* [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev
@ 2021-09-10 17:27 Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
` (9 more replies)
0 siblings, 10 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
This patchset first adds some additional command line options to the
existing ioatfwd application to enhance usability.
The last 3 patches of this set then port the ioatfwd application to use the
dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
all variables etc are renamed to be more appropriate for using with the
DMAdev library. Lastly, the application itself is renamed to "dmafwd".
Depends-on: series-18738 ("support dmadev")
Kevin Laatz (3):
examples/ioat: port application to dmadev APIs
examples/ioat: update naming to match change to dmadev
examples/ioat: rename application to dmafwd
Konstantin Ananyev (3):
examples/ioat: always use same lcore for both DMA requests enqueue and
dequeue
examples/ioat: add cmd-line option to control DMA batch size
examples/ioat: add cmd line option to control max frame size
.../sample_app_ug/{ioat.rst => dma.rst} | 114 ++--
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 597 +++++++++---------
examples/{ioat => dma}/meson.build | 10 +-
examples/meson.build | 2 +-
7 files changed, 381 insertions(+), 352 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (62%)
rename examples/{ioat => dma}/meson.build (63%)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
` (8 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 185 ++++++++++++++++++++++------------------
1 file changed, 101 insertions(+), 84 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 0c413180f8..617c8c3dfb 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
/* Perform packet copy there is a user-defined function. 8< */
static inline void
-pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
{
- /* Copy packet metadata */
- rte_memcpy(&dst->rearm_data,
- &src->rearm_data,
- offsetof(struct rte_mbuf, cacheline1)
- - offsetof(struct rte_mbuf, rearm_data));
+ dst->data_off = src->data_off;
+ memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
+ offsetof(struct rte_mbuf, buf_len) -
+ offsetof(struct rte_mbuf, rx_descriptor_fields1));
+}
- /* Copy packet data */
+/* Copy packet data */
+static inline void
+pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+{
rte_memcpy(rte_pktmbuf_mtod(dst, char *),
rte_pktmbuf_mtod(src, char *), src->data_len);
}
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf **pkts,
+ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
int ret;
uint32_t i;
- struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
-
- const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
- &pkts[0]->rearm_data);
-
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_copy, nb_rx);
-
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
ret = rte_ioat_enqueue_copy(dev_id,
- pkts[i]->buf_iova - addr_offset,
- pkts_copy[i]->buf_iova - addr_offset,
- rte_pktmbuf_data_len(pkts[i]) + addr_offset,
+ rte_pktmbuf_iova(pkts[i]),
+ rte_pktmbuf_iova(pkts_copy[i]),
+ rte_pktmbuf_data_len(pkts[i]),
(uintptr_t)pkts[i],
(uintptr_t)pkts_copy[i]);
@@ -376,20 +369,50 @@ ioat_enqueue_packets(struct rte_mbuf **pkts,
}
ret = i;
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
- nb_rx - i);
-
return ret;
}
+static inline uint32_t
+ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+ uint32_t num, uint16_t dev_id)
+{
+ uint32_t n;
+
+ n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
+
+ return n;
+}
+
+static inline uint32_t
+ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+ uint16_t dev_id)
+{
+ int32_t rc;
+ /* Dequeue the mbufs from IOAT device. Since all memory
+ * is DPDK pinned memory and therefore all addresses should
+ * be valid, we don't check for copy errors
+ */
+ rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
+ (void *)src, (void *)dst);
+ if (rc < 0) {
+ RTE_LOG(CRIT, IOAT,
+ "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
+ dev_id, rte_errno);
+ rc = 0;
+ }
+ return rc;
+}
+
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
static void
ioat_rx_port(struct rxtx_port_config *rx_config)
{
+ int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
for (i = 0; i < rx_config->nb_queues; i++) {
@@ -401,40 +424,54 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
+ ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst_copy, nb_rx);
+
+ if (unlikely(ret < 0))
+ rte_exit(EXIT_FAILURE,
+ "Unable to allocate memory.\n");
+
+ for (j = 0; j < nb_rx; j++)
+ pktmbuf_metadata_copy(pkts_burst[j],
+ pkts_burst_copy[j]);
+
if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Perform packet hardware copy */
- nb_enq = ioat_enqueue_packets(pkts_burst,
+
+ /* enqueue packets for hardware copy */
+ nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
nb_rx, rx_config->ioat_ids[i]);
- if (nb_enq > 0)
- rte_ioat_perform_ops(rx_config->ioat_ids[i]);
- } else {
- /* Perform packet software copy, free source packets */
- int ret;
- struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst_copy, nb_rx);
+ /* free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst[nb_enq],
+ nb_rx - nb_enq);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE,
- "Unable to allocate memory.\n");
+ port_statistics.copy_dropped[rx_config->rxtx_port] +=
+ (nb_rx - nb_enq);
+ /* get completed copies */
+ nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ } else {
+ /* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
pktmbuf_sw_copy(pkts_burst[j],
pkts_burst_copy[j]);
+ }
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst, nb_rx);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst, nb_rx);
- nb_enq = rte_ring_enqueue_burst(
- rx_config->rx_to_tx_ring,
- (void *)pkts_burst_copy, nb_rx, NULL);
+ nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
+ (void *)pkts_burst_copy, nb_rx, NULL);
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&pkts_burst_copy[nb_enq],
- nb_rx - nb_enq);
- }
+ /* Free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
port_statistics.copy_dropped[rx_config->rxtx_port] +=
(nb_rx - nb_enq);
@@ -446,51 +483,33 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
static void
ioat_tx_port(struct rxtx_port_config *tx_config)
{
- uint32_t i, j, nb_dq = 0;
- struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
- struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
+ uint32_t i, j, nb_dq, nb_tx;
+ struct rte_mbuf *mbufs[MAX_PKT_BURST];
for (i = 0; i < tx_config->nb_queues; i++) {
- if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Dequeue the mbufs from IOAT device. Since all memory
- * is DPDK pinned memory and therefore all addresses should
- * be valid, we don't check for copy errors
- */
- nb_dq = rte_ioat_completed_ops(
- tx_config->ioat_ids[i], MAX_PKT_BURST, NULL, NULL,
- (void *)mbufs_src, (void *)mbufs_dst);
- } else {
- /* Dequeue the mbufs from rx_to_tx_ring. */
- nb_dq = rte_ring_dequeue_burst(
- tx_config->rx_to_tx_ring, (void *)mbufs_dst,
- MAX_PKT_BURST, NULL);
- }
-
- if ((int32_t) nb_dq <= 0)
- return;
- if (copy_mode == COPY_MODE_IOAT_NUM)
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)mbufs_src, nb_dq);
+ /* Dequeue the mbufs from rx_to_tx_ring. */
+ nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+ (void *)mbufs, MAX_PKT_BURST, NULL);
+ if (nb_dq == 0)
+ continue;
/* Update macs if enabled */
if (mac_updating) {
for (j = 0; j < nb_dq; j++)
- update_mac_addrs(mbufs_dst[j],
+ update_mac_addrs(mbufs[j],
tx_config->rxtx_port);
}
- const uint16_t nb_tx = rte_eth_tx_burst(
- tx_config->rxtx_port, 0,
- (void *)mbufs_dst, nb_dq);
+ nb_tx = rte_eth_tx_burst(tx_config->rxtx_port, 0,
+ (void *)mbufs, nb_dq);
port_statistics.tx[tx_config->rxtx_port] += nb_tx;
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&mbufs_dst[nb_tx],
- nb_dq - nb_tx);
+ (void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
/* >8 End of transmitting packets from IOAT. */
@@ -853,9 +872,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, nb_queues, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device:"
@@ -979,7 +995,8 @@ main(int argc, char **argv)
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
- 4 * MAX_PKT_BURST) + rte_lcore_count() * MEMPOOL_CACHE_SIZE),
+ 4 * MAX_PKT_BURST + ring_size) + ring_size +
+ rte_lcore_count() * MEMPOOL_CACHE_SIZE),
MIN_POOL_SIZE);
/* Create the mbuf pool */
@@ -1011,8 +1028,8 @@ main(int argc, char **argv)
if (copy_mode == COPY_MODE_IOAT_NUM)
assign_rawdevs();
- else /* copy_mode == COPY_MODE_SW_NUM */
- assign_rings();
+
+ assign_rings();
/* >8 End of assigning each port resources. */
start_forwarding_cores();
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 2/6] examples/ioat: add cmd-line option to control DMA batch size
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
` (7 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 40 ++++++++++++++++++++++++++++++++--------
1 file changed, 32 insertions(+), 8 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 617c8c3dfb..19d5116465 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -24,6 +24,7 @@
#define CMD_LINE_OPT_NB_QUEUE "nb-queue"
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
+#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -102,6 +103,8 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
+static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -374,15 +377,25 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
static inline uint32_t
ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
- uint32_t num, uint16_t dev_id)
+ uint32_t num, uint32_t step, uint16_t dev_id)
{
- uint32_t n;
+ uint32_t i, k, m, n;
+
+ k = 0;
+ for (i = 0; i < num; i += m) {
+
+ m = RTE_MIN(step, num - i);
+ n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ k += n;
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
- n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
- if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ /* don't try to enqueue more if HW queue is full */
+ if (n != m)
+ break;
+ }
- return n;
+ return k;
}
static inline uint32_t
@@ -439,7 +452,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -590,6 +603,7 @@ static void
ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -b --dma-batch-size: number of requests per DMA batch\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -631,9 +645,10 @@ static int
ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
+ "b:" /* dma batch size */
+ "c:" /* copy type (sw|hw) */
"p:" /* portmask */
"q:" /* number of RX queues per port */
- "c:" /* copy type (sw|hw) */
"s:" /* ring size */
;
@@ -644,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_NB_QUEUE, required_argument, NULL, 'q'},
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
+ {CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{NULL, 0, 0, 0}
};
@@ -660,6 +676,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
lgopts, &option_index)) != EOF) {
switch (opt) {
+ case 'b':
+ ioat_batch_sz = atoi(optarg);
+ if (ioat_batch_sz > MAX_PKT_BURST) {
+ printf("Invalid dma batch size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 3/6] examples/ioat: add cmd line option to control max frame size
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
` (6 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 19d5116465..4cbcee6ac2 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -25,6 +25,7 @@
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
+#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -104,6 +105,7 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -604,6 +606,7 @@ ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
+ " -f --max-frame-size: max frame size\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -647,6 +650,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
static const char short_options[] =
"b:" /* dma batch size */
"c:" /* copy type (sw|hw) */
+ "f:" /* max frame size */
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
@@ -660,6 +664,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
+ {CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
{NULL, 0, 0, 0}
};
@@ -684,6 +689,15 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
return -1;
}
break;
+ case 'f':
+ max_frame_size = atoi(optarg);
+ if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
+ printf("Invalid max frame size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
+
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
@@ -880,6 +894,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
struct rte_eth_dev_info dev_info;
int ret, i;
+ if (max_frame_size > local_port_conf.rxmode.max_rx_pkt_len) {
+ local_port_conf.rxmode.max_rx_pkt_len = max_frame_size;
+ local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+
/* Skip ports that are not enabled */
if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@@ -995,6 +1014,7 @@ main(int argc, char **argv)
uint16_t nb_ports, portid;
uint32_t i;
unsigned int nb_mbufs;
+ size_t sz;
/* Init EAL. 8< */
ret = rte_eal_init(argc, argv);
@@ -1024,9 +1044,10 @@ main(int argc, char **argv)
MIN_POOL_SIZE);
/* Create the mbuf pool */
+ sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
+ sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
- MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
+ MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
if (ioat_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 4/6] examples/ioat: port application to dmadev APIs
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (2 preceding siblings ...)
2021-09-10 17:27 ` [dpdk-dev] [PATCH 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
` (5 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
examples/ioat/ioatfwd.c | 240 +++++++++++++++++---------------------
examples/ioat/meson.build | 8 +-
2 files changed, 106 insertions(+), 142 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 4cbcee6ac2..610cb1a5cb 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019-2021 Intel Corporation
*/
#include <stdint.h>
@@ -10,11 +10,10 @@
#include <rte_malloc.h>
#include <rte_ethdev.h>
-#include <rte_rawdev.h>
-#include <rte_ioat_rawdev.h>
+#include <rte_dmadev.h>
/* size of ring used for software copying between rx and tx. */
-#define RTE_LOGTYPE_IOAT RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_DMA RTE_LOGTYPE_USER1
#define MAX_PKT_BURST 32
#define MEMPOOL_CACHE_SIZE 512
#define MIN_POOL_SIZE 65536U
@@ -40,8 +39,8 @@ struct rxtx_port_config {
uint16_t nb_queues;
/* for software copy mode */
struct rte_ring *rx_to_tx_ring;
- /* for IOAT rawdev copy mode */
- uint16_t ioat_ids[MAX_RX_QUEUES_COUNT];
+ /* for dmadev HW copy mode */
+ uint16_t dmadev_ids[MAX_RX_QUEUES_COUNT];
};
/* Configuring ports and number of assigned lcores in struct. 8< */
@@ -60,13 +59,13 @@ struct ioat_port_statistics {
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
struct ioat_port_statistics port_statistics;
-
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
uint64_t total_packets_rx;
- uint64_t total_successful_enqueues;
- uint64_t total_failed_enqueues;
+ uint64_t total_submitted;
+ uint64_t total_completed;
+ uint64_t total_failed;
};
typedef enum copy_mode_t {
@@ -95,6 +94,17 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
*/
static unsigned short ring_size = 2048;
+/* global mbuf arrays for tracking DMA bufs */
+#define MBUF_RING_SIZE 1024
+#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
+#define MAX_DEVS 64 /* 64 is max number of DSA WQ's */
+struct dma_bufs {
+ struct rte_mbuf *bufs[MBUF_RING_SIZE];
+ struct rte_mbuf *copies[MBUF_RING_SIZE];
+ uint16_t sent;
+};
+static struct dma_bufs dma_bufs[MAX_DEVS];
+
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -131,36 +141,32 @@ print_port_stats(uint16_t port_id)
/* Print out statistics for one IOAT rawdev device. */
static void
-print_rawdev_stats(uint32_t dev_id, uint64_t *xstats,
- unsigned int *ids_xstats, uint16_t nb_xstats,
- struct rte_rawdev_xstats_name *names_xstats)
+print_dmadev_stats(uint32_t dev_id, struct rte_dmadev_stats stats)
{
- uint16_t i;
-
- printf("\nIOAT channel %u", dev_id);
- for (i = 0; i < nb_xstats; i++)
- printf("\n\t %s: %*"PRIu64,
- names_xstats[ids_xstats[i]].name,
- (int)(37 - strlen(names_xstats[ids_xstats[i]].name)),
- xstats[i]);
+ printf("\nDMA channel %u", dev_id);
+ printf("\n\t Total submitted ops: %lu", stats.submitted);
+ printf("\n\t Total completed ops: %lu", stats.completed);
+ printf("\n\t Total failed ops: %lu", stats.errors);
}
static void
print_total_stats(struct total_statistics *ts)
{
printf("\nAggregate statistics ==============================="
- "\nTotal packets Tx: %24"PRIu64" [pps]"
- "\nTotal packets Rx: %24"PRIu64" [pps]"
- "\nTotal packets dropped: %19"PRIu64" [pps]",
+ "\nTotal packets Tx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets Rx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets dropped: %17"PRIu64" [pkt/s]",
ts->total_packets_tx,
ts->total_packets_rx,
ts->total_packets_dropped);
if (copy_mode == COPY_MODE_IOAT_NUM) {
- printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
- "\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues,
- ts->total_failed_enqueues);
+ printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
+ "\nTotal completed ops: %19"PRIu64" [ops/s]"
+ "\nTotal failed ops: %22"PRIu64" [ops/s]",
+ ts->total_submitted,
+ ts->total_completed,
+ ts->total_failed);
}
printf("\n====================================================\n");
@@ -171,13 +177,10 @@ static void
print_stats(char *prgname)
{
struct total_statistics ts, delta_ts;
+ struct rte_dmadev_stats stats = {0};
uint32_t i, port_id, dev_id;
- struct rte_rawdev_xstats_name *names_xstats;
- uint64_t *xstats;
- unsigned int *ids_xstats, nb_xstats;
char status_string[255]; /* to print at the top of the output */
int status_strlen;
- int ret;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -203,48 +206,6 @@ print_stats(char *prgname)
sizeof(status_string) - status_strlen,
"Ring Size = %d", ring_size);
- /* Allocate memory for xstats names and values */
- ret = rte_rawdev_xstats_names_get(
- cfg.ports[0].ioat_ids[0], NULL, 0);
- if (ret < 0)
- return;
- nb_xstats = (unsigned int)ret;
-
- names_xstats = malloc(sizeof(*names_xstats) * nb_xstats);
- if (names_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat names memory\n");
- }
- rte_rawdev_xstats_names_get(cfg.ports[0].ioat_ids[0],
- names_xstats, nb_xstats);
-
- ids_xstats = malloc(sizeof(*ids_xstats) * 2);
- if (ids_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat ids_xstats memory\n");
- }
-
- xstats = malloc(sizeof(*xstats) * 2);
- if (xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat memory\n");
- }
-
- /* Get failed/successful enqueues stats index */
- ids_xstats[0] = ids_xstats[1] = nb_xstats;
- for (i = 0; i < nb_xstats; i++) {
- if (!strcmp(names_xstats[i].name, "failed_enqueues"))
- ids_xstats[0] = i;
- else if (!strcmp(names_xstats[i].name, "successful_enqueues"))
- ids_xstats[1] = i;
- if (ids_xstats[0] < nb_xstats && ids_xstats[1] < nb_xstats)
- break;
- }
- if (ids_xstats[0] == nb_xstats || ids_xstats[1] == nb_xstats) {
- rte_exit(EXIT_FAILURE,
- "Error getting failed/successful enqueues stats index\n");
- }
-
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
@@ -276,17 +237,13 @@ print_stats(char *prgname)
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- dev_id = cfg.ports[i].ioat_ids[j];
- rte_rawdev_xstats_get(dev_id,
- ids_xstats, xstats, 2);
-
- print_rawdev_stats(dev_id, xstats,
- ids_xstats, 2, names_xstats);
+ dev_id = cfg.ports[i].dmadev_ids[j];
+ rte_dmadev_stats_get(dev_id, 0, &stats);
+ print_dmadev_stats(dev_id, stats);
- delta_ts.total_failed_enqueues +=
- xstats[ids_xstats[0]];
- delta_ts.total_successful_enqueues +=
- xstats[ids_xstats[1]];
+ delta_ts.total_submitted += stats.submitted;
+ delta_ts.total_completed += stats.completed;
+ delta_ts.total_failed += stats.errors;
}
}
}
@@ -294,9 +251,9 @@ print_stats(char *prgname)
delta_ts.total_packets_tx -= ts.total_packets_tx;
delta_ts.total_packets_rx -= ts.total_packets_rx;
delta_ts.total_packets_dropped -= ts.total_packets_dropped;
- delta_ts.total_failed_enqueues -= ts.total_failed_enqueues;
- delta_ts.total_successful_enqueues -=
- ts.total_successful_enqueues;
+ delta_ts.total_submitted -= ts.total_submitted;
+ delta_ts.total_completed -= ts.total_completed;
+ delta_ts.total_failed -= ts.total_failed;
printf("\n");
print_total_stats(&delta_ts);
@@ -306,14 +263,10 @@ print_stats(char *prgname)
ts.total_packets_tx += delta_ts.total_packets_tx;
ts.total_packets_rx += delta_ts.total_packets_rx;
ts.total_packets_dropped += delta_ts.total_packets_dropped;
- ts.total_failed_enqueues += delta_ts.total_failed_enqueues;
- ts.total_successful_enqueues +=
- delta_ts.total_successful_enqueues;
+ ts.total_submitted += delta_ts.total_submitted;
+ ts.total_completed += delta_ts.total_completed;
+ ts.total_failed += delta_ts.total_failed;
}
-
- free(names_xstats);
- free(xstats);
- free(ids_xstats);
}
static void
@@ -357,20 +310,22 @@ static uint32_t
ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
+ struct dma_bufs *dma = &dma_bufs[dev_id];
int ret;
uint32_t i;
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
- ret = rte_ioat_enqueue_copy(dev_id,
+ ret = rte_dmadev_copy(dev_id, 0,
rte_pktmbuf_iova(pkts[i]),
rte_pktmbuf_iova(pkts_copy[i]),
- rte_pktmbuf_data_len(pkts[i]),
- (uintptr_t)pkts[i],
- (uintptr_t)pkts_copy[i]);
+ rte_pktmbuf_data_len(pkts[i]), 0);
- if (ret != 1)
+ if (ret < 0)
break;
+
+ dma->bufs[ret & MBUF_RING_MASK] = pkts[i];
+ dma->copies[ret & MBUF_RING_MASK] = pkts_copy[i];
}
ret = i;
@@ -390,7 +345,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ rte_dmadev_submit(dev_id, 0);
/* don't try to enqueue more if HW queue is full */
if (n != m)
@@ -404,20 +359,27 @@ static inline uint32_t
ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
- int32_t rc;
+ struct dma_bufs *dma = &dma_bufs[dev_id];
+ uint16_t nb_dq, filled;
/* Dequeue the mbufs from IOAT device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
- rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
- (void *)src, (void *)dst);
- if (rc < 0) {
- RTE_LOG(CRIT, IOAT,
- "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
- dev_id, rte_errno);
- rc = 0;
+ nb_dq = rte_dmadev_completed(dev_id, 0, num, NULL, NULL);
+
+ /* Return early if no work to do */
+ if (unlikely(nb_dq == 0))
+ return nb_dq;
+
+ /* Populate pkts_copy with the copies bufs from dma->copies */
+ for (filled = 0; filled < nb_dq; filled++) {
+ src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
+ dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
}
- return rc;
+ dma->sent += nb_dq;
+
+ return filled;
+
}
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
@@ -454,7 +416,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -469,7 +431,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* get completed copies */
nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
- MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
@@ -536,7 +498,7 @@ rx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main rx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -551,7 +513,7 @@ tx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main tx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main tx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -566,7 +528,7 @@ rxtx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx and tx loop for copy on"
+ RTE_LOG(INFO, DMA, "Entering main rx and tx loop for copy on"
" lcore %u\n", rte_lcore_id());
while (!force_quit)
@@ -581,7 +543,7 @@ static void start_forwarding_cores(void)
{
uint32_t lcore_id = rte_lcore_id();
- RTE_LOG(INFO, IOAT, "Entering %s on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering %s on lcore %u\n",
__func__, rte_lcore_id());
if (cfg.nb_lcores == 1) {
@@ -794,20 +756,28 @@ check_link_status(uint32_t port_mask)
static void
configure_rawdev_queue(uint32_t dev_id)
{
- struct rte_ioat_rawdev_config dev_config = {
- .ring_size = ring_size,
- .no_prefetch_completions = (cfg.nb_lcores > 1),
+ struct rte_dmadev_info info;
+ struct rte_dmadev_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dmadev_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ .nb_desc = ring_size
};
- struct rte_rawdev_info info = { .dev_private = &dev_config };
+ uint16_t vchan = 0;
- if (rte_rawdev_configure(dev_id, &info, sizeof(dev_config)) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_configure()\n");
+ if (rte_dmadev_configure(dev_id, &dev_config) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dmadev_configure()\n");
+
+ if (rte_dmadev_vchan_setup(dev_id, vchan, &qconf) != 0) {
+ printf("Error with queue configuration\n");
+ rte_panic();
}
- if (rte_rawdev_start(dev_id) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_start()\n");
+ rte_dmadev_info_get(dev_id, &info);
+ if (info.nb_vchans != 1) {
+ printf("Error, no configured queues reported on device id %u\n", dev_id);
+ rte_panic();
}
+ if (rte_dmadev_start(dev_id) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dmadev_start()\n");
}
/* >8 End of configuration of device. */
@@ -820,18 +790,16 @@ assign_rawdevs(void)
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- struct rte_rawdev_info rdev_info = { 0 };
+ struct rte_dmadev_info dmadev_info = { 0 };
do {
- if (rdev_id == rte_rawdev_count())
+ if (rdev_id == rte_dmadev_count())
goto end;
- rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
- } while (rdev_info.driver_name == NULL ||
- strcmp(rdev_info.driver_name,
- IOAT_PMD_RAWDEV_NAME_STR) != 0);
+ rte_dmadev_info_get(rdev_id++, &dmadev_info);
+ } while (dmadev_info.device->driver->name == NULL);
- cfg.ports[i].ioat_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
+ configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
++nb_rawdev;
}
}
@@ -840,7 +808,7 @@ assign_rawdevs(void)
rte_exit(EXIT_FAILURE,
"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+ RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
}
/* >8 End of using IOAT rawdev API functions. */
@@ -1089,15 +1057,15 @@ main(int argc, char **argv)
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
if (ret != 0)
- RTE_LOG(ERR, IOAT, "rte_eth_dev_stop: err=%s, port=%u\n",
+ RTE_LOG(ERR, DMA, "rte_eth_dev_stop: err=%s, port=%u\n",
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
printf("Stopping rawdev %d\n",
- cfg.ports[i].ioat_ids[j]);
- rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j]);
+ rte_dmadev_stop(cfg.ports[i].dmadev_ids[j]);
}
} else /* copy_mode == COPY_MODE_SW_NUM */
rte_ring_free(cfg.ports[i].rx_to_tx_ring);
diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build
index 68bce1ab03..c1dd7c9b29 100644
--- a/examples/ioat/meson.build
+++ b/examples/ioat/meson.build
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
+# Copyright(c) 2019-2021 Intel Corporation
# meson file, for building this example as part of a main DPDK build.
#
@@ -7,12 +7,8 @@
# DPDK instance, use 'make'
allow_experimental_apis = true
-build = dpdk_conf.has('RTE_RAW_IOAT')
-if not build
- subdir_done()
-endif
-deps += ['raw_ioat']
+deps += ['dmadev']
sources = files(
'ioatfwd.c',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 5/6] examples/ioat: update naming to match change to dmadev
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (3 preceding siblings ...)
2021-09-10 17:27 ` [dpdk-dev] [PATCH 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
` (4 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
examples/ioat/ioatfwd.c | 187 ++++++++++++++++++++--------------------
1 file changed, 93 insertions(+), 94 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 610cb1a5cb..93f9f629a8 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -52,13 +52,13 @@ struct rxtx_transmission_config {
/* >8 End of configuration of ports and number of assigned lcores. */
/* per-port statistics struct */
-struct ioat_port_statistics {
+struct dma_port_statistics {
uint64_t rx[RTE_MAX_ETHPORTS];
uint64_t tx[RTE_MAX_ETHPORTS];
uint64_t tx_dropped[RTE_MAX_ETHPORTS];
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
-struct ioat_port_statistics port_statistics;
+struct dma_port_statistics port_statistics;
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
@@ -71,14 +71,14 @@ struct total_statistics {
typedef enum copy_mode_t {
#define COPY_MODE_SW "sw"
COPY_MODE_SW_NUM,
-#define COPY_MODE_IOAT "hw"
- COPY_MODE_IOAT_NUM,
+#define COPY_MODE_DMA "hw"
+ COPY_MODE_DMA_NUM,
COPY_MODE_INVALID_NUM,
COPY_MODE_SIZE_NUM = COPY_MODE_INVALID_NUM
} copy_mode_t;
/* mask of enabled ports */
-static uint32_t ioat_enabled_port_mask;
+static uint32_t dma_enabled_port_mask;
/* number of RX queues per port */
static uint16_t nb_queues = 1;
@@ -87,9 +87,9 @@ static uint16_t nb_queues = 1;
static int mac_updating = 1;
/* hardare copy mode enabled by default. */
-static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
+static copy_mode_t copy_mode = COPY_MODE_DMA_NUM;
-/* size of IOAT rawdev ring for hardware copy mode or
+/* size of descriptor ring for hardware copy mode or
* rte_ring for software copy mode
*/
static unsigned short ring_size = 2048;
@@ -97,7 +97,7 @@ static unsigned short ring_size = 2048;
/* global mbuf arrays for tracking DMA bufs */
#define MBUF_RING_SIZE 1024
#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
-#define MAX_DEVS 64 /* 64 is max number of DSA WQ's */
+#define MAX_DEVS 64
struct dma_bufs {
struct rte_mbuf *bufs[MBUF_RING_SIZE];
struct rte_mbuf *copies[MBUF_RING_SIZE];
@@ -114,14 +114,14 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
-static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t dma_batch_sz = MAX_PKT_BURST;
static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
-static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr dma_ports_eth_addr[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
-struct rte_mempool *ioat_pktmbuf_pool;
+struct rte_mempool *dma_pktmbuf_pool;
/* Print out statistics for one port. */
static void
@@ -139,7 +139,7 @@ print_port_stats(uint16_t port_id)
port_statistics.copy_dropped[port_id]);
}
-/* Print out statistics for one IOAT rawdev device. */
+/* Print out statistics for one dmadev device. */
static void
print_dmadev_stats(uint32_t dev_id, struct rte_dmadev_stats stats)
{
@@ -160,7 +160,7 @@ print_total_stats(struct total_statistics *ts)
ts->total_packets_rx,
ts->total_packets_dropped);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
"\nTotal completed ops: %19"PRIu64" [ops/s]"
"\nTotal failed ops: %22"PRIu64" [ops/s]",
@@ -194,7 +194,7 @@ print_stats(char *prgname)
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Copy Mode = %s,\n", copy_mode == COPY_MODE_SW_NUM ?
- COPY_MODE_SW : COPY_MODE_IOAT);
+ COPY_MODE_SW : COPY_MODE_DMA);
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Updating MAC = %s, ", mac_updating ?
@@ -233,7 +233,7 @@ print_stats(char *prgname)
delta_ts.total_packets_rx +=
port_statistics.rx[port_id];
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
@@ -284,7 +284,7 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
/* src addr */
- rte_ether_addr_copy(&ioat_ports_eth_addr[dest_portid], ð->s_addr);
+ rte_ether_addr_copy(&dma_ports_eth_addr[dest_portid], ð->s_addr);
}
/* Perform packet copy there is a user-defined function. 8< */
@@ -307,7 +307,7 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
@@ -333,7 +333,7 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t num, uint32_t step, uint16_t dev_id)
{
uint32_t i, k, m, n;
@@ -342,7 +342,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
for (i = 0; i < num; i += m) {
m = RTE_MIN(step, num - i);
- n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ n = dma_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
rte_dmadev_submit(dev_id, 0);
@@ -356,12 +356,12 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+dma_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
uint16_t nb_dq, filled;
- /* Dequeue the mbufs from IOAT device. Since all memory
+ /* Dequeue the mbufs from DMA device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
@@ -371,7 +371,7 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
if (unlikely(nb_dq == 0))
return nb_dq;
- /* Populate pkts_copy with the copies bufs from dma->copies */
+ /* Populate pkts_copy with the copies bufs from dma->copies for tx */
for (filled = 0; filled < nb_dq; filled++) {
src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
@@ -382,9 +382,9 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
}
-/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
+/* Receive packets on one port and enqueue to dmadev or rte_ring. 8< */
static void
-ioat_rx_port(struct rxtx_port_config *rx_config)
+dma_rx_port(struct rxtx_port_config *rx_config)
{
int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
@@ -401,7 +401,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ ret = rte_mempool_get_bulk(dma_pktmbuf_pool,
(void *)pkts_burst_copy, nb_rx);
if (unlikely(ret < 0))
@@ -412,17 +412,16 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pktmbuf_metadata_copy(pkts_burst[j],
pkts_burst_copy[j]);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
-
+ if (copy_mode == COPY_MODE_DMA_NUM) {
/* enqueue packets for hardware copy */
- nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
+ nb_enq = dma_enqueue(pkts_burst, pkts_burst_copy,
+ nb_rx, dma_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst[nb_enq],
nb_rx - nb_enq);
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -430,7 +429,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
/* get completed copies */
- nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ nb_rx = dma_dequeue(pkts_burst, pkts_burst_copy,
MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
@@ -439,14 +438,14 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pkts_burst_copy[j]);
}
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)pkts_burst, nb_rx);
nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
(void *)pkts_burst_copy, nb_rx, NULL);
/* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -454,11 +453,11 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
}
}
-/* >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
+/* >8 End of receive packets on one port and enqueue to dmadev or rte_ring. */
-/* Transmit packets from IOAT rawdev/rte_ring for one port. 8< */
+/* Transmit packets from dmadev/rte_ring for one port. 8< */
static void
-ioat_tx_port(struct rxtx_port_config *tx_config)
+dma_tx_port(struct rxtx_port_config *tx_config)
{
uint32_t i, j, nb_dq, nb_tx;
struct rte_mbuf *mbufs[MAX_PKT_BURST];
@@ -485,13 +484,13 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
-/* >8 End of transmitting packets from IOAT. */
+/* >8 End of transmitting packets from dmadev. */
-/* Main rx processing loop for IOAT rawdev. */
+/* Main rx processing loop for dmadev. */
static void
rx_main_loop(void)
{
@@ -503,7 +502,7 @@ rx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_rx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
}
/* Main tx processing loop for hardware copy. */
@@ -518,7 +517,7 @@ tx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_tx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
/* Main rx and tx loop if only one worker lcore available */
@@ -533,8 +532,8 @@ rxtx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++) {
- ioat_rx_port(&cfg.ports[i]);
- ioat_tx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
}
@@ -564,7 +563,7 @@ static void start_forwarding_cores(void)
/* Display usage */
static void
-ioat_usage(const char *prgname)
+dma_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
@@ -576,12 +575,12 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+ " -s --ring-size RS: size of dmadev descriptor ring for hardware copy mode or rte_ring for software copy mode\n",
prgname);
}
static int
-ioat_parse_portmask(const char *portmask)
+dma_parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
@@ -595,19 +594,19 @@ ioat_parse_portmask(const char *portmask)
}
static copy_mode_t
-ioat_parse_copy_mode(const char *copy_mode)
+dma_parse_copy_mode(const char *copy_mode)
{
if (strcmp(copy_mode, COPY_MODE_SW) == 0)
return COPY_MODE_SW_NUM;
- else if (strcmp(copy_mode, COPY_MODE_IOAT) == 0)
- return COPY_MODE_IOAT_NUM;
+ else if (strcmp(copy_mode, COPY_MODE_DMA) == 0)
+ return COPY_MODE_DMA_NUM;
return COPY_MODE_INVALID_NUM;
}
/* Parse the argument given in the command line of the application */
static int
-ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
+dma_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
"b:" /* dma batch size */
@@ -636,7 +635,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
int option_index;
char *prgname = argv[0];
- ioat_enabled_port_mask = default_port_mask;
+ dma_enabled_port_mask = default_port_mask;
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, short_options,
@@ -644,10 +643,10 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
switch (opt) {
case 'b':
- ioat_batch_sz = atoi(optarg);
- if (ioat_batch_sz > MAX_PKT_BURST) {
+ dma_batch_sz = atoi(optarg);
+ if (dma_batch_sz > MAX_PKT_BURST) {
printf("Invalid dma batch size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -655,19 +654,19 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
max_frame_size = atoi(optarg);
if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
printf("Invalid max frame size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
/* portmask */
case 'p':
- ioat_enabled_port_mask = ioat_parse_portmask(optarg);
- if (ioat_enabled_port_mask & ~default_port_mask ||
- ioat_enabled_port_mask <= 0) {
+ dma_enabled_port_mask = dma_parse_portmask(optarg);
+ if (dma_enabled_port_mask & ~default_port_mask ||
+ dma_enabled_port_mask <= 0) {
printf("Invalid portmask, %s, suggest 0x%x\n",
optarg, default_port_mask);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -677,16 +676,16 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
if (nb_queues == 0 || nb_queues > MAX_RX_QUEUES_COUNT) {
printf("Invalid RX queues number %s. Max %u\n",
optarg, MAX_RX_QUEUES_COUNT);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
case 'c':
- copy_mode = ioat_parse_copy_mode(optarg);
+ copy_mode = dma_parse_copy_mode(optarg);
if (copy_mode == COPY_MODE_INVALID_NUM) {
printf("Invalid copy type. Use: sw, hw\n");
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -695,7 +694,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ring_size = atoi(optarg);
if (ring_size == 0) {
printf("Invalid ring size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -705,7 +704,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
break;
default:
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
}
@@ -754,7 +753,7 @@ check_link_status(uint32_t port_mask)
/* Configuration of device. 8< */
static void
-configure_rawdev_queue(uint32_t dev_id)
+configure_dmadev_queue(uint32_t dev_id)
{
struct rte_dmadev_info info;
struct rte_dmadev_conf dev_config = { .nb_vchans = 1 };
@@ -781,11 +780,11 @@ configure_rawdev_queue(uint32_t dev_id)
}
/* >8 End of configuration of device. */
-/* Using IOAT rawdev API functions. 8< */
+/* Using dmadev API functions. 8< */
static void
-assign_rawdevs(void)
+assign_dmadevs(void)
{
- uint16_t nb_rawdev = 0, rdev_id = 0;
+ uint16_t nb_dmadev = 0, rdev_id = 0;
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
@@ -799,18 +798,18 @@ assign_rawdevs(void)
} while (dmadev_info.device->driver->name == NULL);
cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
- ++nb_rawdev;
+ configure_dmadev_queue(cfg.ports[i].dmadev_ids[j]);
+ ++nb_dmadev;
}
}
end:
- if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+ if (nb_dmadev < cfg.nb_ports * cfg.ports[0].nb_queues)
rte_exit(EXIT_FAILURE,
- "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
- nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
+ "Not enough dmadevs (%u) for all queues (%u).\n",
+ nb_dmadev, cfg.nb_ports * cfg.ports[0].nb_queues);
+ RTE_LOG(INFO, DMA, "Number of used dmadevs: %u.\n", nb_dmadev);
}
-/* >8 End of using IOAT rawdev API functions. */
+/* >8 End of using dmadev API functions. */
/* Assign ring structures for packet exchanging. 8< */
static void
@@ -868,7 +867,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
}
/* Skip ports that are not enabled */
- if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
+ if ((dma_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
return;
}
@@ -895,7 +894,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ioat_ports_eth_addr[portid]);
+ rte_eth_macaddr_get(portid, &dma_ports_eth_addr[portid]);
/* Init RX queues */
rxq_conf = dev_info.default_rxconf;
@@ -954,12 +953,12 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
portid,
- ioat_ports_eth_addr[portid].addr_bytes[0],
- ioat_ports_eth_addr[portid].addr_bytes[1],
- ioat_ports_eth_addr[portid].addr_bytes[2],
- ioat_ports_eth_addr[portid].addr_bytes[3],
- ioat_ports_eth_addr[portid].addr_bytes[4],
- ioat_ports_eth_addr[portid].addr_bytes[5]);
+ dma_ports_eth_addr[portid].addr_bytes[0],
+ dma_ports_eth_addr[portid].addr_bytes[1],
+ dma_ports_eth_addr[portid].addr_bytes[2],
+ dma_ports_eth_addr[portid].addr_bytes[3],
+ dma_ports_eth_addr[portid].addr_bytes[4],
+ dma_ports_eth_addr[portid].addr_bytes[5]);
cfg.ports[cfg.nb_ports].rxtx_port = portid;
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
@@ -1001,9 +1000,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* Parse application arguments (after the EAL ones) */
- ret = ioat_parse_args(argc, argv, nb_ports);
+ ret = dma_parse_args(argc, argv, nb_ports);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid IOAT arguments\n");
+ rte_exit(EXIT_FAILURE, "Invalid DMA arguments\n");
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
@@ -1014,23 +1013,23 @@ main(int argc, char **argv)
/* Create the mbuf pool */
sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
- ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ dma_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
- if (ioat_pktmbuf_pool == NULL)
+ if (dma_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
/* Initialize each port. 8< */
cfg.nb_ports = 0;
RTE_ETH_FOREACH_DEV(portid)
- port_init(portid, ioat_pktmbuf_pool, nb_queues);
+ port_init(portid, dma_pktmbuf_pool, nb_queues);
/* >8 End of initializing each port. */
/* Initialize port xstats */
memset(&port_statistics, 0, sizeof(port_statistics));
/* Assigning each port resources. 8< */
- while (!check_link_status(ioat_enabled_port_mask) && !force_quit)
+ while (!check_link_status(dma_enabled_port_mask) && !force_quit)
sleep(1);
/* Check if there is enough lcores for all ports. */
@@ -1039,8 +1038,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE,
"There should be at least one worker lcore.\n");
- if (copy_mode == COPY_MODE_IOAT_NUM)
- assign_rawdevs();
+ if (copy_mode == COPY_MODE_DMA_NUM)
+ assign_dmadevs();
assign_rings();
/* >8 End of assigning each port resources. */
@@ -1061,9 +1060,9 @@ main(int argc, char **argv)
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- printf("Stopping rawdev %d\n",
+ printf("Stopping dmadev %d\n",
cfg.ports[i].dmadev_ids[j]);
rte_dmadev_stop(cfg.ports[i].dmadev_ids[j]);
}
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH 6/6] examples/ioat: rename application to dmafwd
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (4 preceding siblings ...)
