From: Kevin Traynor <ktraynor@redhat.com>
To: Raslan Darawsheh <rasland@mellanox.com>,
Matan Azrad <matan@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: make FDB default rule optional
Date: Fri, 31 Jan 2020 19:26:51 +0000 [thread overview]
Message-ID: <28aee1a6-ae9f-09fa-0ca2-d99fb48cc8ea@redhat.com> (raw)
In-Reply-To: <VI1PR05MB67189F95CD5BE2CA0047F8A1C2040@VI1PR05MB6718.eurprd05.prod.outlook.com>
On 30/01/2020 13:06, Raslan Darawsheh wrote:
> Hi,
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Matan Azrad
>> Sent: Tuesday, January 28, 2020 7:07 PM
>> To: Slava Ovsiienko <viacheslavo@mellanox.com>
>> Cc: dev@dpdk.org; stable@dpdk.org
>> Subject: [dpdk-dev] [PATCH] net/mlx5: make FDB default rule optional
>>
>> There are RDMA-CORE versions which are not supported multi-table for
>> some Mellanox mlx5 devices.
>>
>> Hence, the optimization added in commit [1] which forwards all the FDB
>> traffic to table 1 cannot be configured.
>>
>> Make the above optimization optional:
>> Do not fail when either table 1 cannot be created or the jump rule
>> (all =>jump to table 1) is not configured successfully.
>> In this case, all the flows will be configured to table 0.
>>
>> [1] commit b67b4ecbde22 ("net/mlx5: skip table zero to improve
>> insertion rate")
>>
Hi, can we replace with correct 'Fixes:' tag before it gets to master to
be consistent and so it can be found/used by stable scripts. Thanks.
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Matan Azrad <matan@mellanox.com>
>> ---
>> drivers/net/mlx5/mlx5.h | 1 +
>> drivers/net/mlx5/mlx5_flow.c | 6 ++++--
>> drivers/net/mlx5/mlx5_flow.h | 4 ++--
>> drivers/net/mlx5/mlx5_flow_dv.c | 11 ++++++-----
>> drivers/net/mlx5/mlx5_trigger.c | 11 ++++++++---
>> 5 files changed, 21 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
>> index 5818349..1fc2063 100644
>> --- a/drivers/net/mlx5/mlx5.h
>> +++ b/drivers/net/mlx5/mlx5.h
>> @@ -792,6 +792,7 @@ struct mlx5_priv {
>> /* UAR same-page access control required in 32bit implementations.
>> */
>> #endif
>> uint8_t skip_default_rss_reta; /* Skip configuration of default reta.
>> */
>> + uint8_t fdb_def_rule; /* Whether fdb jump to table 1 is configured.
>> */
>> };
>>
>> #define PORT_ID(priv) ((priv)->dev_data->port_id)
>> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
>> index 5c9fea6..ffaf8a2 100644
>> --- a/drivers/net/mlx5/mlx5_flow.c
>> +++ b/drivers/net/mlx5/mlx5_flow.c
>> @@ -5575,6 +5575,8 @@ struct mlx5_flow_counter *
>> * Value is part of flow rule created by request external to PMD.
>> * @param[in] group
>> * rte_flow group index value.
>> + * @param[out] fdb_def_rule
>> + * Whether fdb jump to table 1 is configured.
>> * @param[out] table
>> * HW table value.
