[dpdk-dev] [PATCH v2] pipeline_firewall: Fix for port range filtering

[dpdk-dev] [PATCH v2] pipeline_firewall: Fix for port range filtering

[Shyam Kumar Shrivastav]

Firewall ACL definition need to use same input index for source and
destination ports as these are 16 bits and would fit in one ACL
field of 32 bits. This is required as per librte_acl API. Without this
UDP/TCP source and destination ports filtering (and for that
matter ICMP type/code filtering) does not work.

Signed-off-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
---
 examples/ip_pipeline/pipeline/pipeline_firewall_be.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/ip_pipeline/pipeline/pipeline_firewall_be.c b/examples/ip_pipeline/pipeline/pipeline_firewall_be.c
index b61f303..2980492 100644
--- a/examples/ip_pipeline/pipeline/pipeline_firewall_be.c
+++ b/examples/ip_pipeline/pipeline/pipeline_firewall_be.c
@@ -161,7 +161,7 @@ struct firewall_table_entry {
 		.type = RTE_ACL_FIELD_TYPE_RANGE,
 		.size = sizeof(uint16_t),
 		.field_index = 4,
-		.input_index = 4,
+		.input_index = 3,
 		.offset = sizeof(struct ether_hdr) +
 			sizeof(struct ipv4_hdr) +
 			offsetof(struct tcp_hdr, dst_port),
@@ -221,7 +221,7 @@ struct firewall_table_entry {
 		.type = RTE_ACL_FIELD_TYPE_RANGE,
 		.size = sizeof(uint16_t),
 		.field_index = 4,
-		.input_index = 4,
+		.input_index = 3,
 		.offset = sizeof(struct ether_hdr) +
 			SIZEOF_VLAN_HDR +
 			sizeof(struct ipv4_hdr) +
@@ -282,7 +282,7 @@ struct firewall_table_entry {
 		.type = RTE_ACL_FIELD_TYPE_RANGE,
 		.size = sizeof(uint16_t),
 		.field_index = 4,
-		.input_index = 4,
+		.input_index = 3,
 		.offset = sizeof(struct ether_hdr) +
 			SIZEOF_QINQ_HEADER +
 			sizeof(struct ipv4_hdr) +
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v2] pipeline_firewall: Fix for port range filtering

[Dumitrescu, Cristian]

> -----Original Message-----
> From: Shyam Kumar Shrivastav [mailto:shrivastav.shyam@gmail.com]
> Sent: Wednesday, March 22, 2017 1:36 AM
> To: Dumitrescu, Cristian <cristian.dumitrescu@intel.com>
> Cc: dev@dpdk.org; Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
> Subject: [PATCH v2] pipeline_firewall: Fix for port range filtering
> 
> Firewall ACL definition need to use same input index for source and
> destination ports as these are 16 bits and would fit in one ACL
> field of 32 bits. This is required as per librte_acl API. Without this
> UDP/TCP source and destination ports filtering (and for that
> matter ICMP type/code filtering) does not work.
> 
> Signed-off-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
> ---

Reviewed-by: Jasvinder.Singh@intel.com
Acked-by: Cristian.Dumitrescu@intel.com

Thanks, Shyam, for debugging this!

Re: [dpdk-dev] [PATCH v2] pipeline_firewall: Fix for port range filtering

[Shyam Shrivastav]

> Firewall ACL definition need to use same input index for source and
> > destination ports as these are 16 bits and would fit in one ACL
> > field of 32 bits. This is required as per librte_acl API. Without this
> > UDP/TCP source and destination ports filtering (and for that
> > matter ICMP type/code filtering) does not work.
> >
> > Signed-off-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
> > ---
>
> Reviewed-by: Jasvinder.Singh@intel.com
> Acked-by: Cristian.Dumitrescu@intel.com
>
> Thanks, Shyam, for debugging this!
>

Tested-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>

Re: [dpdk-dev] [PATCH v2] pipeline_firewall: Fix for port range filtering

[Thomas Monjalon]

> > Firewall ACL definition need to use same input index for source and
> > destination ports as these are 16 bits and would fit in one ACL
> > field of 32 bits. This is required as per librte_acl API. Without this
> > UDP/TCP source and destination ports filtering (and for that
> > matter ICMP type/code filtering) does not work.
> > 
> > Signed-off-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
> > ---
> 
> Reviewed-by: Jasvinder.Singh@intel.com
> Acked-by: Cristian.Dumitrescu@intel.com
> 
> Thanks, Shyam, for debugging this!

Applied, thanks