* Re: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id
2019-11-07 8:40 [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id Raslan Darawsheh
@ 2019-11-07 9:15 ` Wisam Monther
2019-11-07 9:25 ` Raslan Darawsheh
2019-11-07 9:25 ` [dpdk-dev] [PATCH v2] " Raslan Darawsheh
2019-11-07 9:36 ` [dpdk-dev] [PATCH v3] " Raslan Darawsheh
2 siblings, 1 reply; 9+ messages in thread
From: Wisam Monther @ 2019-11-07 9:15 UTC (permalink / raw)
To: Raslan Darawsheh, Slava Ovsiienko; +Cc: dev, Asaf Penso
Hey Raslan,
You are missing PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF in mlx5.c/mlx5_pci_probe()
Otherwise the PCI for CX6DXVF will not be recognized correctly
BRs,
Wisam Jaddo
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Raslan Darawsheh
Sent: Thursday, November 7, 2019 10:40 AM
To: Slava Ovsiienko
Cc: dev@dpdk.org; Asaf Penso
Subject: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id
This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
- ConnectX-6DX device ID
- ConnectX-6DX SRIOV device ID
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
doc/guides/rel_notes/release_19_11.rst | 1 +
drivers/net/mlx5/mlx5.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
* Added support for VLAN set VID offload command.
* Added support for matching on packets withe Geneve tunnel header.
* Added hairpin support.
+ * Added ConnectX6-DX support.
* **Updated the AF_XDP PMD.**
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
};
/* Request types for IPC. */
--
2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id
2019-11-07 9:15 ` Wisam Monther
@ 2019-11-07 9:25 ` Raslan Darawsheh
0 siblings, 0 replies; 9+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 9:25 UTC (permalink / raw)
To: Wisam Monther, Slava Ovsiienko; +Cc: dev, Asaf Penso
Thanks for noticing this,
I forgot to add these in the commit, just sent a v2 with these included.
Kindest regards,
Raslan Darawsheh
> -----Original Message-----
> From: Wisam Monther <wisamm@mellanox.com>
> Sent: Thursday, November 7, 2019 11:15 AM
> To: Raslan Darawsheh <rasland@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>
> Subject: RE: [PATCH] net/mlx5: add ConnectX6-DX device id
>
> Hey Raslan,
>
> You are missing PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF in
> mlx5.c/mlx5_pci_probe()
> Otherwise the PCI for CX6DXVF will not be recognized correctly
>
> BRs,
> Wisam Jaddo
>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Raslan Darawsheh
> Sent: Thursday, November 7, 2019 10:40 AM
> To: Slava Ovsiienko
> Cc: dev@dpdk.org; Asaf Penso
> Subject: [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id
>
> This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
> - ConnectX-6DX device ID
> - ConnectX-6DX SRIOV device ID
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
> doc/guides/rel_notes/release_19_11.rst | 1 +
> drivers/net/mlx5/mlx5.h | 2 ++
> 2 files changed, 3 insertions(+)
>
> diff --git a/doc/guides/rel_notes/release_19_11.rst
> b/doc/guides/rel_notes/release_19_11.rst
> index 23182d1..2920fa2 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -169,6 +169,7 @@ New Features
> * Added support for VLAN set VID offload command.
> * Added support for matching on packets withe Geneve tunnel header.
> * Added hairpin support.
> + * Added ConnectX6-DX support.
>
> * **Updated the AF_XDP PMD.**
>
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> f644998..b56dae1 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -55,6 +55,8 @@ enum {
> PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
> PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
> PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
> + PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
> + PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
> };
>
> /* Request types for IPC. */
> --
> 2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread
* [dpdk-dev] [PATCH v2] net/mlx5: add ConnectX6-DX device id
2019-11-07 8:40 [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id Raslan Darawsheh
2019-11-07 9:15 ` Wisam Monther
@ 2019-11-07 9:25 ` Raslan Darawsheh
2019-11-07 9:36 ` [dpdk-dev] [PATCH v3] " Raslan Darawsheh
2 siblings, 0 replies; 9+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 9:25 UTC (permalink / raw)
To: Slava Ovsiienko; +Cc: dev, Asaf Penso, Wisam Monther
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- ConnectX-6DX device ID
- ConnectX-6DX SRIOV device ID
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
v2: add missing documentation and update pci id map
---
doc/guides/nics/mlx5.rst | 36 +++++++++++++++++++++-------------
doc/guides/rel_notes/release_19_11.rst | 1 +
drivers/net/mlx5/mlx5.c | 10 ++++++++++
drivers/net/mlx5/mlx5.h | 2 ++
4 files changed, 35 insertions(+), 14 deletions(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 4f1093f..0dec788 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -7,9 +7,9 @@ MLX5 poll mode driver
The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6** and **Mellanox BlueField** families
-of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF)
-in SR-IOV context.
