* [dpdk-dev] [PATCH] eal: add config option to enable asserts
@ 2017-08-23 14:00 Xueming Li
2017-08-23 14:09 ` Gaëtan Rivet
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Xueming Li @ 2017-08-23 14:00 UTC (permalink / raw)
To: dev; +Cc: Xueming Li
Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
hard to understand literally that assertion is decided by control path
LOG_LEVEL, especially assertion used on data path.
On the other hand, DPDK need an assertion enabling switch w/o impacting
log output level, assuming "--log-level" not specified.
Assertion is an important API to balance DPDK high performance and
robustness. To promote assertion usage, it's valuable to unhide
assertion out of COFNIG_RTE_LOG_LEVEL.
In one word, log is log, assertion is assertion, debug is hot pot :)
Rationale of this patch is to introduce an independant switch of
assertion.
BTW, CONFIG_RTE_LOG_LEVEL is merely a default value of runtime global
log level, not sure the value to keep it in compile time configuration.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
---
config/common_base | 1 +
lib/librte_eal/common/include/rte_debug.h | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/config/common_base b/config/common_base
index 5e97a08b6..ce14b1cac 100644
--- a/config/common_base
+++ b/config/common_base
@@ -93,6 +93,7 @@ CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_ASSERTION=n
CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
index cab6fb4c9..d1104c240 100644
--- a/lib/librte_eal/common/include/rte_debug.h
+++ b/lib/librte_eal/common/include/rte_debug.h
@@ -79,7 +79,7 @@ void rte_dump_registers(void);
#define rte_panic(...) rte_panic_(__func__, __VA_ARGS__, "dummy")
#define rte_panic_(func, format, ...) __rte_panic(func, format "%.0s", __VA_ARGS__)
-#if RTE_LOG_LEVEL >= RTE_LOG_DEBUG
+#ifdef RTE_ASSERTION
#define RTE_ASSERT(exp) RTE_VERIFY(exp)
#else
#define RTE_ASSERT(exp) do {} while (0)
--
2.13.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] eal: add config option to enable asserts
2017-08-23 14:00 [dpdk-dev] [PATCH] eal: add config option to enable asserts Xueming Li
@ 2017-08-23 14:09 ` Gaëtan Rivet
2017-08-23 14:50 ` Wiles, Keith
2017-08-24 8:10 ` [dpdk-dev] [PATCH v2] " Xueming Li
2017-08-24 8:23 ` Xueming Li
2 siblings, 1 reply; 6+ messages in thread
From: Gaëtan Rivet @ 2017-08-23 14:09 UTC (permalink / raw)
To: Xueming Li; +Cc: dev
Hi,
On Wed, Aug 23, 2017 at 10:00:08PM +0800, Xueming Li wrote:
> Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
> RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
> path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
> hard to understand literally that assertion is decided by control path
> LOG_LEVEL, especially assertion used on data path.
>
> On the other hand, DPDK need an assertion enabling switch w/o impacting
> log output level, assuming "--log-level" not specified.
>
> Assertion is an important API to balance DPDK high performance and
> robustness. To promote assertion usage, it's valuable to unhide
> assertion out of COFNIG_RTE_LOG_LEVEL.
>
> In one word, log is log, assertion is assertion, debug is hot pot :)
>
> Rationale of this patch is to introduce an independant switch of
> assertion.
>
> BTW, CONFIG_RTE_LOG_LEVEL is merely a default value of runtime global
> log level, not sure the value to keep it in compile time configuration.
>
I agree.
> Signed-off-by: Xueming Li <xuemingl@mellanox.com>
> ---
> config/common_base | 1 +
> lib/librte_eal/common/include/rte_debug.h | 2 +-
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/config/common_base b/config/common_base
> index 5e97a08b6..ce14b1cac 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -93,6 +93,7 @@ CONFIG_RTE_MAX_NUMA_NODES=8
> CONFIG_RTE_MAX_MEMSEG=256
> CONFIG_RTE_MAX_MEMZONE=2560
> CONFIG_RTE_MAX_TAILQ=32
> +CONFIG_RTE_ASSERTION=n
I'm not sure about the name, but I'm not maintainer.
I'd suggest something like RTE_ASSERT_ENABLE.
> CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
> CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
> CONFIG_RTE_LOG_HISTORY=256
> diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
> index cab6fb4c9..d1104c240 100644
> --- a/lib/librte_eal/common/include/rte_debug.h
> +++ b/lib/librte_eal/common/include/rte_debug.h
> @@ -79,7 +79,7 @@ void rte_dump_registers(void);
> #define rte_panic(...) rte_panic_(__func__, __VA_ARGS__, "dummy")
> #define rte_panic_(func, format, ...) __rte_panic(func, format "%.0s", __VA_ARGS__)
>
> -#if RTE_LOG_LEVEL >= RTE_LOG_DEBUG
> +#ifdef RTE_ASSERTION
> #define RTE_ASSERT(exp) RTE_VERIFY(exp)
> #else
> #define RTE_ASSERT(exp) do {} while (0)
> --
> 2.13.3
>
Regardless of which name is used:
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
--
Gaëtan Rivet
6WIND
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] eal: add config option to enable asserts
2017-08-23 14:09 ` Gaëtan Rivet
@ 2017-08-23 14:50 ` Wiles, Keith
0 siblings, 0 replies; 6+ messages in thread
From: Wiles, Keith @ 2017-08-23 14:50 UTC (permalink / raw)
To: Gaëtan Rivet; +Cc: Xueming Li, dev
> On Aug 23, 2017, at 9:09 AM, Gaëtan Rivet <gaetan.rivet@6wind.com> wrote:
>
> Hi,
>
> On Wed, Aug 23, 2017 at 10:00:08PM +0800, Xueming Li wrote:
>> Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
>> RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
>> path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
>> hard to understand literally that assertion is decided by control path
>> LOG_LEVEL, especially assertion used on data path.
>>
>> On the other hand, DPDK need an assertion enabling switch w/o impacting
>> log output level, assuming "--log-level" not specified.
>>
>> Assertion is an important API to balance DPDK high performance and
>> robustness. To promote assertion usage, it's valuable to unhide
>> assertion out of COFNIG_RTE_LOG_LEVEL.
>>
>> In one word, log is log, assertion is assertion, debug is hot pot :)
>>
>> Rationale of this patch is to introduce an independant switch of
>> assertion.
>>
>> BTW, CONFIG_RTE_LOG_LEVEL is merely a default value of runtime global
>> log level, not sure the value to keep it in compile time configuration.
>>
>
> I agree.
>
>> Signed-off-by: Xueming Li <xuemingl@mellanox.com>
>> ---
>> config/common_base | 1 +
>> lib/librte_eal/common/include/rte_debug.h | 2 +-
>> 2 files changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/config/common_base b/config/common_base
>> index 5e97a08b6..ce14b1cac 100644
>> --- a/config/common_base
>> +++ b/config/common_base
>> @@ -93,6 +93,7 @@ CONFIG_RTE_MAX_NUMA_NODES=8
>> CONFIG_RTE_MAX_MEMSEG=256
>> CONFIG_RTE_MAX_MEMZONE=2560
>> CONFIG_RTE_MAX_TAILQ=32
>> +CONFIG_RTE_ASSERTION=n
>
> I'm not sure about the name, but I'm not maintainer.
> I'd suggest something like RTE_ASSERT_ENABLE.
I believe the define should be readable and state what it does, so I would suggest we use RTE_ASSERT_ENABLE or RTE_ENABLE_ASSERT the last one is more readable from you point of view.
>
>> CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
>> CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
>> CONFIG_RTE_LOG_HISTORY=256
>> diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
>> index cab6fb4c9..d1104c240 100644
>> --- a/lib/librte_eal/common/include/rte_debug.h
>> +++ b/lib/librte_eal/common/include/rte_debug.h
>> @@ -79,7 +79,7 @@ void rte_dump_registers(void);
>> #define rte_panic(...) rte_panic_(__func__, __VA_ARGS__, "dummy")
>> #define rte_panic_(func, format, ...) __rte_panic(func, format "%.0s", __VA_ARGS__)
>>
>> -#if RTE_LOG_LEVEL >= RTE_LOG_DEBUG
>> +#ifdef RTE_ASSERTION
>> #define RTE_ASSERT(exp) RTE_VERIFY(exp)
>> #else
>> #define RTE_ASSERT(exp) do {} while (0)
>> --
>> 2.13.3
>>
>
> Regardless of which name is used:
>
> Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
>
> --
> Gaëtan Rivet
> 6WIND
Regards,
Keith
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] [PATCH v2] eal: add config option to enable asserts
2017-08-23 14:00 [dpdk-dev] [PATCH] eal: add config option to enable asserts Xueming Li
2017-08-23 14:09 ` Gaëtan Rivet
@ 2017-08-24 8:10 ` Xueming Li
2017-08-24 8:23 ` Xueming Li
2 siblings, 0 replies; 6+ messages in thread
From: Xueming Li @ 2017-08-24 8:10 UTC (permalink / raw)
To: Gaetan Rivet, Wiles Keith; +Cc: xuemingl, dev
Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
hard to understand literally that assertion is decided by control path
LOG_LEVEL, especially assertion used on data path.
On the other hand, DPDK need an assertion enabling switch w/o impacting
log output level, assuming "--log-level" not specified.
Assertion is an important API to balance DPDK high performance and
robustness. To promote assertion usage, it's valuable to unhide
assertion out of COFNIG_RTE_LOG_LEVEL.
