From: Thomas Monjalon <thomas.monjalon@6wind.com>
To: Wenzhuo Lu <wenzhuo.lu@intel.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v3 36/36] doc: update release notes for e1000 base code update
Date: Tue, 27 Oct 2015 16:32:06 +0100 [thread overview]
Message-ID: <2926566.0QgzZF02lo@xps13> (raw)
In-Reply-To: <1444963882-30931-37-git-send-email-wenzhuo.lu@intel.com>
2015-10-16 10:51, Wenzhuo Lu:
> New Features
> ------------
>
> +* **Updated the e1000 base driver.**
> + The e1000 base driver was updated with several changes including the
> + following:
> +
> + * Add some new i218 devices
> + * Fix issue with link flap on 82579
> + * Fix issue with jumbo frame CRC failures in client
> + * Add support for inverted format ETrackId
> + * Add flags to set eee advertisement modes
> + * Prevent ulp flow if cable connected
> + * Cleanup NAHUM6LP_HW tags
Is it really a feature?
> + * Use the correct i210 register for EEMNGCTL
> + * Fix to enable both ulp and EEE in Sx state
> + * Fix link detect flow
> + * Set correct value of beacon duration
> + * Disable extension header parsing for IPv6
> + * Fix for i354 88E1112 PHY using AutoMedia Detect
> + * Implement 88E1543 PHY initialization
> + * Increase timeout of polling bit RSPCIPHY in check_reset_block
> + * Synchronization of MAC-PHY interface only on non- ME systems
Some of theses features are not easy to understand.
Please avoid to speak of the registers in the release notes.
Something more high level is expected.
> + See the git log for full details of the e1000/base changes.
This last sentence is valuable for any entry in the release notes.
Let's say it is implicit.
> Resolved Issues
> ---------------
Some of the fixes above should be in this section.
John, please could you check?
Thanks
next prev parent reply other threads:[~2015-10-27 15:33 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 6:34 [dpdk-dev] [PATCH 00/34] update e1000 base driver Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 01/34] e1000/base: update readme and copyright Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 02/34] e1000/base: add new devices Wenzhuo Lu
2015-10-14 16:00 ` Stephen Hemminger
2015-10-14 6:34 ` [dpdk-dev] [PATCH 03/34] e1000/base: fix issue with link flap on 82579 Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 04/34] e1000/base: fix issue with jumbo frame CRC failures in client Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 05/34] e1000/base: redundant PHY power down for i210 Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 06/34] e1000/base: add return value to the functions of setting receive address register Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 07/34] e1000/base: add defaults for i210 TX/RX PBSIZE Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 08/34] e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 09/34] e1000/base: add evaluation of e1000_nvm_read return value Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 10/34] e1000/base: change invariant return to not use variables Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 11/34] e1000/base: add return value handler when check manage mode Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 12/34] e1000/base: add return value handler for ESB2 controller init and reset Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 13/34] e1000/base: add support for inverted format ETrackId Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 14/34] e1000/base: add EEARBC_I210 for i210 Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 15/34] e1000/base: apply paranoia to macro arguments Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 16/34] e1000/base: add flags to set eee advertisement modes Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 17/34] e1000/base: prevent ulp flow if cable connected Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 18/34] e1000/base: fix TIPG value for non 10 half duplex mode Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 19/34] e1000/base: add return value for resume workaround Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 20/34] e1000/base: fix link detect flow Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 21/34] e1000/base: cleanup NAHUM6LP_HW tags Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 22/34] e1000/base: add bit for disable packetbuffer read Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 23/34] e1000/base: K1 flow fixes Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 24/34] e1000/base: remove FIXME comment Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 25/34] e1000/base: set correct value of beacon duration Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 26/34] e1000/base: disable extension header parsing for IPv6 Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 27/34] e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 28/34] e1000/base: increase timeout of polling bit RSPCIPHY in check_reset_block Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 29/34] e1000/base: implement 88E1543 PHY initialization Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 30/34] e1000/base: use the correct i210 register for EEMNGCTL Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 31/34] e1000/base: move the print to the right position Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 32/34] e1000/base: synchronization of MAC-PHY interface only on non- ME systems Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 33/34] e1000/base: fix to enable both ulp and EEE in Sx state Wenzhuo Lu
2015-10-14 6:34 ` [dpdk-dev] [PATCH 34/34] e1000/base: some minor change Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 00/35] update e1000 base code Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 01/35] e1000/base: update readme and copyright Wenzhuo Lu
2015-10-15 8:30 ` Mcnamara, John
2015-10-15 8:37 ` Lu, Wenzhuo
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 02/35] e1000/base: add new devices Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 03/35] e1000/base: fix issue with link flap on 82579 Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 04/35] e1000/base: fix issue with jumbo frame CRC failures in client Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 05/35] e1000/base: redundant PHY power down for i210 Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 06/35] e1000/base: add return value to the functions of setting receive address register Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 07/35] e1000/base: add defaults for i210 TX/RX PBSIZE Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 08/35] e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 09/35] e1000/base: add evaluation of e1000_nvm_read return value Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 10/35] e1000/base: change invariant return to not use variables Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 11/35] e1000/base: add return value handler when check manage mode Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 12/35] e1000/base: add return value handler for ESB2 controller init and reset Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 13/35] e1000/base: add support for inverted format ETrackId Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 14/35] e1000/base: add EEARBC_I210 for i210 Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 15/35] e1000/base: apply paranoia to macro arguments Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 16/35] e1000/base: add flags to set eee advertisement modes Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 17/35] e1000/base: prevent ulp flow if cable connected Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 18/35] e1000/base: fix TIPG value for non 10 half duplex mode Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 19/35] e1000/base: add return value for resume workaround Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 20/35] e1000/base: fix link detect flow Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 21/35] e1000/base: cleanup NAHUM6LP_HW tags Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 22/35] e1000/base: add bit for disable packetbuffer read Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 23/35] e1000/base: K1 flow fixes Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 24/35] e1000/base: remove FIXME comment Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 25/35] e1000/base: set correct value of beacon duration Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 26/35] e1000/base: disable extension header parsing for IPv6 Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 27/35] e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 28/35] e1000/base: increase timeout of polling bit RSPCIPHY in check_reset_block Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 29/35] e1000/base: implement 88E1543 PHY initialization Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 30/35] e1000/base: use the correct i210 register for EEMNGCTL Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 31/35] e1000/base: move the print to the right position Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 32/35] e1000/base: synchronization of MAC-PHY interface only on non- ME systems Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 33/35] e1000/base: fix to enable both ulp and EEE in Sx state Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 34/35] e1000/base: some minor change Wenzhuo Lu
2015-10-15 2:03 ` [dpdk-dev] [PATCH v2 35/35] e1000: add new devices Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 00/36] update e1000 base code Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 01/36] e1000/base: update readme and copyright Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 02/36] e1000/base: add new devices Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 03/36] e1000/base: fix issue with link flap on 82579 Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 04/36] e1000/base: fix issue with jumbo frame CRC failures in client Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 05/36] e1000/base: redundant PHY power down for i210 Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 06/36] e1000/base: add return value to the functions of setting receive address register Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 07/36] e1000/base: add defaults for i210 TX/RX PBSIZE Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 08/36] e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after commencing HW reset Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 09/36] e1000/base: add evaluation of e1000_nvm_read return value Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 10/36] e1000/base: change invariant return to not use variables Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 11/36] e1000/base: add return value handler when check manage mode Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 12/36] e1000/base: add return value handler for ESB2 controller init and reset Wenzhuo Lu
2015-10-16 2:50 ` [dpdk-dev] [PATCH v3 13/36] e1000/base: add support for inverted format ETrackId Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 14/36] e1000/base: add EEARBC_I210 for i210 Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 15/36] e1000/base: apply paranoia to macro arguments Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 16/36] e1000/base: add flags to set eee advertisement modes Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 17/36] e1000/base: prevent ulp flow if cable connected Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 18/36] e1000/base: fix TIPG value for non 10 half duplex mode Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 19/36] e1000/base: add return value for resume workaround Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 20/36] e1000/base: fix link detect flow Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 21/36] e1000/base: cleanup NAHUM6LP_HW tags Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 22/36] e1000/base: add bit for disable packetbuffer read Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 23/36] e1000/base: K1 flow fixes Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 24/36] e1000/base: remove FIXME comment Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 25/36] e1000/base: set correct value of beacon duration Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 26/36] e1000/base: disable extension header parsing for IPv6 Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 27/36] e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 28/36] e1000/base: increase timeout of polling bit RSPCIPHY in check_reset_block Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 29/36] e1000/base: implement 88E1543 PHY initialization Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 30/36] e1000/base: use the correct i210 register for EEMNGCTL Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 31/36] e1000/base: move the print to the right position Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 32/36] e1000/base: synchronization of MAC-PHY interface only on non- ME systems Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 33/36] e1000/base: fix to enable both ulp and EEE in Sx state Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 34/36] e1000/base: some minor change Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 35/36] e1000: add new devices Wenzhuo Lu
2015-10-16 2:51 ` [dpdk-dev] [PATCH v3 36/36] doc: update release notes for e1000 base code update Wenzhuo Lu
2015-10-27 15:32 ` Thomas Monjalon [this message]
2015-10-28 2:33 ` Lu, Wenzhuo
2015-10-27 15:34 ` [dpdk-dev] [PATCH v3 00/36] update e1000 base code Thomas Monjalon
2015-10-28 1:58 ` Lu, Wenzhuo
2015-10-19 16:03 ` [dpdk-dev] [PATCH 00/34] update e1000 base driver Thomas Monjalon
2015-10-20 0:59 ` Lu, Wenzhuo
2015-10-21 10:21 ` Glynn, Michael J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2926566.0QgzZF02lo@xps13 \
--to=thomas.monjalon@6wind.com \
--cc=dev@dpdk.org \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).