* [PATCH] dumpcap: fix list interfaces
@ 2022-09-25 23:34 Stephen Hemminger
2022-09-29 13:22 ` Pattan, Reshma
2022-10-04 15:25 ` Kaur, Arshdeep
0 siblings, 2 replies; 4+ messages in thread
From: Stephen Hemminger @ 2022-09-25 23:34 UTC (permalink / raw)
To: dev; +Cc: Stephen Hemminger, koncept1, Reshma Pattan
The change to do argument process before EAL init broke
the support of list-interfaces option. Fix by setting flag
and doing list-interfaces later.
Fixes: a8dde09f97df ("app/dumpcap: allow help/version without primary process")
Cc: koncept1@gmail.com
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
app/dumpcap/main.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/app/dumpcap/main.c b/app/dumpcap/main.c
index a6041d4ff495..490a0f050bc8 100644
--- a/app/dumpcap/main.c
+++ b/app/dumpcap/main.c
@@ -63,6 +63,8 @@ static unsigned int ring_size = 2048;
static const char *capture_comment;
static uint32_t snaplen = RTE_MBUF_DEFAULT_BUF_SIZE;
static bool dump_bpf;
+static bool show_interfaces;
+
static struct {
uint64_t duration; /* nanoseconds */
unsigned long packets; /* number of packets in file */
@@ -256,7 +258,7 @@ static void select_interface(const char *arg)
}
/* Display list of possible interfaces that can be used. */
-static void show_interfaces(void)
+static void dump_interfaces(void)
{
char name[RTE_ETH_NAME_MAX_LEN];
uint16_t p;
@@ -266,6 +268,8 @@ static void show_interfaces(void)
continue;
printf("%u. %s\n", p, name);
}
+
+ exit(0);
}
static void compile_filter(void)
@@ -353,8 +357,8 @@ static void parse_opts(int argc, char **argv)
dump_bpf = true;
break;
case 'D':
- show_interfaces();
- exit(0);
+ show_interfaces = true;
+ break;
case 'f':
filter_str = optarg;
break;
@@ -529,9 +533,6 @@ static void dpdk_init(void)
if (rte_eal_init(eal_argc, eal_argv) < 0)
rte_exit(EXIT_FAILURE, "EAL init failed: is primary process running?\n");
-
- if (rte_eth_dev_count_avail() == 0)
- rte_exit(EXIT_FAILURE, "No Ethernet ports found\n");
}
/* Create packet ring shared between callbacks and process */
@@ -789,6 +790,12 @@ int main(int argc, char **argv)
parse_opts(argc, argv);
dpdk_init();
+ if (show_interfaces)
+ dump_interfaces();
+
+ if (rte_eth_dev_count_avail() == 0)
+ rte_exit(EXIT_FAILURE, "No Ethernet ports found\n");
+
if (filter_str)
compile_filter();
--
2.35.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH] dumpcap: fix list interfaces
2022-09-25 23:34 [PATCH] dumpcap: fix list interfaces Stephen Hemminger
@ 2022-09-29 13:22 ` Pattan, Reshma
2022-10-10 0:04 ` Thomas Monjalon
2022-10-04 15:25 ` Kaur, Arshdeep
1 sibling, 1 reply; 4+ messages in thread
From: Pattan, Reshma @ 2022-09-29 13:22 UTC (permalink / raw)
To: Stephen Hemminger, dev; +Cc: koncept1
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Monday, September 26, 2022 12:34 AM
> To: dev@dpdk.org
> Cc: Stephen Hemminger <stephen@networkplumber.org>;
> koncept1@gmail.com; Pattan, Reshma <reshma.pattan@intel.com>
> Subject: [PATCH] dumpcap: fix list interfaces
>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH] dumpcap: fix list interfaces
2022-09-25 23:34 [PATCH] dumpcap: fix list interfaces Stephen Hemminger
2022-09-29 13:22 ` Pattan, Reshma
@ 2022-10-04 15:25 ` Kaur, Arshdeep
1 sibling, 0 replies; 4+ messages in thread
From: Kaur, Arshdeep @ 2022-10-04 15:25 UTC (permalink / raw)
To: Stephen Hemminger
Cc: koncept1, Pattan, Reshma, Chintalapalle, Balaji, Beadle, Michael, dev
Hi Stephen,
I tested the patch. "-D" option is now working properly.
