivers/net/netvsc/rte_pmd_netvsc_version.map rename to drivers/net/netvsc/version.map diff --git a/drivers/net/nfb/rte_pmd_nfb_version.map b/drivers/net/nfb/version.map similarity index 100% rename from drivers/net/nfb/rte_pmd_nfb_version.map rename to drivers/net/nfb/version.map diff --git a/drivers/net/nfp/rte_pmd_nfp_version.map b/drivers/net/nfp/version.map similarity index 100% rename from drivers/net/nfp/rte_pmd_nfp_version.map rename to drivers/net/nfp/version.map diff --git a/drivers/net/null/rte_pmd_null_version.map b/drivers/net/null/version.map similarity index 100% rename from drivers/net/null/rte_pmd_null_version.map rename to drivers/net/null/version.map diff --git a/drivers/net/octeontx/rte_pmd_octeontx_version.map b/drivers/net/octeontx/version.map similarity index 100% rename from drivers/net/octeontx/rte_pmd_octeontx_version.map rename to drivers/net/octeontx/version.map diff --git a/drivers/net/octeontx2/rte_pmd_octeontx2_version.map b/drivers/net/octeontx2/version.map similarity index 100% rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map rename to drivers/net/octeontx2/version.map diff --git a/drivers/net/pcap/rte_pmd_pcap_version.map b/drivers/net/pcap/version.map similarity index 100% rename from drivers/net/pcap/rte_pmd_pcap_version.map rename to drivers/net/pcap/version.map diff --git a/drivers/net/pfe/rte_pmd_pfe_version.map b/drivers/net/pfe/version.map similarity index 100% rename from drivers/net/pfe/rte_pmd_pfe_version.map rename to drivers/net/pfe/version.map diff --git a/drivers/net/qede/rte_pmd_qede_version.map b/drivers/net/qede/version.map similarity index 100% rename from drivers/net/qede/rte_pmd_qede_version.map rename to drivers/net/qede/version.map diff --git a/drivers/net/ring/rte_pmd_ring_version.map b/drivers/net/ring/version.map similarity index 100% rename from drivers/net/ring/rte_pmd_ring_version.map rename to drivers/net/ring/version.map diff --git a/drivers/net/sfc/rte_pmd_sfc_version.map b/drivers/net/sfc/version.map similarity index 100% rename from drivers/net/sfc/rte_pmd_sfc_version.map rename to drivers/net/sfc/version.map diff --git a/drivers/net/softnic/rte_pmd_softnic_version.map b/drivers/net/softnic/version.map similarity index 100% rename from drivers/net/softnic/rte_pmd_softnic_version.map rename to drivers/net/softnic/version.map diff --git a/drivers/net/szedata2/rte_pmd_szedata2_version.map b/drivers/net/szedata2/version.map similarity index 100% rename from drivers/net/szedata2/rte_pmd_szedata2_version.map rename to drivers/net/szedata2/version.map diff --git a/drivers/net/tap/rte_pmd_tap_version.map b/drivers/net/tap/version.map similarity index 100% rename from drivers/net/tap/rte_pmd_tap_version.map rename to drivers/net/tap/version.map diff --git a/drivers/net/thunderx/rte_pmd_thunderx_version.map b/drivers/net/thunderx/version.map similarity index 100% rename from drivers/net/thunderx/rte_pmd_thunderx_version.map rename to drivers/net/thunderx/version.map diff --git a/drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map b/drivers/net/vdev_netvsc/version.map similarity index 100% rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map rename to drivers/net/vdev_netvsc/version.map diff --git a/drivers/net/vhost/rte_pmd_vhost_version.map b/drivers/net/vhost/version.map similarity index 100% rename from drivers/net/vhost/rte_pmd_vhost_version.map rename to drivers/net/vhost/version.map diff --git a/drivers/net/virtio/rte_pmd_virtio_version.map b/drivers/net/virtio/version.map similarity index 100% rename from drivers/net/virtio/rte_pmd_virtio_version.map rename to drivers/net/virtio/version.map diff --git a/drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map b/drivers/net/vmxnet3/version.map similarity index 100% rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map rename to drivers/net/vmxnet3/version.map diff --git a/drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map b/drivers/raw/dpaa2_cmdif/version.map similarity index 100% rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map rename to drivers/raw/dpaa2_cmdif/version.map diff --git a/drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map b/drivers/raw/dpaa2_qdma/version.map similarity index 100% rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map rename to drivers/raw/dpaa2_qdma/version.map diff --git a/drivers/raw/ifpga/rte_rawdev_ifpga_version.map b/drivers/raw/ifpga/version.map similarity index 100% rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map rename to drivers/raw/ifpga/version.map diff --git a/drivers/raw/ioat/rte_rawdev_ioat_version.map b/drivers/raw/ioat/version.map similarity index 100% rename from drivers/raw/ioat/rte_rawdev_ioat_version.map rename to drivers/raw/ioat/version.map diff --git a/drivers/raw/ntb/rte_rawdev_ntb_version.map b/drivers/raw/ntb/version.map similarity index 100% rename from drivers/raw/ntb/rte_rawdev_ntb_version.map rename to drivers/raw/ntb/version.map diff --git a/drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map b/drivers/raw/octeontx2_dma/version.map similarity index 100% rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map rename to drivers/raw/octeontx2_dma/version.map diff --git a/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map b/drivers/raw/octeontx2_ep/version.map similarity index 100% rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map rename to drivers/raw/octeontx2_ep/version.map diff --git a/drivers/raw/skeleton/rte_rawdev_skeleton_version.map b/drivers/raw/skeleton/version.map similarity index 100% rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map rename to drivers/raw/skeleton/version.map diff --git a/drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map b/drivers/regex/mlx5/version.map similarity index 100% rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map rename to drivers/regex/mlx5/version.map diff --git a/drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map b/drivers/regex/octeontx2/version.map similarity index 100% rename from drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map rename to drivers/regex/octeontx2/version.map diff --git a/drivers/vdpa/ifc/rte_pmd_ifc_version.map b/drivers/vdpa/ifc/version.map similarity index 100% rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map rename to drivers/vdpa/ifc/version.map diff --git a/drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map b/drivers/vdpa/mlx5/version.map similarity index 100% rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map rename to drivers/vdpa/mlx5/version.map diff --git a/lib/librte_acl/rte_acl_version.map b/lib/librte_acl/version.map similarity index 100% rename from lib/librte_acl/rte_acl_version.map rename to lib/librte_acl/version.map diff --git a/lib/librte_bbdev/rte_bbdev_version.map b/lib/librte_bbdev/version.map similarity index 100% rename from lib/librte_bbdev/rte_bbdev_version.map rename to lib/librte_bbdev/version.map diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/version.map similarity index 100% rename from lib/librte_bitratestats/rte_bitratestats_version.map rename to lib/librte_bitratestats/version.map diff --git a/lib/librte_bpf/rte_bpf_version.map b/lib/librte_bpf/version.map similarity index 100% rename from lib/librte_bpf/rte_bpf_version.map rename to lib/librte_bpf/version.map diff --git a/lib/librte_cfgfile/rte_cfgfile_version.map b/lib/librte_cfgfile/version.map similarity index 100% rename from lib/librte_cfgfile/rte_cfgfile_version.map rename to lib/librte_cfgfile/version.map diff --git a/lib/librte_cmdline/rte_cmdline_version.map b/lib/librte_cmdline/version.map similarity index 100% rename from lib/librte_cmdline/rte_cmdline_version.map rename to lib/librte_cmdline/version.map diff --git a/lib/librte_compressdev/rte_compressdev_version.map b/lib/librte_compressdev/version.map similarity index 100% rename from lib/librte_compressdev/rte_compressdev_version.map rename to lib/librte_compressdev/version.map diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/version.map similarity index 100% rename from lib/librte_cryptodev/rte_cryptodev_version.map rename to lib/librte_cryptodev/version.map diff --git a/lib/librte_distributor/rte_distributor_version.map b/lib/librte_distributor/version.map similarity index 100% rename from lib/librte_distributor/rte_distributor_version.map rename to lib/librte_distributor/version.map diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/version.map similarity index 100% rename from lib/librte_eal/rte_eal_version.map rename to lib/librte_eal/version.map diff --git a/lib/librte_efd/rte_efd_version.map b/lib/librte_efd/version.map similarity index 100% rename from lib/librte_efd/rte_efd_version.map rename to lib/librte_efd/version.map diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/version.map similarity index 100% rename from lib/librte_ethdev/rte_ethdev_version.map rename to lib/librte_ethdev/version.map diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/version.map similarity index 100% rename from lib/librte_eventdev/rte_eventdev_version.map rename to lib/librte_eventdev/version.map diff --git a/lib/librte_fib/rte_fib_version.map b/lib/librte_fib/version.map similarity index 100% rename from lib/librte_fib/rte_fib_version.map rename to lib/librte_fib/version.map diff --git a/lib/librte_flow_classify/rte_flow_classify_version.map b/lib/librte_flow_classify/version.map similarity index 100% rename from lib/librte_flow_classify/rte_flow_classify_version.map rename to lib/librte_flow_classify/version.map diff --git a/lib/librte_graph/rte_graph_version.map b/lib/librte_graph/version.map similarity index 100% rename from lib/librte_graph/rte_graph_version.map rename to lib/librte_graph/version.map diff --git a/lib/librte_gro/rte_gro_version.map b/lib/librte_gro/version.map similarity index 100% rename from lib/librte_gro/rte_gro_version.map rename to lib/librte_gro/version.map diff --git a/lib/librte_gso/rte_gso_version.map b/lib/librte_gso/version.map similarity index 100% rename from lib/librte_gso/rte_gso_version.map rename to lib/librte_gso/version.map diff --git a/lib/librte_hash/rte_hash_version.map b/lib/librte_hash/version.map similarity index 100% rename from lib/librte_hash/rte_hash_version.map rename to lib/librte_hash/version.map diff --git a/lib/librte_ip_frag/rte_ip_frag_version.map b/lib/librte_ip_frag/version.map similarity index 100% rename from lib/librte_ip_frag/rte_ip_frag_version.map rename to lib/librte_ip_frag/version.map diff --git a/lib/librte_ipsec/rte_ipsec_version.map b/lib/librte_ipsec/version.map similarity index 100% rename from lib/librte_ipsec/rte_ipsec_version.map rename to lib/librte_ipsec/version.map diff --git a/lib/librte_jobstats/rte_jobstats_version.map b/lib/librte_jobstats/version.map similarity index 100% rename from lib/librte_jobstats/rte_jobstats_version.map rename to lib/librte_jobstats/version.map diff --git a/lib/librte_kni/rte_kni_version.map b/lib/librte_kni/version.map similarity index 100% rename from lib/librte_kni/rte_kni_version.map rename to lib/librte_kni/version.map diff --git a/lib/librte_kvargs/rte_kvargs_version.map b/lib/librte_kvargs/version.map similarity index 100% rename from lib/librte_kvargs/rte_kvargs_version.map rename to lib/librte_kvargs/version.map diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/version.map similarity index 100% rename from lib/librte_latencystats/rte_latencystats_version.map rename to lib/librte_latencystats/version.map diff --git a/lib/librte_lpm/rte_lpm_version.map b/lib/librte_lpm/version.map similarity index 100% rename from lib/librte_lpm/rte_lpm_version.map rename to lib/librte_lpm/version.map diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/version.map similarity index 100% rename from lib/librte_mbuf/rte_mbuf_version.map rename to lib/librte_mbuf/version.map diff --git a/lib/librte_member/rte_member_version.map b/lib/librte_member/version.map similarity index 100% rename from lib/librte_member/rte_member_version.map rename to lib/librte_member/version.map diff --git a/lib/librte_mempool/rte_mempool_version.map b/lib/librte_mempool/version.map similarity index 100% rename from lib/librte_mempool/rte_mempool_version.map rename to lib/librte_mempool/version.map diff --git a/lib/librte_meter/rte_meter_version.map b/lib/librte_meter/version.map similarity index 100% rename from lib/librte_meter/rte_meter_version.map rename to lib/librte_meter/version.map diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/version.map similarity index 100% rename from lib/librte_metrics/rte_metrics_version.map rename to lib/librte_metrics/version.map diff --git a/lib/librte_net/rte_net_version.map b/lib/librte_net/version.map similarity index 100% rename from lib/librte_net/rte_net_version.map rename to lib/librte_net/version.map diff --git a/lib/librte_node/rte_node_version.map b/lib/librte_node/version.map similarity index 100% rename from lib/librte_node/rte_node_version.map rename to lib/librte_node/version.map diff --git a/lib/librte_pci/rte_pci_version.map b/lib/librte_pci/version.map similarity index 100% rename from lib/librte_pci/rte_pci_version.map rename to lib/librte_pci/version.map diff --git a/lib/librte_pdump/rte_pdump_version.map b/lib/librte_pdump/version.map similarity index 100% rename from lib/librte_pdump/rte_pdump_version.map rename to lib/librte_pdump/version.map diff --git a/lib/librte_pipeline/rte_pipeline_version.map b/lib/librte_pipeline/version.map similarity index 100% rename from lib/librte_pipeline/rte_pipeline_version.map rename to lib/librte_pipeline/version.map diff --git a/lib/librte_port/rte_port_version.map b/lib/librte_port/version.map similarity index 100% rename from lib/librte_port/rte_port_version.map rename to lib/librte_port/version.map diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/version.map similarity index 100% rename from lib/librte_power/rte_power_version.map rename to lib/librte_power/version.map diff --git a/lib/librte_rawdev/rte_rawdev_version.map b/lib/librte_rawdev/version.map similarity index 100% rename from lib/librte_rawdev/rte_rawdev_version.map rename to lib/librte_rawdev/version.map diff --git a/lib/librte_rcu/rte_rcu_version.map b/lib/librte_rcu/version.map similarity index 100% rename from lib/librte_rcu/rte_rcu_version.map rename to lib/librte_rcu/version.map diff --git a/lib/librte_regexdev/rte_regexdev_version.map b/lib/librte_regexdev/version.map similarity index 100% rename from lib/librte_regexdev/rte_regexdev_version.map rename to lib/librte_regexdev/version.map diff --git a/lib/librte_reorder/rte_reorder_version.map b/lib/librte_reorder/version.map similarity index 100% rename from lib/librte_reorder/rte_reorder_version.map rename to lib/librte_reorder/version.map diff --git a/lib/librte_rib/rte_rib_version.map b/lib/librte_rib/version.map similarity index 100% rename from lib/librte_rib/rte_rib_version.map rename to lib/librte_rib/version.map diff --git a/lib/librte_ring/rte_ring_version.map b/lib/librte_ring/version.map similarity index 100% rename from lib/librte_ring/rte_ring_version.map rename to lib/librte_ring/version.map diff --git a/lib/librte_sched/rte_sched_version.map b/lib/librte_sched/version.map similarity index 100% rename from lib/librte_sched/rte_sched_version.map rename to lib/librte_sched/version.map diff --git a/lib/librte_security/rte_security_version.map b/lib/librte_security/version.map similarity index 100% rename from lib/librte_security/rte_security_version.map rename to lib/librte_security/version.map diff --git a/lib/librte_stack/rte_stack_version.map b/lib/librte_stack/version.map similarity index 100% rename from lib/librte_stack/rte_stack_version.map rename to lib/librte_stack/version.map diff --git a/lib/librte_table/rte_table_version.map b/lib/librte_table/version.map similarity index 100% rename from lib/librte_table/rte_table_version.map rename to lib/librte_table/version.map diff --git a/lib/librte_telemetry/rte_telemetry_version.map b/lib/librte_telemetry/version.map similarity index 100% rename from lib/librte_telemetry/rte_telemetry_version.map rename to lib/librte_telemetry/version.map diff --git a/lib/librte_timer/rte_timer_version.map b/lib/librte_timer/version.map similarity index 100% rename from lib/librte_timer/rte_timer_version.map rename to lib/librte_timer/version.map diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/version.map similarity index 100% rename from lib/librte_vhost/rte_vhost_version.map rename to lib/librte_vhost/version.map diff --git a/lib/meson.build b/lib/meson.build index e5597f174..8761457c9 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -139,8 +139,8 @@ foreach l:libraries # RTE_BUILD_SHARED_LIB defined cflags += '-DRTE_BUILD_SHARED_LIB' endif - version_map = '@0@/@1@/rte_@2@_version.map'.format( - meson.current_source_dir(), dir_name, name) + version_map = '@0@/@1@/version.map'.format( + meson.current_source_dir(), dir_name) implib = dir_name + '.dll.a' def_file = custom_target(libname + '_def', -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename Bruce Richardson @ 2020-10-15 10:32 ` Luca Boccassi 0 siblings, 0 replies; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:32 UTC (permalink / raw) To: Bruce Richardson, dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > Since each version map file is contained in the subdirectory of the library > it refers to, there is no need to include the library name in the filename. > This makes things simpler in case of library renaming. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson ` (4 preceding siblings ...) 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename Bruce Richardson @ 2020-10-14 14:13 ` Bruce Richardson 2020-10-15 10:30 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros Bruce Richardson 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:13 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros. Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'. Similarly, for libraries, the equivalent name formats and macros are: 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc. To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u --- app/test-bbdev/meson.build | 4 ++-- app/test-crypto-perf/meson.build | 2 +- app/test-pmd/meson.build | 12 ++++++------ app/test/meson.build | 8 ++++---- doc/guides/rel_notes/deprecation.rst | 8 ++++++++ drivers/baseband/meson.build | 1 - drivers/bus/meson.build | 1 - drivers/common/meson.build | 1 - drivers/common/mlx5/meson.build | 1 - drivers/common/qat/meson.build | 1 - drivers/compress/meson.build | 1 - drivers/compress/octeontx/meson.build | 2 +- drivers/crypto/meson.build | 1 - drivers/crypto/null/meson.build | 2 +- drivers/crypto/octeontx/meson.build | 2 +- drivers/crypto/octeontx2/meson.build | 2 +- drivers/crypto/scheduler/meson.build | 2 +- drivers/crypto/virtio/meson.build | 2 +- drivers/event/dpaa/meson.build | 2 +- drivers/event/dpaa2/meson.build | 2 +- drivers/event/meson.build | 1 - drivers/event/octeontx/meson.build | 2 +- drivers/event/octeontx2/meson.build | 2 +- drivers/mempool/meson.build | 1 - drivers/meson.build | 9 ++++----- drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- drivers/raw/ifpga/meson.build | 2 +- drivers/raw/meson.build | 1 - drivers/regex/meson.build | 1 - drivers/vdpa/meson.build | 1 - examples/bond/meson.build | 2 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/l2fwd-crypto/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vm_power_manager/meson.build | 6 +++--- lib/librte_ethdev/meson.build | 1 - lib/librte_graph/meson.build | 2 -- lib/meson.build | 3 ++- 40 files changed, 47 insertions(+), 55 deletions(-) diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 18ab6a8c6..178306b08 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -7,8 +7,8 @@ sources = files('main.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') - deps += ['pmd_bbdev_fpga_lte_fec'] + deps += ['baseband_fpga_lte_fec'] endif if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') - deps += ['pmd_bbdev_fpga_5gnr_fec'] + deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index 4bd71510d..e6ddda6f0 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -13,5 +13,5 @@ sources = files('cperf_ops.c', 'main.c') deps += ['cryptodev', 'net', 'security'] if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 0d9e45049..2e8b9f8a9 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') deps += 'latencystats' endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - deps += 'pmd_bond' + deps += 'net_bond' endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += 'pmd_bnxt' + deps += 'net_bnxt' endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += 'pmd_i40e' + deps += 'net_i40e' endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') - deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa'] + deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif if dpdk_conf.has('RTE_LIBRTE_BPF') sources += files('bpf_cmd.c') diff --git a/app/test/meson.build b/app/test/meson.build index fc90a1909..c5ce1d2c0 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -345,7 +345,7 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') test_deps += 'mempool_stack' endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') - test_deps += 'pmd_skeleton_event' + test_deps += 'event_skeleton' endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] @@ -355,7 +355,7 @@ endif # The following linkages of drivers are required because # they are used via a driver-specific API. if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - test_deps += 'pmd_bond' + test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] if dpdk_conf.has('RTE_LIBRTE_RING_PMD') @@ -364,7 +364,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') endif endif if dpdk_conf.has('RTE_LIBRTE_RING_PMD') - test_deps += 'pmd_ring' + test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' test_sources += 'test_event_eth_tx_adapter.c' @@ -415,7 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' - test_deps += 'pmd_crypto_scheduler' + test_deps += 'crypto_scheduler' endif foreach d:test_deps diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 584e72087..69e3ef91c 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,6 +11,14 @@ here. Deprecation Notices ------------------- +* build: The macros defined to indicate which DPDK libraries and drivers + are included in the meson build are changing to a standardized format of + ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the + upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the + upper-case name of the device class to which a driver belongs e.g. + ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be + removed in a future release. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build index 415b6724b..7e1b64ffd 100644 --- a/drivers/baseband/meson.build +++ b/drivers/baseband/meson.build @@ -8,4 +8,3 @@ endif drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec'] config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' -driver_name_fmt = 'rte_pmd_bbdev_@0@' diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build index 80de2d91d..bd73efd18 100644 --- a/drivers/bus/meson.build +++ b/drivers/bus/meson.build @@ -4,4 +4,3 @@ drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' -driver_name_fmt = 'rte_bus_@0@' diff --git a/drivers/common/meson.build b/drivers/common/meson.build index abb4f1529..d78882f05 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -8,4 +8,3 @@ endif std_deps = ['eal'] drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/mlx5/meson.build b/drivers/common/mlx5/meson.build index 8e5608703..3dacc6f68 100644 --- a/drivers/common/mlx5/meson.build +++ b/drivers/common/mlx5/meson.build @@ -8,7 +8,6 @@ if not is_linux endif config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mlx5_devx_cmds.c', diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 3409162d0..fdf8b84f8 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -2,7 +2,6 @@ # Copyright(c) 2017-2018 Intel Corporation config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' qat_crypto = true qat_crypto_path = 'crypto/qat' diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index 3a4723c0c..33f5e33dd 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/compress/octeontx/meson.build b/drivers/compress/octeontx/meson.build index 0dc98b762..2d71b4da2 100644 --- a/drivers/compress/octeontx/meson.build +++ b/drivers/compress/octeontx/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cavium, Inc -name = 'octeontx_compress' +fmt_name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index bd7a940e6..fa5c7ef3a 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,4 +26,3 @@ drivers = ['aesni_gcm', std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/null/meson.build b/drivers/crypto/null/meson.build index 502336da2..421414916 100644 --- a/drivers/crypto/null/meson.build +++ b/drivers/crypto/null/meson.build @@ -2,5 +2,5 @@ # Copyright(c) 2017 Intel Corporation deps += 'bus_vdev' -name = 'null_crypto' +fmt_name = 'null_crypto' sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c') diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build index cf031b006..d6939720d 100644 --- a/drivers/crypto/octeontx/meson.build +++ b/drivers/crypto/octeontx/meson.build @@ -7,7 +7,7 @@ endif deps += ['bus_pci'] deps += ['common_cpt'] -name = 'octeontx_crypto' +fmt_name = 'octeontx_crypto' sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build index 148ec184a..bf502e247 100644 --- a/drivers/crypto/octeontx2/meson.build +++ b/drivers/crypto/octeontx2/meson.build @@ -11,7 +11,7 @@ deps += ['common_cpt'] deps += ['common_octeontx2'] deps += ['ethdev'] deps += ['security'] -name = 'octeontx2_crypto' +fmt_name = 'octeontx2_crypto' sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', diff --git a/drivers/crypto/scheduler/meson.build b/drivers/crypto/scheduler/meson.build index c5ba2d680..2209c5023 100644 --- a/drivers/crypto/scheduler/meson.build +++ b/drivers/crypto/scheduler/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Luca Boccassi <bluca@debian.org> deps += ['bus_vdev', 'reorder'] -name = 'crypto_scheduler' +fmt_name = 'crypto_scheduler' sources = files( 'rte_cryptodev_scheduler.c', 'scheduler_failover.c', diff --git a/drivers/crypto/virtio/meson.build b/drivers/crypto/virtio/meson.build index b15b3f9fa..6cea782de 100644 --- a/drivers/crypto/virtio/meson.build +++ b/drivers/crypto/virtio/meson.build @@ -3,6 +3,6 @@ includes += include_directories('../../../lib/librte_vhost') deps += 'bus_pci' -name = 'virtio_crypto' +fmt_name = 'virtio_crypto' sources = files('virtio_cryptodev.c', 'virtio_pci.c', 'virtio_rxtx.c', 'virtqueue.c') diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build index 2f761f8e5..9abb75e3e 100644 --- a/drivers/event/dpaa/meson.build +++ b/drivers/event/dpaa/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['pmd_dpaa', 'pmd_dpaa_sec'] +deps += ['net_dpaa', 'crypto_dpaa_sec'] sources = files('dpaa_eventdev.c') includes += include_directories('../../crypto/dpaa_sec/') diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build index 71c8be3d6..4ead7bb3e 100644 --- a/drivers/event/dpaa2/meson.build +++ b/drivers/event/dpaa2/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec'] +deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec'] sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') diff --git a/drivers/event/meson.build b/drivers/event/meson.build index f2a343147..a7dac99de 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and endif std_deps = ['eventdev', 'kvargs'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' -driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/event/octeontx/meson.build b/drivers/event/octeontx/meson.build index 2b74bb62d..41e367684 100644 --- a/drivers/event/octeontx/meson.build +++ b/drivers/event/octeontx/meson.build @@ -10,4 +10,4 @@ sources = files('ssovf_worker.c', 'timvf_probe.c' ) -deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx'] +deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx'] diff --git a/drivers/event/octeontx2/meson.build b/drivers/event/octeontx2/meson.build index 0ade51cec..3e5eb37d2 100644 --- a/drivers/event/octeontx2/meson.build +++ b/drivers/event/octeontx2/meson.build @@ -24,6 +24,6 @@ foreach flag: extra_flags endif endforeach -deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2'] +deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2'] includes += include_directories('../../crypto/octeontx2') diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build index 7520e489f..a6ddd35b2 100644 --- a/drivers/mempool/meson.build +++ b/drivers/mempool/meson.build @@ -4,4 +4,3 @@ drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack'] std_deps = ['mempool'] config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' -driver_name_fmt = 'rte_mempool_@0@' diff --git a/drivers/meson.build b/drivers/meson.build index 3d4bbff13..a5a6fed06 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -33,9 +33,6 @@ foreach subpath:subdirs drivers = [] std_deps = [] config_flag_fmt = '' # format string used to set the value in dpdk_conf - driver_name_fmt = '' # format string for driver name, used to name - # the library, the dependency and to find the - # version file for linking # subpath can be either "class" or "class/driver" if subpath.contains('/') @@ -113,11 +110,14 @@ foreach subpath:subdirs endif else enabled_drivers += name + lib_name = '_'.join(['rte', class, name]) + dpdk_conf.set(lib_name.to_upper(), 1) if fmt_name == '' fmt_name = name endif - dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + + dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro # for driver compatibility, since we changed the # default to match that of make. Remove in future release # after following deprecation process @@ -133,7 +133,6 @@ foreach subpath:subdirs dpdk_conf.set(alt_flag_fmt.format( fmt_name.to_upper()), 1) endif - lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs diff --git a/drivers/net/meson.build b/drivers/net/meson.build index d56b24051..4e4c2c976 100644 --- a/drivers/net/meson.build +++ b/drivers/net/meson.build @@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std std_deps += ['bus_vdev'] # same with vdev bus config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/net/mlx4/meson.build b/drivers/net/mlx4/meson.build index 5a25e11a7..404006515 100644 --- a/drivers/net/mlx4/meson.build +++ b/drivers/net/mlx4/meson.build @@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config) # Build Glue Library if dlopen_ibverbs dlopen_name = 'mlx4_glue' - dlopen_lib_name = driver_name_fmt.format(dlopen_name) + dlopen_lib_name = 'rte_net_' + dlopen_name dlopen_so_version = LIB_GLUE_VERSION dlopen_sources = files('mlx4_glue.c') dlopen_install_dir = [ eal_pmd_path + '-glue' ] diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build index da454b194..027ff8056 100644 --- a/drivers/raw/ifpga/meson.build +++ b/drivers/raw/ifpga/meson.build @@ -11,7 +11,7 @@ subdir('base') objs = [base_objs] deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs', - 'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke'] + 'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke'] sources = files('ifpga_rawdev.c') diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build index 2c1e65ec7..d8d6cf582 100644 --- a/drivers/raw/meson.build +++ b/drivers/raw/meson.build @@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma', 'skeleton'] std_deps = ['rawdev'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' -driver_name_fmt = 'rte_rawdev_@0@' diff --git a/drivers/regex/meson.build b/drivers/regex/meson.build index 79bb5d5df..880a1b4a3 100644 --- a/drivers/regex/meson.build +++ b/drivers/regex/meson.build @@ -4,4 +4,3 @@ drivers = ['mlx5', 'octeontx2'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/vdpa/meson.build b/drivers/vdpa/meson.build index 798eb3830..b346e4308 100644 --- a/drivers/vdpa/meson.build +++ b/drivers/vdpa/meson.build @@ -10,4 +10,3 @@ drivers = ['ifc', std_deps = ['bus_pci', 'kvargs'] std_deps += ['vhost'] config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/examples/bond/meson.build b/examples/bond/meson.build index 82e355a49..69382ffcd 100644 --- a/examples/bond/meson.build +++ b/examples/bond/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -deps += 'pmd_bond' +deps += 'net_bond' allow_experimental_apis = true sources = files( 'main.c' diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index bc7a35514..fdfdd1971 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif allow_experimental_apis = true diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f72cf70e7..f1a045a0a 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -9,7 +9,7 @@ allow_experimental_apis = true build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') -deps += ['rawdev_ioat'] +deps += ['raw_ioat'] sources = files( 'ioatfwd.c' diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 39e1604fa..9002d62a6 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -8,7 +8,7 @@ deps += 'cryptodev' if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif allow_experimental_apis = true sources = files( diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index 45a59350c..bac6e5cd2 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -16,5 +16,5 @@ sources = files( 'ntb_fwd.c' ) if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') - deps += 'rawdev_ntb' + deps += 'raw_ntb' endif diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 54e2b584f..2dd132015 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -14,15 +14,15 @@ endif deps += ['power'] if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += ['pmd_bnxt'] + deps += ['net_bnxt'] endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += ['pmd_i40e'] + deps += ['net_i40e'] endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += ['pmd_ixgbe'] + deps += ['net_ixgbe'] endif allow_experimental_apis = true diff --git a/lib/librte_ethdev/meson.build b/lib/librte_ethdev/meson.build index 8fc24e8c8..e4b610246 100644 --- a/lib/librte_ethdev/meson.build +++ b/lib/librte_ethdev/meson.build @@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -name = 'ethdev' sources = files('ethdev_private.c', 'ethdev_profile.c', 'ethdev_trace_points.c', diff --git a/lib/librte_graph/meson.build b/lib/librte_graph/meson.build index d5de1e250..d3ec78ca6 100644 --- a/lib/librte_graph/meson.build +++ b/lib/librte_graph/meson.build @@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(C) 2020 Marvell International Ltd. -name = 'graph' - sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c') headers = files('rte_graph.h', 'rte_graph_worker.h') diff --git a/lib/meson.build b/lib/meson.build index 8761457c9..5f8177e1a 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -98,7 +98,8 @@ foreach l:libraries set_variable(name.underscorify() + '_disable_reason', reason) else enabled_libs += name - dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) + dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro + dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro install_headers(headers) libname = 'rte_' + name -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines Bruce Richardson @ 2020-10-15 10:30 ` Luca Boccassi 2020-10-15 11:18 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:30 UTC (permalink / raw) To: Bruce Richardson, dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > As discussed on the dpdk-dev mailing list[1], we can make some easy > improvements in standardizing the naming of the various components in DPDK, > and their associated feature-enabled macros. > > Following this patch, each library will have the name in format, > 'librte_<name>.so', and the macro indicating that library is enabled in the > build will have the form 'RTE_LIB_<NAME>'. > > Similarly, for libraries, the equivalent name formats and macros are: > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > device type taken from the relevant driver subdirectory name, i.e. 'net', > 'crypto' etc. > > To avoid too many changes at once for end applications, the old macro names > will still be provided in the build in this release, but will be removed > subsequently. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > --- > app/test-bbdev/meson.build | 4 ++-- > app/test-crypto-perf/meson.build | 2 +- > app/test-pmd/meson.build | 12 ++++++------ > app/test/meson.build | 8 ++++---- > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > drivers/baseband/meson.build | 1 - > drivers/bus/meson.build | 1 - > drivers/common/meson.build | 1 - > drivers/common/mlx5/meson.build | 1 - > drivers/common/qat/meson.build | 1 - > drivers/compress/meson.build | 1 - > drivers/compress/octeontx/meson.build | 2 +- > drivers/crypto/meson.build | 1 - > drivers/crypto/null/meson.build | 2 +- > drivers/crypto/octeontx/meson.build | 2 +- > drivers/crypto/octeontx2/meson.build | 2 +- > drivers/crypto/scheduler/meson.build | 2 +- > drivers/crypto/virtio/meson.build | 2 +- > drivers/event/dpaa/meson.build | 2 +- > drivers/event/dpaa2/meson.build | 2 +- > drivers/event/meson.build | 1 - > drivers/event/octeontx/meson.build | 2 +- > drivers/event/octeontx2/meson.build | 2 +- > drivers/mempool/meson.build | 1 - > drivers/meson.build | 9 ++++----- > drivers/net/meson.build | 1 - > drivers/net/mlx4/meson.build | 2 +- > drivers/raw/ifpga/meson.build | 2 +- > drivers/raw/meson.build | 1 - > drivers/regex/meson.build | 1 - > drivers/vdpa/meson.build | 1 - > examples/bond/meson.build | 2 +- > examples/ethtool/meson.build | 2 +- > examples/ioat/meson.build | 2 +- > examples/l2fwd-crypto/meson.build | 2 +- > examples/ntb/meson.build | 2 +- > examples/vm_power_manager/meson.build | 6 +++--- > lib/librte_ethdev/meson.build | 1 - > lib/librte_graph/meson.build | 2 -- > lib/meson.build | 3 ++- > 40 files changed, 47 insertions(+), 55 deletions(-) Does this change the share object file names too, or only the macros? -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-15 10:30 ` Luca Boccassi @ 2020-10-15 11:18 ` Bruce Richardson 2020-10-15 13:05 ` Luca Boccassi 0 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:18 UTC (permalink / raw) To: Luca Boccassi; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas On Thu, Oct 15, 2020 at 11:30:29AM +0100, Luca Boccassi wrote: > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > As discussed on the dpdk-dev mailing list[1], we can make some easy > > improvements in standardizing the naming of the various components in DPDK, > > and their associated feature-enabled macros. > > > > Following this patch, each library will have the name in format, > > 'librte_<name>.so', and the macro indicating that library is enabled in the > > build will have the form 'RTE_LIB_<NAME>'. > > > > Similarly, for libraries, the equivalent name formats and macros are: > > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > > device type taken from the relevant driver subdirectory name, i.e. 'net', > > 'crypto' etc. > > > > To avoid too many changes at once for end applications, the old macro names > > will still be provided in the build in this release, but will be removed > > subsequently. > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > > --- > > app/test-bbdev/meson.build | 4 ++-- > > app/test-crypto-perf/meson.build | 2 +- > > app/test-pmd/meson.build | 12 ++++++------ > > app/test/meson.build | 8 ++++---- > > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > > drivers/baseband/meson.build | 1 - > > drivers/bus/meson.build | 1 - > > drivers/common/meson.build | 1 - > > drivers/common/mlx5/meson.build | 1 - > > drivers/common/qat/meson.build | 1 - > > drivers/compress/meson.build | 1 - > > drivers/compress/octeontx/meson.build | 2 +- > > drivers/crypto/meson.build | 1 - > > drivers/crypto/null/meson.build | 2 +- > > drivers/crypto/octeontx/meson.build | 2 +- > > drivers/crypto/octeontx2/meson.build | 2 +- > > drivers/crypto/scheduler/meson.build | 2 +- > > drivers/crypto/virtio/meson.build | 2 +- > > drivers/event/dpaa/meson.build | 2 +- > > drivers/event/dpaa2/meson.build | 2 +- > > drivers/event/meson.build | 1 - > > drivers/event/octeontx/meson.build | 2 +- > > drivers/event/octeontx2/meson.build | 2 +- > > drivers/mempool/meson.build | 1 - > > drivers/meson.build | 9 ++++----- > > drivers/net/meson.build | 1 - > > drivers/net/mlx4/meson.build | 2 +- > > drivers/raw/ifpga/meson.build | 2 +- > > drivers/raw/meson.build | 1 - > > drivers/regex/meson.build | 1 - > > drivers/vdpa/meson.build | 1 - > > examples/bond/meson.build | 2 +- > > examples/ethtool/meson.build | 2 +- > > examples/ioat/meson.build | 2 +- > > examples/l2fwd-crypto/meson.build | 2 +- > > examples/ntb/meson.build | 2 +- > > examples/vm_power_manager/meson.build | 6 +++--- > > lib/librte_ethdev/meson.build | 1 - > > lib/librte_graph/meson.build | 2 -- > > lib/meson.build | 3 ++- > > 40 files changed, 47 insertions(+), 55 deletions(-) > > Does this change the share object file names too, or only the macros? > It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away. /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-15 11:18 ` Bruce Richardson @ 2020-10-15 13:05 ` Luca Boccassi 2020-10-15 14:03 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 13:05 UTC (permalink / raw) To: Bruce Richardson; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas On Thu, 2020-10-15 at 12:18 +0100, Bruce Richardson wrote: > On Thu, Oct 15, 2020 at 11:30:29AM +0100, Luca Boccassi wrote: > > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > > As discussed on the dpdk-dev mailing list[1], we can make some easy > > > improvements in standardizing the naming of the various components in DPDK, > > > and their associated feature-enabled macros. > > > > > > Following this patch, each library will have the name in format, > > > 'librte_<name>.so', and the macro indicating that library is enabled in the > > > build will have the form 'RTE_LIB_<NAME>'. > > > > > > Similarly, for libraries, the equivalent name formats and macros are: > > > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > > > device type taken from the relevant driver subdirectory name, i.e. 'net', > > > 'crypto' etc. > > > > > > To avoid too many changes at once for end applications, the old macro names > > > will still be provided in the build in this release, but will be removed > > > subsequently. > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > > > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > > > --- > > > app/test-bbdev/meson.build | 4 ++-- > > > app/test-crypto-perf/meson.build | 2 +- > > > app/test-pmd/meson.build | 12 ++++++------ > > > app/test/meson.build | 8 ++++---- > > > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > > > drivers/baseband/meson.build | 1 - > > > drivers/bus/meson.build | 1 - > > > drivers/common/meson.build | 1 - > > > drivers/common/mlx5/meson.build | 1 - > > > drivers/common/qat/meson.build | 1 - > > > drivers/compress/meson.build | 1 - > > > drivers/compress/octeontx/meson.build | 2 +- > > > drivers/crypto/meson.build | 1 - > > > drivers/crypto/null/meson.build | 2 +- > > > drivers/crypto/octeontx/meson.build | 2 +- > > > drivers/crypto/octeontx2/meson.build | 2 +- > > > drivers/crypto/scheduler/meson.build | 2 +- > > > drivers/crypto/virtio/meson.build | 2 +- > > > drivers/event/dpaa/meson.build | 2 +- > > > drivers/event/dpaa2/meson.build | 2 +- > > > drivers/event/meson.build | 1 - > > > drivers/event/octeontx/meson.build | 2 +- > > > drivers/event/octeontx2/meson.build | 2 +- > > > drivers/mempool/meson.build | 1 - > > > drivers/meson.build | 9 ++++----- > > > drivers/net/meson.build | 1 - > > > drivers/net/mlx4/meson.build | 2 +- > > > drivers/raw/ifpga/meson.build | 2 +- > > > drivers/raw/meson.build | 1 - > > > drivers/regex/meson.build | 1 - > > > drivers/vdpa/meson.build | 1 - > > > examples/bond/meson.build | 2 +- > > > examples/ethtool/meson.build | 2 +- > > > examples/ioat/meson.build | 2 +- > > > examples/l2fwd-crypto/meson.build | 2 +- > > > examples/ntb/meson.build | 2 +- > > > examples/vm_power_manager/meson.build | 6 +++--- > > > lib/librte_ethdev/meson.build | 1 - > > > lib/librte_graph/meson.build | 2 -- > > > lib/meson.build | 3 ++- > > > 40 files changed, 47 insertions(+), 55 deletions(-) > > > > Does this change the share object file names too, or only the macros? > > > > It does indeed change the object name files, which is a little bit > concerning. However, the consensus based on the RFC seemed to be that the > benefit is likely worth the change. If we want, we can look to use symlinks > to the old names on install, but I think that just delays the pain since I > would expect few to actually change their build to the new names until the > old ones and the symlinks completely go away. > > /Bruce It is a backward incompatible change, so we need to provide symlinks, right? On upgrade, programs linked to librte_old.so will fail to start. Or was this targeted at 20.11 thus piggy-backing on the ABI change which forces a re-link? -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-15 13:05 ` Luca Boccassi @ 2020-10-15 14:03 ` Bruce Richardson 2020-10-15 15:32 ` Luca Boccassi 0 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 14:03 UTC (permalink / raw) To: Luca Boccassi; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas On Thu, Oct 15, 2020 at 02:05:37PM +0100, Luca Boccassi wrote: > On Thu, 2020-10-15 at 12:18 +0100, Bruce Richardson wrote: > > On Thu, Oct 15, 2020 at 11:30:29AM +0100, Luca Boccassi wrote: > > > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > > > As discussed on the dpdk-dev mailing list[1], we can make some easy > > > > improvements in standardizing the naming of the various components in DPDK, > > > > and their associated feature-enabled macros. > > > > > > > > Following this patch, each library will have the name in format, > > > > 'librte_<name>.so', and the macro indicating that library is enabled in the > > > > build will have the form 'RTE_LIB_<NAME>'. > > > > > > > > Similarly, for libraries, the equivalent name formats and macros are: > > > > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > > > > device type taken from the relevant driver subdirectory name, i.e. 'net', > > > > 'crypto' etc. > > > > > > > > To avoid too many changes at once for end applications, the old macro names > > > > will still be provided in the build in this release, but will be removed > > > > subsequently. > > > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > > > > > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > > > > --- > > > > app/test-bbdev/meson.build | 4 ++-- > > > > app/test-crypto-perf/meson.build | 2 +- > > > > app/test-pmd/meson.build | 12 ++++++------ > > > > app/test/meson.build | 8 ++++---- > > > > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > > > > drivers/baseband/meson.build | 1 - > > > > drivers/bus/meson.build | 1 - > > > > drivers/common/meson.build | 1 - > > > > drivers/common/mlx5/meson.build | 1 - > > > > drivers/common/qat/meson.build | 1 - > > > > drivers/compress/meson.build | 1 - > > > > drivers/compress/octeontx/meson.build | 2 +- > > > > drivers/crypto/meson.build | 1 - > > > > drivers/crypto/null/meson.build | 2 +- > > > > drivers/crypto/octeontx/meson.build | 2 +- > > > > drivers/crypto/octeontx2/meson.build | 2 +- > > > > drivers/crypto/scheduler/meson.build | 2 +- > > > > drivers/crypto/virtio/meson.build | 2 +- > > > > drivers/event/dpaa/meson.build | 2 +- > > > > drivers/event/dpaa2/meson.build | 2 +- > > > > drivers/event/meson.build | 1 - > > > > drivers/event/octeontx/meson.build | 2 +- > > > > drivers/event/octeontx2/meson.build | 2 +- > > > > drivers/mempool/meson.build | 1 - > > > > drivers/meson.build | 9 ++++----- > > > > drivers/net/meson.build | 1 - > > > > drivers/net/mlx4/meson.build | 2 +- > > > > drivers/raw/ifpga/meson.build | 2 +- > > > > drivers/raw/meson.build | 1 - > > > > drivers/regex/meson.build | 1 - > > > > drivers/vdpa/meson.build | 1 - > > > > examples/bond/meson.build | 2 +- > > > > examples/ethtool/meson.build | 2 +- > > > > examples/ioat/meson.build | 2 +- > > > > examples/l2fwd-crypto/meson.build | 2 +- > > > > examples/ntb/meson.build | 2 +- > > > > examples/vm_power_manager/meson.build | 6 +++--- > > > > lib/librte_ethdev/meson.build | 1 - > > > > lib/librte_graph/meson.build | 2 -- > > > > lib/meson.build | 3 ++- > > > > 40 files changed, 47 insertions(+), 55 deletions(-) > > > > > > Does this change the share object file names too, or only the macros? > > > > > > > It does indeed change the object name files, which is a little bit > > concerning. However, the consensus based on the RFC seemed to be that the > > benefit is likely worth the change. If we want, we can look to use symlinks > > to the old names on install, but I think that just delays the pain since I > > would expect few to actually change their build to the new names until the > > old ones and the symlinks completely go away. > > > > /Bruce > > It is a backward incompatible change, so we need to provide symlinks, > right? On upgrade, programs linked to librte_old.so will fail to start. > Or was this targeted at 20.11 thus piggy-backing on the ABI change > which forces a re-link? > More of the latter, and the fact that changing the build system involved a few library renames anyway for those using make. Since the ABI is changing this release, and all the libs have a new major version number there is no requirement for libs linked against an older version to work, and since pkg-config should now be used for linking the actual names should not be a concern. That's the thinking anyway. :-) /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-15 14:03 ` Bruce Richardson @ 2020-10-15 15:32 ` Luca Boccassi 2020-10-15 15:34 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 15:32 UTC (permalink / raw) To: Bruce Richardson; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas On Thu, 2020-10-15 at 15:03 +0100, Bruce Richardson wrote: > On Thu, Oct 15, 2020 at 02:05:37PM +0100, Luca Boccassi wrote: > > On Thu, 2020-10-15 at 12:18 +0100, Bruce Richardson wrote: > > > On Thu, Oct 15, 2020 at 11:30:29AM +0100, Luca Boccassi wrote: > > > > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > > > > As discussed on the dpdk-dev mailing list[1], we can make some easy > > > > > improvements in standardizing the naming of the various components in DPDK, > > > > > and their associated feature-enabled macros. > > > > > > > > > > Following this patch, each library will have the name in format, > > > > > 'librte_<name>.so', and the macro indicating that library is enabled in the > > > > > build will have the form 'RTE_LIB_<NAME>'. > > > > > > > > > > Similarly, for libraries, the equivalent name formats and macros are: > > > > > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > > > > > device type taken from the relevant driver subdirectory name, i.e. 'net', > > > > > 'crypto' etc. > > > > > > > > > > To avoid too many changes at once for end applications, the old macro names > > > > > will still be provided in the build in this release, but will be removed > > > > > subsequently. > > > > > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > > > > > > > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > > > > > --- > > > > > app/test-bbdev/meson.build | 4 ++-- > > > > > app/test-crypto-perf/meson.build | 2 +- > > > > > app/test-pmd/meson.build | 12 ++++++------ > > > > > app/test/meson.build | 8 ++++---- > > > > > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > > > > > drivers/baseband/meson.build | 1 - > > > > > drivers/bus/meson.build | 1 - > > > > > drivers/common/meson.build | 1 - > > > > > drivers/common/mlx5/meson.build | 1 - > > > > > drivers/common/qat/meson.build | 1 - > > > > > drivers/compress/meson.build | 1 - > > > > > drivers/compress/octeontx/meson.build | 2 +- > > > > > drivers/crypto/meson.build | 1 - > > > > > drivers/crypto/null/meson.build | 2 +- > > > > > drivers/crypto/octeontx/meson.build | 2 +- > > > > > drivers/crypto/octeontx2/meson.build | 2 +- > > > > > drivers/crypto/scheduler/meson.build | 2 +- > > > > > drivers/crypto/virtio/meson.build | 2 +- > > > > > drivers/event/dpaa/meson.build | 2 +- > > > > > drivers/event/dpaa2/meson.build | 2 +- > > > > > drivers/event/meson.build | 1 - > > > > > drivers/event/octeontx/meson.build | 2 +- > > > > > drivers/event/octeontx2/meson.build | 2 +- > > > > > drivers/mempool/meson.build | 1 - > > > > > drivers/meson.build | 9 ++++----- > > > > > drivers/net/meson.build | 1 - > > > > > drivers/net/mlx4/meson.build | 2 +- > > > > > drivers/raw/ifpga/meson.build | 2 +- > > > > > drivers/raw/meson.build | 1 - > > > > > drivers/regex/meson.build | 1 - > > > > > drivers/vdpa/meson.build | 1 - > > > > > examples/bond/meson.build | 2 +- > > > > > examples/ethtool/meson.build | 2 +- > > > > > examples/ioat/meson.build | 2 +- > > > > > examples/l2fwd-crypto/meson.build | 2 +- > > > > > examples/ntb/meson.build | 2 +- > > > > > examples/vm_power_manager/meson.build | 6 +++--- > > > > > lib/librte_ethdev/meson.build | 1 - > > > > > lib/librte_graph/meson.build | 2 -- > > > > > lib/meson.build | 3 ++- > > > > > 40 files changed, 47 insertions(+), 55 deletions(-) > > > > > > > > Does this change the share object file names too, or only the macros? > > > > > > > > > > It does indeed change the object name files, which is a little bit > > > concerning. However, the consensus based on the RFC seemed to be that the > > > benefit is likely worth the change. If we want, we can look to use symlinks > > > to the old names on install, but I think that just delays the pain since I > > > would expect few to actually change their build to the new names until the > > > old ones and the symlinks completely go away. > > > > > > /Bruce > > > > It is a backward incompatible change, so we need to provide symlinks, > > right? On upgrade, programs linked to librte_old.so will fail to start. > > Or was this targeted at 20.11 thus piggy-backing on the ABI change > > which forces a re-link? > > > More of the latter, and the fact that changing the build system involved a > few library renames anyway for those using make. Since the ABI is changing > this release, and all the libs have a new major version number there is no > requirement for libs linked against an older version to work, and since > pkg-config should now be used for linking the actual names should not be > a concern. > > That's the thinking anyway. :-) > > /Bruce Ok that makes sense, I wasn't sure if this series was targeted for 20.11 or for later. In that case, Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines 2020-10-15 15:32 ` Luca Boccassi @ 2020-10-15 15:34 ` Bruce Richardson 0 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:34 UTC (permalink / raw) To: Luca Boccassi; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, thomas On Thu, Oct 15, 2020 at 04:32:35PM +0100, Luca Boccassi wrote: > On Thu, 2020-10-15 at 15:03 +0100, Bruce Richardson wrote: > > On Thu, Oct 15, 2020 at 02:05:37PM +0100, Luca Boccassi wrote: > > > On Thu, 2020-10-15 at 12:18 +0100, Bruce Richardson wrote: > > > > On Thu, Oct 15, 2020 at 11:30:29AM +0100, Luca Boccassi wrote: > > > > > On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > > > > > > As discussed on the dpdk-dev mailing list[1], we can make some easy > > > > > > improvements in standardizing the naming of the various components in DPDK, > > > > > > and their associated feature-enabled macros. > > > > > > > > > > > > Following this patch, each library will have the name in format, > > > > > > 'librte_<name>.so', and the macro indicating that library is enabled in the > > > > > > build will have the form 'RTE_LIB_<NAME>'. > > > > > > > > > > > > Similarly, for libraries, the equivalent name formats and macros are: > > > > > > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > > > > > > device type taken from the relevant driver subdirectory name, i.e. 'net', > > > > > > 'crypto' etc. > > > > > > > > > > > > To avoid too many changes at once for end applications, the old macro names > > > > > > will still be provided in the build in this release, but will be removed > > > > > > subsequently. > > > > > > > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > > > > > > > > > > [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u > > > > > > --- > > > > > > app/test-bbdev/meson.build | 4 ++-- > > > > > > app/test-crypto-perf/meson.build | 2 +- > > > > > > app/test-pmd/meson.build | 12 ++++++------ > > > > > > app/test/meson.build | 8 ++++---- > > > > > > doc/guides/rel_notes/deprecation.rst | 8 ++++++++ > > > > > > drivers/baseband/meson.build | 1 - > > > > > > drivers/bus/meson.build | 1 - > > > > > > drivers/common/meson.build | 1 - > > > > > > drivers/common/mlx5/meson.build | 1 - > > > > > > drivers/common/qat/meson.build | 1 - > > > > > > drivers/compress/meson.build | 1 - > > > > > > drivers/compress/octeontx/meson.build | 2 +- > > > > > > drivers/crypto/meson.build | 1 - > > > > > > drivers/crypto/null/meson.build | 2 +- > > > > > > drivers/crypto/octeontx/meson.build | 2 +- > > > > > > drivers/crypto/octeontx2/meson.build | 2 +- > > > > > > drivers/crypto/scheduler/meson.build | 2 +- > > > > > > drivers/crypto/virtio/meson.build | 2 +- > > > > > > drivers/event/dpaa/meson.build | 2 +- > > > > > > drivers/event/dpaa2/meson.build | 2 +- > > > > > > drivers/event/meson.build | 1 - > > > > > > drivers/event/octeontx/meson.build | 2 +- > > > > > > drivers/event/octeontx2/meson.build | 2 +- > > > > > > drivers/mempool/meson.build | 1 - > > > > > > drivers/meson.build | 9 ++++----- > > > > > > drivers/net/meson.build | 1 - > > > > > > drivers/net/mlx4/meson.build | 2 +- > > > > > > drivers/raw/ifpga/meson.build | 2 +- > > > > > > drivers/raw/meson.build | 1 - > > > > > > drivers/regex/meson.build | 1 - > > > > > > drivers/vdpa/meson.build | 1 - > > > > > > examples/bond/meson.build | 2 +- > > > > > > examples/ethtool/meson.build | 2 +- > > > > > > examples/ioat/meson.build | 2 +- > > > > > > examples/l2fwd-crypto/meson.build | 2 +- > > > > > > examples/ntb/meson.build | 2 +- > > > > > > examples/vm_power_manager/meson.build | 6 +++--- > > > > > > lib/librte_ethdev/meson.build | 1 - > > > > > > lib/librte_graph/meson.build | 2 -- > > > > > > lib/meson.build | 3 ++- > > > > > > 40 files changed, 47 insertions(+), 55 deletions(-) > > > > > > > > > > Does this change the share object file names too, or only the macros? > > > > > > > > > > > > > It does indeed change the object name files, which is a little bit > > > > concerning. However, the consensus based on the RFC seemed to be that the > > > > benefit is likely worth the change. If we want, we can look to use symlinks > > > > to the old names on install, but I think that just delays the pain since I > > > > would expect few to actually change their build to the new names until the > > > > old ones and the symlinks completely go away. > > > > > > > > /Bruce > > > > > > It is a backward incompatible change, so we need to provide symlinks, > > > right? On upgrade, programs linked to librte_old.so will fail to start. > > > Or was this targeted at 20.11 thus piggy-backing on the ABI change > > > which forces a re-link? > > > > > More of the latter, and the fact that changing the build system involved a > > few library renames anyway for those using make. Since the ABI is changing > > this release, and all the libs have a new major version number there is no > > requirement for libs linked against an older version to work, and since > > pkg-config should now be used for linking the actual names should not be > > a concern. > > > > That's the thinking anyway. :-) > > > > /Bruce > > Ok that makes sense, I wasn't sure if this series was targeted for > 20.11 or for later. In that case, > > Acked-by: Luca Boccassi <bluca@debian.org> > Yes, if it doesn't make 20.11 we'll have to re-evaluate and be stricter with the compatibility constraints. It might not be worth doing post-20.11. ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson ` (5 preceding siblings ...) 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines Bruce Richardson @ 2020-10-14 14:13 ` Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 6 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-14 14:13 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 4 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 2 +- app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 22 +- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 22 +- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- drivers/net/kni/meson.build | 2 +- drivers/net/netvsc/meson.build | 2 +- drivers/net/vhost/meson.build | 2 +- drivers/raw/dpaa2_cmdif/meson.build | 2 +- drivers/raw/dpaa2_qdma/meson.build | 2 +- drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/vdpa/ifc/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 2 +- examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 8 +- lib/librte_eal/linux/eal.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- lib/librte_port/meson.build | 2 +- lib/meson.build | 2 +- 85 files changed, 389 insertions(+), 389 deletions(-) diff --git a/app/proc-info/main.c b/app/proc-info/main.c index b0de39489..353b3921c 100644 --- a/app/proc-info/main.c +++ b/app/proc-info/main.c @@ -30,7 +30,7 @@ #include <rte_string_fns.h> #include <rte_metrics.h> #include <rte_cycles.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif #include <rte_cryptodev.h> @@ -739,7 +739,7 @@ show_port(void) } printf(" - cyrpto context\n"); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY void *p_ctx = rte_eth_dev_get_sec_ctx(i); printf("\t -- security context - %p\n", p_ctx); diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 178306b08..a2bd7dca6 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -6,9 +6,9 @@ sources = files('main.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_LTE_FEC') deps += ['baseband_fpga_lte_fec'] endif -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_5GNR_FEC') deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c index 45c0d62ac..2e85eccf9 100644 --- a/app/test-bbdev/test_bbdev_perf.c +++ b/app/test-bbdev/test_bbdev_perf.c @@ -26,7 +26,7 @@ #define MAX_QUEUES RTE_MAX_LCORE #define TEST_REPETITIONS 1000 -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC #include <fpga_lte_fec.h> #define FPGA_LTE_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf") #define FPGA_LTE_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf") @@ -39,7 +39,7 @@ #define FLR_4G_TIMEOUT 610 #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC #include <rte_pmd_fpga_5gnr_fec.h> #define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf") #define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf") @@ -565,7 +565,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, /* Configure fpga lte fec with PF & VF values * if '-i' flag is set and using fpga device */ -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_LTE_PF_DRIVER_NAME))) { struct fpga_lte_fec_conf conf; @@ -609,7 +609,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, info->dev_name); } #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) { struct fpga_5gnr_fec_conf conf; diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c index 3da835a9c..cc45af7f2 100644 --- a/app/test-crypto-perf/cperf_ops.c +++ b/app/test-crypto-perf/cperf_ops.c @@ -8,7 +8,7 @@ #include "cperf_ops.h" #include "cperf_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int cperf_set_ops_security(struct rte_crypto_op **ops, uint32_t src_buf_offset __rte_unused, @@ -551,7 +551,7 @@ cperf_create_session(struct rte_mempool *sess_mp, struct rte_crypto_sym_xform aead_xform; struct rte_cryptodev_sym_session *sess = NULL; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * security only */ @@ -844,7 +844,7 @@ cperf_get_op_functions(const struct cperf_options *options, op_fns->populate_ops = cperf_set_ops_cipher; return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_PDCP) { op_fns->populate_ops = cperf_set_ops_security; return 0; diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-perf/cperf_options.h index 256fabb07..9664a4b34 100644 --- a/app/test-crypto-perf/cperf_options.h +++ b/app/test-crypto-perf/cperf_options.h @@ -7,7 +7,7 @@ #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -47,7 +47,7 @@ #define CPERF_DIGEST_SZ ("digest-sz") -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define CPERF_PDCP_SN_SZ ("pdcp-sn-sz") #define CPERF_PDCP_DOMAIN ("pdcp-domain") #define CPERF_PDCP_SES_HFN_EN ("pdcp-ses-hfn-en") @@ -123,7 +123,7 @@ struct cperf_options { uint16_t digest_sz; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint16_t pdcp_sn_sz; uint16_t pdcp_ses_hfn_en; enum rte_security_pdcp_domain pdcp_domain; diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c index 8e086f88e..03ed6f594 100644 --- a/app/test-crypto-perf/cperf_options_parsing.c +++ b/app/test-crypto-perf/cperf_options_parsing.c @@ -57,7 +57,7 @@ usage(char *progname) " --pmd-cyclecount-delay-ms N: set delay between enqueue\n" " and dequeue in pmd-cyclecount benchmarking mode\n" " --csv-friendly: enable test result output CSV friendly\n" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY " --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n" " --pdcp-domain DOMAIN: set PDCP domain <control/user>\n" " --pdcp-ses-hfn-en: enable session based fixed HFN\n" @@ -631,7 +631,7 @@ parse_digest_sz(struct cperf_options *opts, const char *arg) return parse_uint16_t(&opts->digest_sz, arg); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int parse_pdcp_sn_sz(struct cperf_options *opts, const char *arg) { @@ -841,7 +841,7 @@ static struct option lgopts[] = { { CPERF_DIGEST_SZ, required_argument, 0, 0 }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, required_argument, 0, 0 }, { CPERF_PDCP_DOMAIN, required_argument, 0, 0 }, { CPERF_PDCP_SES_HFN_EN, no_argument, 0, 0 }, @@ -913,7 +913,7 @@ cperf_options_default(struct cperf_options *opts) opts->digest_sz = 12; opts->pmdcc_delay = 0; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY opts->pdcp_sn_sz = 12; opts->pdcp_domain = RTE_SECURITY_PDCP_MODE_CONTROL; opts->pdcp_ses_hfn_en = 0; @@ -954,7 +954,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts) { CPERF_AEAD_IV_SZ, parse_aead_iv_sz }, { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz }, { CPERF_DIGEST_SZ, parse_digest_sz }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, parse_pdcp_sn_sz }, { CPERF_PDCP_DOMAIN, parse_pdcp_domain }, { CPERF_PDCP_SES_HFN_EN, parse_pdcp_ses_hfn_en }, @@ -1061,7 +1061,7 @@ check_cipher_buffer_length(struct cperf_options *options) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int check_docsis_buffer_length(struct cperf_options *options) { @@ -1215,7 +1215,7 @@ cperf_options_check(struct cperf_options *options) return -EINVAL; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_DOCSIS) { if (check_docsis_buffer_length(options) < 0) return -EINVAL; @@ -1308,7 +1308,7 @@ cperf_options_dump(struct cperf_options *opts) printf("#\n"); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (opts->op_type == CPERF_DOCSIS) { printf("# docsis header size: %u\n", opts->docsis_hdr_sz); printf("#\n"); diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c index 69f0943d1..4e67d3aeb 100644 --- a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c @@ -63,7 +63,7 @@ cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-perf/cperf_test_throughput.c index 12d9ea4f9..f30f7d5c2 100644 --- a/app/test-crypto-perf/cperf_test_throughput.c +++ b/app/test-crypto-perf/cperf_test_throughput.c @@ -35,7 +35,7 @@ cperf_throughput_test_free(struct cperf_throughput_ctx *ctx) if (!ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/main.c b/app/test-crypto-perf/main.c index 8f8e580e4..f4f7e31c9 100644 --- a/app/test-crypto-perf/main.c +++ b/app/test-crypto-perf/main.c @@ -9,7 +9,7 @@ #include <rte_random.h> #include <rte_eal.