2021-09-10 17:27 ` [dpdk-dev] [PATCH 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-09-10 17:27 ` Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
` (3 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-10 17:27 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
.../sample_app_ug/{ioat.rst => dma.rst} | 114 +++++++++---------
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 0
examples/{ioat => dma}/meson.build | 2 +-
examples/meson.build | 2 +-
7 files changed, 66 insertions(+), 62 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (100%)
rename examples/{ioat => dma}/meson.build (94%)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/dma.rst
similarity index 73%
rename from doc/guides/sample_app_ug/ioat.rst
rename to doc/guides/sample_app_ug/dma.rst
index ee0a627b06..3246c780ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/dma.rst
@@ -1,17 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2019 Intel Corporation.
+ Copyright(c) 2019-2021 Intel Corporation.
.. include:: <isonum.txt>
-Packet copying using Intel\ |reg| QuickData Technology
-======================================================
+Packet copying using DMAdev library
+===================================
Overview
--------
This sample is intended as a demonstration of the basic components of a DPDK
-forwarding application and example of how to use IOAT driver API to make
-packets copies.
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
Also while forwarding, the MAC addresses are affected as follows:
@@ -29,7 +29,7 @@ Compiling the Application
To compile the sample application see :doc:`compiling`.
-The application is located in the ``ioat`` sub-directory.
+The application is located in the ``dma`` sub-directory.
Running the Application
@@ -38,32 +38,36 @@ Running the Application
In order to run the hardware copy application, the copying device
needs to be bound to user-space IO driver.
-Refer to the "IOAT Rawdev Driver" chapter in the "Rawdev Drivers" document
-for information on using the driver.
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
The application requires a number of command line options:
.. code-block:: console
- ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating]
+ ./<build_dir>/examples/dpdk-dma [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
+ [--[no-]mac-updating] [-f FS] [-b BS]
where,
* p MASK: A hexadecimal bitmask of the ports to configure (default is all)
-* q NQ: Number of Rx queues used per port equivalent to CBDMA channels
+* q NQ: Number of Rx queues used per port equivalent to DMA channels
per port (default is 1)
* c CT: Performed packet copy type: software (sw) or hardware using
DMA (hw) (default is hw)
-* s RS: Size of IOAT rawdev ring for hardware copy mode or rte_ring for
+* s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
software copy mode (default is 2048)
* --[no-]mac-updating: Whether MAC address of packets should be changed
or not (default is mac-updating)
+* f FS: set the max frame size
+
+* b BS: set the DMA batch size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
@@ -81,7 +85,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
To run the application in a Linux environment with 2 lcores (the main lcore,
plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -89,7 +93,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
Refer to the *DPDK Getting Started Guide* for general information on
running applications and the Environment Abstraction Layer (EAL) options.
@@ -114,7 +118,7 @@ The first task is to initialize the Environment Abstraction Layer (EAL).
The ``argc`` and ``argv`` arguments are provided to the ``rte_eal_init()``
function. The value returned is the number of parsed arguments:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Init EAL. 8<
:end-before: >8 End of init EAL.
@@ -124,7 +128,7 @@ function. The value returned is the number of parsed arguments:
The ``main()`` also allocates a mempool to hold the mbufs (Message Buffers)
used by the application:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Allocates mempool to hold the mbufs. 8<
:end-before: >8 End of allocates mempool to hold the mbufs.
@@ -135,7 +139,7 @@ detail in the "Mbuf Library" section of the *DPDK Programmer's Guide*.
The ``main()`` function also initializes the ports:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Initialize each port. 8<
:end-before: >8 End of initializing each port.
@@ -145,9 +149,9 @@ Each port is configured using ``port_init()`` function. The Ethernet
ports are configured with local settings using the ``rte_eth_dev_configure()``
function and the ``port_conf`` struct. The RSS is enabled so that
multiple Rx queues could be used for packet receiving and copying by
-multiple CBDMA channels per port:
+multiple DMA channels per port:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring port to use RSS for multiple RX queues. 8<
:end-before: >8 End of configuring port to use RSS for multiple RX queues.
@@ -159,7 +163,7 @@ and ``rte_eth_tx_queue_setup()`` functions.
The Ethernet port is then started:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start device. 8<
:end-before: >8 End of starting device.
@@ -168,7 +172,7 @@ The Ethernet port is then started:
Finally the Rx port is set in promiscuous mode:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: RX port is set in promiscuous mode. 8<
:end-before: >8 End of RX port is set in promiscuous mode.
@@ -177,7 +181,7 @@ Finally the Rx port is set in promiscuous mode:
After that each port application assigns resources needed.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assigning each port resources. 8<
:end-before: >8 End of assigning each port resources.
@@ -188,30 +192,30 @@ special structures are assigned to each port. If software copy was chosen,
application have to assign ring structures for packet exchanging between lcores
assigned to ports.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assign ring structures for packet exchanging. 8<
:end-before: >8 End of assigning ring structures for packet exchanging.
:dedent: 0
-When using hardware copy each Rx queue of the port is assigned an
-IOAT device (``assign_rawdevs()``) using IOAT Rawdev Driver API
-functions:
+When using hardware copy each Rx queue of the port is assigned a DMA device
+(``assign_dmadevs()``) using DMAdev library API functions:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Using IOAT rawdev API functions. 8<
- :end-before: >8 End of using IOAT rawdev API functions.
+ :start-after: Using dmadev API functions. 8<
+ :end-before: >8 End of using dmadev API functions.
:dedent: 0
-The initialization of hardware device is done by ``rte_rawdev_configure()``
-function using ``rte_rawdev_info`` struct. After configuration the device is
-started using ``rte_rawdev_start()`` function. Each of the above operations
-is done in ``configure_rawdev_queue()``.
+The initialization of hardware device is done by ``rte_dmadev_configure()`` and
+``rte_dmadev_vchan_setup()`` functions using the ``rte_dmadev_conf`` and
+``rte_dmadev_vchan_conf`` structs. After configuration the device is started
+using ``rte_dmadev_start()`` function. Each of the above operations is done in
+``configure_dmadev_queue()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuration of device. 8<
:end-before: >8 End of configuration of device.
@@ -233,7 +237,7 @@ The Lcores Launching Functions
As described above, ``main()`` function invokes ``start_forwarding_cores()``
function in order to start processing for each lcore:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start processing for each lcore. 8<
:end-before: >8 End of starting to processfor each lcore.
@@ -244,7 +248,7 @@ using ``rte_eal_remote_launch()``. The configured ports, their number
and number of assigned lcores are stored in user-defined
``rxtx_transmission_config`` struct:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring ports and number of assigned lcores in struct. 8<
:end-before: >8 End of configuration of ports and number of assigned lcores.
@@ -256,24 +260,24 @@ corresponding to ports and lcores configuration provided by the user.
The Lcores Processing Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For receiving packets on each port, the ``ioat_rx_port()`` function is used.
+For receiving packets on each port, the ``dma_rx_port()`` function is used.
The function receives packets on each configured Rx queue. Depending on the
-mode the user chose, it will enqueue packets to IOAT rawdev channels and
+mode the user chose, it will enqueue packets to DMA channels and
then invoke copy process (hardware copy), or perform software copy of each
packet using ``pktmbuf_sw_copy()`` function and enqueue them to an rte_ring:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
The packets are received in burst mode using ``rte_eth_rx_burst()``
function. When using hardware copy mode the packets are enqueued in
-copying device's buffer using ``ioat_enqueue_packets()`` which calls
-``rte_ioat_enqueue_copy()``. When all received packets are in the
-buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
-Function ``rte_ioat_enqueue_copy()`` operates on physical address of
+copying device's buffer using ``dma_enqueue_packets()`` which calls
+``rte_dmadev_copy()``. When all received packets are in the
+buffer the copy operations are started by calling ``rte_dmadev_submit()``.
+Function ``rte_dmadev_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
start of the data buffer (``buf_iova``). Thus the address is adjusted
by ``addr_offset`` value in order to get the address of ``rearm_data``
@@ -282,25 +286,25 @@ be copied in a single operation. This method can be used because the mbufs
are direct mbufs allocated by the apps. If another app uses external buffers,
or indirect mbufs, then multiple copy operations must be used.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
-All completed copies are processed by ``ioat_tx_port()`` function. When using
-hardware copy mode the function invokes ``rte_ioat_completed_ops()``
-on each assigned IOAT channel to gather copied packets. If software copy
+All completed copies are processed by ``dma_tx_port()`` function. When using
+hardware copy mode the function invokes ``rte_dma_completed()``
+on each assigned DMA channel to gather copied packets. If software copy
mode is used the function dequeues copied packets from the rte_ring. Then each
packet MAC address is changed if it was enabled. After that copies are sent
in burst mode using `` rte_eth_tx_burst()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Transmit packets from IOAT rawdev/rte_ring for one port. 8<
- :end-before: >8 End of transmitting packets from IOAT.
+ :start-after: Transmit packets from dmadev/rte_ring for one port. 8<
+ :end-before: >8 End of transmitting packets from dmadev.
:dedent: 0
The Packet Copying Functions
@@ -312,7 +316,7 @@ metadata from source packet to new mbuf, and then copying a data
chunk of source packet. Both memory copies are done using
``rte_memcpy()``:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Perform packet copy there is a user-defined function. 8<
:end-before: >8 End of perform packet copy there is a user-defined function.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index e8db83d3a7..8835dd03ac 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -22,7 +22,7 @@ Sample Applications User Guides
ip_reassembly
kernel_nic_interface
keep_alive
- ioat
+ dma
l2_forward_crypto
l2_forward_job_stats
l2_forward_real_virtual
diff --git a/doc/guides/sample_app_ug/intro.rst b/doc/guides/sample_app_ug/intro.rst
index 8ff223b16c..e765f1fd6b 100644
--- a/doc/guides/sample_app_ug/intro.rst
+++ b/doc/guides/sample_app_ug/intro.rst
@@ -58,8 +58,8 @@ examples are highlighted below.
forwarding Graph, or ``l3fwd_graph`` application does forwarding based on IPv4
like a simple router with DPDK Graph framework.
-* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
- or ``ioatfwd`` application demonstrates how to use IOAT rawdev driver for
+* :doc:`Hardware packet copying<dma>`: The Hardware packet copying,
+ or ``dmafwd`` application demonstrates how to use DMAdev library for
copying packets between two threads.
* :doc:`Packet Distributor<dist_app>`: The Packet Distributor
diff --git a/examples/ioat/Makefile b/examples/dma/Makefile
similarity index 97%
rename from examples/ioat/Makefile
rename to examples/dma/Makefile
index 178fc8778c..59af6478b7 100644
--- a/examples/ioat/Makefile
+++ b/examples/dma/Makefile
@@ -2,10 +2,10 @@
# Copyright(c) 2019 Intel Corporation
# binary name
-APP = ioatfwd
+APP = dmafwd
# all source are stored in SRCS-y
-SRCS-y := ioatfwd.c
+SRCS-y := dmafwd.c
PKGCONF ?= pkg-config
diff --git a/examples/ioat/ioatfwd.c b/examples/dma/dmafwd.c
similarity index 100%
rename from examples/ioat/ioatfwd.c
rename to examples/dma/dmafwd.c
diff --git a/examples/ioat/meson.build b/examples/dma/meson.build
similarity index 94%
rename from examples/ioat/meson.build
rename to examples/dma/meson.build
index c1dd7c9b29..9fdcad660e 100644
--- a/examples/ioat/meson.build
+++ b/examples/dma/meson.build
@@ -11,5 +11,5 @@ allow_experimental_apis = true
deps += ['dmadev']
sources = files(
- 'ioatfwd.c',
+ 'dmafwd.c',
)
diff --git a/examples/meson.build b/examples/meson.build
index 07e682401b..d50f09db12 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -12,13 +12,13 @@ all_examples = [
'bond',
'cmdline',
'distributor',
+ 'dma',
'ethtool',
'eventdev_pipeline',
'fips_validation',
'flow_classify',
'flow_filtering',
'helloworld',
- 'ioat',
'ip_fragmentation',
'ip_pipeline',
'ip_reassembly',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (5 preceding siblings ...)
2021-09-10 17:27 ` [dpdk-dev] [PATCH 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
` (6 more replies)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (2 subsequent siblings)
9 siblings, 7 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
This patchset first adds some additional command line options to the
existing ioatfwd application to enhance usability.
The last 3 patches of this set then port the ioatfwd application to use the
dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
all variables etc are renamed to be more appropriate for using with the
DMAdev library. Lastly, the application itself is renamed to "dmafwd".
Depends-on: series-18960 ("support dmadev")
Kevin Laatz (3):
examples/ioat: port application to dmadev APIs
examples/ioat: update naming to match change to dmadev
examples/ioat: rename application to dmafwd
Konstantin Ananyev (3):
examples/ioat: always use same lcore for both DMA requests enqueue and
dequeue
examples/ioat: add cmd-line option to control DMA batch size
examples/ioat: add cmd line option to control max frame size
MAINTAINERS | 7 +-
.../sample_app_ug/{ioat.rst => dma.rst} | 114 ++--
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 586 +++++++++---------
examples/{ioat => dma}/meson.build | 10 +-
examples/meson.build | 2 +-
8 files changed, 380 insertions(+), 349 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (63%)
rename examples/{ioat => dma}/meson.build (63%)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
` (5 subsequent siblings)
6 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 185 ++++++++++++++++++++++------------------
1 file changed, 101 insertions(+), 84 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index b3977a8be5..1498343492 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
/* Perform packet copy there is a user-defined function. 8< */
static inline void
-pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
{
- /* Copy packet metadata */
- rte_memcpy(&dst->rearm_data,
- &src->rearm_data,
- offsetof(struct rte_mbuf, cacheline1)
- - offsetof(struct rte_mbuf, rearm_data));
+ dst->data_off = src->data_off;
+ memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
+ offsetof(struct rte_mbuf, buf_len) -
+ offsetof(struct rte_mbuf, rx_descriptor_fields1));
+}
- /* Copy packet data */
+/* Copy packet data */
+static inline void
+pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+{
rte_memcpy(rte_pktmbuf_mtod(dst, char *),
rte_pktmbuf_mtod(src, char *), src->data_len);
}
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf **pkts,
+ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
int ret;
uint32_t i;
- struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
-
- const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
- &pkts[0]->rearm_data);
-
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_copy, nb_rx);
-
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
ret = rte_ioat_enqueue_copy(dev_id,
- pkts[i]->buf_iova - addr_offset,
- pkts_copy[i]->buf_iova - addr_offset,
- rte_pktmbuf_data_len(pkts[i]) + addr_offset,
+ rte_pktmbuf_iova(pkts[i]),
+ rte_pktmbuf_iova(pkts_copy[i]),
+ rte_pktmbuf_data_len(pkts[i]),
(uintptr_t)pkts[i],
(uintptr_t)pkts_copy[i]);
@@ -376,20 +369,50 @@ ioat_enqueue_packets(struct rte_mbuf **pkts,
}
ret = i;
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
- nb_rx - i);
-
return ret;
}
+static inline uint32_t
+ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+ uint32_t num, uint16_t dev_id)
+{
+ uint32_t n;
+
+ n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
+
+ return n;
+}
+
+static inline uint32_t
+ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+ uint16_t dev_id)
+{
+ int32_t rc;
+ /* Dequeue the mbufs from IOAT device. Since all memory
+ * is DPDK pinned memory and therefore all addresses should
+ * be valid, we don't check for copy errors
+ */
+ rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
+ (void *)src, (void *)dst);
+ if (rc < 0) {
+ RTE_LOG(CRIT, IOAT,
+ "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
+ dev_id, rte_errno);
+ rc = 0;
+ }
+ return rc;
+}
+
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
static void
ioat_rx_port(struct rxtx_port_config *rx_config)
{
+ int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
for (i = 0; i < rx_config->nb_queues; i++) {
@@ -401,40 +424,54 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
+ ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst_copy, nb_rx);
+
+ if (unlikely(ret < 0))
+ rte_exit(EXIT_FAILURE,
+ "Unable to allocate memory.\n");
+
+ for (j = 0; j < nb_rx; j++)
+ pktmbuf_metadata_copy(pkts_burst[j],
+ pkts_burst_copy[j]);
+
if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Perform packet hardware copy */
- nb_enq = ioat_enqueue_packets(pkts_burst,
+
+ /* enqueue packets for hardware copy */
+ nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
nb_rx, rx_config->ioat_ids[i]);
- if (nb_enq > 0)
- rte_ioat_perform_ops(rx_config->ioat_ids[i]);
- } else {
- /* Perform packet software copy, free source packets */
- int ret;
- struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst_copy, nb_rx);
+ /* free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst[nb_enq],
+ nb_rx - nb_enq);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE,
- "Unable to allocate memory.\n");
+ port_statistics.copy_dropped[rx_config->rxtx_port] +=
+ (nb_rx - nb_enq);
+ /* get completed copies */
+ nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ } else {
+ /* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
pktmbuf_sw_copy(pkts_burst[j],
pkts_burst_copy[j]);
+ }
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst, nb_rx);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst, nb_rx);
- nb_enq = rte_ring_enqueue_burst(
- rx_config->rx_to_tx_ring,
- (void *)pkts_burst_copy, nb_rx, NULL);
+ nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
+ (void *)pkts_burst_copy, nb_rx, NULL);
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&pkts_burst_copy[nb_enq],
- nb_rx - nb_enq);
- }
+ /* Free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
port_statistics.copy_dropped[rx_config->rxtx_port] +=
(nb_rx - nb_enq);
@@ -446,51 +483,33 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
static void
ioat_tx_port(struct rxtx_port_config *tx_config)
{
- uint32_t i, j, nb_dq = 0;
- struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
- struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
+ uint32_t i, j, nb_dq, nb_tx;
+ struct rte_mbuf *mbufs[MAX_PKT_BURST];
for (i = 0; i < tx_config->nb_queues; i++) {
- if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Dequeue the mbufs from IOAT device. Since all memory
- * is DPDK pinned memory and therefore all addresses should
- * be valid, we don't check for copy errors
- */
- nb_dq = rte_ioat_completed_ops(
- tx_config->ioat_ids[i], MAX_PKT_BURST, NULL, NULL,
- (void *)mbufs_src, (void *)mbufs_dst);
- } else {
- /* Dequeue the mbufs from rx_to_tx_ring. */
- nb_dq = rte_ring_dequeue_burst(
- tx_config->rx_to_tx_ring, (void *)mbufs_dst,
- MAX_PKT_BURST, NULL);
- }
-
- if ((int32_t) nb_dq <= 0)
- return;
- if (copy_mode == COPY_MODE_IOAT_NUM)
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)mbufs_src, nb_dq);
+ /* Dequeue the mbufs from rx_to_tx_ring. */
+ nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+ (void *)mbufs, MAX_PKT_BURST, NULL);
+ if (nb_dq == 0)
+ continue;
/* Update macs if enabled */
if (mac_updating) {
for (j = 0; j < nb_dq; j++)
- update_mac_addrs(mbufs_dst[j],
+ update_mac_addrs(mbufs[j],
tx_config->rxtx_port);
}
- const uint16_t nb_tx = rte_eth_tx_burst(
- tx_config->rxtx_port, 0,
- (void *)mbufs_dst, nb_dq);
+ nb_tx = rte_eth_tx_burst(tx_config->rxtx_port, 0,
+ (void *)mbufs, nb_dq);
port_statistics.tx[tx_config->rxtx_port] += nb_tx;
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&mbufs_dst[nb_tx],
- nb_dq - nb_tx);
+ (void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
/* >8 End of transmitting packets from IOAT. */
@@ -853,9 +872,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, nb_queues, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device:"
@@ -974,7 +990,8 @@ main(int argc, char **argv)
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
- 4 * MAX_PKT_BURST) + rte_lcore_count() * MEMPOOL_CACHE_SIZE),
+ 4 * MAX_PKT_BURST + ring_size) + ring_size +
+ rte_lcore_count() * MEMPOOL_CACHE_SIZE),
MIN_POOL_SIZE);
/* Create the mbuf pool */
@@ -1006,8 +1023,8 @@ main(int argc, char **argv)
if (copy_mode == COPY_MODE_IOAT_NUM)
assign_rawdevs();
- else /* copy_mode == COPY_MODE_SW_NUM */
- assign_rings();
+
+ assign_rings();
/* >8 End of assigning each port resources. */
start_forwarding_cores();
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
` (4 subsequent siblings)
6 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 40 ++++++++++++++++++++++++++++++++--------
1 file changed, 32 insertions(+), 8 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 1498343492..4d132a87e5 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -24,6 +24,7 @@
#define CMD_LINE_OPT_NB_QUEUE "nb-queue"
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
+#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -102,6 +103,8 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
+static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -374,15 +377,25 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
static inline uint32_t
ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
- uint32_t num, uint16_t dev_id)
+ uint32_t num, uint32_t step, uint16_t dev_id)
{
- uint32_t n;
+ uint32_t i, k, m, n;
+
+ k = 0;
+ for (i = 0; i < num; i += m) {
+
+ m = RTE_MIN(step, num - i);
+ n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ k += n;
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
- n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
- if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ /* don't try to enqueue more if HW queue is full */
+ if (n != m)
+ break;
+ }
- return n;
+ return k;
}
static inline uint32_t
@@ -439,7 +452,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -590,6 +603,7 @@ static void
ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -b --dma-batch-size: number of requests per DMA batch\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -631,9 +645,10 @@ static int
ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
+ "b:" /* dma batch size */
+ "c:" /* copy type (sw|hw) */
"p:" /* portmask */
"q:" /* number of RX queues per port */
- "c:" /* copy type (sw|hw) */
"s:" /* ring size */
;
@@ -644,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_NB_QUEUE, required_argument, NULL, 'q'},
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
+ {CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{NULL, 0, 0, 0}
};
@@ -660,6 +676,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
lgopts, &option_index)) != EOF) {
switch (opt) {
+ case 'b':
+ ioat_batch_sz = atoi(optarg);
+ if (ioat_batch_sz > MAX_PKT_BURST) {
+ printf("Invalid dma batch size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
` (3 subsequent siblings)
6 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ioat/ioatfwd.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 4d132a87e5..1711827cea 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -25,6 +25,7 @@
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
+#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -104,6 +105,7 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -604,6 +606,7 @@ ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
+ " -f --max-frame-size: max frame size\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -647,6 +650,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
static const char short_options[] =
"b:" /* dma batch size */
"c:" /* copy type (sw|hw) */
+ "f:" /* max frame size */
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
@@ -660,6 +664,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
+ {CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
{NULL, 0, 0, 0}
};
@@ -684,6 +689,15 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
return -1;
}
break;
+ case 'f':
+ max_frame_size = atoi(optarg);
+ if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
+ printf("Invalid max frame size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
+
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
@@ -880,6 +894,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
struct rte_eth_dev_info dev_info;
int ret, i;
+ if (max_frame_size > local_port_conf.rxmode.max_rx_pkt_len) {
+ local_port_conf.rxmode.max_rx_pkt_len = max_frame_size;
+ local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+
/* Skip ports that are not enabled */
if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@@ -990,6 +1009,7 @@ main(int argc, char **argv)
uint16_t nb_ports, portid;
uint32_t i;
unsigned int nb_mbufs;
+ size_t sz;
/* Init EAL. 8< */
ret = rte_eal_init(argc, argv);
@@ -1019,9 +1039,10 @@ main(int argc, char **argv)
MIN_POOL_SIZE);
/* Create the mbuf pool */
+ sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
+ sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
- MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
+ MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
if (ioat_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
` (2 preceding siblings ...)
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-24 4:00 ` fengchengwen
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
` (2 subsequent siblings)
6 siblings, 2 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
v2:
- dmadev api name updates following rebase
- use rte_config macro for max devs
- use PRIu64 for printing stats
---
examples/ioat/ioatfwd.c | 239 ++++++++++++++++----------------------
examples/ioat/meson.build | 8 +-
2 files changed, 105 insertions(+), 142 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 1711827cea..df6a28f9e5 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019-2021 Intel Corporation
*/
#include <stdint.h>
@@ -10,11 +10,10 @@
#include <rte_malloc.h>
#include <rte_ethdev.h>
-#include <rte_rawdev.h>
-#include <rte_ioat_rawdev.h>
+#include <rte_dmadev.h>
/* size of ring used for software copying between rx and tx. */
-#define RTE_LOGTYPE_IOAT RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_DMA RTE_LOGTYPE_USER1
#define MAX_PKT_BURST 32
#define MEMPOOL_CACHE_SIZE 512
#define MIN_POOL_SIZE 65536U
@@ -40,8 +39,8 @@ struct rxtx_port_config {
uint16_t nb_queues;
/* for software copy mode */
struct rte_ring *rx_to_tx_ring;
- /* for IOAT rawdev copy mode */
- uint16_t ioat_ids[MAX_RX_QUEUES_COUNT];
+ /* for dmadev HW copy mode */
+ uint16_t dmadev_ids[MAX_RX_QUEUES_COUNT];
};
/* Configuring ports and number of assigned lcores in struct. 8< */
@@ -60,13 +59,13 @@ struct ioat_port_statistics {
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
struct ioat_port_statistics port_statistics;
-
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
uint64_t total_packets_rx;
- uint64_t total_successful_enqueues;
- uint64_t total_failed_enqueues;
+ uint64_t total_submitted;
+ uint64_t total_completed;
+ uint64_t total_failed;
};
typedef enum copy_mode_t {
@@ -95,6 +94,16 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
*/
static unsigned short ring_size = 2048;
+/* global mbuf arrays for tracking DMA bufs */
+#define MBUF_RING_SIZE 1024
+#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
+struct dma_bufs {
+ struct rte_mbuf *bufs[MBUF_RING_SIZE];
+ struct rte_mbuf *copies[MBUF_RING_SIZE];
+ uint16_t sent;
+};
+static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX_DEVS];
+
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -131,36 +140,32 @@ print_port_stats(uint16_t port_id)
/* Print out statistics for one IOAT rawdev device. */
static void
-print_rawdev_stats(uint32_t dev_id, uint64_t *xstats,
- unsigned int *ids_xstats, uint16_t nb_xstats,
- struct rte_rawdev_xstats_name *names_xstats)
+print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
- uint16_t i;
-
- printf("\nIOAT channel %u", dev_id);
- for (i = 0; i < nb_xstats; i++)
- printf("\n\t %s: %*"PRIu64,
- names_xstats[ids_xstats[i]].name,
- (int)(37 - strlen(names_xstats[ids_xstats[i]].name)),
- xstats[i]);
+ printf("\nDMA channel %u", dev_id);
+ printf("\n\t Total submitted ops: %"PRIu64"", stats.submitted);
+ printf("\n\t Total completed ops: %"PRIu64"", stats.completed);
+ printf("\n\t Total failed ops: %"PRIu64"", stats.errors);
}
static void
print_total_stats(struct total_statistics *ts)
{
printf("\nAggregate statistics ==============================="
- "\nTotal packets Tx: %24"PRIu64" [pps]"
- "\nTotal packets Rx: %24"PRIu64" [pps]"
- "\nTotal packets dropped: %19"PRIu64" [pps]",
+ "\nTotal packets Tx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets Rx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets dropped: %17"PRIu64" [pkt/s]",
ts->total_packets_tx,
ts->total_packets_rx,
ts->total_packets_dropped);
if (copy_mode == COPY_MODE_IOAT_NUM) {
- printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
- "\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues,
- ts->total_failed_enqueues);
+ printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
+ "\nTotal completed ops: %19"PRIu64" [ops/s]"
+ "\nTotal failed ops: %22"PRIu64" [ops/s]",
+ ts->total_submitted,
+ ts->total_completed,
+ ts->total_failed);
}
printf("\n====================================================\n");
@@ -171,13 +176,10 @@ static void
print_stats(char *prgname)
{
struct total_statistics ts, delta_ts;
+ struct rte_dma_stats stats = {0};
uint32_t i, port_id, dev_id;
- struct rte_rawdev_xstats_name *names_xstats;
- uint64_t *xstats;
- unsigned int *ids_xstats, nb_xstats;
char status_string[255]; /* to print at the top of the output */
int status_strlen;
- int ret;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -203,48 +205,6 @@ print_stats(char *prgname)
sizeof(status_string) - status_strlen,
"Ring Size = %d", ring_size);
- /* Allocate memory for xstats names and values */
- ret = rte_rawdev_xstats_names_get(
- cfg.ports[0].ioat_ids[0], NULL, 0);
- if (ret < 0)
- return;
- nb_xstats = (unsigned int)ret;
-
- names_xstats = malloc(sizeof(*names_xstats) * nb_xstats);
- if (names_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat names memory\n");
- }
- rte_rawdev_xstats_names_get(cfg.ports[0].ioat_ids[0],
- names_xstats, nb_xstats);
-
- ids_xstats = malloc(sizeof(*ids_xstats) * 2);
- if (ids_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat ids_xstats memory\n");
- }
-
- xstats = malloc(sizeof(*xstats) * 2);
- if (xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat memory\n");
- }
-
- /* Get failed/successful enqueues stats index */
- ids_xstats[0] = ids_xstats[1] = nb_xstats;
- for (i = 0; i < nb_xstats; i++) {
- if (!strcmp(names_xstats[i].name, "failed_enqueues"))
- ids_xstats[0] = i;
- else if (!strcmp(names_xstats[i].name, "successful_enqueues"))
- ids_xstats[1] = i;
- if (ids_xstats[0] < nb_xstats && ids_xstats[1] < nb_xstats)
- break;
- }
- if (ids_xstats[0] == nb_xstats || ids_xstats[1] == nb_xstats) {
- rte_exit(EXIT_FAILURE,
- "Error getting failed/successful enqueues stats index\n");
- }
-
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
@@ -276,17 +236,13 @@ print_stats(char *prgname)
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- dev_id = cfg.ports[i].ioat_ids[j];
- rte_rawdev_xstats_get(dev_id,
- ids_xstats, xstats, 2);
-
- print_rawdev_stats(dev_id, xstats,
- ids_xstats, 2, names_xstats);
+ dev_id = cfg.ports[i].dmadev_ids[j];
+ rte_dma_stats_get(dev_id, 0, &stats);
+ print_dmadev_stats(dev_id, stats);
- delta_ts.total_failed_enqueues +=
- xstats[ids_xstats[0]];
- delta_ts.total_successful_enqueues +=
- xstats[ids_xstats[1]];
+ delta_ts.total_submitted += stats.submitted;
+ delta_ts.total_completed += stats.completed;
+ delta_ts.total_failed += stats.errors;
}
}
}
@@ -294,9 +250,9 @@ print_stats(char *prgname)
delta_ts.total_packets_tx -= ts.total_packets_tx;
delta_ts.total_packets_rx -= ts.total_packets_rx;
delta_ts.total_packets_dropped -= ts.total_packets_dropped;
- delta_ts.total_failed_enqueues -= ts.total_failed_enqueues;
- delta_ts.total_successful_enqueues -=
- ts.total_successful_enqueues;
+ delta_ts.total_submitted -= ts.total_submitted;
+ delta_ts.total_completed -= ts.total_completed;
+ delta_ts.total_failed -= ts.total_failed;
printf("\n");
print_total_stats(&delta_ts);
@@ -306,14 +262,10 @@ print_stats(char *prgname)
ts.total_packets_tx += delta_ts.total_packets_tx;
ts.total_packets_rx += delta_ts.total_packets_rx;
ts.total_packets_dropped += delta_ts.total_packets_dropped;
- ts.total_failed_enqueues += delta_ts.total_failed_enqueues;
- ts.total_successful_enqueues +=
- delta_ts.total_successful_enqueues;
+ ts.total_submitted += delta_ts.total_submitted;
+ ts.total_completed += delta_ts.total_completed;
+ ts.total_failed += delta_ts.total_failed;
}
-
- free(names_xstats);
- free(xstats);
- free(ids_xstats);
}
static void
@@ -357,20 +309,22 @@ static uint32_t
ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
+ struct dma_bufs *dma = &dma_bufs[dev_id];
int ret;
uint32_t i;
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
- ret = rte_ioat_enqueue_copy(dev_id,
+ ret = rte_dma_copy(dev_id, 0,
rte_pktmbuf_iova(pkts[i]),
rte_pktmbuf_iova(pkts_copy[i]),
- rte_pktmbuf_data_len(pkts[i]),
- (uintptr_t)pkts[i],
- (uintptr_t)pkts_copy[i]);
+ rte_pktmbuf_data_len(pkts[i]), 0);
- if (ret != 1)
+ if (ret < 0)
break;
+
+ dma->bufs[ret & MBUF_RING_MASK] = pkts[i];
+ dma->copies[ret & MBUF_RING_MASK] = pkts_copy[i];
}
ret = i;
@@ -390,7 +344,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ rte_dma_submit(dev_id, 0);
/* don't try to enqueue more if HW queue is full */
if (n != m)
@@ -404,20 +358,27 @@ static inline uint32_t
ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
- int32_t rc;
+ struct dma_bufs *dma = &dma_bufs[dev_id];
+ uint16_t nb_dq, filled;
/* Dequeue the mbufs from IOAT device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
- rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
- (void *)src, (void *)dst);
- if (rc < 0) {
- RTE_LOG(CRIT, IOAT,
- "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
- dev_id, rte_errno);
- rc = 0;
+ nb_dq = rte_dma_completed(dev_id, 0, num, NULL, NULL);
+
+ /* Return early if no work to do */
+ if (unlikely(nb_dq == 0))
+ return nb_dq;
+
+ /* Populate pkts_copy with the copies bufs from dma->copies */
+ for (filled = 0; filled < nb_dq; filled++) {
+ src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
+ dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
}
- return rc;
+ dma->sent += nb_dq;
+
+ return filled;
+
}
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
@@ -454,7 +415,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -469,7 +430,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* get completed copies */
nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
- MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
@@ -536,7 +497,7 @@ rx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main rx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -551,7 +512,7 @@ tx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main tx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main tx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -566,7 +527,7 @@ rxtx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx and tx loop for copy on"
+ RTE_LOG(INFO, DMA, "Entering main rx and tx loop for copy on"
" lcore %u\n", rte_lcore_id());
while (!force_quit)
@@ -581,7 +542,7 @@ static void start_forwarding_cores(void)
{
uint32_t lcore_id = rte_lcore_id();
- RTE_LOG(INFO, IOAT, "Entering %s on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering %s on lcore %u\n",
__func__, rte_lcore_id());
if (cfg.nb_lcores == 1) {
@@ -794,20 +755,28 @@ check_link_status(uint32_t port_mask)
static void
configure_rawdev_queue(uint32_t dev_id)
{
- struct rte_ioat_rawdev_config dev_config = {
- .ring_size = ring_size,
- .no_prefetch_completions = (cfg.nb_lcores > 1),
+ struct rte_dma_info info;
+ struct rte_dma_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dma_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ .nb_desc = ring_size
};
- struct rte_rawdev_info info = { .dev_private = &dev_config };
+ uint16_t vchan = 0;
- if (rte_rawdev_configure(dev_id, &info, sizeof(dev_config)) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_configure()\n");
+ if (rte_dma_configure(dev_id, &dev_config) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_configure()\n");
+
+ if (rte_dma_vchan_setup(dev_id, vchan, &qconf) != 0) {
+ printf("Error with queue configuration\n");
+ rte_panic();
}
- if (rte_rawdev_start(dev_id) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_start()\n");
+ rte_dma_info_get(dev_id, &info);
+ if (info.nb_vchans != 1) {
+ printf("Error, no configured queues reported on device id %u\n", dev_id);
+ rte_panic();
}
+ if (rte_dma_start(dev_id) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_start()\n");
}
/* >8 End of configuration of device. */
@@ -820,18 +789,16 @@ assign_rawdevs(void)
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- struct rte_rawdev_info rdev_info = { 0 };
+ struct rte_dma_info dmadev_info = { 0 };
do {
- if (rdev_id == rte_rawdev_count())
+ if (rdev_id == rte_dma_count_avail())
goto end;
- rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
- } while (rdev_info.driver_name == NULL ||
- strcmp(rdev_info.driver_name,
- IOAT_PMD_RAWDEV_NAME_STR) != 0);
+ rte_dma_info_get(rdev_id++, &dmadev_info);
+ } while (!rte_dma_is_valid(rdev_id));
- cfg.ports[i].ioat_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
+ configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
++nb_rawdev;
}
}
@@ -840,7 +807,7 @@ assign_rawdevs(void)
rte_exit(EXIT_FAILURE,
"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+ RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
}
/* >8 End of using IOAT rawdev API functions. */
@@ -1084,15 +1051,15 @@ main(int argc, char **argv)
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
if (ret != 0)
- RTE_LOG(ERR, IOAT, "rte_eth_dev_stop: err=%s, port=%u\n",
+ RTE_LOG(ERR, DMA, "rte_eth_dev_stop: err=%s, port=%u\n",
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
printf("Stopping rawdev %d\n",
- cfg.ports[i].ioat_ids[j]);
- rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j]);
+ rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
} else /* copy_mode == COPY_MODE_SW_NUM */
rte_ring_free(cfg.ports[i].rx_to_tx_ring);
diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build
index 68bce1ab03..c1dd7c9b29 100644
--- a/examples/ioat/meson.build
+++ b/examples/ioat/meson.build
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
+# Copyright(c) 2019-2021 Intel Corporation
# meson file, for building this example as part of a main DPDK build.
#
@@ -7,12 +7,8 @@
# DPDK instance, use 'make'
allow_experimental_apis = true
-build = dpdk_conf.has('RTE_RAW_IOAT')
-if not build
- subdir_done()
-endif
-deps += ['raw_ioat']
+deps += ['dmadev']
sources = files(
'ioatfwd.c',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
` (3 preceding siblings ...)
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
2021-09-23 13:53 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev fengchengwen
6 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
examples/ioat/ioatfwd.c | 175 ++++++++++++++++++++--------------------
1 file changed, 87 insertions(+), 88 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index df6a28f9e5..d4bff58633 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -52,13 +52,13 @@ struct rxtx_transmission_config {
/* >8 End of configuration of ports and number of assigned lcores. */
/* per-port statistics struct */
-struct ioat_port_statistics {
+struct dma_port_statistics {
uint64_t rx[RTE_MAX_ETHPORTS];
uint64_t tx[RTE_MAX_ETHPORTS];
uint64_t tx_dropped[RTE_MAX_ETHPORTS];
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
-struct ioat_port_statistics port_statistics;
+struct dma_port_statistics port_statistics;
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
@@ -71,14 +71,14 @@ struct total_statistics {
typedef enum copy_mode_t {
#define COPY_MODE_SW "sw"
COPY_MODE_SW_NUM,
-#define COPY_MODE_IOAT "hw"
- COPY_MODE_IOAT_NUM,
+#define COPY_MODE_DMA "hw"
+ COPY_MODE_DMA_NUM,
COPY_MODE_INVALID_NUM,
COPY_MODE_SIZE_NUM = COPY_MODE_INVALID_NUM
} copy_mode_t;
/* mask of enabled ports */
-static uint32_t ioat_enabled_port_mask;
+static uint32_t dma_enabled_port_mask;
/* number of RX queues per port */
static uint16_t nb_queues = 1;
@@ -87,9 +87,9 @@ static uint16_t nb_queues = 1;
static int mac_updating = 1;
/* hardare copy mode enabled by default. */
-static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
+static copy_mode_t copy_mode = COPY_MODE_DMA_NUM;
-/* size of IOAT rawdev ring for hardware copy mode or
+/* size of descriptor ring for hardware copy mode or
* rte_ring for software copy mode
*/
static unsigned short ring_size = 2048;
@@ -113,14 +113,14 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
-static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t dma_batch_sz = MAX_PKT_BURST;
static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
-static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr dma_ports_eth_addr[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
-struct rte_mempool *ioat_pktmbuf_pool;
+struct rte_mempool *dma_pktmbuf_pool;
/* Print out statistics for one port. */
static void
@@ -138,7 +138,7 @@ print_port_stats(uint16_t port_id)
port_statistics.copy_dropped[port_id]);
}
-/* Print out statistics for one IOAT rawdev device. */
+/* Print out statistics for one dmadev device. */
static void
print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
@@ -159,7 +159,7 @@ print_total_stats(struct total_statistics *ts)
ts->total_packets_rx,
ts->total_packets_dropped);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
"\nTotal completed ops: %19"PRIu64" [ops/s]"
"\nTotal failed ops: %22"PRIu64" [ops/s]",
@@ -193,7 +193,7 @@ print_stats(char *prgname)
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Copy Mode = %s,\n", copy_mode == COPY_MODE_SW_NUM ?
- COPY_MODE_SW : COPY_MODE_IOAT);
+ COPY_MODE_SW : COPY_MODE_DMA);
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Updating MAC = %s, ", mac_updating ?