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6DX** and
+**Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
+as well as their virtual functions (VF) in SR-IOV context.
Information and documentation about these adapters can be found on the
`Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
@@ -313,8 +313,10 @@ Run-time configuration
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
- - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
+ - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
- ``rxq_cqe_pad_en`` parameter [int]
@@ -344,8 +346,10 @@ Run-time configuration
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
- - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
+ - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
- ``mprq_en`` parameter [int]
@@ -537,11 +541,11 @@ Run-time configuration
- ``txq_mpw_en`` parameter [int]
A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
- ConnectX-6 and BlueField. eMPW allows the TX burst function to pack up multiple
- packets in a single descriptor session in order to save PCI bandwidth and improve
- performance at the cost of a slightly higher CPU usage. When ``txq_inline_mpw``
- is set along with ``txq_mpw_en``, TX burst function copies entire packet
- data on to TX descriptor instead of including pointer of packet.
+ ConnectX-6, ConnectX-6 DX and BlueField. eMPW allows the TX burst function to pack
+ up multiple packets in a single descriptor session in order to save PCI bandwidth
+ and improve performance at the cost of a slightly higher CPU usage. When
+ ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
+ entire packet data on to TX descriptor instead of including pointer of packet.
The Enhanced Multi-Packet Write feature is enabled by default if NIC supports
it, can be disabled by explicit specifying 0 value for ``txq_mpw_en`` option.
@@ -550,8 +554,8 @@ Run-time configuration
- ``tx_vec_en`` parameter [int]
- A nonzero value enables Tx vector on ConnectX-5, ConnectX-6 and BlueField
- NICs if the number of global Tx queues on the port is less than
+ A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField NICs if the number of global Tx queues on the port is less than
``txqs_max_vec``. The parameter is deprecated and ignored.
- ``rx_vec_en`` parameter [int]
@@ -794,6 +798,7 @@ Mellanox OFED/EN
- ConnectX-5: **16.21.1000** and above.
- ConnectX-5 Ex: **16.21.1000** and above.
- ConnectX-6: **20.99.5374** and above.
+ - ConnectX-6 DX: **22.27.0090** and above.
- BlueField: **18.25.1010** and above.
While these libraries and kernel modules are available on OpenFabrics
@@ -837,6 +842,9 @@ Supported NICs
* Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
+* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100g)
+* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200g)
Quick Start Guide on OFED/EN
----------------------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
* Added support for VLAN set VID offload command.
* Added support for matching on packets withe Geneve tunnel header.
* Added hairpin support.
+ * Added ConnectX6-DX support.
* **Updated the AF_XDP PMD.**
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 72c30bf..594fac1 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -2891,6 +2891,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX6DX:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
dev_config.vf = 1;
break;
default:
@@ -3061,6 +3063,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
},
{
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
+ },
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+ },
+ {
.vendor_id = 0
}
};
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
};
/* Request types for IPC. */
--
2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread* [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
2019-11-07 8:40 [dpdk-dev] [PATCH] net/mlx5: add ConnectX6-DX device id Raslan Darawsheh
2019-11-07 9:15 ` Wisam Monther
2019-11-07 9:25 ` [dpdk-dev] [PATCH v2] " Raslan Darawsheh
@ 2019-11-07 9:36 ` Raslan Darawsheh
2019-11-07 11:27 ` Slava Ovsiienko
2019-11-07 12:39 ` Raslan Darawsheh
2 siblings, 2 replies; 9+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 9:36 UTC (permalink / raw)
To: Slava Ovsiienko; +Cc: dev, Asaf Penso, Wisam Monther
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- ConnectX-6DX device ID
- ConnectX-6DX SRIOV device ID
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
---
v3: only set vf bit for CONNECTX6DXVF
v2: add missing documentation and update pci id map
---
doc/guides/nics/mlx5.rst | 36 +++++++++++++++++++++-------------
doc/guides/rel_notes/release_19_11.rst | 1 +
drivers/net/mlx5/mlx5.c | 9 +++++++++
drivers/net/mlx5/mlx5.h | 2 ++
4 files changed, 34 insertions(+), 14 deletions(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 4f1093f..0dec788 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -7,9 +7,9 @@ MLX5 poll mode driver
The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
-ConnectX-5**, **Mellanox ConnectX-6** and **Mellanox BlueField** families
-of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF)
-in SR-IOV context.
+ConnectX-5**, **Mellanox ConnectX-6**, **Mellanox ConnectX-6DX** and
+**Mellanox BlueField** families of 10/25/40/50/100/200 Gb/s adapters
+as well as their virtual functions (VF) in SR-IOV context.
