[dpdk-dev] [PATCH] doc: update release notes

[dpdk-dev] [PATCH] doc: update release notes

[Bernard Iremonger]

add release note for live migration of a VM with SRIOV VF

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/rel_notes/release_16_07.rst | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index 569f562..350b259 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -179,6 +179,9 @@ New Features
   For information on this feature,  please see the "I40E Poll Mode Driver"
   section of the "Network Interface Controller Drivers" document.
 
+* **Added support for live migration of a VM with SRIOV VF.**
+
+  Live migration of a VM with Virtio and VF PMD's using the bonding PMD.
 
 Resolved Issues
 ---------------
-- 
2.6.3

Re: [dpdk-dev] [PATCH] doc: update release notes

[Thomas Monjalon]

2016-07-01 15:10, Bernard Iremonger:
> add release note for live migration of a VM with SRIOV VF
[...]
> +* **Added support for live migration of a VM with SRIOV VF.**
> +
> +  Live migration of a VM with Virtio and VF PMD's using the bonding PMD.

Is there some new code for this feature?
I am not sure we need to update the release notes for a doc addition.

Re: [dpdk-dev] [PATCH] doc: update release notes

[Iremonger, Bernard]

Hi Thomas,

<snip>

> Subject: Re: [dpdk-dev] [PATCH] doc: update release notes
> 
> 2016-07-01 15:10, Bernard Iremonger:
> > add release note for live migration of a VM with SRIOV VF
> [...]
> > +* **Added support for live migration of a VM with SRIOV VF.**
> > +
> > +  Live migration of a VM with Virtio and VF PMD's using the bonding PMD.
> 
> Is there some new code for this feature?
> I am not sure we need to update the release notes for a doc addition.

The testpmd patches which I submitted and were applied, were made to enable testing of this feature.
This doc patch is to announce that this feature is available now.

Regards,

Bernard.  

Re: [dpdk-dev] [PATCH] doc: update release notes

[Thomas Monjalon]

2016-07-14 13:45, Iremonger, Bernard:
> > 2016-07-01 15:10, Bernard Iremonger:
> > > add release note for live migration of a VM with SRIOV VF
> > [...]
> > > +* **Added support for live migration of a VM with SRIOV VF.**
> > > +
> > > +  Live migration of a VM with Virtio and VF PMD's using the bonding PMD.
> > 
> > Is there some new code for this feature?
> > I am not sure we need to update the release notes for a doc addition.
> 
> The testpmd patches which I submitted and were applied, were made to enable testing of this feature.
> This doc patch is to announce that this feature is available now.

The feature was not available before?

Re: [dpdk-dev] [PATCH] doc: update release notes

[Iremonger, Bernard]

Hi Thomas,

<snip>

> Subject: Re: [dpdk-dev] [PATCH] doc: update release notes
> 
> 2016-07-14 13:45, Iremonger, Bernard:
> > > 2016-07-01 15:10, Bernard Iremonger:
> > > > add release note for live migration of a VM with SRIOV VF
> > > [...]
> > > > +* **Added support for live migration of a VM with SRIOV VF.**
> > > > +
> > > > +  Live migration of a VM with Virtio and VF PMD's using the bonding
> PMD.
> > >
> > > Is there some new code for this feature?
> > > I am not sure we need to update the release notes for a doc addition.
> >
> > The testpmd patches which I submitted and were applied, were made to
> enable testing of this feature.
> > This doc patch is to announce that this feature is available now.
> 
> The feature was not available before?

It has not been announced previously.

Regards,

Bernard.

Re: [dpdk-dev] [PATCH] doc: update release notes

[Thomas Monjalon]

2016-07-01 15:10, Bernard Iremonger:
> add release note for live migration of a VM with SRIOV VF
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>

Applied, thanks

[dpdk-dev] [PATCH] doc: update release notes

[Ajit Khaparde]

Update release notes for 20.05 release with Broadcom PMD improvements:

  * Added support for host based flow table management
  * Added flow counters to extended stats
  * Added PCI function stats to extended stats

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 doc/guides/rel_notes/release_20_05.rst | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
index 1d1819d27..b627c0b7c 100644
--- a/doc/guides/rel_notes/release_20_05.rst
+++ b/doc/guides/rel_notes/release_20_05.rst
@@ -136,6 +136,14 @@ New Features
   by making use of the event device capabilities. The event mode currently supports
   only inline IPsec protocol offload.
 
+* **Updated Broadcom bnxt driver.**
+
+  Updated Broadcom bnxt driver with new features and improvements, including:
+
+  * Added support for host based flow table management
+  * Added flow counters to extended stats
+  * Added PCI function stats to extended stats
+
 
 Removed Items
 -------------
-- 
2.21.1 (Apple Git-122.3)

Re: [dpdk-dev] [PATCH] doc: update release notes

[Ferruh Yigit]

On 4/17/2020 5:35 PM, Ajit Khaparde wrote:
> Update release notes for 20.05 release with Broadcom PMD improvements:
> 
>   * Added support for host based flow table management
>   * Added flow counters to extended stats
>   * Added PCI function stats to extended stats
> 
> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> ---
>  doc/guides/rel_notes/release_20_05.rst | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst
> index 1d1819d27..b627c0b7c 100644
> --- a/doc/guides/rel_notes/release_20_05.rst
> +++ b/doc/guides/rel_notes/release_20_05.rst
> @@ -136,6 +136,14 @@ New Features
>    by making use of the event device capabilities. The event mode currently supports
>    only inline IPsec protocol offload.
>  
> +* **Updated Broadcom bnxt driver.**
> +
> +  Updated Broadcom bnxt driver with new features and improvements, including:
> +
> +  * Added support for host based flow table management
> +  * Added flow counters to extended stats
> +  * Added PCI function stats to extended stats
> +
>  
>  Removed Items
>  -------------
> 

Hi Ajit,

The release notes should updated with the patchset that adds the feature,
instead of as a separate patch, can you please pay attention for next sets.