@@ -232,7 +232,7 @@ print_stats(char *prgname)
delta_ts.total_packets_rx +=
port_statistics.rx[port_id];
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
@@ -283,7 +283,7 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
/* src addr */
- rte_ether_addr_copy(&ioat_ports_eth_addr[dest_portid], ð->s_addr);
+ rte_ether_addr_copy(&dma_ports_eth_addr[dest_portid], ð->s_addr);
}
/* Perform packet copy there is a user-defined function. 8< */
@@ -306,7 +306,7 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
@@ -332,7 +332,7 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t num, uint32_t step, uint16_t dev_id)
{
uint32_t i, k, m, n;
@@ -341,7 +341,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
for (i = 0; i < num; i += m) {
m = RTE_MIN(step, num - i);
- n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ n = dma_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
rte_dma_submit(dev_id, 0);
@@ -355,12 +355,12 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+dma_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
uint16_t nb_dq, filled;
- /* Dequeue the mbufs from IOAT device. Since all memory
+ /* Dequeue the mbufs from DMA device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
@@ -370,7 +370,7 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
if (unlikely(nb_dq == 0))
return nb_dq;
- /* Populate pkts_copy with the copies bufs from dma->copies */
+ /* Populate pkts_copy with the copies bufs from dma->copies for tx */
for (filled = 0; filled < nb_dq; filled++) {
src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
@@ -381,9 +381,9 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
}
-/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
+/* Receive packets on one port and enqueue to dmadev or rte_ring. 8< */
static void
-ioat_rx_port(struct rxtx_port_config *rx_config)
+dma_rx_port(struct rxtx_port_config *rx_config)
{
int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
@@ -400,7 +400,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ ret = rte_mempool_get_bulk(dma_pktmbuf_pool,
(void *)pkts_burst_copy, nb_rx);
if (unlikely(ret < 0))
@@ -411,17 +411,16 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pktmbuf_metadata_copy(pkts_burst[j],
pkts_burst_copy[j]);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
-
+ if (copy_mode == COPY_MODE_DMA_NUM) {
/* enqueue packets for hardware copy */
- nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
+ nb_enq = dma_enqueue(pkts_burst, pkts_burst_copy,
+ nb_rx, dma_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst[nb_enq],
nb_rx - nb_enq);
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -429,7 +428,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
/* get completed copies */
- nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ nb_rx = dma_dequeue(pkts_burst, pkts_burst_copy,
MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
@@ -438,14 +437,14 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pkts_burst_copy[j]);
}
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)pkts_burst, nb_rx);
nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
(void *)pkts_burst_copy, nb_rx, NULL);
/* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -453,11 +452,11 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
}
}
-/* >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
+/* >8 End of receive packets on one port and enqueue to dmadev or rte_ring. */
-/* Transmit packets from IOAT rawdev/rte_ring for one port. 8< */
+/* Transmit packets from dmadev/rte_ring for one port. 8< */
static void
-ioat_tx_port(struct rxtx_port_config *tx_config)
+dma_tx_port(struct rxtx_port_config *tx_config)
{
uint32_t i, j, nb_dq, nb_tx;
struct rte_mbuf *mbufs[MAX_PKT_BURST];
@@ -484,13 +483,13 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
-/* >8 End of transmitting packets from IOAT. */
+/* >8 End of transmitting packets from dmadev. */
-/* Main rx processing loop for IOAT rawdev. */
+/* Main rx processing loop for dmadev. */
static void
rx_main_loop(void)
{
@@ -502,7 +501,7 @@ rx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_rx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
}
/* Main tx processing loop for hardware copy. */
@@ -517,7 +516,7 @@ tx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_tx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
/* Main rx and tx loop if only one worker lcore available */
@@ -532,8 +531,8 @@ rxtx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++) {
- ioat_rx_port(&cfg.ports[i]);
- ioat_tx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
}
@@ -563,7 +562,7 @@ static void start_forwarding_cores(void)
/* Display usage */
static void
-ioat_usage(const char *prgname)
+dma_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
@@ -575,12 +574,12 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+ " -s --ring-size RS: size of dmadev descriptor ring for hardware copy mode or rte_ring for software copy mode\n",
prgname);
}
static int
-ioat_parse_portmask(const char *portmask)
+dma_parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
@@ -594,19 +593,19 @@ ioat_parse_portmask(const char *portmask)
}
static copy_mode_t
-ioat_parse_copy_mode(const char *copy_mode)
+dma_parse_copy_mode(const char *copy_mode)
{
if (strcmp(copy_mode, COPY_MODE_SW) == 0)
return COPY_MODE_SW_NUM;
- else if (strcmp(copy_mode, COPY_MODE_IOAT) == 0)
- return COPY_MODE_IOAT_NUM;
+ else if (strcmp(copy_mode, COPY_MODE_DMA) == 0)
+ return COPY_MODE_DMA_NUM;
return COPY_MODE_INVALID_NUM;
}
/* Parse the argument given in the command line of the application */
static int
-ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
+dma_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
"b:" /* dma batch size */
@@ -635,7 +634,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
int option_index;
char *prgname = argv[0];
- ioat_enabled_port_mask = default_port_mask;
+ dma_enabled_port_mask = default_port_mask;
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, short_options,
@@ -643,10 +642,10 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
switch (opt) {
case 'b':
- ioat_batch_sz = atoi(optarg);
- if (ioat_batch_sz > MAX_PKT_BURST) {
+ dma_batch_sz = atoi(optarg);
+ if (dma_batch_sz > MAX_PKT_BURST) {
printf("Invalid dma batch size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -654,19 +653,19 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
max_frame_size = atoi(optarg);
if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
printf("Invalid max frame size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
/* portmask */
case 'p':
- ioat_enabled_port_mask = ioat_parse_portmask(optarg);
- if (ioat_enabled_port_mask & ~default_port_mask ||
- ioat_enabled_port_mask <= 0) {
+ dma_enabled_port_mask = dma_parse_portmask(optarg);
+ if (dma_enabled_port_mask & ~default_port_mask ||
+ dma_enabled_port_mask <= 0) {
printf("Invalid portmask, %s, suggest 0x%x\n",
optarg, default_port_mask);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -676,16 +675,16 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
if (nb_queues == 0 || nb_queues > MAX_RX_QUEUES_COUNT) {
printf("Invalid RX queues number %s. Max %u\n",
optarg, MAX_RX_QUEUES_COUNT);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
case 'c':
- copy_mode = ioat_parse_copy_mode(optarg);
+ copy_mode = dma_parse_copy_mode(optarg);
if (copy_mode == COPY_MODE_INVALID_NUM) {
printf("Invalid copy type. Use: sw, hw\n");
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -694,7 +693,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ring_size = atoi(optarg);
if (ring_size == 0) {
printf("Invalid ring size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -704,7 +703,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
break;
default:
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
}
@@ -753,7 +752,7 @@ check_link_status(uint32_t port_mask)
/* Configuration of device. 8< */
static void
-configure_rawdev_queue(uint32_t dev_id)
+configure_dmadev_queue(uint32_t dev_id)
{
struct rte_dma_info info;
struct rte_dma_conf dev_config = { .nb_vchans = 1 };
@@ -780,11 +779,11 @@ configure_rawdev_queue(uint32_t dev_id)
}
/* >8 End of configuration of device. */
-/* Using IOAT rawdev API functions. 8< */
+/* Using dmadev API functions. 8< */
static void
-assign_rawdevs(void)
+assign_dmadevs(void)
{
- uint16_t nb_rawdev = 0, rdev_id = 0;
+ uint16_t nb_dmadev = 0, rdev_id = 0;
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
@@ -798,18 +797,18 @@ assign_rawdevs(void)
} while (!rte_dma_is_valid(rdev_id));
cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
- ++nb_rawdev;
+ configure_dmadev_queue(cfg.ports[i].dmadev_ids[j]);
+ ++nb_dmadev;
}
}
end:
- if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+ if (nb_dmadev < cfg.nb_ports * cfg.ports[0].nb_queues)
rte_exit(EXIT_FAILURE,
- "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
- nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
+ "Not enough dmadevs (%u) for all queues (%u).\n",
+ nb_dmadev, cfg.nb_ports * cfg.ports[0].nb_queues);
+ RTE_LOG(INFO, DMA, "Number of used dmadevs: %u.\n", nb_dmadev);
}
-/* >8 End of using IOAT rawdev API functions. */
+/* >8 End of using dmadev API functions. */
/* Assign ring structures for packet exchanging. 8< */
static void
@@ -867,7 +866,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
}
/* Skip ports that are not enabled */
- if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
+ if ((dma_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
return;
}
@@ -894,7 +893,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ioat_ports_eth_addr[portid]);
+ rte_eth_macaddr_get(portid, &dma_ports_eth_addr[portid]);
/* Init RX queues */
rxq_conf = dev_info.default_rxconf;
@@ -953,7 +952,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
printf("Port %u, MAC address: " RTE_ETHER_ADDR_PRT_FMT "\n\n",
portid,
- RTE_ETHER_ADDR_BYTES(&ioat_ports_eth_addr[portid]));
+ RTE_ETHER_ADDR_BYTES(&dma_ports_eth_addr[portid]));
cfg.ports[cfg.nb_ports].rxtx_port = portid;
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
@@ -995,9 +994,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* Parse application arguments (after the EAL ones) */
- ret = ioat_parse_args(argc, argv, nb_ports);
+ ret = dma_parse_args(argc, argv, nb_ports);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid IOAT arguments\n");
+ rte_exit(EXIT_FAILURE, "Invalid DMA arguments\n");
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
@@ -1008,23 +1007,23 @@ main(int argc, char **argv)
/* Create the mbuf pool */
sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
- ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ dma_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
- if (ioat_pktmbuf_pool == NULL)
+ if (dma_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
/* Initialize each port. 8< */
cfg.nb_ports = 0;
RTE_ETH_FOREACH_DEV(portid)
- port_init(portid, ioat_pktmbuf_pool, nb_queues);
+ port_init(portid, dma_pktmbuf_pool, nb_queues);
/* >8 End of initializing each port. */
/* Initialize port xstats */
memset(&port_statistics, 0, sizeof(port_statistics));
/* Assigning each port resources. 8< */
- while (!check_link_status(ioat_enabled_port_mask) && !force_quit)
+ while (!check_link_status(dma_enabled_port_mask) && !force_quit)
sleep(1);
/* Check if there is enough lcores for all ports. */
@@ -1033,8 +1032,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE,
"There should be at least one worker lcore.\n");
- if (copy_mode == COPY_MODE_IOAT_NUM)
- assign_rawdevs();
+ if (copy_mode == COPY_MODE_DMA_NUM)
+ assign_dmadevs();
assign_rings();
/* >8 End of assigning each port resources. */
@@ -1055,9 +1054,9 @@ main(int argc, char **argv)
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- printf("Stopping rawdev %d\n",
+ printf("Stopping dmadev %d\n",
cfg.ports[i].dmadev_ids[j]);
rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
` (4 preceding siblings ...)
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-09-17 16:41 ` Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-23 13:53 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev fengchengwen
6 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-17 16:41 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
MAINTAINERS | 7 +-
.../sample_app_ug/{ioat.rst => dma.rst} | 114 +++++++++---------
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 0
examples/{ioat => dma}/meson.build | 2 +-
examples/meson.build | 2 +-
8 files changed, 71 insertions(+), 64 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (100%)
rename examples/{ioat => dma}/meson.build (94%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 70993d23e8..500fa94c58 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1326,8 +1326,6 @@ IOAT Rawdev
M: Bruce Richardson <bruce.richardson@intel.com>
F: drivers/raw/ioat/
F: doc/guides/rawdevs/ioat.rst
-F: examples/ioat/
-F: doc/guides/sample_app_ug/ioat.rst
NXP DPAA2 QDMA
M: Nipun Gupta <nipun.gupta@nxp.com>
@@ -1698,6 +1696,11 @@ F: doc/guides/tools/proc_info.rst
Other Example Applications
--------------------------
+DMAdev example
+M: Kevin Laatz <kevin.laatz@intel.com>
+F: examples/dma/
+F: doc/guides/sample_app_ug/dma.rst
+
Ethtool example
F: examples/ethtool/
F: doc/guides/sample_app_ug/ethtool.rst
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/dma.rst
similarity index 73%
rename from doc/guides/sample_app_ug/ioat.rst
rename to doc/guides/sample_app_ug/dma.rst
index ee0a627b06..3246c780ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/dma.rst
@@ -1,17 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2019 Intel Corporation.
+ Copyright(c) 2019-2021 Intel Corporation.
.. include:: <isonum.txt>
-Packet copying using Intel\ |reg| QuickData Technology
-======================================================
+Packet copying using DMAdev library
+===================================
Overview
--------
This sample is intended as a demonstration of the basic components of a DPDK
-forwarding application and example of how to use IOAT driver API to make
-packets copies.
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
Also while forwarding, the MAC addresses are affected as follows:
@@ -29,7 +29,7 @@ Compiling the Application
To compile the sample application see :doc:`compiling`.
-The application is located in the ``ioat`` sub-directory.
+The application is located in the ``dma`` sub-directory.
Running the Application
@@ -38,32 +38,36 @@ Running the Application
In order to run the hardware copy application, the copying device
needs to be bound to user-space IO driver.
-Refer to the "IOAT Rawdev Driver" chapter in the "Rawdev Drivers" document
-for information on using the driver.
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
The application requires a number of command line options:
.. code-block:: console
- ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating]
+ ./<build_dir>/examples/dpdk-dma [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
+ [--[no-]mac-updating] [-f FS] [-b BS]
where,
* p MASK: A hexadecimal bitmask of the ports to configure (default is all)
-* q NQ: Number of Rx queues used per port equivalent to CBDMA channels
+* q NQ: Number of Rx queues used per port equivalent to DMA channels
per port (default is 1)
* c CT: Performed packet copy type: software (sw) or hardware using
DMA (hw) (default is hw)
-* s RS: Size of IOAT rawdev ring for hardware copy mode or rte_ring for
+* s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
software copy mode (default is 2048)
* --[no-]mac-updating: Whether MAC address of packets should be changed
or not (default is mac-updating)
+* f FS: set the max frame size
+
+* b BS: set the DMA batch size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
@@ -81,7 +85,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
To run the application in a Linux environment with 2 lcores (the main lcore,
plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -89,7 +93,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
Refer to the *DPDK Getting Started Guide* for general information on
running applications and the Environment Abstraction Layer (EAL) options.
@@ -114,7 +118,7 @@ The first task is to initialize the Environment Abstraction Layer (EAL).
The ``argc`` and ``argv`` arguments are provided to the ``rte_eal_init()``
function. The value returned is the number of parsed arguments:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Init EAL. 8<
:end-before: >8 End of init EAL.
@@ -124,7 +128,7 @@ function. The value returned is the number of parsed arguments:
The ``main()`` also allocates a mempool to hold the mbufs (Message Buffers)
used by the application:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Allocates mempool to hold the mbufs. 8<
:end-before: >8 End of allocates mempool to hold the mbufs.
@@ -135,7 +139,7 @@ detail in the "Mbuf Library" section of the *DPDK Programmer's Guide*.
The ``main()`` function also initializes the ports:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Initialize each port. 8<
:end-before: >8 End of initializing each port.
@@ -145,9 +149,9 @@ Each port is configured using ``port_init()`` function. The Ethernet
ports are configured with local settings using the ``rte_eth_dev_configure()``
function and the ``port_conf`` struct. The RSS is enabled so that
multiple Rx queues could be used for packet receiving and copying by
-multiple CBDMA channels per port:
+multiple DMA channels per port:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring port to use RSS for multiple RX queues. 8<
:end-before: >8 End of configuring port to use RSS for multiple RX queues.
@@ -159,7 +163,7 @@ and ``rte_eth_tx_queue_setup()`` functions.
The Ethernet port is then started:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start device. 8<
:end-before: >8 End of starting device.
@@ -168,7 +172,7 @@ The Ethernet port is then started:
Finally the Rx port is set in promiscuous mode:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: RX port is set in promiscuous mode. 8<
:end-before: >8 End of RX port is set in promiscuous mode.
@@ -177,7 +181,7 @@ Finally the Rx port is set in promiscuous mode:
After that each port application assigns resources needed.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assigning each port resources. 8<
:end-before: >8 End of assigning each port resources.
@@ -188,30 +192,30 @@ special structures are assigned to each port. If software copy was chosen,
application have to assign ring structures for packet exchanging between lcores
assigned to ports.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assign ring structures for packet exchanging. 8<
:end-before: >8 End of assigning ring structures for packet exchanging.
:dedent: 0
-When using hardware copy each Rx queue of the port is assigned an
-IOAT device (``assign_rawdevs()``) using IOAT Rawdev Driver API
-functions:
+When using hardware copy each Rx queue of the port is assigned a DMA device
+(``assign_dmadevs()``) using DMAdev library API functions:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Using IOAT rawdev API functions. 8<
- :end-before: >8 End of using IOAT rawdev API functions.
+ :start-after: Using dmadev API functions. 8<
+ :end-before: >8 End of using dmadev API functions.
:dedent: 0
-The initialization of hardware device is done by ``rte_rawdev_configure()``
-function using ``rte_rawdev_info`` struct. After configuration the device is
-started using ``rte_rawdev_start()`` function. Each of the above operations
-is done in ``configure_rawdev_queue()``.
+The initialization of hardware device is done by ``rte_dmadev_configure()`` and
+``rte_dmadev_vchan_setup()`` functions using the ``rte_dmadev_conf`` and
+``rte_dmadev_vchan_conf`` structs. After configuration the device is started
+using ``rte_dmadev_start()`` function. Each of the above operations is done in
+``configure_dmadev_queue()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuration of device. 8<
:end-before: >8 End of configuration of device.
@@ -233,7 +237,7 @@ The Lcores Launching Functions
As described above, ``main()`` function invokes ``start_forwarding_cores()``
function in order to start processing for each lcore:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start processing for each lcore. 8<
:end-before: >8 End of starting to processfor each lcore.
@@ -244,7 +248,7 @@ using ``rte_eal_remote_launch()``. The configured ports, their number
and number of assigned lcores are stored in user-defined
``rxtx_transmission_config`` struct:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring ports and number of assigned lcores in struct. 8<
:end-before: >8 End of configuration of ports and number of assigned lcores.
@@ -256,24 +260,24 @@ corresponding to ports and lcores configuration provided by the user.
The Lcores Processing Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For receiving packets on each port, the ``ioat_rx_port()`` function is used.
+For receiving packets on each port, the ``dma_rx_port()`` function is used.
The function receives packets on each configured Rx queue. Depending on the
-mode the user chose, it will enqueue packets to IOAT rawdev channels and
+mode the user chose, it will enqueue packets to DMA channels and
then invoke copy process (hardware copy), or perform software copy of each
packet using ``pktmbuf_sw_copy()`` function and enqueue them to an rte_ring:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
The packets are received in burst mode using ``rte_eth_rx_burst()``
function. When using hardware copy mode the packets are enqueued in
-copying device's buffer using ``ioat_enqueue_packets()`` which calls
-``rte_ioat_enqueue_copy()``. When all received packets are in the
-buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
-Function ``rte_ioat_enqueue_copy()`` operates on physical address of
+copying device's buffer using ``dma_enqueue_packets()`` which calls
+``rte_dmadev_copy()``. When all received packets are in the
+buffer the copy operations are started by calling ``rte_dmadev_submit()``.
+Function ``rte_dmadev_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
start of the data buffer (``buf_iova``). Thus the address is adjusted
by ``addr_offset`` value in order to get the address of ``rearm_data``
@@ -282,25 +286,25 @@ be copied in a single operation. This method can be used because the mbufs
are direct mbufs allocated by the apps. If another app uses external buffers,
or indirect mbufs, then multiple copy operations must be used.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
-All completed copies are processed by ``ioat_tx_port()`` function. When using
-hardware copy mode the function invokes ``rte_ioat_completed_ops()``
-on each assigned IOAT channel to gather copied packets. If software copy
+All completed copies are processed by ``dma_tx_port()`` function. When using
+hardware copy mode the function invokes ``rte_dma_completed()``
+on each assigned DMA channel to gather copied packets. If software copy
mode is used the function dequeues copied packets from the rte_ring. Then each
packet MAC address is changed if it was enabled. After that copies are sent
in burst mode using `` rte_eth_tx_burst()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Transmit packets from IOAT rawdev/rte_ring for one port. 8<
- :end-before: >8 End of transmitting packets from IOAT.
+ :start-after: Transmit packets from dmadev/rte_ring for one port. 8<
+ :end-before: >8 End of transmitting packets from dmadev.
:dedent: 0
The Packet Copying Functions
@@ -312,7 +316,7 @@ metadata from source packet to new mbuf, and then copying a data
chunk of source packet. Both memory copies are done using
``rte_memcpy()``:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Perform packet copy there is a user-defined function. 8<
:end-before: >8 End of perform packet copy there is a user-defined function.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index e8db83d3a7..8835dd03ac 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -22,7 +22,7 @@ Sample Applications User Guides
ip_reassembly
kernel_nic_interface
keep_alive
- ioat
+ dma
l2_forward_crypto
l2_forward_job_stats
l2_forward_real_virtual
diff --git a/doc/guides/sample_app_ug/intro.rst b/doc/guides/sample_app_ug/intro.rst
index 8ff223b16c..e765f1fd6b 100644
--- a/doc/guides/sample_app_ug/intro.rst
+++ b/doc/guides/sample_app_ug/intro.rst
@@ -58,8 +58,8 @@ examples are highlighted below.
forwarding Graph, or ``l3fwd_graph`` application does forwarding based on IPv4
like a simple router with DPDK Graph framework.
-* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
- or ``ioatfwd`` application demonstrates how to use IOAT rawdev driver for
+* :doc:`Hardware packet copying<dma>`: The Hardware packet copying,
+ or ``dmafwd`` application demonstrates how to use DMAdev library for
copying packets between two threads.
* :doc:`Packet Distributor<dist_app>`: The Packet Distributor
diff --git a/examples/ioat/Makefile b/examples/dma/Makefile
similarity index 97%
rename from examples/ioat/Makefile
rename to examples/dma/Makefile
index 178fc8778c..59af6478b7 100644
--- a/examples/ioat/Makefile
+++ b/examples/dma/Makefile
@@ -2,10 +2,10 @@
# Copyright(c) 2019 Intel Corporation
# binary name
-APP = ioatfwd
+APP = dmafwd
# all source are stored in SRCS-y
-SRCS-y := ioatfwd.c
+SRCS-y := dmafwd.c
PKGCONF ?= pkg-config
diff --git a/examples/ioat/ioatfwd.c b/examples/dma/dmafwd.c
similarity index 100%
rename from examples/ioat/ioatfwd.c
rename to examples/dma/dmafwd.c
diff --git a/examples/ioat/meson.build b/examples/dma/meson.build
similarity index 94%
rename from examples/ioat/meson.build
rename to examples/dma/meson.build
index c1dd7c9b29..9fdcad660e 100644
--- a/examples/ioat/meson.build
+++ b/examples/dma/meson.build
@@ -11,5 +11,5 @@ allow_experimental_apis = true
deps += ['dmadev']
sources = files(
- 'ioatfwd.c',
+ 'dmafwd.c',
)
diff --git a/examples/meson.build b/examples/meson.build
index 07e682401b..d50f09db12 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -12,13 +12,13 @@ all_examples = [
'bond',
'cmdline',
'distributor',
+ 'dma',
'ethtool',
'eventdev_pipeline',
'fips_validation',
'flow_classify',
'flow_filtering',
'helloworld',
- 'ioat',
'ip_fragmentation',
'ip_pipeline',
'ip_reassembly',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-09-20 11:24 ` Conor Walsh
2021-09-23 15:33 ` Kevin Laatz
0 siblings, 1 reply; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:24 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen, Konstantin Ananyev
> From: Konstantin Ananyev <konstantin.ananyev@intel.com>
>
> Few changes in ioat sample behaviour:
> - Always do SW copy for packet metadata (mbuf fields)
> - Always use same lcore for both DMA requests enqueue and dequeue
>
> Main reasons for that:
> a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
> b) sort of more apples to apples comparison with sw copy.
> c) from my testing things are faster that way.
>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
> examples/ioat/ioatfwd.c | 185 ++++++++++++++++++++++------------------
> 1 file changed, 101 insertions(+), 84 deletions(-)
>
> diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
> index b3977a8be5..1498343492 100644
> --- a/examples/ioat/ioatfwd.c
> +++ b/examples/ioat/ioatfwd.c
> @@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
>
> /* Perform packet copy there is a user-defined function. 8< */
> static inline void
> -pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
> +pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
> {
> - /* Copy packet metadata */
> - rte_memcpy(&dst->rearm_data,
> - &src->rearm_data,
> - offsetof(struct rte_mbuf, cacheline1)
> - - offsetof(struct rte_mbuf, rearm_data));
> + dst->data_off = src->data_off;
> + memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
> + offsetof(struct rte_mbuf, buf_len) -
> + offsetof(struct rte_mbuf, rx_descriptor_fields1));
> +}
>
> - /* Copy packet data */
> +/* Copy packet data */
> +static inline void
> +pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
> +{
> rte_memcpy(rte_pktmbuf_mtod(dst, char *),
> rte_pktmbuf_mtod(src, char *), src->data_len);
> }
> /* >8 End of perform packet copy there is a user-defined function. */
Might need to redo these snippet markers as the function is now split in
two.
<snip>
> +static inline uint32_t
> +ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
> + uint16_t dev_id)
> +{
> + int32_t rc;
rc should be uint32_t, but this is removed in patch 4 of this set during
the change from raw to dma so it shouldn't really matter.
> + /* Dequeue the mbufs from IOAT device. Since all memory
> + * is DPDK pinned memory and therefore all addresses should
> + * be valid, we don't check for copy errors
> + */
> + rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
> + (void *)src, (void *)dst);
> + if (rc < 0) {
> + RTE_LOG(CRIT, IOAT,
> + "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
> + dev_id, rte_errno);
> + rc = 0;
> + }
> + return rc;
> +}
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
@ 2021-09-20 11:24 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:24 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen, Konstantin Ananyev
> From: Konstantin Ananyev <konstantin.ananyev@intel.com>
>
> Add a commandline options to control the HW copy batch size in the
> application.
>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-09-20 11:24 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:24 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen, Konstantin Ananyev
> From: Konstantin Ananyev <konstantin.ananyev@intel.com>
>
> Add command line option for setting the max frame size.
>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-09-20 11:25 ` Conor Walsh
2021-09-24 4:00 ` fengchengwen
1 sibling, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:25 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen
> The dmadev library abstraction allows applications to use the same APIs for
> all DMA device drivers in DPDK. This patch updates the ioatfwd application
> to make use of the new dmadev APIs, in turn making it a generic application
> which can be used with any of the DMA device drivers.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-09-20 11:25 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:25 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen
> Existing functions, structures, defines etc need to be updated to reflect
> the change to using the dmadev APIs.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
@ 2021-09-20 11:25 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-20 11:25 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen
> Since the APIs have been updated from rawdev to dmadev, the application
> should also be renamed to match. This patch also includes the documentation
> updates for the renaming.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
> ---
<snip>
> -The initialization of hardware device is done by ``rte_rawdev_configure()``
> -function using ``rte_rawdev_info`` struct. After configuration the device is
> -started using ``rte_rawdev_start()`` function. Each of the above operations
> -is done in ``configure_rawdev_queue()``.
> +The initialization of hardware device is done by ``rte_dmadev_configure()`` and
> +``rte_dmadev_vchan_setup()`` functions using the ``rte_dmadev_conf`` and
> +``rte_dmadev_vchan_conf`` structs. After configuration the device is started
> +using ``rte_dmadev_start()`` function. Each of the above operations is done in
> +``configure_dmadev_queue()``.
These function names need to be updated for dmadev v22.
<snip>
> The packets are received in burst mode using ``rte_eth_rx_burst()``
> function. When using hardware copy mode the packets are enqueued in
> -copying device's buffer using ``ioat_enqueue_packets()`` which calls
> -``rte_ioat_enqueue_copy()``. When all received packets are in the
> -buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
> -Function ``rte_ioat_enqueue_copy()`` operates on physical address of
> +copying device's buffer using ``dma_enqueue_packets()`` which calls
> +``rte_dmadev_copy()``. When all received packets are in the
> +buffer the copy operations are started by calling ``rte_dmadev_submit()``.
> +Function ``rte_dmadev_copy()`` operates on physical address of
> the packet. Structure ``rte_mbuf`` contains only physical address to
> start of the data buffer (``buf_iova``). Thus the address is adjusted
> by ``addr_offset`` value in order to get the address of ``rearm_data``
These function names need to be updated for dmadev v22.
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
` (5 preceding siblings ...)
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
@ 2021-09-23 13:53 ` fengchengwen
2021-09-23 14:00 ` Kevin Laatz
6 siblings, 1 reply; 63+ messages in thread
From: fengchengwen @ 2021-09-23 13:53 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, conor.walsh
Hi Kevin,
Can you add the following functions?
1. Add dump dmadev which trigger by signal, like:
...
static void
dma_dump(void)
{
uint32_t i, j;
if (copy_mode != COPY_MODE_DMA_NUM)
return;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++)
rte_dma_dump(cfg.ports[i].dmadev_ids[j], stdout);
}
}
...
static void
signal_handler(int signum)
{
if (signum == SIGINT || signum == SIGTERM) {
printf("\n\nSignal %d received, preparing to exit...\n",
signum);
force_quit = true;
} else if (signum == SIGUSR1) {
dma_dump();
}
}
...
signal(SIGUSR1, signal_handler);
2. Controls the output frequency of print_stats. currently fix 1s, hope could control by parameters.
Thanks.
On 2021/9/18 0:41, Kevin Laatz wrote:
> This patchset first adds some additional command line options to the
> existing ioatfwd application to enhance usability.
>
> The last 3 patches of this set then port the ioatfwd application to use the
> dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
> all variables etc are renamed to be more appropriate for using with the
> DMAdev library. Lastly, the application itself is renamed to "dmafwd".
>
> Depends-on: series-18960 ("support dmadev")
>
> Kevin Laatz (3):
> examples/ioat: port application to dmadev APIs
> examples/ioat: update naming to match change to dmadev
> examples/ioat: rename application to dmafwd
>
> Konstantin Ananyev (3):
> examples/ioat: always use same lcore for both DMA requests enqueue and
> dequeue
> examples/ioat: add cmd-line option to control DMA batch size
> examples/ioat: add cmd line option to control max frame size
>
> MAINTAINERS | 7 +-
> .../sample_app_ug/{ioat.rst => dma.rst} | 114 ++--
> doc/guides/sample_app_ug/index.rst | 2 +-
> doc/guides/sample_app_ug/intro.rst | 4 +-
> examples/{ioat => dma}/Makefile | 4 +-
> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 586 +++++++++---------
> examples/{ioat => dma}/meson.build | 10 +-
> examples/meson.build | 2 +-
> 8 files changed, 380 insertions(+), 349 deletions(-)
> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
> rename examples/{ioat => dma}/Makefile (97%)
> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (63%)
> rename examples/{ioat => dma}/meson.build (63%)
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev
2021-09-23 13:53 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev fengchengwen
@ 2021-09-23 14:00 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-23 14:00 UTC (permalink / raw)
To: fengchengwen, dev; +Cc: bruce.richardson, conor.walsh
Hi Chengwen,
On 23/09/2021 14:53, fengchengwen wrote:
> Hi Kevin,
>
> Can you add the following functions?
> 1. Add dump dmadev which trigger by signal, like:
> ...
> static void
> dma_dump(void)
> {
> uint32_t i, j;
>
> if (copy_mode != COPY_MODE_DMA_NUM)
> return;
>
> for (i = 0; i < cfg.nb_ports; i++) {
> for (j = 0; j < cfg.ports[i].nb_queues; j++)
> rte_dma_dump(cfg.ports[i].dmadev_ids[j], stdout);
> }
> }
> ...
> static void
> signal_handler(int signum)
> {
> if (signum == SIGINT || signum == SIGTERM) {
> printf("\n\nSignal %d received, preparing to exit...\n",
> signum);
> force_quit = true;
> } else if (signum == SIGUSR1) {
> dma_dump();
> }
> }
> ...
> signal(SIGUSR1, signal_handler);
Yes, can add this in the v3.
>
> 2. Controls the output frequency of print_stats. currently fix 1s, hope could control by parameters.
Are you asking for a function to control this? It would probably be
better as a cmdline option IMO. I can add this in v3 also.
Thanks for the feedback!
>
> Thanks.
>
>
> On 2021/9/18 0:41, Kevin Laatz wrote:
>> This patchset first adds some additional command line options to the
>> existing ioatfwd application to enhance usability.
>>
>> The last 3 patches of this set then port the ioatfwd application to use the
>> dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
>> all variables etc are renamed to be more appropriate for using with the
>> DMAdev library. Lastly, the application itself is renamed to "dmafwd".
>>
>> Depends-on: series-18960 ("support dmadev")
>>
>> Kevin Laatz (3):
>> examples/ioat: port application to dmadev APIs
>> examples/ioat: update naming to match change to dmadev
>> examples/ioat: rename application to dmafwd
>>
>> Konstantin Ananyev (3):
>> examples/ioat: always use same lcore for both DMA requests enqueue and
>> dequeue
>> examples/ioat: add cmd-line option to control DMA batch size
>> examples/ioat: add cmd line option to control max frame size
>>
>> MAINTAINERS | 7 +-
>> .../sample_app_ug/{ioat.rst => dma.rst} | 114 ++--
>> doc/guides/sample_app_ug/index.rst | 2 +-
>> doc/guides/sample_app_ug/intro.rst | 4 +-
>> examples/{ioat => dma}/Makefile | 4 +-
>> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 586 +++++++++---------
>> examples/{ioat => dma}/meson.build | 10 +-
>> examples/meson.build | 2 +-
>> 8 files changed, 380 insertions(+), 349 deletions(-)
>> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (73%)
>> rename examples/{ioat => dma}/Makefile (97%)
>> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (63%)
>> rename examples/{ioat => dma}/meson.build (63%)
>>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-09-20 11:24 ` Conor Walsh
@ 2021-09-23 15:33 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-23 15:33 UTC (permalink / raw)
To: Conor Walsh, dev; +Cc: bruce.richardson, fengchengwen, Konstantin Ananyev
On 20/09/2021 12:24, Conor Walsh wrote:
>
>> From: Konstantin Ananyev <konstantin.ananyev@intel.com>
>>
>> Few changes in ioat sample behaviour:
>> - Always do SW copy for packet metadata (mbuf fields)
>> - Always use same lcore for both DMA requests enqueue and dequeue
>>
>> Main reasons for that:
>> a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue
>> (yet).
>> b) sort of more apples to apples comparison with sw copy.
>> c) from my testing things are faster that way.
>>
>> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
>> ---
>> examples/ioat/ioatfwd.c | 185 ++++++++++++++++++++++------------------
>> 1 file changed, 101 insertions(+), 84 deletions(-)
>>
>> diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
>> index b3977a8be5..1498343492 100644
>> --- a/examples/ioat/ioatfwd.c
>> +++ b/examples/ioat/ioatfwd.c
>> @@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t
>> dest_portid)
>> /* Perform packet copy there is a user-defined function. 8< */
>> static inline void
>> -pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
>> +pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
>> {
>> - /* Copy packet metadata */
>> - rte_memcpy(&dst->rearm_data,
>> - &src->rearm_data,
>> - offsetof(struct rte_mbuf, cacheline1)
>> - - offsetof(struct rte_mbuf, rearm_data));
>> + dst->data_off = src->data_off;
>> + memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
>> + offsetof(struct rte_mbuf, buf_len) -
>> + offsetof(struct rte_mbuf, rx_descriptor_fields1));
>> +}
>> - /* Copy packet data */
>> +/* Copy packet data */
>> +static inline void
>> +pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
>> +{
>> rte_memcpy(rte_pktmbuf_mtod(dst, char *),
>> rte_pktmbuf_mtod(src, char *), src->data_len);
>> }
>> /* >8 End of perform packet copy there is a user-defined function. */
>
> Might need to redo these snippet markers as the function is now split
> in two.
Will rework this with the overall documentation update after moving to
dmafwd.
>
> <snip>
>
>> +static inline uint32_t
>> +ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[],
>> uint32_t num,
>> + uint16_t dev_id)
>> +{
>> + int32_t rc;
>
> rc should be uint32_t, but this is removed in patch 4 of this set
> during the change from raw to dma so it shouldn't really matter.
I belive int32_t is correct here, since the return value from
rte_ioat_completed_ops() is "int". Otherwise we would not be able to
error check the return.
If rc is negative, we set it to 0 before returning. This ensure that we
have a positive value, which can be safely typecast to uint32_t before
returning.
Thanks for the review, Conor!
>
>> + /* Dequeue the mbufs from IOAT device. Since all memory
>> + * is DPDK pinned memory and therefore all addresses should
>> + * be valid, we don't check for copy errors
>> + */
>> + rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
>> + (void *)src, (void *)dst);
>> + if (rc < 0) {
>> + RTE_LOG(CRIT, IOAT,
>> + "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
>> + dev_id, rte_errno);
>> + rc = 0;
>> + }
>> + return rc;
>> +}
>
> Reviewed-by: Conor Walsh <conor.walsh@intel.com>
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
@ 2021-09-24 4:00 ` fengchengwen
2021-09-24 8:40 ` Kevin Laatz
1 sibling, 1 reply; 63+ messages in thread
From: fengchengwen @ 2021-09-24 4:00 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, conor.walsh
On 2021/9/18 0:41, Kevin Laatz wrote:
> The dmadev library abstraction allows applications to use the same APIs for
> all DMA device drivers in DPDK. This patch updates the ioatfwd application
> to make use of the new dmadev APIs, in turn making it a generic application
> which can be used with any of the DMA device drivers.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
>
> ---
> v2:
> - dmadev api name updates following rebase
> - use rte_config macro for max devs
> - use PRIu64 for printing stats
> ---
> examples/ioat/ioatfwd.c | 239 ++++++++++++++++----------------------
> examples/ioat/meson.build | 8 +-
> 2 files changed, 105 insertions(+), 142 deletions(-)
>
[snip]
>
> typedef enum copy_mode_t {
> @@ -95,6 +94,16 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
> */
> static unsigned short ring_size = 2048;
>
> +/* global mbuf arrays for tracking DMA bufs */
> +#define MBUF_RING_SIZE 1024
> +#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
> +struct dma_bufs {
> + struct rte_mbuf *bufs[MBUF_RING_SIZE];
> + struct rte_mbuf *copies[MBUF_RING_SIZE];
> + uint16_t sent;
> +};
The dma_bufs size only hold 1024 address info, and the dmadev virtual channel ring size is 2048 default,
If the DMA cannot be moved in time, may exist overlay in dma_bufs in dma_dequeue() API.
> +static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX_DEVS];
> +
> /* global transmission config */
> struct rxtx_transmission_config cfg;
[snip]
> }
> /* >8 End of configuration of device. */
>
> @@ -820,18 +789,16 @@ assign_rawdevs(void)
>
> for (i = 0; i < cfg.nb_ports; i++) {
> for (j = 0; j < cfg.ports[i].nb_queues; j++) {
> - struct rte_rawdev_info rdev_info = { 0 };
> + struct rte_dma_info dmadev_info = { 0 };
>
> do {
> - if (rdev_id == rte_rawdev_count())
> + if (rdev_id == rte_dma_count_avail())
> goto end;
> - rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
> - } while (rdev_info.driver_name == NULL ||
> - strcmp(rdev_info.driver_name,
> - IOAT_PMD_RAWDEV_NAME_STR) != 0);
> + rte_dma_info_get(rdev_id++, &dmadev_info);
> + } while (!rte_dma_is_valid(rdev_id));
>
> - cfg.ports[i].ioat_ids[j] = rdev_id - 1;
> - configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
> + cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
> + configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
Tests show that if there are four dmadevs, only three dmadevs can be allocated here.
1st malloc: rdev_id=0, assign successful, and the dmadev_id=0, rdev_id=1
2st malloc: rdev_id=1, assign successful, and the dmadev_id=1, rdev_id=2
3st malloc: rdev_id=2, assign successful, and the dmadev_id=2, rdev_id=3
4st malloc: rdev_id=3, assign failed, because rte_dma_info_get(rdev_id++,...), the rdev_id is 4 and it's not a valid id.
Recommended use rte_dma_next_dev() which Bruce introduced.
> ++nb_rawdev;
> }
> }
> @@ -840,7 +807,7 @@ assign_rawdevs(void)
> rte_exit(EXIT_FAILURE,
> "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
> nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
> - RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
> + RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
> }
> /* >8 End of using IOAT rawdev API functions. */
>
[snip]
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs
2021-09-24 4:00 ` fengchengwen
@ 2021-09-24 8:40 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-24 8:40 UTC (permalink / raw)
To: fengchengwen, dev; +Cc: bruce.richardson, conor.walsh
On 24/09/2021 05:00, fengchengwen wrote:
> On 2021/9/18 0:41, Kevin Laatz wrote:
>> The dmadev library abstraction allows applications to use the same APIs for
>> all DMA device drivers in DPDK. This patch updates the ioatfwd application
>> to make use of the new dmadev APIs, in turn making it a generic application
>> which can be used with any of the DMA device drivers.