Information and documentation about these adapters can be found on the
`Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
@@ -313,8 +313,10 @@ Run-time configuration
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
- - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
+ - POWER9 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
- ``rxq_cqe_pad_en`` parameter [int]
@@ -344,8 +346,10 @@ Run-time configuration
Supported on:
- - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
- - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and BlueField.
+ - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
+ - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField.
- ``mprq_en`` parameter [int]
@@ -537,11 +541,11 @@ Run-time configuration
- ``txq_mpw_en`` parameter [int]
A nonzero value enables Enhanced Multi-Packet Write (eMPW) for ConnectX-5,
- ConnectX-6 and BlueField. eMPW allows the TX burst function to pack up multiple
- packets in a single descriptor session in order to save PCI bandwidth and improve
- performance at the cost of a slightly higher CPU usage. When ``txq_inline_mpw``
- is set along with ``txq_mpw_en``, TX burst function copies entire packet
- data on to TX descriptor instead of including pointer of packet.
+ ConnectX-6, ConnectX-6 DX and BlueField. eMPW allows the TX burst function to pack
+ up multiple packets in a single descriptor session in order to save PCI bandwidth
+ and improve performance at the cost of a slightly higher CPU usage. When
+ ``txq_inline_mpw`` is set along with ``txq_mpw_en``, TX burst function copies
+ entire packet data on to TX descriptor instead of including pointer of packet.
The Enhanced Multi-Packet Write feature is enabled by default if NIC supports
it, can be disabled by explicit specifying 0 value for ``txq_mpw_en`` option.
@@ -550,8 +554,8 @@ Run-time configuration
- ``tx_vec_en`` parameter [int]
- A nonzero value enables Tx vector on ConnectX-5, ConnectX-6 and BlueField
- NICs if the number of global Tx queues on the port is less than
+ A nonzero value enables Tx vector on ConnectX-5, ConnectX-6, ConnectX-6 DX
+ and BlueField NICs if the number of global Tx queues on the port is less than
``txqs_max_vec``. The parameter is deprecated and ignored.
- ``rx_vec_en`` parameter [int]
@@ -794,6 +798,7 @@ Mellanox OFED/EN
- ConnectX-5: **16.21.1000** and above.
- ConnectX-5 Ex: **16.21.1000** and above.
- ConnectX-6: **20.99.5374** and above.
+ - ConnectX-6 DX: **22.27.0090** and above.
- BlueField: **18.25.1010** and above.
While these libraries and kernel modules are available on OpenFabrics
@@ -837,6 +842,9 @@ Supported NICs
* Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+* Mellanox(R) ConnectX(R)-6 200G MCX654106A-HCAT (4x200G)
+* Mellanox(R) ConnectX(R)-6DX EN 100G MCX623106AN-CDAT (2*100g)
+* Mellanox(R) ConnectX(R)-6DX EN 200G MCX623105AN-VDAT (1*200g)
Quick Start Guide on OFED/EN
----------------------------
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 23182d1..2920fa2 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -169,6 +169,7 @@ New Features
* Added support for VLAN set VID offload command.
* Added support for matching on packets withe Geneve tunnel header.
* Added hairpin support.
+ * Added ConnectX6-DX support.
* **Updated the AF_XDP PMD.**
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 72c30bf..102c6ab 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -2891,6 +2891,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF:
dev_config.vf = 1;
break;
default:
@@ -3061,6 +3062,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
},
{
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
+ },
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF)
+ },
+ {
.vendor_id = 0
}
};
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f644998..b56dae1 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -55,6 +55,8 @@ enum {
PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3,
PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b,
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DX = 0x101d,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
};
/* Request types for IPC. */
--
2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
2019-11-07 9:36 ` [dpdk-dev] [PATCH v3] " Raslan Darawsheh
@ 2019-11-07 11:27 ` Slava Ovsiienko
2019-11-07 12:39 ` Raslan Darawsheh
1 sibling, 0 replies; 9+ messages in thread
From: Slava Ovsiienko @ 2019-11-07 11:27 UTC (permalink / raw)
To: Raslan Darawsheh; +Cc: dev, Asaf Penso, Wisam Monther
> -----Original Message-----
> From: Raslan Darawsheh <rasland@mellanox.com>
> Sent: Thursday, November 7, 2019 11:36
> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: [PATCH v3] net/mlx5: add ConnectX6-DX device id
>
> This adds new device id to the list of Mellanox devices that runs mlx5 PMD.
> - ConnectX-6DX device ID
> - ConnectX-6DX SRIOV device ID
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
> v3: only set vf bit for CONNECTX6DXVF
> v2: add missing documentation and update pci id map
> ---
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
2019-11-07 9:36 ` [dpdk-dev] [PATCH v3] " Raslan Darawsheh
2019-11-07 11:27 ` Slava Ovsiienko
@ 2019-11-07 12:39 ` Raslan Darawsheh
2019-11-07 13:40 ` Ferruh Yigit
1 sibling, 1 reply; 9+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 12:39 UTC (permalink / raw)
To: Raslan Darawsheh, Slava Ovsiienko; +Cc: dev, Asaf Penso, Wisam Monther
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> Sent: Thursday, November 7, 2019 11:36 AM
> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
>
> This adds new device id to the list of Mellanox devices
> that runs mlx5 PMD.