>> * @param[out] error
>> @@ -5585,10 +5587,10 @@ struct mlx5_flow_counter *
>> */
>> int
>> mlx5_flow_group_to_table(const struct rte_flow_attr *attributes, bool
>> external,
>> - uint32_t group, uint32_t *table,
>> + uint32_t group, bool fdb_def_rule, uint32_t *table,
>> struct rte_flow_error *error)
>> {
>> - if (attributes->transfer && external) {
>> + if (attributes->transfer && external && fdb_def_rule) {
>> if (group == UINT32_MAX)
>> return rte_flow_error_set
>> (error, EINVAL,
>> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
>> index 39be5ba..82b4292 100644
>> --- a/drivers/net/mlx5/mlx5_flow.h
>> +++ b/drivers/net/mlx5/mlx5_flow.h
>> @@ -753,8 +753,8 @@ struct mlx5_flow_driver_ops {
>> uint32_t mlx5_flow_id_release(struct mlx5_flow_id_pool *pool,
>> uint32_t id);
>> int mlx5_flow_group_to_table(const struct rte_flow_attr *attributes,
>> - bool external, uint32_t group, uint32_t *table,
>> - struct rte_flow_error *error);
>> + bool external, uint32_t group, bool fdb_def_rule,
>> + uint32_t *table, struct rte_flow_error *error);
>> uint64_t mlx5_flow_hashfields_adjust(struct mlx5_flow *dev_flow, int
>> tunnel,
>> uint64_t layer_types,
>> uint64_t hash_fields);
>> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
>> b/drivers/net/mlx5/mlx5_flow_dv.c
>> index b90734e..d57d360 100644
>> --- a/drivers/net/mlx5/mlx5_flow_dv.c
>> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
>> @@ -3357,7 +3357,7 @@ struct field_modify_info modify_tcp[] = {
>> target_group =
>> ((const struct rte_flow_action_jump *)action->conf)->group;
>> ret = mlx5_flow_group_to_table(attributes, external, target_group,
>> - &table, error);
>> + true, &table, error);
>> if (ret)
>> return ret;
>> if (attributes->group == target_group)
>> @@ -4334,7 +4334,7 @@ struct field_modify_info modify_tcp[] = {
>> int ret;
>>
>> ret = mlx5_flow_group_to_table(attributes, external,
>> - attributes->group,
>> + attributes->group, !!priv->fdb_def_rule,
>> &table, error);
>> if (ret)
>> return ret;
>> @@ -7011,7 +7011,7 @@ struct field_modify_info modify_tcp[] = {
>> mhdr_res->ft_type = attr->egress ?
>> MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
>>
>> MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
>> ret = mlx5_flow_group_to_table(attr, dev_flow->external, attr-
>>> group,
>> - &table, error);
>> + !!priv->fdb_def_rule, &table, error);
>> if (ret)
>> return ret;
>> dev_flow->group = table;
>> @@ -7279,8 +7279,9 @@ struct field_modify_info modify_tcp[] = {
>> case RTE_FLOW_ACTION_TYPE_JUMP:
>> jump_data = action->conf;
>> ret = mlx5_flow_group_to_table(attr, dev_flow-
>>> external,
>> - jump_data->group,
>> &table,
>> - error);
>> + jump_data->group,
>> + !!priv->fdb_def_rule,
>> + &table, error);
>> if (ret)
>> return ret;
>> tbl = flow_dv_tbl_resource_get(dev, table,
>> diff --git a/drivers/net/mlx5/mlx5_trigger.c
>> b/drivers/net/mlx5/mlx5_trigger.c
>> index ab6937a..7e12cd5 100644
>> --- a/drivers/net/mlx5/mlx5_trigger.c
>> +++ b/drivers/net/mlx5/mlx5_trigger.c
>> @@ -423,9 +423,14 @@
>> }
>> mlx5_txq_release(dev, i);
>> }
>> - if (priv->config.dv_esw_en && !priv->config.vf)
>> - if (!mlx5_flow_create_esw_table_zero_flow(dev))
>> - goto error;
>> + if (priv->config.dv_esw_en && !priv->config.vf) {
>> + if (mlx5_flow_create_esw_table_zero_flow(dev))
>> + priv->fdb_def_rule = 1;
>> + else
>> + DRV_LOG(INFO, "port %u FDB default rule cannot
>> be"
>> + " configured - only Eswitch group 0 flows are"
>> + " supported.", dev->data->port_id);
>> + }
>> if (priv->isolated)
>> return 0;
>> if (dev->data->promiscuous) {
>> --
>> 1.8.3.1
>
>
> Patch applied to next-net-mlx,
>
> Kindest regards,
> Raslan Darawsheh
>
prev parent reply other threads:[~2020-01-31 19:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-28 17:06 Matan Azrad
2020-01-29 6:47 ` Slava Ovsiienko
2020-01-30 13:06 ` Raslan Darawsheh
2020-01-31 19:26 ` Kevin Traynor [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28aee1a6-ae9f-09fa-0ca2-d99fb48cc8ea@redhat.com \
--to=ktraynor@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=matan@mellanox.com \
--cc=rasland@mellanox.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).