>>
>> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
>>
>> ---
>> v2:
>> - dmadev api name updates following rebase
>> - use rte_config macro for max devs
>> - use PRIu64 for printing stats
>> ---
>> examples/ioat/ioatfwd.c | 239 ++++++++++++++++----------------------
>> examples/ioat/meson.build | 8 +-
>> 2 files changed, 105 insertions(+), 142 deletions(-)
>>
> [snip]
>
>>
>> typedef enum copy_mode_t {
>> @@ -95,6 +94,16 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
>> */
>> static unsigned short ring_size = 2048;
>>
>> +/* global mbuf arrays for tracking DMA bufs */
>> +#define MBUF_RING_SIZE 1024
>> +#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
>> +struct dma_bufs {
>> + struct rte_mbuf *bufs[MBUF_RING_SIZE];
>> + struct rte_mbuf *copies[MBUF_RING_SIZE];
>> + uint16_t sent;
>> +};
> The dma_bufs size only hold 1024 address info, and the dmadev virtual channel ring size is 2048 default,
> If the DMA cannot be moved in time, may exist overlay in dma_bufs in dma_dequeue() API.
Will match the dmadev lib default in v3.
>
>> +static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX_DEVS];
>> +
>> /* global transmission config */
>> struct rxtx_transmission_config cfg;
> [snip]
>
>> }
>> /* >8 End of configuration of device. */
>>
>> @@ -820,18 +789,16 @@ assign_rawdevs(void)
>>
>> for (i = 0; i < cfg.nb_ports; i++) {
>> for (j = 0; j < cfg.ports[i].nb_queues; j++) {
>> - struct rte_rawdev_info rdev_info = { 0 };
>> + struct rte_dma_info dmadev_info = { 0 };
>>
>> do {
>> - if (rdev_id == rte_rawdev_count())
>> + if (rdev_id == rte_dma_count_avail())
>> goto end;
>> - rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
>> - } while (rdev_info.driver_name == NULL ||
>> - strcmp(rdev_info.driver_name,
>> - IOAT_PMD_RAWDEV_NAME_STR) != 0);
>> + rte_dma_info_get(rdev_id++, &dmadev_info);
>> + } while (!rte_dma_is_valid(rdev_id));
>>
>> - cfg.ports[i].ioat_ids[j] = rdev_id - 1;
>> - configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
>> + cfg.ports[i].dmadev_ids[j] = rdev_id - 1;
>> + configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
> Tests show that if there are four dmadevs, only three dmadevs can be allocated here.
>
> 1st malloc: rdev_id=0, assign successful, and the dmadev_id=0, rdev_id=1
> 2st malloc: rdev_id=1, assign successful, and the dmadev_id=1, rdev_id=2
> 3st malloc: rdev_id=2, assign successful, and the dmadev_id=2, rdev_id=3
> 4st malloc: rdev_id=3, assign failed, because rte_dma_info_get(rdev_id++,...), the rdev_id is 4 and it's not a valid id.
>
> Recommended use rte_dma_next_dev() which Bruce introduced.
Ack, will use rte_dma_next_dev() in v3.
Thanks!
>> ++nb_rawdev;
>> }
>> }
>> @@ -840,7 +807,7 @@ assign_rawdevs(void)
>> rte_exit(EXIT_FAILURE,
>> "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
>> nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
>> - RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
>> + RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
>> }
>> /* >8 End of using IOAT rawdev API functions. */
>>
> [snip]
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 0/8] port ioatfwd app to dmadev
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (6 preceding siblings ...)
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
` (7 more replies)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
9 siblings, 8 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
This patchset first adds some additional command line options to the
existing ioatfwd application to enhance usability.
The last 3 patches of this set then port the ioatfwd application to use the
dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
all variables etc are renamed to be more appropriate for using with the
DMAdev library. Lastly, the application itself is renamed to "dmafwd".
Depends-on: series-19140 ("support dmadev")
---
v3:
- add signal-triggered device dump
- add cmd line option to control stats print frequency
- documentation updates
- small miscellaneous changes from review feedback
Kevin Laatz (5):
examples/ioat: add cmd line option to control stats print interval
examples/ioat: add signal-triggered device dumps
examples/ioat: port application to dmadev APIs
examples/ioat: update naming to match change to dmadev
examples/ioat: rename application to dmafwd
Konstantin Ananyev (3):
examples/ioat: always use same lcore for both DMA requests enqueue and
dequeue
examples/ioat: add cmd line option to control DMA batch size
examples/ioat: add cmd line option to control max frame size
.../sample_app_ug/{ioat.rst => dma.rst} | 149 ++---
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 632 ++++++++++--------
examples/{ioat => dma}/meson.build | 10 +-
examples/meson.build | 2 +-
7 files changed, 427 insertions(+), 376 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
rename examples/{ioat => dma}/meson.build (63%)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
` (6 subsequent siblings)
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Documentation updates to reflect these changes are also included.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 39 +++----
examples/ioat/ioatfwd.c | 185 ++++++++++++++++--------------
2 files changed, 117 insertions(+), 107 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index ee0a627b06..2e9d3d6258 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -183,10 +183,8 @@ After that each port application assigns resources needed.
:end-before: >8 End of assigning each port resources.
:dedent: 1
-Depending on mode set (whether copy should be done by software or by hardware)
-special structures are assigned to each port. If software copy was chosen,
-application have to assign ring structures for packet exchanging between lcores
-assigned to ports.
+Ring structures are assigned for exchanging packets between lcores for both SW
+and HW copy modes.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -275,12 +273,8 @@ copying device's buffer using ``ioat_enqueue_packets()`` which calls
buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
Function ``rte_ioat_enqueue_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
-start of the data buffer (``buf_iova``). Thus the address is adjusted
-by ``addr_offset`` value in order to get the address of ``rearm_data``
-member of ``rte_mbuf``. That way both the packet data and metadata can
-be copied in a single operation. This method can be used because the mbufs
-are direct mbufs allocated by the apps. If another app uses external buffers,
-or indirect mbufs, then multiple copy operations must be used.
+start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
+used to get the address of the start of the data within the mbuf.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -289,12 +283,13 @@ or indirect mbufs, then multiple copy operations must be used.
:dedent: 0
-All completed copies are processed by ``ioat_tx_port()`` function. When using
-hardware copy mode the function invokes ``rte_ioat_completed_ops()``
-on each assigned IOAT channel to gather copied packets. If software copy
-mode is used the function dequeues copied packets from the rte_ring. Then each
-packet MAC address is changed if it was enabled. After that copies are sent
-in burst mode using `` rte_eth_tx_burst()``.
+Once the copies have been completed (this includes gathering the completions in
+HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
+is used to pass the packets to the TX function.
+
+All completed copies are processed by ``ioat_tx_port()`` function. This function
+dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
+if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
@@ -306,11 +301,9 @@ in burst mode using `` rte_eth_tx_burst()``.
The Packet Copying Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-In order to perform packet copy there is a user-defined function
-``pktmbuf_sw_copy()`` used. It copies a whole packet by copying
-metadata from source packet to new mbuf, and then copying a data
-chunk of source packet. Both memory copies are done using
-``rte_memcpy()``:
+In order to perform SW packet copy, there are user-defined functions to first copy
+the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
+(``pktmbuf_sw_copy()``):
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -318,8 +311,8 @@ chunk of source packet. Both memory copies are done using
:end-before: >8 End of perform packet copy there is a user-defined function.
:dedent: 0
-The metadata in this example is copied from ``rearm_data`` member of
-``rte_mbuf`` struct up to ``cacheline1``.
+The metadata in this example is copied from ``rx_descriptor_fields1`` marker of
+``rte_mbuf`` struct up to ``buf_len`` member.
In order to understand why software packet copying is done as shown
above please refer to the "Mbuf Library" section of the
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index b3977a8be5..1498343492 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
/* Perform packet copy there is a user-defined function. 8< */
static inline void
-pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
{
- /* Copy packet metadata */
- rte_memcpy(&dst->rearm_data,
- &src->rearm_data,
- offsetof(struct rte_mbuf, cacheline1)
- - offsetof(struct rte_mbuf, rearm_data));
+ dst->data_off = src->data_off;
+ memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
+ offsetof(struct rte_mbuf, buf_len) -
+ offsetof(struct rte_mbuf, rx_descriptor_fields1));
+}
- /* Copy packet data */
+/* Copy packet data */
+static inline void
+pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+{
rte_memcpy(rte_pktmbuf_mtod(dst, char *),
rte_pktmbuf_mtod(src, char *), src->data_len);
}
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf **pkts,
+ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
int ret;
uint32_t i;
- struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
-
- const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
- &pkts[0]->rearm_data);
-
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_copy, nb_rx);
-
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
ret = rte_ioat_enqueue_copy(dev_id,
- pkts[i]->buf_iova - addr_offset,
- pkts_copy[i]->buf_iova - addr_offset,
- rte_pktmbuf_data_len(pkts[i]) + addr_offset,
+ rte_pktmbuf_iova(pkts[i]),
+ rte_pktmbuf_iova(pkts_copy[i]),
+ rte_pktmbuf_data_len(pkts[i]),
(uintptr_t)pkts[i],
(uintptr_t)pkts_copy[i]);
@@ -376,20 +369,50 @@ ioat_enqueue_packets(struct rte_mbuf **pkts,
}
ret = i;
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
- nb_rx - i);
-
return ret;
}
+static inline uint32_t
+ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+ uint32_t num, uint16_t dev_id)
+{
+ uint32_t n;
+
+ n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
+
+ return n;
+}
+
+static inline uint32_t
+ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+ uint16_t dev_id)
+{
+ int32_t rc;
+ /* Dequeue the mbufs from IOAT device. Since all memory
+ * is DPDK pinned memory and therefore all addresses should
+ * be valid, we don't check for copy errors
+ */
+ rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
+ (void *)src, (void *)dst);
+ if (rc < 0) {
+ RTE_LOG(CRIT, IOAT,
+ "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
+ dev_id, rte_errno);
+ rc = 0;
+ }
+ return rc;
+}
+
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
static void
ioat_rx_port(struct rxtx_port_config *rx_config)
{
+ int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
for (i = 0; i < rx_config->nb_queues; i++) {
@@ -401,40 +424,54 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
+ ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst_copy, nb_rx);
+
+ if (unlikely(ret < 0))
+ rte_exit(EXIT_FAILURE,
+ "Unable to allocate memory.\n");
+
+ for (j = 0; j < nb_rx; j++)
+ pktmbuf_metadata_copy(pkts_burst[j],
+ pkts_burst_copy[j]);
+
if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Perform packet hardware copy */
- nb_enq = ioat_enqueue_packets(pkts_burst,
+
+ /* enqueue packets for hardware copy */
+ nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
nb_rx, rx_config->ioat_ids[i]);
- if (nb_enq > 0)
- rte_ioat_perform_ops(rx_config->ioat_ids[i]);
- } else {
- /* Perform packet software copy, free source packets */
- int ret;
- struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst_copy, nb_rx);
+ /* free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst[nb_enq],
+ nb_rx - nb_enq);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE,
- "Unable to allocate memory.\n");
+ port_statistics.copy_dropped[rx_config->rxtx_port] +=
+ (nb_rx - nb_enq);
+ /* get completed copies */
+ nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ } else {
+ /* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
pktmbuf_sw_copy(pkts_burst[j],
pkts_burst_copy[j]);
+ }
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst, nb_rx);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst, nb_rx);
- nb_enq = rte_ring_enqueue_burst(
- rx_config->rx_to_tx_ring,
- (void *)pkts_burst_copy, nb_rx, NULL);
+ nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
+ (void *)pkts_burst_copy, nb_rx, NULL);
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&pkts_burst_copy[nb_enq],
- nb_rx - nb_enq);
- }
+ /* Free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
port_statistics.copy_dropped[rx_config->rxtx_port] +=
(nb_rx - nb_enq);
@@ -446,51 +483,33 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
static void
ioat_tx_port(struct rxtx_port_config *tx_config)
{
- uint32_t i, j, nb_dq = 0;
- struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
- struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
+ uint32_t i, j, nb_dq, nb_tx;
+ struct rte_mbuf *mbufs[MAX_PKT_BURST];
for (i = 0; i < tx_config->nb_queues; i++) {
- if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Dequeue the mbufs from IOAT device. Since all memory
- * is DPDK pinned memory and therefore all addresses should
- * be valid, we don't check for copy errors
- */
- nb_dq = rte_ioat_completed_ops(
- tx_config->ioat_ids[i], MAX_PKT_BURST, NULL, NULL,
- (void *)mbufs_src, (void *)mbufs_dst);
- } else {
- /* Dequeue the mbufs from rx_to_tx_ring. */
- nb_dq = rte_ring_dequeue_burst(
- tx_config->rx_to_tx_ring, (void *)mbufs_dst,
- MAX_PKT_BURST, NULL);
- }
-
- if ((int32_t) nb_dq <= 0)
- return;
- if (copy_mode == COPY_MODE_IOAT_NUM)
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)mbufs_src, nb_dq);
+ /* Dequeue the mbufs from rx_to_tx_ring. */
+ nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+ (void *)mbufs, MAX_PKT_BURST, NULL);
+ if (nb_dq == 0)
+ continue;
/* Update macs if enabled */
if (mac_updating) {
for (j = 0; j < nb_dq; j++)
- update_mac_addrs(mbufs_dst[j],
+ update_mac_addrs(mbufs[j],
tx_config->rxtx_port);
}
- const uint16_t nb_tx = rte_eth_tx_burst(
- tx_config->rxtx_port, 0,
- (void *)mbufs_dst, nb_dq);
+ nb_tx = rte_eth_tx_burst(tx_config->rxtx_port, 0,
+ (void *)mbufs, nb_dq);
port_statistics.tx[tx_config->rxtx_port] += nb_tx;
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&mbufs_dst[nb_tx],
- nb_dq - nb_tx);
+ (void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
/* >8 End of transmitting packets from IOAT. */
@@ -853,9 +872,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, nb_queues, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device:"
@@ -974,7 +990,8 @@ main(int argc, char **argv)
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
- 4 * MAX_PKT_BURST) + rte_lcore_count() * MEMPOOL_CACHE_SIZE),
+ 4 * MAX_PKT_BURST + ring_size) + ring_size +
+ rte_lcore_count() * MEMPOOL_CACHE_SIZE),
MIN_POOL_SIZE);
/* Create the mbuf pool */
@@ -1006,8 +1023,8 @@ main(int argc, char **argv)
if (copy_mode == COPY_MODE_IOAT_NUM)
assign_rawdevs();
- else /* copy_mode == COPY_MODE_SW_NUM */
- assign_rings();
+
+ assign_rings();
/* >8 End of assigning each port resources. */
start_forwarding_cores();
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 2/8] examples/ioat: add cmd line option to control DMA batch size
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
` (5 subsequent siblings)
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 40 ++++++++++++++++++++++++-------
2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 2e9d3d6258..404ca2e19a 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating]
+ [--[no-]mac-updating] [-b BS]
where,
@@ -64,6 +64,8 @@ where,
* --[no-]mac-updating: Whether MAC address of packets should be changed
or not (default is mac-updating)
+* b BS: set the DMA batch size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 1498343492..4d132a87e5 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -24,6 +24,7 @@
#define CMD_LINE_OPT_NB_QUEUE "nb-queue"
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
+#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -102,6 +103,8 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
+static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -374,15 +377,25 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
static inline uint32_t
ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
- uint32_t num, uint16_t dev_id)
+ uint32_t num, uint32_t step, uint16_t dev_id)
{
- uint32_t n;
+ uint32_t i, k, m, n;
+
+ k = 0;
+ for (i = 0; i < num; i += m) {
+
+ m = RTE_MIN(step, num - i);
+ n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ k += n;
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
- n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
- if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ /* don't try to enqueue more if HW queue is full */
+ if (n != m)
+ break;
+ }
- return n;
+ return k;
}
static inline uint32_t
@@ -439,7 +452,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -590,6 +603,7 @@ static void
ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -b --dma-batch-size: number of requests per DMA batch\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -631,9 +645,10 @@ static int
ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
+ "b:" /* dma batch size */
+ "c:" /* copy type (sw|hw) */
"p:" /* portmask */
"q:" /* number of RX queues per port */
- "c:" /* copy type (sw|hw) */
"s:" /* ring size */
;
@@ -644,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_NB_QUEUE, required_argument, NULL, 'q'},
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
+ {CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{NULL, 0, 0, 0}
};
@@ -660,6 +676,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
lgopts, &option_index)) != EOF) {
switch (opt) {
+ case 'b':
+ ioat_batch_sz = atoi(optarg);
+ if (ioat_batch_sz > MAX_PKT_BURST) {
+ printf("Invalid dma batch size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 3/8] examples/ioat: add cmd line option to control max frame size
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
` (4 subsequent siblings)
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 25 +++++++++++++++++++++++--
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 404ca2e19a..127129dd4b 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS]
+ [--[no-]mac-updating] [-b BS] [-f FS]
where,
@@ -66,6 +66,8 @@ where,
* b BS: set the DMA batch size
+* f FS: set the max frame size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 4d132a87e5..1711827cea 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -25,6 +25,7 @@
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
+#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -104,6 +105,7 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -604,6 +606,7 @@ ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
+ " -f --max-frame-size: max frame size\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -647,6 +650,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
static const char short_options[] =
"b:" /* dma batch size */
"c:" /* copy type (sw|hw) */
+ "f:" /* max frame size */
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
@@ -660,6 +664,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
+ {CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
{NULL, 0, 0, 0}
};
@@ -684,6 +689,15 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
return -1;
}
break;
+ case 'f':
+ max_frame_size = atoi(optarg);
+ if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
+ printf("Invalid max frame size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
+
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
@@ -880,6 +894,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
struct rte_eth_dev_info dev_info;
int ret, i;
+ if (max_frame_size > local_port_conf.rxmode.max_rx_pkt_len) {
+ local_port_conf.rxmode.max_rx_pkt_len = max_frame_size;
+ local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+
/* Skip ports that are not enabled */
if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@@ -990,6 +1009,7 @@ main(int argc, char **argv)
uint16_t nb_ports, portid;
uint32_t i;
unsigned int nb_mbufs;
+ size_t sz;
/* Init EAL. 8< */
ret = rte_eal_init(argc, argv);
@@ -1019,9 +1039,10 @@ main(int argc, char **argv)
MIN_POOL_SIZE);
/* Create the mbuf pool */
+ sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
+ sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
- MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
+ MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
if (ioat_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (2 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-29 10:32 ` Conor Walsh
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
` (3 subsequent siblings)
7 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 31 +++++++++++++++++++++++--------
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 127129dd4b..1edad3f9ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS] [-f FS]
+ [--[no-]mac-updating] [-b BS] [-f FS] [-i SI]
where,
@@ -68,6 +68,8 @@ where,
* f FS: set the max frame size
+* i SI: set the interval, in second, between statistics prints (default is 1)
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 1711827cea..6e700727b9 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -26,6 +26,7 @@
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
+#define CMD_LINE_OPT_STATS_INTERVAL "stats-interval"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -95,6 +96,9 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
*/
static unsigned short ring_size = 2048;
+/* interval, in seconds, between stats prints */
+static unsigned short stats_interval = 1;
+
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -152,15 +156,15 @@ print_total_stats(struct total_statistics *ts)
"\nTotal packets Tx: %24"PRIu64" [pps]"
"\nTotal packets Rx: %24"PRIu64" [pps]"
"\nTotal packets dropped: %19"PRIu64" [pps]",
- ts->total_packets_tx,
- ts->total_packets_rx,
- ts->total_packets_dropped);
+ ts->total_packets_tx / stats_interval,
+ ts->total_packets_rx / stats_interval,
+ ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
"\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues,
- ts->total_failed_enqueues);
+ ts->total_successful_enqueues / stats_interval,
+ ts->total_failed_enqueues / stats_interval);
}
printf("\n====================================================\n");
@@ -248,10 +252,10 @@ print_stats(char *prgname)
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
- /* Sleep for 1 second each round - init sleep allows reading
+ /* Sleep for "stats_interval" seconds each round - init sleep allows reading
* messages from app startup.
*/
- sleep(1);
+ sleep(stats_interval);
/* Clear screen and move to top left */
printf("%s%s", clr, topLeft);
@@ -614,7 +618,8 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+ " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
@@ -654,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
+ "i:" /* interval, in seconds, between stats prints */
;
static const struct option lgopts[] = {
@@ -665,6 +671,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
+ {CMD_LINE_OPT_STATS_INTERVAL, required_argument, NULL, 'i'},
{NULL, 0, 0, 0}
};
@@ -738,6 +745,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
}
break;
+ case 'i':
+ stats_interval = atoi(optarg);
+ if (stats_interval == 0) {
+ printf("Invalid stats interval, setting to 1\n");
+ stats_interval = 1; /* set to default */
+ }
+ break;
+
/* long options */
case 0:
break;
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (3 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-29 10:33 ` Conor Walsh
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
` (2 subsequent siblings)
7 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Enable dumping device info via the signal handler. With this change, when a
SIGUSR1 is issued, the application will print a dump of all devices being
used by the application.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
---
examples/ioat/ioatfwd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 6e700727b9..06107cd753 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1007,6 +1007,20 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
}
+/* Get a device dump for each device being used by the application */
+static void
+rawdev_dump(void)
+{
+ uint32_t i, j;
+
+ if (copy_mode != COPY_MODE_IOAT_NUM)
+ return;
+
+ for (i = 0; i < cfg.nb_ports; i++)
+ for (j = 0; j < cfg.ports[i].nb_queues; j++)
+ rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+}
+
static void
signal_handler(int signum)
{
@@ -1014,6 +1028,8 @@ signal_handler(int signum)
printf("\n\nSignal %d received, preparing to exit...\n",
signum);
force_quit = true;
+ } else if (signum == SIGUSR1) {
+ rawdev_dump();
}
}
@@ -1037,6 +1053,7 @@ main(int argc, char **argv)
force_quit = false;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
+ signal(SIGUSR1, signal_handler);
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 6/8] examples/ioat: port application to dmadev APIs
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (4 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
v2:
- dmadev api name updates following rebase
- use rte_config macro for max devs
v3:
- increase default ring size to 2048 for dma_bufs
- use rte_dma_next_dev() when assigning devices to queues
---
examples/ioat/ioatfwd.c | 247 ++++++++++++++++----------------------
examples/ioat/meson.build | 8 +-
2 files changed, 107 insertions(+), 148 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 06107cd753..f06d170789 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019-2021 Intel Corporation
*/
#include <stdint.h>
@@ -10,11 +10,10 @@
#include <rte_malloc.h>
#include <rte_ethdev.h>
-#include <rte_rawdev.h>
-#include <rte_ioat_rawdev.h>
+#include <rte_dmadev.h>
/* size of ring used for software copying between rx and tx. */
-#define RTE_LOGTYPE_IOAT RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_DMA RTE_LOGTYPE_USER1
#define MAX_PKT_BURST 32
#define MEMPOOL_CACHE_SIZE 512
#define MIN_POOL_SIZE 65536U
@@ -41,8 +40,8 @@ struct rxtx_port_config {
uint16_t nb_queues;
/* for software copy mode */
struct rte_ring *rx_to_tx_ring;
- /* for IOAT rawdev copy mode */
- uint16_t ioat_ids[MAX_RX_QUEUES_COUNT];
+ /* for dmadev HW copy mode */
+ uint16_t dmadev_ids[MAX_RX_QUEUES_COUNT];
};
/* Configuring ports and number of assigned lcores in struct. 8< */
@@ -61,13 +60,13 @@ struct ioat_port_statistics {
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
struct ioat_port_statistics port_statistics;
-
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
uint64_t total_packets_rx;
- uint64_t total_successful_enqueues;
- uint64_t total_failed_enqueues;
+ uint64_t total_submitted;
+ uint64_t total_completed;
+ uint64_t total_failed;
};
typedef enum copy_mode_t {
@@ -98,6 +97,15 @@ static unsigned short ring_size = 2048;
/* interval, in seconds, between stats prints */
static unsigned short stats_interval = 1;
+/* global mbuf arrays for tracking DMA bufs */
+#define MBUF_RING_SIZE 2048
+#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
+struct dma_bufs {
+ struct rte_mbuf *bufs[MBUF_RING_SIZE];
+ struct rte_mbuf *copies[MBUF_RING_SIZE];
+ uint16_t sent;
+};
+static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX_DEVS];
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -135,36 +143,32 @@ print_port_stats(uint16_t port_id)
/* Print out statistics for one IOAT rawdev device. */
static void
-print_rawdev_stats(uint32_t dev_id, uint64_t *xstats,
- unsigned int *ids_xstats, uint16_t nb_xstats,
- struct rte_rawdev_xstats_name *names_xstats)
+print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
- uint16_t i;
-
- printf("\nIOAT channel %u", dev_id);
- for (i = 0; i < nb_xstats; i++)
- printf("\n\t %s: %*"PRIu64,
- names_xstats[ids_xstats[i]].name,
- (int)(37 - strlen(names_xstats[ids_xstats[i]].name)),
- xstats[i]);
+ printf("\nDMA channel %u", dev_id);
+ printf("\n\t Total submitted ops: %"PRIu64"", stats.submitted);
+ printf("\n\t Total completed ops: %"PRIu64"", stats.completed);
+ printf("\n\t Total failed ops: %"PRIu64"", stats.errors);
}
static void
print_total_stats(struct total_statistics *ts)
{
printf("\nAggregate statistics ==============================="
- "\nTotal packets Tx: %24"PRIu64" [pps]"
- "\nTotal packets Rx: %24"PRIu64" [pps]"
- "\nTotal packets dropped: %19"PRIu64" [pps]",
+ "\nTotal packets Tx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets Rx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets dropped: %17"PRIu64" [pkt/s]",
ts->total_packets_tx / stats_interval,
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
- printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
- "\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues / stats_interval,
- ts->total_failed_enqueues / stats_interval);
+ printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
+ "\nTotal completed ops: %19"PRIu64" [ops/s]"
+ "\nTotal failed ops: %22"PRIu64" [ops/s]",
+ ts->total_submitted / stats_interval,
+ ts->total_completed / stats_interval,
+ ts->total_failed / stats_interval);
}
printf("\n====================================================\n");
@@ -175,13 +179,10 @@ static void
print_stats(char *prgname)
{
struct total_statistics ts, delta_ts;
+ struct rte_dma_stats stats = {0};
uint32_t i, port_id, dev_id;
- struct rte_rawdev_xstats_name *names_xstats;
- uint64_t *xstats;
- unsigned int *ids_xstats, nb_xstats;
char status_string[255]; /* to print at the top of the output */
int status_strlen;
- int ret;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -207,48 +208,6 @@ print_stats(char *prgname)
sizeof(status_string) - status_strlen,
"Ring Size = %d", ring_size);
- /* Allocate memory for xstats names and values */
- ret = rte_rawdev_xstats_names_get(
- cfg.ports[0].ioat_ids[0], NULL, 0);
- if (ret < 0)
- return;
- nb_xstats = (unsigned int)ret;
-
- names_xstats = malloc(sizeof(*names_xstats) * nb_xstats);
- if (names_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat names memory\n");
- }
- rte_rawdev_xstats_names_get(cfg.ports[0].ioat_ids[0],
- names_xstats, nb_xstats);
-
- ids_xstats = malloc(sizeof(*ids_xstats) * 2);
- if (ids_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat ids_xstats memory\n");
- }
-
- xstats = malloc(sizeof(*xstats) * 2);
- if (xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat memory\n");
- }
-
- /* Get failed/successful enqueues stats index */
- ids_xstats[0] = ids_xstats[1] = nb_xstats;
- for (i = 0; i < nb_xstats; i++) {
- if (!strcmp(names_xstats[i].name, "failed_enqueues"))
- ids_xstats[0] = i;
- else if (!strcmp(names_xstats[i].name, "successful_enqueues"))
- ids_xstats[1] = i;
- if (ids_xstats[0] < nb_xstats && ids_xstats[1] < nb_xstats)
- break;
- }
- if (ids_xstats[0] == nb_xstats || ids_xstats[1] == nb_xstats) {
- rte_exit(EXIT_FAILURE,
- "Error getting failed/successful enqueues stats index\n");
- }
-
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
@@ -280,17 +239,13 @@ print_stats(char *prgname)
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- dev_id = cfg.ports[i].ioat_ids[j];
- rte_rawdev_xstats_get(dev_id,
- ids_xstats, xstats, 2);
+ dev_id = cfg.ports[i].dmadev_ids[j];
+ rte_dma_stats_get(dev_id, 0, &stats);
+ print_dmadev_stats(dev_id, stats);
- print_rawdev_stats(dev_id, xstats,
- ids_xstats, 2, names_xstats);
-
- delta_ts.total_failed_enqueues +=
- xstats[ids_xstats[0]];
- delta_ts.total_successful_enqueues +=
- xstats[ids_xstats[1]];
+ delta_ts.total_submitted += stats.submitted;
+ delta_ts.total_completed += stats.completed;
+ delta_ts.total_failed += stats.errors;
}
}
}
@@ -298,9 +253,9 @@ print_stats(char *prgname)
delta_ts.total_packets_tx -= ts.total_packets_tx;
delta_ts.total_packets_rx -= ts.total_packets_rx;
delta_ts.total_packets_dropped -= ts.total_packets_dropped;
- delta_ts.total_failed_enqueues -= ts.total_failed_enqueues;
- delta_ts.total_successful_enqueues -=
- ts.total_successful_enqueues;
+ delta_ts.total_submitted -= ts.total_submitted;
+ delta_ts.total_completed -= ts.total_completed;
+ delta_ts.total_failed -= ts.total_failed;
printf("\n");
print_total_stats(&delta_ts);
@@ -310,14 +265,10 @@ print_stats(char *prgname)
ts.total_packets_tx += delta_ts.total_packets_tx;
ts.total_packets_rx += delta_ts.total_packets_rx;
ts.total_packets_dropped += delta_ts.total_packets_dropped;
- ts.total_failed_enqueues += delta_ts.total_failed_enqueues;
- ts.total_successful_enqueues +=
- delta_ts.total_successful_enqueues;
+ ts.total_submitted += delta_ts.total_submitted;
+ ts.total_completed += delta_ts.total_completed;
+ ts.total_failed += delta_ts.total_failed;
}
-
- free(names_xstats);
- free(xstats);
- free(ids_xstats);
}
static void
@@ -361,20 +312,22 @@ static uint32_t
ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
+ struct dma_bufs *dma = &dma_bufs[dev_id];
int ret;
uint32_t i;
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
- ret = rte_ioat_enqueue_copy(dev_id,
+ ret = rte_dma_copy(dev_id, 0,
rte_pktmbuf_iova(pkts[i]),
rte_pktmbuf_iova(pkts_copy[i]),
- rte_pktmbuf_data_len(pkts[i]),
- (uintptr_t)pkts[i],
- (uintptr_t)pkts_copy[i]);
+ rte_pktmbuf_data_len(pkts[i]), 0);
- if (ret != 1)
+ if (ret < 0)
break;
+
+ dma->bufs[ret & MBUF_RING_MASK] = pkts[i];
+ dma->copies[ret & MBUF_RING_MASK] = pkts_copy[i];
}
ret = i;
@@ -394,7 +347,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ rte_dma_submit(dev_id, 0);
/* don't try to enqueue more if HW queue is full */
if (n != m)
@@ -408,20 +361,27 @@ static inline uint32_t
ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
- int32_t rc;
+ struct dma_bufs *dma = &dma_bufs[dev_id];
+ uint16_t nb_dq, filled;
/* Dequeue the mbufs from IOAT device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
- rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
- (void *)src, (void *)dst);
- if (rc < 0) {
- RTE_LOG(CRIT, IOAT,
- "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
- dev_id, rte_errno);
- rc = 0;
+ nb_dq = rte_dma_completed(dev_id, 0, num, NULL, NULL);
+
+ /* Return early if no work to do */
+ if (unlikely(nb_dq == 0))
+ return nb_dq;
+
+ /* Populate pkts_copy with the copies bufs from dma->copies */
+ for (filled = 0; filled < nb_dq; filled++) {
+ src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
+ dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
}
- return rc;
+ dma->sent += nb_dq;
+
+ return filled;
+
}
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
@@ -458,7 +418,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -473,7 +433,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* get completed copies */
nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
- MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
@@ -540,7 +500,7 @@ rx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main rx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -555,7 +515,7 @@ tx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main tx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main tx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -570,7 +530,7 @@ rxtx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx and tx loop for copy on"
+ RTE_LOG(INFO, DMA, "Entering main rx and tx loop for copy on"
" lcore %u\n", rte_lcore_id());
while (!force_quit)
@@ -585,7 +545,7 @@ static void start_forwarding_cores(void)
{
uint32_t lcore_id = rte_lcore_id();
- RTE_LOG(INFO, IOAT, "Entering %s on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering %s on lcore %u\n",
__func__, rte_lcore_id());
if (cfg.nb_lcores == 1) {
@@ -809,20 +769,28 @@ check_link_status(uint32_t port_mask)
static void
configure_rawdev_queue(uint32_t dev_id)
{
- struct rte_ioat_rawdev_config dev_config = {
- .ring_size = ring_size,
- .no_prefetch_completions = (cfg.nb_lcores > 1),
+ struct rte_dma_info info;
+ struct rte_dma_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dma_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ .nb_desc = ring_size
};
- struct rte_rawdev_info info = { .dev_private = &dev_config };
+ uint16_t vchan = 0;
- if (rte_rawdev_configure(dev_id, &info, sizeof(dev_config)) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_configure()\n");
+ if (rte_dma_configure(dev_id, &dev_config) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_configure()\n");
+
+ if (rte_dma_vchan_setup(dev_id, vchan, &qconf) != 0) {
+ printf("Error with queue configuration\n");
+ rte_panic();
}
- if (rte_rawdev_start(dev_id) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_start()\n");
+ rte_dma_info_get(dev_id, &info);
+ if (info.nb_vchans != 1) {
+ printf("Error, no configured queues reported on device id %u\n", dev_id);
+ rte_panic();
}
+ if (rte_dma_start(dev_id) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_start()\n");
}
/* >8 End of configuration of device. */
@@ -830,23 +798,18 @@ configure_rawdev_queue(uint32_t dev_id)
static void
assign_rawdevs(void)
{
- uint16_t nb_rawdev = 0, rdev_id = 0;
+ uint16_t nb_rawdev = 0;
+ int16_t rdev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- struct rte_rawdev_info rdev_info = { 0 };
-
- do {
- if (rdev_id == rte_rawdev_count())
- goto end;
- rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
- } while (rdev_info.driver_name == NULL ||
- strcmp(rdev_info.driver_name,
- IOAT_PMD_RAWDEV_NAME_STR) != 0);
-
- cfg.ports[i].ioat_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+ if (rdev_id == -1)
+ goto end;
+
+ cfg.ports[i].dmadev_ids[j] = rdev_id;
+ configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
+ rdev_id = rte_dma_next_dev(rdev_id + 1);
++nb_rawdev;
}
}
@@ -855,7 +818,7 @@ assign_rawdevs(void)
rte_exit(EXIT_FAILURE,
"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+ RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
}
/* >8 End of using IOAT rawdev API functions. */
@@ -1018,7 +981,7 @@ rawdev_dump(void)
for (i = 0; i < cfg.nb_ports; i++)
for (j = 0; j < cfg.ports[i].nb_queues; j++)
- rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+ rte_dma_dump(cfg.ports[i].dmadev_ids[j], stdout);
}
static void
@@ -1116,15 +1079,15 @@ main(int argc, char **argv)
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
if (ret != 0)
- RTE_LOG(ERR, IOAT, "rte_eth_dev_stop: err=%s, port=%u\n",
+ RTE_LOG(ERR, DMA, "rte_eth_dev_stop: err=%s, port=%u\n",
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
printf("Stopping rawdev %d\n",
- cfg.ports[i].ioat_ids[j]);
- rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j]);
+ rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
} else /* copy_mode == COPY_MODE_SW_NUM */
rte_ring_free(cfg.ports[i].rx_to_tx_ring);
diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build
index 68bce1ab03..c1dd7c9b29 100644
--- a/examples/ioat/meson.build
+++ b/examples/ioat/meson.build
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
+# Copyright(c) 2019-2021 Intel Corporation
# meson file, for building this example as part of a main DPDK build.
#
@@ -7,12 +7,8 @@
# DPDK instance, use 'make'
allow_experimental_apis = true
-build = dpdk_conf.has('RTE_RAW_IOAT')
-if not build
- subdir_done()
-endif
-deps += ['raw_ioat']
+deps += ['dmadev']
sources = files(
'ioatfwd.c',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 7/8] examples/ioat: update naming to match change to dmadev
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (5 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 189 ++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 95 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index f06d170789..90f5ecf507 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -53,13 +53,13 @@ struct rxtx_transmission_config {
/* >8 End of configuration of ports and number of assigned lcores. */
/* per-port statistics struct */
-struct ioat_port_statistics {
+struct dma_port_statistics {
uint64_t rx[RTE_MAX_ETHPORTS];
uint64_t tx[RTE_MAX_ETHPORTS];
uint64_t tx_dropped[RTE_MAX_ETHPORTS];
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
-struct ioat_port_statistics port_statistics;
+struct dma_port_statistics port_statistics;
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
@@ -72,14 +72,14 @@ struct total_statistics {
typedef enum copy_mode_t {
#define COPY_MODE_SW "sw"
COPY_MODE_SW_NUM,
-#define COPY_MODE_IOAT "hw"
- COPY_MODE_IOAT_NUM,
+#define COPY_MODE_DMA "hw"
+ COPY_MODE_DMA_NUM,
COPY_MODE_INVALID_NUM,
COPY_MODE_SIZE_NUM = COPY_MODE_INVALID_NUM
} copy_mode_t;
/* mask of enabled ports */
-static uint32_t ioat_enabled_port_mask;
+static uint32_t dma_enabled_port_mask;
/* number of RX queues per port */
static uint16_t nb_queues = 1;
@@ -88,9 +88,9 @@ static uint16_t nb_queues = 1;
static int mac_updating = 1;
/* hardare copy mode enabled by default. */
-static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
+static copy_mode_t copy_mode = COPY_MODE_DMA_NUM;
-/* size of IOAT rawdev ring for hardware copy mode or
+/* size of descriptor ring for hardware copy mode or
* rte_ring for software copy mode
*/
static unsigned short ring_size = 2048;
@@ -116,14 +116,14 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
-static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t dma_batch_sz = MAX_PKT_BURST;
static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
-static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr dma_ports_eth_addr[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
-struct rte_mempool *ioat_pktmbuf_pool;
+struct rte_mempool *dma_pktmbuf_pool;
/* Print out statistics for one port. */
static void
@@ -141,7 +141,7 @@ print_port_stats(uint16_t port_id)
port_statistics.copy_dropped[port_id]);
}
-/* Print out statistics for one IOAT rawdev device. */
+/* Print out statistics for one dmadev device. */
static void
print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
@@ -162,7 +162,7 @@ print_total_stats(struct total_statistics *ts)
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
"\nTotal completed ops: %19"PRIu64" [ops/s]"
"\nTotal failed ops: %22"PRIu64" [ops/s]",
@@ -196,7 +196,7 @@ print_stats(char *prgname)
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Copy Mode = %s,\n", copy_mode == COPY_MODE_SW_NUM ?
- COPY_MODE_SW : COPY_MODE_IOAT);
+ COPY_MODE_SW : COPY_MODE_DMA);
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Updating MAC = %s, ", mac_updating ?