But I am facing an issue in this.
Using "-D" provides me with the interfaces available. For me these are "0000:18:01.0" and "0000:18:09.0":
./dpdk-dumpcap -D --file-prefix wls_1
FlexRAN SDK bblib_lte_ldpc_decoder version #DIRTY#
FlexRAN SDK bblib_lte_ldpc_encoder version #DIRTY#
FlexRAN SDK bblib_lte_LDPC_ratematch version #DIRTY#
FlexRAN SDK bblib_lte_rate_dematching_5gnr version #DIRTY#
FlexRAN SDK bblib_lte_turbo version #DIRTY#
FlexRAN SDK bblib_lte_crc version #DIRTY#
FlexRAN SDK bblib_lte_rate_matching version #DIRTY#
FlexRAN SDK bblib_common version #DIRTY#
FlexRAN SDK bblib_srs_fft_cestimate_5gnr version #DIRTY#
FlexRAN SDK bblib_mldts_process_5gnr version #DIRTY#
EAL: 0000:18:01.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:01.1 cannot be used
EAL: 0000:18:09.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:09.1 cannot be used
EAL: 0000:18:11.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:11.0 cannot be used
EAL: 0000:18:11.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:11.1 cannot be used
EAL: 0000:18:19.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:19.0 cannot be used
EAL: 0000:18:19.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:18:19.1 cannot be used
EAL: 0000:af:01.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:01.0 cannot be used
EAL: 0000:af:01.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:01.1 cannot be used
EAL: 0000:af:09.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:09.0 cannot be used
EAL: 0000:af:09.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:09.1 cannot be used
EAL: 0000:af:11.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:11.0 cannot be used
EAL: 0000:af:11.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:11.1 cannot be used
EAL: 0000:af:19.0 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:19.0 cannot be used
EAL: 0000:af:19.1 cannot find TAILQ entry for PCI device!
EAL: Requested device 0000:af:19.1 cannot be used
0. 0000:18:01.0
1. 0000:18:09.0
But when I use these same interfaces to capture, they are not available:
./dpdk-dumpcap -i 0000:18:01.0 -c 500 -s 9600 -w capture1.pacp --file-prefix wls_1
FlexRAN SDK bblib_lte_ldpc_decoder version #DIRTY#
FlexRAN SDK bblib_lte_ldpc_encoder version #DIRTY#
FlexRAN SDK bblib_lte_LDPC_ratematch version #DIRTY#
FlexRAN SDK bblib_lte_rate_dematching_5gnr version #DIRTY#
FlexRAN SDK bblib_lte_turbo version #DIRTY#
FlexRAN SDK bblib_lte_crc version #DIRTY#
FlexRAN SDK bblib_lte_rate_matching version #DIRTY#
FlexRAN SDK bblib_common version #DIRTY#
FlexRAN SDK bblib_srs_fft_cestimate_5gnr version #DIRTY#
FlexRAN SDK bblib_mldts_process_5gnr version #DIRTY#
EAL: Error - exiting with code: 1
Cause: Specified port_number "0000:18:01.0" is not a valid number
./dpdk-dumpcap -i 0000:18:09.0 -c 500 -s 9600 -w capture2.pacp --file-prefix wls_1
FlexRAN SDK bblib_lte_ldpc_decoder version #DIRTY#
FlexRAN SDK bblib_lte_ldpc_encoder version #DIRTY#
FlexRAN SDK bblib_lte_LDPC_ratematch version #DIRTY#
FlexRAN SDK bblib_lte_rate_dematching_5gnr version #DIRTY#
FlexRAN SDK bblib_lte_turbo version #DIRTY#
FlexRAN SDK bblib_lte_crc version #DIRTY#
FlexRAN SDK bblib_lte_rate_matching version #DIRTY#
FlexRAN SDK bblib_common version #DIRTY#
FlexRAN SDK bblib_srs_fft_cestimate_5gnr version #DIRTY#
FlexRAN SDK bblib_mldts_process_5gnr version #DIRTY#
EAL: Error - exiting with code: 1
Cause: Specified port_number "0000:18:09.0" is not a valid number
According to me, select_interface() has same issue that dump_interfaces() had. So we need to add a flag for this in similar way and handle select_interface() in main after parse_opts, dpdk_init and dump_interfaces.