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -170,7 +170,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) for (i = 0; i < enabled_cdev_count && i < RTE_CRYPTO_MAX_DEVS; i++) { cdev_id = enabled_cdevs[i]; -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* * If multi-core scheduler is used, limit the number * of queue pairs to 1, as there is no way to know @@ -238,7 +238,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) */ if (!strcmp((const char *)opts->device_type, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index e6ddda6f0..558c64878 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,6 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif diff --git a/app/test-pipeline/main.c b/app/test-pipeline/main.c index 7f0d6d3f1..c7be5942f 100644 --- a/app/test-pipeline/main.c +++ b/app/test-pipeline/main.c @@ -126,7 +126,7 @@ app_lcore_main_loop(__rte_unused void *arg) return 0; case e_APP_PIPELINE_ACL: -#ifndef RTE_LIBRTE_ACL +#ifndef RTE_LIB_ACL rte_exit(EXIT_FAILURE, "ACL not present in build\n"); #else app_main_loop_worker_pipeline_acl(); diff --git a/app/test-pmd/bpf_cmd.h b/app/test-pmd/bpf_cmd.h index 5ee4c9f79..66bc70635 100644 --- a/app/test-pmd/bpf_cmd.h +++ b/app/test-pmd/bpf_cmd.h @@ -5,12 +5,12 @@ #ifndef _BPF_CMD_H_ #define _BPF_CMD_H_ -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF /* BPF CLI */ extern cmdline_parse_inst_t cmd_operate_bpf_ld_parse; extern cmdline_parse_inst_t cmd_operate_bpf_unld_parse; -#endif /* RTE_LIBRTE_BPF */ +#endif /* RTE_LIB_BPF */ #endif /* _BPF_CMD_H_ */ diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 273fb1af6..7a35a826d 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -50,20 +50,20 @@ #include <cmdline_parse_etheraddr.h> #include <cmdline_socket.h> #include <cmdline.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #include <rte_eth_bond_8023ad.h> #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA #include <rte_pmd_dpaa.h> #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include "testpmd.h" @@ -612,7 +612,7 @@ static void cmd_help_long_parsed(void *parsed_result, " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -5457,7 +5457,7 @@ cmd_set_bypass_mode_parsed(void *parsed_result, portid_t port_id = res->port_id; int32_t rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->value, "bypass")) @@ -5525,7 +5525,7 @@ cmd_set_bypass_event_parsed(void *parsed_result, struct cmd_set_bypass_event_result *res = parsed_result; portid_t port_id = res->port_id; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; @@ -5630,7 +5630,7 @@ cmd_set_bypass_timeout_parsed(void *parsed_result, { __rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS if (!strcmp(res->value, "1.5")) bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC; else if (!strcmp(res->value, "2")) @@ -5693,7 +5693,7 @@ cmd_show_bypass_config_parsed(void *parsed_result, struct cmd_show_bypass_config_result *res = parsed_result; portid_t port_id = res->port_id; int rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t event_mode; uint32_t bypass_mode; uint32_t timeout = bypass_timeout; @@ -5776,7 +5776,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = { }, }; -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND /* *** SET BONDING MODE *** */ struct cmd_set_bonding_mode_result { cmdline_fixed_string_t set; @@ -6546,7 +6546,7 @@ cmdline_parse_inst_t cmd_set_bonding_agg_mode_policy = { }; -#endif /* RTE_LIBRTE_PMD_BOND */ +#endif /* RTE_NET_BOND */ /* *** SET FORWARDING MODE *** */ struct cmd_set_fwd_mode_result { @@ -8831,12 +8831,12 @@ cmd_set_vf_rxmode_parsed(void *parsed_result, RTE_SET_USED(is_on); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); @@ -8910,12 +8910,12 @@ static void cmd_vf_mac_addr_parsed(void *parsed_result, if (strcmp(res->what, "add") != 0) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_add_vf_mac_addr(res->port_num, res->vf_num, &res->address); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_mac_addr_add(res->port_num, &res->address, res->vf_num); @@ -8986,17 +8986,17 @@ cmd_vf_rx_vlan_filter_parsed(void *parsed_result, __rte_unused int is_add = (strcmp(res->what, "add") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); @@ -9523,7 +9523,7 @@ cmd_global_config_parsed(void *parsed_result, conf.cfg.gre_key_len = res->len; ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE, RTE_ETH_FILTER_SET, &conf); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_gre_key_len(res->port_id, res->len); #endif @@ -10087,7 +10087,7 @@ cmd_queue_region_parsed(void *parsed_result, { struct cmd_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10095,7 +10095,7 @@ cmd_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_SET; region_conf.region_id = res->region_id; @@ -10186,7 +10186,7 @@ cmd_region_flowtype_parsed(void *parsed_result, { struct cmd_region_flowtype_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10194,7 +10194,7 @@ cmd_region_flowtype_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET; @@ -10277,7 +10277,7 @@ cmd_user_priority_region_parsed(void *parsed_result, { struct cmd_user_priority_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10285,7 +10285,7 @@ cmd_user_priority_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET; region_conf.user_priority = res->user_priority_id; @@ -10368,7 +10368,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, { struct cmd_flush_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10376,7 +10376,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); if (strcmp(res->what, "on") == 0) @@ -10450,7 +10450,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, { struct cmd_show_queue_region_info *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_regions rte_pmd_regions; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10458,7 +10458,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(&rte_pmd_regions, 0, sizeof(rte_pmd_regions)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET; @@ -11354,7 +11354,7 @@ cmd_flow_director_filter_parsed(void *parsed_result, } } else { if (!strcmp(res->mode_value, "raw")) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; struct rte_pmd_i40e_pkt_template_conf conf; @@ -13712,17 +13712,17 @@ cmd_set_vf_vlan_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13818,17 +13818,17 @@ cmd_set_vf_mac_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13924,17 +13924,17 @@ cmd_set_vf_vlan_stripq_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); @@ -14028,17 +14028,17 @@ cmd_set_vf_vlan_insert_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); @@ -14124,19 +14124,19 @@ cmd_set_tx_loopback_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_tx_loopback(res->port_id, is_on); #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA if (ret == -ENOTSUP) ret = rte_pmd_dpaa_set_tx_loopback(res->port_id, is_on); #endif @@ -14223,11 +14223,11 @@ cmd_set_all_queues_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_all_queues_drop_en(res->port_id, is_on); #endif @@ -14319,7 +14319,7 @@ cmd_set_vf_split_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_split_drop_en(res->port_id, res->vf_id, is_on); #endif @@ -14411,17 +14411,17 @@ cmd_set_vf_mac_addr_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); @@ -14538,7 +14538,7 @@ cmd_set_macsec_offload_on_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp); #endif } @@ -14635,7 +14635,7 @@ cmd_set_macsec_offload_off_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_disable(port_id); #endif } @@ -14721,7 +14721,7 @@ cmd_set_macsec_sc_parsed( int ret = -ENOTSUP; int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_config_txsc(res->port_id, res->mac.addr_bytes) : @@ -14840,7 +14840,7 @@ cmd_set_macsec_sa_parsed( key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1); } -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_select_txsa(res->port_id, res->idx, res->an, res->pn, key) : @@ -14937,7 +14937,7 @@ cmd_set_vf_promisc_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_unicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15027,7 +15027,7 @@ cmd_set_vf_allmulti_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_multicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15117,7 +15117,7 @@ cmd_set_vf_broadcast_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_broadcast(res->port_id, res->vf_id, is_on); #endif @@ -15211,7 +15211,7 @@ cmd_set_vf_vlan_tag_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_vlan_tag(res->port_id, res->vf_id, is_on); #endif @@ -15332,7 +15332,7 @@ cmd_vf_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_max_bw(res->port_id, res->vf_id, res->bw); #endif @@ -15432,7 +15432,7 @@ cmd_vf_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_bw_alloc(res->port_id, res->vf_id, tc_num, bw); #endif @@ -15498,7 +15498,7 @@ cmd_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_tc_bw_alloc(res->port_id, tc_num, bw); #endif @@ -15547,7 +15547,7 @@ cmd_vf_tc_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_max_bw(res->port_id, res->vf_id, res->tc_no, res->bw); #endif @@ -16601,7 +16601,7 @@ cmd_strict_link_prio_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_tc_strict_prio(res->port_id, res->tc_map); #endif @@ -16685,7 +16685,7 @@ cmd_ddp_add_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16753,7 +16753,7 @@ cmd_ddp_del_parsed( if (!buff) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16808,7 +16808,7 @@ cmd_ddp_info_parsed( uint8_t *pkg; uint32_t pkg_size; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint32_t i, j, n; uint8_t *buff; uint32_t buff_size = 0; @@ -16829,7 +16829,7 @@ cmd_ddp_info_parsed( if (!pkg) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size, (uint8_t *)&info, sizeof(info), RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER); @@ -17044,7 +17044,7 @@ cmd_ddp_get_list_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_ddp_get_list_result *res = parsed_result; struct rte_pmd_i40e_profile_list *p_list; struct rte_pmd_i40e_profile_info *p_info; @@ -17054,7 +17054,7 @@ cmd_ddp_get_list_parsed( #endif int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E size = PROFILE_INFO_SIZE * MAX_PROFILE_NUM + 4; p_list = (struct rte_pmd_i40e_profile_list *)malloc(size); if (!p_list) { @@ -17122,7 +17122,7 @@ cmd_cfg_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_cfg_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17134,7 +17134,7 @@ cmd_cfg_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17245,7 +17245,7 @@ cmd_clear_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_clear_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17257,7 +17257,7 @@ cmd_clear_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17373,13 +17373,13 @@ cmd_show_vf_stats_parsed( memset(&stats, 0, sizeof(stats)); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_get_vf_stats(res->port_id, res->vf_id, &stats); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_get_vf_stats(res->port_id, res->vf_id, @@ -17478,12 +17478,12 @@ cmd_clear_vf_stats_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_reset_vf_stats(res->port_id, res->vf_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_reset_vf_stats(res->port_id, res->vf_id); @@ -17570,7 +17570,7 @@ cmd_pctype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_reset(res->port_id); #endif @@ -17644,7 +17644,7 @@ cmd_pctype_mapping_get_parsed( { struct cmd_pctype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; int i, j, first_pctype; @@ -17653,7 +17653,7 @@ cmd_pctype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_get(res->port_id, mapping); #endif @@ -17671,7 +17671,7 @@ cmd_pctype_mapping_get_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E for (i = 0; i < RTE_PMD_I40E_FLOW_TYPE_MAX; i++) { if (mapping[i].pctype != 0ULL) { first_pctype = 1; @@ -17760,7 +17760,7 @@ cmd_pctype_mapping_update_parsed( { struct cmd_pctype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping; unsigned int i; unsigned int nb_item; @@ -17770,7 +17770,7 @@ cmd_pctype_mapping_update_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E nb_item = parse_item_list(res->pctype_list, "pctypes", RTE_PMD_I40E_PCTYPE_MAX, pctype_list, 1); mapping.flow_type = res->flow_type; @@ -17858,7 +17858,7 @@ cmd_ptype_mapping_get_parsed( { struct cmd_ptype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E int max_ptype_num = 256; struct rte_pmd_i40e_ptype_mapping mapping[max_ptype_num]; uint16_t count; @@ -17868,7 +17868,7 @@ cmd_ptype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_get(res->port_id, mapping, max_ptype_num, @@ -17889,7 +17889,7 @@ cmd_ptype_mapping_get_parsed( printf("programming error: (%s)\n", strerror(-ret)); } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!ret) { for (i = 0; i < count; i++) printf("%3d\t0x%08x\n", @@ -17967,7 +17967,7 @@ cmd_ptype_mapping_replace_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_replace(res->port_id, res->target, res->mask, @@ -18049,7 +18049,7 @@ cmd_ptype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_reset(res->port_id); #endif @@ -18126,13 +18126,13 @@ cmd_ptype_mapping_update_parsed( { struct cmd_ptype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_ptype_mapping mapping; #endif if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E mapping.hw_ptype = res->hw_ptype; mapping.sw_ptype = res->sw_ptype; ret = rte_pmd_i40e_ptype_mapping_update(res->port_id, @@ -19824,7 +19824,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, (cmdline_parse_inst_t *) &cmd_set_bonding_primary, @@ -20071,7 +20071,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_tx_offload_get_configuration, (cmdline_parse_inst_t *)&cmd_config_per_port_tx_offload, (cmdline_parse_inst_t *)&cmd_config_per_queue_tx_offload, -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF (cmdline_parse_inst_t *)&cmd_operate_bpf_ld_parse, (cmdline_parse_inst_t *)&cmd_operate_bpf_unld_parse, #endif diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 8ccd98956..91235a642 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -39,13 +39,13 @@ #include <rte_cycles.h> #include <rte_flow.h> #include <rte_errno.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include <rte_gro.h> @@ -4146,14 +4146,14 @@ get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info, return 0; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) { ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info); if (!ret) ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat); } #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) { ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info); if (!ret) @@ -4306,7 +4306,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg) void set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE int diag; if (is_rx) @@ -4361,12 +4361,12 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk) RTE_SET_USED(rate); RTE_SET_USED(q_msk); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (diag == -ENOTSUP) diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (diag == -ENOTSUP) diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif @@ -4662,7 +4662,7 @@ close_file(uint8_t *buf) void port_queue_region_info_display(portid_t port_id, void *buf) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint16_t i, j; struct rte_pmd_i40e_queue_regions *info = (struct rte_pmd_i40e_queue_regions *)buf; diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 2e8b9f8a9..7e9c7bdd6 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -25,37 +25,37 @@ sources = files('5tswap.c', 'util.c') deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci'] -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') deps += 'pdump' endif -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') +if dpdk_conf.has('RTE_LIB_LATENCYSTATS') deps += 'latencystats' endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') deps += 'net_bond' endif -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += 'net_bnxt' endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += 'net_i40e' endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif -if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') +if dpdk_conf.has('RTE_NET_DPAA') deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif -if dpdk_conf.has('RTE_LIBRTE_BPF') +if dpdk_conf.has('RTE_LIB_BPF') sources += files('bpf_cmd.c') deps += 'bpf' endif diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 1ead59579..98e6740e6 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -39,7 +39,7 @@ #include <rte_ether.h> #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #endif #include <rte_flow.h> @@ -50,7 +50,7 @@ static void usage(char* progname) { printf("usage: %s [EAL options] -- " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "[--interactive|-i] " "[--cmdline-file=FILENAME] " #endif @@ -60,7 +60,7 @@ usage(char* progname) "--portlist=PORTLIST " "--mbuf-size= | --total-num-mbufs= | " "--nb-cores= | --nb-ports= | " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "--eth-peers-configfile= | " "--eth-peer=X,M:M:M:M:M:M | " "--tx-ip=SRC,DST | --tx-udp=PORT | " @@ -73,7 +73,7 @@ usage(char* progname) "--vxlan-gpe-port= | --record-core-cycles | " "--record-burst-stats]\n", progname); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --interactive: run in interactive mode.\n"); printf(" --cmdline-file: execute cli commands before startup.\n"); #endif @@ -112,7 +112,7 @@ usage(char* progname) printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n"); printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet " "size to N bytes.\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --eth-peers-configfile=name: config file with ethernet addresses " "of peer ports.\n"); printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer " @@ -129,7 +129,7 @@ usage(char* progname) "the packet will be enqueued into the rx drop-queue. " "If the drop-queue doesn't exist, the packet is dropped. " "By default drop-queue=127.\n"); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS printf(" --latencystats=N: enable latency and jitter statistcs " "monitoring on forwarding lcore id N.\n"); #endif @@ -223,7 +223,7 @@ usage(char* progname) printf(" --record-burst-stats: enable display of RX and TX bursts.\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE static int init_peer_eth_addrs(char *config_filename) { @@ -586,7 +586,7 @@ launch_args_parse(int argc, char** argv) static struct option lgopts[] = { { "help", 0, 0, 0 }, -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE { "interactive", 0, 0, 0 }, { "cmdline-file", 1, 0, 0 }, { "auto-start", 0, 0, 0 }, @@ -615,10 +615,10 @@ launch_args_parse(int argc, char** argv) { "pkt-filter-report-hash", 1, 0, 0 }, { "pkt-filter-size", 1, 0, 0 }, { "pkt-filter-drop-queue", 1, 0, 0 }, -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS { "latencystats", 1, 0, 0 }, #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS { "bitrate-stats", 1, 0, 0 }, #endif { "disable-crc-strip", 0, 0, 0 }, @@ -691,7 +691,7 @@ launch_args_parse(int argc, char** argv) argvopt = argv; -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #define SHORTOPTS "i" #else #define SHORTOPTS "" @@ -699,7 +699,7 @@ launch_args_parse(int argc, char** argv) while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah", lgopts, &opt_idx)) != EOF) { switch (opt) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE case 'i': printf("Interactive-mode selected\n"); interactive = 1; @@ -715,7 +715,7 @@ launch_args_parse(int argc, char** argv) usage(argv[0]); rte_exit(EXIT_SUCCESS, "Displayed help\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (!strcmp(lgopts[opt_idx].name, "interactive")) { printf("Interactive-mode selected\n"); interactive = 1; @@ -982,7 +982,7 @@ launch_args_parse(int argc, char** argv) "drop queue %d invalid - must" "be >= 0 \n", n); } -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (!strcmp(lgopts[opt_idx].name, "latencystats")) { n = atoi(optarg); @@ -995,7 +995,7 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) { n = atoi(optarg); if (n >= 0) { diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index ccba71c07..8efe06c64 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -46,18 +46,18 @@ #include <rte_ethdev.h> #include <rte_dev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include <rte_pdump.h> #endif #include <rte_flow.h> #include <rte_metrics.h> -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS #include <rte_bitrate.h> #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS #include <rte_latencystats.h> #endif @@ -404,13 +404,13 @@ int do_mlockall = 0; * NIC bypass mode configuration options. */ -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS /* The NIC bypass watchdog timeout. */ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS /* * Set when latency stats is enabled in the commandline @@ -488,7 +488,7 @@ uint8_t record_burst_stats; unsigned int num_sockets = 0; unsigned int socket_ids[RTE_MAX_NUMA_NODES]; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS /* Bitrate statistics */ struct rte_stats_bitrates *bitrate_data; lcoreid_t bitrate_lcore_id; @@ -2064,7 +2064,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; @@ -2079,7 +2079,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0 && bitrate_lcore_id == rte_lcore_id()) { tics_current = rte_rdtsc(); @@ -2092,7 +2092,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) } } #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0 && latencystats_lcore_id == rte_lcore_id()) rte_latencystats_update(); @@ -3347,7 +3347,7 @@ init_port_config(void) return; map_port_queue_stats_mapping_registers(pid, port); -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS rte_pmd_ixgbe_bypass_init(pid); #endif @@ -3613,11 +3613,11 @@ signal_handler(int signum) if (signum == SIGINT || signum == SIGTERM) { printf("\nSignal %d received, preparing to exit...\n", signum); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* uninitialize packet capture framework */ rte_pdump_uninit(); #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif @@ -3659,7 +3659,7 @@ main(int argc, char** argv) if (ret != 0) rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* initialize packet capture framework */ rte_pdump_init(); #endif @@ -3682,10 +3682,10 @@ main(int argc, char** argv) "Check the core mask argument\n"); /* Bitrate/latency stats disabled by default */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS bitrate_enabled = 0; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS latencystats_enabled = 0; #endif @@ -3764,7 +3764,7 @@ main(int argc, char** argv) /* Init metrics library */ rte_metrics_init(rte_socket_id()); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) { int ret = rte_latencystats_init(1, NULL); if (ret) @@ -3776,7 +3776,7 @@ main(int argc, char** argv) #endif /* Setup bitrate stats */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0) { bitrate_data = rte_stats_bitrate_create(); if (bitrate_data == NULL) @@ -3786,7 +3786,7 @@ main(int argc, char** argv) } #endif -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (strlen(cmdline_filename) != 0) cmdline_read_from_file(cmdline_filename); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 227b69420..e447122d3 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -398,12 +398,12 @@ extern uint32_t param_total_num_mbufs; extern uint16_t stats_period; -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS extern uint8_t latencystats_enabled; extern lcoreid_t latencystats_lcore_id; #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS extern lcoreid_t bitrate_lcore_id; extern uint8_t bitrate_enabled; #endif diff --git a/app/test/meson.build b/app/test/meson.build index c5ce1d2c0..f0e404156 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -338,23 +338,23 @@ dump_test_names = [ # unit tests without requiring that the developer install the # DPDK libraries. Explicit linkage of drivers (plugin libraries) # in applications should not be used. -if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_RING') test_deps += 'mempool_ring' endif -if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_STACK') test_deps += 'mempool_stack' endif -if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') +if dpdk_conf.has('RTE_EVENT_SKELETON') test_deps += 'event_skeleton' endif -if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') +if dpdk_conf.has('RTE_LIB_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] fast_tests += [['telemetry_json_autotest', true], ['telemetry_data_autotest', true]] endif # The following linkages of drivers are required because # they are used via a driver-specific API. -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] @@ -363,7 +363,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') driver_test_names += 'link_bonding_mode4_autotest' endif endif -if dpdk_conf.has('RTE_LIBRTE_RING_PMD') +if dpdk_conf.has('RTE_NET_RING') test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' @@ -380,13 +380,13 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD') fast_tests += [['pdump_autotest', true]] endif -if dpdk_conf.has('RTE_LIBRTE_POWER') +if dpdk_conf.has('RTE_LIB_POWER') test_deps += 'power' endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') test_deps += 'kni' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') test_deps += 'pdump' endif @@ -403,7 +403,7 @@ cflags += '-fno-strict-aliasing' cflags += ['-DALLOW_INTERNAL_API'] test_dep_objs = [] -if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') +if dpdk_conf.has('RTE_LIB_COMPRESSDEV') compress_test_dep = dependency('zlib', required: false) if compress_test_dep.found() test_dep_objs += compress_test_dep @@ -413,7 +413,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') endif endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' test_deps += 'crypto_scheduler' endif diff --git a/app/test/process.h b/app/test/process.h index c3b378033..27f1b1c0e 100644 --- a/app/test/process.h +++ b/app/test/process.h @@ -24,8 +24,8 @@ #define exe "exe" #endif -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING #include <pthread.h> extern void *send_pkts(void *empty); extern uint16_t flag_for_send_pkts; @@ -45,8 +45,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) char *argv_cpy[numargs + 1]; int i, status; char path[32]; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING pthread_t thread; #endif #endif @@ -124,8 +124,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) } } /* parent process does a wait */ -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) pthread_create(&thread, NULL, &send_pkts, NULL); #endif @@ -133,8 +133,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) while (wait(&status) != pid) ; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) { flag_for_send_pkts = 0; pthread_join(thread, NULL); diff --git a/app/test/test.c b/app/test/test.c index 94d26ab1f..afabfe42f 100644 --- a/app/test/test.c +++ b/app/test/test.c @@ -12,7 +12,7 @@ #include <ctype.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #include <cmdline_rdline.h> #include <cmdline_parse.h> #include <cmdline_socket.h> @@ -25,12 +25,12 @@ extern cmdline_parse_ctx_t main_ctx[]; #include <rte_cycles.h> #include <rte_log.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER #include <rte_timer.h> #endif #include "test.h" -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include "test_pdump.h" #endif @@ -52,8 +52,8 @@ do_recursive_call(void) int (*action_fn)(void); } actions[] = { { "run_secondary_instances", test_mp_secondary }, -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING { "run_pdump_server_tests", test_pdump }, #endif #endif @@ -69,7 +69,7 @@ do_recursive_call(void) { "test_memory_flags", no_action }, { "test_file_prefix", no_action }, { "test_no_huge_flag", no_action }, -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER { "timer_secondary_spawn_wait", test_timer_secondary }, #endif }; @@ -91,7 +91,7 @@ int last_test_result; int main(int argc, char **argv) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE struct cmdline *cl; #endif char *extra_args; @@ -134,7 +134,7 @@ main(int argc, char **argv) goto out; } -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER if (rte_timer_subsystem_init() < 0) { ret = -1; goto out; @@ -163,7 +163,7 @@ main(int argc, char **argv) "HPET is not enabled, using TSC as default timer\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE cl = cmdline_stdin_new(main_ctx, "RTE>>"); if (cl == NULL) { ret = -1; @@ -191,7 +191,7 @@ main(int argc, char **argv) ret = 0; out: -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER rte_timer_subsystem_finalize(); #endif rte_eal_cleanup(); diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 153d00119..687a8830a 100644 --- a/app/test/test_cryptodev.c +++ b/app/test/test_cryptodev.c @@ -18,7 +18,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #include <rte_cryptodev_scheduler_operations.h> #endif @@ -40,7 +40,7 @@ #include "test_cryptodev_aead_test_vectors.h" #include "test_cryptodev_hmac_test_vectors.h" #include "test_cryptodev_mixed_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "test_cryptodev_security_pdcp_test_vectors.h" #include "test_cryptodev_security_pdcp_test_func.h" #include "test_cryptodev_security_docsis_test_vectors.h" @@ -74,17 +74,17 @@ struct crypto_unittest_params { struct rte_crypto_sym_xform cipher_xform; struct rte_crypto_sym_xform auth_xform; struct rte_crypto_sym_xform aead_xform; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_docsis_xform docsis_xform; #endif union { struct rte_cryptodev_sym_session *sess; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_session *sec_session; #endif }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_action_type type; #endif struct rte_crypto_op *op; @@ -475,7 +475,7 @@ testsuite_setup(void) } } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER char vdev_args[VDEV_ARGS_SIZE] = {""}; char temp_str[VDEV_ARGS_SIZE] = {"mode=multi-core," "ordering=enable,name=cryptodev_test_scheduler,corelist="}; @@ -522,7 +522,7 @@ testsuite_setup(void) i, RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); } } -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { @@ -695,7 +695,7 @@ ut_teardown(void) struct rte_cryptodev_stats stats; /* free crypto session structure */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ut_params->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) { if (ut_params->sec_session) { rte_security_session_destroy(rte_cryptodev_get_sec_ctx @@ -7085,7 +7085,7 @@ test_authenticated_encryption(const struct aead_test_data *tdata) } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int security_proto_supported(enum rte_security_session_action_type action, enum rte_security_session_protocol proto) @@ -11710,7 +11710,7 @@ test_chacha20_poly1305_decrypt_test_case_rfc8439(void) return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* global AESNI slave IDs for the scheduler test */ uint8_t aesni_ids[2]; @@ -11930,7 +11930,7 @@ static struct unit_test_suite cryptodev_scheduler_testsuite = { } }; -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ static struct unit_test_suite cryptodev_testsuite = { .suite_name = "Crypto Unit Test Suite", @@ -12551,7 +12551,7 @@ static struct unit_test_suite cryptodev_testsuite = { TEST_CASE_ST(ut_setup, ut_teardown, test_verify_auth_aes_cmac_cipher_null_test_case_1), -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY TEST_CASE_ST(ut_setup_security, ut_teardown, test_PDCP_PROTO_all), TEST_CASE_ST(ut_setup_security, ut_teardown, @@ -12877,7 +12877,7 @@ test_cryptodev_mrvl(void) return unit_test_suite_runner(&cryptodev_mrvl_testsuite); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER static int test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/) diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h index d11d7cee7..e261dfe36 100644 --- a/app/test/test_cryptodev_hash_test_vectors.h +++ b/app/test/test_cryptodev_hash_test_vectors.h @@ -5,7 +5,7 @@ #ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ #define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ -#ifdef RTE_LIBRTE_PMD_AESNI_MB +#ifdef RTE_CRYPTO_AESNI_MB #include <intel-ipsec-mb.h> #endif diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c index b019656b2..fc7d1a2f0 100644 --- a/app/test/test_eal_flags.c +++ b/app/test/test_eal_flags.c @@ -344,7 +344,7 @@ test_invalid_b_flag(void) static int test_invalid_vdev_flag(void) { -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING #ifdef RTE_EXEC_ENV_FREEBSD /* BSD target doesn't support prefixes at this point, and we also need to * run another primary process here */ @@ -1504,7 +1504,7 @@ test_eal_flags(void) return ret; } -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING ret = test_invalid_vdev_flag(); if (ret < 0) { printf("Error in test_invalid_vdev_flag()\n"); diff --git a/app/test/test_func_reentrancy.c b/app/test/test_func_reentrancy.c index f5ddd03d7..2a0c134a9 100644 --- a/app/test/test_func_reentrancy.c +++ b/app/test/test_func_reentrancy.c @@ -27,15 +27,15 @@ #include <rte_spinlock.h> #include <rte_malloc.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> #include <rte_jhash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -200,7 +200,7 @@ mempool_create_lookup(__rte_unused void *arg) return 0; } -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH static void hash_clean(unsigned lcore_id) { @@ -328,9 +328,9 @@ fbk_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM static void lpm_clean(unsigned int lcore_id) { @@ -388,7 +388,7 @@ lpm_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ struct test_case{ case_func_t func; @@ -403,13 +403,13 @@ struct test_case test_cases[] = { { ring_create_lookup, NULL, ring_clean, "ring create/lookup" }, { mempool_create_lookup, NULL, mempool_clean, "mempool create/lookup" }, -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH { hash_create_free, NULL, hash_clean, "hash create/free" }, { fbk_create_free, NULL, fbk_clean, "fbk create/free" }, -#endif /* RTE_LIBRTE_HASH */ -#ifdef RTE_LIBRTE_LPM +#endif /* RTE_LIB_HASH */ +#ifdef RTE_LIB_LPM { lpm_create_free, NULL, lpm_clean, "lpm create/free" }, -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ }; /** diff --git a/app/test/test_kni.c b/app/test/test_kni.c index e47ab36e0..402f17064 100644 --- a/app/test/test_kni.c +++ b/app/test/test_kni.c @@ -11,7 +11,7 @@ #include "test.h" -#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI) +#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI) static int test_kni(void) diff --git a/app/test/test_mp_secondary.c b/app/test/test_mp_secondary.c index 3a655c340..e1a7b4ae4 100644 --- a/app/test/test_mp_secondary.c +++ b/app/test/test_mp_secondary.c @@ -34,14 +34,14 @@ #include <rte_log.h> #include <rte_mempool.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -157,7 +157,7 @@ run_object_creation_tests(void) } printf("# Checked rte_mempool_create() OK\n"); -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH const struct rte_hash_parameters hash_params = { .name = "test_mp_hash" }; rte_errno=0; if ((rte_hash_create(&hash_params) != NULL) && @@ -177,7 +177,7 @@ run_object_creation_tests(void) printf("# Checked rte_fbk_hash_create() OK\n"); #endif -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM rte_errno=0; struct rte_lpm_config config; diff --git a/app/test/test_power.c b/app/test/test_power.c index 0c597c33f..da1d67c0a 100644 --- a/app/test/test_power.c +++ b/app/test/test_power.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power(void) diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c index d203810da..731c6b4dc 100644 --- a/app/test/test_power_cpufreq.c +++ b/app/test/test_power_cpufreq.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_cpufreq(void) diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c index 785cd048d..cc66b7a8a 100644 --- a/app/test/test_power_kvm_vm.c +++ b/app/test/test_power_kvm_vm.c @@ -10,7 +10,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_kvm_vm(void) diff --git a/app/test/test_table.c b/app/test/test_table.c index bc8d8a2e1..95034148c 100644 --- a/app/test/test_table.c +++ b/app/test/test_table.c @@ -180,7 +180,7 @@ test_table(void) } } -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL printf("\n\n\n\n************ACL tests************\n"); if (test_table_acl() < 0) { ret = TEST_FAILED; diff --git a/app/test/test_table.h b/app/test/test_table.h index 43b885587..209bdbff2 100644 --- a/app/test/test_table.h +++ b/app/test/test_table.h @@ -10,7 +10,7 @@ #include <rte_table_array.h> #include <rte_pipeline.h> -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL #include <rte_table_acl.h> #endif diff --git a/app/test/test_table_combined.h b/app/test/test_table_combined.h index d05866240..fb94dbb94 100644 --- a/app/test/test_table_combined.h +++ b/app/test/test_table_combined.h @@ -6,7 +6,7 @@ int test_table_stub_combined(void); int test_table_lpm_combined(void); int test_table_lpm_ipv6_combined(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash8unoptimized(void); diff --git a/app/test/test_table_tables.h b/app/test/test_table_tables.h index 7570e9963..530633a01 100644 --- a/app/test/test_table_tables.h +++ b/app/test/test_table_tables.h @@ -7,7 +7,7 @@ int test_table_hash_cuckoo(void); int test_table_lpm(void); int test_table_lpm_ipv6(void); int test_table_array(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash_unoptimized(void); diff --git a/config/arm/meson.build b/config/arm/meson.build index 344457e8a..b49203fa8 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -21,9 +21,9 @@ flags_common_default = [ # ['RTE_ARM64_MEMCPY_ALIGN_MASK', 0xF], # ['RTE_ARM64_MEMCPY_STRICT_ALIGN', false], - ['RTE_LIBRTE_FM10K_PMD', false], - ['RTE_LIBRTE_SFC_EFX_PMD', false], - ['RTE_LIBRTE_AVP_PMD', false], + ['RTE_NET_FM10K', false], + ['RTE_NET_SFC_EFX', false], + ['RTE_NET_AVP', false], ['RTE_SCHED_VECTOR', false], ['RTE_ARM_USE_WFE', false], diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c index b0055b164..1a9dd18b9 100644 --- a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c +++ b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c @@ -120,7 +120,7 @@ dpaa2_core_cluster_sdest(int cpu_id) return dpaa2_core_cluster_base + x; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 static void dpaa2_affine_dpio_intr_to_respective_core(int32_t dpio_id, int cpu_id) { @@ -242,7 +242,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) return -1; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 if (dpaa2_dpio_intr_init(dpio_dev, cpu_id)) { DPAA2_BUS_ERR("Interrupt registration failed for dpio"); return -1; @@ -255,7 +255,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) static void dpaa2_put_qbman_swp(struct dpaa2_dpio_dev *dpio_dev) { if (dpio_dev) { -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 dpaa2_dpio_intr_deinit(dpio_dev); #endif rte_atomic16_clear(&dpio_dev->ref_count); diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h index 1c07f2233..0444b50a1 100644 --- a/drivers/compress/qat/qat_comp.h +++ b/drivers/compress/qat/qat_comp.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_H_ #define _QAT_COMP_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h index ed2712060..252b4b24e 100644 --- a/drivers/compress/qat/qat_comp_pmd.h +++ b/drivers/compress/qat/qat_comp_pmd.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_PMD_H_ #define _QAT_COMP_PMD_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h index e0c7b4f7c..8e9b8bca2 100644 --- a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h +++ b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h @@ -7,7 +7,7 @@ #include <intel-ipsec-mb.h> -#if defined(RTE_LIBRTE_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) +#if defined(RTE_LIB_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) #define AESNI_MB_DOCSIS_SEC_ENABLED 1 #include <rte_security.h> #include <rte_security_driver.h> diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c index 109e61ae1..41401c6f0 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -58,7 +58,7 @@ static uint8_t cryptodev_driver_id; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline int build_proto_compound_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, @@ -1355,7 +1355,7 @@ build_sec_fd(struct rte_crypto_op *op, if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) sess = (dpaa2_sec_session *)get_sym_session_private_data( op->sym->session, cryptodev_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) sess = (dpaa2_sec_session *)get_sec_session_private_data( op->sym->sec_session); @@ -1383,7 +1383,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_sg_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: case DPAA2_SEC_PDCP: ret = build_proto_compound_sg_fd(sess, op, fd, bpid); @@ -1407,7 +1407,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: ret = build_proto_fd(sess, op, fd, bpid); break; @@ -1522,7 +1522,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, return num_tx; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct rte_crypto_op * sec_simple_fd_to_mbuf(const struct qbman_fd *fd) { @@ -1561,7 +1561,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) struct ctxt_priv *priv; struct rte_mbuf *dst, *src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single) return sec_simple_fd_to_mbuf(fd); #endif @@ -1594,7 +1594,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) } else dst = src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { uint16_t len = DPAA2_GET_FD_LEN(fd); dst->pkt_len = len; @@ -2539,7 +2539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev, return ret; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, dpaa2_sec_session *session, @@ -3698,7 +3698,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa2_sec_sym_session_clear, }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa2_sec_capabilities_get(void *device __rte_unused) { @@ -3736,7 +3736,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) struct dpaa2_sec_dev_private *internals; struct rte_device *dev = cryptodev->device; struct rte_dpaa2_device *dpaa2_dev; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct fsl_mc_io *dpseci; @@ -3775,7 +3775,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA2_SEC_DEBUG("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h index 528b64ef8..5d9cf12c4 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h @@ -8,7 +8,7 @@ #ifndef _DPAA2_SEC_PMD_PRIVATE_H_ #define _DPAA2_SEC_PMD_PRIVATE_H_ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -141,7 +141,7 @@ struct dpaa2_sec_aead_ctxt { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * The structure is to be filled by user for PDCP Protocol */ @@ -193,7 +193,7 @@ typedef struct dpaa2_sec_session_entry { struct dpaa2_sec_aead_ctxt aead_ctxt; } ext_params; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct dpaa2_pdcp_ctxt pdcp; #endif }; @@ -550,7 +550,7 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c index 97002170b..c4d1747a7 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.c +++ b/drivers/crypto/dpaa_sec/dpaa_sec.c @@ -15,7 +15,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif #include <rte_cycles.h> @@ -229,7 +229,7 @@ static inline int is_decode(dpaa_sec_session *ses) return ses->dir == DIR_DEC; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses) { @@ -408,7 +408,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses) memset(cdb, 0, sizeof(struct sec_cdb)); switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_IPSEC: shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses); break; @@ -1539,7 +1539,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses) return cf; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct dpaa_sec_job * build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses) { @@ -1714,7 +1714,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, op->sym->session, cryptodev_driver_id); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case RTE_CRYPTO_OP_SECURITY_SESSION: ses = (dpaa_sec_session *) get_sec_session_private_data( @@ -1761,7 +1761,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((op->sym->m_dst == NULL) || rte_pktmbuf_is_contiguous(op->sym->m_dst))) { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto(op, ses); @@ -1795,7 +1795,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, } } else { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto_sg(op, ses); @@ -1852,7 +1852,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((auth_tail_len << 16) | auth_hdr_len); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* In case of PDCP, per packet HFN is stored in * mbuf priv after sym_op. */ @@ -2467,7 +2467,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev, } } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, struct rte_security_ipsec_xform *ipsec_xform, @@ -3271,7 +3271,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa_sec_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa_sec_capabilities_get(void *device __rte_unused) { @@ -3310,7 +3310,7 @@ static int dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) { struct dpaa_sec_dev_private *internals; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct dpaa_sec_qp *qp; @@ -3347,7 +3347,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA_SEC_WARN("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h index 2cd50cc8d..45ae53499 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.h +++ b/drivers/crypto/dpaa_sec/dpaa_sec.h @@ -98,7 +98,7 @@ struct sec_cdb { uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE]; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /*! * The structure is to be filled by user as a part of * dpaa_sec_proto_ctxt for PDCP Protocol @@ -125,7 +125,7 @@ typedef struct dpaa_sec_session_entry { enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/ enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/ enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/ #endif union { @@ -168,7 +168,7 @@ typedef struct dpaa_sec_session_entry { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct sec_pdcp_ctxt pdcp; #endif }; @@ -568,7 +568,7 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c index e3f98a76b..4b7676deb 100644 --- a/drivers/crypto/qat/qat_sym.c +++ b/drivers/crypto/qat/qat_sym.c @@ -180,7 +180,7 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg, } else if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { ctx = (struct qat_sym_session *)get_sym_session_private_data( op->sym->session, qat_sym_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY } else { ctx = (struct qat_sym_session *)get_sec_session_private_data( op->sym->sec_session); diff --git a/drivers/crypto/qat/qat_sym.h b/drivers/crypto/qat/qat_sym.h index 1a9748849..da67a56b3 100644 --- a/drivers/crypto/qat/qat_sym.h +++ b/drivers/crypto/qat/qat_sym.h @@ -6,7 +6,7 @@ #define _QAT_SYM_H_ #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_net_crc.h> #endif @@ -135,7 +135,7 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx, return sym_op->cipher.data.length - last_block_len; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op) { @@ -231,7 +231,7 @@ qat_sym_process_response(void **op, uint8_t *resp) rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; } else { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t is_docsis_sec = 0; if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { @@ -256,7 +256,7 @@ qat_sym_process_response(void **op, uint8_t *resp) if (sess->bpi_ctx) { qat_bpicipher_postprocess(sess, rx_op); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (is_docsis_sec) qat_crc_verify(sess, rx_op); #endif diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h index 4ee798992..f7cab2f47 100644 --- a/drivers/crypto/qat/qat_sym_capabilities.h +++ b/drivers/crypto/qat/qat_sym_capabilities.h @@ -731,7 +731,7 @@ }, } \ } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define QAT_SECURITY_SYM_CAPABILITIES \ { /* AES DOCSIS BPI */ \ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c index 314742f53..a291004cf 100644 --- a/drivers/crypto/qat/qat_sym_pmd.c +++ b/drivers/crypto/qat/qat_sym_pmd.c @@ -8,7 +8,7 @@ #include <rte_malloc.h> #include <rte_pci.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -39,7 +39,7 @@ static const struct rte_cryptodev_capabilities qat_gen3_sym_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities qat_security_sym_capabilities[] = { QAT_SECURITY_SYM_CAPABILITIES, @@ -261,7 +261,7 @@ static struct rte_cryptodev_ops crypto_qat_ops = { .sym_session_clear = qat_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * qat_security_cap_get(void *device __rte_unused) { @@ -385,7 +385,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, "QAT_SYM_CAPA_GEN_%d", qat_pci_dev->qat_dev_gen); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; security_instance = rte_malloc("qat_sec", sizeof(struct rte_security_ctx), @@ -462,7 +462,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, return 0; error: -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif @@ -487,7 +487,7 @@ qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev) /* free crypto device */ cryptodev = rte_cryptodev_pmd_get_dev(qat_pci_dev->sym_dev->sym_dev_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h index f32a77e60..e0992cbe2 100644 --- a/drivers/crypto/qat/qat_sym_pmd.h +++ b/drivers/crypto/qat/qat_sym_pmd.h @@ -9,7 +9,7 @@ #include <rte_ether.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c index ed4d00159..23d059bf8 100644 --- a/drivers/crypto/qat/qat_sym_session.c +++ b/drivers/crypto/qat/qat_sym_session.c @@ -14,7 +14,7 @@ #include <rte_log.h> #include <rte_malloc.h> #include <rte_crypto_sym.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -2109,7 +2109,7 @@ int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int qat_sec_session_check_docsis(struct rte_security_session_conf *conf) { diff --git a/drivers/crypto/qat/qat_sym_session.h b/drivers/crypto/qat/qat_sym_session.h index 9f1033baf..011e5bb7a 100644 --- a/drivers/crypto/qat/qat_sym_session.h +++ b/drivers/crypto/qat/qat_sym_session.h @@ -6,7 +6,7 @@ #include <rte_crypto.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -159,7 +159,7 @@ qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg); int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY int qat_security_session_create(void *dev, struct rte_security_session_conf *conf, struct rte_security_session *sess, struct rte_mempool *mempool); diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b98e210e..7cdb4dfe6 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -33,7 +33,7 @@ #include <rte_random.h> #include <rte_dev.h> #include <rte_hash_crc.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -1151,7 +1151,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) /* Unlock any pending hardware semaphore */ ixgbe_swfw_lock_reset(hw); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ if (ixgbe_ipsec_ctx_create(eth_dev)) return -ENOMEM; @@ -3053,7 +3053,7 @@ ixgbe_dev_close(struct rte_eth_dev *dev) /* Remove all Traffic Manager configuration */ ixgbe_tm_conf_uninit(dev); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(dev->security_ctx); #endif diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 9bdef87fb..33905f713 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -12,7 +12,7 @@ #include "base/ixgbe_dcb_82599.h" #include "base/ixgbe_dcb_82598.h" #include "ixgbe_bypass.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "ixgbe_ipsec.h" #endif #include <rte_flow.h> @@ -494,7 +494,7 @@ struct ixgbe_adapter { struct ixgbe_filter_info filter; struct ixgbe_l2_tn_info l2_tn; struct ixgbe_bw_conf bw_conf; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct ixgbe_ipsec ipsec; #endif bool rx_bulk_alloc_allowed; diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index b2a2bfc02..6b3dea46e 100644 --- a/drivers/net/ixgbe/ixgbe_flow.c +++ b/drivers/net/ixgbe/ixgbe_flow.c @@ -215,7 +215,7 @@ cons_parse_ntuple_filter(const struct rte_flow_attr *attr, memset(ð_null, 0, sizeof(struct rte_flow_item_eth)); memset(&vlan_null, 0, sizeof(struct rte_flow_item_vlan)); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /** * Special case for flow action type RTE_FLOW_ACTION_TYPE_SECURITY */ @@ -629,7 +629,7 @@ ixgbe_parse_ntuple_filter(struct rte_eth_dev *dev, if (ret) return ret; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (filter->proto == IPPROTO_ESP) return 0; @@ -3057,7 +3057,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev, ret = ixgbe_parse_ntuple_filter(dev, attr, pattern, actions, &ntuple_filter, error); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (ntuple_filter.proto == IPPROTO_ESP) return flow; diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 29d385c06..cc861187d 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -452,7 +452,7 @@ ixgbe_set_xmit_ctx(struct ixgbe_tx_queue *txq, seqnum_seed |= tx_offload.l2_len << IXGBE_ADVTXD_TUNNEL_LEN; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ol_flags & PKT_TX_SEC_OFFLOAD) { union ixgbe_crypto_tx_desc_md *md = (union ixgbe_crypto_tx_desc_md *)mdata; @@ -645,7 +645,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint32_t ctx = 0; uint32_t new_ctx; union ixgbe_tx_offload tx_offload; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec; #endif @@ -675,7 +675,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, * are needed for offload functionality. */ ol_flags = tx_pkt->ol_flags; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY use_ipsec = txq->using_ipsec && (ol_flags & PKT_TX_SEC_OFFLOAD); #endif @@ -689,7 +689,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, tx_offload.tso_segsz = tx_pkt->tso_segsz; tx_offload.outer_l2_len = tx_pkt->outer_l2_len; tx_offload.outer_l3_len = tx_pkt->outer_l3_len; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) { union ixgbe_crypto_tx_desc_md *ipsec_mdata = (union ixgbe_crypto_tx_desc_md *) @@ -876,7 +876,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, } olinfo_status |= (pkt_len << IXGBE_ADVTXD_PAYLEN_SHIFT); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) olinfo_status |= IXGBE_ADVTXD_POPTS_IPSEC; #endif @@ -1460,7 +1460,7 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status) pkt_flags |= PKT_RX_EIP_CKSUM_BAD; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (rx_status & IXGBE_RXD_STAT_SECP) { pkt_flags |= PKT_RX_SEC_OFFLOAD; if (rx_status & IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG) @@ -2400,7 +2400,7 @@ ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt) { struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue; if (txq->offloads == 0 && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) { @@ -2496,7 +2496,7 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq) { /* Use a simple Tx queue (no offloads, no multi segs) if possible */ if ((txq->offloads == 0) && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { @@ -2555,7 +2555,7 @@ ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) tx_offload_capa |= DEV_TX_OFFLOAD_SECURITY; #endif @@ -2723,7 +2723,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, txq->offloads = offloads; txq->ops = &def_txq_ops; txq->tx_deferred_start = tx_conf->tx_deferred_start; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY txq->using_ipsec = !!(dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_SECURITY); #endif @@ -3006,7 +3006,7 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) offloads |= DEV_RX_OFFLOAD_SECURITY; #endif @@ -4835,7 +4835,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev) struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i]; rxq->rx_using_sse = rx_using_sse; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rxq->using_ipsec = !!(dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY); #endif @@ -5347,7 +5347,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev) ixgbe_setup_loopback_link_x540_x550(hw, true); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if ((dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY) || (dev->data->dev_conf.txmode.offloads & diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h index 0b5589ef4..6d2f7c9da 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.h +++ b/drivers/net/ixgbe/ixgbe_rxtx.h @@ -113,7 +113,7 @@ struct ixgbe_rx_queue { uint16_t rx_free_trigger; /**< triggers rx buffer allocation */ uint8_t rx_using_sse; /**< indicates that vector RX is in use */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec RX feature is in use */ #endif @@ -161,7 +161,7 @@ union ixgbe_tx_offload { /* fields for TX offloading of tunnels */ uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */ uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* inline ipsec related*/ uint64_t sa_idx:8; /**< TX SA database entry index */ uint64_t sec_pad_len:4; /**< padding length */ @@ -230,7 +230,7 @@ struct ixgbe_tx_queue { struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM]; const struct ixgbe_txq_ops *ops; /**< txq ops */ uint8_t tx_deferred_start; /**< not in global dev start. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec TX feature is in use */ #endif diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c index e77a7f31c..586a26180 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c +++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c @@ -93,7 +93,7 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq) IXGBE_PCI_REG_WC_WRITE(rxq->rdt_reg_addr, rx_id); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void desc_to_olflags_v_ipsec(__m128i descs[4], struct rte_mbuf **rx_pkts) { @@ -318,7 +318,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, volatile union ixgbe_adv_rx_desc *rxdp; struct ixgbe_rx_entry *sw_ring; uint16_t nb_pkts_recd; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec = rxq->using_ipsec; #endif int pos; @@ -484,7 +484,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, /* set ol_flags with vlan packet type */ desc_to_olflags_v(descs, mbuf_init, vlan_flags, &rx_pkts[pos]); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (unlikely(use_ipsec)) desc_to_olflags_v_ipsec(descs, &rx_pkts[pos]); #endif diff --git a/drivers/net/kni/meson.build b/drivers/net/kni/meson.build index 0539b4768..d9fa898d1 100644 --- a/drivers/net/kni/meson.build +++ b/drivers/net/kni/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Intel Corporation # this driver can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') reason = 'missing dependency, DPDK KNI library' sources = files('rte_eth_kni.c') deps += 'kni' diff --git a/drivers/net/netvsc/meson.build b/drivers/net/netvsc/meson.build index e7f449302..f3f52f732 100644 --- a/drivers/net/netvsc/meson.build +++ b/drivers/net/netvsc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Microsoft Corporation -build = dpdk_conf.has('RTE_LIBRTE_VMBUS_BUS') +build = dpdk_conf.has('RTE_BUS_VMBUS') reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') diff --git a/drivers/net/vhost/meson.build b/drivers/net/vhost/meson.build index d7930862a..963b30f20 100644 --- a/drivers/net/vhost/meson.build +++ b/drivers/net/vhost/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('rte_eth_vhost.c') install_headers('rte_eth_vhost.h') diff --git a/drivers/raw/dpaa2_cmdif/meson.build b/drivers/raw/dpaa2_cmdif/meson.build index e7656a3cd..06c0fe756 100644 --- a/drivers/raw/dpaa2_cmdif/meson.build +++ b/drivers/raw/dpaa2_cmdif/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') diff --git a/drivers/raw/dpaa2_qdma/meson.build b/drivers/raw/dpaa2_qdma/meson.build index b9b08153a..3eeab0d1c 100644 --- a/drivers/raw/dpaa2_qdma/meson.build +++ b/drivers/raw/dpaa2_qdma/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') diff --git a/drivers/raw/ifpga/base/opae_osdep.h b/drivers/raw/ifpga/base/opae_osdep.h index 416cef01c..18e6a11aa 100644 --- a/drivers/raw/ifpga/base/opae_osdep.h +++ b/drivers/raw/ifpga/base/opae_osdep.h @@ -8,7 +8,7 @@ #include <string.h> #include <stdbool.h> -#ifdef RTE_LIBRTE_EAL +#ifdef RTE_LIB_EAL #include "osdep_rte/osdep_generic.h" #else #include "osdep_raw/osdep_generic.h" diff --git a/drivers/vdpa/ifc/meson.build b/drivers/vdpa/ifc/meson.build index b179987f9..9d256af4b 100644 --- a/drivers/vdpa/ifc/meson.build +++ b/drivers/vdpa/ifc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build index 9fec7f883..5244cd4ff 100644 --- a/examples/distributor/meson.build +++ b/examples/distributor/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # require the power library -build = dpdk_conf.has('RTE_LIBRTE_POWER') +build = dpdk_conf.has('RTE_LIB_POWER') allow_experimental_apis = true deps += ['distributor', 'power'] diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c index db8150efd..13f9ba379 100644 --- a/examples/ethtool/lib/rte_ethtool.c +++ b/examples/ethtool/lib/rte_ethtool.c @@ -9,7 +9,7 @@ #include <rte_ethdev.h> #include <rte_ether.h> #include <rte_bus_pci.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif #include "rte_ethtool.h" @@ -395,7 +395,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id) /* Set VF vf_rx_mode, VF unsupport status is discard */ for (vf = 0; vf < num_vfs; vf++) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE rte_pmd_ixgbe_set_vf_rxmode(port_id, vf, ETH_VMDQ_ACCEPT_UNTAG, 0); #endif diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index fdfdd1971..cc8edac3d 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -13,7 +13,7 @@ sources = files('lib/rte_ethtool.c', includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f1a045a0a..6afbaa680 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' allow_experimental_apis = true -build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') +build = dpdk_conf.has('RTE_RAW_IOAT') deps += ['raw_ioat'] diff --git a/examples/ip_pipeline/kni.c b/examples/ip_pipeline/kni.c index 451968593..a2d3331cb 100644 --- a/examples/ip_pipeline/kni.c +++ b/examples/ip_pipeline/kni.c @@ -24,7 +24,7 @@ kni_init(void) { TAILQ_INIT(&kni_list); -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI rte_kni_init(KNI_MAX); #endif @@ -46,7 +46,7 @@ kni_find(const char *name) return NULL; } -#ifndef RTE_LIBRTE_KNI +#ifndef RTE_LIB_KNI struct kni * kni_create(const char *name __rte_unused, diff --git a/examples/ip_pipeline/kni.h b/examples/ip_pipeline/kni.h index c3856456d..118f48df7 100644 --- a/examples/ip_pipeline/kni.h +++ b/examples/ip_pipeline/kni.h @@ -8,7 +8,7 @@ #include <stdint.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_kni.h> #endif @@ -17,7 +17,7 @@ struct kni { TAILQ_ENTRY(kni) node; char name[NAME_SIZE]; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_kni *k; #endif }; diff --git a/examples/ip_pipeline/pipeline.c b/examples/ip_pipeline/pipeline.c index b627310a0..7ebabcae9 100644 --- a/examples/ip_pipeline/pipeline.c +++ b/examples/ip_pipeline/pipeline.c @@ -11,7 +11,7 @@ #include <rte_string_fns.h> #include <rte_port_ethdev.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_port_kni.h> #endif #include <rte_port_ring.h> @@ -28,7 +28,7 @@ #include <rte_table_lpm_ipv6.h> #include <rte_table_stub.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include "kni.h" #endif #include "link.h" @@ -160,7 +160,7 @@ pipeline_port_in_create(const char *pipeline_name, struct rte_port_ring_reader_params ring; struct rte_port_sched_reader_params sched; struct rte_port_fd_reader_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_reader_params kni; #endif struct rte_port_source_params source; @@ -264,7 +264,7 @@ pipeline_port_in_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_IN_KNI: { struct kni *kni; @@ -404,7 +404,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ring_writer_params ring; struct rte_port_sched_writer_params sched; struct rte_port_fd_writer_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_params kni; #endif struct rte_port_sink_params sink; @@ -415,7 +415,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ethdev_writer_nodrop_params ethdev; struct rte_port_ring_writer_nodrop_params ring; struct rte_port_fd_writer_nodrop_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_nodrop_params kni; #endif struct rte_port_sym_crypto_writer_nodrop_params sym_crypto; @@ -537,7 +537,7 @@ pipeline_port_out_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_OUT_KNI: { struct kni *kni; diff --git a/examples/kni/meson.build b/examples/kni/meson.build index fd6ae4442..58639b139 100644 --- a/examples/kni/meson.build +++ b/examples/kni/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # this app can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') deps += ['kni', 'bus_pci'] sources = files( 'main.c' diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c index 820470db5..8ea2677e5 100644 --- a/examples/l2fwd-crypto/main.c +++ b/examples/l2fwd-crypto/main.c @@ -43,7 +43,7 @@ #include <rte_prefetch.h> #include <rte_random.h> #include <rte_hexdump.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -2273,7 +2273,7 @@ initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports, * (one for the header, one for the private data) */ if (!strcmp(dev_info.driver_name, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 9002d62a6..1813f015b 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' deps += 'cryptodev' -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif allow_experimental_apis = true diff --git a/examples/l3fwd-power/meson.build b/examples/l3fwd-power/meson.build index 4cd694710..eb8aef306 100644 --- a/examples/l3fwd-power/meson.build +++ b/examples/l3fwd-power/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index bac6e5cd2..b0201f68b 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -15,6 +15,6 @@ cflags += ['-D_FILE_OFFSET_BITS=64'] sources = files( 'ntb_fwd.c' ) -if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') +if dpdk_conf.has('RTE_RAW_NTB') deps += 'raw_ntb' endif diff --git a/examples/vhost_crypto/meson.build b/examples/vhost_crypto/meson.build index 2485f3bd1..b2c125e2f 100644 --- a/examples/vhost_crypto/meson.build +++ b/examples/vhost_crypto/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') allow_experimental_apis = true deps += ['vhost', 'cryptodev'] sources = files( diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c index 1d00a6cf6..228f06803 100644 --- a/examples/vm_power_manager/channel_monitor.c +++ b/examples/vm_power_manager/channel_monitor.c @@ -28,7 +28,7 @@ #include <rte_atomic.h> #include <rte_cycles.h> #include <rte_ethdev.h> -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif #include <rte_power.h> @@ -439,7 +439,7 @@ get_pfid(struct policy *pol) for (i = 0; i < pol->pkt.nb_mac_to_monitor; i++) { RTE_ETH_FOREACH_DEV(x) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_query_vfid_by_mac(x, (struct rte_ether_addr *)&(pol->pkt.vfid[i])); #else @@ -538,13 +538,13 @@ get_pkt_diff(struct policy *pol) vsi_pkt_count_prev_total = 0; double rdtsc_curr, rdtsc_diff, diff; int x; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_eth_stats vf_stats; #endif for (x = 0; x < pol->pkt.nb_mac_to_monitor; x++) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E /*Read vsi stats*/ if (rte_pmd_i40e_get_vf_stats(x, pol->pfid[x], &vf_stats) == 0) vsi_pkt_count = vf_stats.ipackets; diff --git a/examples/vm_power_manager/guest_cli/meson.build b/examples/vm_power_manager/guest_cli/meson.build index 8c725420d..cd9526601 100644 --- a/examples/vm_power_manager/guest_cli/meson.build +++ b/examples/vm_power_manager/guest_cli/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c index 44d2508b1..17b38406f 100644 --- a/examples/vm_power_manager/main.c +++ b/examples/vm_power_manager/main.c @@ -31,13 +31,13 @@ #include "vm_power_cli.h" #include "oob_monitor.h" #include "parse.h" -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif @@ -397,16 +397,16 @@ main(int argc, char **argv) eth.addr_bytes[5] = w + 0xf0; ret = -ENOTSUP; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_mac_addr(portid, w, ð); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr( portid, w, ð); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr( portid, w, ð); diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 2dd132015..1f813fbe8 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -6,22 +6,22 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif deps += ['power'] -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += ['net_bnxt'] endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += ['net_i40e'] endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += ['net_ixgbe'] endif diff --git a/lib/librte_eal/linux/eal.c b/lib/librte_eal/linux/eal.c index 9cf0e2ec0..9b579b820 100644 --- a/lib/librte_eal/linux/eal.c +++ b/lib/librte_eal/linux/eal.c @@ -1085,7 +1085,7 @@ rte_eal_init(int argc, char **argv) */ iova_mode = RTE_IOVA_VA; RTE_LOG(DEBUG, EAL, "Physical addresses are unavailable, selecting IOVA as VA mode.\n"); -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) } else if (rte_eal_check_module("rte_kni") == 1) { iova_mode = RTE_IOVA_PA; RTE_LOG(DEBUG, EAL, "KNI is loaded, selecting IOVA as PA mode for better KNI performance.