In one word, log is log, assertion is assertion, debug is hot pot :)
Rationale of this patch is to introduce an dedicate switch of
assertion: RTE_ENABLE_ASSERT
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
v2: Changed macro name from RTE_ASSERTION to RTE_ENABLE_ASSERT
---
config/common_base | 1 +
lib/librte_eal/common/include/rte_debug.h | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/config/common_base b/config/common_base
index 5e97a08b6..2cb445b6d 100644
--- a/config/common_base
+++ b/config/common_base
@@ -93,6 +93,7 @@ CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
index cab6fb4c9..79b67b3ec 100644
--- a/lib/librte_eal/common/include/rte_debug.h
+++ b/lib/librte_eal/common/include/rte_debug.h
@@ -79,7 +79,7 @@ void rte_dump_registers(void);
#define rte_panic(...) rte_panic_(__func__, __VA_ARGS__, "dummy")
#define rte_panic_(func, format, ...) __rte_panic(func, format "%.0s", __VA_ARGS__)
-#if RTE_LOG_LEVEL >= RTE_LOG_DEBUG
+#ifdef RTE_ENABLE_ASSERT
#define RTE_ASSERT(exp) RTE_VERIFY(exp)
#else
#define RTE_ASSERT(exp) do {} while (0)
--
2.13.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] [PATCH v2] eal: add config option to enable asserts
2017-08-23 14:00 [dpdk-dev] [PATCH] eal: add config option to enable asserts Xueming Li
2017-08-23 14:09 ` Gaëtan Rivet
2017-08-24 8:10 ` [dpdk-dev] [PATCH v2] " Xueming Li
@ 2017-08-24 8:23 ` Xueming Li
2017-10-09 21:01 ` Thomas Monjalon
2 siblings, 1 reply; 6+ messages in thread
From: Xueming Li @ 2017-08-24 8:23 UTC (permalink / raw)
To: Gaetan Rivet, Wiles Keith; +Cc: Xueming Li, dev
Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
hard to understand literally that assertion is decided by control path
LOG_LEVEL, especially assertion used on data path.
On the other hand, DPDK need an assertion enabling switch w/o impacting
log output level, assuming "--log-level" not specified.
Assertion is an important API to balance DPDK high performance and
robustness. To promote assertion usage, it's valuable to unhide
assertion out of COFNIG_RTE_LOG_LEVEL.
In one word, log is log, assertion is assertion, debug is hot pot :)
Rationale of this patch is to introduce an dedicate switch of
assertion: RTE_ENABLE_ASSERT
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
v2: Changed macro name from RTE_ASSERTION to RTE_ENABLE_ASSERT
---
config/common_base | 1 +
lib/librte_eal/common/include/rte_debug.h | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/config/common_base b/config/common_base
index 5e97a08b6..2cb445b6d 100644
--- a/config/common_base
+++ b/config/common_base
@@ -93,6 +93,7 @@ CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
diff --git a/lib/librte_eal/common/include/rte_debug.h b/lib/librte_eal/common/include/rte_debug.h
index cab6fb4c9..79b67b3ec 100644
--- a/lib/librte_eal/common/include/rte_debug.h
+++ b/lib/librte_eal/common/include/rte_debug.h
@@ -79,7 +79,7 @@ void rte_dump_registers(void);
#define rte_panic(...) rte_panic_(__func__, __VA_ARGS__, "dummy")
#define rte_panic_(func, format, ...) __rte_panic(func, format "%.0s", __VA_ARGS__)
-#if RTE_LOG_LEVEL >= RTE_LOG_DEBUG
+#ifdef RTE_ENABLE_ASSERT
#define RTE_ASSERT(exp) RTE_VERIFY(exp)
#else
#define RTE_ASSERT(exp) do {} while (0)
--
2.13.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v2] eal: add config option to enable asserts
2017-08-24 8:23 ` Xueming Li
@ 2017-10-09 21:01 ` Thomas Monjalon
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2017-10-09 21:01 UTC (permalink / raw)
To: Xueming Li; +Cc: dev, Gaetan Rivet, Wiles Keith
24/08/2017 10:23, Xueming Li:
> Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
> RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
> path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
> hard to understand literally that assertion is decided by control path
> LOG_LEVEL, especially assertion used on data path.
>
> On the other hand, DPDK need an assertion enabling switch w/o impacting
> log output level, assuming "--log-level" not specified.
>
> Assertion is an important API to balance DPDK high performance and
> robustness. To promote assertion usage, it's valuable to unhide
> assertion out of COFNIG_RTE_LOG_LEVEL.
>
> In one word, log is log, assertion is assertion, debug is hot pot :)
>
> Rationale of this patch is to introduce an dedicate switch of
> assertion: RTE_ENABLE_ASSERT
>
> Signed-off-by: Xueming Li <xuemingl@mellanox.com>
> Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Applied, thanks
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-10-09 21:01 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-23 14:00 [dpdk-dev] [PATCH] eal: add config option to enable asserts Xueming Li
2017-08-23 14:09 ` Gaëtan Rivet
2017-08-23 14:50 ` Wiles, Keith
2017-08-24 8:10 ` [dpdk-dev] [PATCH v2] " Xueming Li
2017-08-24 8:23 ` Xueming Li
2017-10-09 21:01 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).