@@ -235,7 +235,7 @@ print_stats(char *prgname)
delta_ts.total_packets_rx +=
port_statistics.rx[port_id];
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
@@ -286,7 +286,7 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
/* src addr */
- rte_ether_addr_copy(&ioat_ports_eth_addr[dest_portid], ð->s_addr);
+ rte_ether_addr_copy(&dma_ports_eth_addr[dest_portid], ð->s_addr);
}
/* Perform packet copy there is a user-defined function. 8< */
@@ -309,7 +309,7 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
@@ -335,7 +335,7 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t num, uint32_t step, uint16_t dev_id)
{
uint32_t i, k, m, n;
@@ -344,7 +344,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
for (i = 0; i < num; i += m) {
m = RTE_MIN(step, num - i);
- n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ n = dma_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
rte_dma_submit(dev_id, 0);
@@ -358,12 +358,12 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+dma_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
uint16_t nb_dq, filled;
- /* Dequeue the mbufs from IOAT device. Since all memory
+ /* Dequeue the mbufs from DMA device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
@@ -373,7 +373,7 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
if (unlikely(nb_dq == 0))
return nb_dq;
- /* Populate pkts_copy with the copies bufs from dma->copies */
+ /* Populate pkts_copy with the copies bufs from dma->copies for tx */
for (filled = 0; filled < nb_dq; filled++) {
src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
@@ -384,9 +384,9 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
}
-/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
+/* Receive packets on one port and enqueue to dmadev or rte_ring. 8< */
static void
-ioat_rx_port(struct rxtx_port_config *rx_config)
+dma_rx_port(struct rxtx_port_config *rx_config)
{
int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
@@ -403,7 +403,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ ret = rte_mempool_get_bulk(dma_pktmbuf_pool,
(void *)pkts_burst_copy, nb_rx);
if (unlikely(ret < 0))
@@ -414,17 +414,16 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pktmbuf_metadata_copy(pkts_burst[j],
pkts_burst_copy[j]);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
-
+ if (copy_mode == COPY_MODE_DMA_NUM) {
/* enqueue packets for hardware copy */
- nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
+ nb_enq = dma_enqueue(pkts_burst, pkts_burst_copy,
+ nb_rx, dma_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst[nb_enq],
nb_rx - nb_enq);
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -432,7 +431,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
/* get completed copies */
- nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ nb_rx = dma_dequeue(pkts_burst, pkts_burst_copy,
MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
@@ -441,14 +440,14 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pkts_burst_copy[j]);
}
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)pkts_burst, nb_rx);
nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
(void *)pkts_burst_copy, nb_rx, NULL);
/* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -456,11 +455,11 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
}
}
-/* >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
+/* >8 End of receive packets on one port and enqueue to dmadev or rte_ring. */
-/* Transmit packets from IOAT rawdev/rte_ring for one port. 8< */
+/* Transmit packets from dmadev/rte_ring for one port. 8< */
static void
-ioat_tx_port(struct rxtx_port_config *tx_config)
+dma_tx_port(struct rxtx_port_config *tx_config)
{
uint32_t i, j, nb_dq, nb_tx;
struct rte_mbuf *mbufs[MAX_PKT_BURST];
@@ -487,13 +486,13 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
-/* >8 End of transmitting packets from IOAT. */
+/* >8 End of transmitting packets from dmadev. */
-/* Main rx processing loop for IOAT rawdev. */
+/* Main rx processing loop for dmadev. */
static void
rx_main_loop(void)
{
@@ -505,7 +504,7 @@ rx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_rx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
}
/* Main tx processing loop for hardware copy. */
@@ -520,7 +519,7 @@ tx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_tx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
/* Main rx and tx loop if only one worker lcore available */
@@ -535,8 +534,8 @@ rxtx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++) {
- ioat_rx_port(&cfg.ports[i]);
- ioat_tx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
}
@@ -566,7 +565,7 @@ static void start_forwarding_cores(void)
/* Display usage */
static void
-ioat_usage(const char *prgname)
+dma_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
@@ -578,13 +577,13 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -s --ring-size RS: size of dmadev descriptor ring for hardware copy mode or rte_ring for software copy mode\n"
" -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
static int
-ioat_parse_portmask(const char *portmask)
+dma_parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
@@ -598,19 +597,19 @@ ioat_parse_portmask(const char *portmask)
}
static copy_mode_t
-ioat_parse_copy_mode(const char *copy_mode)
+dma_parse_copy_mode(const char *copy_mode)
{
if (strcmp(copy_mode, COPY_MODE_SW) == 0)
return COPY_MODE_SW_NUM;
- else if (strcmp(copy_mode, COPY_MODE_IOAT) == 0)
- return COPY_MODE_IOAT_NUM;
+ else if (strcmp(copy_mode, COPY_MODE_DMA) == 0)
+ return COPY_MODE_DMA_NUM;
return COPY_MODE_INVALID_NUM;
}
/* Parse the argument given in the command line of the application */
static int
-ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
+dma_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
"b:" /* dma batch size */
@@ -641,7 +640,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
int option_index;
char *prgname = argv[0];
- ioat_enabled_port_mask = default_port_mask;
+ dma_enabled_port_mask = default_port_mask;
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, short_options,
@@ -649,10 +648,10 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
switch (opt) {
case 'b':
- ioat_batch_sz = atoi(optarg);
- if (ioat_batch_sz > MAX_PKT_BURST) {
+ dma_batch_sz = atoi(optarg);
+ if (dma_batch_sz > MAX_PKT_BURST) {
printf("Invalid dma batch size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -660,19 +659,19 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
max_frame_size = atoi(optarg);
if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
printf("Invalid max frame size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
/* portmask */
case 'p':
- ioat_enabled_port_mask = ioat_parse_portmask(optarg);
- if (ioat_enabled_port_mask & ~default_port_mask ||
- ioat_enabled_port_mask <= 0) {
+ dma_enabled_port_mask = dma_parse_portmask(optarg);
+ if (dma_enabled_port_mask & ~default_port_mask ||
+ dma_enabled_port_mask <= 0) {
printf("Invalid portmask, %s, suggest 0x%x\n",
optarg, default_port_mask);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -682,16 +681,16 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
if (nb_queues == 0 || nb_queues > MAX_RX_QUEUES_COUNT) {
printf("Invalid RX queues number %s. Max %u\n",
optarg, MAX_RX_QUEUES_COUNT);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
case 'c':
- copy_mode = ioat_parse_copy_mode(optarg);
+ copy_mode = dma_parse_copy_mode(optarg);
if (copy_mode == COPY_MODE_INVALID_NUM) {
printf("Invalid copy type. Use: sw, hw\n");
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -700,7 +699,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ring_size = atoi(optarg);
if (ring_size == 0) {
printf("Invalid ring size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -718,7 +717,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
break;
default:
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
}
@@ -767,7 +766,7 @@ check_link_status(uint32_t port_mask)
/* Configuration of device. 8< */
static void
-configure_rawdev_queue(uint32_t dev_id)
+configure_dmadev_queue(uint32_t dev_id)
{
struct rte_dma_info info;
struct rte_dma_conf dev_config = { .nb_vchans = 1 };
@@ -794,33 +793,33 @@ configure_rawdev_queue(uint32_t dev_id)
}
/* >8 End of configuration of device. */
-/* Using IOAT rawdev API functions. 8< */
+/* Using dmadev API functions. 8< */
static void
-assign_rawdevs(void)
+assign_dmadevs(void)
{
- uint16_t nb_rawdev = 0;
- int16_t rdev_id = rte_dma_next_dev(0);
+ uint16_t nb_dmadev = 0;
+ int16_t dev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- if (rdev_id == -1)
+ if (dev_id == -1)
goto end;
- cfg.ports[i].dmadev_ids[j] = rdev_id;
- configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
- rdev_id = rte_dma_next_dev(rdev_id + 1);
- ++nb_rawdev;
+ cfg.ports[i].dmadev_ids[j] = dev_id;
+ configure_dmadev_queue(cfg.ports[i].dmadev_ids[j]);
+ dev_id = rte_dma_next_dev(dev_id + 1);
+ ++nb_dmadev;
}
}
end:
- if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+ if (nb_dmadev < cfg.nb_ports * cfg.ports[0].nb_queues)
rte_exit(EXIT_FAILURE,
- "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
- nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
+ "Not enough dmadevs (%u) for all queues (%u).\n",
+ nb_dmadev, cfg.nb_ports * cfg.ports[0].nb_queues);
+ RTE_LOG(INFO, DMA, "Number of used dmadevs: %u.\n", nb_dmadev);
}
-/* >8 End of using IOAT rawdev API functions. */
+/* >8 End of using dmadev API functions. */
/* Assign ring structures for packet exchanging. 8< */
static void
@@ -878,7 +877,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
}
/* Skip ports that are not enabled */
- if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
+ if ((dma_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
return;
}
@@ -905,7 +904,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ioat_ports_eth_addr[portid]);
+ rte_eth_macaddr_get(portid, &dma_ports_eth_addr[portid]);
/* Init RX queues */
rxq_conf = dev_info.default_rxconf;
@@ -964,7 +963,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
printf("Port %u, MAC address: " RTE_ETHER_ADDR_PRT_FMT "\n\n",
portid,
- RTE_ETHER_ADDR_BYTES(&ioat_ports_eth_addr[portid]));
+ RTE_ETHER_ADDR_BYTES(&dma_ports_eth_addr[portid]));
cfg.ports[cfg.nb_ports].rxtx_port = portid;
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
@@ -972,11 +971,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
/* Get a device dump for each device being used by the application */
static void
-rawdev_dump(void)
+dmadev_dump(void)
{
uint32_t i, j;
- if (copy_mode != COPY_MODE_IOAT_NUM)
+ if (copy_mode != COPY_MODE_DMA_NUM)
return;
for (i = 0; i < cfg.nb_ports; i++)
@@ -992,7 +991,7 @@ signal_handler(int signum)
signum);
force_quit = true;
} else if (signum == SIGUSR1) {
- rawdev_dump();
+ dmadev_dump();
}
}
@@ -1023,9 +1022,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* Parse application arguments (after the EAL ones) */
- ret = ioat_parse_args(argc, argv, nb_ports);
+ ret = dma_parse_args(argc, argv, nb_ports);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid IOAT arguments\n");
+ rte_exit(EXIT_FAILURE, "Invalid DMA arguments\n");
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
@@ -1036,23 +1035,23 @@ main(int argc, char **argv)
/* Create the mbuf pool */
sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
- ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ dma_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
- if (ioat_pktmbuf_pool == NULL)
+ if (dma_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
/* Initialize each port. 8< */
cfg.nb_ports = 0;
RTE_ETH_FOREACH_DEV(portid)
- port_init(portid, ioat_pktmbuf_pool, nb_queues);
+ port_init(portid, dma_pktmbuf_pool, nb_queues);
/* >8 End of initializing each port. */
/* Initialize port xstats */
memset(&port_statistics, 0, sizeof(port_statistics));
/* Assigning each port resources. 8< */
- while (!check_link_status(ioat_enabled_port_mask) && !force_quit)
+ while (!check_link_status(dma_enabled_port_mask) && !force_quit)
sleep(1);
/* Check if there is enough lcores for all ports. */
@@ -1061,8 +1060,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE,
"There should be at least one worker lcore.\n");
- if (copy_mode == COPY_MODE_IOAT_NUM)
- assign_rawdevs();
+ if (copy_mode == COPY_MODE_DMA_NUM)
+ assign_dmadevs();
assign_rings();
/* >8 End of assigning each port resources. */
@@ -1083,9 +1082,9 @@ main(int argc, char **argv)
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- printf("Stopping rawdev %d\n",
+ printf("Stopping dmadev %d\n",
cfg.ports[i].dmadev_ids[j]);
rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v3 8/8] examples/ioat: rename application to dmafwd
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
` (6 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-09-28 16:29 ` Kevin Laatz
7 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-09-28 16:29 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
v3: fix api names after prefix renaming
---
.../sample_app_ug/{ioat.rst => dma.rst} | 102 +++++++++---------
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 0
examples/{ioat => dma}/meson.build | 2 +-
examples/meson.build | 2 +-
7 files changed, 58 insertions(+), 58 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (75%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (100%)
rename examples/{ioat => dma}/meson.build (94%)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/dma.rst
similarity index 75%
rename from doc/guides/sample_app_ug/ioat.rst
rename to doc/guides/sample_app_ug/dma.rst
index 1edad3f9ac..4b8e607774 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/dma.rst
@@ -1,17 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2019 Intel Corporation.
+ Copyright(c) 2019-2021 Intel Corporation.
.. include:: <isonum.txt>
-Packet copying using Intel\ |reg| QuickData Technology
-======================================================
+Packet copying using DMAdev library
+===================================
Overview
--------
This sample is intended as a demonstration of the basic components of a DPDK
-forwarding application and example of how to use IOAT driver API to make
-packets copies.
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
Also while forwarding, the MAC addresses are affected as follows:
@@ -29,7 +29,7 @@ Compiling the Application
To compile the sample application see :doc:`compiling`.
-The application is located in the ``ioat`` sub-directory.
+The application is located in the ``dma`` sub-directory.
Running the Application
@@ -38,8 +38,8 @@ Running the Application
In order to run the hardware copy application, the copying device
needs to be bound to user-space IO driver.
-Refer to the "IOAT Rawdev Driver" chapter in the "Rawdev Drivers" document
-for information on using the driver.
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
The application requires a number of command line options:
@@ -52,13 +52,13 @@ where,
* p MASK: A hexadecimal bitmask of the ports to configure (default is all)
-* q NQ: Number of Rx queues used per port equivalent to CBDMA channels
+* q NQ: Number of Rx queues used per port equivalent to DMA channels
per port (default is 1)
* c CT: Performed packet copy type: software (sw) or hardware using
DMA (hw) (default is hw)
-* s RS: Size of IOAT rawdev ring for hardware copy mode or rte_ring for
+* s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
software copy mode (default is 2048)
* --[no-]mac-updating: Whether MAC address of packets should be changed
@@ -87,7 +87,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
To run the application in a Linux environment with 2 lcores (the main lcore,
plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -95,7 +95,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
Refer to the *DPDK Getting Started Guide* for general information on
running applications and the Environment Abstraction Layer (EAL) options.
@@ -120,7 +120,7 @@ The first task is to initialize the Environment Abstraction Layer (EAL).
The ``argc`` and ``argv`` arguments are provided to the ``rte_eal_init()``
function. The value returned is the number of parsed arguments:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Init EAL. 8<
:end-before: >8 End of init EAL.
@@ -130,7 +130,7 @@ function. The value returned is the number of parsed arguments:
The ``main()`` also allocates a mempool to hold the mbufs (Message Buffers)
used by the application:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Allocates mempool to hold the mbufs. 8<
:end-before: >8 End of allocates mempool to hold the mbufs.
@@ -141,7 +141,7 @@ detail in the "Mbuf Library" section of the *DPDK Programmer's Guide*.
The ``main()`` function also initializes the ports:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Initialize each port. 8<
:end-before: >8 End of initializing each port.
@@ -151,9 +151,9 @@ Each port is configured using ``port_init()`` function. The Ethernet
ports are configured with local settings using the ``rte_eth_dev_configure()``
function and the ``port_conf`` struct. The RSS is enabled so that
multiple Rx queues could be used for packet receiving and copying by
-multiple CBDMA channels per port:
+multiple DMA channels per port:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring port to use RSS for multiple RX queues. 8<
:end-before: >8 End of configuring port to use RSS for multiple RX queues.
@@ -165,7 +165,7 @@ and ``rte_eth_tx_queue_setup()`` functions.
The Ethernet port is then started:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start device. 8<
:end-before: >8 End of starting device.
@@ -174,7 +174,7 @@ The Ethernet port is then started:
Finally the Rx port is set in promiscuous mode:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: RX port is set in promiscuous mode. 8<
:end-before: >8 End of RX port is set in promiscuous mode.
@@ -183,7 +183,7 @@ Finally the Rx port is set in promiscuous mode:
After that each port application assigns resources needed.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assigning each port resources. 8<
:end-before: >8 End of assigning each port resources.
@@ -192,30 +192,30 @@ After that each port application assigns resources needed.
Ring structures are assigned for exchanging packets between lcores for both SW
and HW copy modes.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assign ring structures for packet exchanging. 8<
:end-before: >8 End of assigning ring structures for packet exchanging.
:dedent: 0
-When using hardware copy each Rx queue of the port is assigned an
-IOAT device (``assign_rawdevs()``) using IOAT Rawdev Driver API
-functions:
+When using hardware copy each Rx queue of the port is assigned a DMA device
+(``assign_dmadevs()``) using DMAdev library API functions:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Using IOAT rawdev API functions. 8<
- :end-before: >8 End of using IOAT rawdev API functions.
+ :start-after: Using dmadev API functions. 8<
+ :end-before: >8 End of using dmadev API functions.
:dedent: 0
-The initialization of hardware device is done by ``rte_rawdev_configure()``
-function using ``rte_rawdev_info`` struct. After configuration the device is
-started using ``rte_rawdev_start()`` function. Each of the above operations
-is done in ``configure_rawdev_queue()``.
+The initialization of hardware device is done by ``rte_dma_configure()`` and
+``rte_dma_vchan_setup()`` functions using the ``rte_dma_conf`` and
+``rte_dma_vchan_conf`` structs. After configuration the device is started
+using ``rte_dma_start()`` function. Each of the above operations is done in
+``configure_dmadev_queue()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuration of device. 8<
:end-before: >8 End of configuration of device.
@@ -237,7 +237,7 @@ The Lcores Launching Functions
As described above, ``main()`` function invokes ``start_forwarding_cores()``
function in order to start processing for each lcore:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start processing for each lcore. 8<
:end-before: >8 End of starting to processfor each lcore.
@@ -248,7 +248,7 @@ using ``rte_eal_remote_launch()``. The configured ports, their number
and number of assigned lcores are stored in user-defined
``rxtx_transmission_config`` struct:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring ports and number of assigned lcores in struct. 8<
:end-before: >8 End of configuration of ports and number of assigned lcores.
@@ -260,32 +260,32 @@ corresponding to ports and lcores configuration provided by the user.
The Lcores Processing Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For receiving packets on each port, the ``ioat_rx_port()`` function is used.
+For receiving packets on each port, the ``dma_rx_port()`` function is used.
The function receives packets on each configured Rx queue. Depending on the
-mode the user chose, it will enqueue packets to IOAT rawdev channels and
+mode the user chose, it will enqueue packets to DMA channels and
then invoke copy process (hardware copy), or perform software copy of each
packet using ``pktmbuf_sw_copy()`` function and enqueue them to an rte_ring:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
The packets are received in burst mode using ``rte_eth_rx_burst()``
function. When using hardware copy mode the packets are enqueued in
-copying device's buffer using ``ioat_enqueue_packets()`` which calls
-``rte_ioat_enqueue_copy()``. When all received packets are in the
-buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
-Function ``rte_ioat_enqueue_copy()`` operates on physical address of
+copying device's buffer using ``dma_enqueue_packets()`` which calls
+``rte_dma_copy()``. When all received packets are in the
+buffer the copy operations are started by calling ``rte_dma_submit()``.
+Function ``rte_dma_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
used to get the address of the start of the data within the mbuf.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
@@ -293,15 +293,15 @@ Once the copies have been completed (this includes gathering the completions in
HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
is used to pass the packets to the TX function.
-All completed copies are processed by ``ioat_tx_port()`` function. This function
+All completed copies are processed by ``dma_tx_port()`` function. This function
dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Transmit packets from IOAT rawdev/rte_ring for one port. 8<
- :end-before: >8 End of transmitting packets from IOAT.
+ :start-after: Transmit packets from dmadev/rte_ring for one port. 8<
+ :end-before: >8 End of transmitting packets from dmadev.
:dedent: 0
The Packet Copying Functions
@@ -311,7 +311,7 @@ In order to perform SW packet copy, there are user-defined functions to first co
the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
(``pktmbuf_sw_copy()``):
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Perform packet copy there is a user-defined function. 8<
:end-before: >8 End of perform packet copy there is a user-defined function.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index e8db83d3a7..8835dd03ac 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -22,7 +22,7 @@ Sample Applications User Guides
ip_reassembly
kernel_nic_interface
keep_alive
- ioat
+ dma
l2_forward_crypto
l2_forward_job_stats
l2_forward_real_virtual
diff --git a/doc/guides/sample_app_ug/intro.rst b/doc/guides/sample_app_ug/intro.rst
index 8ff223b16c..e765f1fd6b 100644
--- a/doc/guides/sample_app_ug/intro.rst
+++ b/doc/guides/sample_app_ug/intro.rst
@@ -58,8 +58,8 @@ examples are highlighted below.
forwarding Graph, or ``l3fwd_graph`` application does forwarding based on IPv4
like a simple router with DPDK Graph framework.
-* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
- or ``ioatfwd`` application demonstrates how to use IOAT rawdev driver for
+* :doc:`Hardware packet copying<dma>`: The Hardware packet copying,
+ or ``dmafwd`` application demonstrates how to use DMAdev library for
copying packets between two threads.
* :doc:`Packet Distributor<dist_app>`: The Packet Distributor
diff --git a/examples/ioat/Makefile b/examples/dma/Makefile
similarity index 97%
rename from examples/ioat/Makefile
rename to examples/dma/Makefile
index 178fc8778c..59af6478b7 100644
--- a/examples/ioat/Makefile
+++ b/examples/dma/Makefile
@@ -2,10 +2,10 @@
# Copyright(c) 2019 Intel Corporation
# binary name
-APP = ioatfwd
+APP = dmafwd
# all source are stored in SRCS-y
-SRCS-y := ioatfwd.c
+SRCS-y := dmafwd.c
PKGCONF ?= pkg-config
diff --git a/examples/ioat/ioatfwd.c b/examples/dma/dmafwd.c
similarity index 100%
rename from examples/ioat/ioatfwd.c
rename to examples/dma/dmafwd.c
diff --git a/examples/ioat/meson.build b/examples/dma/meson.build
similarity index 94%
rename from examples/ioat/meson.build
rename to examples/dma/meson.build
index c1dd7c9b29..9fdcad660e 100644
--- a/examples/ioat/meson.build
+++ b/examples/dma/meson.build
@@ -11,5 +11,5 @@ allow_experimental_apis = true
deps += ['dmadev']
sources = files(
- 'ioatfwd.c',
+ 'dmafwd.c',
)
diff --git a/examples/meson.build b/examples/meson.build
index 07e682401b..d50f09db12 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -12,13 +12,13 @@ all_examples = [
'bond',
'cmdline',
'distributor',
+ 'dma',
'ethtool',
'eventdev_pipeline',
'fips_validation',
'flow_classify',
'flow_filtering',
'helloworld',
- 'ioat',
'ip_fragmentation',
'ip_pipeline',
'ip_reassembly',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
@ 2021-09-29 10:32 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-29 10:32 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen
On 28/09/2021 17:29, Kevin Laatz wrote:
> Add a command line option to control the interval between stats prints.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
@ 2021-09-29 10:33 ` Conor Walsh
0 siblings, 0 replies; 63+ messages in thread
From: Conor Walsh @ 2021-09-29 10:33 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, fengchengwen
On 28/09/2021 17:29, Kevin Laatz wrote:
> Enable dumping device info via the signal handler. With this change, when a
> SIGUSR1 is issued, the application will print a dump of all devices being
> used by the application.
>
> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
> ---
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (7 preceding siblings ...)
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
` (9 more replies)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
9 siblings, 10 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
This patchset first adds some additional command line options to the
existing ioatfwd application to enhance usability.
The last 3 patches of this set then port the ioatfwd application to use the
dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
all variables etc are renamed to be more appropriate for using with the
DMAdev library. Lastly, the application itself is renamed to "dmafwd".
Depends-on: series-19594 ("support dmadev")
---
v4:
- rebase on dmadev lib v26 patchset
v3:
- add signal-triggered device dump
- add cmd line option to control stats print frequency
- documentation updates
- small miscellaneous changes from review feedback
Kevin Laatz (5):
examples/ioat: add cmd line option to control stats print interval
examples/ioat: add signal-triggered device dumps
examples/ioat: port application to dmadev APIs
examples/ioat: update naming to match change to dmadev
examples/ioat: rename application to dmafwd
Konstantin Ananyev (3):
examples/ioat: always use same lcore for both DMA requests enqueue and
dequeue
examples/ioat: add cmd line option to control DMA batch size
examples/ioat: add cmd line option to control max frame size
.../sample_app_ug/{ioat.rst => dma.rst} | 149 ++---
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 632 ++++++++++--------
examples/{ioat => dma}/meson.build | 10 +-
examples/meson.build | 2 +-
7 files changed, 427 insertions(+), 376 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
rename examples/{ioat => dma}/meson.build (63%)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
` (8 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Documentation updates to reflect these changes are also included.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 39 +++----
examples/ioat/ioatfwd.c | 185 ++++++++++++++++--------------
2 files changed, 117 insertions(+), 107 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index ee0a627b06..2e9d3d6258 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -183,10 +183,8 @@ After that each port application assigns resources needed.
:end-before: >8 End of assigning each port resources.
:dedent: 1
-Depending on mode set (whether copy should be done by software or by hardware)
-special structures are assigned to each port. If software copy was chosen,
-application have to assign ring structures for packet exchanging between lcores
-assigned to ports.
+Ring structures are assigned for exchanging packets between lcores for both SW
+and HW copy modes.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -275,12 +273,8 @@ copying device's buffer using ``ioat_enqueue_packets()`` which calls
buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
Function ``rte_ioat_enqueue_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
-start of the data buffer (``buf_iova``). Thus the address is adjusted
-by ``addr_offset`` value in order to get the address of ``rearm_data``
-member of ``rte_mbuf``. That way both the packet data and metadata can
-be copied in a single operation. This method can be used because the mbufs
-are direct mbufs allocated by the apps. If another app uses external buffers,
-or indirect mbufs, then multiple copy operations must be used.
+start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
+used to get the address of the start of the data within the mbuf.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -289,12 +283,13 @@ or indirect mbufs, then multiple copy operations must be used.
:dedent: 0
-All completed copies are processed by ``ioat_tx_port()`` function. When using
-hardware copy mode the function invokes ``rte_ioat_completed_ops()``
-on each assigned IOAT channel to gather copied packets. If software copy
-mode is used the function dequeues copied packets from the rte_ring. Then each
-packet MAC address is changed if it was enabled. After that copies are sent
-in burst mode using `` rte_eth_tx_burst()``.
+Once the copies have been completed (this includes gathering the completions in
+HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
+is used to pass the packets to the TX function.
+
+All completed copies are processed by ``ioat_tx_port()`` function. This function
+dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
+if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
@@ -306,11 +301,9 @@ in burst mode using `` rte_eth_tx_burst()``.
The Packet Copying Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-In order to perform packet copy there is a user-defined function
-``pktmbuf_sw_copy()`` used. It copies a whole packet by copying
-metadata from source packet to new mbuf, and then copying a data
-chunk of source packet. Both memory copies are done using
-``rte_memcpy()``:
+In order to perform SW packet copy, there are user-defined functions to first copy
+the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
+(``pktmbuf_sw_copy()``):
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -318,8 +311,8 @@ chunk of source packet. Both memory copies are done using
:end-before: >8 End of perform packet copy there is a user-defined function.
:dedent: 0
-The metadata in this example is copied from ``rearm_data`` member of
-``rte_mbuf`` struct up to ``cacheline1``.
+The metadata in this example is copied from ``rx_descriptor_fields1`` marker of
+``rte_mbuf`` struct up to ``buf_len`` member.
In order to understand why software packet copying is done as shown
above please refer to the "Mbuf Library" section of the
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index ff36aa7f1e..bf12bb9ba9 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
/* Perform packet copy there is a user-defined function. 8< */
static inline void
-pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
{
- /* Copy packet metadata */
- rte_memcpy(&dst->rearm_data,
- &src->rearm_data,
- offsetof(struct rte_mbuf, cacheline1)
- - offsetof(struct rte_mbuf, rearm_data));
+ dst->data_off = src->data_off;
+ memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
+ offsetof(struct rte_mbuf, buf_len) -
+ offsetof(struct rte_mbuf, rx_descriptor_fields1));
+}
- /* Copy packet data */
+/* Copy packet data */
+static inline void
+pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+{
rte_memcpy(rte_pktmbuf_mtod(dst, char *),
rte_pktmbuf_mtod(src, char *), src->data_len);
}
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf **pkts,
+ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
int ret;
uint32_t i;
- struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
-
- const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
- &pkts[0]->rearm_data);
-
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_copy, nb_rx);
-
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
ret = rte_ioat_enqueue_copy(dev_id,
- pkts[i]->buf_iova - addr_offset,
- pkts_copy[i]->buf_iova - addr_offset,
- rte_pktmbuf_data_len(pkts[i]) + addr_offset,
+ rte_pktmbuf_iova(pkts[i]),
+ rte_pktmbuf_iova(pkts_copy[i]),
+ rte_pktmbuf_data_len(pkts[i]),
(uintptr_t)pkts[i],
(uintptr_t)pkts_copy[i]);
@@ -376,20 +369,50 @@ ioat_enqueue_packets(struct rte_mbuf **pkts,
}
ret = i;
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
- nb_rx - i);
-
return ret;
}
+static inline uint32_t
+ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+ uint32_t num, uint16_t dev_id)
+{
+ uint32_t n;
+
+ n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
+
+ return n;
+}
+
+static inline uint32_t
+ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+ uint16_t dev_id)
+{
+ int32_t rc;
+ /* Dequeue the mbufs from IOAT device. Since all memory
+ * is DPDK pinned memory and therefore all addresses should
+ * be valid, we don't check for copy errors
+ */
+ rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
+ (void *)src, (void *)dst);
+ if (rc < 0) {
+ RTE_LOG(CRIT, IOAT,
+ "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
+ dev_id, rte_errno);
+ rc = 0;
+ }
+ return rc;
+}
+
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
static void
ioat_rx_port(struct rxtx_port_config *rx_config)
{
+ int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
for (i = 0; i < rx_config->nb_queues; i++) {
@@ -401,40 +424,54 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
+ ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst_copy, nb_rx);
+
+ if (unlikely(ret < 0))
+ rte_exit(EXIT_FAILURE,
+ "Unable to allocate memory.\n");
+
+ for (j = 0; j < nb_rx; j++)
+ pktmbuf_metadata_copy(pkts_burst[j],
+ pkts_burst_copy[j]);
+
if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Perform packet hardware copy */
- nb_enq = ioat_enqueue_packets(pkts_burst,
+
+ /* enqueue packets for hardware copy */
+ nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
nb_rx, rx_config->ioat_ids[i]);
- if (nb_enq > 0)
- rte_ioat_perform_ops(rx_config->ioat_ids[i]);
- } else {
- /* Perform packet software copy, free source packets */
- int ret;
- struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst_copy, nb_rx);
+ /* free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst[nb_enq],
+ nb_rx - nb_enq);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE,
- "Unable to allocate memory.\n");
+ port_statistics.copy_dropped[rx_config->rxtx_port] +=
+ (nb_rx - nb_enq);
+ /* get completed copies */
+ nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ } else {
+ /* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
pktmbuf_sw_copy(pkts_burst[j],
pkts_burst_copy[j]);
+ }
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst, nb_rx);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst, nb_rx);
- nb_enq = rte_ring_enqueue_burst(
- rx_config->rx_to_tx_ring,
- (void *)pkts_burst_copy, nb_rx, NULL);
+ nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
+ (void *)pkts_burst_copy, nb_rx, NULL);
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&pkts_burst_copy[nb_enq],
- nb_rx - nb_enq);
- }
+ /* Free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
port_statistics.copy_dropped[rx_config->rxtx_port] +=
(nb_rx - nb_enq);
@@ -446,51 +483,33 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
static void
ioat_tx_port(struct rxtx_port_config *tx_config)
{
- uint32_t i, j, nb_dq = 0;
- struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
- struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
+ uint32_t i, j, nb_dq, nb_tx;
+ struct rte_mbuf *mbufs[MAX_PKT_BURST];
for (i = 0; i < tx_config->nb_queues; i++) {
- if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Dequeue the mbufs from IOAT device. Since all memory
- * is DPDK pinned memory and therefore all addresses should
- * be valid, we don't check for copy errors
- */
- nb_dq = rte_ioat_completed_ops(
- tx_config->ioat_ids[i], MAX_PKT_BURST, NULL, NULL,
- (void *)mbufs_src, (void *)mbufs_dst);
- } else {
- /* Dequeue the mbufs from rx_to_tx_ring. */
- nb_dq = rte_ring_dequeue_burst(
- tx_config->rx_to_tx_ring, (void *)mbufs_dst,
- MAX_PKT_BURST, NULL);
- }
-
- if ((int32_t) nb_dq <= 0)
- return;
- if (copy_mode == COPY_MODE_IOAT_NUM)
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)mbufs_src, nb_dq);
+ /* Dequeue the mbufs from rx_to_tx_ring. */
+ nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+ (void *)mbufs, MAX_PKT_BURST, NULL);
+ if (nb_dq == 0)
+ continue;
/* Update macs if enabled */
if (mac_updating) {
for (j = 0; j < nb_dq; j++)
- update_mac_addrs(mbufs_dst[j],
+ update_mac_addrs(mbufs[j],
tx_config->rxtx_port);
}
- const uint16_t nb_tx = rte_eth_tx_burst(
- tx_config->rxtx_port, 0,
- (void *)mbufs_dst, nb_dq);
+ nb_tx = rte_eth_tx_burst(tx_config->rxtx_port, 0,
+ (void *)mbufs, nb_dq);
port_statistics.tx[tx_config->rxtx_port] += nb_tx;
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&mbufs_dst[nb_tx],
- nb_dq - nb_tx);
+ (void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
/* >8 End of transmitting packets from IOAT. */
@@ -853,9 +872,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
- if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- DEV_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, nb_queues, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device:"
@@ -974,7 +990,8 @@ main(int argc, char **argv)
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
- 4 * MAX_PKT_BURST) + rte_lcore_count() * MEMPOOL_CACHE_SIZE),
+ 4 * MAX_PKT_BURST + ring_size) + ring_size +
+ rte_lcore_count() * MEMPOOL_CACHE_SIZE),
MIN_POOL_SIZE);
/* Create the mbuf pool */
@@ -1006,8 +1023,8 @@ main(int argc, char **argv)
if (copy_mode == COPY_MODE_IOAT_NUM)
assign_rawdevs();
- else /* copy_mode == COPY_MODE_SW_NUM */
- assign_rings();
+
+ assign_rings();
/* >8 End of assigning each port resources. */
start_forwarding_cores();
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 2/8] examples/ioat: add cmd line option to control DMA batch size
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
` (7 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 40 ++++++++++++++++++++++++-------
2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 2e9d3d6258..404ca2e19a 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating]
+ [--[no-]mac-updating] [-b BS]
where,
@@ -64,6 +64,8 @@ where,
* --[no-]mac-updating: Whether MAC address of packets should be changed
or not (default is mac-updating)
+* b BS: set the DMA batch size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index bf12bb9ba9..e73d79271b 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -24,6 +24,7 @@
#define CMD_LINE_OPT_NB_QUEUE "nb-queue"
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
+#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -102,6 +103,8 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
+static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -374,15 +377,25 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
static inline uint32_t
ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
- uint32_t num, uint16_t dev_id)
+ uint32_t num, uint32_t step, uint16_t dev_id)
{
- uint32_t n;
+ uint32_t i, k, m, n;
+
+ k = 0;
+ for (i = 0; i < num; i += m) {
+
+ m = RTE_MIN(step, num - i);
+ n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ k += n;
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
- n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
- if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ /* don't try to enqueue more if HW queue is full */
+ if (n != m)
+ break;
+ }
- return n;
+ return k;
}
static inline uint32_t
@@ -439,7 +452,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -590,6 +603,7 @@ static void
ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -b --dma-batch-size: number of requests per DMA batch\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -631,9 +645,10 @@ static int
ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
+ "b:" /* dma batch size */
+ "c:" /* copy type (sw|hw) */
"p:" /* portmask */
"q:" /* number of RX queues per port */
- "c:" /* copy type (sw|hw) */
"s:" /* ring size */
;
@@ -644,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_NB_QUEUE, required_argument, NULL, 'q'},
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
+ {CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{NULL, 0, 0, 0}
};
@@ -660,6 +676,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
lgopts, &option_index)) != EOF) {
switch (opt) {
+ case 'b':
+ ioat_batch_sz = atoi(optarg);
+ if (ioat_batch_sz > MAX_PKT_BURST) {
+ printf("Invalid dma batch size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 3/8] examples/ioat: add cmd line option to control max frame size
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
` (6 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev
Cc: bruce.richardson, fengchengwen, conor.walsh, Konstantin Ananyev,
Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 25 +++++++++++++++++++++++--
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 404ca2e19a..127129dd4b 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS]
+ [--[no-]mac-updating] [-b BS] [-f FS]
where,
@@ -66,6 +66,8 @@ where,
* b BS: set the DMA batch size
+* f FS: set the max frame size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index e73d79271b..04ed175432 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -25,6 +25,7 @@
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
+#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -104,6 +105,7 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -604,6 +606,7 @@ ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
+ " -f --max-frame-size: max frame size\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -647,6 +650,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
static const char short_options[] =
"b:" /* dma batch size */
"c:" /* copy type (sw|hw) */
+ "f:" /* max frame size */
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
@@ -660,6 +664,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
+ {CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
{NULL, 0, 0, 0}
};
@@ -684,6 +689,15 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
return -1;
}
break;
+ case 'f':
+ max_frame_size = atoi(optarg);
+ if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
+ printf("Invalid max frame size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
+
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
@@ -880,6 +894,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
struct rte_eth_dev_info dev_info;
int ret, i;
+ if (max_frame_size > local_port_conf.rxmode.max_rx_pkt_len) {
+ local_port_conf.rxmode.max_rx_pkt_len = max_frame_size;
+ local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+
/* Skip ports that are not enabled */
if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@@ -990,6 +1009,7 @@ main(int argc, char **argv)
uint16_t nb_ports, portid;
uint32_t i;
unsigned int nb_mbufs;
+ size_t sz;
/* Init EAL. 8< */
ret = rte_eal_init(argc, argv);
@@ -1019,9 +1039,10 @@ main(int argc, char **argv)
MIN_POOL_SIZE);
/* Create the mbuf pool */
+ sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
+ sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
- MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
+ MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
if (ioat_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 4/8] examples/ioat: add cmd line option to control stats print interval
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (2 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
` (5 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 31 +++++++++++++++++++++++--------
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 127129dd4b..1edad3f9ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS] [-f FS]
+ [--[no-]mac-updating] [-b BS] [-f FS] [-i SI]
where,
@@ -68,6 +68,8 @@ where,
* f FS: set the max frame size
+* i SI: set the interval, in second, between statistics prints (default is 1)
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 04ed175432..8c4920b798 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -26,6 +26,7 @@
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
+#define CMD_LINE_OPT_STATS_INTERVAL "stats-interval"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -95,6 +96,9 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
*/
static unsigned short ring_size = 2048;
+/* interval, in seconds, between stats prints */
+static unsigned short stats_interval = 1;
+
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -152,15 +156,15 @@ print_total_stats(struct total_statistics *ts)
"\nTotal packets Tx: %24"PRIu64" [pps]"
"\nTotal packets Rx: %24"PRIu64" [pps]"
"\nTotal packets dropped: %19"PRIu64" [pps]",
- ts->total_packets_tx,
- ts->total_packets_rx,
- ts->total_packets_dropped);
+ ts->total_packets_tx / stats_interval,
+ ts->total_packets_rx / stats_interval,
+ ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
"\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues,
- ts->total_failed_enqueues);
+ ts->total_successful_enqueues / stats_interval,
+ ts->total_failed_enqueues / stats_interval);
}
printf("\n====================================================\n");
@@ -248,10 +252,10 @@ print_stats(char *prgname)
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
- /* Sleep for 1 second each round - init sleep allows reading
+ /* Sleep for "stats_interval" seconds each round - init sleep allows reading
* messages from app startup.