\n"); @@ -1102,7 +1102,7 @@ rte_eal_init(int argc, char **argv) RTE_LOG(DEBUG, EAL, "IOMMU is not available, selecting IOVA as PA mode.\n"); } } -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) /* Workaround for KNI which requires physical address to work * in kernels < 4.10 */ diff --git a/lib/librte_metrics/rte_metrics_telemetry.c b/lib/librte_metrics/rte_metrics_telemetry.c index 289ebae0b..b97152aeb 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.c +++ b/lib/librte_metrics/rte_metrics_telemetry.c @@ -6,7 +6,7 @@ #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <rte_telemetry_legacy.h> #endif @@ -529,7 +529,7 @@ RTE_LOG_REGISTER(metrics_log_level, lib.metrics, ERR); RTE_INIT(metrics_ctor) { -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY rte_telemetry_legacy_register("ports_all_stat_values", DATA_NOT_REQ, handle_ports_all_stats_values); rte_telemetry_legacy_register("global_stat_values", DATA_NOT_REQ, diff --git a/lib/librte_metrics/rte_metrics_telemetry.h b/lib/librte_metrics/rte_metrics_telemetry.h index 6c2391c56..3435a5542 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.h +++ b/lib/librte_metrics/rte_metrics_telemetry.h @@ -2,7 +2,7 @@ * Copyright(c) 2020 Intel Corporation */ -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <jansson.h> #else #define json_t void * diff --git a/lib/librte_port/meson.build b/lib/librte_port/meson.build index 9bbae28b7..609624c29 100644 --- a/lib/librte_port/meson.build +++ b/lib/librte_port/meson.build @@ -33,7 +33,7 @@ if dpdk_conf.has('RTE_PORT_PCAP') ext_deps += pcap_dep # dependency provided in config/meson.build endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') sources += files('rte_port_kni.c') headers += files('rte_port_kni.h') deps += 'kni' diff --git a/lib/meson.build b/lib/meson.build index 5f8177e1a..df4c1e334 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -73,7 +73,7 @@ foreach l:libraries ext_deps = [] deps = [] # eal is standard dependency once built - if dpdk_conf.has('RTE_LIBRTE_EAL') + if dpdk_conf.has('RTE_LIB_EAL') deps += ['eal'] endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros Bruce Richardson @ 2020-10-15 10:32 ` Luca Boccassi 0 siblings, 0 replies; 82+ messages in thread From: Luca Boccassi @ 2020-10-15 10:32 UTC (permalink / raw) To: Bruce Richardson, dev; +Cc: david.marchand, arybchenko, ferruh.yigit, thomas On Wed, 2020-10-14 at 15:13 +0100, Bruce Richardson wrote: > Use the newer macros defined by meson in all DPDK source code, to ensure > there are no errors when the old non-standard macros are removed. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > app/proc-info/main.c | 4 +- > app/test-bbdev/meson.build | 4 +- > app/test-bbdev/test_bbdev_perf.c | 8 +- > app/test-crypto-perf/cperf_ops.c | 6 +- > app/test-crypto-perf/cperf_options.h | 6 +- > app/test-crypto-perf/cperf_options_parsing.c | 16 +- > .../cperf_test_pmd_cyclecount.c | 2 +- > app/test-crypto-perf/cperf_test_throughput.c | 2 +- > app/test-crypto-perf/main.c | 6 +- > app/test-crypto-perf/meson.build | 2 +- > app/test-pipeline/main.c | 2 +- > app/test-pmd/bpf_cmd.h | 4 +- > app/test-pmd/cmdline.c | 190 +++++++++--------- > app/test-pmd/config.c | 18 +- > app/test-pmd/meson.build | 22 +- > app/test-pmd/parameters.c | 30 +-- > app/test-pmd/testpmd.c | 38 ++-- > app/test-pmd/testpmd.h | 4 +- > app/test/meson.build | 22 +- > app/test/process.h | 16 +- > app/test/test.c | 20 +- > app/test/test_cryptodev.c | 26 +-- > app/test/test_cryptodev_hash_test_vectors.h | 2 +- > app/test/test_eal_flags.c | 4 +- > app/test/test_func_reentrancy.c | 24 +-- > app/test/test_kni.c | 2 +- > app/test/test_mp_secondary.c | 12 +- > app/test/test_power.c | 2 +- > app/test/test_power_cpufreq.c | 2 +- > app/test/test_power_kvm_vm.c | 2 +- > app/test/test_table.c | 2 +- > app/test/test_table.h | 2 +- > app/test/test_table_combined.h | 2 +- > app/test/test_table_tables.h | 2 +- > config/arm/meson.build | 6 +- > drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- > drivers/compress/qat/qat_comp.h | 2 +- > drivers/compress/qat/qat_comp_pmd.h | 2 +- > .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- > drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- > drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- > drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- > drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- > drivers/crypto/qat/qat_sym.c | 2 +- > drivers/crypto/qat/qat_sym.h | 8 +- > drivers/crypto/qat/qat_sym_capabilities.h | 2 +- > drivers/crypto/qat/qat_sym_pmd.c | 12 +- > drivers/crypto/qat/qat_sym_pmd.h | 2 +- > drivers/crypto/qat/qat_sym_session.c | 4 +- > drivers/crypto/qat/qat_sym_session.h | 4 +- > drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- > drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- > drivers/net/ixgbe/ixgbe_flow.c | 6 +- > drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- > drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- > drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- > drivers/net/kni/meson.build | 2 +- > drivers/net/netvsc/meson.build | 2 +- > drivers/net/vhost/meson.build | 2 +- > drivers/raw/dpaa2_cmdif/meson.build | 2 +- > drivers/raw/dpaa2_qdma/meson.build | 2 +- > drivers/raw/ifpga/base/opae_osdep.h | 2 +- > drivers/vdpa/ifc/meson.build | 2 +- > examples/distributor/meson.build | 2 +- > examples/ethtool/lib/rte_ethtool.c | 4 +- > examples/ethtool/meson.build | 2 +- > examples/ioat/meson.build | 2 +- > examples/ip_pipeline/kni.c | 4 +- > examples/ip_pipeline/kni.h | 4 +- > examples/ip_pipeline/pipeline.c | 14 +- > examples/kni/meson.build | 2 +- > examples/l2fwd-crypto/main.c | 4 +- > examples/l2fwd-crypto/meson.build | 2 +- > examples/l3fwd-power/meson.build | 2 +- > examples/ntb/meson.build | 2 +- > examples/vhost_crypto/meson.build | 2 +- > examples/vm_power_manager/channel_monitor.c | 8 +- > .../vm_power_manager/guest_cli/meson.build | 2 +- > examples/vm_power_manager/main.c | 12 +- > examples/vm_power_manager/meson.build | 8 +- > lib/librte_eal/linux/eal.c | 4 +- > lib/librte_metrics/rte_metrics_telemetry.c | 4 +- > lib/librte_metrics/rte_metrics_telemetry.h | 2 +- > lib/librte_port/meson.build | 2 +- > lib/meson.build | 2 +- > 85 files changed, 389 insertions(+), 389 deletions(-) Acked-by: Luca Boccassi <bluca@debian.org> -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 0/8] Rework build macros 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (9 preceding siblings ...) 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 1/8] app: fix missing dependencies Bruce Richardson ` (7 more replies) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson 11 siblings, 8 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Following on from discussion in RFC v1 and v2 of this set, this version reworks the automated macros defined by meson to indicate if a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config. Advantages of this rework: * Much cleaner having standard macros * No need for defining the format of macros for each class * Shorter macros (for the most part) Disadvantages: * Potentially requires application changes * Inconsistency between the auto-defined macros and the other feature-set ones. --- v4: fixed errors when running test-null.sh flagged by CI v3: rebased to latest dropped RFC from title dropped 21.02 cleanup patch so whole patchset targets 20.11 Bruce Richardson (8): app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency build: add defines for compatibility with make build qat: build from common folder build: remove library name from version map filename devtools/test-null: load all drivers from directory build: standardize component names and defines build: replace use of old build macros app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 8 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 3 + app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 34 +++- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 29 +-- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 ++++++++++++ config/rte_config.h | 1 + devtools/test-null.sh | 2 +- doc/guides/rel_notes/deprecation.rst | 8 + ..._fpga_5gnr_fec_version.map => version.map} | 0 ...v_fpga_lte_fec_version.map => version.map} | 0 drivers/baseband/meson.build | 1 - ...pmd_bbdev_null_version.map => version.map} | 0 ...bbdev_turbo_sw_version.map => version.map} | 0 .../{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- ...{rte_bus_fslmc_version.map => version.map} | 0 ...{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/meson.build | 1 - .../{rte_bus_pci_version.map => version.map} | 0 .../{rte_bus_vdev_version.map => version.map} | 0 ...{rte_bus_vmbus_version.map => version.map} | 0 ...rte_common_cpt_version.map => version.map} | 0 ...e_common_dpaax_version.map => version.map} | 0 ...te_common_iavf_version.map => version.map} | 0 drivers/common/meson.build | 3 +- drivers/common/mlx5/meson.build | 1 - ...te_common_mlx5_version.map => version.map} | 0 ...te_common_mvep_version.map => version.map} | 0 ...ommon_octeontx_version.map => version.map} | 0 ...mmon_octeontx2_version.map => version.map} | 0 drivers/common/qat/meson.build | 68 ++++++- .../qat/version.map} | 0 ...common_sfc_efx_version.map => version.map} | 0 .../version.map} | 0 drivers/compress/meson.build | 5 +- drivers/compress/octeontx/meson.build | 2 +- .../version.map} | 0 drivers/compress/qat/meson.build | 17 -- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../{rte_pmd_zlib_version.map => version.map} | 0 ..._pmd_aesni_gcm_version.map => version.map} | 0 .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- ...e_pmd_aesni_mb_version.map => version.map} | 0 ...{rte_pmd_armv8_version.map => version.map} | 0 ...te_pmd_caam_jr_version.map => version.map} | 0 .../{rte_pmd_ccp_version.map => version.map} | 0 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- ..._pmd_dpaa2_sec_version.map => version.map} | 0 drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- ...e_pmd_dpaa_sec_version.map => version.map} | 0 ...rte_pmd_kasumi_version.map => version.map} | 0 drivers/crypto/meson.build | 4 +- ...{rte_pmd_mvsam_version.map => version.map} | 0 ...rte_pmd_nitrox_version.map => version.map} | 0 drivers/crypto/null/meson.build | 2 +- ...md_null_crypto_version.map => version.map} | 0 drivers/crypto/octeontx/meson.build | 2 +- ...cteontx_crypto_version.map => version.map} | 0 drivers/crypto/octeontx2/meson.build | 2 +- ...teontx2_crypto_version.map => version.map} | 0 ...te_pmd_openssl_version.map => version.map} | 0 drivers/crypto/qat/meson.build | 23 --- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/crypto/scheduler/meson.build | 2 +- ...ypto_scheduler_version.map => version.map} | 0 ...rte_pmd_snow3g_version.map => version.map} | 0 drivers/crypto/virtio/meson.build | 2 +- ..._virtio_crypto_version.map => version.map} | 0 .../{rte_pmd_zuc_version.map => version.map} | 0 drivers/event/dpaa/meson.build | 2 +- ...pmd_dpaa_event_version.map => version.map} | 0 drivers/event/dpaa2/meson.build | 2 +- ...md_dpaa2_event_version.map => version.map} | 0 ..._pmd_dsw_event_version.map => version.map} | 0 drivers/event/meson.build | 3 +- drivers/event/octeontx/meson.build | 2 +- ...octeontx_event_version.map => version.map} | 0 drivers/event/octeontx2/meson.build | 2 +- ...cteontx2_event_version.map => version.map} | 0 ...pmd_opdl_event_version.map => version.map} | 0 ...skeleton_event_version.map => version.map} | 0 ...e_pmd_sw_event_version.map => version.map} | 0 ...mempool_bucket_version.map => version.map} | 0 ...e_mempool_dpaa_version.map => version.map} | 0 ..._mempool_dpaa2_version.map => version.map} | 0 drivers/mempool/meson.build | 1 - ...mpool_octeontx_version.map => version.map} | 0 ...pool_octeontx2_version.map => version.map} | 0 ...e_mempool_ring_version.map => version.map} | 0 ..._mempool_stack_version.map => version.map} | 0 drivers/meson.build | 29 ++- ..._pmd_af_packet_version.map => version.map} | 0 ...rte_pmd_af_xdp_version.map => version.map} | 0 .../{rte_pmd_ark_version.map => version.map} | 0 ...e_pmd_atlantic_version.map => version.map} | 0 .../{rte_pmd_avp_version.map => version.map} | 0 ...{rte_pmd_axgbe_version.map => version.map} | 0 ...{rte_pmd_bnx2x_version.map => version.map} | 0 .../{rte_pmd_bnxt_version.map => version.map} | 0 .../{rte_pmd_bond_version.map => version.map} | 0 ...{rte_pmd_cxgbe_version.map => version.map} | 0 .../{rte_pmd_dpaa_version.map => version.map} | 0 ...{rte_pmd_dpaa2_version.map => version.map} | 0 ...{rte_pmd_e1000_version.map => version.map} | 0 .../{rte_pmd_ena_version.map => version.map} | 0 ...{rte_pmd_enetc_version.map => version.map} | 0 .../{rte_pmd_enic_version.map => version.map} | 0 ...e_pmd_failsafe_version.map => version.map} | 0 ...{rte_pmd_fm10k_version.map => version.map} | 0 ...{rte_pmd_hinic_version.map => version.map} | 0 .../{rte_pmd_hns3_version.map => version.map} | 0 .../{rte_pmd_i40e_version.map => version.map} | 0 .../{rte_pmd_iavf_version.map => version.map} | 0 .../{rte_pmd_ice_version.map => version.map} | 0 .../{rte_pmd_igc_version.map => version.map} | 0 ...{rte_pmd_ionic_version.map => version.map} | 0 ...rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- ...{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/meson.build | 2 +- .../{rte_pmd_kni_version.map => version.map} | 0 ...e_pmd_liquidio_version.map => version.map} | 0 ...{rte_pmd_memif_version.map => version.map} | 0 drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- .../{rte_pmd_mlx4_version.map => version.map} | 0 .../{rte_pmd_mlx5_version.map => version.map} | 0 ...rte_pmd_mvneta_version.map => version.map} | 0 ...{rte_pmd_mvpp2_version.map => version.map} | 0 drivers/net/netvsc/meson.build | 2 +- ...rte_pmd_netvsc_version.map => version.map} | 0 .../{rte_pmd_nfb_version.map => version.map} | 0 .../{rte_pmd_nfp_version.map => version.map} | 0 .../{rte_pmd_null_version.map => version.map} | 0 ...e_pmd_octeontx_version.map => version.map} | 0 ..._pmd_octeontx2_version.map => version.map} | 0 .../{rte_pmd_pcap_version.map => version.map} | 0 .../{rte_pmd_pfe_version.map => version.map} | 0 .../{rte_pmd_qede_version.map => version.map} | 0 .../{rte_pmd_ring_version.map => version.map} | 0 .../{rte_pmd_sfc_version.map => version.map} | 0 ...te_pmd_softnic_version.map => version.map} | 0 ...e_pmd_szedata2_version.map => version.map} | 0 .../{rte_pmd_tap_version.map => version.map} | 0 ...e_pmd_thunderx_version.map => version.map} | 0 ...md_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/meson.build | 2 +- ...{rte_pmd_vhost_version.map => version.map} | 0 ...rte_pmd_virtio_version.map => version.map} | 0 ...te_pmd_vmxnet3_version.map => version.map} | 0 drivers/raw/dpaa2_cmdif/meson.build | 2 +- ...ev_dpaa2_cmdif_version.map => version.map} | 0 drivers/raw/dpaa2_qdma/meson.build | 2 +- ...dev_dpaa2_qdma_version.map => version.map} | 0 drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/raw/ifpga/meson.build | 2 +- ...e_rawdev_ifpga_version.map => version.map} | 0 ...te_rawdev_ioat_version.map => version.map} | 0 drivers/raw/meson.build | 1 - ...rte_rawdev_ntb_version.map => version.map} | 0 ..._octeontx2_dma_version.map => version.map} | 0 ...v_octeontx2_ep_version.map => version.map} | 0 ...awdev_skeleton_version.map => version.map} | 0 drivers/regex/meson.build | 1 - ...pmd_mlx5_regex_version.map => version.map} | 0 ...cteontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/meson.build | 2 +- .../{rte_pmd_ifc_version.map => version.map} | 0 drivers/vdpa/meson.build | 1 - ..._pmd_mlx5_vdpa_version.map => version.map} | 0 examples/bond/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 4 +- examples/ioat/meson.build | 4 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 3 + examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 4 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 14 +- .../{rte_acl_version.map => version.map} | 0 .../{rte_bbdev_version.map => version.map} | 0 ...e_bitratestats_version.map => version.map} | 0 .../{rte_bpf_version.map => version.map} | 0 .../{rte_cfgfile_version.map => version.map} | 0 .../{rte_cmdline_version.map => version.map} | 0 ...te_compressdev_version.map => version.map} | 0 ...{rte_cryptodev_version.map => version.map} | 0 ...te_distributor_version.map => version.map} | 0 lib/librte_eal/linux/eal.c | 4 +- .../{rte_eal_version.map => version.map} | 0 .../{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/meson.build | 1 - .../{rte_ethdev_version.map => version.map} | 0 .../{rte_eventdev_version.map => version.map} | 0 .../{rte_fib_version.map => version.map} | 0 ..._flow_classify_version.map => version.map} | 0 lib/librte_graph/meson.build | 2 - .../{rte_graph_version.map => version.map} | 0 .../{rte_gro_version.map => version.map} | 0 .../{rte_gso_version.map => version.map} | 0 .../{rte_hash_version.map => version.map} | 0 .../{rte_ip_frag_version.map => version.map} | 0 .../{rte_ipsec_version.map => version.map} | 0 .../{rte_jobstats_version.map => version.map} | 0 .../{rte_kni_version.map => version.map} | 0 .../{rte_kvargs_version.map => version.map} | 0 ...e_latencystats_version.map => version.map} | 0 .../{rte_lpm_version.map => version.map} | 0 .../{rte_mbuf_version.map => version.map} | 0 .../{rte_member_version.map => version.map} | 0 .../{rte_mempool_version.map => version.map} | 0 .../{rte_meter_version.map => version.map} | 0 lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- .../{rte_metrics_version.map => version.map} | 0 .../{rte_net_version.map => version.map} | 0 .../{rte_node_version.map => version.map} | 0 .../{rte_pci_version.map => version.map} | 0 .../{rte_pdump_version.map => version.map} | 0 .../{rte_pipeline_version.map => version.map} | 0 lib/librte_port/meson.build | 2 +- .../{rte_port_version.map => version.map} | 0 .../{rte_power_version.map => version.map} | 0 .../{rte_rawdev_version.map => version.map} | 0 .../{rte_rcu_version.map => version.map} | 0 .../{rte_regexdev_version.map => version.map} | 0 .../{rte_reorder_version.map => version.map} | 0 .../{rte_rib_version.map => version.map} | 0 .../{rte_ring_version.map => version.map} | 0 .../{rte_sched_version.map => version.map} | 0 .../{rte_security_version.map => version.map} | 0 .../{rte_stack_version.map => version.map} | 0 .../{rte_table_version.map => version.map} | 0 ...{rte_telemetry_version.map => version.map} | 0 .../{rte_timer_version.map => version.map} | 0 .../{rte_vhost_version.map => version.map} | 0 lib/meson.build | 9 +- 292 files changed, 661 insertions(+), 493 deletions(-) create mode 100644 config/rte_compatibility_defines.h rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%) rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) delete mode 100644 drivers/crypto/qat/meson.build rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 1/8] app: fix missing dependencies 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson ` (6 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Keith Wiles, Luca Boccassi, Harry van Haaren A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build. Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 996ef1176111 ("app: add all remaining apps to meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test-crypto-perf/meson.build | 3 +++ app/test-pmd/meson.build | 12 ++++++++++++ 2 files changed, 15 insertions(+) diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index f394b75ba..4bd71510d 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,3 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index f52ab148f..0d9e45049 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -31,6 +31,18 @@ endif if dpdk_conf.has('RTE_LIBRTE_PDUMP') deps += 'pdump' endif +if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') + deps += 'bitratestats' +endif +if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') + deps += 'latencystats' +endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif +if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') + deps += 'pmd_bond' +endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') deps += 'pmd_bnxt' endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 2/8] examples/l2fwd-crypto: fix missing dependency 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 1/8] app: fix missing dependencies Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 3/8] build: add defines for compatibility with make build Bruce Richardson ` (5 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Declan Doherty When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build. Fixes: 89f0711f9ddf ("examples: build some samples with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/l2fwd-crypto/meson.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 6c852ad19..39e1604fa 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,6 +7,9 @@ # DPDK instance, use 'make' deps += 'cryptodev' +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif allow_experimental_apis = true sources = files( 'main.c' -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 3/8] build: add defines for compatibility with make build 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 1/8] app: fix missing dependencies Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 4/8] qat: build from common folder Bruce Richardson ` (4 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Fiona Trahe, Ashish Gupta, Luca Boccassi, Harry van Haaren, Keith Wiles, Pablo de Lara, Lee Daly The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases. As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions. For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson. Fixes: 5b9656b157d3 ("lib: build with meson") Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") Fixes: dcadbbde8e61 ("crypto/null: build with meson") Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/test/meson.build | 1 + config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ config/rte_config.h | 1 + drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 ++++ 8 files changed, 151 insertions(+), 4 deletions(-) create mode 100644 config/rte_compatibility_defines.h diff --git a/app/test/meson.build b/app/test/meson.build index dedf29dd7..fc90a1909 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -415,6 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' + test_deps += 'pmd_crypto_scheduler' endif foreach d:test_deps diff --git a/config/meson.build b/config/meson.build index d0e593226..89bffc85a 100644 --- a/config/meson.build +++ b/config/meson.build @@ -253,7 +253,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers('rte_config.h', subdir: get_option('include_subdir_arch')) +install_headers(['rte_config.h', 'rte_compatibility_defines.h'], + subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS dpdk_conf.set('RTE_EAL_VFIO', is_linux) diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h new file mode 100644 index 000000000..47600052b --- /dev/null +++ b/config/rte_compatibility_defines.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2017 Intel Corporation + */ + +#ifndef _RTE_CONFIG_H_ +#error "This file should only be included via rte_config.h" +#endif + +/* + * NOTE: these defines are for compatibility only and will be removed in a + * future DPDK release. + */ + +#ifdef RTE_LIBRTE_BITRATESTATS +#define RTE_LIBRTE_BITRATE +#endif + +#ifdef RTE_LIBRTE_LATENCYSTATS +#define RTE_LIBRTE_LATENCY_STATS +#endif + +#ifdef RTE_LIBRTE_DPAAX_COMMON +#define RTE_LIBRTE_COMMON_DPAAX +#endif + +#ifdef RTE_LIBRTE_VMBUS_BUS +#define RTE_LIBRTE_VMBUS +#endif + +#ifdef RTE_LIBRTE_BUCKET_MEMPOOL +#define RTE_DRIVER_MEMPOOL_BUCKET +#endif + +#ifdef RTE_LIBRTE_RING_MEMPOOL +#define RTE_DRIVER_MEMPOOL_RING +#endif + +#ifdef RTE_LIBRTE_STACK_MEMPOOL +#define RTE_DRIVER_MEMPOOL_STACK +#endif + +#ifdef RTE_LIBRTE_AF_PACKET_PMD +#define RTE_LIBRTE_PMD_AF_PACKET +#endif + +#ifdef RTE_LIBRTE_AF_XDP_PMD +#define RTE_LIBRTE_PMD_AF_XDP +#endif + +#ifdef RTE_LIBRTE_BOND_PMD +#define RTE_LIBRTE_PMD_BOND +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_EM_PMD +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_IGB_PMD +#endif + +#ifdef RTE_LIBRTE_FAILSAFE_PMD +#define RTE_LIBRTE_PMD_FAILSAFE +#endif + +#ifdef RTE_LIBRTE_KNI_PMD +#define RTE_LIBRTE_PMD_KNI +#endif + +#ifdef RTE_LIBRTE_LIQUIDIO_PMD +#define RTE_LIBRTE_LIO_PMD +#endif + +#ifdef RTE_LIBRTE_MEMIF_PMD +#define RTE_LIBRTE_PMD_MEMIF +#endif + +#ifdef RTE_LIBRTE_NULL_PMD +#define RTE_LIBRTE_PMD_NULL +#endif + +#ifdef RTE_LIBRTE_PCAP_PMD +#define RTE_LIBRTE_PMD_PCAP +#endif + +#ifdef RTE_LIBRTE_RING_PMD +#define RTE_LIBRTE_PMD_RING +#endif + +#ifdef RTE_LIBRTE_SFC_PMD +#define RTE_LIBRTE_SFC_EFX_PMD +#endif + +#ifdef RTE_LIBRTE_SOFTNIC_PMD +#define RTE_LIBRTE_PMD_SOFTNIC +#endif + +#ifdef RTE_LIBRTE_SZEDATA2_PMD +#define RTE_LIBRTE_PMD_SZEDATA2 +#endif + +#ifdef RTE_LIBRTE_TAP_PMD +#define RTE_LIBRTE_PMD_TAP +#endif + +#ifdef RTE_LIBRTE_THUNDERX_PMD +#define RTE_LIBRTE_THUNDERX_NICVF_PMD +#endif + +#ifdef RTE_LIBRTE_VHOST_PMD +#define RTE_LIBRTE_PMD_VHOST +#endif + +#ifdef RTE_LIBRTE_PMD_ARMV8 +#define RTE_LIBRTE_PMD_ARMV8_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_MVSAM +#define RTE_LIBRTE_PMD_MVSAM_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS +#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV +#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF +#endif + diff --git a/config/rte_config.h b/config/rte_config.h index 03d90d78b..1bebab335 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,6 +13,7 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> +#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index ee883c3f9..bea1720a0 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,5 +8,5 @@ endif drivers = ['isal', 'octeontx', 'qat', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index a2423507a..25b99c19c 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,5 +26,5 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/event/meson.build b/drivers/event/meson.build index ebe76a75c..f2a343147 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/meson.build b/drivers/meson.build index 5f9526557..b5ac483d3 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -117,6 +117,21 @@ foreach subpath:subdirs fmt_name = name endif dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + # for driver compatibility, since we changed the + # default to match that of make. Remove in future release + # after following deprecation process + if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' + or class == 'compress' + or class == 'event') + alt_flag_fmt = '_@0@_PMD'.join( + config_flag_fmt.split('_PMD_@0@')) + if config_flag_fmt.contains('EVENTDEV') + alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( + config_flag_fmt.split('_PMD_@0@_EVENTDEV')) + endif + dpdk_conf.set(alt_flag_fmt.format( + fmt_name.to_upper()), 1) + endif lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 4/8] qat: build from common folder 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson ` (2 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 3/8] build: add defines for compatibility with make build Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename Bruce Richardson ` (3 subsequent siblings) 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, John Griffin, Fiona Trahe, Deepak Kumar Jain, Ray Kinsella, Neil Horman, Ashish Gupta Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders. This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- drivers/common/meson.build | 2 +- drivers/common/qat/meson.build | 69 ++++++++++++++++--- .../qat/rte_common_qat_version.map} | 0 drivers/compress/meson.build | 2 +- drivers/compress/qat/meson.build | 17 ----- drivers/crypto/meson.build | 1 - drivers/crypto/qat/meson.build | 23 ------- drivers/meson.build | 1 + 8 files changed, 63 insertions(+), 52 deletions(-) rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build delete mode 100644 drivers/crypto/qat/meson.build diff --git a/drivers/common/meson.build b/drivers/common/meson.build index 7ac1ca73a..abb4f1529 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -6,6 +6,6 @@ if is_windows endif std_deps = ['eal'] -drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx'] +drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 8de249289..3409162d0 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -1,15 +1,66 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2018 Intel Corporation -# This does not build a driver, but instead holds common files for -# the crypto and compression drivers. -build = false -reason = '' # sentinal value to suppress printout -qat_deps = ['bus_pci'] -qat_sources = files('qat_common.c', +config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' +driver_name_fmt = 'rte_common_@0@' + +qat_crypto = true +qat_crypto_path = 'crypto/qat' +qat_crypto_relpath = '../../' + qat_crypto_path +qat_compress = true +qat_compress_path = 'compress/qat' +qat_compress_relpath = '../../' + qat_compress_path + +if disabled_drivers.contains(qat_crypto_path) + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif +if disabled_drivers.contains(qat_compress_path) + qat_compress = false + dpdk_drvs_disabled += qat_compress_path + set_variable(qat_compress_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif + +libcrypto = dependency('libcrypto', required: false) +if qat_crypto and not libcrypto.found() + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'missing dependency, libcrypto') +endif + +# The driver should not build if both compression and crypto are disabled +#FIXME common code depends on compression files so check only compress! +if not qat_compress # and not qat_crypto + build = false + reason = '' # rely on reason for compress/crypto above + subdir_done() +endif + +deps += ['bus_pci', 'cryptodev', 'net', 'compressdev'] +sources += files('qat_common.c', 'qat_qp.c', 'qat_device.c', 'qat_logs.c') -qat_includes = [include_directories('.', 'qat_adf')] -qat_ext_deps = [] -qat_cflags = [] +includes += include_directories('qat_adf', + qat_crypto_relpath, + qat_compress_relpath) + +if qat_compress + foreach f: ['qat_comp_pmd.c', 'qat_comp.c'] + sources += files(join_paths(qat_compress_relpath, f)) + endforeach +endif + +if qat_crypto + foreach f: ['qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c', + 'qat_asym_pmd.c', 'qat_asym.c'] + sources += files(join_paths(qat_crypto_relpath, f)) + endforeach + deps += ['security'] + ext_deps += libcrypto + cflags += ['-DBUILD_QAT_SYM', '-DBUILD_QAT_ASYM'] +endif diff --git a/drivers/compress/qat/rte_pmd_qat_version.map b/drivers/common/qat/rte_common_qat_version.map similarity index 100% rename from drivers/compress/qat/rte_pmd_qat_version.map rename to drivers/common/qat/rte_common_qat_version.map diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index bea1720a0..3a4723c0c 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -5,7 +5,7 @@ if is_windows subdir_done() endif -drivers = ['isal', 'octeontx', 'qat', 'zlib'] +drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/compress/qat/meson.build b/drivers/compress/qat/meson.build deleted file mode 100644 index a00246980..000000000 --- a/drivers/compress/qat/meson.build +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - - -# Add our sources files to the list -qat_sources += files('qat_comp_pmd.c', - 'qat_comp.c') -qat_includes += include_directories('.') -qat_deps += 'compressdev' -qat_ext_deps += dep - -# build the whole driver -sources += qat_sources -cflags += qat_cflags -deps += qat_deps -ext_deps += qat_ext_deps -includes += qat_includes diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 25b99c19c..bd7a940e6 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -19,7 +19,6 @@ drivers = ['aesni_gcm', 'octeontx', 'octeontx2', 'openssl', - 'qat', 'scheduler', 'snow3g', 'virtio', diff --git a/drivers/crypto/qat/meson.build b/drivers/crypto/qat/meson.build deleted file mode 100644 index a225f374a..000000000 --- a/drivers/crypto/qat/meson.build +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - -# this does not build the QAT driver, instead that is done in the compression -# driver which comes later. Here we just add our sources files to the list -build = false -reason = '' # sentinal value to suppress printout -dep = dependency('libcrypto', required: false) -qat_includes += include_directories('.') -qat_deps += 'cryptodev' -qat_deps += 'net' -qat_deps += 'security' -if dep.found() - # Add our sources files to the list - qat_sources += files('qat_sym_pmd.c', - 'qat_sym.c', - 'qat_sym_session.c', - 'qat_asym_pmd.c', - 'qat_asym.c') - qat_ext_deps += dep - qat_cflags += '-DBUILD_QAT_SYM' - qat_cflags += '-DBUILD_QAT_ASYM' -endif diff --git a/drivers/meson.build b/drivers/meson.build index b5ac483d3..b95b00583 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -6,6 +6,7 @@ subdirs = [ 'common', 'bus', 'common/mlx5', # depends on bus. + 'common/qat', # depends on bus. 'mempool', # depends on common and bus. 'net', # depends on common, bus, mempool 'raw', # depends on common, bus and net. -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson ` (3 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 4/8] qat: build from common folder Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-18 11:56 ` Xu, Rosen 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 6/8] devtools/test-null: load all drivers from directory Bruce Richardson ` (2 subsequent siblings) 7 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Ray Kinsella, Neil Horman, Nicolas Chautru, Hemant Agrawal, Sachin Saxena, Rosen Xu, Stephen Hemminger, Long Li, Anoob Joseph, Jingjing Wu, Beilei Xing, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, Fiona Trahe, John Griffin, Deepak Kumar Jain, Andrew Rybchenko, Lee Daly, Ashish Gupta, Sunila Sahu, Declan Doherty, Pablo de Lara, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Fan Zhang, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Liang Ma, Peter Mccarthy, Harry van Haaren, Artem V. Andreev, Olivier Matz, Gage Eads, John W. Linville, Ciara Loftus, Qi Zhang, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Jeff Guo, Haiyue Wang, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Xiao Wang, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Qiming Yang, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Jasvinder Singh, Cristian Dumitrescu, Keith Wiles, Maciej Czekaj, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Yong Wang, Tianfei zhang, Xiaoyun Li, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Konstantin Ananyev, David Hunt, Byron Marohn, Yipeng Wang, Vladimir Medvedkin, Bernard Iremonger, Jiayu Hu, Sameh Gobriel, Reshma Pattan, Honnappa Nagarahalli, Kevin Laatz, Robert Sanford, Erik Gabriel Carrillo Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} | 0 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} | 0 .../null/{rte_pmd_bbdev_null_version.map => version.map} | 0 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map} | 0 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} | 0 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/pci/{rte_bus_pci_version.map => version.map} | 0 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} | 0 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} | 0 .../common/cpt/{rte_common_cpt_version.map => version.map} | 0 .../dpaax/{rte_common_dpaax_version.map => version.map} | 0 .../common/iavf/{rte_common_iavf_version.map => version.map} | 0 .../common/mlx5/{rte_common_mlx5_version.map => version.map} | 0 .../common/mvep/{rte_common_mvep_version.map => version.map} | 0 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0 .../{rte_common_octeontx2_version.map => version.map} | 0 .../common/qat/{rte_common_qat_version.map => version.map} | 0 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map} | 0 .../compress/isal/{rte_pmd_isal_version.map => version.map} | 0 .../{rte_pmd_octeontx_compress_version.map => version.map} | 0 .../compress/zlib/{rte_pmd_zlib_version.map => version.map} | 0 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} | 0 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} | 0 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map} | 0 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map} | 0 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} | 0 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} | 0 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} | 0 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} | 0 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0 .../null/{rte_pmd_null_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx2_crypto_version.map => version.map} | 0 .../openssl/{rte_pmd_openssl_version.map => version.map} | 0 .../{rte_pmd_crypto_scheduler_version.map => version.map} | 0 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} | 0 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map} | 0 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} | 0 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map} | 0 .../{rte_pmd_octeontx_event_version.map => version.map} | 0 .../{rte_pmd_octeontx2_event_version.map => version.map} | 0 .../opdl/{rte_pmd_opdl_event_version.map => version.map} | 0 .../{rte_pmd_skeleton_event_version.map => version.map} | 0 .../event/sw/{rte_pmd_sw_event_version.map => version.map} | 0 .../bucket/{rte_mempool_bucket_version.map => version.map} | 0 .../dpaa/{rte_mempool_dpaa_version.map => version.map} | 0 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map} | 0 .../{rte_mempool_octeontx_version.map => version.map} | 0 .../{rte_mempool_octeontx2_version.map => version.map} | 0 .../ring/{rte_mempool_ring_version.map => version.map} | 0 .../stack/{rte_mempool_stack_version.map => version.map} | 0 drivers/meson.build | 4 ++-- .../af_packet/{rte_pmd_af_packet_version.map => version.map} | 0 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} | 0 drivers/net/ark/{rte_pmd_ark_version.map => version.map} | 0 .../atlantic/{rte_pmd_atlantic_version.map => version.map} | 0 drivers/net/avp/{rte_pmd_avp_version.map => version.map} | 0 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} | 0 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} | 0 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} | 0 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} | 0 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} | 0 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} | 0 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} | 0 drivers/net/ena/{rte_pmd_ena_version.map => version.map} | 0 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} | 0 drivers/net/enic/{rte_pmd_enic_version.map => version.map} | 0 .../failsafe/{rte_pmd_failsafe_version.map => version.map} | 0 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} | 0 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} | 0 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} | 0 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} | 0 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} | 0 drivers/net/ice/{rte_pmd_ice_version.map => version.map} | 0 drivers/net/igc/{rte_pmd_igc_version.map => version.map} | 0 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} | 0 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/{rte_pmd_kni_version.map => version.map} | 0 .../liquidio/{rte_pmd_liquidio_version.map => version.map} | 0 drivers/net/memif/{rte_pmd_memif_version.map => version.map} | 0 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} | 0 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} | 0 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map} | 0 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} | 0 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map} | 0 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} | 0 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} | 0 drivers/net/null/{rte_pmd_null_version.map => version.map} | 0 .../octeontx/{rte_pmd_octeontx_version.map => version.map} | 0 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map} | 0 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} | 0 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} | 0 drivers/net/qede/{rte_pmd_qede_version.map => version.map} | 0 drivers/net/ring/{rte_pmd_ring_version.map => version.map} | 0 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} | 0 .../net/softnic/{rte_pmd_softnic_version.map => version.map} | 0 .../szedata2/{rte_pmd_szedata2_version.map => version.map} | 0 drivers/net/tap/{rte_pmd_tap_version.map => version.map} | 0 .../thunderx/{rte_pmd_thunderx_version.map => version.map} | 0 .../{rte_pmd_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} | 0 .../net/virtio/{rte_pmd_virtio_version.map => version.map} | 0 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_qdma_version.map => version.map} | 0 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} | 0 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_dma_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_ep_version.map => version.map} | 0 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map} | 0 .../{rte_pmd_octeontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} | 0 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} | 0 lib/librte_acl/{rte_acl_version.map => version.map} | 0 lib/librte_bbdev/{rte_bbdev_version.map => version.map} | 0 .../{rte_bitratestats_version.map => version.map} | 0 lib/librte_bpf/{rte_bpf_version.map => version.map} | 0 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} | 0 lib/librte_cmdline/{rte_cmdline_version.map => version.map} | 0 .../{rte_compressdev_version.map => version.map} | 0 .../{rte_cryptodev_version.map => version.map} | 0 .../{rte_distributor_version.map => version.map} | 0 lib/librte_eal/{rte_eal_version.map => version.map} | 0 lib/librte_efd/{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/{rte_ethdev_version.map => version.map} | 0 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0 lib/librte_fib/{rte_fib_version.map => version.map} | 0 .../{rte_flow_classify_version.map => version.map} | 0 lib/librte_graph/{rte_graph_version.map => version.map} | 0 lib/librte_gro/{rte_gro_version.map => version.map} | 0 lib/librte_gso/{rte_gso_version.map => version.map} | 0 lib/librte_hash/{rte_hash_version.map => version.map} | 0 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} | 0 lib/librte_ipsec/{rte_ipsec_version.map => version.map} | 0 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0 lib/librte_kni/{rte_kni_version.map => version.map} | 0 lib/librte_kvargs/{rte_kvargs_version.map => version.map} | 0 .../{rte_latencystats_version.map => version.map} | 0 lib/librte_lpm/{rte_lpm_version.map => version.map} | 0 lib/librte_mbuf/{rte_mbuf_version.map => version.map} | 0 lib/librte_member/{rte_member_version.map => version.map} | 0 lib/librte_mempool/{rte_mempool_version.map => version.map} | 0 lib/librte_meter/{rte_meter_version.map => version.map} | 0 lib/librte_metrics/{rte_metrics_version.map => version.map} | 0 lib/librte_net/{rte_net_version.map => version.map} | 0 lib/librte_node/{rte_node_version.map => version.map} | 0 lib/librte_pci/{rte_pci_version.map => version.map} | 0 lib/librte_pdump/{rte_pdump_version.map => version.map} | 0 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0 lib/librte_port/{rte_port_version.map => version.map} | 0 lib/librte_power/{rte_power_version.map => version.map} | 0 lib/librte_rawdev/{rte_rawdev_version.map => version.map} | 0 lib/librte_rcu/{rte_rcu_version.map => version.map} | 0 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0 lib/librte_reorder/{rte_reorder_version.map => version.map} | 0 lib/librte_rib/{rte_rib_version.map => version.map} | 0 lib/librte_ring/{rte_ring_version.map => version.map} | 0 lib/librte_sched/{rte_sched_version.map => version.map} | 0 lib/librte_security/{rte_security_version.map => version.map} | 0 lib/librte_stack/{rte_stack_version.map => version.map} | 0 lib/librte_table/{rte_table_version.map => version.map} | 0 .../{rte_telemetry_version.map => version.map} | 0 lib/librte_timer/{rte_timer_version.map => version.map} | 0 lib/librte_vhost/{rte_vhost_version.map => version.map} | 0 lib/meson.build | 4 ++-- 173 files changed, 4 insertions(+), 4 deletions(-) rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%) rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%) rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/version.map similarity index 100% rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map rename to drivers/baseband/fpga_5gnr_fec/version.map diff --git a/drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map b/drivers/baseband/fpga_lte_fec/version.map similarity index 100% rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map rename to drivers/baseband/fpga_lte_fec/version.map diff --git a/drivers/baseband/null/rte_pmd_bbdev_null_version.map b/drivers/baseband/null/version.map similarity index 100% rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map rename to drivers/baseband/null/version.map diff --git a/drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map b/drivers/baseband/turbo_sw/version.map similarity index 100% rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map rename to drivers/baseband/turbo_sw/version.map diff --git a/drivers/bus/dpaa/rte_bus_dpaa_version.map b/drivers/bus/dpaa/version.map similarity index 100% rename from drivers/bus/dpaa/rte_bus_dpaa_version.map rename to drivers/bus/dpaa/version.map diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/version.map similarity index 100% rename from drivers/bus/fslmc/rte_bus_fslmc_version.map rename to drivers/bus/fslmc/version.map diff --git a/drivers/bus/ifpga/rte_bus_ifpga_version.map b/drivers/bus/ifpga/version.map similarity index 100% rename from drivers/bus/ifpga/rte_bus_ifpga_version.map rename to drivers/bus/ifpga/version.map diff --git a/drivers/bus/pci/rte_bus_pci_version.map b/drivers/bus/pci/version.map similarity index 100% rename from drivers/bus/pci/rte_bus_pci_version.map rename to drivers/bus/pci/version.map diff --git a/drivers/bus/vdev/rte_bus_vdev_version.map b/drivers/bus/vdev/version.map similarity index 100% rename from drivers/bus/vdev/rte_bus_vdev_version.map rename to drivers/bus/vdev/version.map diff --git a/drivers/bus/vmbus/rte_bus_vmbus_version.map b/drivers/bus/vmbus/version.map similarity index 100% rename from drivers/bus/vmbus/rte_bus_vmbus_version.map rename to drivers/bus/vmbus/version.map diff --git a/drivers/common/cpt/rte_common_cpt_version.map b/drivers/common/cpt/version.map similarity index 100% rename from drivers/common/cpt/rte_common_cpt_version.map rename to drivers/common/cpt/version.map diff --git a/drivers/common/dpaax/rte_common_dpaax_version.map b/drivers/common/dpaax/version.map similarity index 100% rename from drivers/common/dpaax/rte_common_dpaax_version.map rename to drivers/common/dpaax/version.map diff --git a/drivers/common/iavf/rte_common_iavf_version.map b/drivers/common/iavf/version.map similarity index 100% rename from drivers/common/iavf/rte_common_iavf_version.map rename to drivers/common/iavf/version.map diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map b/drivers/common/mlx5/version.map similarity index 100% rename from drivers/common/mlx5/rte_common_mlx5_version.map rename to drivers/common/mlx5/version.map diff --git a/drivers/common/mvep/rte_common_mvep_version.map b/drivers/common/mvep/version.map similarity index 100% rename from drivers/common/mvep/rte_common_mvep_version.map rename to drivers/common/mvep/version.map diff --git a/drivers/common/octeontx/rte_common_octeontx_version.map b/drivers/common/octeontx/version.map similarity index 100% rename from drivers/common/octeontx/rte_common_octeontx_version.map rename to drivers/common/octeontx/version.map diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/version.map similarity index 100% rename from drivers/common/octeontx2/rte_common_octeontx2_version.map rename to drivers/common/octeontx2/version.map diff --git a/drivers/common/qat/rte_common_qat_version.map b/drivers/common/qat/version.map similarity index 100% rename from drivers/common/qat/rte_common_qat_version.map rename to drivers/common/qat/version.map diff --git a/drivers/common/sfc_efx/rte_common_sfc_efx_version.map b/drivers/common/sfc_efx/version.map similarity index 100% rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map rename to drivers/common/sfc_efx/version.map diff --git a/drivers/compress/isal/rte_pmd_isal_version.map b/drivers/compress/isal/version.map similarity index 100% rename from drivers/compress/isal/rte_pmd_isal_version.map rename to drivers/compress/isal/version.map diff --git a/drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map b/drivers/compress/octeontx/version.map similarity index 100% rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map rename to drivers/compress/octeontx/version.map diff --git a/drivers/compress/zlib/rte_pmd_zlib_version.map b/drivers/compress/zlib/version.map similarity index 100% rename from drivers/compress/zlib/rte_pmd_zlib_version.map rename to drivers/compress/zlib/version.map diff --git a/drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map b/drivers/crypto/aesni_gcm/version.map similarity index 100% rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map rename to drivers/crypto/aesni_gcm/version.map diff --git a/drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map b/drivers/crypto/aesni_mb/version.map similarity index 100% rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map rename to drivers/crypto/aesni_mb/version.map diff --git a/drivers/crypto/armv8/rte_pmd_armv8_version.map b/drivers/crypto/armv8/version.map similarity index 100% rename from drivers/crypto/armv8/rte_pmd_armv8_version.map rename to drivers/crypto/armv8/version.map diff --git a/drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map b/drivers/crypto/caam_jr/version.map similarity index 100% rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map rename to drivers/crypto/caam_jr/version.map diff --git a/drivers/crypto/ccp/rte_pmd_ccp_version.map b/drivers/crypto/ccp/version.map similarity index 100% rename from drivers/crypto/ccp/rte_pmd_ccp_version.map rename to drivers/crypto/ccp/version.map diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/version.map similarity index 100% rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map rename to drivers/crypto/dpaa2_sec/version.map diff --git a/drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map b/drivers/crypto/dpaa_sec/version.map similarity index 100% rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map rename to drivers/crypto/dpaa_sec/version.map diff --git a/drivers/crypto/kasumi/rte_pmd_kasumi_version.map b/drivers/crypto/kasumi/version.map similarity index 100% rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map rename to drivers/crypto/kasumi/version.map diff --git a/drivers/crypto/mvsam/rte_pmd_mvsam_version.map b/drivers/crypto/mvsam/version.map similarity index 100% rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map rename to drivers/crypto/mvsam/version.map diff --git a/drivers/crypto/nitrox/rte_pmd_nitrox_version.map b/drivers/crypto/nitrox/version.map similarity index 100% rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map rename to drivers/crypto/nitrox/version.map diff --git a/drivers/crypto/null/rte_pmd_null_crypto_version.map b/drivers/crypto/null/version.map similarity index 100% rename from drivers/crypto/null/rte_pmd_null_crypto_version.map rename to drivers/crypto/null/version.map diff --git a/drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map b/drivers/crypto/octeontx/version.map similarity index 100% rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map rename to drivers/crypto/octeontx/version.map diff --git a/drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map b/drivers/crypto/octeontx2/version.map similarity index 100% rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map rename to drivers/crypto/octeontx2/version.map diff --git a/drivers/crypto/openssl/rte_pmd_openssl_version.map b/drivers/crypto/openssl/version.map similarity index 100% rename from drivers/crypto/openssl/rte_pmd_openssl_version.map rename to drivers/crypto/openssl/version.map diff --git a/drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map b/drivers/crypto/scheduler/version.map similarity index 100% rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map rename to drivers/crypto/scheduler/version.map diff --git a/drivers/crypto/snow3g/rte_pmd_snow3g_version.map b/drivers/crypto/snow3g/version.map similarity index 100% rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map rename to drivers/crypto/snow3g/version.map diff --git a/drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map b/drivers/crypto/virtio/version.map similarity index 100% rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map rename to drivers/crypto/virtio/version.map diff --git a/drivers/crypto/zuc/rte_pmd_zuc_version.map b/drivers/crypto/zuc/version.map similarity index 100% rename from drivers/crypto/zuc/rte_pmd_zuc_version.map rename to drivers/crypto/zuc/version.map diff --git a/drivers/event/dpaa/rte_pmd_dpaa_event_version.map b/drivers/event/dpaa/version.map similarity index 100% rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map rename to drivers/event/dpaa/version.map diff --git a/drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map b/drivers/event/dpaa2/version.map similarity index 100% rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map rename to drivers/event/dpaa2/version.map diff --git a/drivers/event/dsw/rte_pmd_dsw_event_version.map b/drivers/event/dsw/version.map similarity index 100% rename from drivers/event/dsw/rte_pmd_dsw_event_version.map rename to drivers/event/dsw/version.map diff --git a/drivers/event/octeontx/rte_pmd_octeontx_event_version.map b/drivers/event/octeontx/version.map similarity index 100% rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map rename to drivers/event/octeontx/version.map diff --git a/drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map b/drivers/event/octeontx2/version.map similarity index 100% rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map rename to drivers/event/octeontx2/version.map diff --git a/drivers/event/opdl/rte_pmd_opdl_event_version.map b/drivers/event/opdl/version.map similarity index 100% rename from drivers/event/opdl/rte_pmd_opdl_event_version.map rename to drivers/event/opdl/version.map diff --git a/drivers/event/skeleton/rte_pmd_skeleton_event_version.map b/drivers/event/skeleton/version.map similarity index 100% rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map rename to drivers/event/skeleton/version.map diff --git a/drivers/event/sw/rte_pmd_sw_event_version.map b/drivers/event/sw/version.map similarity index 100% rename from drivers/event/sw/rte_pmd_sw_event_version.map rename to drivers/event/sw/version.map diff --git a/drivers/mempool/bucket/rte_mempool_bucket_version.map b/drivers/mempool/bucket/version.map similarity index 100% rename from drivers/mempool/bucket/rte_mempool_bucket_version.map rename to drivers/mempool/bucket/version.map diff --git a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map b/drivers/mempool/dpaa/version.map similarity index 100% rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map rename to drivers/mempool/dpaa/version.map diff --git a/drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map b/drivers/mempool/dpaa2/version.map similarity index 100% rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map rename to drivers/mempool/dpaa2/version.map diff --git a/drivers/mempool/octeontx/rte_mempool_octeontx_version.map b/drivers/mempool/octeontx/version.map similarity index 100% rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map rename to drivers/mempool/octeontx/version.map diff --git a/drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map b/drivers/mempool/octeontx2/version.map similarity index 100% rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map rename to drivers/mempool/octeontx2/version.map diff --git a/drivers/mempool/ring/rte_mempool_ring_version.map b/drivers/mempool/ring/version.map similarity index 100% rename from drivers/mempool/ring/rte_mempool_ring_version.map rename to drivers/mempool/ring/version.map diff --git a/drivers/mempool/stack/rte_mempool_stack_version.map b/drivers/mempool/stack/version.map similarity index 100% rename from drivers/mempool/stack/rte_mempool_stack_version.map rename to drivers/mempool/stack/version.map diff --git a/drivers/meson.build b/drivers/meson.build index b95b00583..3d4bbff13 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -166,9 +166,9 @@ foreach subpath:subdirs install: true) # now build the shared driver - version_map = '@0@/@1@/@2@_version.map'.format( + version_map = '@0@/@1@/version.map'.format( meson.current_source_dir(), - drv_path, lib_name) + drv_path) implib = 'lib' + lib_name + '.dll.a' def_file = custom_target(lib_name + '_def', diff --git a/drivers/net/af_packet/rte_pmd_af_packet_version.map b/drivers/net/af_packet/version.map similarity index 100% rename from drivers/net/af_packet/rte_pmd_af_packet_version.map rename to drivers/net/af_packet/version.map diff --git a/drivers/net/af_xdp/rte_pmd_af_xdp_version.map b/drivers/net/af_xdp/version.map similarity index 100% rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map rename to drivers/net/af_xdp/version.map diff --git a/drivers/net/ark/rte_pmd_ark_version.map b/drivers/net/ark/version.map similarity index 100% rename from drivers/net/ark/rte_pmd_ark_version.map rename to drivers/net/ark/version.map diff --git a/drivers/net/atlantic/rte_pmd_atlantic_version.map b/drivers/net/atlantic/version.map similarity index 100% rename from drivers/net/atlantic/rte_pmd_atlantic_version.map rename to drivers/net/atlantic/version.map diff --git a/drivers/net/avp/rte_pmd_avp_version.map b/drivers/net/avp/version.map similarity index 100% rename from drivers/net/avp/rte_pmd_avp_version.map rename to drivers/net/avp/version.map diff --git a/drivers/net/axgbe/rte_pmd_axgbe_version.map b/drivers/net/axgbe/version.map similarity index 100% rename from drivers/net/axgbe/rte_pmd_axgbe_version.map rename to drivers/net/axgbe/version.map diff --git a/drivers/net/bnx2x/rte_pmd_bnx2x_version.map b/drivers/net/bnx2x/version.map similarity index 100% rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map rename to drivers/net/bnx2x/version.map diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/version.map similarity index 100% rename from drivers/net/bnxt/rte_pmd_bnxt_version.map rename to drivers/net/bnxt/version.map diff --git a/drivers/net/bonding/rte_pmd_bond_version.map b/drivers/net/bonding/version.map similarity index 100% rename from drivers/net/bonding/rte_pmd_bond_version.map rename to drivers/net/bonding/version.map diff --git a/drivers/net/cxgbe/rte_pmd_cxgbe_version.map b/drivers/net/cxgbe/version.map similarity index 100% rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map rename to drivers/net/cxgbe/version.map diff --git a/drivers/net/dpaa/rte_pmd_dpaa_version.map b/drivers/net/dpaa/version.map similarity index 100% rename from drivers/net/dpaa/rte_pmd_dpaa_version.map rename to drivers/net/dpaa/version.map diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map b/drivers/net/dpaa2/version.map similarity index 100% rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map rename to drivers/net/dpaa2/version.map diff --git a/drivers/net/e1000/rte_pmd_e1000_version.map b/drivers/net/e1000/version.map similarity index 100% rename from drivers/net/e1000/rte_pmd_e1000_version.map rename to drivers/net/e1000/version.map diff --git a/drivers/net/ena/rte_pmd_ena_version.map b/drivers/net/ena/version.map similarity index 100% rename from drivers/net/ena/rte_pmd_ena_version.map rename to drivers/net/ena/version.map diff --git a/drivers/net/enetc/rte_pmd_enetc_version.map b/drivers/net/enetc/version.map similarity index 100% rename from drivers/net/enetc/rte_pmd_enetc_version.map rename to drivers/net/enetc/version.map diff --git a/drivers/net/enic/rte_pmd_enic_version.map b/drivers/net/enic/version.map similarity index 100% rename from drivers/net/enic/rte_pmd_enic_version.map rename to drivers/net/enic/version.map diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/version.map similarity index 100% rename from drivers/net/failsafe/rte_pmd_failsafe_version.map rename to drivers/net/failsafe/version.map diff --git a/drivers/net/fm10k/rte_pmd_fm10k_version.map b/drivers/net/fm10k/version.map similarity index 100% rename from drivers/net/fm10k/rte_pmd_fm10k_version.map rename to drivers/net/fm10k/version.map diff --git a/drivers/net/hinic/rte_pmd_hinic_version.map b/drivers/net/hinic/version.map similarity index 100% rename from drivers/net/hinic/rte_pmd_hinic_version.map rename to drivers/net/hinic/version.map diff --git a/drivers/net/hns3/rte_pmd_hns3_version.map b/drivers/net/hns3/version.map similarity index 100% rename from drivers/net/hns3/rte_pmd_hns3_version.map rename to drivers/net/hns3/version.map diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/version.map similarity index 100% rename from drivers/net/i40e/rte_pmd_i40e_version.map rename to drivers/net/i40e/version.map diff --git a/drivers/net/iavf/rte_pmd_iavf_version.map b/drivers/net/iavf/version.map similarity index 100% rename from drivers/net/iavf/rte_pmd_iavf_version.map rename to drivers/net/iavf/version.map diff --git a/drivers/net/ice/rte_pmd_ice_version.map b/drivers/net/ice/version.map similarity index 100% rename from drivers/net/ice/rte_pmd_ice_version.map rename to drivers/net/ice/version.map diff --git a/drivers/net/igc/rte_pmd_igc_version.map b/drivers/net/igc/version.map similarity index 100% rename from drivers/net/igc/rte_pmd_igc_version.map rename to drivers/net/igc/version.map diff --git a/drivers/net/ionic/rte_pmd_ionic_version.map b/drivers/net/ionic/version.map similarity index 100% rename from drivers/net/ionic/rte_pmd_ionic_version.map rename to drivers/net/ionic/version.map diff --git a/drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map b/drivers/net/ipn3ke/version.map similarity index 100% rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map rename to drivers/net/ipn3ke/version.map diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/version.map similarity index 100% rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map rename to drivers/net/ixgbe/version.map diff --git a/drivers/net/kni/rte_pmd_kni_version.map b/drivers/net/kni/version.map similarity index 100% rename from drivers/net/kni/rte_pmd_kni_version.map rename to drivers/net/kni/version.map diff --git a/drivers/net/liquidio/rte_pmd_liquidio_version.map b/drivers/net/liquidio/version.map similarity index 100% rename from drivers/net/liquidio/rte_pmd_liquidio_version.map rename to drivers/net/liquidio/version.map diff --git a/drivers/net/memif/rte_pmd_memif_version.map b/drivers/net/memif/version.map similarity index 100% rename from drivers/net/memif/rte_pmd_memif_version.map rename to drivers/net/memif/version.map diff --git a/drivers/net/mlx4/rte_pmd_mlx4_version.map b/drivers/net/mlx4/version.map similarity index 100% rename from drivers/net/mlx4/rte_pmd_mlx4_version.map rename to drivers/net/mlx4/version.map diff --git a/drivers/net/mlx5/rte_pmd_mlx5_version.map b/drivers/net/mlx5/version.map similarity index 100% rename from drivers/net/mlx5/rte_pmd_mlx5_version.map rename to drivers/net/mlx5/version.map diff --git a/drivers/net/mvneta/rte_pmd_mvneta_version.map b/drivers/net/mvneta/version.map similarity index 100% rename from drivers/net/mvneta/rte_pmd_mvneta_version.map rename to drivers/net/mvneta/version.map diff --git a/drivers/net/mvpp2/rte_pmd_mvpp2_version.map b/drivers/net/mvpp2/version.map similarity index 100% rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map rename to drivers/net/mvpp2/version.map diff --git a/drivers/net/netvsc/rte_pmd_netvsc_version.map b/drivers/net/netvsc/version.map similarity index 100% rename from drivers/net/netvsc/rte_pmd_netvsc_version.map rename to drivers/net/netvsc/version.map diff --git a/drivers/net/nfb/rte_pmd_nfb_version.map b/drivers/net/nfb/version.map similarity index 100% rename from drivers/net/nfb/rte_pmd_nfb_version.map rename to drivers/net/nfb/version.map diff --git a/drivers/net/nfp/rte_pmd_nfp_version.map b/drivers/net/nfp/version.map similarity index 100% rename from drivers/net/nfp/rte_pmd_nfp_version.map rename to drivers/net/nfp/version.map diff --git a/drivers/net/null/rte_pmd_null_version.map b/drivers/net/null/version.map similarity index 100% rename from drivers/net/null/rte_pmd_null_version.map rename to drivers/net/null/version.map diff --git a/drivers/net/octeontx/rte_pmd_octeontx_version.map b/drivers/net/octeontx/version.map similarity index 100% rename from drivers/net/octeontx/rte_pmd_octeontx_version.map rename to drivers/net/octeontx/version.map diff --git a/drivers/net/octeontx2/rte_pmd_octeontx2_version.map b/drivers/net/octeontx2/version.map similarity index 100% rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map rename to drivers/net/octeontx2/version.map diff --git a/drivers/net/pcap/rte_pmd_pcap_version.map b/drivers/net/pcap/version.map similarity index 100% rename from drivers/net/pcap/rte_pmd_pcap_version.map rename to drivers/net/pcap/version.map diff --git a/drivers/net/pfe/rte_pmd_pfe_version.map b/drivers/net/pfe/version.map similarity index 100% rename from drivers/net/pfe/rte_pmd_pfe_version.map rename to drivers/net/pfe/version.map diff --git a/drivers/net/qede/rte_pmd_qede_version.map b/drivers/net/qede/version.map similarity index 100% rename from drivers/net/qede/rte_pmd_qede_version.map rename to drivers/net/qede/version.map diff --git a/drivers/net/ring/rte_pmd_ring_version.map b/drivers/net/ring/version.map similarity index 100% rename from drivers/net/ring/rte_pmd_ring_version.map rename to drivers/net/ring/version.map diff --git a/drivers/net/sfc/rte_pmd_sfc_version.map b/drivers/net/sfc/version.map similarity index 100% rename from drivers/net/sfc/rte_pmd_sfc_version.map rename to drivers/net/sfc/version.map diff --git a/drivers/net/softnic/rte_pmd_softnic_version.map b/drivers/net/softnic/version.map similarity index 100% rename from drivers/net/softnic/rte_pmd_softnic_version.map rename to drivers/net/softnic/version.map diff --git a/drivers/net/szedata2/rte_pmd_szedata2_version.map b/drivers/net/szedata2/version.map similarity index 100% rename from drivers/net/szedata2/rte_pmd_szedata2_version.map rename to drivers/net/szedata2/version.map diff --git a/drivers/net/tap/rte_pmd_tap_version.map b/drivers/net/tap/version.map similarity index 100% rename from drivers/net/tap/rte_pmd_tap_version.map rename to drivers/net/tap/version.map diff --git a/drivers/net/thunderx/rte_pmd_thunderx_version.map b/drivers/net/thunderx/version.map similarity index 100% rename from drivers/net/thunderx/rte_pmd_thunderx_version.map rename to drivers/net/thunderx/version.map diff --git a/drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map b/drivers/net/vdev_netvsc/version.map similarity index 100% rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map rename to drivers/net/vdev_netvsc/version.map diff --git a/drivers/net/vhost/rte_pmd_vhost_version.map b/drivers/net/vhost/version.map similarity index 100% rename from drivers/net/vhost/rte_pmd_vhost_version.map rename to drivers/net/vhost/version.map diff --git a/drivers/net/virtio/rte_pmd_virtio_version.map b/drivers/net/virtio/version.map similarity index 100% rename from drivers/net/virtio/rte_pmd_virtio_version.map rename to drivers/net/virtio/version.map diff --git a/drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map b/drivers/net/vmxnet3/version.map similarity index 100% rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map rename to drivers/net/vmxnet3/version.map diff --git a/drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map b/drivers/raw/dpaa2_cmdif/version.map similarity index 100% rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map rename to drivers/raw/dpaa2_cmdif/version.map diff --git a/drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map b/drivers/raw/dpaa2_qdma/version.map similarity index 100% rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map rename to drivers/raw/dpaa2_qdma/version.map diff --git a/drivers/raw/ifpga/rte_rawdev_ifpga_version.map