* [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test
@ 2018-02-06 2:21 Phil Yang
2018-04-25 17:07 ` Thomas Monjalon
2018-04-26 16:06 ` Thomas Monjalon
0 siblings, 2 replies; 4+ messages in thread
From: Phil Yang @ 2018-02-06 2:21 UTC (permalink / raw)
To: dev; +Cc: nd, phil.yang, anatoly.burakov, herbert.guan
Since RTE_MAX_NUMA_NODES is configurable, the existing socket number
could greater than RTE_MAX_NUMA_NODES. Optimize test case to cover this
situation.(i.e RTE_MAX_NUMA_NODES=1)
Fixes: 45f1b6e8680a ('app: add new tests on eal flags')
Signed-off-by: Phil Yang <phil.yang@arm.com>
---
test/test/test_eal_flags.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/test/test/test_eal_flags.c b/test/test/test_eal_flags.c
index 37c42ef..7df0b8f 100644
--- a/test/test/test_eal_flags.c
+++ b/test/test/test_eal_flags.c
@@ -33,7 +33,7 @@
#define memtest "memtest"
#define memtest1 "memtest1"
#define memtest2 "memtest2"
-#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10)
+#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 20)
#define launch_proc(ARGV) process_dup(ARGV, \
sizeof(ARGV)/(sizeof(ARGV[0])), __func__)
@@ -1138,10 +1138,11 @@ test_memory_flags(void)
#ifdef RTE_EXEC_ENV_BSDAPP
int i, num_sockets = 1;
#else
- int i, num_sockets = get_number_of_sockets();
+ int i, num_sockets = RTE_MIN(get_number_of_sockets(),
+ RTE_MAX_NUMA_NODES);
#endif
- if (num_sockets <= 0 || num_sockets > RTE_MAX_NUMA_NODES) {
+ if (num_sockets <= 0) {
printf("Error - cannot get number of sockets!\n");
return -1;
}
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test
2018-02-06 2:21 [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test Phil Yang
@ 2018-04-25 17:07 ` Thomas Monjalon
2018-04-26 2:19 ` Phil Yang
2018-04-26 16:06 ` Thomas Monjalon
1 sibling, 1 reply; 4+ messages in thread
From: Thomas Monjalon @ 2018-04-25 17:07 UTC (permalink / raw)
To: Phil Yang; +Cc: dev, nd, anatoly.burakov, herbert.guan
Hi,
Your patch has been forgotten for months.
Do not hesitate to ping if no reply.
I have a question below.
06/02/2018 03:21, Phil Yang:
> --- a/test/test/test_eal_flags.c
> +++ b/test/test/test_eal_flags.c
> -#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10)
> +#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 20)
Why the above change?
> @@ -1138,10 +1138,11 @@ test_memory_flags(void)
> - int i, num_sockets = get_number_of_sockets();
> + int i, num_sockets = RTE_MIN(get_number_of_sockets(),
> + RTE_MAX_NUMA_NODES);
> #endif
>
> - if (num_sockets <= 0 || num_sockets > RTE_MAX_NUMA_NODES) {
> + if (num_sockets <= 0) {
> printf("Error - cannot get number of sockets!\n");
> return -1;
> }
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test
2018-04-25 17:07 ` Thomas Monjalon
@ 2018-04-26 2:19 ` Phil Yang
0 siblings, 0 replies; 4+ messages in thread
From: Phil Yang @ 2018-04-26 2:19 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, nd, anatoly.burakov, Herbert Guan
Hi Thomas,
That change just want to make sure below two buffers have enough space when configure RTE_MAX_NUMA_NODES=1.
/* construct an invalid socket mask with 2 megs on each socket plus
* extra 2 megs on socket that doesn't exist on current system */
char invalid_socket_mem[SOCKET_MEM_STRLEN];
char buf[SOCKET_MEM_STRLEN];> /* to avoid copying string onto itself */
Thanks,
Phil Yang
> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net>
> Sent: Thursday, April 26, 2018 1:07 AM
> To: Phil Yang <Phil.Yang@arm.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; anatoly.burakov@intel.com; Herbert
> Guan <Herbert.Guan@arm.com>
> Subject: Re: [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test
>
> Hi,
>
> Your patch has been forgotten for months.
> Do not hesitate to ping if no reply.
>
> I have a question below.
>
> 06/02/2018 03:21, Phil Yang:
> > --- a/test/test/test_eal_flags.c
> > +++ b/test/test/test_eal_flags.c
> > -#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10)
> > +#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 20)
>
> Why the above change?
>
> > @@ -1138,10 +1138,11 @@ test_memory_flags(void)
> > - int i, num_sockets = get_number_of_sockets();
> > + int i, num_sockets = RTE_MIN(get_number_of_sockets(),
> > + RTE_MAX_NUMA_NODES);
> > #endif
> >
> > - if (num_sockets <= 0 || num_sockets > RTE_MAX_NUMA_NODES) {
> > + if (num_sockets <= 0) {
> > printf("Error - cannot get number of sockets!\n");
> > return -1;
> > }
> >
>
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test
2018-02-06 2:21 [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test Phil Yang
2018-04-25 17:07 ` Thomas Monjalon
@ 2018-04-26 16:06 ` Thomas Monjalon
1 sibling, 0 replies; 4+ messages in thread
From: Thomas Monjalon @ 2018-04-26 16:06 UTC (permalink / raw)
To: Phil Yang; +Cc: dev, nd, anatoly.burakov, herbert.guan
06/02/2018 03:21, Phil Yang:
> Since RTE_MAX_NUMA_NODES is configurable, the existing socket number
> could greater than RTE_MAX_NUMA_NODES. Optimize test case to cover this
> situation.(i.e RTE_MAX_NUMA_NODES=1)
>
> Fixes: 45f1b6e8680a ('app: add new tests on eal flags')
Cc: stable@dpdk.org
> Signed-off-by: Phil Yang <phil.yang@arm.com>
Applied, thanks
Updated title:
test: fix memory flags test for low NUMA nodes number
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-04-26 16:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-06 2:21 [dpdk-dev] [PATCH] test/eal_flags: Optimize memory flags test Phil Yang
2018-04-25 17:07 ` Thomas Monjalon
2018-04-26 2:19 ` Phil Yang
2018-04-26 16:06 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).