*/
- sleep(1);
+ sleep(stats_interval);
/* Clear screen and move to top left */
printf("%s%s", clr, topLeft);
@@ -614,7 +618,8 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+ " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
@@ -654,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
+ "i:" /* interval, in seconds, between stats prints */
;
static const struct option lgopts[] = {
@@ -665,6 +671,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
+ {CMD_LINE_OPT_STATS_INTERVAL, required_argument, NULL, 'i'},
{NULL, 0, 0, 0}
};
@@ -738,6 +745,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
}
break;
+ case 'i':
+ stats_interval = atoi(optarg);
+ if (stats_interval == 0) {
+ printf("Invalid stats interval, setting to 1\n");
+ stats_interval = 1; /* set to default */
+ }
+ break;
+
/* long options */
case 0:
break;
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 5/8] examples/ioat: add signal-triggered device dumps
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (3 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
` (4 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Enable dumping device info via the signal handler. With this change, when a
SIGUSR1 is issued, the application will print a dump of all devices being
used by the application.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 8c4920b798..8bb69c1c14 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1007,6 +1007,20 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
}
+/* Get a device dump for each device being used by the application */
+static void
+rawdev_dump(void)
+{
+ uint32_t i, j;
+
+ if (copy_mode != COPY_MODE_IOAT_NUM)
+ return;
+
+ for (i = 0; i < cfg.nb_ports; i++)
+ for (j = 0; j < cfg.ports[i].nb_queues; j++)
+ rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+}
+
static void
signal_handler(int signum)
{
@@ -1014,6 +1028,8 @@ signal_handler(int signum)
printf("\n\nSignal %d received, preparing to exit...\n",
signum);
force_quit = true;
+ } else if (signum == SIGUSR1) {
+ rawdev_dump();
}
}
@@ -1037,6 +1053,7 @@ main(int argc, char **argv)
force_quit = false;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
+ signal(SIGUSR1, signal_handler);
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 6/8] examples/ioat: port application to dmadev APIs
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (4 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
` (3 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
v4: update macro name after rebasing
---
examples/ioat/ioatfwd.c | 247 ++++++++++++++++----------------------
examples/ioat/meson.build | 8 +-
2 files changed, 107 insertions(+), 148 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 8bb69c1c14..5f3564af30 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019-2021 Intel Corporation
*/
#include <stdint.h>
@@ -10,11 +10,10 @@
#include <rte_malloc.h>
#include <rte_ethdev.h>
-#include <rte_rawdev.h>
-#include <rte_ioat_rawdev.h>
+#include <rte_dmadev.h>
/* size of ring used for software copying between rx and tx. */
-#define RTE_LOGTYPE_IOAT RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_DMA RTE_LOGTYPE_USER1
#define MAX_PKT_BURST 32
#define MEMPOOL_CACHE_SIZE 512
#define MIN_POOL_SIZE 65536U
@@ -41,8 +40,8 @@ struct rxtx_port_config {
uint16_t nb_queues;
/* for software copy mode */
struct rte_ring *rx_to_tx_ring;
- /* for IOAT rawdev copy mode */
- uint16_t ioat_ids[MAX_RX_QUEUES_COUNT];
+ /* for dmadev HW copy mode */
+ uint16_t dmadev_ids[MAX_RX_QUEUES_COUNT];
};
/* Configuring ports and number of assigned lcores in struct. 8< */
@@ -61,13 +60,13 @@ struct ioat_port_statistics {
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
struct ioat_port_statistics port_statistics;
-
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
uint64_t total_packets_rx;
- uint64_t total_successful_enqueues;
- uint64_t total_failed_enqueues;
+ uint64_t total_submitted;
+ uint64_t total_completed;
+ uint64_t total_failed;
};
typedef enum copy_mode_t {
@@ -98,6 +97,15 @@ static unsigned short ring_size = 2048;
/* interval, in seconds, between stats prints */
static unsigned short stats_interval = 1;
+/* global mbuf arrays for tracking DMA bufs */
+#define MBUF_RING_SIZE 2048
+#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
+struct dma_bufs {
+ struct rte_mbuf *bufs[MBUF_RING_SIZE];
+ struct rte_mbuf *copies[MBUF_RING_SIZE];
+ uint16_t sent;
+};
+static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX];
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -135,36 +143,32 @@ print_port_stats(uint16_t port_id)
/* Print out statistics for one IOAT rawdev device. */
static void
-print_rawdev_stats(uint32_t dev_id, uint64_t *xstats,
- unsigned int *ids_xstats, uint16_t nb_xstats,
- struct rte_rawdev_xstats_name *names_xstats)
+print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
- uint16_t i;
-
- printf("\nIOAT channel %u", dev_id);
- for (i = 0; i < nb_xstats; i++)
- printf("\n\t %s: %*"PRIu64,
- names_xstats[ids_xstats[i]].name,
- (int)(37 - strlen(names_xstats[ids_xstats[i]].name)),
- xstats[i]);
+ printf("\nDMA channel %u", dev_id);
+ printf("\n\t Total submitted ops: %"PRIu64"", stats.submitted);
+ printf("\n\t Total completed ops: %"PRIu64"", stats.completed);
+ printf("\n\t Total failed ops: %"PRIu64"", stats.errors);
}
static void
print_total_stats(struct total_statistics *ts)
{
printf("\nAggregate statistics ==============================="
- "\nTotal packets Tx: %24"PRIu64" [pps]"
- "\nTotal packets Rx: %24"PRIu64" [pps]"
- "\nTotal packets dropped: %19"PRIu64" [pps]",
+ "\nTotal packets Tx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets Rx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets dropped: %17"PRIu64" [pkt/s]",
ts->total_packets_tx / stats_interval,
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
- printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
- "\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues / stats_interval,
- ts->total_failed_enqueues / stats_interval);
+ printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
+ "\nTotal completed ops: %19"PRIu64" [ops/s]"
+ "\nTotal failed ops: %22"PRIu64" [ops/s]",
+ ts->total_submitted / stats_interval,
+ ts->total_completed / stats_interval,
+ ts->total_failed / stats_interval);
}
printf("\n====================================================\n");
@@ -175,13 +179,10 @@ static void
print_stats(char *prgname)
{
struct total_statistics ts, delta_ts;
+ struct rte_dma_stats stats = {0};
uint32_t i, port_id, dev_id;
- struct rte_rawdev_xstats_name *names_xstats;
- uint64_t *xstats;
- unsigned int *ids_xstats, nb_xstats;
char status_string[255]; /* to print at the top of the output */
int status_strlen;
- int ret;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -207,48 +208,6 @@ print_stats(char *prgname)
sizeof(status_string) - status_strlen,
"Ring Size = %d", ring_size);
- /* Allocate memory for xstats names and values */
- ret = rte_rawdev_xstats_names_get(
- cfg.ports[0].ioat_ids[0], NULL, 0);
- if (ret < 0)
- return;
- nb_xstats = (unsigned int)ret;
-
- names_xstats = malloc(sizeof(*names_xstats) * nb_xstats);
- if (names_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat names memory\n");
- }
- rte_rawdev_xstats_names_get(cfg.ports[0].ioat_ids[0],
- names_xstats, nb_xstats);
-
- ids_xstats = malloc(sizeof(*ids_xstats) * 2);
- if (ids_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat ids_xstats memory\n");
- }
-
- xstats = malloc(sizeof(*xstats) * 2);
- if (xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat memory\n");
- }
-
- /* Get failed/successful enqueues stats index */
- ids_xstats[0] = ids_xstats[1] = nb_xstats;
- for (i = 0; i < nb_xstats; i++) {
- if (!strcmp(names_xstats[i].name, "failed_enqueues"))
- ids_xstats[0] = i;
- else if (!strcmp(names_xstats[i].name, "successful_enqueues"))
- ids_xstats[1] = i;
- if (ids_xstats[0] < nb_xstats && ids_xstats[1] < nb_xstats)
- break;
- }
- if (ids_xstats[0] == nb_xstats || ids_xstats[1] == nb_xstats) {
- rte_exit(EXIT_FAILURE,
- "Error getting failed/successful enqueues stats index\n");
- }
-
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
@@ -280,17 +239,13 @@ print_stats(char *prgname)
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- dev_id = cfg.ports[i].ioat_ids[j];
- rte_rawdev_xstats_get(dev_id,
- ids_xstats, xstats, 2);
+ dev_id = cfg.ports[i].dmadev_ids[j];
+ rte_dma_stats_get(dev_id, 0, &stats);
+ print_dmadev_stats(dev_id, stats);
- print_rawdev_stats(dev_id, xstats,
- ids_xstats, 2, names_xstats);
-
- delta_ts.total_failed_enqueues +=
- xstats[ids_xstats[0]];
- delta_ts.total_successful_enqueues +=
- xstats[ids_xstats[1]];
+ delta_ts.total_submitted += stats.submitted;
+ delta_ts.total_completed += stats.completed;
+ delta_ts.total_failed += stats.errors;
}
}
}
@@ -298,9 +253,9 @@ print_stats(char *prgname)
delta_ts.total_packets_tx -= ts.total_packets_tx;
delta_ts.total_packets_rx -= ts.total_packets_rx;
delta_ts.total_packets_dropped -= ts.total_packets_dropped;
- delta_ts.total_failed_enqueues -= ts.total_failed_enqueues;
- delta_ts.total_successful_enqueues -=
- ts.total_successful_enqueues;
+ delta_ts.total_submitted -= ts.total_submitted;
+ delta_ts.total_completed -= ts.total_completed;
+ delta_ts.total_failed -= ts.total_failed;
printf("\n");
print_total_stats(&delta_ts);
@@ -310,14 +265,10 @@ print_stats(char *prgname)
ts.total_packets_tx += delta_ts.total_packets_tx;
ts.total_packets_rx += delta_ts.total_packets_rx;
ts.total_packets_dropped += delta_ts.total_packets_dropped;
- ts.total_failed_enqueues += delta_ts.total_failed_enqueues;
- ts.total_successful_enqueues +=
- delta_ts.total_successful_enqueues;
+ ts.total_submitted += delta_ts.total_submitted;
+ ts.total_completed += delta_ts.total_completed;
+ ts.total_failed += delta_ts.total_failed;
}
-
- free(names_xstats);
- free(xstats);
- free(ids_xstats);
}
static void
@@ -361,20 +312,22 @@ static uint32_t
ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
+ struct dma_bufs *dma = &dma_bufs[dev_id];
int ret;
uint32_t i;
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
- ret = rte_ioat_enqueue_copy(dev_id,
+ ret = rte_dma_copy(dev_id, 0,
rte_pktmbuf_iova(pkts[i]),
rte_pktmbuf_iova(pkts_copy[i]),
- rte_pktmbuf_data_len(pkts[i]),
- (uintptr_t)pkts[i],
- (uintptr_t)pkts_copy[i]);
+ rte_pktmbuf_data_len(pkts[i]), 0);
- if (ret != 1)
+ if (ret < 0)
break;
+
+ dma->bufs[ret & MBUF_RING_MASK] = pkts[i];
+ dma->copies[ret & MBUF_RING_MASK] = pkts_copy[i];
}
ret = i;
@@ -394,7 +347,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ rte_dma_submit(dev_id, 0);
/* don't try to enqueue more if HW queue is full */
if (n != m)
@@ -408,20 +361,27 @@ static inline uint32_t
ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
- int32_t rc;
+ struct dma_bufs *dma = &dma_bufs[dev_id];
+ uint16_t nb_dq, filled;
/* Dequeue the mbufs from IOAT device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
- rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
- (void *)src, (void *)dst);
- if (rc < 0) {
- RTE_LOG(CRIT, IOAT,
- "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
- dev_id, rte_errno);
- rc = 0;
+ nb_dq = rte_dma_completed(dev_id, 0, num, NULL, NULL);
+
+ /* Return early if no work to do */
+ if (unlikely(nb_dq == 0))
+ return nb_dq;
+
+ /* Populate pkts_copy with the copies bufs from dma->copies */
+ for (filled = 0; filled < nb_dq; filled++) {
+ src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
+ dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
}
- return rc;
+ dma->sent += nb_dq;
+
+ return filled;
+
}
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
@@ -458,7 +418,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -473,7 +433,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* get completed copies */
nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
- MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
@@ -540,7 +500,7 @@ rx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main rx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -555,7 +515,7 @@ tx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main tx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main tx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -570,7 +530,7 @@ rxtx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx and tx loop for copy on"
+ RTE_LOG(INFO, DMA, "Entering main rx and tx loop for copy on"
" lcore %u\n", rte_lcore_id());
while (!force_quit)
@@ -585,7 +545,7 @@ static void start_forwarding_cores(void)
{
uint32_t lcore_id = rte_lcore_id();
- RTE_LOG(INFO, IOAT, "Entering %s on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering %s on lcore %u\n",
__func__, rte_lcore_id());
if (cfg.nb_lcores == 1) {
@@ -809,20 +769,28 @@ check_link_status(uint32_t port_mask)
static void
configure_rawdev_queue(uint32_t dev_id)
{
- struct rte_ioat_rawdev_config dev_config = {
- .ring_size = ring_size,
- .no_prefetch_completions = (cfg.nb_lcores > 1),
+ struct rte_dma_info info;
+ struct rte_dma_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dma_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ .nb_desc = ring_size
};
- struct rte_rawdev_info info = { .dev_private = &dev_config };
+ uint16_t vchan = 0;
- if (rte_rawdev_configure(dev_id, &info, sizeof(dev_config)) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_configure()\n");
+ if (rte_dma_configure(dev_id, &dev_config) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_configure()\n");
+
+ if (rte_dma_vchan_setup(dev_id, vchan, &qconf) != 0) {
+ printf("Error with queue configuration\n");
+ rte_panic();
}
- if (rte_rawdev_start(dev_id) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_start()\n");
+ rte_dma_info_get(dev_id, &info);
+ if (info.nb_vchans != 1) {
+ printf("Error, no configured queues reported on device id %u\n", dev_id);
+ rte_panic();
}
+ if (rte_dma_start(dev_id) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_start()\n");
}
/* >8 End of configuration of device. */
@@ -830,23 +798,18 @@ configure_rawdev_queue(uint32_t dev_id)
static void
assign_rawdevs(void)
{
- uint16_t nb_rawdev = 0, rdev_id = 0;
+ uint16_t nb_rawdev = 0;
+ int16_t rdev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- struct rte_rawdev_info rdev_info = { 0 };
-
- do {
- if (rdev_id == rte_rawdev_count())
- goto end;
- rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
- } while (rdev_info.driver_name == NULL ||
- strcmp(rdev_info.driver_name,
- IOAT_PMD_RAWDEV_NAME_STR) != 0);
-
- cfg.ports[i].ioat_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+ if (rdev_id == -1)
+ goto end;
+
+ cfg.ports[i].dmadev_ids[j] = rdev_id;
+ configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
+ rdev_id = rte_dma_next_dev(rdev_id + 1);
++nb_rawdev;
}
}
@@ -855,7 +818,7 @@ assign_rawdevs(void)
rte_exit(EXIT_FAILURE,
"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+ RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
}
/* >8 End of using IOAT rawdev API functions. */
@@ -1018,7 +981,7 @@ rawdev_dump(void)
for (i = 0; i < cfg.nb_ports; i++)
for (j = 0; j < cfg.ports[i].nb_queues; j++)
- rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+ rte_dma_dump(cfg.ports[i].dmadev_ids[j], stdout);
}
static void
@@ -1116,15 +1079,15 @@ main(int argc, char **argv)
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
if (ret != 0)
- RTE_LOG(ERR, IOAT, "rte_eth_dev_stop: err=%s, port=%u\n",
+ RTE_LOG(ERR, DMA, "rte_eth_dev_stop: err=%s, port=%u\n",
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
printf("Stopping rawdev %d\n",
- cfg.ports[i].ioat_ids[j]);
- rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j]);
+ rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
} else /* copy_mode == COPY_MODE_SW_NUM */
rte_ring_free(cfg.ports[i].rx_to_tx_ring);
diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build
index 68bce1ab03..c1dd7c9b29 100644
--- a/examples/ioat/meson.build
+++ b/examples/ioat/meson.build
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
+# Copyright(c) 2019-2021 Intel Corporation
# meson file, for building this example as part of a main DPDK build.
#
@@ -7,12 +7,8 @@
# DPDK instance, use 'make'
allow_experimental_apis = true
-build = dpdk_conf.has('RTE_RAW_IOAT')
-if not build
- subdir_done()
-endif
-deps += ['raw_ioat']
+deps += ['dmadev']
sources = files(
'ioatfwd.c',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 7/8] examples/ioat: update naming to match change to dmadev
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (5 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
` (2 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 189 ++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 95 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 5f3564af30..77052ef892 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -53,13 +53,13 @@ struct rxtx_transmission_config {
/* >8 End of configuration of ports and number of assigned lcores. */
/* per-port statistics struct */
-struct ioat_port_statistics {
+struct dma_port_statistics {
uint64_t rx[RTE_MAX_ETHPORTS];
uint64_t tx[RTE_MAX_ETHPORTS];
uint64_t tx_dropped[RTE_MAX_ETHPORTS];
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
-struct ioat_port_statistics port_statistics;
+struct dma_port_statistics port_statistics;
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
@@ -72,14 +72,14 @@ struct total_statistics {
typedef enum copy_mode_t {
#define COPY_MODE_SW "sw"
COPY_MODE_SW_NUM,
-#define COPY_MODE_IOAT "hw"
- COPY_MODE_IOAT_NUM,
+#define COPY_MODE_DMA "hw"
+ COPY_MODE_DMA_NUM,
COPY_MODE_INVALID_NUM,
COPY_MODE_SIZE_NUM = COPY_MODE_INVALID_NUM
} copy_mode_t;
/* mask of enabled ports */
-static uint32_t ioat_enabled_port_mask;
+static uint32_t dma_enabled_port_mask;
/* number of RX queues per port */
static uint16_t nb_queues = 1;
@@ -88,9 +88,9 @@ static uint16_t nb_queues = 1;
static int mac_updating = 1;
/* hardare copy mode enabled by default. */
-static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
+static copy_mode_t copy_mode = COPY_MODE_DMA_NUM;
-/* size of IOAT rawdev ring for hardware copy mode or
+/* size of descriptor ring for hardware copy mode or
* rte_ring for software copy mode
*/
static unsigned short ring_size = 2048;
@@ -116,14 +116,14 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
-static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t dma_batch_sz = MAX_PKT_BURST;
static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
-static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr dma_ports_eth_addr[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
-struct rte_mempool *ioat_pktmbuf_pool;
+struct rte_mempool *dma_pktmbuf_pool;
/* Print out statistics for one port. */
static void
@@ -141,7 +141,7 @@ print_port_stats(uint16_t port_id)
port_statistics.copy_dropped[port_id]);
}
-/* Print out statistics for one IOAT rawdev device. */
+/* Print out statistics for one dmadev device. */
static void
print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
@@ -162,7 +162,7 @@ print_total_stats(struct total_statistics *ts)
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
"\nTotal completed ops: %19"PRIu64" [ops/s]"
"\nTotal failed ops: %22"PRIu64" [ops/s]",
@@ -196,7 +196,7 @@ print_stats(char *prgname)
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Copy Mode = %s,\n", copy_mode == COPY_MODE_SW_NUM ?
- COPY_MODE_SW : COPY_MODE_IOAT);
+ COPY_MODE_SW : COPY_MODE_DMA);
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Updating MAC = %s, ", mac_updating ?
@@ -235,7 +235,7 @@ print_stats(char *prgname)
delta_ts.total_packets_rx +=
port_statistics.rx[port_id];
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
@@ -286,7 +286,7 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
/* src addr */
- rte_ether_addr_copy(&ioat_ports_eth_addr[dest_portid], ð->src_addr);
+ rte_ether_addr_copy(&dma_ports_eth_addr[dest_portid], ð->src_addr);
}
/* Perform packet copy there is a user-defined function. 8< */
@@ -309,7 +309,7 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
@@ -335,7 +335,7 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t num, uint32_t step, uint16_t dev_id)
{
uint32_t i, k, m, n;
@@ -344,7 +344,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
for (i = 0; i < num; i += m) {
m = RTE_MIN(step, num - i);
- n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ n = dma_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
rte_dma_submit(dev_id, 0);
@@ -358,12 +358,12 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+dma_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
uint16_t nb_dq, filled;
- /* Dequeue the mbufs from IOAT device. Since all memory
+ /* Dequeue the mbufs from DMA device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
@@ -373,7 +373,7 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
if (unlikely(nb_dq == 0))
return nb_dq;
- /* Populate pkts_copy with the copies bufs from dma->copies */
+ /* Populate pkts_copy with the copies bufs from dma->copies for tx */
for (filled = 0; filled < nb_dq; filled++) {
src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
@@ -384,9 +384,9 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
}
-/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
+/* Receive packets on one port and enqueue to dmadev or rte_ring. 8< */
static void
-ioat_rx_port(struct rxtx_port_config *rx_config)
+dma_rx_port(struct rxtx_port_config *rx_config)
{
int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
@@ -403,7 +403,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ ret = rte_mempool_get_bulk(dma_pktmbuf_pool,
(void *)pkts_burst_copy, nb_rx);
if (unlikely(ret < 0))
@@ -414,17 +414,16 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pktmbuf_metadata_copy(pkts_burst[j],
pkts_burst_copy[j]);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
-
+ if (copy_mode == COPY_MODE_DMA_NUM) {
/* enqueue packets for hardware copy */
- nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
+ nb_enq = dma_enqueue(pkts_burst, pkts_burst_copy,
+ nb_rx, dma_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst[nb_enq],
nb_rx - nb_enq);
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -432,7 +431,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
/* get completed copies */
- nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ nb_rx = dma_dequeue(pkts_burst, pkts_burst_copy,
MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
@@ -441,14 +440,14 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pkts_burst_copy[j]);
}
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)pkts_burst, nb_rx);
nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
(void *)pkts_burst_copy, nb_rx, NULL);
/* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -456,11 +455,11 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
}
}
-/* >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
+/* >8 End of receive packets on one port and enqueue to dmadev or rte_ring. */
-/* Transmit packets from IOAT rawdev/rte_ring for one port. 8< */
+/* Transmit packets from dmadev/rte_ring for one port. 8< */
static void
-ioat_tx_port(struct rxtx_port_config *tx_config)
+dma_tx_port(struct rxtx_port_config *tx_config)
{
uint32_t i, j, nb_dq, nb_tx;
struct rte_mbuf *mbufs[MAX_PKT_BURST];
@@ -487,13 +486,13 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
-/* >8 End of transmitting packets from IOAT. */
+/* >8 End of transmitting packets from dmadev. */
-/* Main rx processing loop for IOAT rawdev. */
+/* Main rx processing loop for dmadev. */
static void
rx_main_loop(void)
{
@@ -505,7 +504,7 @@ rx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_rx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
}
/* Main tx processing loop for hardware copy. */
@@ -520,7 +519,7 @@ tx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_tx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
/* Main rx and tx loop if only one worker lcore available */
@@ -535,8 +534,8 @@ rxtx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++) {
- ioat_rx_port(&cfg.ports[i]);
- ioat_tx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
}
@@ -566,7 +565,7 @@ static void start_forwarding_cores(void)
/* Display usage */
static void
-ioat_usage(const char *prgname)
+dma_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
@@ -578,13 +577,13 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -s --ring-size RS: size of dmadev descriptor ring for hardware copy mode or rte_ring for software copy mode\n"
" -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
static int
-ioat_parse_portmask(const char *portmask)
+dma_parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
@@ -598,19 +597,19 @@ ioat_parse_portmask(const char *portmask)
}
static copy_mode_t
-ioat_parse_copy_mode(const char *copy_mode)
+dma_parse_copy_mode(const char *copy_mode)
{
if (strcmp(copy_mode, COPY_MODE_SW) == 0)
return COPY_MODE_SW_NUM;
- else if (strcmp(copy_mode, COPY_MODE_IOAT) == 0)
- return COPY_MODE_IOAT_NUM;
+ else if (strcmp(copy_mode, COPY_MODE_DMA) == 0)
+ return COPY_MODE_DMA_NUM;
return COPY_MODE_INVALID_NUM;
}
/* Parse the argument given in the command line of the application */
static int
-ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
+dma_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
"b:" /* dma batch size */
@@ -641,7 +640,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
int option_index;
char *prgname = argv[0];
- ioat_enabled_port_mask = default_port_mask;
+ dma_enabled_port_mask = default_port_mask;
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, short_options,
@@ -649,10 +648,10 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
switch (opt) {
case 'b':
- ioat_batch_sz = atoi(optarg);
- if (ioat_batch_sz > MAX_PKT_BURST) {
+ dma_batch_sz = atoi(optarg);
+ if (dma_batch_sz > MAX_PKT_BURST) {
printf("Invalid dma batch size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -660,19 +659,19 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
max_frame_size = atoi(optarg);
if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
printf("Invalid max frame size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
/* portmask */
case 'p':
- ioat_enabled_port_mask = ioat_parse_portmask(optarg);
- if (ioat_enabled_port_mask & ~default_port_mask ||
- ioat_enabled_port_mask <= 0) {
+ dma_enabled_port_mask = dma_parse_portmask(optarg);
+ if (dma_enabled_port_mask & ~default_port_mask ||
+ dma_enabled_port_mask <= 0) {
printf("Invalid portmask, %s, suggest 0x%x\n",
optarg, default_port_mask);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -682,16 +681,16 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
if (nb_queues == 0 || nb_queues > MAX_RX_QUEUES_COUNT) {
printf("Invalid RX queues number %s. Max %u\n",
optarg, MAX_RX_QUEUES_COUNT);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
case 'c':
- copy_mode = ioat_parse_copy_mode(optarg);
+ copy_mode = dma_parse_copy_mode(optarg);
if (copy_mode == COPY_MODE_INVALID_NUM) {
printf("Invalid copy type. Use: sw, hw\n");
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -700,7 +699,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ring_size = atoi(optarg);
if (ring_size == 0) {
printf("Invalid ring size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -718,7 +717,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
break;
default:
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
}
@@ -767,7 +766,7 @@ check_link_status(uint32_t port_mask)
/* Configuration of device. 8< */
static void
-configure_rawdev_queue(uint32_t dev_id)
+configure_dmadev_queue(uint32_t dev_id)
{
struct rte_dma_info info;
struct rte_dma_conf dev_config = { .nb_vchans = 1 };
@@ -794,33 +793,33 @@ configure_rawdev_queue(uint32_t dev_id)
}
/* >8 End of configuration of device. */
-/* Using IOAT rawdev API functions. 8< */
+/* Using dmadev API functions. 8< */
static void
-assign_rawdevs(void)
+assign_dmadevs(void)
{
- uint16_t nb_rawdev = 0;
- int16_t rdev_id = rte_dma_next_dev(0);
+ uint16_t nb_dmadev = 0;
+ int16_t dev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- if (rdev_id == -1)
+ if (dev_id == -1)
goto end;
- cfg.ports[i].dmadev_ids[j] = rdev_id;
- configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
- rdev_id = rte_dma_next_dev(rdev_id + 1);
- ++nb_rawdev;
+ cfg.ports[i].dmadev_ids[j] = dev_id;
+ configure_dmadev_queue(cfg.ports[i].dmadev_ids[j]);
+ dev_id = rte_dma_next_dev(dev_id + 1);
+ ++nb_dmadev;
}
}
end:
- if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+ if (nb_dmadev < cfg.nb_ports * cfg.ports[0].nb_queues)
rte_exit(EXIT_FAILURE,
- "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
- nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
+ "Not enough dmadevs (%u) for all queues (%u).\n",
+ nb_dmadev, cfg.nb_ports * cfg.ports[0].nb_queues);
+ RTE_LOG(INFO, DMA, "Number of used dmadevs: %u.\n", nb_dmadev);
}
-/* >8 End of using IOAT rawdev API functions. */
+/* >8 End of using dmadev API functions. */
/* Assign ring structures for packet exchanging. 8< */
static void
@@ -878,7 +877,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
}
/* Skip ports that are not enabled */
- if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
+ if ((dma_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
return;
}
@@ -905,7 +904,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ioat_ports_eth_addr[portid]);
+ rte_eth_macaddr_get(portid, &dma_ports_eth_addr[portid]);
/* Init RX queues */
rxq_conf = dev_info.default_rxconf;
@@ -964,7 +963,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
printf("Port %u, MAC address: " RTE_ETHER_ADDR_PRT_FMT "\n\n",
portid,
- RTE_ETHER_ADDR_BYTES(&ioat_ports_eth_addr[portid]));
+ RTE_ETHER_ADDR_BYTES(&dma_ports_eth_addr[portid]));
cfg.ports[cfg.nb_ports].rxtx_port = portid;
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
@@ -972,11 +971,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
/* Get a device dump for each device being used by the application */
static void
-rawdev_dump(void)
+dmadev_dump(void)
{
uint32_t i, j;
- if (copy_mode != COPY_MODE_IOAT_NUM)
+ if (copy_mode != COPY_MODE_DMA_NUM)
return;
for (i = 0; i < cfg.nb_ports; i++)
@@ -992,7 +991,7 @@ signal_handler(int signum)
signum);
force_quit = true;
} else if (signum == SIGUSR1) {
- rawdev_dump();
+ dmadev_dump();
}
}
@@ -1023,9 +1022,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* Parse application arguments (after the EAL ones) */
- ret = ioat_parse_args(argc, argv, nb_ports);
+ ret = dma_parse_args(argc, argv, nb_ports);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid IOAT arguments\n");
+ rte_exit(EXIT_FAILURE, "Invalid DMA arguments\n");
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
@@ -1036,23 +1035,23 @@ main(int argc, char **argv)
/* Create the mbuf pool */
sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
- ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ dma_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
- if (ioat_pktmbuf_pool == NULL)
+ if (dma_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
/* Initialize each port. 8< */
cfg.nb_ports = 0;
RTE_ETH_FOREACH_DEV(portid)
- port_init(portid, ioat_pktmbuf_pool, nb_queues);
+ port_init(portid, dma_pktmbuf_pool, nb_queues);
/* >8 End of initializing each port. */
/* Initialize port xstats */
memset(&port_statistics, 0, sizeof(port_statistics));
/* Assigning each port resources. 8< */
- while (!check_link_status(ioat_enabled_port_mask) && !force_quit)
+ while (!check_link_status(dma_enabled_port_mask) && !force_quit)
sleep(1);
/* Check if there is enough lcores for all ports. */
@@ -1061,8 +1060,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE,
"There should be at least one worker lcore.\n");
- if (copy_mode == COPY_MODE_IOAT_NUM)
- assign_rawdevs();
+ if (copy_mode == COPY_MODE_DMA_NUM)
+ assign_dmadevs();
assign_rings();
/* >8 End of assigning each port resources. */
@@ -1083,9 +1082,9 @@ main(int argc, char **argv)
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- printf("Stopping rawdev %d\n",
+ printf("Stopping dmadev %d\n",
cfg.ports[i].dmadev_ids[j]);
rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v4 8/8] examples/ioat: rename application to dmafwd
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (6 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-10-14 9:53 ` Kevin Laatz
2021-10-22 19:48 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Thomas Monjalon
2021-10-26 0:56 ` fengchengwen
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-14 9:53 UTC (permalink / raw)
To: dev; +Cc: bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
.../sample_app_ug/{ioat.rst => dma.rst} | 102 +++++++++---------
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 0
examples/{ioat => dma}/meson.build | 2 +-
examples/meson.build | 2 +-
7 files changed, 58 insertions(+), 58 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (75%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (100%)
rename examples/{ioat => dma}/meson.build (94%)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/dma.rst
similarity index 75%
rename from doc/guides/sample_app_ug/ioat.rst
rename to doc/guides/sample_app_ug/dma.rst
index 1edad3f9ac..4b8e607774 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/dma.rst
@@ -1,17 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2019 Intel Corporation.
+ Copyright(c) 2019-2021 Intel Corporation.
.. include:: <isonum.txt>
-Packet copying using Intel\ |reg| QuickData Technology
-======================================================
+Packet copying using DMAdev library
+===================================
Overview
--------
This sample is intended as a demonstration of the basic components of a DPDK
-forwarding application and example of how to use IOAT driver API to make
-packets copies.
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
Also while forwarding, the MAC addresses are affected as follows:
@@ -29,7 +29,7 @@ Compiling the Application
To compile the sample application see :doc:`compiling`.
-The application is located in the ``ioat`` sub-directory.
+The application is located in the ``dma`` sub-directory.
Running the Application
@@ -38,8 +38,8 @@ Running the Application
In order to run the hardware copy application, the copying device
needs to be bound to user-space IO driver.
-Refer to the "IOAT Rawdev Driver" chapter in the "Rawdev Drivers" document
-for information on using the driver.
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
The application requires a number of command line options:
@@ -52,13 +52,13 @@ where,
* p MASK: A hexadecimal bitmask of the ports to configure (default is all)
-* q NQ: Number of Rx queues used per port equivalent to CBDMA channels
+* q NQ: Number of Rx queues used per port equivalent to DMA channels
per port (default is 1)
* c CT: Performed packet copy type: software (sw) or hardware using
DMA (hw) (default is hw)
-* s RS: Size of IOAT rawdev ring for hardware copy mode or rte_ring for
+* s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
software copy mode (default is 2048)
* --[no-]mac-updating: Whether MAC address of packets should be changed
@@ -87,7 +87,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
To run the application in a Linux environment with 2 lcores (the main lcore,
plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -95,7 +95,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
Refer to the *DPDK Getting Started Guide* for general information on
running applications and the Environment Abstraction Layer (EAL) options.
@@ -120,7 +120,7 @@ The first task is to initialize the Environment Abstraction Layer (EAL).
The ``argc`` and ``argv`` arguments are provided to the ``rte_eal_init()``
function. The value returned is the number of parsed arguments:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Init EAL. 8<
:end-before: >8 End of init EAL.
@@ -130,7 +130,7 @@ function. The value returned is the number of parsed arguments:
The ``main()`` also allocates a mempool to hold the mbufs (Message Buffers)
used by the application:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Allocates mempool to hold the mbufs. 8<
:end-before: >8 End of allocates mempool to hold the mbufs.
@@ -141,7 +141,7 @@ detail in the "Mbuf Library" section of the *DPDK Programmer's Guide*.
The ``main()`` function also initializes the ports:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Initialize each port. 8<
:end-before: >8 End of initializing each port.
@@ -151,9 +151,9 @@ Each port is configured using ``port_init()`` function. The Ethernet
ports are configured with local settings using the ``rte_eth_dev_configure()``
function and the ``port_conf`` struct. The RSS is enabled so that
multiple Rx queues could be used for packet receiving and copying by
-multiple CBDMA channels per port:
+multiple DMA channels per port:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring port to use RSS for multiple RX queues. 8<
:end-before: >8 End of configuring port to use RSS for multiple RX queues.
@@ -165,7 +165,7 @@ and ``rte_eth_tx_queue_setup()`` functions.
The Ethernet port is then started:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start device. 8<
:end-before: >8 End of starting device.
@@ -174,7 +174,7 @@ The Ethernet port is then started:
Finally the Rx port is set in promiscuous mode:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: RX port is set in promiscuous mode. 8<
:end-before: >8 End of RX port is set in promiscuous mode.
@@ -183,7 +183,7 @@ Finally the Rx port is set in promiscuous mode:
After that each port application assigns resources needed.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assigning each port resources. 8<
:end-before: >8 End of assigning each port resources.
@@ -192,30 +192,30 @@ After that each port application assigns resources needed.
Ring structures are assigned for exchanging packets between lcores for both SW
and HW copy modes.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assign ring structures for packet exchanging. 8<
:end-before: >8 End of assigning ring structures for packet exchanging.
:dedent: 0
-When using hardware copy each Rx queue of the port is assigned an
-IOAT device (``assign_rawdevs()``) using IOAT Rawdev Driver API
-functions:
+When using hardware copy each Rx queue of the port is assigned a DMA device
+(``assign_dmadevs()``) using DMAdev library API functions:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Using IOAT rawdev API functions. 8<
- :end-before: >8 End of using IOAT rawdev API functions.
+ :start-after: Using dmadev API functions. 8<
+ :end-before: >8 End of using dmadev API functions.
:dedent: 0
-The initialization of hardware device is done by ``rte_rawdev_configure()``
-function using ``rte_rawdev_info`` struct. After configuration the device is
-started using ``rte_rawdev_start()`` function. Each of the above operations
-is done in ``configure_rawdev_queue()``.
+The initialization of hardware device is done by ``rte_dma_configure()`` and
+``rte_dma_vchan_setup()`` functions using the ``rte_dma_conf`` and
+``rte_dma_vchan_conf`` structs. After configuration the device is started
+using ``rte_dma_start()`` function. Each of the above operations is done in
+``configure_dmadev_queue()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuration of device. 8<
:end-before: >8 End of configuration of device.
@@ -237,7 +237,7 @@ The Lcores Launching Functions
As described above, ``main()`` function invokes ``start_forwarding_cores()``
function in order to start processing for each lcore:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start processing for each lcore. 8<
:end-before: >8 End of starting to processfor each lcore.
@@ -248,7 +248,7 @@ using ``rte_eal_remote_launch()``. The configured ports, their number
and number of assigned lcores are stored in user-defined
``rxtx_transmission_config`` struct:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring ports and number of assigned lcores in struct. 8<
:end-before: >8 End of configuration of ports and number of assigned lcores.
@@ -260,32 +260,32 @@ corresponding to ports and lcores configuration provided by the user.
The Lcores Processing Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For receiving packets on each port, the ``ioat_rx_port()`` function is used.
+For receiving packets on each port, the ``dma_rx_port()`` function is used.
The function receives packets on each configured Rx queue. Depending on the
-mode the user chose, it will enqueue packets to IOAT rawdev channels and
+mode the user chose, it will enqueue packets to DMA channels and
then invoke copy process (hardware copy), or perform software copy of each
packet using ``pktmbuf_sw_copy()`` function and enqueue them to an rte_ring:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
The packets are received in burst mode using ``rte_eth_rx_burst()``
function. When using hardware copy mode the packets are enqueued in
-copying device's buffer using ``ioat_enqueue_packets()`` which calls
-``rte_ioat_enqueue_copy()``. When all received packets are in the
-buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
-Function ``rte_ioat_enqueue_copy()`` operates on physical address of
+copying device's buffer using ``dma_enqueue_packets()`` which calls
+``rte_dma_copy()``. When all received packets are in the
+buffer the copy operations are started by calling ``rte_dma_submit()``.
+Function ``rte_dma_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
used to get the address of the start of the data within the mbuf.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
@@ -293,15 +293,15 @@ Once the copies have been completed (this includes gathering the completions in
HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
is used to pass the packets to the TX function.
-All completed copies are processed by ``ioat_tx_port()`` function. This function
+All completed copies are processed by ``dma_tx_port()`` function. This function
dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Transmit packets from IOAT rawdev/rte_ring for one port. 8<
- :end-before: >8 End of transmitting packets from IOAT.
+ :start-after: Transmit packets from dmadev/rte_ring for one port. 8<
+ :end-before: >8 End of transmitting packets from dmadev.
:dedent: 0
The Packet Copying Functions
@@ -311,7 +311,7 @@ In order to perform SW packet copy, there are user-defined functions to first co
the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
(``pktmbuf_sw_copy()``):
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Perform packet copy there is a user-defined function. 8<
:end-before: >8 End of perform packet copy there is a user-defined function.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index e8db83d3a7..8835dd03ac 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -22,7 +22,7 @@ Sample Applications User Guides
ip_reassembly
kernel_nic_interface
keep_alive
- ioat
+ dma
l2_forward_crypto
l2_forward_job_stats
l2_forward_real_virtual
diff --git a/doc/guides/sample_app_ug/intro.rst b/doc/guides/sample_app_ug/intro.rst
index 8ff223b16c..e765f1fd6b 100644
--- a/doc/guides/sample_app_ug/intro.rst
+++ b/doc/guides/sample_app_ug/intro.rst
@@ -58,8 +58,8 @@ examples are highlighted below.
forwarding Graph, or ``l3fwd_graph`` application does forwarding based on IPv4
like a simple router with DPDK Graph framework.
-* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
- or ``ioatfwd`` application demonstrates how to use IOAT rawdev driver for
+* :doc:`Hardware packet copying<dma>`: The Hardware packet copying,
+ or ``dmafwd`` application demonstrates how to use DMAdev library for
copying packets between two threads.
* :doc:`Packet Distributor<dist_app>`: The Packet Distributor
diff --git a/examples/ioat/Makefile b/examples/dma/Makefile
similarity index 97%
rename from examples/ioat/Makefile
rename to examples/dma/Makefile
index 178fc8778c..59af6478b7 100644
--- a/examples/ioat/Makefile
+++ b/examples/dma/Makefile
@@ -2,10 +2,10 @@
# Copyright(c) 2019 Intel Corporation
# binary name
-APP = ioatfwd
+APP = dmafwd
# all source are stored in SRCS-y
-SRCS-y := ioatfwd.c
+SRCS-y := dmafwd.c
PKGCONF ?= pkg-config
diff --git a/examples/ioat/ioatfwd.c b/examples/dma/dmafwd.c
similarity index 100%
rename from examples/ioat/ioatfwd.c
rename to examples/dma/dmafwd.c
diff --git a/examples/ioat/meson.build b/examples/dma/meson.build
similarity index 94%
rename from examples/ioat/meson.build
rename to examples/dma/meson.build
index c1dd7c9b29..9fdcad660e 100644
--- a/examples/ioat/meson.build
+++ b/examples/dma/meson.build
@@ -11,5 +11,5 @@ allow_experimental_apis = true
deps += ['dmadev']
sources = files(
- 'ioatfwd.c',
+ 'dmafwd.c',
)
diff --git a/examples/meson.build b/examples/meson.build
index 07e682401b..d50f09db12 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -12,13 +12,13 @@ all_examples = [
'bond',
'cmdline',
'distributor',
+ 'dma',
'ethtool',
'eventdev_pipeline',
'fips_validation',
'flow_classify',
'flow_filtering',
'helloworld',
- 'ioat',
'ip_fragmentation',
'ip_pipeline',
'ip_reassembly',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (7 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
@ 2021-10-22 19:48 ` Thomas Monjalon
2021-10-25 19:59 ` Kevin Laatz
2021-10-26 0:56 ` fengchengwen
9 siblings, 1 reply; 63+ messages in thread
From: Thomas Monjalon @ 2021-10-22 19:48 UTC (permalink / raw)
To: Kevin Laatz
Cc: dev, bruce.richardson, fengchengwen, conor.walsh, ferruh.yigit
14/10/2021 11:53, Kevin Laatz:
> This patchset first adds some additional command line options to the
> existing ioatfwd application to enhance usability.
Please could you rebase?
I see some errors about max_rx_pkt_len and DEV_RX_OFFLOAD_JUMBO_FRAME.
Cc Ferruh for help if needed.
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev
2021-10-22 19:48 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Thomas Monjalon
@ 2021-10-25 19:59 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-25 19:59 UTC (permalink / raw)
To: Thomas Monjalon
Cc: dev, bruce.richardson, fengchengwen, conor.walsh, ferruh.yigit
On 22/10/2021 20:48, Thomas Monjalon wrote:
> 14/10/2021 11:53, Kevin Laatz:
>> This patchset first adds some additional command line options to the
>> existing ioatfwd application to enhance usability.
> Please could you rebase?
> I see some errors about max_rx_pkt_len and DEV_RX_OFFLOAD_JUMBO_FRAME.
> Cc Ferruh for help if needed.
>
I'll send a v5 with rebase and fix for this.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
` (8 preceding siblings ...)