b/drivers/raw/ifpga/version.map similarity index 100% rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map rename to drivers/raw/ifpga/version.map diff --git a/drivers/raw/ioat/rte_rawdev_ioat_version.map b/drivers/raw/ioat/version.map similarity index 100% rename from drivers/raw/ioat/rte_rawdev_ioat_version.map rename to drivers/raw/ioat/version.map diff --git a/drivers/raw/ntb/rte_rawdev_ntb_version.map b/drivers/raw/ntb/version.map similarity index 100% rename from drivers/raw/ntb/rte_rawdev_ntb_version.map rename to drivers/raw/ntb/version.map diff --git a/drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map b/drivers/raw/octeontx2_dma/version.map similarity index 100% rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map rename to drivers/raw/octeontx2_dma/version.map diff --git a/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map b/drivers/raw/octeontx2_ep/version.map similarity index 100% rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map rename to drivers/raw/octeontx2_ep/version.map diff --git a/drivers/raw/skeleton/rte_rawdev_skeleton_version.map b/drivers/raw/skeleton/version.map similarity index 100% rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map rename to drivers/raw/skeleton/version.map diff --git a/drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map b/drivers/regex/mlx5/version.map similarity index 100% rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map rename to drivers/regex/mlx5/version.map diff --git a/drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map b/drivers/regex/octeontx2/version.map similarity index 100% rename from drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map rename to drivers/regex/octeontx2/version.map diff --git a/drivers/vdpa/ifc/rte_pmd_ifc_version.map b/drivers/vdpa/ifc/version.map similarity index 100% rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map rename to drivers/vdpa/ifc/version.map diff --git a/drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map b/drivers/vdpa/mlx5/version.map similarity index 100% rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map rename to drivers/vdpa/mlx5/version.map diff --git a/lib/librte_acl/rte_acl_version.map b/lib/librte_acl/version.map similarity index 100% rename from lib/librte_acl/rte_acl_version.map rename to lib/librte_acl/version.map diff --git a/lib/librte_bbdev/rte_bbdev_version.map b/lib/librte_bbdev/version.map similarity index 100% rename from lib/librte_bbdev/rte_bbdev_version.map rename to lib/librte_bbdev/version.map diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/version.map similarity index 100% rename from lib/librte_bitratestats/rte_bitratestats_version.map rename to lib/librte_bitratestats/version.map diff --git a/lib/librte_bpf/rte_bpf_version.map b/lib/librte_bpf/version.map similarity index 100% rename from lib/librte_bpf/rte_bpf_version.map rename to lib/librte_bpf/version.map diff --git a/lib/librte_cfgfile/rte_cfgfile_version.map b/lib/librte_cfgfile/version.map similarity index 100% rename from lib/librte_cfgfile/rte_cfgfile_version.map rename to lib/librte_cfgfile/version.map diff --git a/lib/librte_cmdline/rte_cmdline_version.map b/lib/librte_cmdline/version.map similarity index 100% rename from lib/librte_cmdline/rte_cmdline_version.map rename to lib/librte_cmdline/version.map diff --git a/lib/librte_compressdev/rte_compressdev_version.map b/lib/librte_compressdev/version.map similarity index 100% rename from lib/librte_compressdev/rte_compressdev_version.map rename to lib/librte_compressdev/version.map diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/version.map similarity index 100% rename from lib/librte_cryptodev/rte_cryptodev_version.map rename to lib/librte_cryptodev/version.map diff --git a/lib/librte_distributor/rte_distributor_version.map b/lib/librte_distributor/version.map similarity index 100% rename from lib/librte_distributor/rte_distributor_version.map rename to lib/librte_distributor/version.map diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/version.map similarity index 100% rename from lib/librte_eal/rte_eal_version.map rename to lib/librte_eal/version.map diff --git a/lib/librte_efd/rte_efd_version.map b/lib/librte_efd/version.map similarity index 100% rename from lib/librte_efd/rte_efd_version.map rename to lib/librte_efd/version.map diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/version.map similarity index 100% rename from lib/librte_ethdev/rte_ethdev_version.map rename to lib/librte_ethdev/version.map diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/version.map similarity index 100% rename from lib/librte_eventdev/rte_eventdev_version.map rename to lib/librte_eventdev/version.map diff --git a/lib/librte_fib/rte_fib_version.map b/lib/librte_fib/version.map similarity index 100% rename from lib/librte_fib/rte_fib_version.map rename to lib/librte_fib/version.map diff --git a/lib/librte_flow_classify/rte_flow_classify_version.map b/lib/librte_flow_classify/version.map similarity index 100% rename from lib/librte_flow_classify/rte_flow_classify_version.map rename to lib/librte_flow_classify/version.map diff --git a/lib/librte_graph/rte_graph_version.map b/lib/librte_graph/version.map similarity index 100% rename from lib/librte_graph/rte_graph_version.map rename to lib/librte_graph/version.map diff --git a/lib/librte_gro/rte_gro_version.map b/lib/librte_gro/version.map similarity index 100% rename from lib/librte_gro/rte_gro_version.map rename to lib/librte_gro/version.map diff --git a/lib/librte_gso/rte_gso_version.map b/lib/librte_gso/version.map similarity index 100% rename from lib/librte_gso/rte_gso_version.map rename to lib/librte_gso/version.map diff --git a/lib/librte_hash/rte_hash_version.map b/lib/librte_hash/version.map similarity index 100% rename from lib/librte_hash/rte_hash_version.map rename to lib/librte_hash/version.map diff --git a/lib/librte_ip_frag/rte_ip_frag_version.map b/lib/librte_ip_frag/version.map similarity index 100% rename from lib/librte_ip_frag/rte_ip_frag_version.map rename to lib/librte_ip_frag/version.map diff --git a/lib/librte_ipsec/rte_ipsec_version.map b/lib/librte_ipsec/version.map similarity index 100% rename from lib/librte_ipsec/rte_ipsec_version.map rename to lib/librte_ipsec/version.map diff --git a/lib/librte_jobstats/rte_jobstats_version.map b/lib/librte_jobstats/version.map similarity index 100% rename from lib/librte_jobstats/rte_jobstats_version.map rename to lib/librte_jobstats/version.map diff --git a/lib/librte_kni/rte_kni_version.map b/lib/librte_kni/version.map similarity index 100% rename from lib/librte_kni/rte_kni_version.map rename to lib/librte_kni/version.map diff --git a/lib/librte_kvargs/rte_kvargs_version.map b/lib/librte_kvargs/version.map similarity index 100% rename from lib/librte_kvargs/rte_kvargs_version.map rename to lib/librte_kvargs/version.map diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/version.map similarity index 100% rename from lib/librte_latencystats/rte_latencystats_version.map rename to lib/librte_latencystats/version.map diff --git a/lib/librte_lpm/rte_lpm_version.map b/lib/librte_lpm/version.map similarity index 100% rename from lib/librte_lpm/rte_lpm_version.map rename to lib/librte_lpm/version.map diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/version.map similarity index 100% rename from lib/librte_mbuf/rte_mbuf_version.map rename to lib/librte_mbuf/version.map diff --git a/lib/librte_member/rte_member_version.map b/lib/librte_member/version.map similarity index 100% rename from lib/librte_member/rte_member_version.map rename to lib/librte_member/version.map diff --git a/lib/librte_mempool/rte_mempool_version.map b/lib/librte_mempool/version.map similarity index 100% rename from lib/librte_mempool/rte_mempool_version.map rename to lib/librte_mempool/version.map diff --git a/lib/librte_meter/rte_meter_version.map b/lib/librte_meter/version.map similarity index 100% rename from lib/librte_meter/rte_meter_version.map rename to lib/librte_meter/version.map diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/version.map similarity index 100% rename from lib/librte_metrics/rte_metrics_version.map rename to lib/librte_metrics/version.map diff --git a/lib/librte_net/rte_net_version.map b/lib/librte_net/version.map similarity index 100% rename from lib/librte_net/rte_net_version.map rename to lib/librte_net/version.map diff --git a/lib/librte_node/rte_node_version.map b/lib/librte_node/version.map similarity index 100% rename from lib/librte_node/rte_node_version.map rename to lib/librte_node/version.map diff --git a/lib/librte_pci/rte_pci_version.map b/lib/librte_pci/version.map similarity index 100% rename from lib/librte_pci/rte_pci_version.map rename to lib/librte_pci/version.map diff --git a/lib/librte_pdump/rte_pdump_version.map b/lib/librte_pdump/version.map similarity index 100% rename from lib/librte_pdump/rte_pdump_version.map rename to lib/librte_pdump/version.map diff --git a/lib/librte_pipeline/rte_pipeline_version.map b/lib/librte_pipeline/version.map similarity index 100% rename from lib/librte_pipeline/rte_pipeline_version.map rename to lib/librte_pipeline/version.map diff --git a/lib/librte_port/rte_port_version.map b/lib/librte_port/version.map similarity index 100% rename from lib/librte_port/rte_port_version.map rename to lib/librte_port/version.map diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/version.map similarity index 100% rename from lib/librte_power/rte_power_version.map rename to lib/librte_power/version.map diff --git a/lib/librte_rawdev/rte_rawdev_version.map b/lib/librte_rawdev/version.map similarity index 100% rename from lib/librte_rawdev/rte_rawdev_version.map rename to lib/librte_rawdev/version.map diff --git a/lib/librte_rcu/rte_rcu_version.map b/lib/librte_rcu/version.map similarity index 100% rename from lib/librte_rcu/rte_rcu_version.map rename to lib/librte_rcu/version.map diff --git a/lib/librte_regexdev/rte_regexdev_version.map b/lib/librte_regexdev/version.map similarity index 100% rename from lib/librte_regexdev/rte_regexdev_version.map rename to lib/librte_regexdev/version.map diff --git a/lib/librte_reorder/rte_reorder_version.map b/lib/librte_reorder/version.map similarity index 100% rename from lib/librte_reorder/rte_reorder_version.map rename to lib/librte_reorder/version.map diff --git a/lib/librte_rib/rte_rib_version.map b/lib/librte_rib/version.map similarity index 100% rename from lib/librte_rib/rte_rib_version.map rename to lib/librte_rib/version.map diff --git a/lib/librte_ring/rte_ring_version.map b/lib/librte_ring/version.map similarity index 100% rename from lib/librte_ring/rte_ring_version.map rename to lib/librte_ring/version.map diff --git a/lib/librte_sched/rte_sched_version.map b/lib/librte_sched/version.map similarity index 100% rename from lib/librte_sched/rte_sched_version.map rename to lib/librte_sched/version.map diff --git a/lib/librte_security/rte_security_version.map b/lib/librte_security/version.map similarity index 100% rename from lib/librte_security/rte_security_version.map rename to lib/librte_security/version.map diff --git a/lib/librte_stack/rte_stack_version.map b/lib/librte_stack/version.map similarity index 100% rename from lib/librte_stack/rte_stack_version.map rename to lib/librte_stack/version.map diff --git a/lib/librte_table/rte_table_version.map b/lib/librte_table/version.map similarity index 100% rename from lib/librte_table/rte_table_version.map rename to lib/librte_table/version.map diff --git a/lib/librte_telemetry/rte_telemetry_version.map b/lib/librte_telemetry/version.map similarity index 100% rename from lib/librte_telemetry/rte_telemetry_version.map rename to lib/librte_telemetry/version.map diff --git a/lib/librte_timer/rte_timer_version.map b/lib/librte_timer/version.map similarity index 100% rename from lib/librte_timer/rte_timer_version.map rename to lib/librte_timer/version.map diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/version.map similarity index 100% rename from lib/librte_vhost/rte_vhost_version.map rename to lib/librte_vhost/version.map diff --git a/lib/meson.build b/lib/meson.build index e5597f174..8761457c9 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -139,8 +139,8 @@ foreach l:libraries # RTE_BUILD_SHARED_LIB defined cflags += '-DRTE_BUILD_SHARED_LIB' endif - version_map = '@0@/@1@/rte_@2@_version.map'.format( - meson.current_source_dir(), dir_name, name) + version_map = '@0@/@1@/version.map'.format( + meson.current_source_dir(), dir_name) implib = dir_name + '.dll.a' def_file = custom_target(libname + '_def', -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename Bruce Richardson @ 2020-10-18 11:56 ` Xu, Rosen 0 siblings, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 11:56 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Ray Kinsella, Neil Horman, Chautru, Nicolas, Hemant Agrawal, Sachin Saxena, Stephen Hemminger, Long Li, Anoob Joseph, Wu, Jingjing, Xing, Beilei, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, Trahe, Fiona, Griffin, John, Jain, Deepak K, Andrew Rybchenko, Daly, Lee, Ashish Gupta, Sunila Sahu, Doherty, Declan, De Lara Guarch, Pablo, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Zhang, Roy Fan, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Ma, Liang J, Mccarthy, Peter, Van Haaren, Harry, Artem V. Andreev, Olivier Matz, Eads, Gage, John W. Linville, Loftus, Ciara, Zhang, Qi Z, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Guo, Jia, Wang, Haiyue, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Wang, Xiao W, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Yang, Qiming, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Singh, Jasvinder, Dumitrescu, Cristian, Wiles, Keith, Maciej Czekaj, Maxime Coquelin, Xia, Chenbo, Wang, Zhihong, Yong Wang, Zhang, Tianfei, Li, Xiaoyun, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Ananyev, Konstantin, Hunt, David, Marohn, Byron, Wang, Yipeng1, Medvedkin, Vladimir, Iremonger, Bernard, Hu, Jiayu, Gobriel, Sameh, Pattan, Reshma, Honnappa Nagarahalli, Laatz, Kevin, Robert Sanford, Carrillo, Erik G > Subject: [PATCH v4 5/8] build: remove library name from version map > filename > > Since each version map file is contained in the subdirectory of the library > it refers to, there is no need to include the library name in the filename. > This makes things simpler in case of library renaming. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 6/8] devtools/test-null: load all drivers from directory 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson ` (4 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros Bruce Richardson 7 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Andrew Rybchenko Rather than specifying specific drivers in the driver directory to load, we can just pass in the whole driver directory to the "-d" EAL flag, causing all drivers to load. This makes the load of driver independent of any specific driver names. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- devtools/test-null.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/devtools/test-null.sh b/devtools/test-null.sh index 548de8113..1a6950f39 100755 --- a/devtools/test-null.sh +++ b/devtools/test-null.sh @@ -21,7 +21,7 @@ fi if ldd $testpmd | grep -q librte_ ; then export LD_LIBRARY_PATH=$build/drivers:$build/lib:$LD_LIBRARY_PATH - libs='-d librte_mempool_ring.so -d librte_pmd_null.so' + libs="-d $build/drivers" else libs= fi -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson ` (5 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 6/8] devtools/test-null: load all drivers from directory Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-18 11:55 ` Xu, Rosen 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros Bruce Richardson 7 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Nicolas Chautru, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, John Griffin, Fiona Trahe, Deepak Kumar Jain, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Fan Zhang, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Rosen Xu, Tianfei zhang, Chas Williams, Min Hu (Connor), Xiaoyun Li, Jingjing Wu, David Hunt, Andrew Rybchenko, Kiran Kumar K, Nithin Dabilpuram As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros. Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'. Similarly, for libraries, the equivalent name formats and macros are: 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc. To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u --- app/test-bbdev/meson.build | 4 ++-- app/test-crypto-perf/meson.build | 2 +- app/test-pmd/meson.build | 12 ++++++------ app/test/meson.build | 8 ++++---- doc/guides/rel_notes/deprecation.rst | 8 ++++++++ drivers/baseband/meson.build | 1 - drivers/bus/meson.build | 1 - drivers/common/meson.build | 1 - drivers/common/mlx5/meson.build | 1 - drivers/common/qat/meson.build | 1 - drivers/compress/meson.build | 1 - drivers/compress/octeontx/meson.build | 2 +- drivers/crypto/meson.build | 1 - drivers/crypto/null/meson.build | 2 +- drivers/crypto/octeontx/meson.build | 2 +- drivers/crypto/octeontx2/meson.build | 2 +- drivers/crypto/scheduler/meson.build | 2 +- drivers/crypto/virtio/meson.build | 2 +- drivers/event/dpaa/meson.build | 2 +- drivers/event/dpaa2/meson.build | 2 +- drivers/event/meson.build | 1 - drivers/event/octeontx/meson.build | 2 +- drivers/event/octeontx2/meson.build | 2 +- drivers/mempool/meson.build | 1 - drivers/meson.build | 9 ++++----- drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- drivers/raw/ifpga/meson.build | 2 +- drivers/raw/meson.build | 1 - drivers/regex/meson.build | 1 - drivers/vdpa/meson.build | 1 - examples/bond/meson.build | 2 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/l2fwd-crypto/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vm_power_manager/meson.build | 6 +++--- lib/librte_ethdev/meson.build | 1 - lib/librte_graph/meson.build | 2 -- lib/meson.build | 3 ++- 40 files changed, 47 insertions(+), 55 deletions(-) diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 18ab6a8c6..178306b08 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -7,8 +7,8 @@ sources = files('main.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') - deps += ['pmd_bbdev_fpga_lte_fec'] + deps += ['baseband_fpga_lte_fec'] endif if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') - deps += ['pmd_bbdev_fpga_5gnr_fec'] + deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index 4bd71510d..e6ddda6f0 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -13,5 +13,5 @@ sources = files('cperf_ops.c', 'main.c') deps += ['cryptodev', 'net', 'security'] if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 0d9e45049..2e8b9f8a9 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') deps += 'latencystats' endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - deps += 'pmd_bond' + deps += 'net_bond' endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += 'pmd_bnxt' + deps += 'net_bnxt' endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += 'pmd_i40e' + deps += 'net_i40e' endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') - deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa'] + deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif if dpdk_conf.has('RTE_LIBRTE_BPF') sources += files('bpf_cmd.c') diff --git a/app/test/meson.build b/app/test/meson.build index fc90a1909..c5ce1d2c0 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -345,7 +345,7 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') test_deps += 'mempool_stack' endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') - test_deps += 'pmd_skeleton_event' + test_deps += 'event_skeleton' endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] @@ -355,7 +355,7 @@ endif # The following linkages of drivers are required because # they are used via a driver-specific API. if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - test_deps += 'pmd_bond' + test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] if dpdk_conf.has('RTE_LIBRTE_RING_PMD') @@ -364,7 +364,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') endif endif if dpdk_conf.has('RTE_LIBRTE_RING_PMD') - test_deps += 'pmd_ring' + test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' test_sources += 'test_event_eth_tx_adapter.c' @@ -415,7 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' - test_deps += 'pmd_crypto_scheduler' + test_deps += 'crypto_scheduler' endif foreach d:test_deps diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 584e72087..69e3ef91c 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,6 +11,14 @@ here. Deprecation Notices ------------------- +* build: The macros defined to indicate which DPDK libraries and drivers + are included in the meson build are changing to a standardized format of + ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the + upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the + upper-case name of the device class to which a driver belongs e.g. + ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be + removed in a future release. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build index 415b6724b..7e1b64ffd 100644 --- a/drivers/baseband/meson.build +++ b/drivers/baseband/meson.build @@ -8,4 +8,3 @@ endif drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec'] config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' -driver_name_fmt = 'rte_pmd_bbdev_@0@' diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build index 80de2d91d..bd73efd18 100644 --- a/drivers/bus/meson.build +++ b/drivers/bus/meson.build @@ -4,4 +4,3 @@ drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' -driver_name_fmt = 'rte_bus_@0@' diff --git a/drivers/common/meson.build b/drivers/common/meson.build index abb4f1529..d78882f05 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -8,4 +8,3 @@ endif std_deps = ['eal'] drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/mlx5/meson.build b/drivers/common/mlx5/meson.build index 8e5608703..3dacc6f68 100644 --- a/drivers/common/mlx5/meson.build +++ b/drivers/common/mlx5/meson.build @@ -8,7 +8,6 @@ if not is_linux endif config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mlx5_devx_cmds.c', diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 3409162d0..fdf8b84f8 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -2,7 +2,6 @@ # Copyright(c) 2017-2018 Intel Corporation config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' qat_crypto = true qat_crypto_path = 'crypto/qat' diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index 3a4723c0c..33f5e33dd 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/compress/octeontx/meson.build b/drivers/compress/octeontx/meson.build index 0dc98b762..2d71b4da2 100644 --- a/drivers/compress/octeontx/meson.build +++ b/drivers/compress/octeontx/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cavium, Inc -name = 'octeontx_compress' +fmt_name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index bd7a940e6..fa5c7ef3a 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,4 +26,3 @@ drivers = ['aesni_gcm', std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/null/meson.build b/drivers/crypto/null/meson.build index 502336da2..421414916 100644 --- a/drivers/crypto/null/meson.build +++ b/drivers/crypto/null/meson.build @@ -2,5 +2,5 @@ # Copyright(c) 2017 Intel Corporation deps += 'bus_vdev' -name = 'null_crypto' +fmt_name = 'null_crypto' sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c') diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build index cf031b006..d6939720d 100644 --- a/drivers/crypto/octeontx/meson.build +++ b/drivers/crypto/octeontx/meson.build @@ -7,7 +7,7 @@ endif deps += ['bus_pci'] deps += ['common_cpt'] -name = 'octeontx_crypto' +fmt_name = 'octeontx_crypto' sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build index 148ec184a..bf502e247 100644 --- a/drivers/crypto/octeontx2/meson.build +++ b/drivers/crypto/octeontx2/meson.build @@ -11,7 +11,7 @@ deps += ['common_cpt'] deps += ['common_octeontx2'] deps += ['ethdev'] deps += ['security'] -name = 'octeontx2_crypto' +fmt_name = 'octeontx2_crypto' sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', diff --git a/drivers/crypto/scheduler/meson.build b/drivers/crypto/scheduler/meson.build index c5ba2d680..2209c5023 100644 --- a/drivers/crypto/scheduler/meson.build +++ b/drivers/crypto/scheduler/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Luca Boccassi <bluca@debian.org> deps += ['bus_vdev', 'reorder'] -name = 'crypto_scheduler' +fmt_name = 'crypto_scheduler' sources = files( 'rte_cryptodev_scheduler.c', 'scheduler_failover.c', diff --git a/drivers/crypto/virtio/meson.build b/drivers/crypto/virtio/meson.build index b15b3f9fa..6cea782de 100644 --- a/drivers/crypto/virtio/meson.build +++ b/drivers/crypto/virtio/meson.build @@ -3,6 +3,6 @@ includes += include_directories('../../../lib/librte_vhost') deps += 'bus_pci' -name = 'virtio_crypto' +fmt_name = 'virtio_crypto' sources = files('virtio_cryptodev.c', 'virtio_pci.c', 'virtio_rxtx.c', 'virtqueue.c') diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build index 2f761f8e5..9abb75e3e 100644 --- a/drivers/event/dpaa/meson.build +++ b/drivers/event/dpaa/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['pmd_dpaa', 'pmd_dpaa_sec'] +deps += ['net_dpaa', 'crypto_dpaa_sec'] sources = files('dpaa_eventdev.c') includes += include_directories('../../crypto/dpaa_sec/') diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build index 71c8be3d6..4ead7bb3e 100644 --- a/drivers/event/dpaa2/meson.build +++ b/drivers/event/dpaa2/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec'] +deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec'] sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') diff --git a/drivers/event/meson.build b/drivers/event/meson.build index f2a343147..a7dac99de 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and endif std_deps = ['eventdev', 'kvargs'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' -driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/event/octeontx/meson.build b/drivers/event/octeontx/meson.build index 2b74bb62d..41e367684 100644 --- a/drivers/event/octeontx/meson.build +++ b/drivers/event/octeontx/meson.build @@ -10,4 +10,4 @@ sources = files('ssovf_worker.c', 'timvf_probe.c' ) -deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx'] +deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx'] diff --git a/drivers/event/octeontx2/meson.build b/drivers/event/octeontx2/meson.build index 0ade51cec..3e5eb37d2 100644 --- a/drivers/event/octeontx2/meson.build +++ b/drivers/event/octeontx2/meson.build @@ -24,6 +24,6 @@ foreach flag: extra_flags endif endforeach -deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2'] +deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2'] includes += include_directories('../../crypto/octeontx2') diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build index 7520e489f..a6ddd35b2 100644 --- a/drivers/mempool/meson.build +++ b/drivers/mempool/meson.build @@ -4,4 +4,3 @@ drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack'] std_deps = ['mempool'] config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' -driver_name_fmt = 'rte_mempool_@0@' diff --git a/drivers/meson.build b/drivers/meson.build index 3d4bbff13..a5a6fed06 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -33,9 +33,6 @@ foreach subpath:subdirs drivers = [] std_deps = [] config_flag_fmt = '' # format string used to set the value in dpdk_conf - driver_name_fmt = '' # format string for driver name, used to name - # the library, the dependency and to find the - # version file for linking # subpath can be either "class" or "class/driver" if subpath.contains('/') @@ -113,11 +110,14 @@ foreach subpath:subdirs endif else enabled_drivers += name + lib_name = '_'.join(['rte', class, name]) + dpdk_conf.set(lib_name.to_upper(), 1) if fmt_name == '' fmt_name = name endif - dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + + dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro # for driver compatibility, since we changed the # default to match that of make. Remove in future release # after following deprecation process @@ -133,7 +133,6 @@ foreach subpath:subdirs dpdk_conf.set(alt_flag_fmt.format( fmt_name.to_upper()), 1) endif - lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs diff --git a/drivers/net/meson.build b/drivers/net/meson.build index d56b24051..4e4c2c976 100644 --- a/drivers/net/meson.build +++ b/drivers/net/meson.build @@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std std_deps += ['bus_vdev'] # same with vdev bus config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/net/mlx4/meson.build b/drivers/net/mlx4/meson.build index 5a25e11a7..404006515 100644 --- a/drivers/net/mlx4/meson.build +++ b/drivers/net/mlx4/meson.build @@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config) # Build Glue Library if dlopen_ibverbs dlopen_name = 'mlx4_glue' - dlopen_lib_name = driver_name_fmt.format(dlopen_name) + dlopen_lib_name = 'rte_net_' + dlopen_name dlopen_so_version = LIB_GLUE_VERSION dlopen_sources = files('mlx4_glue.c') dlopen_install_dir = [ eal_pmd_path + '-glue' ] diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build index da454b194..027ff8056 100644 --- a/drivers/raw/ifpga/meson.build +++ b/drivers/raw/ifpga/meson.build @@ -11,7 +11,7 @@ subdir('base') objs = [base_objs] deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs', - 'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke'] + 'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke'] sources = files('ifpga_rawdev.c') diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build index 2c1e65ec7..d8d6cf582 100644 --- a/drivers/raw/meson.build +++ b/drivers/raw/meson.build @@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma', 'skeleton'] std_deps = ['rawdev'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' -driver_name_fmt = 'rte_rawdev_@0@' diff --git a/drivers/regex/meson.build b/drivers/regex/meson.build index 79bb5d5df..880a1b4a3 100644 --- a/drivers/regex/meson.build +++ b/drivers/regex/meson.build @@ -4,4 +4,3 @@ drivers = ['mlx5', 'octeontx2'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/vdpa/meson.build b/drivers/vdpa/meson.build index 798eb3830..b346e4308 100644 --- a/drivers/vdpa/meson.build +++ b/drivers/vdpa/meson.build @@ -10,4 +10,3 @@ drivers = ['ifc', std_deps = ['bus_pci', 'kvargs'] std_deps += ['vhost'] config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/examples/bond/meson.build b/examples/bond/meson.build index 82e355a49..69382ffcd 100644 --- a/examples/bond/meson.build +++ b/examples/bond/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -deps += 'pmd_bond' +deps += 'net_bond' allow_experimental_apis = true sources = files( 'main.c' diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index bc7a35514..fdfdd1971 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif allow_experimental_apis = true diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f72cf70e7..f1a045a0a 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -9,7 +9,7 @@ allow_experimental_apis = true build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') -deps += ['rawdev_ioat'] +deps += ['raw_ioat'] sources = files( 'ioatfwd.c' diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 39e1604fa..9002d62a6 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -8,7 +8,7 @@ deps += 'cryptodev' if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif allow_experimental_apis = true sources = files( diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index 45a59350c..bac6e5cd2 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -16,5 +16,5 @@ sources = files( 'ntb_fwd.c' ) if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') - deps += 'rawdev_ntb' + deps += 'raw_ntb' endif diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 54e2b584f..2dd132015 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -14,15 +14,15 @@ endif deps += ['power'] if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += ['pmd_bnxt'] + deps += ['net_bnxt'] endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += ['pmd_i40e'] + deps += ['net_i40e'] endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += ['pmd_ixgbe'] + deps += ['net_ixgbe'] endif allow_experimental_apis = true diff --git a/lib/librte_ethdev/meson.build b/lib/librte_ethdev/meson.build index 8fc24e8c8..e4b610246 100644 --- a/lib/librte_ethdev/meson.build +++ b/lib/librte_ethdev/meson.build @@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -name = 'ethdev' sources = files('ethdev_private.c', 'ethdev_profile.c', 'ethdev_trace_points.c', diff --git a/lib/librte_graph/meson.build b/lib/librte_graph/meson.build index d5de1e250..d3ec78ca6 100644 --- a/lib/librte_graph/meson.build +++ b/lib/librte_graph/meson.build @@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(C) 2020 Marvell International Ltd. -name = 'graph' - sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c') headers = files('rte_graph.h', 'rte_graph_worker.h') diff --git a/lib/meson.build b/lib/meson.build index 8761457c9..5f8177e1a 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -98,7 +98,8 @@ foreach l:libraries set_variable(name.underscorify() + '_disable_reason', reason) else enabled_libs += name - dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) + dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro + dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro install_headers(headers) libname = 'rte_' + name -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines Bruce Richardson @ 2020-10-18 11:55 ` Xu, Rosen 0 siblings, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 11:55 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Chautru, Nicolas, Doherty, Declan, Lu, Wenzhuo, Xing, Beilei, Iremonger, Bernard, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Griffin, John, Trahe, Fiona, Jain, Deepak K, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Zhang, Roy Fan, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Zhang, Tianfei, Chas Williams, Min Hu (Connor), Li, Xiaoyun, Wu, Jingjing, Hunt, David, Andrew Rybchenko, Kiran Kumar K, Nithin Dabilpuram > Subject: [PATCH v4 7/8] build: standardize component names and defines > > As discussed on the dpdk-dev mailing list[1], we can make some easy > improvements in standardizing the naming of the various components in > DPDK, and their associated feature-enabled macros. > > Following this patch, each library will have the name in format, > 'librte_<name>.so', and the macro indicating that library is enabled in the > build will have the form 'RTE_LIB_<NAME>'. > > Similarly, for libraries, the equivalent name formats and macros are: > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > device type taken from the relevant driver subdirectory name, i.e. 'net', > 'crypto' etc. > > To avoid too many changes at once for end applications, the old macro > names will still be provided in the build in this release, but will be removed > subsequently. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Reviewed-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson ` (6 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines Bruce Richardson @ 2020-10-15 11:03 ` Bruce Richardson 2020-10-18 11:55 ` Xu, Rosen 7 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 11:03 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Maryam Tahhan, Reshma Pattan, Nicolas Chautru, Declan Doherty, Cristian Dumitrescu, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Yipeng Wang, Sameh Gobriel, Olivier Matz, Andrew Rybchenko, Vladimir Medvedkin, Anatoly Burakov, Honnappa Nagarahalli, Konstantin Ananyev, David Hunt, Hemant Agrawal, Sachin Saxena, Fiona Trahe, Ashish Gupta, Pablo de Lara, Akhil Goyal, John Griffin, Deepak Kumar Jain, Jeff Guo, Haiyue Wang, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Nipun Gupta, Rosen Xu, Tianfei zhang, Xiao Wang, Xiaoyun Li, Jingjing Wu Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 4 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 2 +- app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 22 +- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 22 +- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- drivers/net/kni/meson.build | 2 +- drivers/net/netvsc/meson.build | 2 +- drivers/net/vhost/meson.build | 2 +- drivers/raw/dpaa2_cmdif/meson.build | 2 +- drivers/raw/dpaa2_qdma/meson.build | 2 +- drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/vdpa/ifc/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 2 +- examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 8 +- lib/librte_eal/linux/eal.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- lib/librte_port/meson.build | 2 +- lib/meson.build | 2 +- 85 files changed, 389 insertions(+), 389 deletions(-) diff --git a/app/proc-info/main.c b/app/proc-info/main.c index b0de39489..353b3921c 100644 --- a/app/proc-info/main.c +++ b/app/proc-info/main.c @@ -30,7 +30,7 @@ #include <rte_string_fns.h> #include <rte_metrics.h> #include <rte_cycles.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif #include <rte_cryptodev.h> @@ -739,7 +739,7 @@ show_port(void) } printf(" - cyrpto context\n"); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY void *p_ctx = rte_eth_dev_get_sec_ctx(i); printf("\t -- security context - %p\n", p_ctx); diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 178306b08..a2bd7dca6 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -6,9 +6,9 @@ sources = files('main.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_LTE_FEC') deps += ['baseband_fpga_lte_fec'] endif -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_5GNR_FEC') deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c index 45c0d62ac..2e85eccf9 100644 --- a/app/test-bbdev/test_bbdev_perf.c +++ b/app/test-bbdev/test_bbdev_perf.c @@ -26,7 +26,7 @@ #define MAX_QUEUES RTE_MAX_LCORE #define TEST_REPETITIONS 1000 -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC #include <fpga_lte_fec.h> #define FPGA_LTE_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf") #define FPGA_LTE_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf") @@ -39,7 +39,7 @@ #define FLR_4G_TIMEOUT 610 #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC #include <rte_pmd_fpga_5gnr_fec.h> #define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf") #define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf") @@ -565,7 +565,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, /* Configure fpga lte fec with PF & VF values * if '-i' flag is set and using fpga device */ -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_LTE_PF_DRIVER_NAME))) { struct fpga_lte_fec_conf conf; @@ -609,7 +609,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, info->dev_name); } #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) { struct fpga_5gnr_fec_conf conf; diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c index 3da835a9c..cc45af7f2 100644 --- a/app/test-crypto-perf/cperf_ops.c +++ b/app/test-crypto-perf/cperf_ops.c @@ -8,7 +8,7 @@ #include "cperf_ops.h" #include "cperf_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int cperf_set_ops_security(struct rte_crypto_op **ops, uint32_t src_buf_offset __rte_unused, @@ -551,7 +551,7 @@ cperf_create_session(struct rte_mempool *sess_mp, struct rte_crypto_sym_xform aead_xform; struct rte_cryptodev_sym_session *sess = NULL; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * security only */ @@ -844,7 +844,7 @@ cperf_get_op_functions(const struct cperf_options *options, op_fns->populate_ops = cperf_set_ops_cipher; return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_PDCP) { op_fns->populate_ops = cperf_set_ops_security; return 0; diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-perf/cperf_options.h index 256fabb07..9664a4b34 100644 --- a/app/test-crypto-perf/cperf_options.h +++ b/app/test-crypto-perf/cperf_options.h @@ -7,7 +7,7 @@ #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -47,7 +47,7 @@ #define CPERF_DIGEST_SZ ("digest-sz") -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define CPERF_PDCP_SN_SZ ("pdcp-sn-sz") #define CPERF_PDCP_DOMAIN ("pdcp-domain") #define CPERF_PDCP_SES_HFN_EN ("pdcp-ses-hfn-en") @@ -123,7 +123,7 @@ struct cperf_options { uint16_t digest_sz; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint16_t pdcp_sn_sz; uint16_t pdcp_ses_hfn_en; enum rte_security_pdcp_domain pdcp_domain; diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c index 8e086f88e..03ed6f594 100644 --- a/app/test-crypto-perf/cperf_options_parsing.c +++ b/app/test-crypto-perf/cperf_options_parsing.c @@ -57,7 +57,7 @@ usage(char *progname) " --pmd-cyclecount-delay-ms N: set delay between enqueue\n" " and dequeue in pmd-cyclecount benchmarking mode\n" " --csv-friendly: enable test result output CSV friendly\n" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY " --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n" " --pdcp-domain DOMAIN: set PDCP domain <control/user>\n" " --pdcp-ses-hfn-en: enable session based fixed HFN\n" @@ -631,7 +631,7 @@ parse_digest_sz(struct cperf_options *opts, const char *arg) return parse_uint16_t(&opts->digest_sz, arg); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int parse_pdcp_sn_sz(struct cperf_options *opts, const char *arg) { @@ -841,7 +841,7 @@ static struct option lgopts[] = { { CPERF_DIGEST_SZ, required_argument, 0, 0 }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, required_argument, 0, 0 }, { CPERF_PDCP_DOMAIN, required_argument, 0, 0 }, { CPERF_PDCP_SES_HFN_EN, no_argument, 0, 0 }, @@ -913,7 +913,7 @@ cperf_options_default(struct cperf_options *opts) opts->digest_sz = 12; opts->pmdcc_delay = 0; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY opts->pdcp_sn_sz = 12; opts->pdcp_domain = RTE_SECURITY_PDCP_MODE_CONTROL; opts->pdcp_ses_hfn_en = 0; @@ -954,7 +954,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts) { CPERF_AEAD_IV_SZ, parse_aead_iv_sz }, { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz }, { CPERF_DIGEST_SZ, parse_digest_sz }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, parse_pdcp_sn_sz }, { CPERF_PDCP_DOMAIN, parse_pdcp_domain }, { CPERF_PDCP_SES_HFN_EN, parse_pdcp_ses_hfn_en }, @@ -1061,7 +1061,7 @@ check_cipher_buffer_length(struct cperf_options *options) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int check_docsis_buffer_length(struct cperf_options *options) { @@ -1215,7 +1215,7 @@ cperf_options_check(struct cperf_options *options) return -EINVAL; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_DOCSIS) { if (check_docsis_buffer_length(options) < 0) return -EINVAL; @@ -1308,7 +1308,7 @@ cperf_options_dump(struct cperf_options *opts) printf("#\n"); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (opts->op_type == CPERF_DOCSIS) { printf("# docsis header size: %u\n", opts->docsis_hdr_sz); printf("#\n"); diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c index 69f0943d1..4e67d3aeb 100644 --- a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c @@ -63,7 +63,7 @@ cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-perf/cperf_test_throughput.c index 12d9ea4f9..f30f7d5c2 100644 --- a/app/test-crypto-perf/cperf_test_throughput.c +++ b/app/test-crypto-perf/cperf_test_throughput.c @@ -35,7 +35,7 @@ cperf_throughput_test_free(struct cperf_throughput_ctx *ctx) if (!ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/main.c b/app/test-crypto-perf/main.c index 8f8e580e4..f4f7e31c9 100644 --- a/app/test-crypto-perf/main.c +++ b/app/test-crypto-perf/main.c @@ -9,7 +9,7 @@ #include <rte_random.h> #include <rte_eal.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -170,7 +170,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) for (i = 0; i < enabled_cdev_count && i < RTE_CRYPTO_MAX_DEVS; i++) { cdev_id = enabled_cdevs[i]; -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* * If multi-core scheduler is used, limit the number * of queue pairs to 1, as there is no way to know @@ -238,7 +238,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) */ if (!strcmp((const char *)opts->device_type, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index e6ddda6f0..558c64878 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,6 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif diff --git a/app/test-pipeline/main.c b/app/test-pipeline/main.c index 7f0d6d3f1..c7be5942f 100644 --- a/app/test-pipeline/main.c +++ b/app/test-pipeline/main.c @@ -126,7 +126,7 @@ app_lcore_main_loop(__rte_unused void *arg) return 0; case e_APP_PIPELINE_ACL: -#ifndef RTE_LIBRTE_ACL +#ifndef RTE_LIB_ACL rte_exit(EXIT_FAILURE, "ACL not present in build\n"); #else app_main_loop_worker_pipeline_acl(); diff --git a/app/test-pmd/bpf_cmd.h b/app/test-pmd/bpf_cmd.h index 5ee4c9f79..66bc70635 100644 --- a/app/test-pmd/bpf_cmd.h +++ b/app/test-pmd/bpf_cmd.h @@ -5,12 +5,12 @@ #ifndef _BPF_CMD_H_ #define _BPF_CMD_H_ -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF /* BPF CLI */ extern cmdline_parse_inst_t cmd_operate_bpf_ld_parse; extern cmdline_parse_inst_t cmd_operate_bpf_unld_parse; -#endif /* RTE_LIBRTE_BPF */ +#endif /* RTE_LIB_BPF */ #endif /* _BPF_CMD_H_ */ diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 273fb1af6..7a35a826d 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -50,20 +50,20 @@ #include <cmdline_parse_etheraddr.h> #include <cmdline_socket.h> #include <cmdline.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #include <rte_eth_bond_8023ad.h> #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA #include <rte_pmd_dpaa.h> #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include "testpmd.h" @@ -612,7 +612,7 @@ static void cmd_help_long_parsed(void *parsed_result, " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -5457,7 +5457,7 @@ cmd_set_bypass_mode_parsed(void *parsed_result, portid_t port_id = res->port_id; int32_t rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->value, "bypass")) @@ -5525,7 +5525,7 @@ cmd_set_bypass_event_parsed(void *parsed_result, struct cmd_set_bypass_event_result *res = parsed_result; portid_t port_id = res->port_id; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; @@ -5630,7 +5630,7 @@ cmd_set_bypass_timeout_parsed(void *parsed_result, { __rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS if (!strcmp(res->value, "1.5")) bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC; else if (!strcmp(res->value, "2")) @@ -5693,7 +5693,7 @@ cmd_show_bypass_config_parsed(void *parsed_result, struct cmd_show_bypass_config_result *res = parsed_result; portid_t port_id = res->port_id; int rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t event_mode; uint32_t bypass_mode; uint32_t timeout = bypass_timeout; @@ -5776,7 +5776,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = { }, }; -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND /* *** SET BONDING MODE *** */ struct cmd_set_bonding_mode_result { cmdline_fixed_string_t set; @@ -6546,7 +6546,7 @@ cmdline_parse_inst_t cmd_set_bonding_agg_mode_policy = { }; -#endif /* RTE_LIBRTE_PMD_BOND */ +#endif /* RTE_NET_BOND */ /* *** SET FORWARDING MODE *** */ struct cmd_set_fwd_mode_result { @@ -8831,12 +8831,12 @@ cmd_set_vf_rxmode_parsed(void *parsed_result, RTE_SET_USED(is_on); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); @@ -8910,12 +8910,12 @@ static void cmd_vf_mac_addr_parsed(void *parsed_result, if (strcmp(res->what, "add") != 0) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_add_vf_mac_addr(res->port_num, res->vf_num, &res->address); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_mac_addr_add(res->port_num, &res->address, res->vf_num); @@ -8986,17 +8986,17 @@ cmd_vf_rx_vlan_filter_parsed(void *parsed_result, __rte_unused int is_add = (strcmp(res->what, "add") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); @@ -9523,7 +9523,7 @@ cmd_global_config_parsed(void *parsed_result, conf.cfg.gre_key_len = res->len; ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE, RTE_ETH_FILTER_SET, &conf); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_gre_key_len(res->port_id, res->len); #endif @@ -10087,7 +10087,7 @@ cmd_queue_region_parsed(void *parsed_result, { struct cmd_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10095,7 +10095,7 @@ cmd_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_SET; region_conf.region_id = res->region_id; @@ -10186,7 +10186,7 @@ cmd_region_flowtype_parsed(void *parsed_result, { struct cmd_region_flowtype_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10194,7 +10194,7 @@ cmd_region_flowtype_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET; @@ -10277,7 +10277,7 @@ cmd_user_priority_region_parsed(void *parsed_result, { struct cmd_user_priority_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10285,7 +10285,7 @@ cmd_user_priority_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET; region_conf.user_priority = res->user_priority_id; @@ -10368,7 +10368,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, { struct cmd_flush_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10376,7 +10376,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); if (strcmp(res->what, "on") == 0) @@ -10450,7 +10450,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, { struct cmd_show_queue_region_info *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_regions rte_pmd_regions; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10458,7 +10458,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(&rte_pmd_regions, 0, sizeof(rte_pmd_regions)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET; @@ -11354,7 +11354,7 @@ cmd_flow_director_filter_parsed(void *parsed_result, } } else { if (!strcmp(res->mode_value, "raw")) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; struct rte_pmd_i40e_pkt_template_conf conf; @@ -13712,17 +13712,17 @@ cmd_set_vf_vlan_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13818,17 +13818,17 @@ cmd_set_vf_mac_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13924,17 +13924,17 @@ cmd_set_vf_vlan_stripq_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); @@ -14028,17 +14028,17 @@ cmd_set_vf_vlan_insert_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); @@ -14124,19 +14124,19 @@ cmd_set_tx_loopback_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_tx_loopback(res->port_id, is_on); #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA if (ret == -ENOTSUP) ret = rte_pmd_dpaa_set_tx_loopback(res->port_id, is_on); #endif @@ -14223,11 +14223,11 @@ cmd_set_all_queues_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_all_queues_drop_en(res->port_id, is_on); #endif @@ -14319,7 +14319,7 @@ cmd_set_vf_split_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_split_drop_en(res->port_id, res->vf_id, is_on); #endif @@ -14411,17 +14411,17 @@ cmd_set_vf_mac_addr_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); @@ -14538,7 +14538,7 @@ cmd_set_macsec_offload_on_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp); #endif } @@ -14635,7 +14635,7 @@ cmd_set_macsec_offload_off_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_disable(port_id); #endif } @@ -14721,7 +14721,7 @@ cmd_set_macsec_sc_parsed( int ret = -ENOTSUP; int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_config_txsc(res->port_id, res->mac.addr_bytes) : @@ -14840,7 +14840,7 @@ cmd_set_macsec_sa_parsed( key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1); } -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_select_txsa(res->port_id, res->idx, res->an, res->pn, key) : @@ -14937,7 +14937,7 @@ cmd_set_vf_promisc_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_unicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15027,7 +15027,7 @@ cmd_set_vf_allmulti_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_multicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15117,7 +15117,7 @@ cmd_set_vf_broadcast_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_broadcast(res->port_id, res->vf_id, is_on); #endif @@ -15211,7 +15211,7 @@ cmd_set_vf_vlan_tag_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_vlan_tag(res->port_id, res->vf_id, is_on); #endif @@ -15332,7 +15332,7 @@ cmd_vf_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_max_bw(res->port_id, res->vf_id, res->bw); #endif @@ -15432,7 +15432,7 @@ cmd_vf_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_bw_alloc(res->port_id, res->vf_id, tc_num, bw); #endif @@ -15498,7 +15498,7 @@ cmd_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_tc_bw_alloc(res->port_id, tc_num, bw); #endif @@ -15547,7 +15547,7 @@ cmd_vf_tc_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_max_bw(res->port_id, res->vf_id, res->tc_no, res->bw); #endif @@ -16601,7 +16601,7 @@ cmd_strict_link_prio_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_tc_strict_prio(res->port_id, res->tc_map); #endif @@ -16685,7 +16685,7 @@ cmd_ddp_add_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16753,7 +16753,7 @@ cmd_ddp_del_parsed( if (!buff) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16808,7 +16808,7 @@ cmd_ddp_info_parsed( uint8_t *pkg; uint32_t pkg_size; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint32_t i, j, n; uint8_t *buff; uint32_t buff_size = 0; @@ -16829,7 +16829,7 @@ cmd_ddp_info_parsed( if (!pkg) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size, (uint8_t *)&info, sizeof(info), RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER); @@ -17044,7 +17044,7 @@ cmd_ddp_get_list_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_ddp_get_list_result *res = parsed_result; struct rte_pmd_i40e_profile_list *p_list; struct rte_pmd_i40e_profile_info *p_info; @@ -17054,7 +17054,7 @@ cmd_ddp_get_list_parsed( #endif int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E size = PROFILE_INFO_SIZE * MAX_PROFILE_NUM + 4; p_list = (struct rte_pmd_i40e_profile_list *)malloc(size); if (!p_list) { @@ -17122,7 +17122,7 @@ cmd_cfg_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_cfg_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17134,7 +17134,7 @@ cmd_cfg_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17245,7 +17245,7 @@ cmd_clear_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_clear_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17257,7 +17257,7 @@ cmd_clear_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17373,13 +17373,13 @@ cmd_show_vf_stats_parsed( memset(&stats, 0, sizeof(stats)); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_get_vf_stats(res->port_id, res->vf_id, &stats); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_get_vf_stats(res->port_id, res->vf_id, @@ -17478,12 +17478,12 @@ cmd_clear_vf_stats_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_reset_vf_stats(res->port_id, res->vf_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_reset_vf_stats(res->port_id, res->vf_id); @@ -17570,7 +17570,7 @@ cmd_pctype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_reset(res->port_id); #endif @@ -17644,7 +17644,7 @@ cmd_pctype_mapping_get_parsed( { struct cmd_pctype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; int i, j, first_pctype; @@ -17653,7 +17653,7 @@ cmd_pctype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_get(res->port_id, mapping); #endif @@ -17671,7 +17671,7 @@ cmd_pctype_mapping_get_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E for (i = 0; i < RTE_PMD_I40E_FLOW_TYPE_MAX; i++) { if (mapping[i].pctype != 0ULL) { first_pctype = 1; @@ -17760,7 +17760,7 @@ cmd_pctype_mapping_update_parsed( { struct cmd_pctype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping; unsigned int i; unsigned int nb_item; @@ -17770,7 +17770,7 @@ cmd_pctype_mapping_update_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E nb_item = parse_item_list(res->pctype_list, "pctypes", RTE_PMD_I40E_PCTYPE_MAX, pctype_list, 1); mapping.flow_type = res->flow_type; @@ -17858,7 +17858,7 @@ cmd_ptype_mapping_get_parsed( { struct cmd_ptype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E int max_ptype_num = 256; struct rte_pmd_i40e_ptype_mapping mapping[max_ptype_num]; uint16_t count; @@ -17868,7 +17868,7 @@ cmd_ptype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_get(res->port_id, mapping, max_ptype_num, @@ -17889,7 +17889,7 @@ cmd_ptype_mapping_get_parsed( printf("programming error: (%s)\n", strerror(-ret)); } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!ret) { for (i = 0; i < count; i++) printf("%3d\t0x%08x\n", @@ -17967,7 +17967,7 @@ cmd_ptype_mapping_replace_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_replace(res->port_id, res->target, res->mask, @@ -18049,7 +18049,7 @@ cmd_ptype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_reset(res->port_id); #endif @@ -18126,13 +18126,13 @@ cmd_ptype_mapping_update_parsed( { struct cmd_ptype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_ptype_mapping mapping; #endif if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E mapping.hw_ptype = res->hw_ptype; mapping.sw_ptype = res->sw_ptype; ret = rte_pmd_i40e_ptype_mapping_update(res->port_id, @@ -19824,7 +19824,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, (cmdline_parse_inst_t *) &cmd_set_bonding_primary, @@ -20071,7 +20071,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_tx_offload_get_configuration, (cmdline_parse_inst_t *)&cmd_config_per_port_tx_offload, (cmdline_parse_inst_t *)&cmd_config_per_queue_tx_offload, -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF (cmdline_parse_inst_t *)&cmd_operate_bpf_ld_parse, (cmdline_parse_inst_t *)&cmd_operate_bpf_unld_parse, #endif diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 8ccd98956..91235a642 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -39,13 +39,13 @@ #include <rte_cycles.h> #include <rte_flow.h> #include <rte_errno.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include <rte_gro.h> @@ -4146,14 +4146,14 @@ get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info, return 0; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) { ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info); if (!ret) ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat); } #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) { ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info); if (!ret) @@ -4306,7 +4306,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg) void set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE int diag; if (is_rx) @@ -4361,12 +4361,12 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk) RTE_SET_USED(rate); RTE_SET_USED(q_msk); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (diag == -ENOTSUP) diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (diag == -ENOTSUP) diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif @@ -4662,7 +4662,7 @@ close_file(uint8_t *buf) void port_queue_region_info_display(portid_t port_id, void *buf) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint16_t i, j; struct rte_pmd_i40e_queue_regions *info = (struct rte_pmd_i40e_queue_regions *)buf; diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 2e8b9f8a9..7e9c7bdd6 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -25,37 +25,37 @@ sources = files('5tswap.c', 'util.c') deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci'] -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') deps += 'pdump' endif -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') +if dpdk_conf.has('RTE_LIB_LATENCYSTATS') deps += 'latencystats' endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') deps += 'net_bond' endif -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += 'net_bnxt' endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += 'net_i40e' endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif -if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') +if dpdk_conf.has('RTE_NET_DPAA') deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif -if dpdk_conf.has('RTE_LIBRTE_BPF') +if dpdk_conf.has('RTE_LIB_BPF') sources += files('bpf_cmd.c') deps += 'bpf' endif diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 1ead59579..98e6740e6 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -39,7 +39,7 @@ #include <rte_ether.h> #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #endif #include <rte_flow.h> @@ -50,7 +50,7 @@ static void usage(char* progname) { printf("usage: %s [EAL options] -- " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "[--interactive|-i] " "[--cmdline-file=FILENAME] " #endif @@ -60,7 +60,7 @@ usage(char* progname) "--portlist=PORTLIST " "--mbuf-size= | --total-num-mbufs= | " "--nb-cores= | --nb-ports= | " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "--eth-peers-configfile= | " "--eth-peer=X,M:M:M:M:M:M | " "--tx-ip=SRC,DST | --tx-udp=PORT | " @@ -73,7 +73,7 @@ usage(char* progname) "--vxlan-gpe-port= | --record-core-cycles | " "--record-burst-stats]\n", progname); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --interactive: run in interactive mode.\n"); printf(" --cmdline-file: execute cli commands before startup.\n"); #endif @@ -112,7 +112,7 @@ usage(char* progname) printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n"); printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet " "size to N bytes.\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --eth-peers-configfile=name: config file with ethernet addresses " "of peer ports.\n"); printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer " @@ -129,7 +129,7 @@ usage(char* progname) "the packet will be enqueued into the rx drop-queue. " "If the drop-queue doesn't exist, the packet is dropped. " "By default drop-queue=127.\n"); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS printf(" --latencystats=N: enable latency and jitter statistcs " "monitoring on forwarding lcore id N.\n"); #endif @@ -223,7 +223,7 @@ usage(char* progname) printf(" --record-burst-stats: enable display of RX and TX bursts.\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE static int init_peer_eth_addrs(char *config_filename) { @@ -586,7 +586,7 @@ launch_args_parse(int argc, char** argv) static struct option lgopts[] = { { "help", 0, 0, 0 }, -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE { "interactive", 0, 0, 0 }, { "cmdline-file", 1, 0, 0 }, { "auto-start", 0, 0, 0 }, @@ -615,10 +615,10 @@ launch_args_parse(int argc, char** argv) { "pkt-filter-report-hash", 1, 0, 0 }, { "pkt-filter-size", 1, 0, 0 }, { "pkt-filter-drop-queue", 1, 0, 0 }, -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS { "latencystats", 1, 0, 0 }, #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS { "bitrate-stats", 1, 0, 0 }, #endif { "disable-crc-strip", 0, 0, 0 }, @@ -691,7 +691,7 @@ launch_args_parse(int argc, char** argv) argvopt = argv; -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #define SHORTOPTS "i" #else #define SHORTOPTS "" @@ -699,7 +699,7 @@ launch_args_parse(int argc, char** argv) while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah", lgopts, &opt_idx)) != EOF) { switch (opt) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE case 'i': printf("Interactive-mode selected\n"); interactive = 1; @@ -715,7 +715,7 @@ launch_args_parse(int argc, char** argv) usage(argv[0]); rte_exit(EXIT_SUCCESS, "Displayed help\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (!strcmp(lgopts[opt_idx].name, "interactive")) { printf("Interactive-mode selected\n"); interactive = 1; @@ -982,7 +982,7 @@ launch_args_parse(int argc, char** argv) "drop queue %d invalid - must" "be >= 0 \n", n); } -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (!strcmp(lgopts[opt_idx].name, "latencystats")) { n = atoi(optarg); @@ -995,7 +995,7 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) { n = atoi(optarg); if (n >= 0) { diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index ccba71c07..8efe06c64 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -46,18 +46,18 @@ #include <rte_ethdev.h> #include <rte_dev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include <rte_pdump.h> #endif #include <rte_flow.h> #include <rte_metrics.h> -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS #include <rte_bitrate.h> #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS #include <rte_latencystats.h> #endif @@ -404,13 +404,13 @@ int do_mlockall = 0; * NIC bypass mode configuration options. */ -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS /* The NIC bypass watchdog timeout. */ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS /* * Set when latency stats is enabled in the commandline @@ -488,7 +488,7 @@ uint8_t record_burst_stats; unsigned int num_sockets = 0; unsigned int socket_ids[RTE_MAX_NUMA_NODES]; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS /* Bitrate statistics */ struct rte_stats_bitrates *bitrate_data; lcoreid_t bitrate_lcore_id; @@ -2064,7 +2064,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; @@ -2079,7 +2079,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0 && bitrate_lcore_id == rte_lcore_id()) { tics_current = rte_rdtsc(); @@ -2092,7 +2092,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) } } #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0 && latencystats_lcore_id == rte_lcore_id()) rte_latencystats_update(); @@ -3347,7 +3347,7 @@ init_port_config(void) return; map_port_queue_stats_mapping_registers(pid, port); -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS rte_pmd_ixgbe_bypass_init(pid); #endif @@ -3613,11 +3613,11 @@ signal_handler(int signum) if (signum == SIGINT || signum == SIGTERM) { printf("\nSignal %d received, preparing to exit...\n", signum); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* uninitialize packet capture framework */ rte_pdump_uninit(); #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif @@ -3659,7 +3659,7 @@ main(int argc, char** argv) if (ret != 0) rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* initialize packet capture framework */ rte_pdump_init(); #endif @@ -3682,10 +3682,10 @@ main(int argc, char** argv) "Check the core mask argument\n"); /* Bitrate/latency stats disabled by default */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS bitrate_enabled = 0; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS latencystats_enabled = 0; #endif @@ -3764,7 +3764,7 @@ main(int argc, char** argv) /* Init metrics library */ rte_metrics_init(rte_socket_id()); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) { int ret = rte_latencystats_init(1, NULL); if (ret) @@ -3776,7 +3776,7 @@ main(int argc, char** argv) #endif /* Setup bitrate stats */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0) { bitrate_data = rte_stats_bitrate_create(); if (bitrate_data == NULL) @@ -3786,7 +3786,7 @@ main(int argc, char** argv) } #endif -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (strlen(cmdline_filename) != 0) cmdline_read_from_file(cmdline_filename); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 227b69420..e447122d3 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -398,12 +398,12 @@ extern uint32_t param_total_num_mbufs; extern uint16_t stats_period; -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS extern uint8_t latencystats_enabled; extern lcoreid_t latencystats_lcore_id; #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS extern lcoreid_t bitrate_lcore_id; extern uint8_t bitrate_enabled; #endif diff --git a/app/test/meson.build b/app/test/meson.build index c5ce1d2c0..f0e404156 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -338,23 +338,23 @@ dump_test_names = [ # unit tests without requiring that the developer install the # DPDK libraries. Explicit linkage of drivers (plugin libraries) # in applications should not be used. -if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_RING') test_deps += 'mempool_ring' endif -if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_STACK') test_deps += 'mempool_stack' endif -if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') +if dpdk_conf.has('RTE_EVENT_SKELETON') test_deps += 'event_skeleton' endif -if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') +if dpdk_conf.has('RTE_LIB_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] fast_tests += [['telemetry_json_autotest', true], ['telemetry_data_autotest', true]] endif # The following linkages of drivers are required because # they are used via a driver-specific API. -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] @@ -363,7 +363,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') driver_test_names += 'link_bonding_mode4_autotest' endif endif -if dpdk_conf.has('RTE_LIBRTE_RING_PMD') +if dpdk_conf.has('RTE_NET_RING') test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' @@ -380,13 +380,13 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD') fast_tests += [['pdump_autotest', true]] endif -if dpdk_conf.has('RTE_LIBRTE_POWER') +if dpdk_conf.has('RTE_LIB_POWER') test_deps += 'power' endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') test_deps += 'kni' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') test_deps += 'pdump' endif @@ -403,7 +403,7 @@ cflags += '-fno-strict-aliasing' cflags += ['-DALLOW_INTERNAL_API'] test_dep_objs = [] -if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') +if dpdk_conf.has('RTE_LIB_COMPRESSDEV') compress_test_dep = dependency('zlib', required: false) if compress_test_dep.found() test_dep_objs += compress_test_dep @@ -413,7 +413,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') endif endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' test_deps += 'crypto_scheduler' endif diff --git a/app/test/process.h b/app/test/process.h index c3b378033..27f1b1c0e 100644 --- a/app/test/process.h +++ b/app/test/process.h @@ -24,8 +24,8 @@ #define exe "exe" #endif -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING #include <pthread.h> extern void *send_pkts(void *empty); extern uint16_t flag_for_send_pkts; @@ -45,8 +45,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) char *argv_cpy[numargs + 1]; int i, status; char path[32]; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING pthread_t thread; #endif #endif @@ -124,8 +124,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) } } /* parent process does a wait */ -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) pthread_create(&thread, NULL, &send_pkts, NULL); #endif @@ -133,8 +133,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) while (wait(&status) != pid) ; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) { flag_for_send_pkts = 0; pthread_join(thread, NULL); diff --git a/app/test/test.c b/app/test/test.c index 94d26ab1f..afabfe42f 100644 --- a/app/test/test.c +++ b/app/test/test.c @@ -12,7 +12,7 @@ #include <ctype.