I tested this changes and it works for me. But I am not sure how it will affect entire dumpcap. Please let me know your thoughts about it.
Thanks and regards,
Arshdeep Kaur
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Monday, September 26, 2022 5:04 AM
> To: dev@dpdk.org
> Cc: Stephen Hemminger <stephen@networkplumber.org>;
> koncept1@gmail.com; Pattan, Reshma <reshma.pattan@intel.com>
> Subject: [PATCH] dumpcap: fix list interfaces
>
> The change to do argument process before EAL init broke the support of
> list-interfaces option. Fix by setting flag and doing list-interfaces later.
>
> Fixes: a8dde09f97df ("app/dumpcap: allow help/version without primary
> process")
> Cc: koncept1@gmail.com
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
> app/dumpcap/main.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/app/dumpcap/main.c b/app/dumpcap/main.c index
> a6041d4ff495..490a0f050bc8 100644
> --- a/app/dumpcap/main.c
> +++ b/app/dumpcap/main.c
> @@ -63,6 +63,8 @@ static unsigned int ring_size = 2048; static const char
> *capture_comment; static uint32_t snaplen =
> RTE_MBUF_DEFAULT_BUF_SIZE; static bool dump_bpf;
> +static bool show_interfaces;
> +
> static struct {
> uint64_t duration; /* nanoseconds */
> unsigned long packets; /* number of packets in file */ @@ -256,7
> +258,7 @@ static void select_interface(const char *arg) }
>
> /* Display list of possible interfaces that can be used. */ -static void
> show_interfaces(void)
> +static void dump_interfaces(void)
> {
> char name[RTE_ETH_NAME_MAX_LEN];
> uint16_t p;
> @@ -266,6 +268,8 @@ static void show_interfaces(void)
> continue;
> printf("%u. %s\n", p, name);
> }
> +
> + exit(0);
> }
>
> static void compile_filter(void)
> @@ -353,8 +357,8 @@ static void parse_opts(int argc, char **argv)
> dump_bpf = true;
> break;
> case 'D':
> - show_interfaces();
> - exit(0);
> + show_interfaces = true;
> + break;
> case 'f':
> filter_str = optarg;
> break;
> @@ -529,9 +533,6 @@ static void dpdk_init(void)
>
> if (rte_eal_init(eal_argc, eal_argv) < 0)
> rte_exit(EXIT_FAILURE, "EAL init failed: is primary process
> running?\n");
> -
> - if (rte_eth_dev_count_avail() == 0)
> - rte_exit(EXIT_FAILURE, "No Ethernet ports found\n");
> }
>
> /* Create packet ring shared between callbacks and process */ @@ -789,6
> +790,12 @@ int main(int argc, char **argv)
> parse_opts(argc, argv);
> dpdk_init();
>
> + if (show_interfaces)
> + dump_interfaces();
> +
> + if (rte_eth_dev_count_avail() == 0)
> + rte_exit(EXIT_FAILURE, "No Ethernet ports found\n");
> +
> if (filter_str)
> compile_filter();
>
> --
> 2.35.1
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-10-10 0:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-25 23:34 [PATCH] dumpcap: fix list interfaces Stephen Hemminger
2022-09-29 13:22 ` Pattan, Reshma
2022-10-10 0:04 ` Thomas Monjalon
2022-10-04 15:25 ` Kaur, Arshdeep
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).