2021-10-22 19:48 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Thomas Monjalon
@ 2021-10-26 0:56 ` fengchengwen
2021-10-26 11:46 ` Kevin Laatz
9 siblings, 1 reply; 63+ messages in thread
From: fengchengwen @ 2021-10-26 0:56 UTC (permalink / raw)
To: Kevin Laatz, dev; +Cc: bruce.richardson, conor.walsh
Hi Kevin,
We test whole patch set and found it should add one judgement:
the ring_size should be less than or equal to MBUF_RING_SIZE.
If ring_size greater than MBUF_RING_SIZE, the tracking DMA bufs
may be overwrited when the DMA copy is not in time.
Thanks.
On 2021/10/14 17:53, Kevin Laatz wrote:
> This patchset first adds some additional command line options to the
> existing ioatfwd application to enhance usability.
>
> The last 3 patches of this set then port the ioatfwd application to use the
> dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
> all variables etc are renamed to be more appropriate for using with the
> DMAdev library. Lastly, the application itself is renamed to "dmafwd".
>
> Depends-on: series-19594 ("support dmadev")
>
> ---
> v4:
> - rebase on dmadev lib v26 patchset
> v3:
> - add signal-triggered device dump
> - add cmd line option to control stats print frequency
> - documentation updates
> - small miscellaneous changes from review feedback
>
> Kevin Laatz (5):
> examples/ioat: add cmd line option to control stats print interval
> examples/ioat: add signal-triggered device dumps
> examples/ioat: port application to dmadev APIs
> examples/ioat: update naming to match change to dmadev
> examples/ioat: rename application to dmafwd
>
> Konstantin Ananyev (3):
> examples/ioat: always use same lcore for both DMA requests enqueue and
> dequeue
> examples/ioat: add cmd line option to control DMA batch size
> examples/ioat: add cmd line option to control max frame size
>
> .../sample_app_ug/{ioat.rst => dma.rst} | 149 ++---
> doc/guides/sample_app_ug/index.rst | 2 +-
> doc/guides/sample_app_ug/intro.rst | 4 +-
> examples/{ioat => dma}/Makefile | 4 +-
> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 632 ++++++++++--------
> examples/{ioat => dma}/meson.build | 10 +-
> examples/meson.build | 2 +-
> 7 files changed, 427 insertions(+), 376 deletions(-)
> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
> rename examples/{ioat => dma}/Makefile (97%)
> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
> rename examples/{ioat => dma}/meson.build (63%)
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev
2021-10-26 0:56 ` fengchengwen
@ 2021-10-26 11:46 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 11:46 UTC (permalink / raw)
To: fengchengwen, dev; +Cc: bruce.richardson, conor.walsh
On 26/10/2021 01:56, fengchengwen wrote:
> Hi Kevin,
>
> We test whole patch set and found it should add one judgement:
> the ring_size should be less than or equal to MBUF_RING_SIZE.
> If ring_size greater than MBUF_RING_SIZE, the tracking DMA bufs
> may be overwrited when the DMA copy is not in time.
>
> Thanks.
>
Thanks for testing, Chengwen. I'll include this check in the v5.
/Kevin
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
` (8 preceding siblings ...)
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
` (9 more replies)
9 siblings, 10 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
This patchset first adds some additional command line options to the
existing ioatfwd application to enhance usability.
The last 3 patches of this set then port the ioatfwd application to use the
dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
all variables etc are renamed to be more appropriate for using with the
DMAdev library. Lastly, the application itself is renamed to "dmafwd".
---
v5:
- rebase on latest main
- add check to ensure ring_size <= MBUF_RING_SIZE (Chengwen)
v4:
- rebase on dmadev lib v26 patchset
v3:
- add signal-triggered device dump
- add cmd line option to control stats print frequency
- documentation updates
- small miscellaneous changes from review feedback
Kevin Laatz (5):
examples/ioat: add cmd line option to control stats print interval
examples/ioat: add signal-triggered device dumps
examples/ioat: port application to dmadev APIs
examples/ioat: update naming to match change to dmadev
examples/ioat: rename application to dmafwd
Konstantin Ananyev (3):
examples/ioat: always use same lcore for both DMA requests enqueue and
dequeue
examples/ioat: add cmd line option to control DMA batch size
examples/ioat: add cmd line option to control max frame size
.../sample_app_ug/{ioat.rst => dma.rst} | 149 ++--
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 638 ++++++++++--------
examples/{ioat => dma}/meson.build | 10 +-
examples/meson.build | 2 +-
7 files changed, 433 insertions(+), 376 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
rename examples/{ioat => dma}/meson.build (63%)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
` (8 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev
Cc: thomas, bruce.richardson, fengchengwen, conor.walsh,
Konstantin Ananyev, Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Documentation updates to reflect these changes are also included.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 39 +++----
examples/ioat/ioatfwd.c | 185 ++++++++++++++++--------------
2 files changed, 117 insertions(+), 107 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index ee0a627b06..2e9d3d6258 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -183,10 +183,8 @@ After that each port application assigns resources needed.
:end-before: >8 End of assigning each port resources.
:dedent: 1
-Depending on mode set (whether copy should be done by software or by hardware)
-special structures are assigned to each port. If software copy was chosen,
-application have to assign ring structures for packet exchanging between lcores
-assigned to ports.
+Ring structures are assigned for exchanging packets between lcores for both SW
+and HW copy modes.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -275,12 +273,8 @@ copying device's buffer using ``ioat_enqueue_packets()`` which calls
buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
Function ``rte_ioat_enqueue_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
-start of the data buffer (``buf_iova``). Thus the address is adjusted
-by ``addr_offset`` value in order to get the address of ``rearm_data``
-member of ``rte_mbuf``. That way both the packet data and metadata can
-be copied in a single operation. This method can be used because the mbufs
-are direct mbufs allocated by the apps. If another app uses external buffers,
-or indirect mbufs, then multiple copy operations must be used.
+start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
+used to get the address of the start of the data within the mbuf.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -289,12 +283,13 @@ or indirect mbufs, then multiple copy operations must be used.
:dedent: 0
-All completed copies are processed by ``ioat_tx_port()`` function. When using
-hardware copy mode the function invokes ``rte_ioat_completed_ops()``
-on each assigned IOAT channel to gather copied packets. If software copy
-mode is used the function dequeues copied packets from the rte_ring. Then each
-packet MAC address is changed if it was enabled. After that copies are sent
-in burst mode using `` rte_eth_tx_burst()``.
+Once the copies have been completed (this includes gathering the completions in
+HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
+is used to pass the packets to the TX function.
+
+All completed copies are processed by ``ioat_tx_port()`` function. This function
+dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
+if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
@@ -306,11 +301,9 @@ in burst mode using `` rte_eth_tx_burst()``.
The Packet Copying Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-In order to perform packet copy there is a user-defined function
-``pktmbuf_sw_copy()`` used. It copies a whole packet by copying
-metadata from source packet to new mbuf, and then copying a data
-chunk of source packet. Both memory copies are done using
-``rte_memcpy()``:
+In order to perform SW packet copy, there are user-defined functions to first copy
+the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
+(``pktmbuf_sw_copy()``):
.. literalinclude:: ../../../examples/ioat/ioatfwd.c
:language: c
@@ -318,8 +311,8 @@ chunk of source packet. Both memory copies are done using
:end-before: >8 End of perform packet copy there is a user-defined function.
:dedent: 0
-The metadata in this example is copied from ``rearm_data`` member of
-``rte_mbuf`` struct up to ``cacheline1``.
+The metadata in this example is copied from ``rx_descriptor_fields1`` marker of
+``rte_mbuf`` struct up to ``buf_len`` member.
In order to understand why software packet copying is done as shown
above please refer to the "Mbuf Library" section of the
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index b1aa2767a0..fd690ce326 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -331,43 +331,36 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
/* Perform packet copy there is a user-defined function. 8< */
static inline void
-pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+pktmbuf_metadata_copy(const struct rte_mbuf *src, struct rte_mbuf *dst)
{
- /* Copy packet metadata */
- rte_memcpy(&dst->rearm_data,
- &src->rearm_data,
- offsetof(struct rte_mbuf, cacheline1)
- - offsetof(struct rte_mbuf, rearm_data));
+ dst->data_off = src->data_off;
+ memcpy(&dst->rx_descriptor_fields1, &src->rx_descriptor_fields1,
+ offsetof(struct rte_mbuf, buf_len) -
+ offsetof(struct rte_mbuf, rx_descriptor_fields1));
+}
- /* Copy packet data */
+/* Copy packet data */
+static inline void
+pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
+{
rte_memcpy(rte_pktmbuf_mtod(dst, char *),
rte_pktmbuf_mtod(src, char *), src->data_len);
}
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf **pkts,
+ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
int ret;
uint32_t i;
- struct rte_mbuf *pkts_copy[MAX_PKT_BURST];
-
- const uint64_t addr_offset = RTE_PTR_DIFF(pkts[0]->buf_addr,
- &pkts[0]->rearm_data);
-
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_copy, nb_rx);
-
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE, "Unable to allocate memory.\n");
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
ret = rte_ioat_enqueue_copy(dev_id,
- pkts[i]->buf_iova - addr_offset,
- pkts_copy[i]->buf_iova - addr_offset,
- rte_pktmbuf_data_len(pkts[i]) + addr_offset,
+ rte_pktmbuf_iova(pkts[i]),
+ rte_pktmbuf_iova(pkts_copy[i]),
+ rte_pktmbuf_data_len(pkts[i]),
(uintptr_t)pkts[i],
(uintptr_t)pkts_copy[i]);
@@ -376,20 +369,50 @@ ioat_enqueue_packets(struct rte_mbuf **pkts,
}
ret = i;
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts[i], nb_rx - i);
- rte_mempool_put_bulk(ioat_pktmbuf_pool, (void *)&pkts_copy[i],
- nb_rx - i);
-
return ret;
}
+static inline uint32_t
+ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+ uint32_t num, uint16_t dev_id)
+{
+ uint32_t n;
+
+ n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
+
+ return n;
+}
+
+static inline uint32_t
+ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+ uint16_t dev_id)
+{
+ int32_t rc;
+ /* Dequeue the mbufs from IOAT device. Since all memory
+ * is DPDK pinned memory and therefore all addresses should
+ * be valid, we don't check for copy errors
+ */
+ rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
+ (void *)src, (void *)dst);
+ if (rc < 0) {
+ RTE_LOG(CRIT, IOAT,
+ "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
+ dev_id, rte_errno);
+ rc = 0;
+ }
+ return rc;
+}
+
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
static void
ioat_rx_port(struct rxtx_port_config *rx_config)
{
+ int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
for (i = 0; i < rx_config->nb_queues; i++) {
@@ -401,40 +424,54 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
+ ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst_copy, nb_rx);
+
+ if (unlikely(ret < 0))
+ rte_exit(EXIT_FAILURE,
+ "Unable to allocate memory.\n");
+
+ for (j = 0; j < nb_rx; j++)
+ pktmbuf_metadata_copy(pkts_burst[j],
+ pkts_burst_copy[j]);
+
if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Perform packet hardware copy */
- nb_enq = ioat_enqueue_packets(pkts_burst,
+
+ /* enqueue packets for hardware copy */
+ nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
nb_rx, rx_config->ioat_ids[i]);
- if (nb_enq > 0)
- rte_ioat_perform_ops(rx_config->ioat_ids[i]);
- } else {
- /* Perform packet software copy, free source packets */
- int ret;
- struct rte_mbuf *pkts_burst_copy[MAX_PKT_BURST];
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst_copy, nb_rx);
+ /* free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst[nb_enq],
+ nb_rx - nb_enq);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
- if (unlikely(ret < 0))
- rte_exit(EXIT_FAILURE,
- "Unable to allocate memory.\n");
+ port_statistics.copy_dropped[rx_config->rxtx_port] +=
+ (nb_rx - nb_enq);
+ /* get completed copies */
+ nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ } else {
+ /* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
pktmbuf_sw_copy(pkts_burst[j],
pkts_burst_copy[j]);
+ }
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)pkts_burst, nb_rx);
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)pkts_burst, nb_rx);
- nb_enq = rte_ring_enqueue_burst(
- rx_config->rx_to_tx_ring,
- (void *)pkts_burst_copy, nb_rx, NULL);
+ nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
+ (void *)pkts_burst_copy, nb_rx, NULL);
- /* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&pkts_burst_copy[nb_enq],
- nb_rx - nb_enq);
- }
+ /* Free any not enqueued packets. */
+ rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ (void *)&pkts_burst_copy[nb_enq],
+ nb_rx - nb_enq);
port_statistics.copy_dropped[rx_config->rxtx_port] +=
(nb_rx - nb_enq);
@@ -446,51 +483,33 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
static void
ioat_tx_port(struct rxtx_port_config *tx_config)
{
- uint32_t i, j, nb_dq = 0;
- struct rte_mbuf *mbufs_src[MAX_PKT_BURST];
- struct rte_mbuf *mbufs_dst[MAX_PKT_BURST];
+ uint32_t i, j, nb_dq, nb_tx;
+ struct rte_mbuf *mbufs[MAX_PKT_BURST];
for (i = 0; i < tx_config->nb_queues; i++) {
- if (copy_mode == COPY_MODE_IOAT_NUM) {
- /* Dequeue the mbufs from IOAT device. Since all memory
- * is DPDK pinned memory and therefore all addresses should
- * be valid, we don't check for copy errors
- */
- nb_dq = rte_ioat_completed_ops(
- tx_config->ioat_ids[i], MAX_PKT_BURST, NULL, NULL,
- (void *)mbufs_src, (void *)mbufs_dst);
- } else {
- /* Dequeue the mbufs from rx_to_tx_ring. */
- nb_dq = rte_ring_dequeue_burst(
- tx_config->rx_to_tx_ring, (void *)mbufs_dst,
- MAX_PKT_BURST, NULL);
- }
-
- if ((int32_t) nb_dq <= 0)
- return;
- if (copy_mode == COPY_MODE_IOAT_NUM)
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)mbufs_src, nb_dq);
+ /* Dequeue the mbufs from rx_to_tx_ring. */
+ nb_dq = rte_ring_dequeue_burst(tx_config->rx_to_tx_ring,
+ (void *)mbufs, MAX_PKT_BURST, NULL);
+ if (nb_dq == 0)
+ continue;
/* Update macs if enabled */
if (mac_updating) {
for (j = 0; j < nb_dq; j++)
- update_mac_addrs(mbufs_dst[j],
+ update_mac_addrs(mbufs[j],
tx_config->rxtx_port);
}
- const uint16_t nb_tx = rte_eth_tx_burst(
- tx_config->rxtx_port, 0,
- (void *)mbufs_dst, nb_dq);
+ nb_tx = rte_eth_tx_burst(tx_config->rxtx_port, 0,
+ (void *)mbufs, nb_dq);
port_statistics.tx[tx_config->rxtx_port] += nb_tx;
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
rte_mempool_put_bulk(ioat_pktmbuf_pool,
- (void *)&mbufs_dst[nb_tx],
- nb_dq - nb_tx);
+ (void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
/* >8 End of transmitting packets from IOAT. */
@@ -852,9 +871,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
- if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
ret = rte_eth_dev_configure(portid, nb_queues, 1, &local_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device:"
@@ -973,7 +989,8 @@ main(int argc, char **argv)
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
- 4 * MAX_PKT_BURST) + rte_lcore_count() * MEMPOOL_CACHE_SIZE),
+ 4 * MAX_PKT_BURST + ring_size) + ring_size +
+ rte_lcore_count() * MEMPOOL_CACHE_SIZE),
MIN_POOL_SIZE);
/* Create the mbuf pool */
@@ -1005,8 +1022,8 @@ main(int argc, char **argv)
if (copy_mode == COPY_MODE_IOAT_NUM)
assign_rawdevs();
- else /* copy_mode == COPY_MODE_SW_NUM */
- assign_rings();
+
+ assign_rings();
/* >8 End of assigning each port resources. */
start_forwarding_cores();
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 2/8] examples/ioat: add cmd line option to control DMA batch size
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
` (7 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev
Cc: thomas, bruce.richardson, fengchengwen, conor.walsh,
Konstantin Ananyev, Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 40 ++++++++++++++++++++++++-------
2 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 2e9d3d6258..404ca2e19a 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating]
+ [--[no-]mac-updating] [-b BS]
where,
@@ -64,6 +64,8 @@ where,
* --[no-]mac-updating: Whether MAC address of packets should be changed
or not (default is mac-updating)
+* b BS: set the DMA batch size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index fd690ce326..887cdf30ec 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -24,6 +24,7 @@
#define CMD_LINE_OPT_NB_QUEUE "nb-queue"
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
+#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -102,6 +103,8 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
+static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -374,15 +377,25 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
static inline uint32_t
ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
- uint32_t num, uint16_t dev_id)
+ uint32_t num, uint32_t step, uint16_t dev_id)
{
- uint32_t n;
+ uint32_t i, k, m, n;
+
+ k = 0;
+ for (i = 0; i < num; i += m) {
+
+ m = RTE_MIN(step, num - i);
+ n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ k += n;
+ if (n > 0)
+ rte_ioat_perform_ops(dev_id);
- n = ioat_enqueue_packets(pkts, pkts_copy, num, dev_id);
- if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ /* don't try to enqueue more if HW queue is full */
+ if (n != m)
+ break;
+ }
- return n;
+ return k;
}
static inline uint32_t
@@ -439,7 +452,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -590,6 +603,7 @@ static void
ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -b --dma-batch-size: number of requests per DMA batch\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -631,9 +645,10 @@ static int
ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
+ "b:" /* dma batch size */
+ "c:" /* copy type (sw|hw) */
"p:" /* portmask */
"q:" /* number of RX queues per port */
- "c:" /* copy type (sw|hw) */
"s:" /* ring size */
;
@@ -644,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_NB_QUEUE, required_argument, NULL, 'q'},
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
+ {CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{NULL, 0, 0, 0}
};
@@ -660,6 +676,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
lgopts, &option_index)) != EOF) {
switch (opt) {
+ case 'b':
+ ioat_batch_sz = atoi(optarg);
+ if (ioat_batch_sz > MAX_PKT_BURST) {
+ printf("Invalid dma batch size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 3/8] examples/ioat: add cmd line option to control max frame size
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
` (6 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev
Cc: thomas, bruce.richardson, fengchengwen, conor.walsh,
Konstantin Ananyev, Kevin Laatz
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 23 +++++++++++++++++++++--
2 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 404ca2e19a..127129dd4b 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS]
+ [--[no-]mac-updating] [-b BS] [-f FS]
where,
@@ -66,6 +66,8 @@ where,
* b BS: set the DMA batch size
+* f FS: set the max frame size
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 887cdf30ec..2d02444fc7 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -25,6 +25,7 @@
#define CMD_LINE_OPT_COPY_TYPE "copy-type"
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
+#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -104,6 +105,7 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
@@ -604,6 +606,7 @@ ioat_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
+ " -f --max-frame-size: max frame size\n"
" -p --portmask: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per port (default is 1)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
@@ -647,6 +650,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
static const char short_options[] =
"b:" /* dma batch size */
"c:" /* copy type (sw|hw) */
+ "f:" /* max frame size */
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
@@ -660,6 +664,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_COPY_TYPE, required_argument, NULL, 'c'},
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
+ {CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
{NULL, 0, 0, 0}
};
@@ -684,6 +689,15 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
return -1;
}
break;
+ case 'f':
+ max_frame_size = atoi(optarg);
+ if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
+ printf("Invalid max frame size, %s.\n", optarg);
+ ioat_usage(prgname);
+ return -1;
+ }
+ break;
+
/* portmask */
case 'p':
ioat_enabled_port_mask = ioat_parse_portmask(optarg);
@@ -879,6 +893,9 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
struct rte_eth_dev_info dev_info;
int ret, i;
+ if (max_frame_size > local_port_conf.rxmode.mtu)
+ local_port_conf.rxmode.mtu = max_frame_size;
+
/* Skip ports that are not enabled */
if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
@@ -989,6 +1006,7 @@ main(int argc, char **argv)
uint16_t nb_ports, portid;
uint32_t i;
unsigned int nb_mbufs;
+ size_t sz;
/* Init EAL. 8< */
ret = rte_eal_init(argc, argv);
@@ -1018,9 +1036,10 @@ main(int argc, char **argv)
MIN_POOL_SIZE);
/* Create the mbuf pool */
+ sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
+ sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
- MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
- rte_socket_id());
+ MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
if (ioat_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 4/8] examples/ioat: add cmd line option to control stats print interval
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (2 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
` (5 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
doc/guides/sample_app_ug/ioat.rst | 4 +++-
examples/ioat/ioatfwd.c | 31 +++++++++++++++++++++++--------
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 127129dd4b..1edad3f9ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@ The application requires a number of command line options:
.. code-block:: console
./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
- [--[no-]mac-updating] [-b BS] [-f FS]
+ [--[no-]mac-updating] [-b BS] [-f FS] [-i SI]
where,
@@ -68,6 +68,8 @@ where,
* f FS: set the max frame size
+* i SI: set the interval, in second, between statistics prints (default is 1)
+
The application can be launched in various configurations depending on
provided parameters. The app can use up to 2 lcores: one of them receives
incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 2d02444fc7..995ba7b8db 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -26,6 +26,7 @@
#define CMD_LINE_OPT_RING_SIZE "ring-size"
#define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
#define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
+#define CMD_LINE_OPT_STATS_INTERVAL "stats-interval"
/* configurable number of RX/TX ring descriptors */
#define RX_DEFAULT_RINGSIZE 1024
@@ -95,6 +96,9 @@ static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
*/
static unsigned short ring_size = 2048;
+/* interval, in seconds, between stats prints */
+static unsigned short stats_interval = 1;
+
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -152,15 +156,15 @@ print_total_stats(struct total_statistics *ts)
"\nTotal packets Tx: %24"PRIu64" [pps]"
"\nTotal packets Rx: %24"PRIu64" [pps]"
"\nTotal packets dropped: %19"PRIu64" [pps]",
- ts->total_packets_tx,
- ts->total_packets_rx,
- ts->total_packets_dropped);
+ ts->total_packets_tx / stats_interval,
+ ts->total_packets_rx / stats_interval,
+ ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
"\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues,
- ts->total_failed_enqueues);
+ ts->total_successful_enqueues / stats_interval,
+ ts->total_failed_enqueues / stats_interval);
}
printf("\n====================================================\n");
@@ -248,10 +252,10 @@ print_stats(char *prgname)
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
- /* Sleep for 1 second each round - init sleep allows reading
+ /* Sleep for "stats_interval" seconds each round - init sleep allows reading
* messages from app startup.
*/
- sleep(1);
+ sleep(stats_interval);
/* Clear screen and move to top left */
printf("%s%s", clr, topLeft);
@@ -614,7 +618,8 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+ " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
@@ -654,6 +659,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
"p:" /* portmask */
"q:" /* number of RX queues per port */
"s:" /* ring size */
+ "i:" /* interval, in seconds, between stats prints */
;
static const struct option lgopts[] = {
@@ -665,6 +671,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
{CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
+ {CMD_LINE_OPT_STATS_INTERVAL, required_argument, NULL, 'i'},
{NULL, 0, 0, 0}
};
@@ -738,6 +745,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
}
break;
+ case 'i':
+ stats_interval = atoi(optarg);
+ if (stats_interval == 0) {
+ printf("Invalid stats interval, setting to 1\n");
+ stats_interval = 1; /* set to default */
+ }
+ break;
+
/* long options */
case 0:
break;
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 5/8] examples/ioat: add signal-triggered device dumps
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (3 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
` (4 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Enable dumping device info via the signal handler. With this change, when a
SIGUSR1 is issued, the application will print a dump of all devices being
used by the application.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 995ba7b8db..e8a3f2f88a 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1004,6 +1004,20 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
}
+/* Get a device dump for each device being used by the application */
+static void
+rawdev_dump(void)
+{
+ uint32_t i, j;
+
+ if (copy_mode != COPY_MODE_IOAT_NUM)
+ return;
+
+ for (i = 0; i < cfg.nb_ports; i++)
+ for (j = 0; j < cfg.ports[i].nb_queues; j++)
+ rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+}
+
static void
signal_handler(int signum)
{
@@ -1011,6 +1025,8 @@ signal_handler(int signum)
printf("\n\nSignal %d received, preparing to exit...\n",
signum);
force_quit = true;
+ } else if (signum == SIGUSR1) {
+ rawdev_dump();
}
}
@@ -1034,6 +1050,7 @@ main(int argc, char **argv)
force_quit = false;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
+ signal(SIGUSR1, signal_handler);
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 6/8] examples/ioat: port application to dmadev APIs
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (4 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
` (3 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 255 +++++++++++++++++---------------------
examples/ioat/meson.build | 8 +-
2 files changed, 115 insertions(+), 148 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index e8a3f2f88a..a242588297 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019-2021 Intel Corporation
*/
#include <stdint.h>
@@ -10,11 +10,10 @@
#include <rte_malloc.h>
#include <rte_ethdev.h>
-#include <rte_rawdev.h>
-#include <rte_ioat_rawdev.h>
+#include <rte_dmadev.h>
/* size of ring used for software copying between rx and tx. */
-#define RTE_LOGTYPE_IOAT RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_DMA RTE_LOGTYPE_USER1
#define MAX_PKT_BURST 32
#define MEMPOOL_CACHE_SIZE 512
#define MIN_POOL_SIZE 65536U
@@ -41,8 +40,8 @@ struct rxtx_port_config {
uint16_t nb_queues;
/* for software copy mode */
struct rte_ring *rx_to_tx_ring;
- /* for IOAT rawdev copy mode */
- uint16_t ioat_ids[MAX_RX_QUEUES_COUNT];
+ /* for dmadev HW copy mode */
+ uint16_t dmadev_ids[MAX_RX_QUEUES_COUNT];
};
/* Configuring ports and number of assigned lcores in struct. 8< */
@@ -61,13 +60,13 @@ struct ioat_port_statistics {
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
struct ioat_port_statistics port_statistics;
-
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
uint64_t total_packets_rx;
- uint64_t total_successful_enqueues;
- uint64_t total_failed_enqueues;
+ uint64_t total_submitted;
+ uint64_t total_completed;
+ uint64_t total_failed;
};
typedef enum copy_mode_t {
@@ -98,6 +97,15 @@ static unsigned short ring_size = 2048;
/* interval, in seconds, between stats prints */
static unsigned short stats_interval = 1;
+/* global mbuf arrays for tracking DMA bufs */
+#define MBUF_RING_SIZE 2048
+#define MBUF_RING_MASK (MBUF_RING_SIZE - 1)
+struct dma_bufs {
+ struct rte_mbuf *bufs[MBUF_RING_SIZE];
+ struct rte_mbuf *copies[MBUF_RING_SIZE];
+ uint16_t sent;
+};
+static struct dma_bufs dma_bufs[RTE_DMADEV_DEFAULT_MAX];
/* global transmission config */
struct rxtx_transmission_config cfg;
@@ -135,36 +143,32 @@ print_port_stats(uint16_t port_id)
/* Print out statistics for one IOAT rawdev device. */
static void
-print_rawdev_stats(uint32_t dev_id, uint64_t *xstats,
- unsigned int *ids_xstats, uint16_t nb_xstats,
- struct rte_rawdev_xstats_name *names_xstats)
+print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
- uint16_t i;
-
- printf("\nIOAT channel %u", dev_id);
- for (i = 0; i < nb_xstats; i++)
- printf("\n\t %s: %*"PRIu64,
- names_xstats[ids_xstats[i]].name,
- (int)(37 - strlen(names_xstats[ids_xstats[i]].name)),
- xstats[i]);
+ printf("\nDMA channel %u", dev_id);
+ printf("\n\t Total submitted ops: %"PRIu64"", stats.submitted);
+ printf("\n\t Total completed ops: %"PRIu64"", stats.completed);
+ printf("\n\t Total failed ops: %"PRIu64"", stats.errors);
}
static void
print_total_stats(struct total_statistics *ts)
{
printf("\nAggregate statistics ==============================="
- "\nTotal packets Tx: %24"PRIu64" [pps]"
- "\nTotal packets Rx: %24"PRIu64" [pps]"
- "\nTotal packets dropped: %19"PRIu64" [pps]",
+ "\nTotal packets Tx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets Rx: %22"PRIu64" [pkt/s]"
+ "\nTotal packets dropped: %17"PRIu64" [pkt/s]",
ts->total_packets_tx / stats_interval,
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
if (copy_mode == COPY_MODE_IOAT_NUM) {
- printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
- "\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
- ts->total_successful_enqueues / stats_interval,
- ts->total_failed_enqueues / stats_interval);
+ printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
+ "\nTotal completed ops: %19"PRIu64" [ops/s]"
+ "\nTotal failed ops: %22"PRIu64" [ops/s]",
+ ts->total_submitted / stats_interval,
+ ts->total_completed / stats_interval,
+ ts->total_failed / stats_interval);
}
printf("\n====================================================\n");
@@ -175,13 +179,10 @@ static void
print_stats(char *prgname)
{
struct total_statistics ts, delta_ts;
+ struct rte_dma_stats stats = {0};
uint32_t i, port_id, dev_id;
- struct rte_rawdev_xstats_name *names_xstats;
- uint64_t *xstats;
- unsigned int *ids_xstats, nb_xstats;
char status_string[255]; /* to print at the top of the output */
int status_strlen;
- int ret;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -207,48 +208,6 @@ print_stats(char *prgname)
sizeof(status_string) - status_strlen,
"Ring Size = %d", ring_size);
- /* Allocate memory for xstats names and values */
- ret = rte_rawdev_xstats_names_get(
- cfg.ports[0].ioat_ids[0], NULL, 0);
- if (ret < 0)
- return;
- nb_xstats = (unsigned int)ret;
-
- names_xstats = malloc(sizeof(*names_xstats) * nb_xstats);
- if (names_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat names memory\n");
- }
- rte_rawdev_xstats_names_get(cfg.ports[0].ioat_ids[0],
- names_xstats, nb_xstats);
-
- ids_xstats = malloc(sizeof(*ids_xstats) * 2);
- if (ids_xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat ids_xstats memory\n");
- }
-
- xstats = malloc(sizeof(*xstats) * 2);
- if (xstats == NULL) {
- rte_exit(EXIT_FAILURE,
- "Error allocating xstat memory\n");
- }
-
- /* Get failed/successful enqueues stats index */
- ids_xstats[0] = ids_xstats[1] = nb_xstats;
- for (i = 0; i < nb_xstats; i++) {
- if (!strcmp(names_xstats[i].name, "failed_enqueues"))
- ids_xstats[0] = i;
- else if (!strcmp(names_xstats[i].name, "successful_enqueues"))
- ids_xstats[1] = i;
- if (ids_xstats[0] < nb_xstats && ids_xstats[1] < nb_xstats)
- break;
- }
- if (ids_xstats[0] == nb_xstats || ids_xstats[1] == nb_xstats) {
- rte_exit(EXIT_FAILURE,
- "Error getting failed/successful enqueues stats index\n");
- }
-
memset(&ts, 0, sizeof(struct total_statistics));
while (!force_quit) {
@@ -280,17 +239,13 @@ print_stats(char *prgname)
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- dev_id = cfg.ports[i].ioat_ids[j];
- rte_rawdev_xstats_get(dev_id,
- ids_xstats, xstats, 2);
-
- print_rawdev_stats(dev_id, xstats,
- ids_xstats, 2, names_xstats);
+ dev_id = cfg.ports[i].dmadev_ids[j];
+ rte_dma_stats_get(dev_id, 0, &stats);
+ print_dmadev_stats(dev_id, stats);
- delta_ts.total_failed_enqueues +=
- xstats[ids_xstats[0]];
- delta_ts.total_successful_enqueues +=
- xstats[ids_xstats[1]];
+ delta_ts.total_submitted += stats.submitted;
+ delta_ts.total_completed += stats.completed;
+ delta_ts.total_failed += stats.errors;
}
}
}
@@ -298,9 +253,9 @@ print_stats(char *prgname)
delta_ts.total_packets_tx -= ts.total_packets_tx;
delta_ts.total_packets_rx -= ts.total_packets_rx;
delta_ts.total_packets_dropped -= ts.total_packets_dropped;
- delta_ts.total_failed_enqueues -= ts.total_failed_enqueues;
- delta_ts.total_successful_enqueues -=
- ts.total_successful_enqueues;
+ delta_ts.total_submitted -= ts.total_submitted;
+ delta_ts.total_completed -= ts.total_completed;
+ delta_ts.total_failed -= ts.total_failed;
printf("\n");
print_total_stats(&delta_ts);
@@ -310,14 +265,10 @@ print_stats(char *prgname)
ts.total_packets_tx += delta_ts.total_packets_tx;
ts.total_packets_rx += delta_ts.total_packets_rx;
ts.total_packets_dropped += delta_ts.total_packets_dropped;
- ts.total_failed_enqueues += delta_ts.total_failed_enqueues;
- ts.total_successful_enqueues +=
- delta_ts.total_successful_enqueues;
+ ts.total_submitted += delta_ts.total_submitted;
+ ts.total_completed += delta_ts.total_completed;
+ ts.total_failed += delta_ts.total_failed;
}
-
- free(names_xstats);
- free(xstats);
- free(ids_xstats);
}
static void
@@ -361,20 +312,22 @@ static uint32_t
ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
+ struct dma_bufs *dma = &dma_bufs[dev_id];
int ret;
uint32_t i;
for (i = 0; i < nb_rx; i++) {
/* Perform data copy */
- ret = rte_ioat_enqueue_copy(dev_id,
+ ret = rte_dma_copy(dev_id, 0,
rte_pktmbuf_iova(pkts[i]),
rte_pktmbuf_iova(pkts_copy[i]),
- rte_pktmbuf_data_len(pkts[i]),
- (uintptr_t)pkts[i],
- (uintptr_t)pkts_copy[i]);
+ rte_pktmbuf_data_len(pkts[i]), 0);
- if (ret != 1)
+ if (ret < 0)
break;
+
+ dma->bufs[ret & MBUF_RING_MASK] = pkts[i];
+ dma->copies[ret & MBUF_RING_MASK] = pkts_copy[i];
}
ret = i;
@@ -394,7 +347,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
- rte_ioat_perform_ops(dev_id);
+ rte_dma_submit(dev_id, 0);
/* don't try to enqueue more if HW queue is full */
if (n != m)
@@ -408,20 +361,27 @@ static inline uint32_t
ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
- int32_t rc;
+ struct dma_bufs *dma = &dma_bufs[dev_id];
+ uint16_t nb_dq, filled;
/* Dequeue the mbufs from IOAT device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
- rc = rte_ioat_completed_ops(dev_id, num, NULL, NULL,
- (void *)src, (void *)dst);
- if (rc < 0) {
- RTE_LOG(CRIT, IOAT,
- "rte_ioat_completed_ops(%hu) failedi, error: %d\n",
- dev_id, rte_errno);
- rc = 0;
+ nb_dq = rte_dma_completed(dev_id, 0, num, NULL, NULL);
+
+ /* Return early if no work to do */
+ if (unlikely(nb_dq == 0))
+ return nb_dq;
+
+ /* Populate pkts_copy with the copies bufs from dma->copies */
+ for (filled = 0; filled < nb_dq; filled++) {
+ src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
+ dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
}
- return rc;
+ dma->sent += nb_dq;
+
+ return filled;
+
}
/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
@@ -458,7 +418,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* enqueue packets for hardware copy */
nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->ioat_ids[i]);
+ nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
rte_mempool_put_bulk(ioat_pktmbuf_pool,
@@ -473,7 +433,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
/* get completed copies */
nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
- MAX_PKT_BURST, rx_config->ioat_ids[i]);
+ MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
for (j = 0; j < nb_rx; j++)
@@ -540,7 +500,7 @@ rx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main rx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -555,7 +515,7 @@ tx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main tx loop for copy on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering main tx loop for copy on lcore %u\n",
rte_lcore_id());
while (!force_quit)
@@ -570,7 +530,7 @@ rxtx_main_loop(void)
uint16_t i;
uint16_t nb_ports = cfg.nb_ports;
- RTE_LOG(INFO, IOAT, "Entering main rx and tx loop for copy on"
+ RTE_LOG(INFO, DMA, "Entering main rx and tx loop for copy on"
" lcore %u\n", rte_lcore_id());
while (!force_quit)
@@ -585,7 +545,7 @@ static void start_forwarding_cores(void)
{
uint32_t lcore_id = rte_lcore_id();
- RTE_LOG(INFO, IOAT, "Entering %s on lcore %u\n",
+ RTE_LOG(INFO, DMA, "Entering %s on lcore %u\n",
__func__, rte_lcore_id());
if (cfg.nb_lcores == 1) {
@@ -743,6 +703,14 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ioat_usage(prgname);
return -1;
}
+ /* ring_size must be less-than or equal to MBUF_RING_SIZE
+ * to avoid overwriting bufs
+ */
+ if (ring_size > MBUF_RING_SIZE) {
+ printf("Max ring_size is %d, setting ring_size to max",
+ MBUF_RING_SIZE);
+ ring_size = MBUF_RING_SIZE;
+ }
break;
case 'i':
@@ -809,20 +777,28 @@ check_link_status(uint32_t port_mask)
static void
configure_rawdev_queue(uint32_t dev_id)
{
- struct rte_ioat_rawdev_config dev_config = {
- .ring_size = ring_size,
- .no_prefetch_completions = (cfg.nb_lcores > 1),
+ struct rte_dma_info info;
+ struct rte_dma_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dma_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ .nb_desc = ring_size
};
- struct rte_rawdev_info info = { .dev_private = &dev_config };
+ uint16_t vchan = 0;
- if (rte_rawdev_configure(dev_id, &info, sizeof(dev_config)) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_configure()\n");
+ if (rte_dma_configure(dev_id, &dev_config) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_configure()\n");
+
+ if (rte_dma_vchan_setup(dev_id, vchan, &qconf) != 0) {
+ printf("Error with queue configuration\n");
+ rte_panic();
}
- if (rte_rawdev_start(dev_id) != 0) {
- rte_exit(EXIT_FAILURE,
- "Error with rte_rawdev_start()\n");
+ rte_dma_info_get(dev_id, &info);
+ if (info.nb_vchans != 1) {
+ printf("Error, no configured queues reported on device id %u\n", dev_id);
+ rte_panic();
}
+ if (rte_dma_start(dev_id) != 0)
+ rte_exit(EXIT_FAILURE, "Error with rte_dma_start()\n");
}
/* >8 End of configuration of device. */
@@ -830,23 +806,18 @@ configure_rawdev_queue(uint32_t dev_id)
static void
assign_rawdevs(void)
{
- uint16_t nb_rawdev = 0, rdev_id = 0;
+ uint16_t nb_rawdev = 0;
+ int16_t rdev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- struct rte_rawdev_info rdev_info = { 0 };
-
- do {
- if (rdev_id == rte_rawdev_count())
- goto end;
- rte_rawdev_info_get(rdev_id++, &rdev_info, 0);
- } while (rdev_info.driver_name == NULL ||
- strcmp(rdev_info.driver_name,
- IOAT_PMD_RAWDEV_NAME_STR) != 0);
-
- cfg.ports[i].ioat_ids[j] = rdev_id - 1;
- configure_rawdev_queue(cfg.ports[i].ioat_ids[j]);
+ if (rdev_id == -1)
+ goto end;
+
+ cfg.ports[i].dmadev_ids[j] = rdev_id;
+ configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
+ rdev_id = rte_dma_next_dev(rdev_id + 1);
++nb_rawdev;
}
}
@@ -855,7 +826,7 @@ assign_rawdevs(void)
rte_exit(EXIT_FAILURE,
"Not enough IOAT rawdevs (%u) for all queues (%u).\n",
nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, IOAT, "Number of used rawdevs: %u.\n", nb_rawdev);
+ RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
}
/* >8 End of using IOAT rawdev API functions. */
@@ -1015,7 +986,7 @@ rawdev_dump(void)
for (i = 0; i < cfg.nb_ports; i++)
for (j = 0; j < cfg.ports[i].nb_queues; j++)
- rte_rawdev_dump(cfg.ports[i].ioat_ids[j], stdout);
+ rte_dma_dump(cfg.ports[i].dmadev_ids[j], stdout);
}
static void
@@ -1113,15 +1084,15 @@ main(int argc, char **argv)
printf("Closing port %d\n", cfg.ports[i].rxtx_port);
ret = rte_eth_dev_stop(cfg.ports[i].rxtx_port);
if (ret != 0)
- RTE_LOG(ERR, IOAT, "rte_eth_dev_stop: err=%s, port=%u\n",
+ RTE_LOG(ERR, DMA, "rte_eth_dev_stop: err=%s, port=%u\n",
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
if (copy_mode == COPY_MODE_IOAT_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
printf("Stopping rawdev %d\n",
- cfg.ports[i].ioat_ids[j]);
- rte_rawdev_stop(cfg.ports[i].ioat_ids[j]);
+ cfg.ports[i].dmadev_ids[j]);
+ rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
} else /* copy_mode == COPY_MODE_SW_NUM */
rte_ring_free(cfg.ports[i].rx_to_tx_ring);
diff --git a/examples/ioat/meson.build b/examples/ioat/meson.build
index 68bce1ab03..c1dd7c9b29 100644
--- a/examples/ioat/meson.build
+++ b/examples/ioat/meson.build
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2019 Intel Corporation
+# Copyright(c) 2019-2021 Intel Corporation
# meson file, for building this example as part of a main DPDK build.
#
@@ -7,12 +7,8 @@
# DPDK instance, use 'make'
allow_experimental_apis = true
-build = dpdk_conf.has('RTE_RAW_IOAT')
-if not build
- subdir_done()
-endif
-deps += ['raw_ioat']
+deps += ['dmadev']
sources = files(
'ioatfwd.c',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 7/8] examples/ioat: update naming to match change to dmadev
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (5 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
` (2 subsequent siblings)
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
examples/ioat/ioatfwd.c | 189 ++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 95 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index a242588297..8148a3492c 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -53,13 +53,13 @@ struct rxtx_transmission_config {
/* >8 End of configuration of ports and number of assigned lcores. */
/* per-port statistics struct */
-struct ioat_port_statistics {
+struct dma_port_statistics {
uint64_t rx[RTE_MAX_ETHPORTS];
uint64_t tx[RTE_MAX_ETHPORTS];
uint64_t tx_dropped[RTE_MAX_ETHPORTS];
uint64_t copy_dropped[RTE_MAX_ETHPORTS];
};
-struct ioat_port_statistics port_statistics;
+struct dma_port_statistics port_statistics;
struct total_statistics {
uint64_t total_packets_dropped;
uint64_t total_packets_tx;
@@ -72,14 +72,14 @@ struct total_statistics {
typedef enum copy_mode_t {
#define COPY_MODE_SW "sw"
COPY_MODE_SW_NUM,
-#define COPY_MODE_IOAT "hw"
- COPY_MODE_IOAT_NUM,
+#define COPY_MODE_DMA "hw"
+ COPY_MODE_DMA_NUM,
COPY_MODE_INVALID_NUM,
COPY_MODE_SIZE_NUM = COPY_MODE_INVALID_NUM
} copy_mode_t;
/* mask of enabled ports */
-static uint32_t ioat_enabled_port_mask;
+static uint32_t dma_enabled_port_mask;
/* number of RX queues per port */
static uint16_t nb_queues = 1;
@@ -88,9 +88,9 @@ static uint16_t nb_queues = 1;
static int mac_updating = 1;
/* hardare copy mode enabled by default. */
-static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
+static copy_mode_t copy_mode = COPY_MODE_DMA_NUM;
-/* size of IOAT rawdev ring for hardware copy mode or
+/* size of descriptor ring for hardware copy mode or
* rte_ring for software copy mode
*/
static unsigned short ring_size = 2048;
@@ -116,14 +116,14 @@ static uint16_t nb_txd = TX_DEFAULT_RINGSIZE;
static volatile bool force_quit;
-static uint32_t ioat_batch_sz = MAX_PKT_BURST;
+static uint32_t dma_batch_sz = MAX_PKT_BURST;
static uint32_t max_frame_size = RTE_ETHER_MAX_LEN;
/* ethernet addresses of ports */
-static struct rte_ether_addr ioat_ports_eth_addr[RTE_MAX_ETHPORTS];
+static struct rte_ether_addr dma_ports_eth_addr[RTE_MAX_ETHPORTS];
static struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
-struct rte_mempool *ioat_pktmbuf_pool;
+struct rte_mempool *dma_pktmbuf_pool;
/* Print out statistics for one port. */
static void
@@ -141,7 +141,7 @@ print_port_stats(uint16_t port_id)
port_statistics.copy_dropped[port_id]);
}
-/* Print out statistics for one IOAT rawdev device. */
+/* Print out statistics for one dmadev device. */
static void
print_dmadev_stats(uint32_t dev_id, struct rte_dma_stats stats)
{
@@ -162,7 +162,7 @@ print_total_stats(struct total_statistics *ts)
ts->total_packets_rx / stats_interval,
ts->total_packets_dropped / stats_interval);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
printf("\nTotal submitted ops: %19"PRIu64" [ops/s]"
"\nTotal completed ops: %19"PRIu64" [ops/s]"
"\nTotal failed ops: %22"PRIu64" [ops/s]",
@@ -196,7 +196,7 @@ print_stats(char *prgname)
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Copy Mode = %s,\n", copy_mode == COPY_MODE_SW_NUM ?