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #include <cmdline_rdline.h> #include <cmdline_parse.h> #include <cmdline_socket.h> @@ -25,12 +25,12 @@ extern cmdline_parse_ctx_t main_ctx[]; #include <rte_cycles.h> #include <rte_log.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER #include <rte_timer.h> #endif #include "test.h" -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include "test_pdump.h" #endif @@ -52,8 +52,8 @@ do_recursive_call(void) int (*action_fn)(void); } actions[] = { { "run_secondary_instances", test_mp_secondary }, -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING { "run_pdump_server_tests", test_pdump }, #endif #endif @@ -69,7 +69,7 @@ do_recursive_call(void) { "test_memory_flags", no_action }, { "test_file_prefix", no_action }, { "test_no_huge_flag", no_action }, -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER { "timer_secondary_spawn_wait", test_timer_secondary }, #endif }; @@ -91,7 +91,7 @@ int last_test_result; int main(int argc, char **argv) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE struct cmdline *cl; #endif char *extra_args; @@ -134,7 +134,7 @@ main(int argc, char **argv) goto out; } -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER if (rte_timer_subsystem_init() < 0) { ret = -1; goto out; @@ -163,7 +163,7 @@ main(int argc, char **argv) "HPET is not enabled, using TSC as default timer\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE cl = cmdline_stdin_new(main_ctx, "RTE>>"); if (cl == NULL) { ret = -1; @@ -191,7 +191,7 @@ main(int argc, char **argv) ret = 0; out: -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER rte_timer_subsystem_finalize(); #endif rte_eal_cleanup(); diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 153d00119..687a8830a 100644 --- a/app/test/test_cryptodev.c +++ b/app/test/test_cryptodev.c @@ -18,7 +18,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #include <rte_cryptodev_scheduler_operations.h> #endif @@ -40,7 +40,7 @@ #include "test_cryptodev_aead_test_vectors.h" #include "test_cryptodev_hmac_test_vectors.h" #include "test_cryptodev_mixed_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "test_cryptodev_security_pdcp_test_vectors.h" #include "test_cryptodev_security_pdcp_test_func.h" #include "test_cryptodev_security_docsis_test_vectors.h" @@ -74,17 +74,17 @@ struct crypto_unittest_params { struct rte_crypto_sym_xform cipher_xform; struct rte_crypto_sym_xform auth_xform; struct rte_crypto_sym_xform aead_xform; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_docsis_xform docsis_xform; #endif union { struct rte_cryptodev_sym_session *sess; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_session *sec_session; #endif }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_action_type type; #endif struct rte_crypto_op *op; @@ -475,7 +475,7 @@ testsuite_setup(void) } } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER char vdev_args[VDEV_ARGS_SIZE] = {""}; char temp_str[VDEV_ARGS_SIZE] = {"mode=multi-core," "ordering=enable,name=cryptodev_test_scheduler,corelist="}; @@ -522,7 +522,7 @@ testsuite_setup(void) i, RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); } } -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { @@ -695,7 +695,7 @@ ut_teardown(void) struct rte_cryptodev_stats stats; /* free crypto session structure */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ut_params->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) { if (ut_params->sec_session) { rte_security_session_destroy(rte_cryptodev_get_sec_ctx @@ -7085,7 +7085,7 @@ test_authenticated_encryption(const struct aead_test_data *tdata) } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int security_proto_supported(enum rte_security_session_action_type action, enum rte_security_session_protocol proto) @@ -11710,7 +11710,7 @@ test_chacha20_poly1305_decrypt_test_case_rfc8439(void) return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* global AESNI slave IDs for the scheduler test */ uint8_t aesni_ids[2]; @@ -11930,7 +11930,7 @@ static struct unit_test_suite cryptodev_scheduler_testsuite = { } }; -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ static struct unit_test_suite cryptodev_testsuite = { .suite_name = "Crypto Unit Test Suite", @@ -12551,7 +12551,7 @@ static struct unit_test_suite cryptodev_testsuite = { TEST_CASE_ST(ut_setup, ut_teardown, test_verify_auth_aes_cmac_cipher_null_test_case_1), -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY TEST_CASE_ST(ut_setup_security, ut_teardown, test_PDCP_PROTO_all), TEST_CASE_ST(ut_setup_security, ut_teardown, @@ -12877,7 +12877,7 @@ test_cryptodev_mrvl(void) return unit_test_suite_runner(&cryptodev_mrvl_testsuite); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER static int test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/) diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h index d11d7cee7..e261dfe36 100644 --- a/app/test/test_cryptodev_hash_test_vectors.h +++ b/app/test/test_cryptodev_hash_test_vectors.h @@ -5,7 +5,7 @@ #ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ #define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ -#ifdef RTE_LIBRTE_PMD_AESNI_MB +#ifdef RTE_CRYPTO_AESNI_MB #include <intel-ipsec-mb.h> #endif diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c index b019656b2..fc7d1a2f0 100644 --- a/app/test/test_eal_flags.c +++ b/app/test/test_eal_flags.c @@ -344,7 +344,7 @@ test_invalid_b_flag(void) static int test_invalid_vdev_flag(void) { -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING #ifdef RTE_EXEC_ENV_FREEBSD /* BSD target doesn't support prefixes at this point, and we also need to * run another primary process here */ @@ -1504,7 +1504,7 @@ test_eal_flags(void) return ret; } -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING ret = test_invalid_vdev_flag(); if (ret < 0) { printf("Error in test_invalid_vdev_flag()\n"); diff --git a/app/test/test_func_reentrancy.c b/app/test/test_func_reentrancy.c index f5ddd03d7..2a0c134a9 100644 --- a/app/test/test_func_reentrancy.c +++ b/app/test/test_func_reentrancy.c @@ -27,15 +27,15 @@ #include <rte_spinlock.h> #include <rte_malloc.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> #include <rte_jhash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -200,7 +200,7 @@ mempool_create_lookup(__rte_unused void *arg) return 0; } -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH static void hash_clean(unsigned lcore_id) { @@ -328,9 +328,9 @@ fbk_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM static void lpm_clean(unsigned int lcore_id) { @@ -388,7 +388,7 @@ lpm_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ struct test_case{ case_func_t func; @@ -403,13 +403,13 @@ struct test_case test_cases[] = { { ring_create_lookup, NULL, ring_clean, "ring create/lookup" }, { mempool_create_lookup, NULL, mempool_clean, "mempool create/lookup" }, -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH { hash_create_free, NULL, hash_clean, "hash create/free" }, { fbk_create_free, NULL, fbk_clean, "fbk create/free" }, -#endif /* RTE_LIBRTE_HASH */ -#ifdef RTE_LIBRTE_LPM +#endif /* RTE_LIB_HASH */ +#ifdef RTE_LIB_LPM { lpm_create_free, NULL, lpm_clean, "lpm create/free" }, -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ }; /** diff --git a/app/test/test_kni.c b/app/test/test_kni.c index e47ab36e0..402f17064 100644 --- a/app/test/test_kni.c +++ b/app/test/test_kni.c @@ -11,7 +11,7 @@ #include "test.h" -#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI) +#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI) static int test_kni(void) diff --git a/app/test/test_mp_secondary.c b/app/test/test_mp_secondary.c index 3a655c340..e1a7b4ae4 100644 --- a/app/test/test_mp_secondary.c +++ b/app/test/test_mp_secondary.c @@ -34,14 +34,14 @@ #include <rte_log.h> #include <rte_mempool.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -157,7 +157,7 @@ run_object_creation_tests(void) } printf("# Checked rte_mempool_create() OK\n"); -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH const struct rte_hash_parameters hash_params = { .name = "test_mp_hash" }; rte_errno=0; if ((rte_hash_create(&hash_params) != NULL) && @@ -177,7 +177,7 @@ run_object_creation_tests(void) printf("# Checked rte_fbk_hash_create() OK\n"); #endif -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM rte_errno=0; struct rte_lpm_config config; diff --git a/app/test/test_power.c b/app/test/test_power.c index 0c597c33f..da1d67c0a 100644 --- a/app/test/test_power.c +++ b/app/test/test_power.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power(void) diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c index d203810da..731c6b4dc 100644 --- a/app/test/test_power_cpufreq.c +++ b/app/test/test_power_cpufreq.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_cpufreq(void) diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c index 785cd048d..cc66b7a8a 100644 --- a/app/test/test_power_kvm_vm.c +++ b/app/test/test_power_kvm_vm.c @@ -10,7 +10,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_kvm_vm(void) diff --git a/app/test/test_table.c b/app/test/test_table.c index bc8d8a2e1..95034148c 100644 --- a/app/test/test_table.c +++ b/app/test/test_table.c @@ -180,7 +180,7 @@ test_table(void) } } -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL printf("\n\n\n\n************ACL tests************\n"); if (test_table_acl() < 0) { ret = TEST_FAILED; diff --git a/app/test/test_table.h b/app/test/test_table.h index 43b885587..209bdbff2 100644 --- a/app/test/test_table.h +++ b/app/test/test_table.h @@ -10,7 +10,7 @@ #include <rte_table_array.h> #include <rte_pipeline.h> -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL #include <rte_table_acl.h> #endif diff --git a/app/test/test_table_combined.h b/app/test/test_table_combined.h index d05866240..fb94dbb94 100644 --- a/app/test/test_table_combined.h +++ b/app/test/test_table_combined.h @@ -6,7 +6,7 @@ int test_table_stub_combined(void); int test_table_lpm_combined(void); int test_table_lpm_ipv6_combined(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash8unoptimized(void); diff --git a/app/test/test_table_tables.h b/app/test/test_table_tables.h index 7570e9963..530633a01 100644 --- a/app/test/test_table_tables.h +++ b/app/test/test_table_tables.h @@ -7,7 +7,7 @@ int test_table_hash_cuckoo(void); int test_table_lpm(void); int test_table_lpm_ipv6(void); int test_table_array(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash_unoptimized(void); diff --git a/config/arm/meson.build b/config/arm/meson.build index 344457e8a..b49203fa8 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -21,9 +21,9 @@ flags_common_default = [ # ['RTE_ARM64_MEMCPY_ALIGN_MASK', 0xF], # ['RTE_ARM64_MEMCPY_STRICT_ALIGN', false], - ['RTE_LIBRTE_FM10K_PMD', false], - ['RTE_LIBRTE_SFC_EFX_PMD', false], - ['RTE_LIBRTE_AVP_PMD', false], + ['RTE_NET_FM10K', false], + ['RTE_NET_SFC_EFX', false], + ['RTE_NET_AVP', false], ['RTE_SCHED_VECTOR', false], ['RTE_ARM_USE_WFE', false], diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c index b0055b164..1a9dd18b9 100644 --- a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c +++ b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c @@ -120,7 +120,7 @@ dpaa2_core_cluster_sdest(int cpu_id) return dpaa2_core_cluster_base + x; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 static void dpaa2_affine_dpio_intr_to_respective_core(int32_t dpio_id, int cpu_id) { @@ -242,7 +242,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) return -1; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 if (dpaa2_dpio_intr_init(dpio_dev, cpu_id)) { DPAA2_BUS_ERR("Interrupt registration failed for dpio"); return -1; @@ -255,7 +255,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) static void dpaa2_put_qbman_swp(struct dpaa2_dpio_dev *dpio_dev) { if (dpio_dev) { -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 dpaa2_dpio_intr_deinit(dpio_dev); #endif rte_atomic16_clear(&dpio_dev->ref_count); diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h index 1c07f2233..0444b50a1 100644 --- a/drivers/compress/qat/qat_comp.h +++ b/drivers/compress/qat/qat_comp.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_H_ #define _QAT_COMP_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h index ed2712060..252b4b24e 100644 --- a/drivers/compress/qat/qat_comp_pmd.h +++ b/drivers/compress/qat/qat_comp_pmd.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_PMD_H_ #define _QAT_COMP_PMD_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h index e0c7b4f7c..8e9b8bca2 100644 --- a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h +++ b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h @@ -7,7 +7,7 @@ #include <intel-ipsec-mb.h> -#if defined(RTE_LIBRTE_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) +#if defined(RTE_LIB_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) #define AESNI_MB_DOCSIS_SEC_ENABLED 1 #include <rte_security.h> #include <rte_security_driver.h> diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c index 109e61ae1..41401c6f0 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -58,7 +58,7 @@ static uint8_t cryptodev_driver_id; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline int build_proto_compound_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, @@ -1355,7 +1355,7 @@ build_sec_fd(struct rte_crypto_op *op, if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) sess = (dpaa2_sec_session *)get_sym_session_private_data( op->sym->session, cryptodev_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) sess = (dpaa2_sec_session *)get_sec_session_private_data( op->sym->sec_session); @@ -1383,7 +1383,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_sg_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: case DPAA2_SEC_PDCP: ret = build_proto_compound_sg_fd(sess, op, fd, bpid); @@ -1407,7 +1407,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: ret = build_proto_fd(sess, op, fd, bpid); break; @@ -1522,7 +1522,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, return num_tx; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct rte_crypto_op * sec_simple_fd_to_mbuf(const struct qbman_fd *fd) { @@ -1561,7 +1561,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) struct ctxt_priv *priv; struct rte_mbuf *dst, *src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single) return sec_simple_fd_to_mbuf(fd); #endif @@ -1594,7 +1594,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) } else dst = src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { uint16_t len = DPAA2_GET_FD_LEN(fd); dst->pkt_len = len; @@ -2539,7 +2539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev, return ret; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, dpaa2_sec_session *session, @@ -3698,7 +3698,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa2_sec_sym_session_clear, }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa2_sec_capabilities_get(void *device __rte_unused) { @@ -3736,7 +3736,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) struct dpaa2_sec_dev_private *internals; struct rte_device *dev = cryptodev->device; struct rte_dpaa2_device *dpaa2_dev; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct fsl_mc_io *dpseci; @@ -3775,7 +3775,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA2_SEC_DEBUG("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h index 528b64ef8..5d9cf12c4 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h @@ -8,7 +8,7 @@ #ifndef _DPAA2_SEC_PMD_PRIVATE_H_ #define _DPAA2_SEC_PMD_PRIVATE_H_ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -141,7 +141,7 @@ struct dpaa2_sec_aead_ctxt { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * The structure is to be filled by user for PDCP Protocol */ @@ -193,7 +193,7 @@ typedef struct dpaa2_sec_session_entry { struct dpaa2_sec_aead_ctxt aead_ctxt; } ext_params; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct dpaa2_pdcp_ctxt pdcp; #endif }; @@ -550,7 +550,7 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c index 97002170b..c4d1747a7 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.c +++ b/drivers/crypto/dpaa_sec/dpaa_sec.c @@ -15,7 +15,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif #include <rte_cycles.h> @@ -229,7 +229,7 @@ static inline int is_decode(dpaa_sec_session *ses) return ses->dir == DIR_DEC; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses) { @@ -408,7 +408,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses) memset(cdb, 0, sizeof(struct sec_cdb)); switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_IPSEC: shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses); break; @@ -1539,7 +1539,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses) return cf; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct dpaa_sec_job * build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses) { @@ -1714,7 +1714,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, op->sym->session, cryptodev_driver_id); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case RTE_CRYPTO_OP_SECURITY_SESSION: ses = (dpaa_sec_session *) get_sec_session_private_data( @@ -1761,7 +1761,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((op->sym->m_dst == NULL) || rte_pktmbuf_is_contiguous(op->sym->m_dst))) { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto(op, ses); @@ -1795,7 +1795,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, } } else { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto_sg(op, ses); @@ -1852,7 +1852,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((auth_tail_len << 16) | auth_hdr_len); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* In case of PDCP, per packet HFN is stored in * mbuf priv after sym_op. */ @@ -2467,7 +2467,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev, } } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, struct rte_security_ipsec_xform *ipsec_xform, @@ -3271,7 +3271,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa_sec_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa_sec_capabilities_get(void *device __rte_unused) { @@ -3310,7 +3310,7 @@ static int dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) { struct dpaa_sec_dev_private *internals; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct dpaa_sec_qp *qp; @@ -3347,7 +3347,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA_SEC_WARN("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h index 2cd50cc8d..45ae53499 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.h +++ b/drivers/crypto/dpaa_sec/dpaa_sec.h @@ -98,7 +98,7 @@ struct sec_cdb { uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE]; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /*! * The structure is to be filled by user as a part of * dpaa_sec_proto_ctxt for PDCP Protocol @@ -125,7 +125,7 @@ typedef struct dpaa_sec_session_entry { enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/ enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/ enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/ #endif union { @@ -168,7 +168,7 @@ typedef struct dpaa_sec_session_entry { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct sec_pdcp_ctxt pdcp; #endif }; @@ -568,7 +568,7 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c index e3f98a76b..4b7676deb 100644 --- a/drivers/crypto/qat/qat_sym.c +++ b/drivers/crypto/qat/qat_sym.c @@ -180,7 +180,7 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg, } else if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { ctx = (struct qat_sym_session *)get_sym_session_private_data( op->sym->session, qat_sym_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY } else { ctx = (struct qat_sym_session *)get_sec_session_private_data( op->sym->sec_session); diff --git a/drivers/crypto/qat/qat_sym.h b/drivers/crypto/qat/qat_sym.h index 1a9748849..da67a56b3 100644 --- a/drivers/crypto/qat/qat_sym.h +++ b/drivers/crypto/qat/qat_sym.h @@ -6,7 +6,7 @@ #define _QAT_SYM_H_ #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_net_crc.h> #endif @@ -135,7 +135,7 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx, return sym_op->cipher.data.length - last_block_len; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op) { @@ -231,7 +231,7 @@ qat_sym_process_response(void **op, uint8_t *resp) rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; } else { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t is_docsis_sec = 0; if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { @@ -256,7 +256,7 @@ qat_sym_process_response(void **op, uint8_t *resp) if (sess->bpi_ctx) { qat_bpicipher_postprocess(sess, rx_op); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (is_docsis_sec) qat_crc_verify(sess, rx_op); #endif diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h index 4ee798992..f7cab2f47 100644 --- a/drivers/crypto/qat/qat_sym_capabilities.h +++ b/drivers/crypto/qat/qat_sym_capabilities.h @@ -731,7 +731,7 @@ }, } \ } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define QAT_SECURITY_SYM_CAPABILITIES \ { /* AES DOCSIS BPI */ \ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c index 314742f53..a291004cf 100644 --- a/drivers/crypto/qat/qat_sym_pmd.c +++ b/drivers/crypto/qat/qat_sym_pmd.c @@ -8,7 +8,7 @@ #include <rte_malloc.h> #include <rte_pci.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -39,7 +39,7 @@ static const struct rte_cryptodev_capabilities qat_gen3_sym_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities qat_security_sym_capabilities[] = { QAT_SECURITY_SYM_CAPABILITIES, @@ -261,7 +261,7 @@ static struct rte_cryptodev_ops crypto_qat_ops = { .sym_session_clear = qat_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * qat_security_cap_get(void *device __rte_unused) { @@ -385,7 +385,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, "QAT_SYM_CAPA_GEN_%d", qat_pci_dev->qat_dev_gen); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; security_instance = rte_malloc("qat_sec", sizeof(struct rte_security_ctx), @@ -462,7 +462,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, return 0; error: -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif @@ -487,7 +487,7 @@ qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev) /* free crypto device */ cryptodev = rte_cryptodev_pmd_get_dev(qat_pci_dev->sym_dev->sym_dev_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h index f32a77e60..e0992cbe2 100644 --- a/drivers/crypto/qat/qat_sym_pmd.h +++ b/drivers/crypto/qat/qat_sym_pmd.h @@ -9,7 +9,7 @@ #include <rte_ether.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c index ed4d00159..23d059bf8 100644 --- a/drivers/crypto/qat/qat_sym_session.c +++ b/drivers/crypto/qat/qat_sym_session.c @@ -14,7 +14,7 @@ #include <rte_log.h> #include <rte_malloc.h> #include <rte_crypto_sym.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -2109,7 +2109,7 @@ int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int qat_sec_session_check_docsis(struct rte_security_session_conf *conf) { diff --git a/drivers/crypto/qat/qat_sym_session.h b/drivers/crypto/qat/qat_sym_session.h index 9f1033baf..011e5bb7a 100644 --- a/drivers/crypto/qat/qat_sym_session.h +++ b/drivers/crypto/qat/qat_sym_session.h @@ -6,7 +6,7 @@ #include <rte_crypto.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -159,7 +159,7 @@ qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg); int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY int qat_security_session_create(void *dev, struct rte_security_session_conf *conf, struct rte_security_session *sess, struct rte_mempool *mempool); diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b98e210e..7cdb4dfe6 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -33,7 +33,7 @@ #include <rte_random.h> #include <rte_dev.h> #include <rte_hash_crc.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -1151,7 +1151,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) /* Unlock any pending hardware semaphore */ ixgbe_swfw_lock_reset(hw); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ if (ixgbe_ipsec_ctx_create(eth_dev)) return -ENOMEM; @@ -3053,7 +3053,7 @@ ixgbe_dev_close(struct rte_eth_dev *dev) /* Remove all Traffic Manager configuration */ ixgbe_tm_conf_uninit(dev); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(dev->security_ctx); #endif diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 9bdef87fb..33905f713 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -12,7 +12,7 @@ #include "base/ixgbe_dcb_82599.h" #include "base/ixgbe_dcb_82598.h" #include "ixgbe_bypass.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "ixgbe_ipsec.h" #endif #include <rte_flow.h> @@ -494,7 +494,7 @@ struct ixgbe_adapter { struct ixgbe_filter_info filter; struct ixgbe_l2_tn_info l2_tn; struct ixgbe_bw_conf bw_conf; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct ixgbe_ipsec ipsec; #endif bool rx_bulk_alloc_allowed; diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index b2a2bfc02..6b3dea46e 100644 --- a/drivers/net/ixgbe/ixgbe_flow.c +++ b/drivers/net/ixgbe/ixgbe_flow.c @@ -215,7 +215,7 @@ cons_parse_ntuple_filter(const struct rte_flow_attr *attr, memset(ð_null, 0, sizeof(struct rte_flow_item_eth)); memset(&vlan_null, 0, sizeof(struct rte_flow_item_vlan)); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /** * Special case for flow action type RTE_FLOW_ACTION_TYPE_SECURITY */ @@ -629,7 +629,7 @@ ixgbe_parse_ntuple_filter(struct rte_eth_dev *dev, if (ret) return ret; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (filter->proto == IPPROTO_ESP) return 0; @@ -3057,7 +3057,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev, ret = ixgbe_parse_ntuple_filter(dev, attr, pattern, actions, &ntuple_filter, error); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (ntuple_filter.proto == IPPROTO_ESP) return flow; diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 29d385c06..cc861187d 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -452,7 +452,7 @@ ixgbe_set_xmit_ctx(struct ixgbe_tx_queue *txq, seqnum_seed |= tx_offload.l2_len << IXGBE_ADVTXD_TUNNEL_LEN; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ol_flags & PKT_TX_SEC_OFFLOAD) { union ixgbe_crypto_tx_desc_md *md = (union ixgbe_crypto_tx_desc_md *)mdata; @@ -645,7 +645,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint32_t ctx = 0; uint32_t new_ctx; union ixgbe_tx_offload tx_offload; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec; #endif @@ -675,7 +675,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, * are needed for offload functionality. */ ol_flags = tx_pkt->ol_flags; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY use_ipsec = txq->using_ipsec && (ol_flags & PKT_TX_SEC_OFFLOAD); #endif @@ -689,7 +689,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, tx_offload.tso_segsz = tx_pkt->tso_segsz; tx_offload.outer_l2_len = tx_pkt->outer_l2_len; tx_offload.outer_l3_len = tx_pkt->outer_l3_len; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) { union ixgbe_crypto_tx_desc_md *ipsec_mdata = (union ixgbe_crypto_tx_desc_md *) @@ -876,7 +876,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, } olinfo_status |= (pkt_len << IXGBE_ADVTXD_PAYLEN_SHIFT); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) olinfo_status |= IXGBE_ADVTXD_POPTS_IPSEC; #endif @@ -1460,7 +1460,7 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status) pkt_flags |= PKT_RX_EIP_CKSUM_BAD; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (rx_status & IXGBE_RXD_STAT_SECP) { pkt_flags |= PKT_RX_SEC_OFFLOAD; if (rx_status & IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG) @@ -2400,7 +2400,7 @@ ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt) { struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue; if (txq->offloads == 0 && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) { @@ -2496,7 +2496,7 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq) { /* Use a simple Tx queue (no offloads, no multi segs) if possible */ if ((txq->offloads == 0) && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { @@ -2555,7 +2555,7 @@ ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) tx_offload_capa |= DEV_TX_OFFLOAD_SECURITY; #endif @@ -2723,7 +2723,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, txq->offloads = offloads; txq->ops = &def_txq_ops; txq->tx_deferred_start = tx_conf->tx_deferred_start; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY txq->using_ipsec = !!(dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_SECURITY); #endif @@ -3006,7 +3006,7 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) offloads |= DEV_RX_OFFLOAD_SECURITY; #endif @@ -4835,7 +4835,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev) struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i]; rxq->rx_using_sse = rx_using_sse; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rxq->using_ipsec = !!(dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY); #endif @@ -5347,7 +5347,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev) ixgbe_setup_loopback_link_x540_x550(hw, true); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if ((dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY) || (dev->data->dev_conf.txmode.offloads & diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h index 0b5589ef4..6d2f7c9da 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.h +++ b/drivers/net/ixgbe/ixgbe_rxtx.h @@ -113,7 +113,7 @@ struct ixgbe_rx_queue { uint16_t rx_free_trigger; /**< triggers rx buffer allocation */ uint8_t rx_using_sse; /**< indicates that vector RX is in use */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec RX feature is in use */ #endif @@ -161,7 +161,7 @@ union ixgbe_tx_offload { /* fields for TX offloading of tunnels */ uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */ uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* inline ipsec related*/ uint64_t sa_idx:8; /**< TX SA database entry index */ uint64_t sec_pad_len:4; /**< padding length */ @@ -230,7 +230,7 @@ struct ixgbe_tx_queue { struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM]; const struct ixgbe_txq_ops *ops; /**< txq ops */ uint8_t tx_deferred_start; /**< not in global dev start. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec TX feature is in use */ #endif diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c index e77a7f31c..586a26180 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c +++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c @@ -93,7 +93,7 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq) IXGBE_PCI_REG_WC_WRITE(rxq->rdt_reg_addr, rx_id); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void desc_to_olflags_v_ipsec(__m128i descs[4], struct rte_mbuf **rx_pkts) { @@ -318,7 +318,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, volatile union ixgbe_adv_rx_desc *rxdp; struct ixgbe_rx_entry *sw_ring; uint16_t nb_pkts_recd; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec = rxq->using_ipsec; #endif int pos; @@ -484,7 +484,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, /* set ol_flags with vlan packet type */ desc_to_olflags_v(descs, mbuf_init, vlan_flags, &rx_pkts[pos]); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (unlikely(use_ipsec)) desc_to_olflags_v_ipsec(descs, &rx_pkts[pos]); #endif diff --git a/drivers/net/kni/meson.build b/drivers/net/kni/meson.build index 0539b4768..d9fa898d1 100644 --- a/drivers/net/kni/meson.build +++ b/drivers/net/kni/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Intel Corporation # this driver can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') reason = 'missing dependency, DPDK KNI library' sources = files('rte_eth_kni.c') deps += 'kni' diff --git a/drivers/net/netvsc/meson.build b/drivers/net/netvsc/meson.build index e7f449302..f3f52f732 100644 --- a/drivers/net/netvsc/meson.build +++ b/drivers/net/netvsc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Microsoft Corporation -build = dpdk_conf.has('RTE_LIBRTE_VMBUS_BUS') +build = dpdk_conf.has('RTE_BUS_VMBUS') reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') diff --git a/drivers/net/vhost/meson.build b/drivers/net/vhost/meson.build index d7930862a..963b30f20 100644 --- a/drivers/net/vhost/meson.build +++ b/drivers/net/vhost/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('rte_eth_vhost.c') install_headers('rte_eth_vhost.h') diff --git a/drivers/raw/dpaa2_cmdif/meson.build b/drivers/raw/dpaa2_cmdif/meson.build index e7656a3cd..06c0fe756 100644 --- a/drivers/raw/dpaa2_cmdif/meson.build +++ b/drivers/raw/dpaa2_cmdif/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') diff --git a/drivers/raw/dpaa2_qdma/meson.build b/drivers/raw/dpaa2_qdma/meson.build index b9b08153a..3eeab0d1c 100644 --- a/drivers/raw/dpaa2_qdma/meson.build +++ b/drivers/raw/dpaa2_qdma/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') diff --git a/drivers/raw/ifpga/base/opae_osdep.h b/drivers/raw/ifpga/base/opae_osdep.h index 416cef01c..18e6a11aa 100644 --- a/drivers/raw/ifpga/base/opae_osdep.h +++ b/drivers/raw/ifpga/base/opae_osdep.h @@ -8,7 +8,7 @@ #include <string.h> #include <stdbool.h> -#ifdef RTE_LIBRTE_EAL +#ifdef RTE_LIB_EAL #include "osdep_rte/osdep_generic.h" #else #include "osdep_raw/osdep_generic.h" diff --git a/drivers/vdpa/ifc/meson.build b/drivers/vdpa/ifc/meson.build index b179987f9..9d256af4b 100644 --- a/drivers/vdpa/ifc/meson.build +++ b/drivers/vdpa/ifc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build index 9fec7f883..5244cd4ff 100644 --- a/examples/distributor/meson.build +++ b/examples/distributor/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # require the power library -build = dpdk_conf.has('RTE_LIBRTE_POWER') +build = dpdk_conf.has('RTE_LIB_POWER') allow_experimental_apis = true deps += ['distributor', 'power'] diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c index db8150efd..13f9ba379 100644 --- a/examples/ethtool/lib/rte_ethtool.c +++ b/examples/ethtool/lib/rte_ethtool.c @@ -9,7 +9,7 @@ #include <rte_ethdev.h> #include <rte_ether.h> #include <rte_bus_pci.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif #include "rte_ethtool.h" @@ -395,7 +395,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id) /* Set VF vf_rx_mode, VF unsupport status is discard */ for (vf = 0; vf < num_vfs; vf++) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE rte_pmd_ixgbe_set_vf_rxmode(port_id, vf, ETH_VMDQ_ACCEPT_UNTAG, 0); #endif diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index fdfdd1971..cc8edac3d 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -13,7 +13,7 @@ sources = files('lib/rte_ethtool.c', includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f1a045a0a..6afbaa680 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' allow_experimental_apis = true -build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') +build = dpdk_conf.has('RTE_RAW_IOAT') deps += ['raw_ioat'] diff --git a/examples/ip_pipeline/kni.c b/examples/ip_pipeline/kni.c index 451968593..a2d3331cb 100644 --- a/examples/ip_pipeline/kni.c +++ b/examples/ip_pipeline/kni.c @@ -24,7 +24,7 @@ kni_init(void) { TAILQ_INIT(&kni_list); -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI rte_kni_init(KNI_MAX); #endif @@ -46,7 +46,7 @@ kni_find(const char *name) return NULL; } -#ifndef RTE_LIBRTE_KNI +#ifndef RTE_LIB_KNI struct kni * kni_create(const char *name __rte_unused, diff --git a/examples/ip_pipeline/kni.h b/examples/ip_pipeline/kni.h index c3856456d..118f48df7 100644 --- a/examples/ip_pipeline/kni.h +++ b/examples/ip_pipeline/kni.h @@ -8,7 +8,7 @@ #include <stdint.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_kni.h> #endif @@ -17,7 +17,7 @@ struct kni { TAILQ_ENTRY(kni) node; char name[NAME_SIZE]; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_kni *k; #endif }; diff --git a/examples/ip_pipeline/pipeline.c b/examples/ip_pipeline/pipeline.c index b627310a0..7ebabcae9 100644 --- a/examples/ip_pipeline/pipeline.c +++ b/examples/ip_pipeline/pipeline.c @@ -11,7 +11,7 @@ #include <rte_string_fns.h> #include <rte_port_ethdev.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_port_kni.h> #endif #include <rte_port_ring.h> @@ -28,7 +28,7 @@ #include <rte_table_lpm_ipv6.h> #include <rte_table_stub.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include "kni.h" #endif #include "link.h" @@ -160,7 +160,7 @@ pipeline_port_in_create(const char *pipeline_name, struct rte_port_ring_reader_params ring; struct rte_port_sched_reader_params sched; struct rte_port_fd_reader_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_reader_params kni; #endif struct rte_port_source_params source; @@ -264,7 +264,7 @@ pipeline_port_in_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_IN_KNI: { struct kni *kni; @@ -404,7 +404,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ring_writer_params ring; struct rte_port_sched_writer_params sched; struct rte_port_fd_writer_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_params kni; #endif struct rte_port_sink_params sink; @@ -415,7 +415,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ethdev_writer_nodrop_params ethdev; struct rte_port_ring_writer_nodrop_params ring; struct rte_port_fd_writer_nodrop_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_nodrop_params kni; #endif struct rte_port_sym_crypto_writer_nodrop_params sym_crypto; @@ -537,7 +537,7 @@ pipeline_port_out_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_OUT_KNI: { struct kni *kni; diff --git a/examples/kni/meson.build b/examples/kni/meson.build index fd6ae4442..58639b139 100644 --- a/examples/kni/meson.build +++ b/examples/kni/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # this app can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') deps += ['kni', 'bus_pci'] sources = files( 'main.c' diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c index 820470db5..8ea2677e5 100644 --- a/examples/l2fwd-crypto/main.c +++ b/examples/l2fwd-crypto/main.c @@ -43,7 +43,7 @@ #include <rte_prefetch.h> #include <rte_random.h> #include <rte_hexdump.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -2273,7 +2273,7 @@ initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports, * (one for the header, one for the private data) */ if (!strcmp(dev_info.driver_name, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 9002d62a6..1813f015b 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' deps += 'cryptodev' -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif allow_experimental_apis = true diff --git a/examples/l3fwd-power/meson.build b/examples/l3fwd-power/meson.build index 4cd694710..eb8aef306 100644 --- a/examples/l3fwd-power/meson.build +++ b/examples/l3fwd-power/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index bac6e5cd2..b0201f68b 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -15,6 +15,6 @@ cflags += ['-D_FILE_OFFSET_BITS=64'] sources = files( 'ntb_fwd.c' ) -if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') +if dpdk_conf.has('RTE_RAW_NTB') deps += 'raw_ntb' endif diff --git a/examples/vhost_crypto/meson.build b/examples/vhost_crypto/meson.build index 2485f3bd1..b2c125e2f 100644 --- a/examples/vhost_crypto/meson.build +++ b/examples/vhost_crypto/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') allow_experimental_apis = true deps += ['vhost', 'cryptodev'] sources = files( diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c index 1d00a6cf6..228f06803 100644 --- a/examples/vm_power_manager/channel_monitor.c +++ b/examples/vm_power_manager/channel_monitor.c @@ -28,7 +28,7 @@ #include <rte_atomic.h> #include <rte_cycles.h> #include <rte_ethdev.h> -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif #include <rte_power.h> @@ -439,7 +439,7 @@ get_pfid(struct policy *pol) for (i = 0; i < pol->pkt.nb_mac_to_monitor; i++) { RTE_ETH_FOREACH_DEV(x) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_query_vfid_by_mac(x, (struct rte_ether_addr *)&(pol->pkt.vfid[i])); #else @@ -538,13 +538,13 @@ get_pkt_diff(struct policy *pol) vsi_pkt_count_prev_total = 0; double rdtsc_curr, rdtsc_diff, diff; int x; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_eth_stats vf_stats; #endif for (x = 0; x < pol->pkt.nb_mac_to_monitor; x++) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E /*Read vsi stats*/ if (rte_pmd_i40e_get_vf_stats(x, pol->pfid[x], &vf_stats) == 0) vsi_pkt_count = vf_stats.ipackets; diff --git a/examples/vm_power_manager/guest_cli/meson.build b/examples/vm_power_manager/guest_cli/meson.build index 8c725420d..cd9526601 100644 --- a/examples/vm_power_manager/guest_cli/meson.build +++ b/examples/vm_power_manager/guest_cli/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c index 44d2508b1..17b38406f 100644 --- a/examples/vm_power_manager/main.c +++ b/examples/vm_power_manager/main.c @@ -31,13 +31,13 @@ #include "vm_power_cli.h" #include "oob_monitor.h" #include "parse.h" -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif @@ -397,16 +397,16 @@ main(int argc, char **argv) eth.addr_bytes[5] = w + 0xf0; ret = -ENOTSUP; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_mac_addr(portid, w, ð); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr( portid, w, ð); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr( portid, w, ð); diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 2dd132015..1f813fbe8 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -6,22 +6,22 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif deps += ['power'] -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += ['net_bnxt'] endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += ['net_i40e'] endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += ['net_ixgbe'] endif diff --git a/lib/librte_eal/linux/eal.c b/lib/librte_eal/linux/eal.c index 9cf0e2ec0..9b579b820 100644 --- a/lib/librte_eal/linux/eal.c +++ b/lib/librte_eal/linux/eal.c @@ -1085,7 +1085,7 @@ rte_eal_init(int argc, char **argv) */ iova_mode = RTE_IOVA_VA; RTE_LOG(DEBUG, EAL, "Physical addresses are unavailable, selecting IOVA as VA mode.\n"); -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) } else if (rte_eal_check_module("rte_kni") == 1) { iova_mode = RTE_IOVA_PA; RTE_LOG(DEBUG, EAL, "KNI is loaded, selecting IOVA as PA mode for better KNI performance.\n"); @@ -1102,7 +1102,7 @@ rte_eal_init(int argc, char **argv) RTE_LOG(DEBUG, EAL, "IOMMU is not available, selecting IOVA as PA mode.\n"); } } -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) /* Workaround for KNI which requires physical address to work * in kernels < 4.10 */ diff --git a/lib/librte_metrics/rte_metrics_telemetry.c b/lib/librte_metrics/rte_metrics_telemetry.c index 289ebae0b..b97152aeb 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.c +++ b/lib/librte_metrics/rte_metrics_telemetry.c @@ -6,7 +6,7 @@ #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <rte_telemetry_legacy.h> #endif @@ -529,7 +529,7 @@ RTE_LOG_REGISTER(metrics_log_level, lib.metrics, ERR); RTE_INIT(metrics_ctor) { -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY rte_telemetry_legacy_register("ports_all_stat_values", DATA_NOT_REQ, handle_ports_all_stats_values); rte_telemetry_legacy_register("global_stat_values", DATA_NOT_REQ, diff --git a/lib/librte_metrics/rte_metrics_telemetry.h b/lib/librte_metrics/rte_metrics_telemetry.h index 6c2391c56..3435a5542 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.h +++ b/lib/librte_metrics/rte_metrics_telemetry.h @@ -2,7 +2,7 @@ * Copyright(c) 2020 Intel Corporation */ -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <jansson.h> #else #define json_t void * diff --git a/lib/librte_port/meson.build b/lib/librte_port/meson.build index 9bbae28b7..609624c29 100644 --- a/lib/librte_port/meson.build +++ b/lib/librte_port/meson.build @@ -33,7 +33,7 @@ if dpdk_conf.has('RTE_PORT_PCAP') ext_deps += pcap_dep # dependency provided in config/meson.build endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') sources += files('rte_port_kni.c') headers += files('rte_port_kni.h') deps += 'kni' diff --git a/lib/meson.build b/lib/meson.build index 5f8177e1a..df4c1e334 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -73,7 +73,7 @@ foreach l:libraries ext_deps = [] deps = [] # eal is standard dependency once built - if dpdk_conf.has('RTE_LIBRTE_EAL') + if dpdk_conf.has('RTE_LIB_EAL') deps += ['eal'] endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros Bruce Richardson @ 2020-10-18 11:55 ` Xu, Rosen 0 siblings, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 11:55 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Tahhan, Maryam, Pattan, Reshma, Chautru, Nicolas, Doherty, Declan, Dumitrescu, Cristian, Lu, Wenzhuo, Xing, Beilei, Iremonger, Bernard, Wang, Yipeng1, Gobriel, Sameh, Olivier Matz, Andrew Rybchenko, Medvedkin, Vladimir, Burakov, Anatoly, Honnappa Nagarahalli, Ananyev, Konstantin, Hunt, David, Hemant Agrawal, Sachin Saxena, Trahe, Fiona, Ashish Gupta, De Lara Guarch, Pablo, Akhil Goyal, Griffin, John, Jain, Deepak K, Guo, Jia, Wang, Haiyue, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Xia, Chenbo, Wang, Zhihong, Nipun Gupta, Zhang, Tianfei, Wang, Xiao W, Li, Xiaoyun, Wu, Jingjing > Use the newer macros defined by meson in all DPDK source code, to ensure > there are no errors when the old non-standard macros are removed. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- Reviewed-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 0/8] Rework build macros 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson ` (10 preceding siblings ...) 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 1/8] app: fix missing dependencies Bruce Richardson ` (8 more replies) 11 siblings, 9 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson Following on from discussion in RFC v1 and v2 of this set, this version reworks the automated macros defined by meson to indicate if a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config. Advantages of this rework: * Much cleaner having standard macros * No need for defining the format of macros for each class * Shorter macros (for the most part) Disadvantages: * Potentially requires application changes * Inconsistency between the auto-defined macros and the other feature-set ones. --- v5: moved build fix from patch 3 to patch 1 where it logically belongs v4: fixed errors when running test-null.sh flagged by CI v3: rebased to latest dropped RFC from title dropped 21.02 cleanup patch so whole patchset targets 20.11 Bruce Richardson (8): app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency build: add defines for compatibility with make build qat: build from common folder build: remove library name from version map filename devtools/test-null: load all drivers from directory build: standardize component names and defines build: replace use of old build macros app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 8 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 3 + app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 34 +++- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 29 +-- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 ++++++++++++ config/rte_config.h | 1 + devtools/test-null.sh | 2 +- doc/guides/rel_notes/deprecation.rst | 8 + ..._fpga_5gnr_fec_version.map => version.map} | 0 ...v_fpga_lte_fec_version.map => version.map} | 0 drivers/baseband/meson.build | 1 - ...pmd_bbdev_null_version.map => version.map} | 0 ...bbdev_turbo_sw_version.map => version.map} | 0 .../{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- ...{rte_bus_fslmc_version.map => version.map} | 0 ...{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/meson.build | 1 - .../{rte_bus_pci_version.map => version.map} | 0 .../{rte_bus_vdev_version.map => version.map} | 0 ...{rte_bus_vmbus_version.map => version.map} | 0 ...rte_common_cpt_version.map => version.map} | 0 ...e_common_dpaax_version.map => version.map} | 0 ...te_common_iavf_version.map => version.map} | 0 drivers/common/meson.build | 3 +- drivers/common/mlx5/meson.build | 1 - ...te_common_mlx5_version.map => version.map} | 0 ...te_common_mvep_version.map => version.map} | 0 ...ommon_octeontx_version.map => version.map} | 0 ...mmon_octeontx2_version.map => version.map} | 0 drivers/common/qat/meson.build | 68 ++++++- .../qat/version.map} | 0 ...common_sfc_efx_version.map => version.map} | 0 .../version.map} | 0 drivers/compress/meson.build | 5 +- drivers/compress/octeontx/meson.build | 2 +- .../version.map} | 0 drivers/compress/qat/meson.build | 17 -- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../{rte_pmd_zlib_version.map => version.map} | 0 ..._pmd_aesni_gcm_version.map => version.map} | 0 .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- ...e_pmd_aesni_mb_version.map => version.map} | 0 ...{rte_pmd_armv8_version.map => version.map} | 0 ...te_pmd_caam_jr_version.map => version.map} | 0 .../{rte_pmd_ccp_version.map => version.map} | 0 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- ..._pmd_dpaa2_sec_version.map => version.map} | 0 drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- ...e_pmd_dpaa_sec_version.map => version.map} | 0 ...rte_pmd_kasumi_version.map => version.map} | 0 drivers/crypto/meson.build | 4 +- ...{rte_pmd_mvsam_version.map => version.map} | 0 ...rte_pmd_nitrox_version.map => version.map} | 0 drivers/crypto/null/meson.build | 2 +- ...md_null_crypto_version.map => version.map} | 0 drivers/crypto/octeontx/meson.build | 2 +- ...cteontx_crypto_version.map => version.map} | 0 drivers/crypto/octeontx2/meson.build | 2 +- ...teontx2_crypto_version.map => version.map} | 0 ...te_pmd_openssl_version.map => version.map} | 0 drivers/crypto/qat/meson.build | 23 --- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/crypto/scheduler/meson.build | 2 +- ...ypto_scheduler_version.map => version.map} | 0 ...rte_pmd_snow3g_version.map => version.map} | 0 drivers/crypto/virtio/meson.build | 2 +- ..._virtio_crypto_version.map => version.map} | 0 .../{rte_pmd_zuc_version.map => version.map} | 0 drivers/event/dpaa/meson.build | 2 +- ...pmd_dpaa_event_version.map => version.map} | 0 drivers/event/dpaa2/meson.build | 2 +- ...md_dpaa2_event_version.map => version.map} | 0 ..._pmd_dsw_event_version.map => version.map} | 0 drivers/event/meson.build | 3 +- drivers/event/octeontx/meson.build | 2 +- ...octeontx_event_version.map => version.map} | 0 drivers/event/octeontx2/meson.build | 2 +- ...cteontx2_event_version.map => version.map} | 0 ...pmd_opdl_event_version.map => version.map} | 0 ...skeleton_event_version.map => version.map} | 0 ...e_pmd_sw_event_version.map => version.map} | 0 ...mempool_bucket_version.map => version.map} | 0 ...e_mempool_dpaa_version.map => version.map} | 0 ..._mempool_dpaa2_version.map => version.map} | 0 drivers/mempool/meson.build | 1 - ...mpool_octeontx_version.map => version.map} | 0 ...pool_octeontx2_version.map => version.map} | 0 ...e_mempool_ring_version.map => version.map} | 0 ..._mempool_stack_version.map => version.map} | 0 drivers/meson.build | 29 ++- ..._pmd_af_packet_version.map => version.map} | 0 ...rte_pmd_af_xdp_version.map => version.map} | 0 .../{rte_pmd_ark_version.map => version.map} | 0 ...e_pmd_atlantic_version.map => version.map} | 0 .../{rte_pmd_avp_version.map => version.map} | 0 ...{rte_pmd_axgbe_version.map => version.map} | 0 ...{rte_pmd_bnx2x_version.map => version.map} | 0 .../{rte_pmd_bnxt_version.map => version.map} | 0 .../{rte_pmd_bond_version.map => version.map} | 0 ...{rte_pmd_cxgbe_version.map => version.map} | 0 .../{rte_pmd_dpaa_version.map => version.map} | 0 ...{rte_pmd_dpaa2_version.map => version.map} | 0 ...{rte_pmd_e1000_version.map => version.map} | 0 .../{rte_pmd_ena_version.map => version.map} | 0 ...{rte_pmd_enetc_version.map => version.map} | 0 .../{rte_pmd_enic_version.map => version.map} | 0 ...e_pmd_failsafe_version.map => version.map} | 0 ...{rte_pmd_fm10k_version.map => version.map} | 0 ...{rte_pmd_hinic_version.map => version.map} | 0 .../{rte_pmd_hns3_version.map => version.map} | 0 .../{rte_pmd_i40e_version.map => version.map} | 0 .../{rte_pmd_iavf_version.map => version.map} | 0 .../{rte_pmd_ice_version.map => version.map} | 0 .../{rte_pmd_igc_version.map => version.map} | 0 ...{rte_pmd_ionic_version.map => version.map} | 0 ...rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- ...{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/meson.build | 2 +- .../{rte_pmd_kni_version.map => version.map} | 0 ...e_pmd_liquidio_version.map => version.map} | 0 ...{rte_pmd_memif_version.map => version.map} | 0 drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- .../{rte_pmd_mlx4_version.map => version.map} | 0 .../{rte_pmd_mlx5_version.map => version.map} | 0 ...rte_pmd_mvneta_version.map => version.map} | 0 ...{rte_pmd_mvpp2_version.map => version.map} | 0 drivers/net/netvsc/meson.build | 2 +- ...rte_pmd_netvsc_version.map => version.map} | 0 .../{rte_pmd_nfb_version.map => version.map} | 0 .../{rte_pmd_nfp_version.map => version.map} | 0 .../{rte_pmd_null_version.map => version.map} | 0 ...e_pmd_octeontx_version.map => version.map} | 0 ..._pmd_octeontx2_version.map => version.map} | 0 .../{rte_pmd_pcap_version.map => version.map} | 0 .../{rte_pmd_pfe_version.map => version.map} | 0 .../{rte_pmd_qede_version.map => version.map} | 0 .../{rte_pmd_ring_version.map => version.map} | 0 .../{rte_pmd_sfc_version.map => version.map} | 0 ...te_pmd_softnic_version.map => version.map} | 0 ...e_pmd_szedata2_version.map => version.map} | 0 .../{rte_pmd_tap_version.map => version.map} | 0 ...e_pmd_thunderx_version.map => version.map} | 0 ...md_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/meson.build | 2 +- ...{rte_pmd_vhost_version.map => version.map} | 0 ...rte_pmd_virtio_version.map => version.map} | 0 ...te_pmd_vmxnet3_version.map => version.map} | 0 drivers/raw/dpaa2_cmdif/meson.build | 2 +- ...ev_dpaa2_cmdif_version.map => version.map} | 0 drivers/raw/dpaa2_qdma/meson.build | 2 +- ...dev_dpaa2_qdma_version.map => version.map} | 0 drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/raw/ifpga/meson.build | 2 +- ...e_rawdev_ifpga_version.map => version.map} | 0 ...te_rawdev_ioat_version.map => version.map} | 0 drivers/raw/meson.build | 1 - ...rte_rawdev_ntb_version.map => version.map} | 0 ..._octeontx2_dma_version.map => version.map} | 0 ...v_octeontx2_ep_version.map => version.map} | 0 ...awdev_skeleton_version.map => version.map} | 0 drivers/regex/meson.build | 1 - ...pmd_mlx5_regex_version.map => version.map} | 0 ...cteontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/meson.build | 2 +- .../{rte_pmd_ifc_version.map => version.map} | 0 drivers/vdpa/meson.build | 1 - ..._pmd_mlx5_vdpa_version.map => version.map} | 0 examples/bond/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 4 +- examples/ioat/meson.build | 4 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 3 + examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 4 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 14 +- .../{rte_acl_version.map => version.map} | 0 .../{rte_bbdev_version.map => version.map} | 0 ...e_bitratestats_version.map => version.map} | 0 .../{rte_bpf_version.map => version.map} | 0 .../{rte_cfgfile_version.map => version.map} | 0 .../{rte_cmdline_version.map => version.map} | 0 ...te_compressdev_version.map => version.map} | 0 ...{rte_cryptodev_version.map => version.map} | 0 ...te_distributor_version.map => version.map} | 0 lib/librte_eal/linux/eal.c | 4 +- .../{rte_eal_version.map => version.map} | 0 .../{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/meson.build | 1 - .../{rte_ethdev_version.map => version.map} | 0 .../{rte_eventdev_version.map => version.map} | 0 .../{rte_fib_version.map => version.map} | 0 ..._flow_classify_version.map => version.map} | 0 lib/librte_graph/meson.build | 2 - .../{rte_graph_version.map => version.map} | 0 .../{rte_gro_version.map => version.map} | 0 .../{rte_gso_version.map => version.map} | 0 .../{rte_hash_version.map => version.map} | 0 .../{rte_ip_frag_version.map => version.map} | 0 .../{rte_ipsec_version.map => version.map} | 0 .../{rte_jobstats_version.map => version.map} | 0 .../{rte_kni_version.map => version.map} | 0 .../{rte_kvargs_version.map => version.map} | 0 ...e_latencystats_version.map => version.map} | 0 .../{rte_lpm_version.map => version.map} | 0 .../{rte_mbuf_version.map => version.map} | 0 .../{rte_member_version.map => version.map} | 0 .../{rte_mempool_version.map => version.map} | 0 .../{rte_meter_version.map => version.map} | 0 lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- .../{rte_metrics_version.map => version.map} | 0 .../{rte_net_version.map => version.map} | 0 .../{rte_node_version.map => version.map} | 0 .../{rte_pci_version.map => version.map} | 0 .../{rte_pdump_version.map => version.map} | 0 .../{rte_pipeline_version.map => version.map} | 0 lib/librte_port/meson.build | 2 +- .../{rte_port_version.map => version.map} | 0 .../{rte_power_version.map => version.map} | 0 .../{rte_rawdev_version.map => version.map} | 0 .../{rte_rcu_version.map => version.map} | 0 .../{rte_regexdev_version.map => version.map} | 0 .../{rte_reorder_version.map => version.map} | 0 .../{rte_rib_version.map => version.map} | 0 .../{rte_ring_version.map => version.map} | 0 .../{rte_sched_version.map => version.map} | 0 .../{rte_security_version.map => version.map} | 0 .../{rte_stack_version.map => version.map} | 0 .../{rte_table_version.map => version.map} | 0 ...{rte_telemetry_version.map => version.map} | 0 .../{rte_timer_version.map => version.map} | 0 .../{rte_vhost_version.map => version.map} | 0 lib/meson.build | 9 +- 292 files changed, 661 insertions(+), 493 deletions(-) create mode 100644 config/rte_compatibility_defines.h rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%) rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) delete mode 100644 drivers/crypto/qat/meson.build rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 1/8] app: fix missing dependencies 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson ` (7 subsequent siblings) 8 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Harry van Haaren, Luca Boccassi, Keith Wiles A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build. Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 996ef1176111 ("app: add all remaining apps to meson build") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- app/test-crypto-perf/meson.build | 3 +++ app/test-pmd/meson.build | 12 ++++++++++++ app/test/meson.build | 1 + 3 files changed, 16 insertions(+) diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index f394b75ba..4bd71510d 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,3 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index f52ab148f..0d9e45049 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -31,6 +31,18 @@ endif if dpdk_conf.has('RTE_LIBRTE_PDUMP') deps += 'pdump' endif +if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') + deps += 'bitratestats' +endif +if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') + deps += 'latencystats' +endif +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif +if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') + deps += 'pmd_bond' +endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') deps += 'pmd_bnxt' endif diff --git a/app/test/meson.build b/app/test/meson.build index dedf29dd7..fc90a1909 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -415,6 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' + test_deps += 'pmd_crypto_scheduler' endif foreach d:test_deps -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 2/8] examples/l2fwd-crypto: fix missing dependency 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 1/8] app: fix missing dependencies Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 3/8] build: add defines for compatibility with make build Bruce Richardson ` (6 subsequent siblings) 8 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Declan Doherty When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build. Fixes: 89f0711f9ddf ("examples: build some samples with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- examples/l2fwd-crypto/meson.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 6c852ad19..39e1604fa 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,6 +7,9 @@ # DPDK instance, use 'make' deps += 'cryptodev' +if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') + deps += 'pmd_crypto_scheduler' +endif allow_experimental_apis = true sources = files( 'main.c' -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 3/8] build: add defines for compatibility with make build 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 1/8] app: fix missing dependencies Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 4/8] qat: build from common folder Bruce Richardson ` (5 subsequent siblings) 8 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, stable, Fiona Trahe, Ashish Gupta, Harry van Haaren, Keith Wiles, Luca Boccassi, Lee Daly, Pablo de Lara The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases. As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions. For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson. Fixes: 5b9656b157d3 ("lib: build with meson") Fixes: 9314afb68a53 ("drivers: add infrastructure for meson build") Fixes: dcadbbde8e61 ("crypto/null: build with meson") Fixes: 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD") Fixes: eca504f318db ("drivers/event: build skeleton and SW drivers with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- config/meson.build | 3 +- config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++ config/rte_config.h | 1 + drivers/compress/meson.build | 2 +- drivers/crypto/meson.build | 2 +- drivers/event/meson.build | 2 +- drivers/meson.build | 15 ++++ 7 files changed, 150 insertions(+), 4 deletions(-) create mode 100644 config/rte_compatibility_defines.h diff --git a/config/meson.build b/config/meson.build index e2ea9f1d8..258b01d06 100644 --- a/config/meson.build +++ b/config/meson.build @@ -253,7 +253,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags)) # set the install path for the drivers dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path) -install_headers('rte_config.h', subdir: get_option('include_subdir_arch')) +install_headers(['rte_config.h', 'rte_compatibility_defines.h'], + subdir: get_option('include_subdir_arch')) # enable VFIO only if it is linux OS dpdk_conf.set('RTE_EAL_VFIO', is_linux) diff --git a/config/rte_compatibility_defines.h b/config/rte_compatibility_defines.h new file mode 100644 index 000000000..47600052b --- /dev/null +++ b/config/rte_compatibility_defines.