Also please add the notes in the order that has been described in the comment of
the section.

Applied to dpdk-next-net/master, thanks.

Re: [dpdk-dev] [PATCH] doc: update release notes

[Ajit Khaparde]

On Fri, Apr 17, 2020 at 3:29 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:

> On 4/17/2020 5:35 PM, Ajit Khaparde wrote:
> > Update release notes for 20.05 release with Broadcom PMD improvements:
> >
> >   * Added support for host based flow table management
> >   * Added flow counters to extended stats
> >   * Added PCI function stats to extended stats
> >
> > Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> > ---
> >  doc/guides/rel_notes/release_20_05.rst | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/doc/guides/rel_notes/release_20_05.rst
> b/doc/guides/rel_notes/release_20_05.rst
> > index 1d1819d27..b627c0b7c 100644
> > --- a/doc/guides/rel_notes/release_20_05.rst
> > +++ b/doc/guides/rel_notes/release_20_05.rst
> > @@ -136,6 +136,14 @@ New Features
> >    by making use of the event device capabilities. The event mode
> currently supports
> >    only inline IPsec protocol offload.
> >
> > +* **Updated Broadcom bnxt driver.**
> > +
> > +  Updated Broadcom bnxt driver with new features and improvements,
> including:
> > +
> > +  * Added support for host based flow table management
> > +  * Added flow counters to extended stats
> > +  * Added PCI function stats to extended stats
> > +
> >
> >  Removed Items
> >  -------------
> >
>
> Hi Ajit,
>
> The release notes should updated with the patchset that adds the feature,
> instead of as a separate patch, can you please pay attention for next sets.
>
> Also please add the notes in the order that has been described in the
> comment of
> the section.
>
> Applied to dpdk-next-net/master, thanks.
>
Will do. Thanks Ferruh.

Thanks
Ajit

Re: [dpdk-dev] [PATCH] doc: update release notes

[Thomas Monjalon]

18/04/2020 00:40, Ajit Khaparde:
> On Fri, Apr 17, 2020 at 3:29 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
> > On 4/17/2020 5:35 PM, Ajit Khaparde wrote:
> > > Update release notes for 20.05 release with Broadcom PMD improvements:
> > >
> > The release notes should updated with the patchset that adds the feature,
> > instead of as a separate patch, can you please pay attention for next sets.
> >
> > Also please add the notes in the order that has been described in the
> > comment of
> > the section.
> >
> > Applied to dpdk-next-net/master, thanks.
> >
> Will do. Thanks Ferruh.

I will squash in the appropriate patches,
so we can git blame release notes
to find the code change.
Thanks for double checking release notes for the next features.

[dpdk-dev] [PATCH] doc: update release notes.

[Qi Zhang]

Add updates for runtime queue setup.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 doc/guides/rel_notes/release_18_05.rst | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/doc/guides/rel_notes/release_18_05.rst b/doc/guides/rel_notes/release_18_05.rst
index 718734852..589649121 100644
--- a/doc/guides/rel_notes/release_18_05.rst
+++ b/doc/guides/rel_notes/release_18_05.rst
@@ -183,7 +183,6 @@ New Features
   stats/xstats on shared memory from secondary process, and also pdump packets on
   those virtual devices.
 
-
 API Changes
 -----------
 
@@ -322,6 +321,12 @@ API Changes
   * ``rte_flow_create()`` API count action now requires the ``struct rte_flow_action_count``.
   * ``rte_flow_query()`` API parameter changed from action type to action structure.
 
+* ethdev: runtime queue setup:
+  * ``rte_eth_rx_queue_setup`` and ``rte_eth_rx_queue_setup`` can be called after
+    ``rte_eth_dev_start`` if device support runtime queue setup. Device driver can
+    expose this capability through ``rte_eth_dev_info_get``. A Rx or Tx queue be
+    setup at runtime need to be started explictly by ``rte_eth_dev_rx_queue_start``
+    or ``rte_eth_dev_tx_queue_start``.
 
 ABI Changes
 -----------
-- 
2.13.6

[dpdk-dev] [PATCH] doc: update release notes

[Helin Zhang]

Updated release notes about adding X722 support.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 doc/guides/rel_notes/release_2_2.rst | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/doc/guides/rel_notes/release_2_2.rst b/doc/guides/rel_notes/release_2_2.rst
index 5636aad..5811c2f 100644
--- a/doc/guides/rel_notes/release_2_2.rst
+++ b/doc/guides/rel_notes/release_2_2.rst
@@ -59,6 +59,10 @@ New Features
 
 * **Added flow director support in i40e VF.**
 
+* **Added i40e support of early X722 series.**
+
+  * Add early X722 support for evaluation only, as the hardware is in A0.
+
 * **Added fm10k vector RX/TX.**
 
 * **Added fm10k TSO support for both PF and VF.**
-- 
1.9.3

Re: [dpdk-dev] [PATCH] doc: update release notes

[Thomas Monjalon]

2015-11-12 11:18, Helin Zhang:
> Updated release notes about adding X722 support.
> 
> Signed-off-by: Helin Zhang <helin.zhang@intel.com>

Applied, thanks