> - ConnectX-6DX device ID
> - ConnectX-6DX SRIOV device ID
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> ---
> v3: only set vf bit for CONNECTX6DXVF
> v2: add missing documentation and update pci id map
> ---
>
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
2019-11-07 12:39 ` Raslan Darawsheh
@ 2019-11-07 13:40 ` Ferruh Yigit
2019-11-07 13:58 ` Raslan Darawsheh
0 siblings, 1 reply; 9+ messages in thread
From: Ferruh Yigit @ 2019-11-07 13:40 UTC (permalink / raw)
To: Raslan Darawsheh, Slava Ovsiienko; +Cc: dev, Asaf Penso, Wisam Monther
On 11/7/2019 12:39 PM, Raslan Darawsheh wrote:
> Hi,
>
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
>> Sent: Thursday, November 7, 2019 11:36 AM
>> To: Slava Ovsiienko <viacheslavo@mellanox.com>
>> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
>> <wisamm@mellanox.com>
>> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
>>
>> This adds new device id to the list of Mellanox devices
>> that runs mlx5 PMD.
>> - ConnectX-6DX device ID
>> - ConnectX-6DX SRIOV device ID
>>
>> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
>> ---
>> v3: only set vf bit for CONNECTX6DXVF
>> v2: add missing documentation and update pci id map
>> ---
>>
>
>
> Patch applied to next-net-mlx,
>
Is supported web page [1] up to date with this information? If not can you also
send a web patch?
[1]
https://core.dpdk.org/supported/
https://core.dpdk.org/supported/nics/mellanox/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
2019-11-07 13:40 ` Ferruh Yigit
@ 2019-11-07 13:58 ` Raslan Darawsheh
0 siblings, 0 replies; 9+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 13:58 UTC (permalink / raw)
To: Ferruh Yigit, Slava Ovsiienko; +Cc: dev, Asaf Penso, Wisam Monther
Hi Ferruh,
Just sent a patch for it.
http://mails.dpdk.org/archives/web/2019-November/001249.html
Kindest regards,
Raslan Darawsheh
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Thursday, November 7, 2019 3:41 PM
> To: Raslan Darawsheh <rasland@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> <wisamm@mellanox.com>
> Subject: Re: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
>
> On 11/7/2019 12:39 PM, Raslan Darawsheh wrote:
> > Hi,
> >
> >> -----Original Message-----
> >> From: dev <dev-bounces@dpdk.org> On Behalf Of Raslan Darawsheh
> >> Sent: Thursday, November 7, 2019 11:36 AM
> >> To: Slava Ovsiienko <viacheslavo@mellanox.com>
> >> Cc: dev@dpdk.org; Asaf Penso <asafp@mellanox.com>; Wisam Monther
> >> <wisamm@mellanox.com>
> >> Subject: [dpdk-dev] [PATCH v3] net/mlx5: add ConnectX6-DX device id
> >>
> >> This adds new device id to the list of Mellanox devices that runs
> >> mlx5 PMD.
> >> - ConnectX-6DX device ID
> >> - ConnectX-6DX SRIOV device ID
> >>
> >> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> >> ---
> >> v3: only set vf bit for CONNECTX6DXVF
> >> v2: add missing documentation and update pci id map
> >> ---
> >>
> >
> >
> > Patch applied to next-net-mlx,
> >
>
> Is supported web page [1] up to date with this information? If not can you
> also send a web patch?
>
> [1]
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcore.
> dpdk.org%2Fsupported%2F&data=02%7C01%7Crasland%40mellanox.co
> m%7Cf52842fd310346fb709808d763881845%7Ca652971c7d2e4d9ba6a4d1492
> 56f461b%7C0%7C1%7C637087308500799095&sdata=IuJG75oSQMr6zPBc
> thp%2BGH0GTgAwL53g1m57EGSvZgg%3D&reserved=0
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcore.
> dpdk.org%2Fsupported%2Fnics%2Fmellanox%2F&data=02%7C01%7Cra
> sland%40mellanox.com%7Cf52842fd310346fb709808d763881845%7Ca652971
> c7d2e4d9ba6a4d149256f461b%7C0%7C1%7C637087308500809084&sdata
> =M2YLbet%2BFlt7XvO2IxeFtlUm0zxwasJK8NXR%2Fl9oOqk%3D&reserv
> ed=0
^ permalink raw reply [flat|nested] 9+ messages in thread