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2017 Intel Corporation + */ + +#ifndef _RTE_CONFIG_H_ +#error "This file should only be included via rte_config.h" +#endif + +/* + * NOTE: these defines are for compatibility only and will be removed in a + * future DPDK release. + */ + +#ifdef RTE_LIBRTE_BITRATESTATS +#define RTE_LIBRTE_BITRATE +#endif + +#ifdef RTE_LIBRTE_LATENCYSTATS +#define RTE_LIBRTE_LATENCY_STATS +#endif + +#ifdef RTE_LIBRTE_DPAAX_COMMON +#define RTE_LIBRTE_COMMON_DPAAX +#endif + +#ifdef RTE_LIBRTE_VMBUS_BUS +#define RTE_LIBRTE_VMBUS +#endif + +#ifdef RTE_LIBRTE_BUCKET_MEMPOOL +#define RTE_DRIVER_MEMPOOL_BUCKET +#endif + +#ifdef RTE_LIBRTE_RING_MEMPOOL +#define RTE_DRIVER_MEMPOOL_RING +#endif + +#ifdef RTE_LIBRTE_STACK_MEMPOOL +#define RTE_DRIVER_MEMPOOL_STACK +#endif + +#ifdef RTE_LIBRTE_AF_PACKET_PMD +#define RTE_LIBRTE_PMD_AF_PACKET +#endif + +#ifdef RTE_LIBRTE_AF_XDP_PMD +#define RTE_LIBRTE_PMD_AF_XDP +#endif + +#ifdef RTE_LIBRTE_BOND_PMD +#define RTE_LIBRTE_PMD_BOND +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_EM_PMD +#endif + +#ifdef RTE_LIBRTE_E1000_PMD +#define RTE_LIBRTE_IGB_PMD +#endif + +#ifdef RTE_LIBRTE_FAILSAFE_PMD +#define RTE_LIBRTE_PMD_FAILSAFE +#endif + +#ifdef RTE_LIBRTE_KNI_PMD +#define RTE_LIBRTE_PMD_KNI +#endif + +#ifdef RTE_LIBRTE_LIQUIDIO_PMD +#define RTE_LIBRTE_LIO_PMD +#endif + +#ifdef RTE_LIBRTE_MEMIF_PMD +#define RTE_LIBRTE_PMD_MEMIF +#endif + +#ifdef RTE_LIBRTE_NULL_PMD +#define RTE_LIBRTE_PMD_NULL +#endif + +#ifdef RTE_LIBRTE_PCAP_PMD +#define RTE_LIBRTE_PMD_PCAP +#endif + +#ifdef RTE_LIBRTE_RING_PMD +#define RTE_LIBRTE_PMD_RING +#endif + +#ifdef RTE_LIBRTE_SFC_PMD +#define RTE_LIBRTE_SFC_EFX_PMD +#endif + +#ifdef RTE_LIBRTE_SOFTNIC_PMD +#define RTE_LIBRTE_PMD_SOFTNIC +#endif + +#ifdef RTE_LIBRTE_SZEDATA2_PMD +#define RTE_LIBRTE_PMD_SZEDATA2 +#endif + +#ifdef RTE_LIBRTE_TAP_PMD +#define RTE_LIBRTE_PMD_TAP +#endif + +#ifdef RTE_LIBRTE_THUNDERX_PMD +#define RTE_LIBRTE_THUNDERX_NICVF_PMD +#endif + +#ifdef RTE_LIBRTE_VHOST_PMD +#define RTE_LIBRTE_PMD_VHOST +#endif + +#ifdef RTE_LIBRTE_PMD_ARMV8 +#define RTE_LIBRTE_PMD_ARMV8_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_MVSAM +#define RTE_LIBRTE_PMD_MVSAM_CRYPTO +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_COMPRESS +#define RTE_LIBRTE_PMD_OCTEONTX_ZIPVF +#endif + +#ifdef RTE_LIBRTE_PMD_OCTEONTX_EVENTDEV +#define RTE_LIBRTE_PMD_OCTEONTX_SSOVF +#endif + diff --git a/config/rte_config.h b/config/rte_config.h index 03d90d78b..1bebab335 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -13,6 +13,7 @@ #define _RTE_CONFIG_H_ #include <rte_build_config.h> +#include <rte_compatibility_defines.h> /* legacy defines */ #ifdef RTE_EXEC_ENV_LINUX diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index ee883c3f9..bea1720a0 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -8,5 +8,5 @@ endif drivers = ['isal', 'octeontx', 'qat', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index a2423507a..25b99c19c 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,5 +26,5 @@ drivers = ['aesni_gcm', 'zuc'] std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps -config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/event/meson.build b/drivers/event/meson.build index ebe76a75c..f2a343147 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and drivers += 'octeontx' endif std_deps = ['eventdev', 'kvargs'] -config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD' +config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/meson.build b/drivers/meson.build index 5f9526557..b5ac483d3 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -117,6 +117,21 @@ foreach subpath:subdirs fmt_name = name endif dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + # for driver compatibility, since we changed the + # default to match that of make. Remove in future release + # after following deprecation process + if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto' + or class == 'compress' + or class == 'event') + alt_flag_fmt = '_@0@_PMD'.join( + config_flag_fmt.split('_PMD_@0@')) + if config_flag_fmt.contains('EVENTDEV') + alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join( + config_flag_fmt.split('_PMD_@0@_EVENTDEV')) + endif + dpdk_conf.set(alt_flag_fmt.format( + fmt_name.to_upper()), 1) + endif lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 4/8] qat: build from common folder 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (2 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 3/8] build: add defines for compatibility with make build Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename Bruce Richardson ` (4 subsequent siblings) 8 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Fiona Trahe, John Griffin, Deepak Kumar Jain, Ray Kinsella, Neil Horman, Ashish Gupta Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders. This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- drivers/common/meson.build | 2 +- drivers/common/qat/meson.build | 69 ++++++++++++++++--- .../qat/rte_common_qat_version.map} | 0 drivers/compress/meson.build | 2 +- drivers/compress/qat/meson.build | 17 ----- drivers/crypto/meson.build | 1 - drivers/crypto/qat/meson.build | 23 ------- drivers/meson.build | 1 + 8 files changed, 63 insertions(+), 52 deletions(-) rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%) delete mode 100644 drivers/compress/qat/meson.build delete mode 100644 drivers/crypto/qat/meson.build diff --git a/drivers/common/meson.build b/drivers/common/meson.build index 7ac1ca73a..abb4f1529 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -6,6 +6,6 @@ if is_windows endif std_deps = ['eal'] -drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx'] +drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 8de249289..3409162d0 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -1,15 +1,66 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2018 Intel Corporation -# This does not build a driver, but instead holds common files for -# the crypto and compression drivers. -build = false -reason = '' # sentinal value to suppress printout -qat_deps = ['bus_pci'] -qat_sources = files('qat_common.c', +config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' +driver_name_fmt = 'rte_common_@0@' + +qat_crypto = true +qat_crypto_path = 'crypto/qat' +qat_crypto_relpath = '../../' + qat_crypto_path +qat_compress = true +qat_compress_path = 'compress/qat' +qat_compress_relpath = '../../' + qat_compress_path + +if disabled_drivers.contains(qat_crypto_path) + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif +if disabled_drivers.contains(qat_compress_path) + qat_compress = false + dpdk_drvs_disabled += qat_compress_path + set_variable(qat_compress_path.underscorify() + '_disable_reason', + 'Explicitly disabled via build config') +endif + +libcrypto = dependency('libcrypto', required: false) +if qat_crypto and not libcrypto.found() + qat_crypto = false + dpdk_drvs_disabled += qat_crypto_path + set_variable(qat_crypto_path.underscorify() + '_disable_reason', + 'missing dependency, libcrypto') +endif + +# The driver should not build if both compression and crypto are disabled +#FIXME common code depends on compression files so check only compress! +if not qat_compress # and not qat_crypto + build = false + reason = '' # rely on reason for compress/crypto above + subdir_done() +endif + +deps += ['bus_pci', 'cryptodev', 'net', 'compressdev'] +sources += files('qat_common.c', 'qat_qp.c', 'qat_device.c', 'qat_logs.c') -qat_includes = [include_directories('.', 'qat_adf')] -qat_ext_deps = [] -qat_cflags = [] +includes += include_directories('qat_adf', + qat_crypto_relpath, + qat_compress_relpath) + +if qat_compress + foreach f: ['qat_comp_pmd.c', 'qat_comp.c'] + sources += files(join_paths(qat_compress_relpath, f)) + endforeach +endif + +if qat_crypto + foreach f: ['qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c', + 'qat_asym_pmd.c', 'qat_asym.c'] + sources += files(join_paths(qat_crypto_relpath, f)) + endforeach + deps += ['security'] + ext_deps += libcrypto + cflags += ['-DBUILD_QAT_SYM', '-DBUILD_QAT_ASYM'] +endif diff --git a/drivers/compress/qat/rte_pmd_qat_version.map b/drivers/common/qat/rte_common_qat_version.map similarity index 100% rename from drivers/compress/qat/rte_pmd_qat_version.map rename to drivers/common/qat/rte_common_qat_version.map diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index bea1720a0..3a4723c0c 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -5,7 +5,7 @@ if is_windows subdir_done() endif -drivers = ['isal', 'octeontx', 'qat', 'zlib'] +drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' diff --git a/drivers/compress/qat/meson.build b/drivers/compress/qat/meson.build deleted file mode 100644 index a00246980..000000000 --- a/drivers/compress/qat/meson.build +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - - -# Add our sources files to the list -qat_sources += files('qat_comp_pmd.c', - 'qat_comp.c') -qat_includes += include_directories('.') -qat_deps += 'compressdev' -qat_ext_deps += dep - -# build the whole driver -sources += qat_sources -cflags += qat_cflags -deps += qat_deps -ext_deps += qat_ext_deps -includes += qat_includes diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 25b99c19c..bd7a940e6 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -19,7 +19,6 @@ drivers = ['aesni_gcm', 'octeontx', 'octeontx2', 'openssl', - 'qat', 'scheduler', 'snow3g', 'virtio', diff --git a/drivers/crypto/qat/meson.build b/drivers/crypto/qat/meson.build deleted file mode 100644 index a225f374a..000000000 --- a/drivers/crypto/qat/meson.build +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017-2018 Intel Corporation - -# this does not build the QAT driver, instead that is done in the compression -# driver which comes later. Here we just add our sources files to the list -build = false -reason = '' # sentinal value to suppress printout -dep = dependency('libcrypto', required: false) -qat_includes += include_directories('.') -qat_deps += 'cryptodev' -qat_deps += 'net' -qat_deps += 'security' -if dep.found() - # Add our sources files to the list - qat_sources += files('qat_sym_pmd.c', - 'qat_sym.c', - 'qat_sym_session.c', - 'qat_asym_pmd.c', - 'qat_asym.c') - qat_ext_deps += dep - qat_cflags += '-DBUILD_QAT_SYM' - qat_cflags += '-DBUILD_QAT_ASYM' -endif diff --git a/drivers/meson.build b/drivers/meson.build index b5ac483d3..b95b00583 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -6,6 +6,7 @@ subdirs = [ 'common', 'bus', 'common/mlx5', # depends on bus. + 'common/qat', # depends on bus. 'mempool', # depends on common and bus. 'net', # depends on common, bus, mempool 'raw', # depends on common, bus and net. -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (3 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 4/8] qat: build from common folder Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:28 ` Andrew Rybchenko 2020-10-18 9:24 ` Xu, Rosen 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory Bruce Richardson ` (3 subsequent siblings) 8 siblings, 2 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Ray Kinsella, Neil Horman, Nicolas Chautru, Hemant Agrawal, Sachin Saxena, Rosen Xu, Stephen Hemminger, Long Li, Anoob Joseph, Jingjing Wu, Beilei Xing, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, John Griffin, Fiona Trahe, Deepak Kumar Jain, Andrew Rybchenko, Lee Daly, Ashish Gupta, Sunila Sahu, Declan Doherty, Pablo de Lara, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Fan Zhang, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Liang Ma, Peter Mccarthy, Harry van Haaren, Artem V. Andreev, Olivier Matz, Gage Eads, John W. Linville, Ciara Loftus, Qi Zhang, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Jeff Guo, Haiyue Wang, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Xiao Wang, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Qiming Yang, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Jasvinder Singh, Cristian Dumitrescu, Keith Wiles, Maciej Czekaj, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Yong Wang, Tianfei zhang, Xiaoyun Li, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Konstantin Ananyev, David Hunt, Byron Marohn, Yipeng Wang, Vladimir Medvedkin, Bernard Iremonger, Jiayu Hu, Sameh Gobriel, Reshma Pattan, Honnappa Nagarahalli, Kevin Laatz, Robert Sanford, Erik Gabriel Carrillo Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} | 0 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} | 0 .../null/{rte_pmd_bbdev_null_version.map => version.map} | 0 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map} | 0 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} | 0 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} | 0 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} | 0 drivers/bus/pci/{rte_bus_pci_version.map => version.map} | 0 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} | 0 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} | 0 .../common/cpt/{rte_common_cpt_version.map => version.map} | 0 .../dpaax/{rte_common_dpaax_version.map => version.map} | 0 .../common/iavf/{rte_common_iavf_version.map => version.map} | 0 .../common/mlx5/{rte_common_mlx5_version.map => version.map} | 0 .../common/mvep/{rte_common_mvep_version.map => version.map} | 0 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0 .../{rte_common_octeontx2_version.map => version.map} | 0 .../common/qat/{rte_common_qat_version.map => version.map} | 0 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map} | 0 .../compress/isal/{rte_pmd_isal_version.map => version.map} | 0 .../{rte_pmd_octeontx_compress_version.map => version.map} | 0 .../compress/zlib/{rte_pmd_zlib_version.map => version.map} | 0 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} | 0 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} | 0 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map} | 0 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map} | 0 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} | 0 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} | 0 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} | 0 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} | 0 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0 .../null/{rte_pmd_null_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx_crypto_version.map => version.map} | 0 .../{rte_pmd_octeontx2_crypto_version.map => version.map} | 0 .../openssl/{rte_pmd_openssl_version.map => version.map} | 0 .../{rte_pmd_crypto_scheduler_version.map => version.map} | 0 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} | 0 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map} | 0 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} | 0 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map} | 0 .../{rte_pmd_octeontx_event_version.map => version.map} | 0 .../{rte_pmd_octeontx2_event_version.map => version.map} | 0 .../opdl/{rte_pmd_opdl_event_version.map => version.map} | 0 .../{rte_pmd_skeleton_event_version.map => version.map} | 0 .../event/sw/{rte_pmd_sw_event_version.map => version.map} | 0 .../bucket/{rte_mempool_bucket_version.map => version.map} | 0 .../dpaa/{rte_mempool_dpaa_version.map => version.map} | 0 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map} | 0 .../{rte_mempool_octeontx_version.map => version.map} | 0 .../{rte_mempool_octeontx2_version.map => version.map} | 0 .../ring/{rte_mempool_ring_version.map => version.map} | 0 .../stack/{rte_mempool_stack_version.map => version.map} | 0 drivers/meson.build | 4 ++-- .../af_packet/{rte_pmd_af_packet_version.map => version.map} | 0 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} | 0 drivers/net/ark/{rte_pmd_ark_version.map => version.map} | 0 .../atlantic/{rte_pmd_atlantic_version.map => version.map} | 0 drivers/net/avp/{rte_pmd_avp_version.map => version.map} | 0 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} | 0 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} | 0 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} | 0 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} | 0 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} | 0 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} | 0 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} | 0 drivers/net/ena/{rte_pmd_ena_version.map => version.map} | 0 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} | 0 drivers/net/enic/{rte_pmd_enic_version.map => version.map} | 0 .../failsafe/{rte_pmd_failsafe_version.map => version.map} | 0 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} | 0 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} | 0 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} | 0 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} | 0 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} | 0 drivers/net/ice/{rte_pmd_ice_version.map => version.map} | 0 drivers/net/igc/{rte_pmd_igc_version.map => version.map} | 0 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} | 0 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} | 0 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} | 0 drivers/net/kni/{rte_pmd_kni_version.map => version.map} | 0 .../liquidio/{rte_pmd_liquidio_version.map => version.map} | 0 drivers/net/memif/{rte_pmd_memif_version.map => version.map} | 0 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} | 0 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} | 0 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map} | 0 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} | 0 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map} | 0 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} | 0 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} | 0 drivers/net/null/{rte_pmd_null_version.map => version.map} | 0 .../octeontx/{rte_pmd_octeontx_version.map => version.map} | 0 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map} | 0 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} | 0 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} | 0 drivers/net/qede/{rte_pmd_qede_version.map => version.map} | 0 drivers/net/ring/{rte_pmd_ring_version.map => version.map} | 0 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} | 0 .../net/softnic/{rte_pmd_softnic_version.map => version.map} | 0 .../szedata2/{rte_pmd_szedata2_version.map => version.map} | 0 drivers/net/tap/{rte_pmd_tap_version.map => version.map} | 0 .../thunderx/{rte_pmd_thunderx_version.map => version.map} | 0 .../{rte_pmd_vdev_netvsc_version.map => version.map} | 0 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} | 0 .../net/virtio/{rte_pmd_virtio_version.map => version.map} | 0 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map} | 0 .../{rte_rawdev_dpaa2_qdma_version.map => version.map} | 0 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} | 0 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_dma_version.map => version.map} | 0 .../{rte_rawdev_octeontx2_ep_version.map => version.map} | 0 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map} | 0 .../{rte_pmd_octeontx2_regex_version.map => version.map} | 0 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} | 0 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} | 0 lib/librte_acl/{rte_acl_version.map => version.map} | 0 lib/librte_bbdev/{rte_bbdev_version.map => version.map} | 0 .../{rte_bitratestats_version.map => version.map} | 0 lib/librte_bpf/{rte_bpf_version.map => version.map} | 0 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} | 0 lib/librte_cmdline/{rte_cmdline_version.map => version.map} | 0 .../{rte_compressdev_version.map => version.map} | 0 .../{rte_cryptodev_version.map => version.map} | 0 .../{rte_distributor_version.map => version.map} | 0 lib/librte_eal/{rte_eal_version.map => version.map} | 0 lib/librte_efd/{rte_efd_version.map => version.map} | 0 lib/librte_ethdev/{rte_ethdev_version.map => version.map} | 0 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0 lib/librte_fib/{rte_fib_version.map => version.map} | 0 .../{rte_flow_classify_version.map => version.map} | 0 lib/librte_graph/{rte_graph_version.map => version.map} | 0 lib/librte_gro/{rte_gro_version.map => version.map} | 0 lib/librte_gso/{rte_gso_version.map => version.map} | 0 lib/librte_hash/{rte_hash_version.map => version.map} | 0 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} | 0 lib/librte_ipsec/{rte_ipsec_version.map => version.map} | 0 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0 lib/librte_kni/{rte_kni_version.map => version.map} | 0 lib/librte_kvargs/{rte_kvargs_version.map => version.map} | 0 .../{rte_latencystats_version.map => version.map} | 0 lib/librte_lpm/{rte_lpm_version.map => version.map} | 0 lib/librte_mbuf/{rte_mbuf_version.map => version.map} | 0 lib/librte_member/{rte_member_version.map => version.map} | 0 lib/librte_mempool/{rte_mempool_version.map => version.map} | 0 lib/librte_meter/{rte_meter_version.map => version.map} | 0 lib/librte_metrics/{rte_metrics_version.map => version.map} | 0 lib/librte_net/{rte_net_version.map => version.map} | 0 lib/librte_node/{rte_node_version.map => version.map} | 0 lib/librte_pci/{rte_pci_version.map => version.map} | 0 lib/librte_pdump/{rte_pdump_version.map => version.map} | 0 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0 lib/librte_port/{rte_port_version.map => version.map} | 0 lib/librte_power/{rte_power_version.map => version.map} | 0 lib/librte_rawdev/{rte_rawdev_version.map => version.map} | 0 lib/librte_rcu/{rte_rcu_version.map => version.map} | 0 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0 lib/librte_reorder/{rte_reorder_version.map => version.map} | 0 lib/librte_rib/{rte_rib_version.map => version.map} | 0 lib/librte_ring/{rte_ring_version.map => version.map} | 0 lib/librte_sched/{rte_sched_version.map => version.map} | 0 lib/librte_security/{rte_security_version.map => version.map} | 0 lib/librte_stack/{rte_stack_version.map => version.map} | 0 lib/librte_table/{rte_table_version.map => version.map} | 0 .../{rte_telemetry_version.map => version.map} | 0 lib/librte_timer/{rte_timer_version.map => version.map} | 0 lib/librte_vhost/{rte_vhost_version.map => version.map} | 0 lib/meson.build | 4 ++-- 173 files changed, 4 insertions(+), 4 deletions(-) rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%) rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%) rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%) rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%) rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%) rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%) rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%) rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%) rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%) rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%) rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%) rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%) rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%) rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%) rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%) rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%) rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%) rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%) rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%) rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%) rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%) rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%) rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%) rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%) rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%) rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%) rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%) rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%) rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%) rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%) rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%) rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%) rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%) rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%) rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%) rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%) rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%) rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%) rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%) rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%) rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%) rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%) rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%) rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%) rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%) rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%) rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%) rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%) rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%) rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%) rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%) rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%) rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%) rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%) rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%) rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%) rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%) rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%) rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%) rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%) rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%) rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%) rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%) rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%) rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%) rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%) rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%) rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%) rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%) rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%) rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%) rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%) rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%) rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%) rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%) rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%) rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%) rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%) rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%) rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%) rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%) rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%) rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%) rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%) rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%) rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%) rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%) rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%) rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%) rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%) rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%) rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%) rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%) rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%) rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%) rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%) rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%) rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%) rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%) rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%) rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%) rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%) rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%) rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%) rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%) rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%) rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%) rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%) rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%) rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%) rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%) rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%) rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%) rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%) rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%) rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%) rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%) rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%) rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%) rename lib/librte_acl/{rte_acl_version.map => version.map} (100%) rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%) rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%) rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%) rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%) rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%) rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%) rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%) rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%) rename lib/librte_eal/{rte_eal_version.map => version.map} (100%) rename lib/librte_efd/{rte_efd_version.map => version.map} (100%) rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%) rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%) rename lib/librte_fib/{rte_fib_version.map => version.map} (100%) rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%) rename lib/librte_graph/{rte_graph_version.map => version.map} (100%) rename lib/librte_gro/{rte_gro_version.map => version.map} (100%) rename lib/librte_gso/{rte_gso_version.map => version.map} (100%) rename lib/librte_hash/{rte_hash_version.map => version.map} (100%) rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%) rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%) rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%) rename lib/librte_kni/{rte_kni_version.map => version.map} (100%) rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%) rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%) rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%) rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%) rename lib/librte_member/{rte_member_version.map => version.map} (100%) rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%) rename lib/librte_meter/{rte_meter_version.map => version.map} (100%) rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%) rename lib/librte_net/{rte_net_version.map => version.map} (100%) rename lib/librte_node/{rte_node_version.map => version.map} (100%) rename lib/librte_pci/{rte_pci_version.map => version.map} (100%) rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%) rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%) rename lib/librte_port/{rte_port_version.map => version.map} (100%) rename lib/librte_power/{rte_power_version.map => version.map} (100%) rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%) rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%) rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%) rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%) rename lib/librte_rib/{rte_rib_version.map => version.map} (100%) rename lib/librte_ring/{rte_ring_version.map => version.map} (100%) rename lib/librte_sched/{rte_sched_version.map => version.map} (100%) rename lib/librte_security/{rte_security_version.map => version.map} (100%) rename lib/librte_stack/{rte_stack_version.map => version.map} (100%) rename lib/librte_table/{rte_table_version.map => version.map} (100%) rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%) rename lib/librte_timer/{rte_timer_version.map => version.map} (100%) rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%) diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/version.map similarity index 100% rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map rename to drivers/baseband/fpga_5gnr_fec/version.map diff --git a/drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map b/drivers/baseband/fpga_lte_fec/version.map similarity index 100% rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map rename to drivers/baseband/fpga_lte_fec/version.map diff --git a/drivers/baseband/null/rte_pmd_bbdev_null_version.map b/drivers/baseband/null/version.map similarity index 100% rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map rename to drivers/baseband/null/version.map diff --git a/drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map b/drivers/baseband/turbo_sw/version.map similarity index 100% rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map rename to drivers/baseband/turbo_sw/version.map diff --git a/drivers/bus/dpaa/rte_bus_dpaa_version.map b/drivers/bus/dpaa/version.map similarity index 100% rename from drivers/bus/dpaa/rte_bus_dpaa_version.map rename to drivers/bus/dpaa/version.map diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/version.map similarity index 100% rename from drivers/bus/fslmc/rte_bus_fslmc_version.map rename to drivers/bus/fslmc/version.map diff --git a/drivers/bus/ifpga/rte_bus_ifpga_version.map b/drivers/bus/ifpga/version.map similarity index 100% rename from drivers/bus/ifpga/rte_bus_ifpga_version.map rename to drivers/bus/ifpga/version.map diff --git a/drivers/bus/pci/rte_bus_pci_version.map b/drivers/bus/pci/version.map similarity index 100% rename from drivers/bus/pci/rte_bus_pci_version.map rename to drivers/bus/pci/version.map diff --git a/drivers/bus/vdev/rte_bus_vdev_version.map b/drivers/bus/vdev/version.map similarity index 100% rename from drivers/bus/vdev/rte_bus_vdev_version.map rename to drivers/bus/vdev/version.map diff --git a/drivers/bus/vmbus/rte_bus_vmbus_version.map b/drivers/bus/vmbus/version.map similarity index 100% rename from drivers/bus/vmbus/rte_bus_vmbus_version.map rename to drivers/bus/vmbus/version.map diff --git a/drivers/common/cpt/rte_common_cpt_version.map b/drivers/common/cpt/version.map similarity index 100% rename from drivers/common/cpt/rte_common_cpt_version.map rename to drivers/common/cpt/version.map diff --git a/drivers/common/dpaax/rte_common_dpaax_version.map b/drivers/common/dpaax/version.map similarity index 100% rename from drivers/common/dpaax/rte_common_dpaax_version.map rename to drivers/common/dpaax/version.map diff --git a/drivers/common/iavf/rte_common_iavf_version.map b/drivers/common/iavf/version.map similarity index 100% rename from drivers/common/iavf/rte_common_iavf_version.map rename to drivers/common/iavf/version.map diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map b/drivers/common/mlx5/version.map similarity index 100% rename from drivers/common/mlx5/rte_common_mlx5_version.map rename to drivers/common/mlx5/version.map diff --git a/drivers/common/mvep/rte_common_mvep_version.map b/drivers/common/mvep/version.map similarity index 100% rename from drivers/common/mvep/rte_common_mvep_version.map rename to drivers/common/mvep/version.map diff --git a/drivers/common/octeontx/rte_common_octeontx_version.map b/drivers/common/octeontx/version.map similarity index 100% rename from drivers/common/octeontx/rte_common_octeontx_version.map rename to drivers/common/octeontx/version.map diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/version.map similarity index 100% rename from drivers/common/octeontx2/rte_common_octeontx2_version.map rename to drivers/common/octeontx2/version.map diff --git a/drivers/common/qat/rte_common_qat_version.map b/drivers/common/qat/version.map similarity index 100% rename from drivers/common/qat/rte_common_qat_version.map rename to drivers/common/qat/version.map diff --git a/drivers/common/sfc_efx/rte_common_sfc_efx_version.map b/drivers/common/sfc_efx/version.map similarity index 100% rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map rename to drivers/common/sfc_efx/version.map diff --git a/drivers/compress/isal/rte_pmd_isal_version.map b/drivers/compress/isal/version.map similarity index 100% rename from drivers/compress/isal/rte_pmd_isal_version.map rename to drivers/compress/isal/version.map diff --git a/drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map b/drivers/compress/octeontx/version.map similarity index 100% rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map rename to drivers/compress/octeontx/version.map diff --git a/drivers/compress/zlib/rte_pmd_zlib_version.map b/drivers/compress/zlib/version.map similarity index 100% rename from drivers/compress/zlib/rte_pmd_zlib_version.map rename to drivers/compress/zlib/version.map diff --git a/drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map b/drivers/crypto/aesni_gcm/version.map similarity index 100% rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map rename to drivers/crypto/aesni_gcm/version.map diff --git a/drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map b/drivers/crypto/aesni_mb/version.map similarity index 100% rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map rename to drivers/crypto/aesni_mb/version.map diff --git a/drivers/crypto/armv8/rte_pmd_armv8_version.map b/drivers/crypto/armv8/version.map similarity index 100% rename from drivers/crypto/armv8/rte_pmd_armv8_version.map rename to drivers/crypto/armv8/version.map diff --git a/drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map b/drivers/crypto/caam_jr/version.map similarity index 100% rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map rename to drivers/crypto/caam_jr/version.map diff --git a/drivers/crypto/ccp/rte_pmd_ccp_version.map b/drivers/crypto/ccp/version.map similarity index 100% rename from drivers/crypto/ccp/rte_pmd_ccp_version.map rename to drivers/crypto/ccp/version.map diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/version.map similarity index 100% rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map rename to drivers/crypto/dpaa2_sec/version.map diff --git a/drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map b/drivers/crypto/dpaa_sec/version.map similarity index 100% rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map rename to drivers/crypto/dpaa_sec/version.map diff --git a/drivers/crypto/kasumi/rte_pmd_kasumi_version.map b/drivers/crypto/kasumi/version.map similarity index 100% rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map rename to drivers/crypto/kasumi/version.map diff --git a/drivers/crypto/mvsam/rte_pmd_mvsam_version.map b/drivers/crypto/mvsam/version.map similarity index 100% rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map rename to drivers/crypto/mvsam/version.map diff --git a/drivers/crypto/nitrox/rte_pmd_nitrox_version.map b/drivers/crypto/nitrox/version.map similarity index 100% rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map rename to drivers/crypto/nitrox/version.map diff --git a/drivers/crypto/null/rte_pmd_null_crypto_version.map b/drivers/crypto/null/version.map similarity index 100% rename from drivers/crypto/null/rte_pmd_null_crypto_version.map rename to drivers/crypto/null/version.map diff --git a/drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map b/drivers/crypto/octeontx/version.map similarity index 100% rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map rename to drivers/crypto/octeontx/version.map diff --git a/drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map b/drivers/crypto/octeontx2/version.map similarity index 100% rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map rename to drivers/crypto/octeontx2/version.map diff --git a/drivers/crypto/openssl/rte_pmd_openssl_version.map b/drivers/crypto/openssl/version.map similarity index 100% rename from drivers/crypto/openssl/rte_pmd_openssl_version.map rename to drivers/crypto/openssl/version.map diff --git a/drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map b/drivers/crypto/scheduler/version.map similarity index 100% rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map rename to drivers/crypto/scheduler/version.map diff --git a/drivers/crypto/snow3g/rte_pmd_snow3g_version.map b/drivers/crypto/snow3g/version.map similarity index 100% rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map rename to drivers/crypto/snow3g/version.map diff --git a/drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map b/drivers/crypto/virtio/version.map similarity index 100% rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map rename to drivers/crypto/virtio/version.map diff --git a/drivers/crypto/zuc/rte_pmd_zuc_version.map b/drivers/crypto/zuc/version.map similarity index 100% rename from drivers/crypto/zuc/rte_pmd_zuc_version.map rename to drivers/crypto/zuc/version.map diff --git a/drivers/event/dpaa/rte_pmd_dpaa_event_version.map b/drivers/event/dpaa/version.map similarity index 100% rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map rename to drivers/event/dpaa/version.map diff --git a/drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map b/drivers/event/dpaa2/version.map similarity index 100% rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map rename to drivers/event/dpaa2/version.map diff --git a/drivers/event/dsw/rte_pmd_dsw_event_version.map b/drivers/event/dsw/version.map similarity index 100% rename from drivers/event/dsw/rte_pmd_dsw_event_version.map rename to drivers/event/dsw/version.map diff --git a/drivers/event/octeontx/rte_pmd_octeontx_event_version.map b/drivers/event/octeontx/version.map similarity index 100% rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map rename to drivers/event/octeontx/version.map diff --git a/drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map b/drivers/event/octeontx2/version.map similarity index 100% rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map rename to drivers/event/octeontx2/version.map diff --git a/drivers/event/opdl/rte_pmd_opdl_event_version.map b/drivers/event/opdl/version.map similarity index 100% rename from drivers/event/opdl/rte_pmd_opdl_event_version.map rename to drivers/event/opdl/version.map diff --git a/drivers/event/skeleton/rte_pmd_skeleton_event_version.map b/drivers/event/skeleton/version.map similarity index 100% rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map rename to drivers/event/skeleton/version.map diff --git a/drivers/event/sw/rte_pmd_sw_event_version.map b/drivers/event/sw/version.map similarity index 100% rename from drivers/event/sw/rte_pmd_sw_event_version.map rename to drivers/event/sw/version.map diff --git a/drivers/mempool/bucket/rte_mempool_bucket_version.map b/drivers/mempool/bucket/version.map similarity index 100% rename from drivers/mempool/bucket/rte_mempool_bucket_version.map rename to drivers/mempool/bucket/version.map diff --git a/drivers/mempool/dpaa/rte_mempool_dpaa_version.map b/drivers/mempool/dpaa/version.map similarity index 100% rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map rename to drivers/mempool/dpaa/version.map diff --git a/drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map b/drivers/mempool/dpaa2/version.map similarity index 100% rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map rename to drivers/mempool/dpaa2/version.map diff --git a/drivers/mempool/octeontx/rte_mempool_octeontx_version.map b/drivers/mempool/octeontx/version.map similarity index 100% rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map rename to drivers/mempool/octeontx/version.map diff --git a/drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map b/drivers/mempool/octeontx2/version.map similarity index 100% rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map rename to drivers/mempool/octeontx2/version.map diff --git a/drivers/mempool/ring/rte_mempool_ring_version.map b/drivers/mempool/ring/version.map similarity index 100% rename from drivers/mempool/ring/rte_mempool_ring_version.map rename to drivers/mempool/ring/version.map diff --git a/drivers/mempool/stack/rte_mempool_stack_version.map b/drivers/mempool/stack/version.map similarity index 100% rename from drivers/mempool/stack/rte_mempool_stack_version.map rename to drivers/mempool/stack/version.map diff --git a/drivers/meson.build b/drivers/meson.build index b95b00583..3d4bbff13 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -166,9 +166,9 @@ foreach subpath:subdirs install: true) # now build the shared driver - version_map = '@0@/@1@/@2@_version.map'.format( + version_map = '@0@/@1@/version.map'.format( meson.current_source_dir(), - drv_path, lib_name) + drv_path) implib = 'lib' + lib_name + '.dll.a' def_file = custom_target(lib_name + '_def', diff --git a/drivers/net/af_packet/rte_pmd_af_packet_version.map b/drivers/net/af_packet/version.map similarity index 100% rename from drivers/net/af_packet/rte_pmd_af_packet_version.map rename to drivers/net/af_packet/version.map diff --git a/drivers/net/af_xdp/rte_pmd_af_xdp_version.map b/drivers/net/af_xdp/version.map similarity index 100% rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map rename to drivers/net/af_xdp/version.map diff --git a/drivers/net/ark/rte_pmd_ark_version.map b/drivers/net/ark/version.map similarity index 100% rename from drivers/net/ark/rte_pmd_ark_version.map rename to drivers/net/ark/version.map diff --git a/drivers/net/atlantic/rte_pmd_atlantic_version.map b/drivers/net/atlantic/version.map similarity index 100% rename from drivers/net/atlantic/rte_pmd_atlantic_version.map rename to drivers/net/atlantic/version.map diff --git a/drivers/net/avp/rte_pmd_avp_version.map b/drivers/net/avp/version.map similarity index 100% rename from drivers/net/avp/rte_pmd_avp_version.map rename to drivers/net/avp/version.map diff --git a/drivers/net/axgbe/rte_pmd_axgbe_version.map b/drivers/net/axgbe/version.map similarity index 100% rename from drivers/net/axgbe/rte_pmd_axgbe_version.map rename to drivers/net/axgbe/version.map diff --git a/drivers/net/bnx2x/rte_pmd_bnx2x_version.map b/drivers/net/bnx2x/version.map similarity index 100% rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map rename to drivers/net/bnx2x/version.map diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/version.map similarity index 100% rename from drivers/net/bnxt/rte_pmd_bnxt_version.map rename to drivers/net/bnxt/version.map diff --git a/drivers/net/bonding/rte_pmd_bond_version.map b/drivers/net/bonding/version.map similarity index 100% rename from drivers/net/bonding/rte_pmd_bond_version.map rename to drivers/net/bonding/version.map diff --git a/drivers/net/cxgbe/rte_pmd_cxgbe_version.map b/drivers/net/cxgbe/version.map similarity index 100% rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map rename to drivers/net/cxgbe/version.map diff --git a/drivers/net/dpaa/rte_pmd_dpaa_version.map b/drivers/net/dpaa/version.map similarity index 100% rename from drivers/net/dpaa/rte_pmd_dpaa_version.map rename to drivers/net/dpaa/version.map diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map b/drivers/net/dpaa2/version.map similarity index 100% rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map rename to drivers/net/dpaa2/version.map diff --git a/drivers/net/e1000/rte_pmd_e1000_version.map b/drivers/net/e1000/version.map similarity index 100% rename from drivers/net/e1000/rte_pmd_e1000_version.map rename to drivers/net/e1000/version.map diff --git a/drivers/net/ena/rte_pmd_ena_version.map b/drivers/net/ena/version.map similarity index 100% rename from drivers/net/ena/rte_pmd_ena_version.map rename to drivers/net/ena/version.map diff --git a/drivers/net/enetc/rte_pmd_enetc_version.map b/drivers/net/enetc/version.map similarity index 100% rename from drivers/net/enetc/rte_pmd_enetc_version.map rename to drivers/net/enetc/version.map diff --git a/drivers/net/enic/rte_pmd_enic_version.map b/drivers/net/enic/version.map similarity index 100% rename from drivers/net/enic/rte_pmd_enic_version.map rename to drivers/net/enic/version.map diff --git a/drivers/net/failsafe/rte_pmd_failsafe_version.map b/drivers/net/failsafe/version.map similarity index 100% rename from drivers/net/failsafe/rte_pmd_failsafe_version.map rename to drivers/net/failsafe/version.map diff --git a/drivers/net/fm10k/rte_pmd_fm10k_version.map b/drivers/net/fm10k/version.map similarity index 100% rename from drivers/net/fm10k/rte_pmd_fm10k_version.map rename to drivers/net/fm10k/version.map diff --git a/drivers/net/hinic/rte_pmd_hinic_version.map b/drivers/net/hinic/version.map similarity index 100% rename from drivers/net/hinic/rte_pmd_hinic_version.map rename to drivers/net/hinic/version.map diff --git a/drivers/net/hns3/rte_pmd_hns3_version.map b/drivers/net/hns3/version.map similarity index 100% rename from drivers/net/hns3/rte_pmd_hns3_version.map rename to drivers/net/hns3/version.map diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/version.map similarity index 100% rename from drivers/net/i40e/rte_pmd_i40e_version.map rename to drivers/net/i40e/version.map diff --git a/drivers/net/iavf/rte_pmd_iavf_version.map b/drivers/net/iavf/version.map similarity index 100% rename from drivers/net/iavf/rte_pmd_iavf_version.map rename to drivers/net/iavf/version.map diff --git a/drivers/net/ice/rte_pmd_ice_version.map b/drivers/net/ice/version.map similarity index 100% rename from drivers/net/ice/rte_pmd_ice_version.map rename to drivers/net/ice/version.map diff --git a/drivers/net/igc/rte_pmd_igc_version.map b/drivers/net/igc/version.map similarity index 100% rename from drivers/net/igc/rte_pmd_igc_version.map rename to drivers/net/igc/version.map diff --git a/drivers/net/ionic/rte_pmd_ionic_version.map b/drivers/net/ionic/version.map similarity index 100% rename from drivers/net/ionic/rte_pmd_ionic_version.map rename to drivers/net/ionic/version.map diff --git a/drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map b/drivers/net/ipn3ke/version.map similarity index 100% rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map rename to drivers/net/ipn3ke/version.map diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/version.map similarity index 100% rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map rename to drivers/net/ixgbe/version.map diff --git a/drivers/net/kni/rte_pmd_kni_version.map b/drivers/net/kni/version.map similarity index 100% rename from drivers/net/kni/rte_pmd_kni_version.map rename to drivers/net/kni/version.map diff --git a/drivers/net/liquidio/rte_pmd_liquidio_version.map b/drivers/net/liquidio/version.map similarity index 100% rename from drivers/net/liquidio/rte_pmd_liquidio_version.map rename to drivers/net/liquidio/version.map diff --git a/drivers/net/memif/rte_pmd_memif_version.map b/drivers/net/memif/version.map similarity index 100% rename from drivers/net/memif/rte_pmd_memif_version.map rename to drivers/net/memif/version.map diff --git a/drivers/net/mlx4/rte_pmd_mlx4_version.map b/drivers/net/mlx4/version.map similarity index 100% rename from drivers/net/mlx4/rte_pmd_mlx4_version.map rename to drivers/net/mlx4/version.map diff --git a/drivers/net/mlx5/rte_pmd_mlx5_version.map b/drivers/net/mlx5/version.map similarity index 100% rename from drivers/net/mlx5/rte_pmd_mlx5_version.map rename to drivers/net/mlx5/version.map diff --git a/drivers/net/mvneta/rte_pmd_mvneta_version.map b/drivers/net/mvneta/version.map similarity index 100% rename from drivers/net/mvneta/rte_pmd_mvneta_version.map rename to drivers/net/mvneta/version.map diff --git a/drivers/net/mvpp2/rte_pmd_mvpp2_version.map b/drivers/net/mvpp2/version.map similarity index 100% rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map rename to drivers/net/mvpp2/version.map diff --git a/drivers/net/netvsc/rte_pmd_netvsc_version.map b/drivers/net/netvsc/version.map similarity index 100% rename from drivers/net/netvsc/rte_pmd_netvsc_version.map rename to drivers/net/netvsc/version.map diff --git a/drivers/net/nfb/rte_pmd_nfb_version.map b/drivers/net/nfb/version.map similarity index 100% rename from drivers/net/nfb/rte_pmd_nfb_version.map rename to drivers/net/nfb/version.map diff --git a/drivers/net/nfp/rte_pmd_nfp_version.map b/drivers/net/nfp/version.map similarity index 100% rename from drivers/net/nfp/rte_pmd_nfp_version.map rename to drivers/net/nfp/version.map diff --git a/drivers/net/null/rte_pmd_null_version.map b/drivers/net/null/version.map similarity index 100% rename from drivers/net/null/rte_pmd_null_version.map rename to drivers/net/null/version.map diff --git a/drivers/net/octeontx/rte_pmd_octeontx_version.map b/drivers/net/octeontx/version.map similarity index 100% rename from drivers/net/octeontx/rte_pmd_octeontx_version.map rename to drivers/net/octeontx/version.map diff --git a/drivers/net/octeontx2/rte_pmd_octeontx2_version.map b/drivers/net/octeontx2/version.map similarity index 100% rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map rename to drivers/net/octeontx2/version.map diff --git a/drivers/net/pcap/rte_pmd_pcap_version.map b/drivers/net/pcap/version.map similarity index 100% rename from drivers/net/pcap/rte_pmd_pcap_version.map rename to drivers/net/pcap/version.map diff --git a/drivers/net/pfe/rte_pmd_pfe_version.map b/drivers/net/pfe/version.map similarity index 100% rename from drivers/net/pfe/rte_pmd_pfe_version.map rename to drivers/net/pfe/version.map diff --git a/drivers/net/qede/rte_pmd_qede_version.map b/drivers/net/qede/version.map similarity index 100% rename from drivers/net/qede/rte_pmd_qede_version.map rename to drivers/net/qede/version.map diff --git a/drivers/net/ring/rte_pmd_ring_version.map b/drivers/net/ring/version.map similarity index 100% rename from drivers/net/ring/rte_pmd_ring_version.map rename to drivers/net/ring/version.map diff --git a/drivers/net/sfc/rte_pmd_sfc_version.map b/drivers/net/sfc/version.map similarity index 100% rename from drivers/net/sfc/rte_pmd_sfc_version.map rename to drivers/net/sfc/version.map diff --git a/drivers/net/softnic/rte_pmd_softnic_version.map b/drivers/net/softnic/version.map similarity index 100% rename from drivers/net/softnic/rte_pmd_softnic_version.map rename to drivers/net/softnic/version.map diff --git a/drivers/net/szedata2/rte_pmd_szedata2_version.map b/drivers/net/szedata2/version.map similarity index 100% rename from drivers/net/szedata2/rte_pmd_szedata2_version.map rename to drivers/net/szedata2/version.map diff --git a/drivers/net/tap/rte_pmd_tap_version.map b/drivers/net/tap/version.map similarity index 100% rename from drivers/net/tap/rte_pmd_tap_version.map rename to drivers/net/tap/version.map diff --git a/drivers/net/thunderx/rte_pmd_thunderx_version.map b/drivers/net/thunderx/version.map similarity index 100% rename from drivers/net/thunderx/rte_pmd_thunderx_version.map rename to drivers/net/thunderx/version.map diff --git a/drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map b/drivers/net/vdev_netvsc/version.map similarity index 100% rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map rename to drivers/net/vdev_netvsc/version.map diff --git a/drivers/net/vhost/rte_pmd_vhost_version.map b/drivers/net/vhost/version.map similarity index 100% rename from drivers/net/vhost/rte_pmd_vhost_version.map rename to drivers/net/vhost/version.map diff --git a/drivers/net/virtio/rte_pmd_virtio_version.map b/drivers/net/virtio/version.map similarity index 100% rename from drivers/net/virtio/rte_pmd_virtio_version.map rename to drivers/net/virtio/version.map diff --git a/drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map b/drivers/net/vmxnet3/version.map similarity index 100% rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map rename to drivers/net/vmxnet3/version.map diff --git a/drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map b/drivers/raw/dpaa2_cmdif/version.map similarity index 100% rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map rename to drivers/raw/dpaa2_cmdif/version.map diff --git a/drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map b/drivers/raw/dpaa2_qdma/version.map similarity index 100% rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map rename to drivers/raw/dpaa2_qdma/version.map diff --git a/drivers/raw/ifpga/rte_rawdev_ifpga_version.map b/drivers/raw/ifpga/version.map similarity index 100% rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map rename to drivers/raw/ifpga/version.map diff --git a/drivers/raw/ioat/rte_rawdev_ioat_version.map b/drivers/raw/ioat/version.map similarity index 100% rename from drivers/raw/ioat/rte_rawdev_ioat_version.map rename to drivers/raw/ioat/version.map diff --git a/drivers/raw/ntb/rte_rawdev_ntb_version.map b/drivers/raw/ntb/version.map similarity index 100% rename from drivers/raw/ntb/rte_rawdev_ntb_version.map rename to drivers/raw/ntb/version.map diff --git a/drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map b/drivers/raw/octeontx2_dma/version.map similarity index 100% rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map rename to drivers/raw/octeontx2_dma/version.map diff --git a/drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map b/drivers/raw/octeontx2_ep/version.map similarity index 100% rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map rename to drivers/raw/octeontx2_ep/version.map diff --git a/drivers/raw/skeleton/rte_rawdev_skeleton_version.map b/drivers/raw/skeleton/version.map similarity index 100% rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map rename to drivers/raw/skeleton/version.map diff --git a/drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map b/drivers/regex/mlx5/version.map similarity index 100% rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map rename to drivers/regex/mlx5/version.map diff --git a/drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map b/drivers/regex/octeontx2/version.map similarity index 100% rename from drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map rename to drivers/regex/octeontx2/version.map diff --git a/drivers/vdpa/ifc/rte_pmd_ifc_version.map b/drivers/vdpa/ifc/version.map similarity index 100% rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map rename to drivers/vdpa/ifc/version.map diff --git a/drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map b/drivers/vdpa/mlx5/version.map similarity index 100% rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map rename to drivers/vdpa/mlx5/version.map diff --git a/lib/librte_acl/rte_acl_version.map b/lib/librte_acl/version.map similarity index 100% rename from lib/librte_acl/rte_acl_version.map rename to lib/librte_acl/version.map diff --git a/lib/librte_bbdev/rte_bbdev_version.map b/lib/librte_bbdev/version.map similarity index 100% rename from lib/librte_bbdev/rte_bbdev_version.map rename to lib/librte_bbdev/version.map diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/version.map similarity index 100% rename from lib/librte_bitratestats/rte_bitratestats_version.map rename to lib/librte_bitratestats/version.map diff --git a/lib/librte_bpf/rte_bpf_version.map b/lib/librte_bpf/version.map similarity index 100% rename from lib/librte_bpf/rte_bpf_version.map rename to lib/librte_bpf/version.map diff --git a/lib/librte_cfgfile/rte_cfgfile_version.map b/lib/librte_cfgfile/version.map similarity index 100% rename from lib/librte_cfgfile/rte_cfgfile_version.map rename to lib/librte_cfgfile/version.map diff --git a/lib/librte_cmdline/rte_cmdline_version.map b/lib/librte_cmdline/version.map similarity index 100% rename from lib/librte_cmdline/rte_cmdline_version.map rename to lib/librte_cmdline/version.map diff --git a/lib/librte_compressdev/rte_compressdev_version.map b/lib/librte_compressdev/version.map similarity index 100% rename from lib/librte_compressdev/rte_compressdev_version.map rename to lib/librte_compressdev/version.map diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/version.map similarity index 100% rename from lib/librte_cryptodev/rte_cryptodev_version.map rename to lib/librte_cryptodev/version.map diff --git a/lib/librte_distributor/rte_distributor_version.map b/lib/librte_distributor/version.map similarity index 100% rename from lib/librte_distributor/rte_distributor_version.map rename to lib/librte_distributor/version.map diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/version.map similarity index 100% rename from lib/librte_eal/rte_eal_version.map rename to lib/librte_eal/version.map diff --git a/lib/librte_efd/rte_efd_version.map b/lib/librte_efd/version.map similarity index 100% rename from lib/librte_efd/rte_efd_version.map rename to lib/librte_efd/version.map diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/version.map similarity index 100% rename from lib/librte_ethdev/rte_ethdev_version.map rename to lib/librte_ethdev/version.map diff --git a/lib/librte_eventdev/rte_eventdev_version.map b/lib/librte_eventdev/version.map similarity index 100% rename from lib/librte_eventdev/rte_eventdev_version.map rename to lib/librte_eventdev/version.map diff --git a/lib/librte_fib/rte_fib_version.map b/lib/librte_fib/version.map similarity index 100% rename from lib/librte_fib/rte_fib_version.map rename to lib/librte_fib/version.map diff --git a/lib/librte_flow_classify/rte_flow_classify_version.map b/lib/librte_flow_classify/version.map similarity index 100% rename from lib/librte_flow_classify/rte_flow_classify_version.map rename to lib/librte_flow_classify/version.map diff --git a/lib/librte_graph/rte_graph_version.map b/lib/librte_graph/version.map similarity index 100% rename from lib/librte_graph/rte_graph_version.map rename to lib/librte_graph/version.map diff --git a/lib/librte_gro/rte_gro_version.map b/lib/librte_gro/version.map similarity index 100% rename from lib/librte_gro/rte_gro_version.map rename to lib/librte_gro/version.map diff --git a/lib/librte_gso/rte_gso_version.map b/lib/librte_gso/version.map similarity index 100% rename from lib/librte_gso/rte_gso_version.map rename to lib/librte_gso/version.map diff --git a/lib/librte_hash/rte_hash_version.map b/lib/librte_hash/version.map similarity index 100% rename from lib/librte_hash/rte_hash_version.map rename to lib/librte_hash/version.map diff --git a/lib/librte_ip_frag/rte_ip_frag_version.map b/lib/librte_ip_frag/version.map similarity index 100% rename from lib/librte_ip_frag/rte_ip_frag_version.map rename to lib/librte_ip_frag/version.map diff --git a/lib/librte_ipsec/rte_ipsec_version.map b/lib/librte_ipsec/version.map similarity index 100% rename from lib/librte_ipsec/rte_ipsec_version.map rename to lib/librte_ipsec/version.map diff --git a/lib/librte_jobstats/rte_jobstats_version.map b/lib/librte_jobstats/version.map similarity index 100% rename from lib/librte_jobstats/rte_jobstats_version.map rename to lib/librte_jobstats/version.map diff --git a/lib/librte_kni/rte_kni_version.map b/lib/librte_kni/version.map similarity index 100% rename from lib/librte_kni/rte_kni_version.map rename to lib/librte_kni/version.map diff --git a/lib/librte_kvargs/rte_kvargs_version.map b/lib/librte_kvargs/version.map similarity index 100% rename from lib/librte_kvargs/rte_kvargs_version.map rename to lib/librte_kvargs/version.map diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/version.map similarity index 100% rename from lib/librte_latencystats/rte_latencystats_version.map rename to lib/librte_latencystats/version.map diff --git a/lib/librte_lpm/rte_lpm_version.map b/lib/librte_lpm/version.map similarity index 100% rename from lib/librte_lpm/rte_lpm_version.map rename to lib/librte_lpm/version.map diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/version.map similarity index 100% rename from lib/librte_mbuf/rte_mbuf_version.map rename to lib/librte_mbuf/version.map diff --git a/lib/librte_member/rte_member_version.map b/lib/librte_member/version.map similarity index 100% rename from lib/librte_member/rte_member_version.map rename to lib/librte_member/version.map diff --git a/lib/librte_mempool/rte_mempool_version.map b/lib/librte_mempool/version.map similarity index 100% rename from lib/librte_mempool/rte_mempool_version.map rename to lib/librte_mempool/version.map diff --git a/lib/librte_meter/rte_meter_version.map b/lib/librte_meter/version.map similarity index 100% rename from lib/librte_meter/rte_meter_version.map rename to lib/librte_meter/version.map diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/version.map similarity index 100% rename from lib/librte_metrics/rte_metrics_version.map rename to lib/librte_metrics/version.map diff --git a/lib/librte_net/rte_net_version.map b/lib/librte_net/version.map similarity index 100% rename from lib/librte_net/rte_net_version.map rename to lib/librte_net/version.map diff --git a/lib/librte_node/rte_node_version.map b/lib/librte_node/version.map similarity index 100% rename from lib/librte_node/rte_node_version.map rename to lib/librte_node/version.map diff --git a/lib/librte_pci/rte_pci_version.map b/lib/librte_pci/version.map similarity index 100% rename from lib/librte_pci/rte_pci_version.map rename to lib/librte_pci/version.map diff --git a/lib/librte_pdump/rte_pdump_version.map b/lib/librte_pdump/version.map similarity index 100% rename from lib/librte_pdump/rte_pdump_version.map rename to lib/librte_pdump/version.map diff --git a/lib/librte_pipeline/rte_pipeline_version.map b/lib/librte_pipeline/version.map similarity index 100% rename from lib/librte_pipeline/rte_pipeline_version.map rename to lib/librte_pipeline/version.map diff --git a/lib/librte_port/rte_port_version.map b/lib/librte_port/version.map similarity index 100% rename from lib/librte_port/rte_port_version.map rename to lib/librte_port/version.map diff --git a/lib/librte_power/rte_power_version.map b/lib/librte_power/version.map similarity index 100% rename from lib/librte_power/rte_power_version.map rename to lib/librte_power/version.map diff --git a/lib/librte_rawdev/rte_rawdev_version.map b/lib/librte_rawdev/version.map similarity index 100% rename from lib/librte_rawdev/rte_rawdev_version.map rename to lib/librte_rawdev/version.map diff --git a/lib/librte_rcu/rte_rcu_version.map b/lib/librte_rcu/version.map similarity index 100% rename from lib/librte_rcu/rte_rcu_version.map rename to lib/librte_rcu/version.map diff --git a/lib/librte_regexdev/rte_regexdev_version.map b/lib/librte_regexdev/version.map similarity index 100% rename from lib/librte_regexdev/rte_regexdev_version.map rename to lib/librte_regexdev/version.map diff --git a/lib/librte_reorder/rte_reorder_version.map b/lib/librte_reorder/version.map similarity index 100% rename from lib/librte_reorder/rte_reorder_version.map rename to lib/librte_reorder/version.map diff --git a/lib/librte_rib/rte_rib_version.map b/lib/librte_rib/version.map similarity index 100% rename from lib/librte_rib/rte_rib_version.map rename to lib/librte_rib/version.map diff --git a/lib/librte_ring/rte_ring_version.map b/lib/librte_ring/version.map similarity index 100% rename from lib/librte_ring/rte_ring_version.map rename to lib/librte_ring/version.map diff --git a/lib/librte_sched/rte_sched_version.map b/lib/librte_sched/version.map similarity index 100% rename from lib/librte_sched/rte_sched_version.map rename to lib/librte_sched/version.map diff --git a/lib/librte_security/rte_security_version.map b/lib/librte_security/version.map similarity index 100% rename from lib/librte_security/rte_security_version.map rename to lib/librte_security/version.map diff --git a/lib/librte_stack/rte_stack_version.map b/lib/librte_stack/version.map similarity index 100% rename from lib/librte_stack/rte_stack_version.map rename to lib/librte_stack/version.map diff --git a/lib/librte_table/rte_table_version.map b/lib/librte_table/version.map similarity index 100% rename from lib/librte_table/rte_table_version.map rename to lib/librte_table/version.map diff --git a/lib/librte_telemetry/rte_telemetry_version.map b/lib/librte_telemetry/version.map similarity index 100% rename from lib/librte_telemetry/rte_telemetry_version.map rename to lib/librte_telemetry/version.map diff --git a/lib/librte_timer/rte_timer_version.map b/lib/librte_timer/version.map similarity index 100% rename from lib/librte_timer/rte_timer_version.map rename to lib/librte_timer/version.map diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/version.map similarity index 100% rename from lib/librte_vhost/rte_vhost_version.map rename to lib/librte_vhost/version.map diff --git a/lib/meson.build b/lib/meson.build index 40a8a822f..a42e34f54 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -140,8 +140,8 @@ foreach l:libraries # RTE_BUILD_SHARED_LIB defined cflags += '-DRTE_BUILD_SHARED_LIB' endif - version_map = '@0@/@1@/rte_@2@_version.map'.format( - meson.current_source_dir(), dir_name, name) + version_map = '@0@/@1@/version.map'.format( + meson.current_source_dir(), dir_name) implib = dir_name + '.dll.a' def_file = custom_target(libname + '_def', -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename Bruce Richardson @ 2020-10-15 15:28 ` Andrew Rybchenko 2020-10-19 20:04 ` Thomas Monjalon 2020-10-18 9:24 ` Xu, Rosen 1 sibling, 1 reply; 82+ messages in thread From: Andrew Rybchenko @ 2020-10-15 15:28 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Ray Kinsella, Neil Horman, Nicolas Chautru, Hemant Agrawal, Sachin Saxena, Rosen Xu, Stephen Hemminger, Long Li, Anoob Joseph, Jingjing Wu, Beilei Xing, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, John Griffin, Fiona Trahe, Deepak Kumar Jain, Lee Daly, Ashish Gupta, Sunila Sahu, Declan Doherty, Pablo de Lara, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Fan Zhang, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Liang Ma, Peter Mccarthy, Harry van Haaren, Artem V. Andreev, Olivier Matz, Gage Eads, John W. Linville, Ciara Loftus, Qi Zhang, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Jeff Guo, Haiyue Wang, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Xiao Wang, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Qiming Yang, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Jasvinder Singh, Cristian Dumitrescu, Keith Wiles, Maciej Czekaj, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Yong Wang, Tianfei zhang, Xiaoyun Li, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Konstantin Ananyev, David Hunt, Byron Marohn, Yipeng Wang, Vladimir Medvedkin, Bernard Iremonger, Jiayu Hu, Sameh Gobriel, Reshma Pattan, Honnappa Nagarahalli, Kevin Laatz, Robert Sanford, Erik Gabriel Carrillo On 10/15/20 6:05 PM, Bruce Richardson wrote: > Since each version map file is contained in the subdirectory of the library > it refers to, there is no need to include the library name in the filename. > This makes things simpler in case of library renaming. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru> ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename 2020-10-15 15:28 ` Andrew Rybchenko @ 2020-10-19 20:04 ` Thomas Monjalon 0 siblings, 0 replies; 82+ messages in thread From: Thomas Monjalon @ 2020-10-19 20:04 UTC (permalink / raw) To: Bruce Richardson Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca, Ray Kinsella, Neil Horman, Nicolas Chautru, Hemant Agrawal, Sachin Saxena, Rosen Xu, Stephen Hemminger, Long Li, Anoob Joseph, Jingjing Wu, Beilei Xing, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, John Griffin, Fiona Trahe, Deepak Kumar Jain, Lee Daly, Ashish Gupta, Sunila Sahu, Declan Doherty, Pablo de Lara, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Fan Zhang, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Liang Ma, Peter Mccarthy, Harry van Haaren, Artem V. Andreev, Olivier Matz, Gage Eads, John W. Linville, Ciara Loftus, Qi Zhang, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Jeff Guo, Haiyue Wang, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Xiao Wang, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Qiming Yang, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Jasvinder Singh, Cristian Dumitrescu, Keith Wiles, Maciej Czekaj, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Yong Wang, Tianfei zhang, Xiaoyun Li, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Konstantin Ananyev, David Hunt, Byron Marohn, Yipeng Wang, Vladimir Medvedkin, Bernard Iremonger, Jiayu Hu, Sameh Gobriel, Reshma Pattan, Honnappa Nagarahalli, Kevin Laatz, Robert Sanford, Erik Gabriel Carrillo, Andrew Rybchenko, Omar Cardona 15/10/2020 17:28, Andrew Rybchenko: > On 10/15/20 6:05 PM, Bruce Richardson wrote: > > Since each version map file is contained in the subdirectory of the library > > it refers to, there is no need to include the library name in the filename. > > This makes things simpler in case of library renaming. > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > Acked-by: Luca Boccassi <bluca@debian.org> > > Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru> It is missing some changes in MAINTAINERS and in some scripts, especially devtools/check-symbol-maps.sh which was failing with the recent change for Windows def files from David. I've fixed them while merging. I hope Windows clang compilation will work fine. