DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ziyang Xuan <xuanziyang2@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <xuanziyang2@huawei.com>,
	<waterman.cao@huawei.com>, <shahar.belkar@huawei.com>,
	<luoxianjun@huawei.com>, <tanya.brokhman@huawei.com>,
	<wulike1@huawei.com>, <zhouguoyang@huawei.com>,
	Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Subject: [dpdk-dev] [PATCH v1 14/15] net/hinic: support LRO offload
Date: Fri, 6 Sep 2019 20:55:34 +0800	[thread overview]
Message-ID: <2bd6d2b432b7f390b28323f67c35a4b3bbb63ccc.1567773212.git.xuanziyang2@huawei.com> (raw)
In-Reply-To: <cover.1567773211.git.xuanziyang2@huawei.com>

From: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>

This patch supports LRO offload.

Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
---
 drivers/net/hinic/hinic_pmd_ethdev.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index 451866f..df661df 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -64,6 +64,9 @@
 #define HINIC_PKTLEN_TO_MTU(pktlen)	\
 	((pktlen) - (ETH_HLEN + ETH_CRC_LEN))
 
+/* lro numer limit for one packet */
+#define HINIC_LRO_WQE_NUM_DEFAULT	8
+
 /** Driver-specific log messages type. */
 int hinic_logtype;
 
@@ -722,7 +725,8 @@ static void hinic_get_speed_capa(struct rte_eth_dev *dev, uint32_t *speed_capa)
 				DEV_RX_OFFLOAD_TCP_CKSUM |
 				DEV_RX_OFFLOAD_VLAN_FILTER |
 				DEV_RX_OFFLOAD_SCATTER |
-				DEV_RX_OFFLOAD_JUMBO_FRAME;
+				DEV_RX_OFFLOAD_JUMBO_FRAME |
+				DEV_RX_OFFLOAD_TCP_LRO;
 
 	info->tx_queue_offload_capa = 0;
 	info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT |
@@ -781,6 +785,7 @@ static int hinic_rxtx_configure(struct rte_eth_dev *dev)
 {
 	int err;
 	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+	bool lro_en;
 
 	/* rx configure, if rss enable, need to init default configuration */
 	err = hinic_rx_configure(dev);
@@ -797,6 +802,18 @@ static int hinic_rxtx_configure(struct rte_eth_dev *dev)
 		goto set_rx_mode_fail;
 	}
 
+	/* config lro */
+	lro_en = dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO ?
+			true : false;
+
+	err = hinic_set_rx_lro(nic_dev->hwdev, lro_en, lro_en,
+				HINIC_LRO_WQE_NUM_DEFAULT);
+	if (err) {
+		PMD_DRV_LOG(ERR, "%s lro failed, err: %d",
+			lro_en ? "Enable" : "Disable", err);
+		goto set_rx_mode_fail;
+	}
+
 	return HINIC_OK;
 
 set_rx_mode_fail:
@@ -2418,11 +2435,6 @@ static int hinic_set_default_hw_feature(struct hinic_nic_dev *nic_dev)
 	if (err)
 		return err;
 
-	/* disable LRO */
-	err = hinic_set_rx_lro(nic_dev->hwdev, 0, 0, (u8)0);
-	if (err)
-		return err;
-
 	/* Set pause enable, and up will disable pfc. */
 	err = hinic_set_default_pause_feature(nic_dev);
 	if (err)
@@ -2811,7 +2823,7 @@ static void hinic_dev_close(struct rte_eth_dev *dev)
 static const struct eth_dev_ops hinic_pmd_vf_ops = {
 	.dev_configure                 = hinic_dev_configure,
 	.dev_infos_get                 = hinic_dev_infos_get,
-	.fw_version_get		       = hinic_fw_version_get,
+	.fw_version_get                = hinic_fw_version_get,
 	.rx_queue_setup                = hinic_rx_queue_setup,
 	.tx_queue_setup                = hinic_tx_queue_setup,
 	.dev_start                     = hinic_dev_start,
-- 
1.8.3.1


  parent reply	other threads:[~2019-09-06 12:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 12:49 [dpdk-dev] [PATCH v1 00/15] Add advanced features for Huawei hinic pmd Ziyang Xuan
2019-09-06 12:49 ` [dpdk-dev] [PATCH v1 01/15] net/hinic/base: add mbox command channel for SRIOV Ziyang Xuan
2019-09-06 12:50 ` [dpdk-dev] [PATCH v1 02/15] net/hinic/base: add HW interfaces of SRIOV Ziyang Xuan
2019-09-06 12:50 ` [dpdk-dev] [PATCH v1 03/15] net/hinic: add VF PMD operation interfaces Ziyang Xuan
2019-09-06 12:51 ` [dpdk-dev] [PATCH v1 04/15] net/hinic: add VLAN filter and offload Ziyang Xuan
2019-09-06 12:51 ` [dpdk-dev] [PATCH v1 05/15] net/hinic: add allmulticast mode and MTU set Ziyang Xuan
2019-09-06 12:52 ` [dpdk-dev] [PATCH v1 06/15] net/hinic: add unicast and multicast MAC set Ziyang Xuan
2019-09-06 12:52 ` [dpdk-dev] [PATCH v1 07/15] net/hinic: add fdir config interface Ziyang Xuan
2019-09-06 12:52 ` [dpdk-dev] [PATCH v1 08/15] net/hinic: add fdir validate flow operations Ziyang Xuan
2019-09-06 12:53 ` [dpdk-dev] [PATCH v1 09/15] net/hinic: create and destroy ntuple filter Ziyang Xuan
2019-09-06 12:53 ` [dpdk-dev] [PATCH v1 10/15] net/hinic: create and destroy fdir filter Ziyang Xuan
2019-09-06 12:54 ` [dpdk-dev] [PATCH v1 11/15] net/hinic: flush " Ziyang Xuan
2019-09-06 12:54 ` [dpdk-dev] [PATCH v1 12/15] net/hinic: set link down and up Ziyang Xuan
2019-09-06 12:55 ` [dpdk-dev] [PATCH v1 13/15] net/hinic: support inner L3 checksum offload Ziyang Xuan
2019-09-06 12:55 ` Ziyang Xuan [this message]
2019-09-06 12:56 ` [dpdk-dev] [PATCH v1 15/15] net/hinic: add hinic PMD doc files Ziyang Xuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2bd6d2b432b7f390b28323f67c35a4b3bbb63ccc.1567773212.git.xuanziyang2@huawei.com \
    --to=xuanziyang2@huawei.com \
    --cc=cloud.wangxiaoyun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=luoxianjun@huawei.com \
    --cc=shahar.belkar@huawei.com \
    --cc=tanya.brokhman@huawei.com \
    --cc=waterman.cao@huawei.com \
    --cc=wulike1@huawei.com \
    --cc=zhouguoyang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).