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename Bruce Richardson 2020-10-15 15:28 ` Andrew Rybchenko @ 2020-10-18 9:24 ` Xu, Rosen 1 sibling, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 9:24 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Ray Kinsella, Neil Horman, Chautru, Nicolas, Hemant Agrawal, Sachin Saxena, Stephen Hemminger, Long Li, Anoob Joseph, Wu, Jingjing, Xing, Beilei, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Liron Himi, Harman Kalra, Jerin Jacob, Nithin Dabilpuram, Griffin, John, Trahe, Fiona, Jain, Deepak K, Andrew Rybchenko, Daly, Lee, Ashish Gupta, Sunila Sahu, Doherty, Declan, De Lara Guarch, Pablo, Ruifeng Wang, Gagandeep Singh, Somalapuram Amaranath, Akhil Goyal, Michael Shamis, Nagadheeraj Rottela, Srikanth Jampala, Ankur Dwivedi, Zhang, Roy Fan, Jay Zhou, Nipun Gupta, Mattias Rönnblom, Pavan Nikhilesh, Ma, Liang J, Mccarthy, Peter, Van Haaren, Harry, Artem V. Andreev, Olivier Matz, Eads, Gage, John W. Linville, Loftus, Ciara, Zhang, Qi Z, Shepard Siegel, Ed Czeck, John Miller, Igor Russkikh, Pavel Belous, Steven Webster, Matt Peters, Rasesh Mody, Shahed Shaikh, Ajit Khaparde, Somnath Kotur, Chas Williams, Min Hu (Connor), Rahul Lakkireddy, Guo, Jia, Wang, Haiyue, Marcin Wojtas, Michal Krawczyk, Guy Tzalik, Evgeny Schemeilin, Igor Chauskin, John Daley, Hyong Youb Kim, Gaetan Rivet, Wang, Xiao W, Ziyang Xuan, Xiaoyun Wang, Guoyang Zhou, Wei Hu (Xavier), Yisen Zhuang, Yang, Qiming, Alfredo Cardigliano, Shijith Thotton, Srisivasubramanian Srinivasan, Jakub Grajciar, Zyta Szpak, K. Y. Srinivasan, Haiyang Zhang, Martin Spinler, Heinrich Kuhn, Tetsuya Mukawa, Kiran Kumar K, Singh, Jasvinder, Dumitrescu, Cristian, Wiles, Keith, Maciej Czekaj, Maxime Coquelin, Xia, Chenbo, Wang, Zhihong, Yong Wang, Zhang, Tianfei, Li, Xiaoyun, Satha Rao, Mahipal Challa, Ori Kam, Guy Kaneti, Ananyev, Konstantin, Hunt, David, Marohn, Byron, Wang, Yipeng1, Medvedkin, Vladimir, Iremonger, Bernard, Hu, Jiayu, Gobriel, Sameh, Pattan, Reshma, Honnappa Nagarahalli, Laatz, Kevin, Robert Sanford, Carrillo, Erik G On 10/15/20 6:05 PM, Bruce Richardson wrote: > Since each version map file is contained in the subdirectory of the > library it refers to, there is no need to include the library name in the filename. > This makes things simpler in case of library renaming. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (4 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-19 16:58 ` Thomas Monjalon 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson ` (2 subsequent siblings) 8 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Andrew Rybchenko Rather than specifying specific drivers in the driver directory to load, we can just pass in the whole driver directory to the "-d" EAL flag, causing all drivers to load. This makes the load of driver independent of any specific driver names. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- devtools/test-null.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/devtools/test-null.sh b/devtools/test-null.sh index 548de8113..1a6950f39 100755 --- a/devtools/test-null.sh +++ b/devtools/test-null.sh @@ -21,7 +21,7 @@ fi if ldd $testpmd | grep -q librte_ ; then export LD_LIBRARY_PATH=$build/drivers:$build/lib:$LD_LIBRARY_PATH - libs='-d librte_mempool_ring.so -d librte_pmd_null.so' + libs="-d $build/drivers" else libs= fi -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory Bruce Richardson @ 2020-10-19 16:58 ` Thomas Monjalon 2020-10-20 8:37 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: Thomas Monjalon @ 2020-10-19 16:58 UTC (permalink / raw) To: Bruce Richardson Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca, Andrew Rybchenko 15/10/2020 17:05, Bruce Richardson: > Rather than specifying specific drivers in the driver directory to load, we > can just pass in the whole driver directory to the "-d" EAL flag, causing > all drivers to load. This makes the load of driver independent of any > specific driver names. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > --- > --- a/devtools/test-null.sh > +++ b/devtools/test-null.sh > if ldd $testpmd | grep -q librte_ ; then > export LD_LIBRARY_PATH=$build/drivers:$build/lib:$LD_LIBRARY_PATH > - libs='-d librte_mempool_ring.so -d librte_pmd_null.so' > + libs="-d $build/drivers" In this case, can we remove $build/drivers from LD_LIBRARY_PATH? ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory 2020-10-19 16:58 ` Thomas Monjalon @ 2020-10-20 8:37 ` Bruce Richardson 2020-10-20 10:01 ` Thomas Monjalon 0 siblings, 1 reply; 82+ messages in thread From: Bruce Richardson @ 2020-10-20 8:37 UTC (permalink / raw) To: Thomas Monjalon Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca, Andrew Rybchenko On Mon, Oct 19, 2020 at 06:58:32PM +0200, Thomas Monjalon wrote: > 15/10/2020 17:05, Bruce Richardson: > > Rather than specifying specific drivers in the driver directory to load, we > > can just pass in the whole driver directory to the "-d" EAL flag, causing > > all drivers to load. This makes the load of driver independent of any > > specific driver names. > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > --- > > --- a/devtools/test-null.sh > > +++ b/devtools/test-null.sh > > if ldd $testpmd | grep -q librte_ ; then > > export LD_LIBRARY_PATH=$build/drivers:$build/lib:$LD_LIBRARY_PATH > > - libs='-d librte_mempool_ring.so -d librte_pmd_null.so' > > + libs="-d $build/drivers" > > In this case, can we remove $build/drivers from LD_LIBRARY_PATH? > I think it's safer to keep it, as some drivers depend upon others, e.g. many NIC/crypto/etc drivers depend upon pci or vdev bus drivers. Therefore depending on the order in which the drivers load, they will have unmet dependencies which will be found by looking in LD_LIBRARY_PATH /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory 2020-10-20 8:37 ` Bruce Richardson @ 2020-10-20 10:01 ` Thomas Monjalon 0 siblings, 0 replies; 82+ messages in thread From: Thomas Monjalon @ 2020-10-20 10:01 UTC (permalink / raw) To: Bruce Richardson Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca, Andrew Rybchenko 20/10/2020 10:37, Bruce Richardson: > On Mon, Oct 19, 2020 at 06:58:32PM +0200, Thomas Monjalon wrote: > > 15/10/2020 17:05, Bruce Richardson: > > > Rather than specifying specific drivers in the driver directory to load, we > > > can just pass in the whole driver directory to the "-d" EAL flag, causing > > > all drivers to load. This makes the load of driver independent of any > > > specific driver names. > > > > > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > > > --- > > > --- a/devtools/test-null.sh > > > +++ b/devtools/test-null.sh > > > if ldd $testpmd | grep -q librte_ ; then > > > export LD_LIBRARY_PATH=$build/drivers:$build/lib:$LD_LIBRARY_PATH > > > - libs='-d librte_mempool_ring.so -d librte_pmd_null.so' > > > + libs="-d $build/drivers" > > > > In this case, can we remove $build/drivers from LD_LIBRARY_PATH? > > > I think it's safer to keep it, as some drivers depend upon others, e.g. > many NIC/crypto/etc drivers depend upon pci or vdev bus drivers. Therefore > depending on the order in which the drivers load, they will have unmet > dependencies which will be found by looking in LD_LIBRARY_PATH Yes but this test is only for null PMD so I did the change. ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (5 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:32 ` Andrew Rybchenko ` (2 more replies) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson 2020-10-19 20:27 ` [dpdk-dev] [PATCH v5 0/8] Rework " Thomas Monjalon 8 siblings, 3 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Nicolas Chautru, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Fiona Trahe, John Griffin, Deepak Kumar Jain, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Fan Zhang, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Rosen Xu, Tianfei zhang, Chas Williams, Min Hu (Connor), Xiaoyun Li, Jingjing Wu, David Hunt, Andrew Rybchenko, Kiran Kumar K, Nithin Dabilpuram As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros. Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'. Similarly, for libraries, the equivalent name formats and macros are: 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc. To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> [1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u --- app/test-bbdev/meson.build | 4 ++-- app/test-crypto-perf/meson.build | 2 +- app/test-pmd/meson.build | 12 ++++++------ app/test/meson.build | 8 ++++---- doc/guides/rel_notes/deprecation.rst | 8 ++++++++ drivers/baseband/meson.build | 1 - drivers/bus/meson.build | 1 - drivers/common/meson.build | 1 - drivers/common/mlx5/meson.build | 1 - drivers/common/qat/meson.build | 1 - drivers/compress/meson.build | 1 - drivers/compress/octeontx/meson.build | 2 +- drivers/crypto/meson.build | 1 - drivers/crypto/null/meson.build | 2 +- drivers/crypto/octeontx/meson.build | 2 +- drivers/crypto/octeontx2/meson.build | 2 +- drivers/crypto/scheduler/meson.build | 2 +- drivers/crypto/virtio/meson.build | 2 +- drivers/event/dpaa/meson.build | 2 +- drivers/event/dpaa2/meson.build | 2 +- drivers/event/meson.build | 1 - drivers/event/octeontx/meson.build | 2 +- drivers/event/octeontx2/meson.build | 2 +- drivers/mempool/meson.build | 1 - drivers/meson.build | 9 ++++----- drivers/net/meson.build | 1 - drivers/net/mlx4/meson.build | 2 +- drivers/raw/ifpga/meson.build | 2 +- drivers/raw/meson.build | 1 - drivers/regex/meson.build | 1 - drivers/vdpa/meson.build | 1 - examples/bond/meson.build | 2 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/l2fwd-crypto/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vm_power_manager/meson.build | 6 +++--- lib/librte_ethdev/meson.build | 1 - lib/librte_graph/meson.build | 2 -- lib/meson.build | 3 ++- 40 files changed, 47 insertions(+), 55 deletions(-) diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 18ab6a8c6..178306b08 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -7,8 +7,8 @@ sources = files('main.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') - deps += ['pmd_bbdev_fpga_lte_fec'] + deps += ['baseband_fpga_lte_fec'] endif if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') - deps += ['pmd_bbdev_fpga_5gnr_fec'] + deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index 4bd71510d..e6ddda6f0 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -13,5 +13,5 @@ sources = files('cperf_ops.c', 'main.c') deps += ['cryptodev', 'net', 'security'] if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 0d9e45049..2e8b9f8a9 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') deps += 'latencystats' endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - deps += 'pmd_bond' + deps += 'net_bond' endif if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += 'pmd_bnxt' + deps += 'net_bnxt' endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += 'pmd_i40e' + deps += 'net_i40e' endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') - deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa'] + deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif if dpdk_conf.has('RTE_LIBRTE_BPF') sources += files('bpf_cmd.c') diff --git a/app/test/meson.build b/app/test/meson.build index fc90a1909..c5ce1d2c0 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -345,7 +345,7 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') test_deps += 'mempool_stack' endif if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') - test_deps += 'pmd_skeleton_event' + test_deps += 'event_skeleton' endif if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] @@ -355,7 +355,7 @@ endif # The following linkages of drivers are required because # they are used via a driver-specific API. if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') - test_deps += 'pmd_bond' + test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] if dpdk_conf.has('RTE_LIBRTE_RING_PMD') @@ -364,7 +364,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') endif endif if dpdk_conf.has('RTE_LIBRTE_RING_PMD') - test_deps += 'pmd_ring' + test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' test_sources += 'test_event_eth_tx_adapter.c' @@ -415,7 +415,7 @@ endif if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' - test_deps += 'pmd_crypto_scheduler' + test_deps += 'crypto_scheduler' endif foreach d:test_deps diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index a7d5c1bdc..6f1c03a16 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -11,6 +11,14 @@ here. Deprecation Notices ------------------- +* build: The macros defined to indicate which DPDK libraries and drivers + are included in the meson build are changing to a standardized format of + ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the + upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the + upper-case name of the device class to which a driver belongs e.g. + ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be + removed in a future release. + * meson: The minimum supported version of meson for configuring and building DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For those users with a version earlier than 0.47.1, an updated copy of meson diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build index 415b6724b..7e1b64ffd 100644 --- a/drivers/baseband/meson.build +++ b/drivers/baseband/meson.build @@ -8,4 +8,3 @@ endif drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec'] config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' -driver_name_fmt = 'rte_pmd_bbdev_@0@' diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build index 80de2d91d..bd73efd18 100644 --- a/drivers/bus/meson.build +++ b/drivers/bus/meson.build @@ -4,4 +4,3 @@ drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus'] std_deps = ['eal'] config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' -driver_name_fmt = 'rte_bus_@0@' diff --git a/drivers/common/meson.build b/drivers/common/meson.build index abb4f1529..d78882f05 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -8,4 +8,3 @@ endif std_deps = ['eal'] drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/mlx5/meson.build b/drivers/common/mlx5/meson.build index 8e5608703..3dacc6f68 100644 --- a/drivers/common/mlx5/meson.build +++ b/drivers/common/mlx5/meson.build @@ -8,7 +8,6 @@ if not is_linux endif config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mlx5_devx_cmds.c', diff --git a/drivers/common/qat/meson.build b/drivers/common/qat/meson.build index 3409162d0..fdf8b84f8 100644 --- a/drivers/common/qat/meson.build +++ b/drivers/common/qat/meson.build @@ -2,7 +2,6 @@ # Copyright(c) 2017-2018 Intel Corporation config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' -driver_name_fmt = 'rte_common_@0@' qat_crypto = true qat_crypto_path = 'crypto/qat' diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build index 3a4723c0c..33f5e33dd 100644 --- a/drivers/compress/meson.build +++ b/drivers/compress/meson.build @@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib'] std_deps = ['compressdev'] # compressdev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/compress/octeontx/meson.build b/drivers/compress/octeontx/meson.build index 0dc98b762..2d71b4da2 100644 --- a/drivers/compress/octeontx/meson.build +++ b/drivers/compress/octeontx/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cavium, Inc -name = 'octeontx_compress' +fmt_name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index bd7a940e6..fa5c7ef3a 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -26,4 +26,3 @@ drivers = ['aesni_gcm', std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/crypto/null/meson.build b/drivers/crypto/null/meson.build index 502336da2..421414916 100644 --- a/drivers/crypto/null/meson.build +++ b/drivers/crypto/null/meson.build @@ -2,5 +2,5 @@ # Copyright(c) 2017 Intel Corporation deps += 'bus_vdev' -name = 'null_crypto' +fmt_name = 'null_crypto' sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c') diff --git a/drivers/crypto/octeontx/meson.build b/drivers/crypto/octeontx/meson.build index cf031b006..d6939720d 100644 --- a/drivers/crypto/octeontx/meson.build +++ b/drivers/crypto/octeontx/meson.build @@ -7,7 +7,7 @@ endif deps += ['bus_pci'] deps += ['common_cpt'] -name = 'octeontx_crypto' +fmt_name = 'octeontx_crypto' sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', diff --git a/drivers/crypto/octeontx2/meson.build b/drivers/crypto/octeontx2/meson.build index 148ec184a..bf502e247 100644 --- a/drivers/crypto/octeontx2/meson.build +++ b/drivers/crypto/octeontx2/meson.build @@ -11,7 +11,7 @@ deps += ['common_cpt'] deps += ['common_octeontx2'] deps += ['ethdev'] deps += ['security'] -name = 'octeontx2_crypto' +fmt_name = 'octeontx2_crypto' sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', diff --git a/drivers/crypto/scheduler/meson.build b/drivers/crypto/scheduler/meson.build index c5ba2d680..2209c5023 100644 --- a/drivers/crypto/scheduler/meson.build +++ b/drivers/crypto/scheduler/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Luca Boccassi <bluca@debian.org> deps += ['bus_vdev', 'reorder'] -name = 'crypto_scheduler' +fmt_name = 'crypto_scheduler' sources = files( 'rte_cryptodev_scheduler.c', 'scheduler_failover.c', diff --git a/drivers/crypto/virtio/meson.build b/drivers/crypto/virtio/meson.build index b15b3f9fa..6cea782de 100644 --- a/drivers/crypto/virtio/meson.build +++ b/drivers/crypto/virtio/meson.build @@ -3,6 +3,6 @@ includes += include_directories('../../../lib/librte_vhost') deps += 'bus_pci' -name = 'virtio_crypto' +fmt_name = 'virtio_crypto' sources = files('virtio_cryptodev.c', 'virtio_pci.c', 'virtio_rxtx.c', 'virtqueue.c') diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build index 2f761f8e5..9abb75e3e 100644 --- a/drivers/event/dpaa/meson.build +++ b/drivers/event/dpaa/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['pmd_dpaa', 'pmd_dpaa_sec'] +deps += ['net_dpaa', 'crypto_dpaa_sec'] sources = files('dpaa_eventdev.c') includes += include_directories('../../crypto/dpaa_sec/') diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build index 71c8be3d6..4ead7bb3e 100644 --- a/drivers/event/dpaa2/meson.build +++ b/drivers/event/dpaa2/meson.build @@ -5,7 +5,7 @@ if not is_linux build = false reason = 'only supported on linux' endif -deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec'] +deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec'] sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') diff --git a/drivers/event/meson.build b/drivers/event/meson.build index f2a343147..a7dac99de 100644 --- a/drivers/event/meson.build +++ b/drivers/event/meson.build @@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and endif std_deps = ['eventdev', 'kvargs'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' -driver_name_fmt = 'rte_pmd_@0@_event' diff --git a/drivers/event/octeontx/meson.build b/drivers/event/octeontx/meson.build index 2b74bb62d..41e367684 100644 --- a/drivers/event/octeontx/meson.build +++ b/drivers/event/octeontx/meson.build @@ -10,4 +10,4 @@ sources = files('ssovf_worker.c', 'timvf_probe.c' ) -deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx'] +deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx'] diff --git a/drivers/event/octeontx2/meson.build b/drivers/event/octeontx2/meson.build index 0ade51cec..3e5eb37d2 100644 --- a/drivers/event/octeontx2/meson.build +++ b/drivers/event/octeontx2/meson.build @@ -24,6 +24,6 @@ foreach flag: extra_flags endif endforeach -deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2'] +deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2'] includes += include_directories('../../crypto/octeontx2') diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build index 7520e489f..a6ddd35b2 100644 --- a/drivers/mempool/meson.build +++ b/drivers/mempool/meson.build @@ -4,4 +4,3 @@ drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack'] std_deps = ['mempool'] config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' -driver_name_fmt = 'rte_mempool_@0@' diff --git a/drivers/meson.build b/drivers/meson.build index 3d4bbff13..a5a6fed06 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -33,9 +33,6 @@ foreach subpath:subdirs drivers = [] std_deps = [] config_flag_fmt = '' # format string used to set the value in dpdk_conf - driver_name_fmt = '' # format string for driver name, used to name - # the library, the dependency and to find the - # version file for linking # subpath can be either "class" or "class/driver" if subpath.contains('/') @@ -113,11 +110,14 @@ foreach subpath:subdirs endif else enabled_drivers += name + lib_name = '_'.join(['rte', class, name]) + dpdk_conf.set(lib_name.to_upper(), 1) if fmt_name == '' fmt_name = name endif - dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) + + dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro # for driver compatibility, since we changed the # default to match that of make. Remove in future release # after following deprecation process @@ -133,7 +133,6 @@ foreach subpath:subdirs dpdk_conf.set(alt_flag_fmt.format( fmt_name.to_upper()), 1) endif - lib_name = driver_name_fmt.format(fmt_name) dpdk_extra_ldflags += pkgconfig_extra_libs diff --git a/drivers/net/meson.build b/drivers/net/meson.build index d56b24051..4e4c2c976 100644 --- a/drivers/net/meson.build +++ b/drivers/net/meson.build @@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std std_deps += ['bus_vdev'] # same with vdev bus config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/net/mlx4/meson.build b/drivers/net/mlx4/meson.build index 5a25e11a7..404006515 100644 --- a/drivers/net/mlx4/meson.build +++ b/drivers/net/mlx4/meson.build @@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config) # Build Glue Library if dlopen_ibverbs dlopen_name = 'mlx4_glue' - dlopen_lib_name = driver_name_fmt.format(dlopen_name) + dlopen_lib_name = 'rte_net_' + dlopen_name dlopen_so_version = LIB_GLUE_VERSION dlopen_sources = files('mlx4_glue.c') dlopen_install_dir = [ eal_pmd_path + '-glue' ] diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build index da454b194..027ff8056 100644 --- a/drivers/raw/ifpga/meson.build +++ b/drivers/raw/ifpga/meson.build @@ -11,7 +11,7 @@ subdir('base') objs = [base_objs] deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs', - 'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke'] + 'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke'] sources = files('ifpga_rawdev.c') diff --git a/drivers/raw/meson.build b/drivers/raw/meson.build index 2c1e65ec7..d8d6cf582 100644 --- a/drivers/raw/meson.build +++ b/drivers/raw/meson.build @@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma', 'skeleton'] std_deps = ['rawdev'] config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' -driver_name_fmt = 'rte_rawdev_@0@' diff --git a/drivers/regex/meson.build b/drivers/regex/meson.build index 79bb5d5df..880a1b4a3 100644 --- a/drivers/regex/meson.build +++ b/drivers/regex/meson.build @@ -4,4 +4,3 @@ drivers = ['mlx5', 'octeontx2'] std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/drivers/vdpa/meson.build b/drivers/vdpa/meson.build index 798eb3830..b346e4308 100644 --- a/drivers/vdpa/meson.build +++ b/drivers/vdpa/meson.build @@ -10,4 +10,3 @@ drivers = ['ifc', std_deps = ['bus_pci', 'kvargs'] std_deps += ['vhost'] config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' -driver_name_fmt = 'rte_pmd_@0@' diff --git a/examples/bond/meson.build b/examples/bond/meson.build index 82e355a49..69382ffcd 100644 --- a/examples/bond/meson.build +++ b/examples/bond/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -deps += 'pmd_bond' +deps += 'net_bond' allow_experimental_apis = true sources = files( 'main.c' diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index bc7a35514..fdfdd1971 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += 'pmd_ixgbe' + deps += 'net_ixgbe' endif allow_experimental_apis = true diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f72cf70e7..f1a045a0a 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -9,7 +9,7 @@ allow_experimental_apis = true build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') -deps += ['rawdev_ioat'] +deps += ['raw_ioat'] sources = files( 'ioatfwd.c' diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 39e1604fa..9002d62a6 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -8,7 +8,7 @@ deps += 'cryptodev' if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') - deps += 'pmd_crypto_scheduler' + deps += 'crypto_scheduler' endif allow_experimental_apis = true sources = files( diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index 45a59350c..bac6e5cd2 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -16,5 +16,5 @@ sources = files( 'ntb_fwd.c' ) if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') - deps += 'rawdev_ntb' + deps += 'raw_ntb' endif diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 54e2b584f..2dd132015 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -14,15 +14,15 @@ endif deps += ['power'] if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') - deps += ['pmd_bnxt'] + deps += ['net_bnxt'] endif if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') - deps += ['pmd_i40e'] + deps += ['net_i40e'] endif if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') - deps += ['pmd_ixgbe'] + deps += ['net_ixgbe'] endif allow_experimental_apis = true diff --git a/lib/librte_ethdev/meson.build b/lib/librte_ethdev/meson.build index 8fc24e8c8..e4b610246 100644 --- a/lib/librte_ethdev/meson.build +++ b/lib/librte_ethdev/meson.build @@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -name = 'ethdev' sources = files('ethdev_private.c', 'ethdev_profile.c', 'ethdev_trace_points.c', diff --git a/lib/librte_graph/meson.build b/lib/librte_graph/meson.build index d5de1e250..d3ec78ca6 100644 --- a/lib/librte_graph/meson.build +++ b/lib/librte_graph/meson.build @@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(C) 2020 Marvell International Ltd. -name = 'graph' - sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c') headers = files('rte_graph.h', 'rte_graph_worker.h') diff --git a/lib/meson.build b/lib/meson.build index a42e34f54..094454ea5 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -99,7 +99,8 @@ foreach l:libraries set_variable(name.underscorify() + '_disable_reason', reason) else enabled_libs += name - dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) + dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro + dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro install_headers(headers) libname = 'rte_' + name -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson @ 2020-10-15 15:32 ` Andrew Rybchenko 2020-10-15 15:35 ` Bruce Richardson 2020-10-18 9:21 ` Xu, Rosen 2 siblings, 0 replies; 82+ messages in thread From: Andrew Rybchenko @ 2020-10-15 15:32 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Nicolas Chautru, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Fiona Trahe, John Griffin, Deepak Kumar Jain, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Fan Zhang, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Rosen Xu, Tianfei zhang, Chas Williams, Min Hu (Connor), Xiaoyun Li, Jingjing Wu, David Hunt, Kiran Kumar K, Nithin Dabilpuram On 10/15/20 6:05 PM, Bruce Richardson wrote: > As discussed on the dpdk-dev mailing list[1], we can make some easy > improvements in standardizing the naming of the various components in DPDK, > and their associated feature-enabled macros. > > Following this patch, each library will have the name in format, > 'librte_<name>.so', and the macro indicating that library is enabled in the > build will have the form 'RTE_LIB_<NAME>'. > > Similarly, for libraries, the equivalent name formats and macros are: > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > device type taken from the relevant driver subdirectory name, i.e. 'net', > 'crypto' etc. > > To avoid too many changes at once for end applications, the old macro names > will still be provided in the build in this release, but will be removed > subsequently. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru> ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson 2020-10-15 15:32 ` Andrew Rybchenko @ 2020-10-15 15:35 ` Bruce Richardson 2020-10-18 9:21 ` Xu, Rosen 2 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:35 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Nicolas Chautru, Declan Doherty, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Fiona Trahe, John Griffin, Deepak Kumar Jain, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Fan Zhang, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Rosen Xu, Tianfei zhang, Chas Williams, Min Hu (Connor), Xiaoyun Li, Jingjing Wu, David Hunt, Andrew Rybchenko, Kiran Kumar K, Nithin Dabilpuram On Thu, Oct 15, 2020 at 04:05:53PM +0100, Bruce Richardson wrote: > As discussed on the dpdk-dev mailing list[1], we can make some easy > improvements in standardizing the naming of the various components in DPDK, > and their associated feature-enabled macros. > > Following this patch, each library will have the name in format, > 'librte_<name>.so', and the macro indicating that library is enabled in the > build will have the form 'RTE_LIB_<NAME>'. > > Similarly, for libraries, the equivalent name formats and macros are: > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the > device type taken from the relevant driver subdirectory name, i.e. 'net', > 'crypto' etc. > > To avoid too many changes at once for end applications, the old macro names > will still be provided in the build in this release, but will be removed > subsequently. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Also adding Luca's ack from v3: Acked-by: Luca Boccassi <bluca@debian.org> ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson 2020-10-15 15:32 ` Andrew Rybchenko 2020-10-15 15:35 ` Bruce Richardson @ 2020-10-18 9:21 ` Xu, Rosen 2 siblings, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 9:21 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Chautru, Nicolas, Doherty, Declan, Lu, Wenzhuo, Xing, Beilei, Iremonger, Bernard, Ray Kinsella, Neil Horman, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko, Trahe, Fiona, Griffin, John, Jain, Deepak K, Ashish Gupta, Anoob Joseph, Ankur Dwivedi, Zhang, Roy Fan, Jay Zhou, Hemant Agrawal, Nipun Gupta, Jerin Jacob, Pavan Nikhilesh, Zhang, Tianfei, Chas Williams, Min Hu (Connor), Li, Xiaoyun, Wu, Jingjing, Hunt, David, Andrew Rybchenko, Kiran Kumar K, Nithin Dabilpuram On 10/15/20 6:05 PM, Bruce Richardson wrote: > As discussed on the dpdk-dev mailing list[1], we can make some easy > improvements in standardizing the naming of the various components in > DPDK, and their associated feature-enabled macros. > > Following this patch, each library will have the name in format, > 'librte_<name>.so', and the macro indicating that library is enabled > in the build will have the form 'RTE_LIB_<NAME>'. > > Similarly, for libraries, the equivalent name formats and macros are: > 'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is > the device type taken from the relevant driver subdirectory name, i.e. > 'net', 'crypto' etc. > > To avoid too many changes at once for end applications, the old macro > names will still be provided in the build in this release, but will be > removed subsequently. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (6 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson @ 2020-10-15 15:05 ` Bruce Richardson 2020-10-15 15:34 ` Andrew Rybchenko ` (2 more replies) 2020-10-19 20:27 ` [dpdk-dev] [PATCH v5 0/8] Rework " Thomas Monjalon 8 siblings, 3 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-15 15:05 UTC (permalink / raw) To: dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Bruce Richardson, Maryam Tahhan, Reshma Pattan, Nicolas Chautru, Declan Doherty, Cristian Dumitrescu, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Yipeng Wang, Sameh Gobriel, Anatoly Burakov, Olivier Matz, Andrew Rybchenko, Honnappa Nagarahalli, Konstantin Ananyev, Vladimir Medvedkin, David Hunt, Hemant Agrawal, Sachin Saxena, Fiona Trahe, Ashish Gupta, Pablo de Lara, Akhil Goyal, John Griffin, Deepak Kumar Jain, Jeff Guo, Haiyue Wang, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Nipun Gupta, Rosen Xu, Tianfei zhang, Xiao Wang, Xiaoyun Li, Jingjing Wu Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Luca Boccassi <bluca@debian.org> --- app/proc-info/main.c | 4 +- app/test-bbdev/meson.build | 4 +- app/test-bbdev/test_bbdev_perf.c | 8 +- app/test-crypto-perf/cperf_ops.c | 6 +- app/test-crypto-perf/cperf_options.h | 6 +- app/test-crypto-perf/cperf_options_parsing.c | 16 +- .../cperf_test_pmd_cyclecount.c | 2 +- app/test-crypto-perf/cperf_test_throughput.c | 2 +- app/test-crypto-perf/main.c | 6 +- app/test-crypto-perf/meson.build | 2 +- app/test-pipeline/main.c | 2 +- app/test-pmd/bpf_cmd.h | 4 +- app/test-pmd/cmdline.c | 190 +++++++++--------- app/test-pmd/config.c | 18 +- app/test-pmd/meson.build | 22 +- app/test-pmd/parameters.c | 30 +-- app/test-pmd/testpmd.c | 38 ++-- app/test-pmd/testpmd.h | 4 +- app/test/meson.build | 22 +- app/test/process.h | 16 +- app/test/test.c | 20 +- app/test/test_cryptodev.c | 26 +-- app/test/test_cryptodev_hash_test_vectors.h | 2 +- app/test/test_eal_flags.c | 4 +- app/test/test_func_reentrancy.c | 24 +-- app/test/test_kni.c | 2 +- app/test/test_mp_secondary.c | 12 +- app/test/test_power.c | 2 +- app/test/test_power_cpufreq.c | 2 +- app/test/test_power_kvm_vm.c | 2 +- app/test/test_table.c | 2 +- app/test/test_table.h | 2 +- app/test/test_table_combined.h | 2 +- app/test/test_table_tables.h | 2 +- config/arm/meson.build | 6 +- drivers/bus/fslmc/portal/dpaa2_hw_dpio.c | 6 +- drivers/compress/qat/qat_comp.h | 2 +- drivers/compress/qat/qat_comp_pmd.h | 2 +- .../crypto/aesni_mb/aesni_mb_pmd_private.h | 2 +- drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +- drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 8 +- drivers/crypto/dpaa_sec/dpaa_sec.c | 24 +-- drivers/crypto/dpaa_sec/dpaa_sec.h | 8 +- drivers/crypto/qat/qat_sym.c | 2 +- drivers/crypto/qat/qat_sym.h | 8 +- drivers/crypto/qat/qat_sym_capabilities.h | 2 +- drivers/crypto/qat/qat_sym_pmd.c | 12 +- drivers/crypto/qat/qat_sym_pmd.h | 2 +- drivers/crypto/qat/qat_sym_session.c | 4 +- drivers/crypto/qat/qat_sym_session.h | 4 +- drivers/net/ixgbe/ixgbe_ethdev.c | 6 +- drivers/net/ixgbe/ixgbe_ethdev.h | 4 +- drivers/net/ixgbe/ixgbe_flow.c | 6 +- drivers/net/ixgbe/ixgbe_rxtx.c | 26 +-- drivers/net/ixgbe/ixgbe_rxtx.h | 6 +- drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c | 6 +- drivers/net/kni/meson.build | 2 +- drivers/net/netvsc/meson.build | 2 +- drivers/net/vhost/meson.build | 2 +- drivers/raw/dpaa2_cmdif/meson.build | 2 +- drivers/raw/dpaa2_qdma/meson.build | 2 +- drivers/raw/ifpga/base/opae_osdep.h | 2 +- drivers/vdpa/ifc/meson.build | 2 +- examples/distributor/meson.build | 2 +- examples/ethtool/lib/rte_ethtool.c | 4 +- examples/ethtool/meson.build | 2 +- examples/ioat/meson.build | 2 +- examples/ip_pipeline/kni.c | 4 +- examples/ip_pipeline/kni.h | 4 +- examples/ip_pipeline/pipeline.c | 14 +- examples/kni/meson.build | 2 +- examples/l2fwd-crypto/main.c | 4 +- examples/l2fwd-crypto/meson.build | 2 +- examples/l3fwd-power/meson.build | 2 +- examples/ntb/meson.build | 2 +- examples/vhost_crypto/meson.build | 2 +- examples/vm_power_manager/channel_monitor.c | 8 +- .../vm_power_manager/guest_cli/meson.build | 2 +- examples/vm_power_manager/main.c | 12 +- examples/vm_power_manager/meson.build | 8 +- lib/librte_eal/linux/eal.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.c | 4 +- lib/librte_metrics/rte_metrics_telemetry.h | 2 +- lib/librte_port/meson.build | 2 +- lib/meson.build | 2 +- 85 files changed, 389 insertions(+), 389 deletions(-) diff --git a/app/proc-info/main.c b/app/proc-info/main.c index b0de39489..353b3921c 100644 --- a/app/proc-info/main.c +++ b/app/proc-info/main.c @@ -30,7 +30,7 @@ #include <rte_string_fns.h> #include <rte_metrics.h> #include <rte_cycles.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif #include <rte_cryptodev.h> @@ -739,7 +739,7 @@ show_port(void) } printf(" - cyrpto context\n"); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY void *p_ctx = rte_eth_dev_get_sec_ctx(i); printf("\t -- security context - %p\n", p_ctx); diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build index 178306b08..a2bd7dca6 100644 --- a/app/test-bbdev/meson.build +++ b/app/test-bbdev/meson.build @@ -6,9 +6,9 @@ sources = files('main.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') deps += ['bbdev', 'bus_vdev'] -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_LTE_FEC') deps += ['baseband_fpga_lte_fec'] endif -if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC') +if dpdk_conf.has('RTE_BASEBAND_FPGA_5GNR_FEC') deps += ['baseband_fpga_5gnr_fec'] endif diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c index 45c0d62ac..2e85eccf9 100644 --- a/app/test-bbdev/test_bbdev_perf.c +++ b/app/test-bbdev/test_bbdev_perf.c @@ -26,7 +26,7 @@ #define MAX_QUEUES RTE_MAX_LCORE #define TEST_REPETITIONS 1000 -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC #include <fpga_lte_fec.h> #define FPGA_LTE_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf") #define FPGA_LTE_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf") @@ -39,7 +39,7 @@ #define FLR_4G_TIMEOUT 610 #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC #include <rte_pmd_fpga_5gnr_fec.h> #define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf") #define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf") @@ -565,7 +565,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, /* Configure fpga lte fec with PF & VF values * if '-i' flag is set and using fpga device */ -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC +#ifdef RTE_BASEBAND_FPGA_LTE_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_LTE_PF_DRIVER_NAME))) { struct fpga_lte_fec_conf conf; @@ -609,7 +609,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info, info->dev_name); } #endif -#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC +#ifdef RTE_BASEBAND_FPGA_5GNR_FEC if ((get_init_device() == true) && (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) { struct fpga_5gnr_fec_conf conf; diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c index 3da835a9c..cc45af7f2 100644 --- a/app/test-crypto-perf/cperf_ops.c +++ b/app/test-crypto-perf/cperf_ops.c @@ -8,7 +8,7 @@ #include "cperf_ops.h" #include "cperf_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int cperf_set_ops_security(struct rte_crypto_op **ops, uint32_t src_buf_offset __rte_unused, @@ -551,7 +551,7 @@ cperf_create_session(struct rte_mempool *sess_mp, struct rte_crypto_sym_xform aead_xform; struct rte_cryptodev_sym_session *sess = NULL; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * security only */ @@ -844,7 +844,7 @@ cperf_get_op_functions(const struct cperf_options *options, op_fns->populate_ops = cperf_set_ops_cipher; return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_PDCP) { op_fns->populate_ops = cperf_set_ops_security; return 0; diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-perf/cperf_options.h index 256fabb07..9664a4b34 100644 --- a/app/test-crypto-perf/cperf_options.h +++ b/app/test-crypto-perf/cperf_options.h @@ -7,7 +7,7 @@ #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -47,7 +47,7 @@ #define CPERF_DIGEST_SZ ("digest-sz") -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define CPERF_PDCP_SN_SZ ("pdcp-sn-sz") #define CPERF_PDCP_DOMAIN ("pdcp-domain") #define CPERF_PDCP_SES_HFN_EN ("pdcp-ses-hfn-en") @@ -123,7 +123,7 @@ struct cperf_options { uint16_t digest_sz; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint16_t pdcp_sn_sz; uint16_t pdcp_ses_hfn_en; enum rte_security_pdcp_domain pdcp_domain; diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c index 8e086f88e..03ed6f594 100644 --- a/app/test-crypto-perf/cperf_options_parsing.c +++ b/app/test-crypto-perf/cperf_options_parsing.c @@ -57,7 +57,7 @@ usage(char *progname) " --pmd-cyclecount-delay-ms N: set delay between enqueue\n" " and dequeue in pmd-cyclecount benchmarking mode\n" " --csv-friendly: enable test result output CSV friendly\n" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY " --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n" " --pdcp-domain DOMAIN: set PDCP domain <control/user>\n" " --pdcp-ses-hfn-en: enable session based fixed HFN\n" @@ -631,7 +631,7 @@ parse_digest_sz(struct cperf_options *opts, const char *arg) return parse_uint16_t(&opts->digest_sz, arg); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int parse_pdcp_sn_sz(struct cperf_options *opts, const char *arg) { @@ -841,7 +841,7 @@ static struct option lgopts[] = { { CPERF_DIGEST_SZ, required_argument, 0, 0 }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, required_argument, 0, 0 }, { CPERF_PDCP_DOMAIN, required_argument, 0, 0 }, { CPERF_PDCP_SES_HFN_EN, no_argument, 0, 0 }, @@ -913,7 +913,7 @@ cperf_options_default(struct cperf_options *opts) opts->digest_sz = 12; opts->pmdcc_delay = 0; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY opts->pdcp_sn_sz = 12; opts->pdcp_domain = RTE_SECURITY_PDCP_MODE_CONTROL; opts->pdcp_ses_hfn_en = 0; @@ -954,7 +954,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts) { CPERF_AEAD_IV_SZ, parse_aead_iv_sz }, { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz }, { CPERF_DIGEST_SZ, parse_digest_sz }, -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY { CPERF_PDCP_SN_SZ, parse_pdcp_sn_sz }, { CPERF_PDCP_DOMAIN, parse_pdcp_domain }, { CPERF_PDCP_SES_HFN_EN, parse_pdcp_ses_hfn_en }, @@ -1061,7 +1061,7 @@ check_cipher_buffer_length(struct cperf_options *options) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int check_docsis_buffer_length(struct cperf_options *options) { @@ -1215,7 +1215,7 @@ cperf_options_check(struct cperf_options *options) return -EINVAL; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (options->op_type == CPERF_DOCSIS) { if (check_docsis_buffer_length(options) < 0) return -EINVAL; @@ -1308,7 +1308,7 @@ cperf_options_dump(struct cperf_options *opts) printf("#\n"); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (opts->op_type == CPERF_DOCSIS) { printf("# docsis header size: %u\n", opts->docsis_hdr_sz); printf("#\n"); diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c index 69f0943d1..4e67d3aeb 100644 --- a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c @@ -63,7 +63,7 @@ cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-perf/cperf_test_throughput.c index 12d9ea4f9..f30f7d5c2 100644 --- a/app/test-crypto-perf/cperf_test_throughput.c +++ b/app/test-crypto-perf/cperf_test_throughput.c @@ -35,7 +35,7 @@ cperf_throughput_test_free(struct cperf_throughput_ctx *ctx) if (!ctx) return; if (ctx->sess) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ctx->options->op_type == CPERF_PDCP || ctx->options->op_type == CPERF_DOCSIS) { struct rte_security_ctx *sec_ctx = diff --git a/app/test-crypto-perf/main.c b/app/test-crypto-perf/main.c index 8f8e580e4..f4f7e31c9 100644 --- a/app/test-crypto-perf/main.c +++ b/app/test-crypto-perf/main.c @@ -9,7 +9,7 @@ #include <rte_random.h> #include <rte_eal.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -170,7 +170,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) for (i = 0; i < enabled_cdev_count && i < RTE_CRYPTO_MAX_DEVS; i++) { cdev_id = enabled_cdevs[i]; -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* * If multi-core scheduler is used, limit the number * of queue pairs to 1, as there is no way to know @@ -238,7 +238,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs) */ if (!strcmp((const char *)opts->device_type, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/app/test-crypto-perf/meson.build b/app/test-crypto-perf/meson.build index e6ddda6f0..558c64878 100644 --- a/app/test-crypto-perf/meson.build +++ b/app/test-crypto-perf/meson.build @@ -12,6 +12,6 @@ sources = files('cperf_ops.c', 'cperf_test_verify.c', 'main.c') deps += ['cryptodev', 'net', 'security'] -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif diff --git a/app/test-pipeline/main.c b/app/test-pipeline/main.c index 7f0d6d3f1..c7be5942f 100644 --- a/app/test-pipeline/main.c +++ b/app/test-pipeline/main.c @@ -126,7 +126,7 @@ app_lcore_main_loop(__rte_unused void *arg) return 0; case e_APP_PIPELINE_ACL: -#ifndef RTE_LIBRTE_ACL +#ifndef RTE_LIB_ACL rte_exit(EXIT_FAILURE, "ACL not present in build\n"); #else app_main_loop_worker_pipeline_acl(); diff --git a/app/test-pmd/bpf_cmd.h b/app/test-pmd/bpf_cmd.h index 5ee4c9f79..66bc70635 100644 --- a/app/test-pmd/bpf_cmd.h +++ b/app/test-pmd/bpf_cmd.h @@ -5,12 +5,12 @@ #ifndef _BPF_CMD_H_ #define _BPF_CMD_H_ -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF /* BPF CLI */ extern cmdline_parse_inst_t cmd_operate_bpf_ld_parse; extern cmdline_parse_inst_t cmd_operate_bpf_unld_parse; -#endif /* RTE_LIBRTE_BPF */ +#endif /* RTE_LIB_BPF */ #endif /* _BPF_CMD_H_ */ diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 273fb1af6..7a35a826d 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -50,20 +50,20 @@ #include <cmdline_parse_etheraddr.h> #include <cmdline_socket.h> #include <cmdline.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #include <rte_eth_bond_8023ad.h> #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA #include <rte_pmd_dpaa.h> #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include "testpmd.h" @@ -612,7 +612,7 @@ static void cmd_help_long_parsed(void *parsed_result, " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -5457,7 +5457,7 @@ cmd_set_bypass_mode_parsed(void *parsed_result, portid_t port_id = res->port_id; int32_t rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->value, "bypass")) @@ -5525,7 +5525,7 @@ cmd_set_bypass_event_parsed(void *parsed_result, struct cmd_set_bypass_event_result *res = parsed_result; portid_t port_id = res->port_id; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; @@ -5630,7 +5630,7 @@ cmd_set_bypass_timeout_parsed(void *parsed_result, { __rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS if (!strcmp(res->value, "1.5")) bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC; else if (!strcmp(res->value, "2")) @@ -5693,7 +5693,7 @@ cmd_show_bypass_config_parsed(void *parsed_result, struct cmd_show_bypass_config_result *res = parsed_result; portid_t port_id = res->port_id; int rc = -EINVAL; -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS uint32_t event_mode; uint32_t bypass_mode; uint32_t timeout = bypass_timeout; @@ -5776,7 +5776,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = { }, }; -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND /* *** SET BONDING MODE *** */ struct cmd_set_bonding_mode_result { cmdline_fixed_string_t set; @@ -6546,7 +6546,7 @@ cmdline_parse_inst_t cmd_set_bonding_agg_mode_policy = { }; -#endif /* RTE_LIBRTE_PMD_BOND */ +#endif /* RTE_NET_BOND */ /* *** SET FORWARDING MODE *** */ struct cmd_set_fwd_mode_result { @@ -8831,12 +8831,12 @@ cmd_set_vf_rxmode_parsed(void *parsed_result, RTE_SET_USED(is_on); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_rxmode(res->port_id, res->vf_id, vf_rxmode, (uint8_t)is_on); @@ -8910,12 +8910,12 @@ static void cmd_vf_mac_addr_parsed(void *parsed_result, if (strcmp(res->what, "add") != 0) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_add_vf_mac_addr(res->port_num, res->vf_num, &res->address); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_mac_addr_add(res->port_num, &res->address, res->vf_num); @@ -8986,17 +8986,17 @@ cmd_vf_rx_vlan_filter_parsed(void *parsed_result, __rte_unused int is_add = (strcmp(res->what, "add") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_filter(res->port_id, res->vlan_id, res->vf_mask, is_add); @@ -9523,7 +9523,7 @@ cmd_global_config_parsed(void *parsed_result, conf.cfg.gre_key_len = res->len; ret = rte_eth_dev_filter_ctrl(res->port_id, RTE_ETH_FILTER_NONE, RTE_ETH_FILTER_SET, &conf); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_gre_key_len(res->port_id, res->len); #endif @@ -10087,7 +10087,7 @@ cmd_queue_region_parsed(void *parsed_result, { struct cmd_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10095,7 +10095,7 @@ cmd_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_SET; region_conf.region_id = res->region_id; @@ -10186,7 +10186,7 @@ cmd_region_flowtype_parsed(void *parsed_result, { struct cmd_region_flowtype_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10194,7 +10194,7 @@ cmd_region_flowtype_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET; @@ -10277,7 +10277,7 @@ cmd_user_priority_region_parsed(void *parsed_result, { struct cmd_user_priority_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10285,7 +10285,7 @@ cmd_user_priority_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET; region_conf.user_priority = res->user_priority_id; @@ -10368,7 +10368,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, { struct cmd_flush_queue_region_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_region_conf region_conf; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10376,7 +10376,7 @@ cmd_flush_queue_region_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(®ion_conf, 0, sizeof(region_conf)); if (strcmp(res->what, "on") == 0) @@ -10450,7 +10450,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, { struct cmd_show_queue_region_info *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_queue_regions rte_pmd_regions; enum rte_pmd_i40e_queue_region_op op_type; #endif @@ -10458,7 +10458,7 @@ cmd_show_queue_region_info_parsed(void *parsed_result, if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E memset(&rte_pmd_regions, 0, sizeof(rte_pmd_regions)); op_type = RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET; @@ -11354,7 +11354,7 @@ cmd_flow_director_filter_parsed(void *parsed_result, } } else { if (!strcmp(res->mode_value, "raw")) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; struct rte_pmd_i40e_pkt_template_conf conf; @@ -13712,17 +13712,17 @@ cmd_set_vf_vlan_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13818,17 +13818,17 @@ cmd_set_vf_mac_anti_spoof_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_anti_spoof(res->port_id, res->vf_id, is_on); @@ -13924,17 +13924,17 @@ cmd_set_vf_vlan_stripq_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_stripq(res->port_id, res->vf_id, is_on); @@ -14028,17 +14028,17 @@ cmd_set_vf_vlan_insert_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_vlan_insert(res->port_id, res->vf_id, res->vlan_id); @@ -14124,19 +14124,19 @@ cmd_set_tx_loopback_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_tx_loopback(res->port_id, is_on); #endif -#if defined RTE_LIBRTE_DPAA_BUS && defined RTE_LIBRTE_DPAA_PMD +#if defined RTE_BUS_DPAA && defined RTE_NET_DPAA if (ret == -ENOTSUP) ret = rte_pmd_dpaa_set_tx_loopback(res->port_id, is_on); #endif @@ -14223,11 +14223,11 @@ cmd_set_all_queues_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_all_queues_drop_en(res->port_id, is_on); #endif @@ -14319,7 +14319,7 @@ cmd_set_vf_split_drop_en_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_split_drop_en(res->port_id, res->vf_id, is_on); #endif @@ -14411,17 +14411,17 @@ cmd_set_vf_mac_addr_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr(res->port_id, res->vf_id, &res->mac_addr); @@ -14538,7 +14538,7 @@ cmd_set_macsec_offload_on_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp); #endif } @@ -14635,7 +14635,7 @@ cmd_set_macsec_offload_off_parsed( return; if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MACSEC_INSERT) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_macsec_disable(port_id); #endif } @@ -14721,7 +14721,7 @@ cmd_set_macsec_sc_parsed( int ret = -ENOTSUP; int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_config_txsc(res->port_id, res->mac.addr_bytes) : @@ -14840,7 +14840,7 @@ cmd_set_macsec_sa_parsed( key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1); } -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = is_tx ? rte_pmd_ixgbe_macsec_select_txsa(res->port_id, res->idx, res->an, res->pn, key) : @@ -14937,7 +14937,7 @@ cmd_set_vf_promisc_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_unicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15027,7 +15027,7 @@ cmd_set_vf_allmulti_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_multicast_promisc(res->port_id, res->vf_id, is_on); #endif @@ -15117,7 +15117,7 @@ cmd_set_vf_broadcast_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_broadcast(res->port_id, res->vf_id, is_on); #endif @@ -15211,7 +15211,7 @@ cmd_set_vf_vlan_tag_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_vlan_tag(res->port_id, res->vf_id, is_on); #endif @@ -15332,7 +15332,7 @@ cmd_vf_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_max_bw(res->port_id, res->vf_id, res->bw); #endif @@ -15432,7 +15432,7 @@ cmd_vf_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_bw_alloc(res->port_id, res->vf_id, tc_num, bw); #endif @@ -15498,7 +15498,7 @@ cmd_tc_min_bw_parsed( if (ret) return; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_tc_bw_alloc(res->port_id, tc_num, bw); #endif @@ -15547,7 +15547,7 @@ cmd_vf_tc_max_bw_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_vf_tc_max_bw(res->port_id, res->vf_id, res->tc_no, res->bw); #endif @@ -16601,7 +16601,7 @@ cmd_strict_link_prio_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_set_tc_strict_prio(res->port_id, res->tc_map); #endif @@ -16685,7 +16685,7 @@ cmd_ddp_add_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16753,7 +16753,7 @@ cmd_ddp_del_parsed( if (!buff) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_process_ddp_package(res->port_id, buff, size, @@ -16808,7 +16808,7 @@ cmd_ddp_info_parsed( uint8_t *pkg; uint32_t pkg_size; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint32_t i, j, n; uint8_t *buff; uint32_t buff_size = 0; @@ -16829,7 +16829,7 @@ cmd_ddp_info_parsed( if (!pkg) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_get_ddp_info(pkg, pkg_size, (uint8_t *)&info, sizeof(info), RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER); @@ -17044,7 +17044,7 @@ cmd_ddp_get_list_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_ddp_get_list_result *res = parsed_result; struct rte_pmd_i40e_profile_list *p_list; struct rte_pmd_i40e_profile_info *p_info; @@ -17054,7 +17054,7 @@ cmd_ddp_get_list_parsed( #endif int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E size = PROFILE_INFO_SIZE * MAX_PROFILE_NUM + 4; p_list = (struct rte_pmd_i40e_profile_list *)malloc(size); if (!p_list) { @@ -17122,7 +17122,7 @@ cmd_cfg_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_cfg_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17134,7 +17134,7 @@ cmd_cfg_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17245,7 +17245,7 @@ cmd_clear_input_set_parsed( __rte_unused struct cmdline *cl, __rte_unused void *data) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct cmd_clear_input_set_result *res = parsed_result; enum rte_pmd_i40e_inset_type inset_type = INSET_NONE; struct rte_pmd_i40e_inset inset; @@ -17257,7 +17257,7 @@ cmd_clear_input_set_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!strcmp(res->inset_type, "hash_inset")) inset_type = INSET_HASH; else if (!strcmp(res->inset_type, "fdir_inset")) @@ -17373,13 +17373,13 @@ cmd_show_vf_stats_parsed( memset(&stats, 0, sizeof(stats)); -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_get_vf_stats(res->port_id, res->vf_id, &stats); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_get_vf_stats(res->port_id, res->vf_id, @@ -17478,12 +17478,12 @@ cmd_clear_vf_stats_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_reset_vf_stats(res->port_id, res->vf_id); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_reset_vf_stats(res->port_id, res->vf_id); @@ -17570,7 +17570,7 @@ cmd_pctype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_reset(res->port_id); #endif @@ -17644,7 +17644,7 @@ cmd_pctype_mapping_get_parsed( { struct cmd_pctype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping[RTE_PMD_I40E_FLOW_TYPE_MAX]; int i, j, first_pctype; @@ -17653,7 +17653,7 @@ cmd_pctype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_flow_type_mapping_get(res->port_id, mapping); #endif @@ -17671,7 +17671,7 @@ cmd_pctype_mapping_get_parsed( return; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E for (i = 0; i < RTE_PMD_I40E_FLOW_TYPE_MAX; i++) { if (mapping[i].pctype != 0ULL) { first_pctype = 1; @@ -17760,7 +17760,7 @@ cmd_pctype_mapping_update_parsed( { struct cmd_pctype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_flow_type_mapping mapping; unsigned int i; unsigned int nb_item; @@ -17770,7 +17770,7 @@ cmd_pctype_mapping_update_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E nb_item = parse_item_list(res->pctype_list, "pctypes", RTE_PMD_I40E_PCTYPE_MAX, pctype_list, 1); mapping.flow_type = res->flow_type; @@ -17858,7 +17858,7 @@ cmd_ptype_mapping_get_parsed( { struct cmd_ptype_mapping_get_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E int max_ptype_num = 256; struct rte_pmd_i40e_ptype_mapping mapping[max_ptype_num]; uint16_t count; @@ -17868,7 +17868,7 @@ cmd_ptype_mapping_get_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_get(res->port_id, mapping, max_ptype_num, @@ -17889,7 +17889,7 @@ cmd_ptype_mapping_get_parsed( printf("programming error: (%s)\n", strerror(-ret)); } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (!ret) { for (i = 0; i < count; i++) printf("%3d\t0x%08x\n", @@ -17967,7 +17967,7 @@ cmd_ptype_mapping_replace_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_replace(res->port_id, res->target, res->mask, @@ -18049,7 +18049,7 @@ cmd_ptype_mapping_reset_parsed( if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_ptype_mapping_reset(res->port_id); #endif @@ -18126,13 +18126,13 @@ cmd_ptype_mapping_update_parsed( { struct cmd_ptype_mapping_update_result *res = parsed_result; int ret = -ENOTSUP; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_pmd_i40e_ptype_mapping mapping; #endif if (port_id_is_invalid(res->port_id, ENABLED_WARN)) return; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E mapping.hw_ptype = res->hw_ptype; mapping.sw_ptype = res->sw_ptype; ret = rte_pmd_i40e_ptype_mapping_update(res->port_id, @@ -19824,7 +19824,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, (cmdline_parse_inst_t *) &cmd_set_bonding_primary, @@ -20071,7 +20071,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_tx_offload_get_configuration, (cmdline_parse_inst_t *)&cmd_config_per_port_tx_offload, (cmdline_parse_inst_t *)&cmd_config_per_queue_tx_offload, -#ifdef RTE_LIBRTE_BPF +#ifdef RTE_LIB_BPF (cmdline_parse_inst_t *)&cmd_operate_bpf_ld_parse, (cmdline_parse_inst_t *)&cmd_operate_bpf_unld_parse, #endif diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 8ccd98956..91235a642 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -39,13 +39,13 @@ #include <rte_cycles.h> #include <rte_flow.h> #include <rte_errno.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif #include <rte_gro.h> @@ -4146,14 +4146,14 @@ get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info, return 0; } -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) { ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info); if (!ret) ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat); } #endif -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (ret == -ENOTSUP) { ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info); if (!ret) @@ -4306,7 +4306,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg) void set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE int diag; if (is_rx) @@ -4361,12 +4361,12 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk) RTE_SET_USED(rate); RTE_SET_USED(q_msk); -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE if (diag == -ENOTSUP) diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (diag == -ENOTSUP) diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate, q_msk); #endif @@ -4662,7 +4662,7 @@ close_file(uint8_t *buf) void port_queue_region_info_display(portid_t port_id, void *buf) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E uint16_t i, j; struct rte_pmd_i40e_queue_regions *info = (struct rte_pmd_i40e_queue_regions *)buf; diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build index 2e8b9f8a9..7e9c7bdd6 100644 --- a/app/test-pmd/meson.build +++ b/app/test-pmd/meson.build @@ -25,37 +25,37 @@ sources = files('5tswap.c', 'util.c') deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci'] -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') deps += 'pdump' endif -if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS') +if dpdk_conf.has('RTE_LIB_BITRATESTATS') deps += 'bitratestats' endif -if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS') +if dpdk_conf.has('RTE_LIB_LATENCYSTATS') deps += 'latencystats' endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') deps += 'net_bond' endif -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += 'net_bnxt' endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += 'net_i40e' endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif -if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD') +if dpdk_conf.has('RTE_NET_DPAA') deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa'] endif -if dpdk_conf.has('RTE_LIBRTE_BPF') +if dpdk_conf.has('RTE_LIB_BPF') sources += files('bpf_cmd.c') deps += 'bpf' endif diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 1ead59579..98e6740e6 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -39,7 +39,7 @@ #include <rte_ether.h> #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_BOND +#ifdef RTE_NET_BOND #include <rte_eth_bond.h> #endif #include <rte_flow.h> @@ -50,7 +50,7 @@ static void usage(char* progname) { printf("usage: %s [EAL options] -- " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "[--interactive|-i] " "[--cmdline-file=FILENAME] " #endif @@ -60,7 +60,7 @@ usage(char* progname) "--portlist=PORTLIST " "--mbuf-size= | --total-num-mbufs= | " "--nb-cores= | --nb-ports= | " -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE "--eth-peers-configfile= | " "--eth-peer=X,M:M:M:M:M:M | " "--tx-ip=SRC,DST | --tx-udp=PORT | " @@ -73,7 +73,7 @@ usage(char* progname) "--vxlan-gpe-port= | --record-core-cycles | " "--record-burst-stats]\n", progname); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --interactive: run in interactive mode.\n"); printf(" --cmdline-file: execute cli commands before startup.\n"); #endif @@ -112,7 +112,7 @@ usage(char* progname) printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n"); printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet " "size to N bytes.\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE printf(" --eth-peers-configfile=name: config file with ethernet addresses " "of peer ports.\n"); printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer " @@ -129,7 +129,7 @@ usage(char* progname) "the packet will be enqueued into the rx drop-queue. " "If the drop-queue doesn't exist, the packet is dropped. " "By default drop-queue=127.\n"); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS printf(" --latencystats=N: enable latency and jitter statistcs " "monitoring on forwarding lcore id N.\n"); #endif @@ -223,7 +223,7 @@ usage(char* progname) printf(" --record-burst-stats: enable display of RX and TX bursts.\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE static int init_peer_eth_addrs(char *config_filename) { @@ -586,7 +586,7 @@ launch_args_parse(int argc, char** argv) static struct option lgopts[] = { { "help", 0, 0, 0 }, -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE { "interactive", 0, 0, 0 }, { "cmdline-file", 1, 0, 0 }, { "auto-start", 0, 0, 0 }, @@ -615,10 +615,10 @@ launch_args_parse(int argc, char** argv) { "pkt-filter-report-hash", 1, 0, 0 }, { "pkt-filter-size", 1, 0, 0 }, { "pkt-filter-drop-queue", 1, 0, 0 }, -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS { "latencystats", 1, 0, 0 }, #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS { "bitrate-stats", 1, 0, 0 }, #endif { "disable-crc-strip", 0, 0, 0 }, @@ -691,7 +691,7 @@ launch_args_parse(int argc, char** argv) argvopt = argv; -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #define SHORTOPTS "i" #else #define SHORTOPTS "" @@ -699,7 +699,7 @@ launch_args_parse(int argc, char** argv) while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah", lgopts, &opt_idx)) != EOF) { switch (opt) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE case 'i': printf("Interactive-mode selected\n"); interactive = 1; @@ -715,7 +715,7 @@ launch_args_parse(int argc, char** argv) usage(argv[0]); rte_exit(EXIT_SUCCESS, "Displayed help\n"); } -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (!strcmp(lgopts[opt_idx].name, "interactive")) { printf("Interactive-mode selected\n"); interactive = 1; @@ -982,7 +982,7 @@ launch_args_parse(int argc, char** argv) "drop queue %d invalid - must" "be >= 0 \n", n); } -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (!strcmp(lgopts[opt_idx].name, "latencystats")) { n = atoi(optarg); @@ -995,7 +995,7 @@ launch_args_parse(int argc, char** argv) " must be >= 0\n", n); } #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) { n = atoi(optarg); if (n >= 0) { diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index ccba71c07..8efe06c64 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -46,18 +46,18 @@ #include <rte_ethdev.h> #include <rte_dev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include <rte_pdump.h> #endif #include <rte_flow.h> #include <rte_metrics.h> -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS #include <rte_bitrate.h> #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS #include <rte_latencystats.h> #endif @@ -404,13 +404,13 @@ int do_mlockall = 0; * NIC bypass mode configuration options. */ -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS /* The NIC bypass watchdog timeout. */ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS /* * Set when latency stats is enabled in the commandline @@ -488,7 +488,7 @@ uint8_t record_burst_stats; unsigned int num_sockets = 0; unsigned int socket_ids[RTE_MAX_NUMA_NODES]; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS /* Bitrate statistics */ struct rte_stats_bitrates *bitrate_data; lcoreid_t bitrate_lcore_id; @@ -2064,7 +2064,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) struct fwd_stream **fsm; streamid_t nb_fs; streamid_t sm_id; -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS uint64_t tics_per_1sec; uint64_t tics_datum; uint64_t tics_current; @@ -2079,7 +2079,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) do { for (sm_id = 0; sm_id < nb_fs; sm_id++) (*pkt_fwd)(fsm[sm_id]); -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0 && bitrate_lcore_id == rte_lcore_id()) { tics_current = rte_rdtsc(); @@ -2092,7 +2092,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) } } #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0 && latencystats_lcore_id == rte_lcore_id()) rte_latencystats_update(); @@ -3347,7 +3347,7 @@ init_port_config(void) return; map_port_queue_stats_mapping_registers(pid, port); -#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS +#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS rte_pmd_ixgbe_bypass_init(pid); #endif @@ -3613,11 +3613,11 @@ signal_handler(int signum) if (signum == SIGINT || signum == SIGTERM) { printf("\nSignal %d received, preparing to exit...\n", signum); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* uninitialize packet capture framework */ rte_pdump_uninit(); #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif @@ -3659,7 +3659,7 @@ main(int argc, char** argv) if (ret != 0) rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP /* initialize packet capture framework */ rte_pdump_init(); #endif @@ -3682,10 +3682,10 @@ main(int argc, char** argv) "Check the core mask argument\n"); /* Bitrate/latency stats disabled by default */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS bitrate_enabled = 0; #endif -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS latencystats_enabled = 0; #endif @@ -3764,7 +3764,7 @@ main(int argc, char** argv) /* Init metrics library */ rte_metrics_init(rte_socket_id()); -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS if (latencystats_enabled != 0) { int ret = rte_latencystats_init(1, NULL); if (ret) @@ -3776,7 +3776,7 @@ main(int argc, char** argv) #endif /* Setup bitrate stats */ -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS if (bitrate_enabled != 0) { bitrate_data = rte_stats_bitrate_create(); if (bitrate_data == NULL) @@ -3786,7 +3786,7 @@ main(int argc, char** argv) } #endif -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE if (strlen(cmdline_filename) != 0) cmdline_read_from_file(cmdline_filename); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 227b69420..e447122d3 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -398,12 +398,12 @@ extern uint32_t param_total_num_mbufs; extern uint16_t stats_period; -#ifdef RTE_LIBRTE_LATENCY_STATS +#ifdef RTE_LIB_LATENCYSTATS extern uint8_t latencystats_enabled; extern lcoreid_t latencystats_lcore_id; #endif -#ifdef RTE_LIBRTE_BITRATESTATS +#ifdef RTE_LIB_BITRATESTATS extern lcoreid_t bitrate_lcore_id; extern uint8_t bitrate_enabled; #endif diff --git a/app/test/meson.build b/app/test/meson.build index c5ce1d2c0..f0e404156 100644 --- a/app/test/meson.build +++ b/app/test/meson.build @@ -338,23 +338,23 @@ dump_test_names = [ # unit tests without requiring that the developer install the # DPDK libraries. Explicit linkage of drivers (plugin libraries) # in applications should not be used. -if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_RING') test_deps += 'mempool_ring' endif -if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL') +if dpdk_conf.has('RTE_MEMPOOL_STACK') test_deps += 'mempool_stack' endif -if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD') +if dpdk_conf.has('RTE_EVENT_SKELETON') test_deps += 'event_skeleton' endif -if dpdk_conf.has('RTE_LIBRTE_TELEMETRY') +if dpdk_conf.has('RTE_LIB_TELEMETRY') test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c'] fast_tests += [['telemetry_json_autotest', true], ['telemetry_data_autotest', true]] endif # The following linkages of drivers are required because # they are used via a driver-specific API. -if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') +if dpdk_conf.has('RTE_NET_BOND') test_deps += 'net_bond' test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c'] driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest'] @@ -363,7 +363,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD') driver_test_names += 'link_bonding_mode4_autotest' endif endif -if dpdk_conf.has('RTE_LIBRTE_RING_PMD') +if dpdk_conf.has('RTE_NET_RING') test_deps += 'net_ring' test_sources += 'test_pmd_ring_perf.c' test_sources += 'test_pmd_ring.c' @@ -380,13 +380,13 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD') fast_tests += [['pdump_autotest', true]] endif -if dpdk_conf.has('RTE_LIBRTE_POWER') +if dpdk_conf.has('RTE_LIB_POWER') test_deps += 'power' endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') test_deps += 'kni' endif -if dpdk_conf.has('RTE_LIBRTE_PDUMP') +if dpdk_conf.has('RTE_LIB_PDUMP') test_deps += 'pdump' endif @@ -403,7 +403,7 @@ cflags += '-fno-strict-aliasing' cflags += ['-DALLOW_INTERNAL_API'] test_dep_objs = [] -if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') +if dpdk_conf.has('RTE_LIB_COMPRESSDEV') compress_test_dep = dependency('zlib', required: false) if compress_test_dep.found() test_dep_objs += compress_test_dep @@ -413,7 +413,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV') endif endif -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') driver_test_names += 'cryptodev_scheduler_autotest' test_deps += 'crypto_scheduler' endif diff --git a/app/test/process.h b/app/test/process.h index c3b378033..27f1b1c0e 100644 --- a/app/test/process.h +++ b/app/test/process.h @@ -24,8 +24,8 @@ #define exe "exe" #endif -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING #include <pthread.h> extern void *send_pkts(void *empty); extern uint16_t flag_for_send_pkts; @@ -45,8 +45,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) char *argv_cpy[numargs + 1]; int i, status; char path[32]; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING pthread_t thread; #endif #endif @@ -124,8 +124,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) } } /* parent process does a wait */ -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) pthread_create(&thread, NULL, &send_pkts, NULL); #endif @@ -133,8 +133,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value) while (wait(&status) != pid) ; -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING if ((strcmp(env_value, "run_pdump_server_tests") == 0)) { flag_for_send_pkts = 0; pthread_join(thread, NULL); diff --git a/app/test/test.c b/app/test/test.c index 94d26ab1f..afabfe42f 100644 --- a/app/test/test.c +++ b/app/test/test.c @@ -12,7 +12,7 @@ #include <ctype.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE #include <cmdline_rdline.h> #include <cmdline_parse.h> #include <cmdline_socket.h> @@ -25,12 +25,12 @@ extern cmdline_parse_ctx_t main_ctx[]; #include <rte_cycles.h> #include <rte_log.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER #include <rte_timer.h> #endif #include "test.h" -#ifdef RTE_LIBRTE_PDUMP +#ifdef RTE_LIB_PDUMP #include "test_pdump.h" #endif @@ -52,8 +52,8 @@ do_recursive_call(void) int (*action_fn)(void); } actions[] = { { "run_secondary_instances", test_mp_secondary }, -#ifdef RTE_LIBRTE_PDUMP -#ifdef RTE_LIBRTE_RING_PMD +#ifdef RTE_LIB_PDUMP +#ifdef RTE_NET_RING { "run_pdump_server_tests", test_pdump }, #endif #endif @@ -69,7 +69,7 @@ do_recursive_call(void) { "test_memory_flags", no_action }, { "test_file_prefix", no_action }, { "test_no_huge_flag", no_action }, -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER { "timer_secondary_spawn_wait", test_timer_secondary }, #endif }; @@ -91,7 +91,7 @@ int last_test_result; int main(int argc, char **argv) { -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE struct cmdline *cl; #endif char *extra_args; @@ -134,7 +134,7 @@ main(int argc, char **argv) goto out; } -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER if (rte_timer_subsystem_init() < 0) { ret = -1; goto out; @@ -163,7 +163,7 @@ main(int argc, char **argv) "HPET is not enabled, using TSC as default timer\n"); -#ifdef RTE_LIBRTE_CMDLINE +#ifdef RTE_LIB_CMDLINE cl = cmdline_stdin_new(main_ctx, "RTE>>"); if (cl == NULL) { ret = -1; @@ -191,7 +191,7 @@ main(int argc, char **argv) ret = 0; out: -#ifdef RTE_LIBRTE_TIMER +#ifdef RTE_LIB_TIMER rte_timer_subsystem_finalize(); #endif rte_eal_cleanup(); diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 153d00119..687a8830a 100644 --- a/app/test/test_cryptodev.c +++ b/app/test/test_cryptodev.c @@ -18,7 +18,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #include <rte_cryptodev_scheduler_operations.h> #endif @@ -40,7 +40,7 @@ #include "test_cryptodev_aead_test_vectors.h" #include "test_cryptodev_hmac_test_vectors.h" #include "test_cryptodev_mixed_test_vectors.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "test_cryptodev_security_pdcp_test_vectors.h" #include "test_cryptodev_security_pdcp_test_func.h" #include "test_cryptodev_security_docsis_test_vectors.h" @@ -74,17 +74,17 @@ struct crypto_unittest_params { struct rte_crypto_sym_xform cipher_xform; struct rte_crypto_sym_xform auth_xform; struct rte_crypto_sym_xform aead_xform; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_docsis_xform docsis_xform; #endif union { struct rte_cryptodev_sym_session *sess; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_session *sec_session; #endif }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_action_type type; #endif struct rte_crypto_op *op; @@ -475,7 +475,7 @@ testsuite_setup(void) } } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER char vdev_args[VDEV_ARGS_SIZE] = {""}; char temp_str[VDEV_ARGS_SIZE] = {"mode=multi-core," "ordering=enable,name=cryptodev_test_scheduler,corelist="}; @@ -522,7 +522,7 @@ testsuite_setup(void) i, RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); } } -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { @@ -695,7 +695,7 @@ ut_teardown(void) struct rte_cryptodev_stats stats; /* free crypto session structure */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ut_params->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) { if (ut_params->sec_session) { rte_security_session_destroy(rte_cryptodev_get_sec_ctx @@ -7085,7 +7085,7 @@ test_authenticated_encryption(const struct aead_test_data *tdata) } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int security_proto_supported(enum rte_security_session_action_type action, enum rte_security_session_protocol proto) @@ -11710,7 +11710,7 @@ test_chacha20_poly1305_decrypt_test_case_rfc8439(void) return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER /* global AESNI slave IDs for the scheduler test */ uint8_t aesni_ids[2]; @@ -11930,7 +11930,7 @@ static struct unit_test_suite cryptodev_scheduler_testsuite = { } }; -#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ +#endif /* RTE_CRYPTO_SCHEDULER */ static struct unit_test_suite cryptodev_testsuite = { .suite_name = "Crypto Unit Test Suite", @@ -12551,7 +12551,7 @@ static struct unit_test_suite cryptodev_testsuite = { TEST_CASE_ST(ut_setup, ut_teardown, test_verify_auth_aes_cmac_cipher_null_test_case_1), -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY TEST_CASE_ST(ut_setup_security, ut_teardown, test_PDCP_PROTO_all), TEST_CASE_ST(ut_setup_security, ut_teardown, @@ -12877,7 +12877,7 @@ test_cryptodev_mrvl(void) return unit_test_suite_runner(&cryptodev_mrvl_testsuite); } -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER static int test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/) diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h index d11d7cee7..e261dfe36 100644 --- a/app/test/test_cryptodev_hash_test_vectors.h +++ b/app/test/test_cryptodev_hash_test_vectors.h @@ -5,7 +5,7 @@ #ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ #define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_ -#ifdef RTE_LIBRTE_PMD_AESNI_MB +#ifdef RTE_CRYPTO_AESNI_MB #include <intel-ipsec-mb.h> #endif diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c index b019656b2..fc7d1a2f0 100644 --- a/app/test/test_eal_flags.c +++ b/app/test/test_eal_flags.c @@ -344,7 +344,7 @@ test_invalid_b_flag(void) static int test_invalid_vdev_flag(void) { -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING #ifdef RTE_EXEC_ENV_FREEBSD /* BSD target doesn't support prefixes at this point, and we also need to * run another primary process here */ @@ -1504,7 +1504,7 @@ test_eal_flags(void) return ret; } -#ifdef RTE_LIBRTE_PMD_RING +#ifdef RTE_NET_RING ret = test_invalid_vdev_flag(); if (ret < 0) { printf("Error in test_invalid_vdev_flag()\n"); diff --git a/app/test/test_func_reentrancy.c b/app/test/test_func_reentrancy.c index f5ddd03d7..2a0c134a9 100644 --- a/app/test/test_func_reentrancy.c +++ b/app/test/test_func_reentrancy.c @@ -27,15 +27,15 @@ #include <rte_spinlock.h> #include <rte_malloc.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> #include <rte_jhash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -200,7 +200,7 @@ mempool_create_lookup(__rte_unused void *arg) return 0; } -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH static void hash_clean(unsigned lcore_id) { @@ -328,9 +328,9 @@ fbk_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM static void lpm_clean(unsigned int lcore_id) { @@ -388,7 +388,7 @@ lpm_create_free(__rte_unused void *arg) return 0; } -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ struct test_case{ case_func_t func; @@ -403,13 +403,13 @@ struct test_case test_cases[] = { { ring_create_lookup, NULL, ring_clean, "ring create/lookup" }, { mempool_create_lookup, NULL, mempool_clean, "mempool create/lookup" }, -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH { hash_create_free, NULL, hash_clean, "hash create/free" }, { fbk_create_free, NULL, fbk_clean, "fbk create/free" }, -#endif /* RTE_LIBRTE_HASH */ -#ifdef RTE_LIBRTE_LPM +#endif /* RTE_LIB_HASH */ +#ifdef RTE_LIB_LPM { lpm_create_free, NULL, lpm_clean, "lpm create/free" }, -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ }; /** diff --git a/app/test/test_kni.c b/app/test/test_kni.c index e47ab36e0..402f17064 100644 --- a/app/test/test_kni.c +++ b/app/test/test_kni.c @@ -11,7 +11,7 @@ #include "test.h" -#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI) +#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI) static int test_kni(void) diff --git a/app/test/test_mp_secondary.c b/app/test/test_mp_secondary.c index 3a655c340..e1a7b4ae4 100644 --- a/app/test/test_mp_secondary.c +++ b/app/test/test_mp_secondary.c @@ -34,14 +34,14 @@ #include <rte_log.h> #include <rte_mempool.h> -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH #include <rte_hash.h> #include <rte_fbk_hash.h> -#endif /* RTE_LIBRTE_HASH */ +#endif /* RTE_LIB_HASH */ -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM #include <rte_lpm.h> -#endif /* RTE_LIBRTE_LPM */ +#endif /* RTE_LIB_LPM */ #include <rte_string_fns.h> @@ -157,7 +157,7 @@ run_object_creation_tests(void) } printf("# Checked rte_mempool_create() OK\n"); -#ifdef RTE_LIBRTE_HASH +#ifdef RTE_LIB_HASH const struct rte_hash_parameters hash_params = { .name = "test_mp_hash" }; rte_errno=0; if ((rte_hash_create(&hash_params) != NULL) && @@ -177,7 +177,7 @@ run_object_creation_tests(void) printf("# Checked rte_fbk_hash_create() OK\n"); #endif -#ifdef RTE_LIBRTE_LPM +#ifdef RTE_LIB_LPM rte_errno=0; struct rte_lpm_config config; diff --git a/app/test/test_power.c b/app/test/test_power.c index 0c597c33f..da1d67c0a 100644 --- a/app/test/test_power.c +++ b/app/test/test_power.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power(void) diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c index d203810da..731c6b4dc 100644 --- a/app/test/test_power_cpufreq.c +++ b/app/test/test_power_cpufreq.c @@ -11,7 +11,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_cpufreq(void) diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c index 785cd048d..cc66b7a8a 100644 --- a/app/test/test_power_kvm_vm.c +++ b/app/test/test_power_kvm_vm.c @@ -10,7 +10,7 @@ #include "test.h" -#ifndef RTE_LIBRTE_POWER +#ifndef RTE_LIB_POWER static int test_power_kvm_vm(void) diff --git a/app/test/test_table.c b/app/test/test_table.c index bc8d8a2e1..95034148c 100644 --- a/app/test/test_table.c +++ b/app/test/test_table.c @@ -180,7 +180,7 @@ test_table(void) } } -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL printf("\n\n\n\n************ACL tests************\n"); if (test_table_acl() < 0) { ret = TEST_FAILED; diff --git a/app/test/test_table.h b/app/test/test_table.h index 43b885587..209bdbff2 100644 --- a/app/test/test_table.h +++ b/app/test/test_table.h @@ -10,7 +10,7 @@ #include <rte_table_array.h> #include <rte_pipeline.h> -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL #include <rte_table_acl.h> #endif diff --git a/app/test/test_table_combined.h b/app/test/test_table_combined.h index d05866240..fb94dbb94 100644 --- a/app/test/test_table_combined.h +++ b/app/test/test_table_combined.h @@ -6,7 +6,7 @@ int test_table_stub_combined(void); int test_table_lpm_combined(void); int test_table_lpm_ipv6_combined(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash8unoptimized(void); diff --git a/app/test/test_table_tables.h b/app/test/test_table_tables.h index 7570e9963..530633a01 100644 --- a/app/test/test_table_tables.h +++ b/app/test/test_table_tables.h @@ -7,7 +7,7 @@ int test_table_hash_cuckoo(void); int test_table_lpm(void); int test_table_lpm_ipv6(void); int test_table_array(void); -#ifdef RTE_LIBRTE_ACL +#ifdef RTE_LIB_ACL int test_table_acl(void); #endif int test_table_hash_unoptimized(void); diff --git a/config/arm/meson.build b/config/arm/meson.build index 344457e8a..b49203fa8 100644 --- a/config/arm/meson.build +++ b/config/arm/meson.build @@ -21,9 +21,9 @@ flags_common_default = [ # ['RTE_ARM64_MEMCPY_ALIGN_MASK', 0xF], # ['RTE_ARM64_MEMCPY_STRICT_ALIGN', false], - ['RTE_LIBRTE_FM10K_PMD', false], - ['RTE_LIBRTE_SFC_EFX_PMD', false], - ['RTE_LIBRTE_AVP_PMD', false], + ['RTE_NET_FM10K', false], + ['RTE_NET_SFC_EFX', false], + ['RTE_NET_AVP', false], ['RTE_SCHED_VECTOR', false], ['RTE_ARM_USE_WFE', false], diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c index b0055b164..1a9dd18b9 100644 --- a/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c +++ b/drivers/bus/fslmc/portal/dpaa2_hw_dpio.c @@ -120,7 +120,7 @@ dpaa2_core_cluster_sdest(int cpu_id) return dpaa2_core_cluster_base + x; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 static void dpaa2_affine_dpio_intr_to_respective_core(int32_t dpio_id, int cpu_id) { @@ -242,7 +242,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) return -1; } -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 if (dpaa2_dpio_intr_init(dpio_dev, cpu_id)) { DPAA2_BUS_ERR("Interrupt registration failed for dpio"); return -1; @@ -255,7 +255,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id) static void dpaa2_put_qbman_swp(struct dpaa2_dpio_dev *dpio_dev) { if (dpio_dev) { -#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV +#ifdef RTE_EVENT_DPAA2 dpaa2_dpio_intr_deinit(dpio_dev); #endif rte_atomic16_clear(&dpio_dev->ref_count); diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h index 1c07f2233..0444b50a1 100644 --- a/drivers/compress/qat/qat_comp.h +++ b/drivers/compress/qat/qat_comp.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_H_ #define _QAT_COMP_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h index ed2712060..252b4b24e 100644 --- a/drivers/compress/qat/qat_comp_pmd.h +++ b/drivers/compress/qat/qat_comp_pmd.h @@ -5,7 +5,7 @@ #ifndef _QAT_COMP_PMD_H_ #define _QAT_COMP_PMD_H_ -#ifdef RTE_LIBRTE_COMPRESSDEV +#ifdef RTE_LIB_COMPRESSDEV #include <rte_compressdev.h> #include <rte_compressdev_pmd.h> diff --git a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h index e0c7b4f7c..8e9b8bca2 100644 --- a/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h +++ b/drivers/crypto/aesni_mb/aesni_mb_pmd_private.h @@ -7,7 +7,7 @@ #include <intel-ipsec-mb.h> -#if defined(RTE_LIBRTE_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) +#if defined(RTE_LIB_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0) #define AESNI_MB_DOCSIS_SEC_ENABLED 1 #include <rte_security.h> #include <rte_security_driver.h> diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c index 109e61ae1..41401c6f0 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -58,7 +58,7 @@ static uint8_t cryptodev_driver_id; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline int build_proto_compound_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, @@ -1355,7 +1355,7 @@ build_sec_fd(struct rte_crypto_op *op, if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) sess = (dpaa2_sec_session *)get_sym_session_private_data( op->sym->session, cryptodev_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) sess = (dpaa2_sec_session *)get_sec_session_private_data( op->sym->sec_session); @@ -1383,7 +1383,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_sg_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: case DPAA2_SEC_PDCP: ret = build_proto_compound_sg_fd(sess, op, fd, bpid); @@ -1407,7 +1407,7 @@ build_sec_fd(struct rte_crypto_op *op, case DPAA2_SEC_CIPHER_HASH: ret = build_authenc_fd(sess, op, fd, bpid); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA2_SEC_IPSEC: ret = build_proto_fd(sess, op, fd, bpid); break; @@ -1522,7 +1522,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, return num_tx; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct rte_crypto_op * sec_simple_fd_to_mbuf(const struct qbman_fd *fd) { @@ -1561,7 +1561,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) struct ctxt_priv *priv; struct rte_mbuf *dst, *src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single) return sec_simple_fd_to_mbuf(fd); #endif @@ -1594,7 +1594,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd) } else dst = src; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { uint16_t len = DPAA2_GET_FD_LEN(fd); dst->pkt_len = len; @@ -2539,7 +2539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev, return ret; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, dpaa2_sec_session *session, @@ -3698,7 +3698,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa2_sec_sym_session_clear, }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa2_sec_capabilities_get(void *device __rte_unused) { @@ -3736,7 +3736,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) struct dpaa2_sec_dev_private *internals; struct rte_device *dev = cryptodev->device; struct rte_dpaa2_device *dpaa2_dev; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct fsl_mc_io *dpseci; @@ -3775,7 +3775,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA2_SEC_DEBUG("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h index 528b64ef8..5d9cf12c4 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h @@ -8,7 +8,7 @@ #ifndef _DPAA2_SEC_PMD_PRIVATE_H_ #define _DPAA2_SEC_PMD_PRIVATE_H_ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -141,7 +141,7 @@ struct dpaa2_sec_aead_ctxt { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* * The structure is to be filled by user for PDCP Protocol */ @@ -193,7 +193,7 @@ typedef struct dpaa2_sec_session_entry { struct dpaa2_sec_aead_ctxt aead_ctxt; } ext_params; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct dpaa2_pdcp_ctxt pdcp; #endif }; @@ -550,7 +550,7 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c index 97002170b..c4d1747a7 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.c +++ b/drivers/crypto/dpaa_sec/dpaa_sec.c @@ -15,7 +15,7 @@ #include <rte_cryptodev_pmd.h> #include <rte_crypto.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif #include <rte_cycles.h> @@ -229,7 +229,7 @@ static inline int is_decode(dpaa_sec_session *ses) return ses->dir == DIR_DEC; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses) { @@ -408,7 +408,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses) memset(cdb, 0, sizeof(struct sec_cdb)); switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_IPSEC: shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses); break; @@ -1539,7 +1539,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses) return cf; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline struct dpaa_sec_job * build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses) { @@ -1714,7 +1714,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, op->sym->session, cryptodev_driver_id); break; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case RTE_CRYPTO_OP_SECURITY_SESSION: ses = (dpaa_sec_session *) get_sec_session_private_data( @@ -1761,7 +1761,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((op->sym->m_dst == NULL) || rte_pktmbuf_is_contiguous(op->sym->m_dst))) { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto(op, ses); @@ -1795,7 +1795,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, } } else { switch (ses->ctxt) { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY case DPAA_SEC_PDCP: case DPAA_SEC_IPSEC: cf = build_proto_sg(op, ses); @@ -1852,7 +1852,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops, ((auth_tail_len << 16) | auth_hdr_len); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* In case of PDCP, per packet HFN is stored in * mbuf priv after sym_op. */ @@ -2467,7 +2467,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev, } } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform, struct rte_security_ipsec_xform *ipsec_xform, @@ -3271,7 +3271,7 @@ static struct rte_cryptodev_ops crypto_ops = { .sym_session_clear = dpaa_sec_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * dpaa_sec_capabilities_get(void *device __rte_unused) { @@ -3310,7 +3310,7 @@ static int dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) { struct dpaa_sec_dev_private *internals; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; #endif struct dpaa_sec_qp *qp; @@ -3347,7 +3347,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev) DPAA_SEC_WARN("Device already init by primary process"); return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ security_instance = rte_malloc("rte_security_instances_ops", sizeof(struct rte_security_ctx), 0); diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h index 2cd50cc8d..45ae53499 100644 --- a/drivers/crypto/dpaa_sec/dpaa_sec.h +++ b/drivers/crypto/dpaa_sec/dpaa_sec.h @@ -98,7 +98,7 @@ struct sec_cdb { uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE]; }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /*! * The structure is to be filled by user as a part of * dpaa_sec_proto_ctxt for PDCP Protocol @@ -125,7 +125,7 @@ typedef struct dpaa_sec_session_entry { enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/ enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/ enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/ #endif union { @@ -168,7 +168,7 @@ typedef struct dpaa_sec_session_entry { uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */ }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct sec_pdcp_ctxt pdcp; #endif }; @@ -568,7 +568,7 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = { { /* SNOW 3G (UIA2) */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c index e3f98a76b..4b7676deb 100644 --- a/drivers/crypto/qat/qat_sym.c +++ b/drivers/crypto/qat/qat_sym.c @@ -180,7 +180,7 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg, } else if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { ctx = (struct qat_sym_session *)get_sym_session_private_data( op->sym->session, qat_sym_driver_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY } else { ctx = (struct qat_sym_session *)get_sec_session_private_data( op->sym->sec_session); diff --git a/drivers/crypto/qat/qat_sym.h b/drivers/crypto/qat/qat_sym.h index 1a9748849..da67a56b3 100644 --- a/drivers/crypto/qat/qat_sym.h +++ b/drivers/crypto/qat/qat_sym.h @@ -6,7 +6,7 @@ #define _QAT_SYM_H_ #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_net_crc.h> #endif @@ -135,7 +135,7 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx, return sym_op->cipher.data.length - last_block_len; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op) { @@ -231,7 +231,7 @@ qat_sym_process_response(void **op, uint8_t *resp) rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; } else { -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t is_docsis_sec = 0; if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) { @@ -256,7 +256,7 @@ qat_sym_process_response(void **op, uint8_t *resp) if (sess->bpi_ctx) { qat_bpicipher_postprocess(sess, rx_op); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (is_docsis_sec) qat_crc_verify(sess, rx_op); #endif diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h index 4ee798992..f7cab2f47 100644 --- a/drivers/crypto/qat/qat_sym_capabilities.h +++ b/drivers/crypto/qat/qat_sym_capabilities.h @@ -731,7 +731,7 @@ }, } \ } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #define QAT_SECURITY_SYM_CAPABILITIES \ { /* AES DOCSIS BPI */ \ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c index 314742f53..a291004cf 100644 --- a/drivers/crypto/qat/qat_sym_pmd.c +++ b/drivers/crypto/qat/qat_sym_pmd.c @@ -8,7 +8,7 @@ #include <rte_malloc.h> #include <rte_pci.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -39,7 +39,7 @@ static const struct rte_cryptodev_capabilities qat_gen3_sym_capabilities[] = { RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_cryptodev_capabilities qat_security_sym_capabilities[] = { QAT_SECURITY_SYM_CAPABILITIES, @@ -261,7 +261,7 @@ static struct rte_cryptodev_ops crypto_qat_ops = { .sym_session_clear = qat_sym_session_clear }; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static const struct rte_security_capability * qat_security_cap_get(void *device __rte_unused) { @@ -385,7 +385,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, "QAT_SYM_CAPA_GEN_%d", qat_pci_dev->qat_dev_gen); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct rte_security_ctx *security_instance; security_instance = rte_malloc("qat_sec", sizeof(struct rte_security_ctx), @@ -462,7 +462,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev, return 0; error: -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif @@ -487,7 +487,7 @@ qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev) /* free crypto device */ cryptodev = rte_cryptodev_pmd_get_dev(qat_pci_dev->sym_dev->sym_dev_id); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(cryptodev->security_ctx); cryptodev->security_ctx = NULL; #endif diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h index f32a77e60..e0992cbe2 100644 --- a/drivers/crypto/qat/qat_sym_pmd.h +++ b/drivers/crypto/qat/qat_sym_pmd.h @@ -9,7 +9,7 @@ #include <rte_ether.h> #include <rte_cryptodev.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c index ed4d00159..23d059bf8 100644 --- a/drivers/crypto/qat/qat_sym_session.c +++ b/drivers/crypto/qat/qat_sym_session.c @@ -14,7 +14,7 @@ #include <rte_log.h> #include <rte_malloc.h> #include <rte_crypto_sym.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -2109,7 +2109,7 @@ int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg) return 0; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static int qat_sec_session_check_docsis(struct rte_security_session_conf *conf) { diff --git a/drivers/crypto/qat/qat_sym_session.h b/drivers/crypto/qat/qat_sym_session.h index 9f1033baf..011e5bb7a 100644 --- a/drivers/crypto/qat/qat_sym_session.h +++ b/drivers/crypto/qat/qat_sym_session.h @@ -6,7 +6,7 @@ #include <rte_crypto.h> #include <rte_cryptodev_pmd.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security.h> #endif @@ -159,7 +159,7 @@ qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg); int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY int qat_security_session_create(void *dev, struct rte_security_session_conf *conf, struct rte_security_session *sess, struct rte_mempool *mempool); diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0b98e210e..7cdb4dfe6 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -33,7 +33,7 @@ #include <rte_random.h> #include <rte_dev.h> #include <rte_hash_crc.h> -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include <rte_security_driver.h> #endif @@ -1151,7 +1151,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) /* Unlock any pending hardware semaphore */ ixgbe_swfw_lock_reset(hw); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* Initialize security_ctx only for primary process*/ if (ixgbe_ipsec_ctx_create(eth_dev)) return -ENOMEM; @@ -3053,7 +3053,7 @@ ixgbe_dev_close(struct rte_eth_dev *dev) /* Remove all Traffic Manager configuration */ ixgbe_tm_conf_uninit(dev); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rte_free(dev->security_ctx); #endif diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 9bdef87fb..33905f713 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -12,7 +12,7 @@ #include "base/ixgbe_dcb_82599.h" #include "base/ixgbe_dcb_82598.h" #include "ixgbe_bypass.h" -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY #include "ixgbe_ipsec.h" #endif #include <rte_flow.h> @@ -494,7 +494,7 @@ struct ixgbe_adapter { struct ixgbe_filter_info filter; struct ixgbe_l2_tn_info l2_tn; struct ixgbe_bw_conf bw_conf; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY struct ixgbe_ipsec ipsec; #endif bool rx_bulk_alloc_allowed; diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index b2a2bfc02..6b3dea46e 100644 --- a/drivers/net/ixgbe/ixgbe_flow.c +++ b/drivers/net/ixgbe/ixgbe_flow.c @@ -215,7 +215,7 @@ cons_parse_ntuple_filter(const struct rte_flow_attr *attr, memset(ð_null, 0, sizeof(struct rte_flow_item_eth)); memset(&vlan_null, 0, sizeof(struct rte_flow_item_vlan)); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /** * Special case for flow action type RTE_FLOW_ACTION_TYPE_SECURITY */ @@ -629,7 +629,7 @@ ixgbe_parse_ntuple_filter(struct rte_eth_dev *dev, if (ret) return ret; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (filter->proto == IPPROTO_ESP) return 0; @@ -3057,7 +3057,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev, ret = ixgbe_parse_ntuple_filter(dev, attr, pattern, actions, &ntuple_filter, error); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* ESP flow not really a flow*/ if (ntuple_filter.proto == IPPROTO_ESP) return flow; diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 29d385c06..cc861187d 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -452,7 +452,7 @@ ixgbe_set_xmit_ctx(struct ixgbe_tx_queue *txq, seqnum_seed |= tx_offload.l2_len << IXGBE_ADVTXD_TUNNEL_LEN; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (ol_flags & PKT_TX_SEC_OFFLOAD) { union ixgbe_crypto_tx_desc_md *md = (union ixgbe_crypto_tx_desc_md *)mdata; @@ -645,7 +645,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint32_t ctx = 0; uint32_t new_ctx; union ixgbe_tx_offload tx_offload; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec; #endif @@ -675,7 +675,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, * are needed for offload functionality. */ ol_flags = tx_pkt->ol_flags; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY use_ipsec = txq->using_ipsec && (ol_flags & PKT_TX_SEC_OFFLOAD); #endif @@ -689,7 +689,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, tx_offload.tso_segsz = tx_pkt->tso_segsz; tx_offload.outer_l2_len = tx_pkt->outer_l2_len; tx_offload.outer_l3_len = tx_pkt->outer_l3_len; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) { union ixgbe_crypto_tx_desc_md *ipsec_mdata = (union ixgbe_crypto_tx_desc_md *) @@ -876,7 +876,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, } olinfo_status |= (pkt_len << IXGBE_ADVTXD_PAYLEN_SHIFT); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (use_ipsec) olinfo_status |= IXGBE_ADVTXD_POPTS_IPSEC; #endif @@ -1460,7 +1460,7 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status) pkt_flags |= PKT_RX_EIP_CKSUM_BAD; } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (rx_status & IXGBE_RXD_STAT_SECP) { pkt_flags |= PKT_RX_SEC_OFFLOAD; if (rx_status & IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG) @@ -2400,7 +2400,7 @@ ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt) { struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue; if (txq->offloads == 0 && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) { @@ -2496,7 +2496,7 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq) { /* Use a simple Tx queue (no offloads, no multi segs) if possible */ if ((txq->offloads == 0) && -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY !(txq->using_ipsec) && #endif (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { @@ -2555,7 +2555,7 @@ ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) tx_offload_capa |= DEV_TX_OFFLOAD_SECURITY; #endif @@ -2723,7 +2723,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, txq->offloads = offloads; txq->ops = &def_txq_ops; txq->tx_deferred_start = tx_conf->tx_deferred_start; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY txq->using_ipsec = !!(dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_SECURITY); #endif @@ -3006,7 +3006,7 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev) hw->mac.type == ixgbe_mac_X550EM_a) offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (dev->security_ctx) offloads |= DEV_RX_OFFLOAD_SECURITY; #endif @@ -4835,7 +4835,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev) struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i]; rxq->rx_using_sse = rx_using_sse; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY rxq->using_ipsec = !!(dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY); #endif @@ -5347,7 +5347,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev) ixgbe_setup_loopback_link_x540_x550(hw, true); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if ((dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SECURITY) || (dev->data->dev_conf.txmode.offloads & diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h index 0b5589ef4..6d2f7c9da 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.h +++ b/drivers/net/ixgbe/ixgbe_rxtx.h @@ -113,7 +113,7 @@ struct ixgbe_rx_queue { uint16_t rx_free_trigger; /**< triggers rx buffer allocation */ uint8_t rx_using_sse; /**< indicates that vector RX is in use */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec RX feature is in use */ #endif @@ -161,7 +161,7 @@ union ixgbe_tx_offload { /* fields for TX offloading of tunnels */ uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */ uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY /* inline ipsec related*/ uint64_t sa_idx:8; /**< TX SA database entry index */ uint64_t sec_pad_len:4; /**< padding length */ @@ -230,7 +230,7 @@ struct ixgbe_tx_queue { struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM]; const struct ixgbe_txq_ops *ops; /**< txq ops */ uint8_t tx_deferred_start; /**< not in global dev start. */ -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t using_ipsec; /**< indicates that IPsec TX feature is in use */ #endif diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c index e77a7f31c..586a26180 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c +++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c @@ -93,7 +93,7 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq) IXGBE_PCI_REG_WC_WRITE(rxq->rdt_reg_addr, rx_id); } -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY static inline void desc_to_olflags_v_ipsec(__m128i descs[4], struct rte_mbuf **rx_pkts) { @@ -318,7 +318,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, volatile union ixgbe_adv_rx_desc *rxdp; struct ixgbe_rx_entry *sw_ring; uint16_t nb_pkts_recd; -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY uint8_t use_ipsec = rxq->using_ipsec; #endif int pos; @@ -484,7 +484,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, /* set ol_flags with vlan packet type */ desc_to_olflags_v(descs, mbuf_init, vlan_flags, &rx_pkts[pos]); -#ifdef RTE_LIBRTE_SECURITY +#ifdef RTE_LIB_SECURITY if (unlikely(use_ipsec)) desc_to_olflags_v_ipsec(descs, &rx_pkts[pos]); #endif diff --git a/drivers/net/kni/meson.build b/drivers/net/kni/meson.build index 0539b4768..d9fa898d1 100644 --- a/drivers/net/kni/meson.build +++ b/drivers/net/kni/meson.build @@ -2,7 +2,7 @@ # Copyright(c) 2018 Intel Corporation # this driver can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') reason = 'missing dependency, DPDK KNI library' sources = files('rte_eth_kni.c') deps += 'kni' diff --git a/drivers/net/netvsc/meson.build b/drivers/net/netvsc/meson.build index e7f449302..f3f52f732 100644 --- a/drivers/net/netvsc/meson.build +++ b/drivers/net/netvsc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Microsoft Corporation -build = dpdk_conf.has('RTE_LIBRTE_VMBUS_BUS') +build = dpdk_conf.has('RTE_BUS_VMBUS') reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') diff --git a/drivers/net/vhost/meson.build b/drivers/net/vhost/meson.build index d7930862a..963b30f20 100644 --- a/drivers/net/vhost/meson.build +++ b/drivers/net/vhost/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('rte_eth_vhost.c') install_headers('rte_eth_vhost.h') diff --git a/drivers/raw/dpaa2_cmdif/meson.build b/drivers/raw/dpaa2_cmdif/meson.build index e7656a3cd..06c0fe756 100644 --- a/drivers/raw/dpaa2_cmdif/meson.build +++ b/drivers/raw/dpaa2_cmdif/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') diff --git a/drivers/raw/dpaa2_qdma/meson.build b/drivers/raw/dpaa2_qdma/meson.build index b9b08153a..3eeab0d1c 100644 --- a/drivers/raw/dpaa2_qdma/meson.build +++ b/drivers/raw/dpaa2_qdma/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2018 NXP -build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL') +build = dpdk_conf.has('RTE_MEMPOOL_DPAA2') reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') diff --git a/drivers/raw/ifpga/base/opae_osdep.h b/drivers/raw/ifpga/base/opae_osdep.h index 416cef01c..18e6a11aa 100644 --- a/drivers/raw/ifpga/base/opae_osdep.h +++ b/drivers/raw/ifpga/base/opae_osdep.h @@ -8,7 +8,7 @@ #include <string.h> #include <stdbool.h> -#ifdef RTE_LIBRTE_EAL +#ifdef RTE_LIB_EAL #include "osdep_rte/osdep_generic.h" #else #include "osdep_raw/osdep_generic.h" diff --git a/drivers/vdpa/ifc/meson.build b/drivers/vdpa/ifc/meson.build index b179987f9..9d256af4b 100644 --- a/drivers/vdpa/ifc/meson.build +++ b/drivers/vdpa/ifc/meson.build @@ -1,7 +1,7 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') reason = 'missing dependency, DPDK vhost library' sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build index 9fec7f883..5244cd4ff 100644 --- a/examples/distributor/meson.build +++ b/examples/distributor/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # require the power library -build = dpdk_conf.has('RTE_LIBRTE_POWER') +build = dpdk_conf.has('RTE_LIB_POWER') allow_experimental_apis = true deps += ['distributor', 'power'] diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c index db8150efd..13f9ba379 100644 --- a/examples/ethtool/lib/rte_ethtool.c +++ b/examples/ethtool/lib/rte_ethtool.c @@ -9,7 +9,7 @@ #include <rte_ethdev.h> #include <rte_ether.h> #include <rte_bus_pci.h> -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif #include "rte_ethtool.h" @@ -395,7 +395,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id) /* Set VF vf_rx_mode, VF unsupport status is discard */ for (vf = 0; vf < num_vfs; vf++) { -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE rte_pmd_ixgbe_set_vf_rxmode(port_id, vf, ETH_VMDQ_ACCEPT_UNTAG, 0); #endif diff --git a/examples/ethtool/meson.build b/examples/ethtool/meson.build index fdfdd1971..cc8edac3d 100644 --- a/examples/ethtool/meson.build +++ b/examples/ethtool/meson.build @@ -13,7 +13,7 @@ sources = files('lib/rte_ethtool.c', includes = include_directories('lib', 'ethtool-app') deps += 'bus_pci' -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += 'net_ixgbe' endif diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build index f1a045a0a..6afbaa680 100644 --- a/examples/ioat/meson.build +++ b/examples/ioat/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' allow_experimental_apis = true -build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV') +build = dpdk_conf.has('RTE_RAW_IOAT') deps += ['raw_ioat'] diff --git a/examples/ip_pipeline/kni.c b/examples/ip_pipeline/kni.c index 451968593..a2d3331cb 100644 --- a/examples/ip_pipeline/kni.c +++ b/examples/ip_pipeline/kni.c @@ -24,7 +24,7 @@ kni_init(void) { TAILQ_INIT(&kni_list); -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI rte_kni_init(KNI_MAX); #endif @@ -46,7 +46,7 @@ kni_find(const char *name) return NULL; } -#ifndef RTE_LIBRTE_KNI +#ifndef RTE_LIB_KNI struct kni * kni_create(const char *name __rte_unused, diff --git a/examples/ip_pipeline/kni.h b/examples/ip_pipeline/kni.h index c3856456d..118f48df7 100644 --- a/examples/ip_pipeline/kni.h +++ b/examples/ip_pipeline/kni.h @@ -8,7 +8,7 @@ #include <stdint.h> #include <sys/queue.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_kni.h> #endif @@ -17,7 +17,7 @@ struct kni { TAILQ_ENTRY(kni) node; char name[NAME_SIZE]; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_kni *k; #endif }; diff --git a/examples/ip_pipeline/pipeline.c b/examples/ip_pipeline/pipeline.c index b627310a0..7ebabcae9 100644 --- a/examples/ip_pipeline/pipeline.c +++ b/examples/ip_pipeline/pipeline.c @@ -11,7 +11,7 @@ #include <rte_string_fns.h> #include <rte_port_ethdev.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include <rte_port_kni.h> #endif #include <rte_port_ring.h> @@ -28,7 +28,7 @@ #include <rte_table_lpm_ipv6.h> #include <rte_table_stub.h> -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI #include "kni.h" #endif #include "link.h" @@ -160,7 +160,7 @@ pipeline_port_in_create(const char *pipeline_name, struct rte_port_ring_reader_params ring; struct rte_port_sched_reader_params sched; struct rte_port_fd_reader_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_reader_params kni; #endif struct rte_port_source_params source; @@ -264,7 +264,7 @@ pipeline_port_in_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_IN_KNI: { struct kni *kni; @@ -404,7 +404,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ring_writer_params ring; struct rte_port_sched_writer_params sched; struct rte_port_fd_writer_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_params kni; #endif struct rte_port_sink_params sink; @@ -415,7 +415,7 @@ pipeline_port_out_create(const char *pipeline_name, struct rte_port_ethdev_writer_nodrop_params ethdev; struct rte_port_ring_writer_nodrop_params ring; struct rte_port_fd_writer_nodrop_params fd; -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI struct rte_port_kni_writer_nodrop_params kni; #endif struct rte_port_sym_crypto_writer_nodrop_params sym_crypto; @@ -537,7 +537,7 @@ pipeline_port_out_create(const char *pipeline_name, break; } -#ifdef RTE_LIBRTE_KNI +#ifdef RTE_LIB_KNI case PORT_OUT_KNI: { struct kni *kni; diff --git a/examples/kni/meson.build b/examples/kni/meson.build index fd6ae4442..58639b139 100644 --- a/examples/kni/meson.build +++ b/examples/kni/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' # this app can be built if-and-only-if KNI library is buildable -build = dpdk_conf.has('RTE_LIBRTE_KNI') +build = dpdk_conf.has('RTE_LIB_KNI') deps += ['kni', 'bus_pci'] sources = files( 'main.c' diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c index 820470db5..8ea2677e5 100644 --- a/examples/l2fwd-crypto/main.c +++ b/examples/l2fwd-crypto/main.c @@ -43,7 +43,7 @@ #include <rte_prefetch.h> #include <rte_random.h> #include <rte_hexdump.h> -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER #include <rte_cryptodev_scheduler.h> #endif @@ -2273,7 +2273,7 @@ initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports, * (one for the header, one for the private data) */ if (!strcmp(dev_info.driver_name, "crypto_scheduler")) { -#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER +#ifdef RTE_CRYPTO_SCHEDULER uint32_t nb_slaves = rte_cryptodev_scheduler_slaves_get(cdev_id, NULL); diff --git a/examples/l2fwd-crypto/meson.build b/examples/l2fwd-crypto/meson.build index 9002d62a6..1813f015b 100644 --- a/examples/l2fwd-crypto/meson.build +++ b/examples/l2fwd-crypto/meson.build @@ -7,7 +7,7 @@ # DPDK instance, use 'make' deps += 'cryptodev' -if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER') +if dpdk_conf.has('RTE_CRYPTO_SCHEDULER') deps += 'crypto_scheduler' endif allow_experimental_apis = true diff --git a/examples/l3fwd-power/meson.build b/examples/l3fwd-power/meson.build index 4cd694710..eb8aef306 100644 --- a/examples/l3fwd-power/meson.build +++ b/examples/l3fwd-power/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build index bac6e5cd2..b0201f68b 100644 --- a/examples/ntb/meson.build +++ b/examples/ntb/meson.build @@ -15,6 +15,6 @@ cflags += ['-D_FILE_OFFSET_BITS=64'] sources = files( 'ntb_fwd.c' ) -if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV') +if dpdk_conf.has('RTE_RAW_NTB') deps += 'raw_ntb' endif diff --git a/examples/vhost_crypto/meson.build b/examples/vhost_crypto/meson.build index 2485f3bd1..b2c125e2f 100644 --- a/examples/vhost_crypto/meson.build +++ b/examples/vhost_crypto/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -build = dpdk_conf.has('RTE_LIBRTE_VHOST') +build = dpdk_conf.has('RTE_LIB_VHOST') allow_experimental_apis = true deps += ['vhost', 'cryptodev'] sources = files( diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c index 1d00a6cf6..228f06803 100644 --- a/examples/vm_power_manager/channel_monitor.c +++ b/examples/vm_power_manager/channel_monitor.c @@ -28,7 +28,7 @@ #include <rte_atomic.h> #include <rte_cycles.h> #include <rte_ethdev.h> -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif #include <rte_power.h> @@ -439,7 +439,7 @@ get_pfid(struct policy *pol) for (i = 0; i < pol->pkt.nb_mac_to_monitor; i++) { RTE_ETH_FOREACH_DEV(x) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E ret = rte_pmd_i40e_query_vfid_by_mac(x, (struct rte_ether_addr *)&(pol->pkt.vfid[i])); #else @@ -538,13 +538,13 @@ get_pkt_diff(struct policy *pol) vsi_pkt_count_prev_total = 0; double rdtsc_curr, rdtsc_diff, diff; int x; -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E struct rte_eth_stats vf_stats; #endif for (x = 0; x < pol->pkt.nb_mac_to_monitor; x++) { -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E /*Read vsi stats*/ if (rte_pmd_i40e_get_vf_stats(x, pol->pfid[x], &vf_stats) == 0) vsi_pkt_count = vf_stats.ipackets; diff --git a/examples/vm_power_manager/guest_cli/meson.build b/examples/vm_power_manager/guest_cli/meson.build index 8c725420d..cd9526601 100644 --- a/examples/vm_power_manager/guest_cli/meson.build +++ b/examples/vm_power_manager/guest_cli/meson.build @@ -6,7 +6,7 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c index 44d2508b1..17b38406f 100644 --- a/examples/vm_power_manager/main.c +++ b/examples/vm_power_manager/main.c @@ -31,13 +31,13 @@ #include "vm_power_cli.h" #include "oob_monitor.h" #include "parse.h" -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE #include <rte_pmd_ixgbe.h> #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E #include <rte_pmd_i40e.h> #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT #include <rte_pmd_bnxt.h> #endif @@ -397,16 +397,16 @@ main(int argc, char **argv) eth.addr_bytes[5] = w + 0xf0; ret = -ENOTSUP; -#ifdef RTE_LIBRTE_IXGBE_PMD +#ifdef RTE_NET_IXGBE ret = rte_pmd_ixgbe_set_vf_mac_addr(portid, w, ð); #endif -#ifdef RTE_LIBRTE_I40E_PMD +#ifdef RTE_NET_I40E if (ret == -ENOTSUP) ret = rte_pmd_i40e_set_vf_mac_addr( portid, w, ð); #endif -#ifdef RTE_LIBRTE_BNXT_PMD +#ifdef RTE_NET_BNXT if (ret == -ENOTSUP) ret = rte_pmd_bnxt_set_vf_mac_addr( portid, w, ð); diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build index 2dd132015..1f813fbe8 100644 --- a/examples/vm_power_manager/meson.build +++ b/examples/vm_power_manager/meson.build @@ -6,22 +6,22 @@ # To build this example as a standalone application with an already-installed # DPDK instance, use 'make' -if not dpdk_conf.has('RTE_LIBRTE_POWER') +if not dpdk_conf.has('RTE_LIB_POWER') build = false subdir_done() endif deps += ['power'] -if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD') +if dpdk_conf.has('RTE_NET_BNXT') deps += ['net_bnxt'] endif -if dpdk_conf.has('RTE_LIBRTE_I40E_PMD') +if dpdk_conf.has('RTE_NET_I40E') deps += ['net_i40e'] endif -if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD') +if dpdk_conf.has('RTE_NET_IXGBE') deps += ['net_ixgbe'] endif diff --git a/lib/librte_eal/linux/eal.c b/lib/librte_eal/linux/eal.c index 9cf0e2ec0..9b579b820 100644 --- a/lib/librte_eal/linux/eal.c +++ b/lib/librte_eal/linux/eal.c @@ -1085,7 +1085,7 @@ rte_eal_init(int argc, char **argv) */ iova_mode = RTE_IOVA_VA; RTE_LOG(DEBUG, EAL, "Physical addresses are unavailable, selecting IOVA as VA mode.\n"); -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0) } else if (rte_eal_check_module("rte_kni") == 1) { iova_mode = RTE_IOVA_PA; RTE_LOG(DEBUG, EAL, "KNI is loaded, selecting IOVA as PA mode for better KNI performance.\n"); @@ -1102,7 +1102,7 @@ rte_eal_init(int argc, char **argv) RTE_LOG(DEBUG, EAL, "IOMMU is not available, selecting IOVA as PA mode.\n"); } } -#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) +#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0) /* Workaround for KNI which requires physical address to work * in kernels < 4.10 */ diff --git a/lib/librte_metrics/rte_metrics_telemetry.c b/lib/librte_metrics/rte_metrics_telemetry.c index 289ebae0b..b97152aeb 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.c +++ b/lib/librte_metrics/rte_metrics_telemetry.c @@ -6,7 +6,7 @@ #include <rte_ethdev.h> #include <rte_string_fns.h> -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <rte_telemetry_legacy.h> #endif @@ -529,7 +529,7 @@ RTE_LOG_REGISTER(metrics_log_level, lib.metrics, ERR); RTE_INIT(metrics_ctor) { -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY rte_telemetry_legacy_register("ports_all_stat_values", DATA_NOT_REQ, handle_ports_all_stats_values); rte_telemetry_legacy_register("global_stat_values", DATA_NOT_REQ, diff --git a/lib/librte_metrics/rte_metrics_telemetry.h b/lib/librte_metrics/rte_metrics_telemetry.h index 6c2391c56..3435a5542 100644 --- a/lib/librte_metrics/rte_metrics_telemetry.h +++ b/lib/librte_metrics/rte_metrics_telemetry.h @@ -2,7 +2,7 @@ * Copyright(c) 2020 Intel Corporation */ -#ifdef RTE_LIBRTE_TELEMETRY +#ifdef RTE_LIB_TELEMETRY #include <jansson.h> #else #define json_t void * diff --git a/lib/librte_port/meson.build b/lib/librte_port/meson.build index 9bbae28b7..609624c29 100644 --- a/lib/librte_port/meson.build +++ b/lib/librte_port/meson.build @@ -33,7 +33,7 @@ if dpdk_conf.has('RTE_PORT_PCAP') ext_deps += pcap_dep # dependency provided in config/meson.build endif -if dpdk_conf.has('RTE_LIBRTE_KNI') +if dpdk_conf.has('RTE_LIB_KNI') sources += files('rte_port_kni.c') headers += files('rte_port_kni.h') deps += 'kni' diff --git a/lib/meson.build b/lib/meson.build index 094454ea5..dd55b5cb5 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -74,7 +74,7 @@ foreach l:libraries ext_deps = [] deps = [] # eal is standard dependency once built - if dpdk_conf.has('RTE_LIBRTE_EAL') + if dpdk_conf.has('RTE_LIB_EAL') deps += ['eal'] endif -- 2.25.1 ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson @ 2020-10-15 15:34 ` Andrew Rybchenko 2020-10-18 9:23 ` Xu, Rosen 2020-10-19 19:03 ` Thomas Monjalon 2 siblings, 0 replies; 82+ messages in thread From: Andrew Rybchenko @ 2020-10-15 15:34 UTC (permalink / raw) To: Bruce Richardson, dev Cc: david.marchand, arybchenko, ferruh.yigit, thomas, bluca, Maryam Tahhan, Reshma Pattan, Nicolas Chautru, Declan Doherty, Cristian Dumitrescu, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Yipeng Wang, Sameh Gobriel, Anatoly Burakov, Olivier Matz, Honnappa Nagarahalli, Konstantin Ananyev, Vladimir Medvedkin, David Hunt, Hemant Agrawal, Sachin Saxena, Fiona Trahe, Ashish Gupta, Pablo de Lara, Akhil Goyal, John Griffin, Deepak Kumar Jain, Jeff Guo, Haiyue Wang, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Nipun Gupta, Rosen Xu, Tianfei zhang, Xiao Wang, Xiaoyun Li, Jingjing Wu On 10/15/20 6:05 PM, Bruce Richardson wrote: > Use the newer macros defined by meson in all DPDK source code, to ensure > there are no errors when the old non-standard macros are removed. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru> Many thanks for working on it. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson 2020-10-15 15:34 ` Andrew Rybchenko @ 2020-10-18 9:23 ` Xu, Rosen 2020-10-19 19:03 ` Thomas Monjalon 2 siblings, 0 replies; 82+ messages in thread From: Xu, Rosen @ 2020-10-18 9:23 UTC (permalink / raw) To: Richardson, Bruce, dev Cc: david.marchand, arybchenko, Yigit, Ferruh, thomas, bluca, Tahhan, Maryam, Pattan, Reshma, Chautru, Nicolas, Doherty, Declan, Dumitrescu, Cristian, Lu, Wenzhuo, Xing, Beilei, Iremonger, Bernard, Wang, Yipeng1, Gobriel, Sameh, Burakov, Anatoly, Olivier Matz, Andrew Rybchenko, Honnappa Nagarahalli, Ananyev, Konstantin, Medvedkin, Vladimir, Hunt, David, Hemant Agrawal, Sachin Saxena, Trahe, Fiona, Ashish Gupta, De Lara Guarch, Pablo, Akhil Goyal, Griffin, John, Jain, Deepak K, Guo, Jia, Wang, Haiyue, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Xia, Chenbo, Wang, Zhihong, Nipun Gupta, Zhang, Tianfei, Wang, Xiao W, Li, Xiaoyun, Wu, Jingjing On 10/15/20 6:05 PM, Bruce Richardson wrote: > Use the newer macros defined by meson in all DPDK source code, to > ensure there are no errors when the old non-standard macros are removed. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Rosen Xu <rosen.xu@intel.com> ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson 2020-10-15 15:34 ` Andrew Rybchenko 2020-10-18 9:23 ` Xu, Rosen @ 2020-10-19 19:03 ` Thomas Monjalon 2 siblings, 0 replies; 82+ messages in thread From: Thomas Monjalon @ 2020-10-19 19:03 UTC (permalink / raw) To: Bruce Richardson, akhil.goyal Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca, Bruce Richardson, Maryam Tahhan, Reshma Pattan, Nicolas Chautru, Declan Doherty, Cristian Dumitrescu, Wenzhuo Lu, Beilei Xing, Bernard Iremonger, Yipeng Wang, Sameh Gobriel, Anatoly Burakov, Olivier Matz, Andrew Rybchenko, Honnappa Nagarahalli, Konstantin Ananyev, Vladimir Medvedkin, David Hunt, Hemant Agrawal, Sachin Saxena, Fiona Trahe, Ashish Gupta, Pablo de Lara, Akhil Goyal, John Griffin, Deepak Kumar Jain, Jeff Guo, Haiyue Wang, Stephen Hemminger, K. Y. Srinivasan, Haiyang Zhang, Long Li, Maxime Coquelin, Chenbo Xia, Zhihong Wang, Nipun Gupta, Rosen Xu, Tianfei zhang, Xiao Wang, Xiaoyun Li, Jingjing Wu 15/10/2020 17:05, Bruce Richardson: > Use the newer macros defined by meson in all DPDK source code, to ensure > there are no errors when the old non-standard macros are removed. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> > Acked-by: Luca Boccassi <bluca@debian.org> > --- > 85 files changed, 389 insertions(+), 389 deletions(-) The rebase of this patch after pull of crypto tree is quite difficult. I hope everything is OK. 912 occurences of options starting with RTE_LIBRTE_ are remaining. For consistency, we should rename them in -rc2. ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] Rework build macros 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson ` (7 preceding siblings ...) 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson @ 2020-10-19 20:27 ` Thomas Monjalon 2020-10-20 7:17 ` David Marchand 8 siblings, 1 reply; 82+ messages in thread From: Thomas Monjalon @ 2020-10-19 20:27 UTC (permalink / raw) To: Bruce Richardson; +Cc: dev, david.marchand, arybchenko, ferruh.yigit, bluca 15/10/2020 17:05, Bruce Richardson: > Following on from discussion in RFC v1 and v2 of this set, this version > reworks the automated macros defined by meson to indicate if a > particular library or driver is enabled in the build. However, while it > does so, it also maintains compatibility with previous releases to ease the > transition for any apps using the older macros, which already has to > contend with a change in DPDK build-system and to switch over to picking up > the library names from pkg-config. > > Advantages of this rework: > * Much cleaner having standard macros > * No need for defining the format of macros for each class > * Shorter macros (for the most part) > > Disadvantages: > * Potentially requires application changes > * Inconsistency between the auto-defined macros and the other feature-set > ones. > > Bruce Richardson (8): > app: fix missing dependencies > examples/l2fwd-crypto: fix missing dependency > build: add defines for compatibility with make build > qat: build from common folder > build: remove library name from version map filename > devtools/test-null: load all drivers from directory > build: standardize component names and defines > build: replace use of old build macros Applied, thanks ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] Rework build macros 2020-10-19 20:27 ` [dpdk-dev] [PATCH v5 0/8] Rework " Thomas Monjalon @ 2020-10-20 7:17 ` David Marchand 2020-10-20 8:37 ` Bruce Richardson 0 siblings, 1 reply; 82+ messages in thread From: David Marchand @ 2020-10-20 7:17 UTC (permalink / raw) To: Bruce Richardson Cc: dev, Andrew Rybchenko, Yigit, Ferruh, Luca Boccassi, Thomas Monjalon On Mon, Oct 19, 2020 at 10:27 PM Thomas Monjalon <thomas@monjalon.net> wrote: > > 15/10/2020 17:05, Bruce Richardson: > > Following on from discussion in RFC v1 and v2 of this set, this version > > reworks the automated macros defined by meson to indicate if a > > particular library or driver is enabled in the build. However, while it > > does so, it also maintains compatibility with previous releases to ease the > > transition for any apps using the older macros, which already has to > > contend with a change in DPDK build-system and to switch over to picking up > > the library names from pkg-config. > > > > Advantages of this rework: > > * Much cleaner having standard macros > > * No need for defining the format of macros for each class > > * Shorter macros (for the most part) > > > > Disadvantages: > > * Potentially requires application changes > > * Inconsistency between the auto-defined macros and the other feature-set > > ones. > > > > Bruce Richardson (8): > > app: fix missing dependencies > > examples/l2fwd-crypto: fix missing dependency > > build: add defines for compatibility with make build > > qat: build from common folder > > build: remove library name from version map filename > > devtools/test-null: load all drivers from directory > > build: standardize component names and defines > > build: replace use of old build macros > > Applied, thanks kni compilation is broken, can you have a look? http://mails.dpdk.org/archives/test-report/2020-October/160621.html Thanks. -- David Marchand ^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] Rework build macros 2020-10-20 7:17 ` David Marchand @ 2020-10-20 8:37 ` Bruce Richardson 0 siblings, 0 replies; 82+ messages in thread From: Bruce Richardson @ 2020-10-20 8:37 UTC (permalink / raw) To: David Marchand Cc: dev, Andrew Rybchenko, Yigit, Ferruh, Luca Boccassi, Thomas Monjalon On Tue, Oct 20, 2020 at 09:17:11AM +0200, David Marchand wrote: > On Mon, Oct 19, 2020 at 10:27 PM Thomas Monjalon <thomas@monjalon.net> wrote: > > > > 15/10/2020 17:05, Bruce Richardson: > > > Following on from discussion in RFC v1 and v2 of this set, this version > > > reworks the automated macros defined by meson to indicate if a > > > particular library or driver is enabled in the build. However, while it > > > does so, it also maintains compatibility with previous releases to ease the > > > transition for any apps using the older macros, which already has to > > > contend with a change in DPDK build-system and to switch over to picking up > > > the library names from pkg-config. > > > > > > Advantages of this rework: > > > * Much cleaner having standard macros > > > * No need for defining the format of macros for each class > > > * Shorter macros (for the most part) > > > > > > Disadvantages: > > > * Potentially requires application changes > > > * Inconsistency between the auto-defined macros and the other feature-set > > > ones. > > > > > > Bruce Richardson (8): > > > app: fix missing dependencies > > > examples/l2fwd-crypto: fix missing dependency > > > build: add defines for compatibility with make build > > > qat: build from common folder > > > build: remove library name from version map filename > > > devtools/test-null: load all drivers from directory > > > build: standardize component names and defines > > > build: replace use of old build macros > > > > Applied, thanks > > kni compilation is broken, can you have a look? > http://mails.dpdk.org/archives/test-report/2020-October/160621.html > > Thanks. > Yes, will do so. /Bruce ^ permalink raw reply [flat|nested] 82+ messages in thread
end of thread, other threads:[~2020-10-20 10:01 UTC | newest] Thread overview: 82+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-09-16 16:44 [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 1/5] app: fix missing dependencies Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 2/5] examples/l2fwd-crypto: fix missing dependency Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 3/5] meson: fix compatibility with make build defines Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 4/5] build: add defines for compatibility with make build Bruce Richardson 2020-09-16 16:44 ` [dpdk-dev] [RFC PATCH 5/5] build: replace use of old build macros Bruce Richardson 2020-09-17 17:59 ` [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility Andrew Rybchenko 2020-09-18 8:41 ` Bruce Richardson 2020-09-18 8:59 ` Andrew Rybchenko 2020-09-18 12:19 ` Ferruh Yigit 2020-09-23 12:46 ` Thomas Monjalon 2020-09-30 16:49 ` Richardson, Bruce 2020-09-30 17:31 ` Thomas Monjalon 2020-09-18 15:12 ` David Marchand 2020-09-30 16:12 ` Ferruh Yigit 2020-09-30 16:19 ` Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 0/8] Rework build macros Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 1/8] app: fix missing dependencies Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 3/8] build: add defines for compatibility with make build Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 4/8] qat: build from common folder Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 5/8] build: remove library name from version map filename Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 6/8] build: standardize component names and defines Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 7/8] build: replace use of old build macros Bruce Richardson 2020-10-02 15:58 ` [dpdk-dev] [RFC PATCH v2 8/8] [v21.02] build: remove compatibility build defines Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 0/7] Rework build macros Bruce Richardson 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:12 ` [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build Bruce Richardson 2020-10-15 10:31 ` Luca Boccassi 2020-10-15 11:20 ` Bruce Richardson 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 4/7] qat: build from common folder Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines Bruce Richardson 2020-10-15 10:30 ` Luca Boccassi 2020-10-15 11:18 ` Bruce Richardson 2020-10-15 13:05 ` Luca Boccassi 2020-10-15 14:03 ` Bruce Richardson 2020-10-15 15:32 ` Luca Boccassi 2020-10-15 15:34 ` Bruce Richardson 2020-10-14 14:13 ` [dpdk-dev] [PATCH v3 7/7] build: replace use of old build macros Bruce Richardson 2020-10-15 10:32 ` Luca Boccassi 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 0/8] Rework " Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 1/8] app: fix missing dependencies Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 3/8] build: add defines for compatibility with make build Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 4/8] qat: build from common folder Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 5/8] build: remove library name from version map filename Bruce Richardson 2020-10-18 11:56 ` Xu, Rosen 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 6/8] devtools/test-null: load all drivers from directory Bruce Richardson 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 7/8] build: standardize component names and defines Bruce Richardson 2020-10-18 11:55 ` Xu, Rosen 2020-10-15 11:03 ` [dpdk-dev] [PATCH v4 8/8] build: replace use of old build macros Bruce Richardson 2020-10-18 11:55 ` Xu, Rosen 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 0/8] Rework " Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 1/8] app: fix missing dependencies Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 2/8] examples/l2fwd-crypto: fix missing dependency Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 3/8] build: add defines for compatibility with make build Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 4/8] qat: build from common folder Bruce Richardson 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 5/8] build: remove library name from version map filename Bruce Richardson 2020-10-15 15:28 ` Andrew Rybchenko 2020-10-19 20:04 ` Thomas Monjalon 2020-10-18 9:24 ` Xu, Rosen 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 6/8] devtools/test-null: load all drivers from directory Bruce Richardson 2020-10-19 16:58 ` Thomas Monjalon 2020-10-20 8:37 ` Bruce Richardson 2020-10-20 10:01 ` Thomas Monjalon 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 7/8] build: standardize component names and defines Bruce Richardson 2020-10-15 15:32 ` Andrew Rybchenko 2020-10-15 15:35 ` Bruce Richardson 2020-10-18 9:21 ` Xu, Rosen 2020-10-15 15:05 ` [dpdk-dev] [PATCH v5 8/8] build: replace use of old build macros Bruce Richardson 2020-10-15 15:34 ` Andrew Rybchenko 2020-10-18 9:23 ` Xu, Rosen 2020-10-19 19:03 ` Thomas Monjalon 2020-10-19 20:27 ` [dpdk-dev] [PATCH v5 0/8] Rework " Thomas Monjalon 2020-10-20 7:17 ` David Marchand 2020-10-20 8:37 ` Bruce Richardson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).