- COPY_MODE_SW : COPY_MODE_IOAT);
+ COPY_MODE_SW : COPY_MODE_DMA);
status_strlen += snprintf(status_string + status_strlen,
sizeof(status_string) - status_strlen,
"Updating MAC = %s, ", mac_updating ?
@@ -235,7 +235,7 @@ print_stats(char *prgname)
delta_ts.total_packets_rx +=
port_statistics.rx[port_id];
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
uint32_t j;
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
@@ -286,7 +286,7 @@ update_mac_addrs(struct rte_mbuf *m, uint32_t dest_portid)
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_portid << 40);
/* src addr */
- rte_ether_addr_copy(&ioat_ports_eth_addr[dest_portid], ð->src_addr);
+ rte_ether_addr_copy(&dma_ports_eth_addr[dest_portid], ð->src_addr);
}
/* Perform packet copy there is a user-defined function. 8< */
@@ -309,7 +309,7 @@ pktmbuf_sw_copy(struct rte_mbuf *src, struct rte_mbuf *dst)
/* >8 End of perform packet copy there is a user-defined function. */
static uint32_t
-ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t nb_rx, uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
@@ -335,7 +335,7 @@ ioat_enqueue_packets(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
+dma_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
uint32_t num, uint32_t step, uint16_t dev_id)
{
uint32_t i, k, m, n;
@@ -344,7 +344,7 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
for (i = 0; i < num; i += m) {
m = RTE_MIN(step, num - i);
- n = ioat_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
+ n = dma_enqueue_packets(pkts + i, pkts_copy + i, m, dev_id);
k += n;
if (n > 0)
rte_dma_submit(dev_id, 0);
@@ -358,12 +358,12 @@ ioat_enqueue(struct rte_mbuf *pkts[], struct rte_mbuf *pkts_copy[],
}
static inline uint32_t
-ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
+dma_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
uint16_t dev_id)
{
struct dma_bufs *dma = &dma_bufs[dev_id];
uint16_t nb_dq, filled;
- /* Dequeue the mbufs from IOAT device. Since all memory
+ /* Dequeue the mbufs from DMA device. Since all memory
* is DPDK pinned memory and therefore all addresses should
* be valid, we don't check for copy errors
*/
@@ -373,7 +373,7 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
if (unlikely(nb_dq == 0))
return nb_dq;
- /* Populate pkts_copy with the copies bufs from dma->copies */
+ /* Populate pkts_copy with the copies bufs from dma->copies for tx */
for (filled = 0; filled < nb_dq; filled++) {
src[filled] = dma->bufs[(dma->sent + filled) & MBUF_RING_MASK];
dst[filled] = dma->copies[(dma->sent + filled) & MBUF_RING_MASK];
@@ -384,9 +384,9 @@ ioat_dequeue(struct rte_mbuf *src[], struct rte_mbuf *dst[], uint32_t num,
}
-/* Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8< */
+/* Receive packets on one port and enqueue to dmadev or rte_ring. 8< */
static void
-ioat_rx_port(struct rxtx_port_config *rx_config)
+dma_rx_port(struct rxtx_port_config *rx_config)
{
int32_t ret;
uint32_t nb_rx, nb_enq, i, j;
@@ -403,7 +403,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
port_statistics.rx[rx_config->rxtx_port] += nb_rx;
- ret = rte_mempool_get_bulk(ioat_pktmbuf_pool,
+ ret = rte_mempool_get_bulk(dma_pktmbuf_pool,
(void *)pkts_burst_copy, nb_rx);
if (unlikely(ret < 0))
@@ -414,17 +414,16 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pktmbuf_metadata_copy(pkts_burst[j],
pkts_burst_copy[j]);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
-
+ if (copy_mode == COPY_MODE_DMA_NUM) {
/* enqueue packets for hardware copy */
- nb_enq = ioat_enqueue(pkts_burst, pkts_burst_copy,
- nb_rx, ioat_batch_sz, rx_config->dmadev_ids[i]);
+ nb_enq = dma_enqueue(pkts_burst, pkts_burst_copy,
+ nb_rx, dma_batch_sz, rx_config->dmadev_ids[i]);
/* free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst[nb_enq],
nb_rx - nb_enq);
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -432,7 +431,7 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
/* get completed copies */
- nb_rx = ioat_dequeue(pkts_burst, pkts_burst_copy,
+ nb_rx = dma_dequeue(pkts_burst, pkts_burst_copy,
MAX_PKT_BURST, rx_config->dmadev_ids[i]);
} else {
/* Perform packet software copy, free source packets */
@@ -441,14 +440,14 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
pkts_burst_copy[j]);
}
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)pkts_burst, nb_rx);
nb_enq = rte_ring_enqueue_burst(rx_config->rx_to_tx_ring,
(void *)pkts_burst_copy, nb_rx, NULL);
/* Free any not enqueued packets. */
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&pkts_burst_copy[nb_enq],
nb_rx - nb_enq);
@@ -456,11 +455,11 @@ ioat_rx_port(struct rxtx_port_config *rx_config)
(nb_rx - nb_enq);
}
}
-/* >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring. */
+/* >8 End of receive packets on one port and enqueue to dmadev or rte_ring. */
-/* Transmit packets from IOAT rawdev/rte_ring for one port. 8< */
+/* Transmit packets from dmadev/rte_ring for one port. 8< */
static void
-ioat_tx_port(struct rxtx_port_config *tx_config)
+dma_tx_port(struct rxtx_port_config *tx_config)
{
uint32_t i, j, nb_dq, nb_tx;
struct rte_mbuf *mbufs[MAX_PKT_BURST];
@@ -487,13 +486,13 @@ ioat_tx_port(struct rxtx_port_config *tx_config)
/* Free any unsent packets. */
if (unlikely(nb_tx < nb_dq))
- rte_mempool_put_bulk(ioat_pktmbuf_pool,
+ rte_mempool_put_bulk(dma_pktmbuf_pool,
(void *)&mbufs[nb_tx], nb_dq - nb_tx);
}
}
-/* >8 End of transmitting packets from IOAT. */
+/* >8 End of transmitting packets from dmadev. */
-/* Main rx processing loop for IOAT rawdev. */
+/* Main rx processing loop for dmadev. */
static void
rx_main_loop(void)
{
@@ -505,7 +504,7 @@ rx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_rx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
}
/* Main tx processing loop for hardware copy. */
@@ -520,7 +519,7 @@ tx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++)
- ioat_tx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
/* Main rx and tx loop if only one worker lcore available */
@@ -535,8 +534,8 @@ rxtx_main_loop(void)
while (!force_quit)
for (i = 0; i < nb_ports; i++) {
- ioat_rx_port(&cfg.ports[i]);
- ioat_tx_port(&cfg.ports[i]);
+ dma_rx_port(&cfg.ports[i]);
+ dma_tx_port(&cfg.ports[i]);
}
}
@@ -566,7 +565,7 @@ static void start_forwarding_cores(void)
/* Display usage */
static void
-ioat_usage(const char *prgname)
+dma_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -b --dma-batch-size: number of requests per DMA batch\n"
@@ -578,13 +577,13 @@ ioat_usage(const char *prgname)
" - The source MAC address is replaced by the TX port MAC address\n"
" - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
" -c --copy-type CT: type of copy: sw|hw\n"
- " -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+ " -s --ring-size RS: size of dmadev descriptor ring for hardware copy mode or rte_ring for software copy mode\n"
" -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
prgname);
}
static int
-ioat_parse_portmask(const char *portmask)
+dma_parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
@@ -598,19 +597,19 @@ ioat_parse_portmask(const char *portmask)
}
static copy_mode_t
-ioat_parse_copy_mode(const char *copy_mode)
+dma_parse_copy_mode(const char *copy_mode)
{
if (strcmp(copy_mode, COPY_MODE_SW) == 0)
return COPY_MODE_SW_NUM;
- else if (strcmp(copy_mode, COPY_MODE_IOAT) == 0)
- return COPY_MODE_IOAT_NUM;
+ else if (strcmp(copy_mode, COPY_MODE_DMA) == 0)
+ return COPY_MODE_DMA_NUM;
return COPY_MODE_INVALID_NUM;
}
/* Parse the argument given in the command line of the application */
static int
-ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
+dma_parse_args(int argc, char **argv, unsigned int nb_ports)
{
static const char short_options[] =
"b:" /* dma batch size */
@@ -641,7 +640,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
int option_index;
char *prgname = argv[0];
- ioat_enabled_port_mask = default_port_mask;
+ dma_enabled_port_mask = default_port_mask;
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, short_options,
@@ -649,10 +648,10 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
switch (opt) {
case 'b':
- ioat_batch_sz = atoi(optarg);
- if (ioat_batch_sz > MAX_PKT_BURST) {
+ dma_batch_sz = atoi(optarg);
+ if (dma_batch_sz > MAX_PKT_BURST) {
printf("Invalid dma batch size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -660,19 +659,19 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
max_frame_size = atoi(optarg);
if (max_frame_size > RTE_ETHER_MAX_JUMBO_FRAME_LEN) {
printf("Invalid max frame size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
/* portmask */
case 'p':
- ioat_enabled_port_mask = ioat_parse_portmask(optarg);
- if (ioat_enabled_port_mask & ~default_port_mask ||
- ioat_enabled_port_mask <= 0) {
+ dma_enabled_port_mask = dma_parse_portmask(optarg);
+ if (dma_enabled_port_mask & ~default_port_mask ||
+ dma_enabled_port_mask <= 0) {
printf("Invalid portmask, %s, suggest 0x%x\n",
optarg, default_port_mask);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -682,16 +681,16 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
if (nb_queues == 0 || nb_queues > MAX_RX_QUEUES_COUNT) {
printf("Invalid RX queues number %s. Max %u\n",
optarg, MAX_RX_QUEUES_COUNT);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
case 'c':
- copy_mode = ioat_parse_copy_mode(optarg);
+ copy_mode = dma_parse_copy_mode(optarg);
if (copy_mode == COPY_MODE_INVALID_NUM) {
printf("Invalid copy type. Use: sw, hw\n");
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
break;
@@ -700,7 +699,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
ring_size = atoi(optarg);
if (ring_size == 0) {
printf("Invalid ring size, %s.\n", optarg);
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
/* ring_size must be less-than or equal to MBUF_RING_SIZE
@@ -726,7 +725,7 @@ ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
break;
default:
- ioat_usage(prgname);
+ dma_usage(prgname);
return -1;
}
}
@@ -775,7 +774,7 @@ check_link_status(uint32_t port_mask)
/* Configuration of device. 8< */
static void
-configure_rawdev_queue(uint32_t dev_id)
+configure_dmadev_queue(uint32_t dev_id)
{
struct rte_dma_info info;
struct rte_dma_conf dev_config = { .nb_vchans = 1 };
@@ -802,33 +801,33 @@ configure_rawdev_queue(uint32_t dev_id)
}
/* >8 End of configuration of device. */
-/* Using IOAT rawdev API functions. 8< */
+/* Using dmadev API functions. 8< */
static void
-assign_rawdevs(void)
+assign_dmadevs(void)
{
- uint16_t nb_rawdev = 0;
- int16_t rdev_id = rte_dma_next_dev(0);
+ uint16_t nb_dmadev = 0;
+ int16_t dev_id = rte_dma_next_dev(0);
uint32_t i, j;
for (i = 0; i < cfg.nb_ports; i++) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- if (rdev_id == -1)
+ if (dev_id == -1)
goto end;
- cfg.ports[i].dmadev_ids[j] = rdev_id;
- configure_rawdev_queue(cfg.ports[i].dmadev_ids[j]);
- rdev_id = rte_dma_next_dev(rdev_id + 1);
- ++nb_rawdev;
+ cfg.ports[i].dmadev_ids[j] = dev_id;
+ configure_dmadev_queue(cfg.ports[i].dmadev_ids[j]);
+ dev_id = rte_dma_next_dev(dev_id + 1);
+ ++nb_dmadev;
}
}
end:
- if (nb_rawdev < cfg.nb_ports * cfg.ports[0].nb_queues)
+ if (nb_dmadev < cfg.nb_ports * cfg.ports[0].nb_queues)
rte_exit(EXIT_FAILURE,
- "Not enough IOAT rawdevs (%u) for all queues (%u).\n",
- nb_rawdev, cfg.nb_ports * cfg.ports[0].nb_queues);
- RTE_LOG(INFO, DMA, "Number of used rawdevs: %u.\n", nb_rawdev);
+ "Not enough dmadevs (%u) for all queues (%u).\n",
+ nb_dmadev, cfg.nb_ports * cfg.ports[0].nb_queues);
+ RTE_LOG(INFO, DMA, "Number of used dmadevs: %u.\n", nb_dmadev);
}
-/* >8 End of using IOAT rawdev API functions. */
+/* >8 End of using dmadev API functions. */
/* Assign ring structures for packet exchanging. 8< */
static void
@@ -883,7 +882,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
local_port_conf.rxmode.mtu = max_frame_size;
/* Skip ports that are not enabled */
- if ((ioat_enabled_port_mask & (1 << portid)) == 0) {
+ if ((dma_enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %u\n", portid);
return;
}
@@ -910,7 +909,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
"Cannot adjust number of descriptors: err=%d, port=%u\n",
ret, portid);
- rte_eth_macaddr_get(portid, &ioat_ports_eth_addr[portid]);
+ rte_eth_macaddr_get(portid, &dma_ports_eth_addr[portid]);
/* Init RX queues */
rxq_conf = dev_info.default_rxconf;
@@ -969,7 +968,7 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
printf("Port %u, MAC address: " RTE_ETHER_ADDR_PRT_FMT "\n\n",
portid,
- RTE_ETHER_ADDR_BYTES(&ioat_ports_eth_addr[portid]));
+ RTE_ETHER_ADDR_BYTES(&dma_ports_eth_addr[portid]));
cfg.ports[cfg.nb_ports].rxtx_port = portid;
cfg.ports[cfg.nb_ports++].nb_queues = nb_queues;
@@ -977,11 +976,11 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
/* Get a device dump for each device being used by the application */
static void
-rawdev_dump(void)
+dmadev_dump(void)
{
uint32_t i, j;
- if (copy_mode != COPY_MODE_IOAT_NUM)
+ if (copy_mode != COPY_MODE_DMA_NUM)
return;
for (i = 0; i < cfg.nb_ports; i++)
@@ -997,7 +996,7 @@ signal_handler(int signum)
signum);
force_quit = true;
} else if (signum == SIGUSR1) {
- rawdev_dump();
+ dmadev_dump();
}
}
@@ -1028,9 +1027,9 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* Parse application arguments (after the EAL ones) */
- ret = ioat_parse_args(argc, argv, nb_ports);
+ ret = dma_parse_args(argc, argv, nb_ports);
if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid IOAT arguments\n");
+ rte_exit(EXIT_FAILURE, "Invalid DMA arguments\n");
/* Allocates mempool to hold the mbufs. 8< */
nb_mbufs = RTE_MAX(nb_ports * (nb_queues * (nb_rxd + nb_txd +
@@ -1041,23 +1040,23 @@ main(int argc, char **argv)
/* Create the mbuf pool */
sz = max_frame_size + RTE_PKTMBUF_HEADROOM;
sz = RTE_MAX(sz, (size_t)RTE_MBUF_DEFAULT_BUF_SIZE);
- ioat_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
+ dma_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", nb_mbufs,
MEMPOOL_CACHE_SIZE, 0, sz, rte_socket_id());
- if (ioat_pktmbuf_pool == NULL)
+ if (dma_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
/* >8 End of allocates mempool to hold the mbufs. */
/* Initialize each port. 8< */
cfg.nb_ports = 0;
RTE_ETH_FOREACH_DEV(portid)
- port_init(portid, ioat_pktmbuf_pool, nb_queues);
+ port_init(portid, dma_pktmbuf_pool, nb_queues);
/* >8 End of initializing each port. */
/* Initialize port xstats */
memset(&port_statistics, 0, sizeof(port_statistics));
/* Assigning each port resources. 8< */
- while (!check_link_status(ioat_enabled_port_mask) && !force_quit)
+ while (!check_link_status(dma_enabled_port_mask) && !force_quit)
sleep(1);
/* Check if there is enough lcores for all ports. */
@@ -1066,8 +1065,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE,
"There should be at least one worker lcore.\n");
- if (copy_mode == COPY_MODE_IOAT_NUM)
- assign_rawdevs();
+ if (copy_mode == COPY_MODE_DMA_NUM)
+ assign_dmadevs();
assign_rings();
/* >8 End of assigning each port resources. */
@@ -1088,9 +1087,9 @@ main(int argc, char **argv)
rte_strerror(-ret), cfg.ports[i].rxtx_port);
rte_eth_dev_close(cfg.ports[i].rxtx_port);
- if (copy_mode == COPY_MODE_IOAT_NUM) {
+ if (copy_mode == COPY_MODE_DMA_NUM) {
for (j = 0; j < cfg.ports[i].nb_queues; j++) {
- printf("Stopping rawdev %d\n",
+ printf("Stopping dmadev %d\n",
cfg.ports[i].dmadev_ids[j]);
rte_dma_stop(cfg.ports[i].dmadev_ids[j]);
}
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* [dpdk-dev] [PATCH v5 8/8] examples/ioat: rename application to dmafwd
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (6 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
@ 2021-10-26 13:14 ` Kevin Laatz
2021-10-27 13:23 ` [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev Thomas Monjalon
2021-10-27 14:54 ` Thomas Monjalon
9 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-26 13:14 UTC (permalink / raw)
To: dev; +Cc: thomas, bruce.richardson, fengchengwen, conor.walsh, Kevin Laatz
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
.../sample_app_ug/{ioat.rst => dma.rst} | 102 +++++++++---------
doc/guides/sample_app_ug/index.rst | 2 +-
doc/guides/sample_app_ug/intro.rst | 4 +-
examples/{ioat => dma}/Makefile | 4 +-
examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 0
examples/{ioat => dma}/meson.build | 2 +-
examples/meson.build | 2 +-
7 files changed, 58 insertions(+), 58 deletions(-)
rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (75%)
rename examples/{ioat => dma}/Makefile (97%)
rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (100%)
rename examples/{ioat => dma}/meson.build (94%)
diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/dma.rst
similarity index 75%
rename from doc/guides/sample_app_ug/ioat.rst
rename to doc/guides/sample_app_ug/dma.rst
index 1edad3f9ac..4b8e607774 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/dma.rst
@@ -1,17 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2019 Intel Corporation.
+ Copyright(c) 2019-2021 Intel Corporation.
.. include:: <isonum.txt>
-Packet copying using Intel\ |reg| QuickData Technology
-======================================================
+Packet copying using DMAdev library
+===================================
Overview
--------
This sample is intended as a demonstration of the basic components of a DPDK
-forwarding application and example of how to use IOAT driver API to make
-packets copies.
+forwarding application and example of how to use the DMAdev API to make a packet
+copy application.
Also while forwarding, the MAC addresses are affected as follows:
@@ -29,7 +29,7 @@ Compiling the Application
To compile the sample application see :doc:`compiling`.
-The application is located in the ``ioat`` sub-directory.
+The application is located in the ``dma`` sub-directory.
Running the Application
@@ -38,8 +38,8 @@ Running the Application
In order to run the hardware copy application, the copying device
needs to be bound to user-space IO driver.
-Refer to the "IOAT Rawdev Driver" chapter in the "Rawdev Drivers" document
-for information on using the driver.
+Refer to the "DMAdev library" chapter in the "Programmers guide" for information
+on using the library.
The application requires a number of command line options:
@@ -52,13 +52,13 @@ where,
* p MASK: A hexadecimal bitmask of the ports to configure (default is all)
-* q NQ: Number of Rx queues used per port equivalent to CBDMA channels
+* q NQ: Number of Rx queues used per port equivalent to DMA channels
per port (default is 1)
* c CT: Performed packet copy type: software (sw) or hardware using
DMA (hw) (default is hw)
-* s RS: Size of IOAT rawdev ring for hardware copy mode or rte_ring for
+* s RS: Size of dmadev descriptor ring for hardware copy mode or rte_ring for
software copy mode (default is 2048)
* --[no-]mac-updating: Whether MAC address of packets should be changed
@@ -87,7 +87,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-2 -n 2 -- -p 0x1 --mac-updating -c sw
To run the application in a Linux environment with 2 lcores (the main lcore,
plus one forwarding core), 2 ports (ports 0 and 1), hardware copying and no MAC
@@ -95,7 +95,7 @@ updating issue the command:
.. code-block:: console
- $ ./<build_dir>/examples/dpdk-ioat -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
+ $ ./<build_dir>/examples/dpdk-dma -l 0-1 -n 1 -- -p 0x3 --no-mac-updating -c hw
Refer to the *DPDK Getting Started Guide* for general information on
running applications and the Environment Abstraction Layer (EAL) options.
@@ -120,7 +120,7 @@ The first task is to initialize the Environment Abstraction Layer (EAL).
The ``argc`` and ``argv`` arguments are provided to the ``rte_eal_init()``
function. The value returned is the number of parsed arguments:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Init EAL. 8<
:end-before: >8 End of init EAL.
@@ -130,7 +130,7 @@ function. The value returned is the number of parsed arguments:
The ``main()`` also allocates a mempool to hold the mbufs (Message Buffers)
used by the application:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Allocates mempool to hold the mbufs. 8<
:end-before: >8 End of allocates mempool to hold the mbufs.
@@ -141,7 +141,7 @@ detail in the "Mbuf Library" section of the *DPDK Programmer's Guide*.
The ``main()`` function also initializes the ports:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Initialize each port. 8<
:end-before: >8 End of initializing each port.
@@ -151,9 +151,9 @@ Each port is configured using ``port_init()`` function. The Ethernet
ports are configured with local settings using the ``rte_eth_dev_configure()``
function and the ``port_conf`` struct. The RSS is enabled so that
multiple Rx queues could be used for packet receiving and copying by
-multiple CBDMA channels per port:
+multiple DMA channels per port:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring port to use RSS for multiple RX queues. 8<
:end-before: >8 End of configuring port to use RSS for multiple RX queues.
@@ -165,7 +165,7 @@ and ``rte_eth_tx_queue_setup()`` functions.
The Ethernet port is then started:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start device. 8<
:end-before: >8 End of starting device.
@@ -174,7 +174,7 @@ The Ethernet port is then started:
Finally the Rx port is set in promiscuous mode:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: RX port is set in promiscuous mode. 8<
:end-before: >8 End of RX port is set in promiscuous mode.
@@ -183,7 +183,7 @@ Finally the Rx port is set in promiscuous mode:
After that each port application assigns resources needed.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assigning each port resources. 8<
:end-before: >8 End of assigning each port resources.
@@ -192,30 +192,30 @@ After that each port application assigns resources needed.
Ring structures are assigned for exchanging packets between lcores for both SW
and HW copy modes.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Assign ring structures for packet exchanging. 8<
:end-before: >8 End of assigning ring structures for packet exchanging.
:dedent: 0
-When using hardware copy each Rx queue of the port is assigned an
-IOAT device (``assign_rawdevs()``) using IOAT Rawdev Driver API
-functions:
+When using hardware copy each Rx queue of the port is assigned a DMA device
+(``assign_dmadevs()``) using DMAdev library API functions:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Using IOAT rawdev API functions. 8<
- :end-before: >8 End of using IOAT rawdev API functions.
+ :start-after: Using dmadev API functions. 8<
+ :end-before: >8 End of using dmadev API functions.
:dedent: 0
-The initialization of hardware device is done by ``rte_rawdev_configure()``
-function using ``rte_rawdev_info`` struct. After configuration the device is
-started using ``rte_rawdev_start()`` function. Each of the above operations
-is done in ``configure_rawdev_queue()``.
+The initialization of hardware device is done by ``rte_dma_configure()`` and
+``rte_dma_vchan_setup()`` functions using the ``rte_dma_conf`` and
+``rte_dma_vchan_conf`` structs. After configuration the device is started
+using ``rte_dma_start()`` function. Each of the above operations is done in
+``configure_dmadev_queue()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuration of device. 8<
:end-before: >8 End of configuration of device.
@@ -237,7 +237,7 @@ The Lcores Launching Functions
As described above, ``main()`` function invokes ``start_forwarding_cores()``
function in order to start processing for each lcore:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Start processing for each lcore. 8<
:end-before: >8 End of starting to processfor each lcore.
@@ -248,7 +248,7 @@ using ``rte_eal_remote_launch()``. The configured ports, their number
and number of assigned lcores are stored in user-defined
``rxtx_transmission_config`` struct:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Configuring ports and number of assigned lcores in struct. 8<
:end-before: >8 End of configuration of ports and number of assigned lcores.
@@ -260,32 +260,32 @@ corresponding to ports and lcores configuration provided by the user.
The Lcores Processing Functions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For receiving packets on each port, the ``ioat_rx_port()`` function is used.
+For receiving packets on each port, the ``dma_rx_port()`` function is used.
The function receives packets on each configured Rx queue. Depending on the
-mode the user chose, it will enqueue packets to IOAT rawdev channels and
+mode the user chose, it will enqueue packets to DMA channels and
then invoke copy process (hardware copy), or perform software copy of each
packet using ``pktmbuf_sw_copy()`` function and enqueue them to an rte_ring:
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
The packets are received in burst mode using ``rte_eth_rx_burst()``
function. When using hardware copy mode the packets are enqueued in
-copying device's buffer using ``ioat_enqueue_packets()`` which calls
-``rte_ioat_enqueue_copy()``. When all received packets are in the
-buffer the copy operations are started by calling ``rte_ioat_perform_ops()``.
-Function ``rte_ioat_enqueue_copy()`` operates on physical address of
+copying device's buffer using ``dma_enqueue_packets()`` which calls
+``rte_dma_copy()``. When all received packets are in the
+buffer the copy operations are started by calling ``rte_dma_submit()``.
+Function ``rte_dma_copy()`` operates on physical address of
the packet. Structure ``rte_mbuf`` contains only physical address to
start of the data buffer (``buf_iova``). Thus the ``rte_pktmbuf_iova()`` API is
used to get the address of the start of the data within the mbuf.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Receive packets on one port and enqueue to IOAT rawdev or rte_ring. 8<
- :end-before: >8 End of receive packets on one port and enqueue to IOAT rawdev or rte_ring.
+ :start-after: Receive packets on one port and enqueue to dmadev or rte_ring. 8<
+ :end-before: >8 End of receive packets on one port and enqueue to dmadev or rte_ring.
:dedent: 0
@@ -293,15 +293,15 @@ Once the copies have been completed (this includes gathering the completions in
HW copy mode), the copied packets are enqueued to the ``rx_to_tx_ring``, which
is used to pass the packets to the TX function.
-All completed copies are processed by ``ioat_tx_port()`` function. This function
+All completed copies are processed by ``dma_tx_port()`` function. This function
dequeues copied packets from the ``rx_to_tx_ring``. Then each packet MAC address is changed
if it was enabled. After that copies are sent in burst mode using ``rte_eth_tx_burst()``.
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
- :start-after: Transmit packets from IOAT rawdev/rte_ring for one port. 8<
- :end-before: >8 End of transmitting packets from IOAT.
+ :start-after: Transmit packets from dmadev/rte_ring for one port. 8<
+ :end-before: >8 End of transmitting packets from dmadev.
:dedent: 0
The Packet Copying Functions
@@ -311,7 +311,7 @@ In order to perform SW packet copy, there are user-defined functions to first co
the packet metadata (``pktmbuf_metadata_copy()``) and then the packet data
(``pktmbuf_sw_copy()``):
-.. literalinclude:: ../../../examples/ioat/ioatfwd.c
+.. literalinclude:: ../../../examples/dma/dmafwd.c
:language: c
:start-after: Perform packet copy there is a user-defined function. 8<
:end-before: >8 End of perform packet copy there is a user-defined function.
diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst
index e8db83d3a7..8835dd03ac 100644
--- a/doc/guides/sample_app_ug/index.rst
+++ b/doc/guides/sample_app_ug/index.rst
@@ -22,7 +22,7 @@ Sample Applications User Guides
ip_reassembly
kernel_nic_interface
keep_alive
- ioat
+ dma
l2_forward_crypto
l2_forward_job_stats
l2_forward_real_virtual
diff --git a/doc/guides/sample_app_ug/intro.rst b/doc/guides/sample_app_ug/intro.rst
index 8ff223b16c..e765f1fd6b 100644
--- a/doc/guides/sample_app_ug/intro.rst
+++ b/doc/guides/sample_app_ug/intro.rst
@@ -58,8 +58,8 @@ examples are highlighted below.
forwarding Graph, or ``l3fwd_graph`` application does forwarding based on IPv4
like a simple router with DPDK Graph framework.
-* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
- or ``ioatfwd`` application demonstrates how to use IOAT rawdev driver for
+* :doc:`Hardware packet copying<dma>`: The Hardware packet copying,
+ or ``dmafwd`` application demonstrates how to use DMAdev library for
copying packets between two threads.
* :doc:`Packet Distributor<dist_app>`: The Packet Distributor
diff --git a/examples/ioat/Makefile b/examples/dma/Makefile
similarity index 97%
rename from examples/ioat/Makefile
rename to examples/dma/Makefile
index 178fc8778c..59af6478b7 100644
--- a/examples/ioat/Makefile
+++ b/examples/dma/Makefile
@@ -2,10 +2,10 @@
# Copyright(c) 2019 Intel Corporation
# binary name
-APP = ioatfwd
+APP = dmafwd
# all source are stored in SRCS-y
-SRCS-y := ioatfwd.c
+SRCS-y := dmafwd.c
PKGCONF ?= pkg-config
diff --git a/examples/ioat/ioatfwd.c b/examples/dma/dmafwd.c
similarity index 100%
rename from examples/ioat/ioatfwd.c
rename to examples/dma/dmafwd.c
diff --git a/examples/ioat/meson.build b/examples/dma/meson.build
similarity index 94%
rename from examples/ioat/meson.build
rename to examples/dma/meson.build
index c1dd7c9b29..9fdcad660e 100644
--- a/examples/ioat/meson.build
+++ b/examples/dma/meson.build
@@ -11,5 +11,5 @@ allow_experimental_apis = true
deps += ['dmadev']
sources = files(
- 'ioatfwd.c',
+ 'dmafwd.c',
)
diff --git a/examples/meson.build b/examples/meson.build
index 07e682401b..d50f09db12 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -12,13 +12,13 @@ all_examples = [
'bond',
'cmdline',
'distributor',
+ 'dma',
'ethtool',
'eventdev_pipeline',
'fips_validation',
'flow_classify',
'flow_filtering',
'helloworld',
- 'ioat',
'ip_fragmentation',
'ip_pipeline',
'ip_reassembly',
--
2.30.2
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (7 preceding siblings ...)
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
@ 2021-10-27 13:23 ` Thomas Monjalon
2021-10-27 13:35 ` Kevin Laatz
2021-10-27 14:54 ` Thomas Monjalon
9 siblings, 1 reply; 63+ messages in thread
From: Thomas Monjalon @ 2021-10-27 13:23 UTC (permalink / raw)
To: Kevin Laatz; +Cc: dev, bruce.richardson, fengchengwen, conor.walsh
26/10/2021 15:14, Kevin Laatz:
> .../sample_app_ug/{ioat.rst => dma.rst} | 149 ++--
> doc/guides/sample_app_ug/index.rst | 2 +-
> doc/guides/sample_app_ug/intro.rst | 4 +-
> examples/{ioat => dma}/Makefile | 4 +-
> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 638 ++++++++++--------
> examples/{ioat => dma}/meson.build | 10 +-
> examples/meson.build | 2 +-
> 7 files changed, 433 insertions(+), 376 deletions(-)
> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
> rename examples/{ioat => dma}/Makefile (97%)
> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
> rename examples/{ioat => dma}/meson.build (63%)
The file MAINTAINERS is not updated, I'll try to fix it myself.
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-10-27 13:23 ` [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev Thomas Monjalon
@ 2021-10-27 13:35 ` Kevin Laatz
2021-10-27 14:07 ` Thomas Monjalon
0 siblings, 1 reply; 63+ messages in thread
From: Kevin Laatz @ 2021-10-27 13:35 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, bruce.richardson, fengchengwen, conor.walsh
On 27/10/2021 14:23, Thomas Monjalon wrote:
> 26/10/2021 15:14, Kevin Laatz:
>> .../sample_app_ug/{ioat.rst => dma.rst} | 149 ++--
>> doc/guides/sample_app_ug/index.rst | 2 +-
>> doc/guides/sample_app_ug/intro.rst | 4 +-
>> examples/{ioat => dma}/Makefile | 4 +-
>> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 638 ++++++++++--------
>> examples/{ioat => dma}/meson.build | 10 +-
>> examples/meson.build | 2 +-
>> 7 files changed, 433 insertions(+), 376 deletions(-)
>> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
>> rename examples/{ioat => dma}/Makefile (97%)
>> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
>> rename examples/{ioat => dma}/meson.build (63%)
> The file MAINTAINERS is not updated, I'll try to fix it myself.
>
>
Hi Thomas, apologies this must have gotten dropped in a rebase or I
forgot to commit it!
I was going to add the following to the "Other Example Applications"
section:
DMA example
M: Kevin Laatz <kevin.laatz@intel.com>
M: Bruce Richardson <bruce.richardson@intel.com>
F: examples/dma/
F: doc/guides/sample_app_ug/dma.rst
And the equivalent files for ioatfwd would need to be removed from the
Rawdev drivers sections since they have been replaced.
If you're happy to add yourself, thanks! Otherwise I don't mind sending
a v6 quickly if that's better.
/Kevin
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-10-27 13:35 ` Kevin Laatz
@ 2021-10-27 14:07 ` Thomas Monjalon
2021-10-27 14:14 ` Kevin Laatz
0 siblings, 1 reply; 63+ messages in thread
From: Thomas Monjalon @ 2021-10-27 14:07 UTC (permalink / raw)
To: Kevin Laatz; +Cc: dev, bruce.richardson, fengchengwen, conor.walsh
27/10/2021 15:35, Kevin Laatz:
> On 27/10/2021 14:23, Thomas Monjalon wrote:
> > 26/10/2021 15:14, Kevin Laatz:
> >> .../sample_app_ug/{ioat.rst => dma.rst} | 149 ++--
> >> doc/guides/sample_app_ug/index.rst | 2 +-
> >> doc/guides/sample_app_ug/intro.rst | 4 +-
> >> examples/{ioat => dma}/Makefile | 4 +-
> >> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 638 ++++++++++--------
> >> examples/{ioat => dma}/meson.build | 10 +-
> >> examples/meson.build | 2 +-
> >> 7 files changed, 433 insertions(+), 376 deletions(-)
> >> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
> >> rename examples/{ioat => dma}/Makefile (97%)
> >> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
> >> rename examples/{ioat => dma}/meson.build (63%)
> > The file MAINTAINERS is not updated, I'll try to fix it myself.
> >
> >
>
> Hi Thomas, apologies this must have gotten dropped in a rebase or I
> forgot to commit it!
>
> I was going to add the following to the "Other Example Applications"
> section:
>
> DMA example
> M: Kevin Laatz <kevin.laatz@intel.com>
> M: Bruce Richardson <bruce.richardson@intel.com>
> F: examples/dma/
> F: doc/guides/sample_app_ug/dma.rst
Actually it would better fit in the existing section "DMA device API".
> And the equivalent files for ioatfwd would need to be removed from the
> Rawdev drivers sections since they have been replaced.
You mean removing the rst file?
> If you're happy to add yourself, thanks! Otherwise I don't mind sending
> a v6 quickly if that's better.
I am already on it.
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-10-27 14:07 ` Thomas Monjalon
@ 2021-10-27 14:14 ` Kevin Laatz
0 siblings, 0 replies; 63+ messages in thread
From: Kevin Laatz @ 2021-10-27 14:14 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, bruce.richardson, fengchengwen, conor.walsh
On 27/10/2021 15:07, Thomas Monjalon wrote:
> 27/10/2021 15:35, Kevin Laatz:
>> On 27/10/2021 14:23, Thomas Monjalon wrote:
>>> 26/10/2021 15:14, Kevin Laatz:
>>>> .../sample_app_ug/{ioat.rst => dma.rst} | 149 ++--
>>>> doc/guides/sample_app_ug/index.rst | 2 +-
>>>> doc/guides/sample_app_ug/intro.rst | 4 +-
>>>> examples/{ioat => dma}/Makefile | 4 +-
>>>> examples/{ioat/ioatfwd.c => dma/dmafwd.c} | 638 ++++++++++--------
>>>> examples/{ioat => dma}/meson.build | 10 +-
>>>> examples/meson.build | 2 +-
>>>> 7 files changed, 433 insertions(+), 376 deletions(-)
>>>> rename doc/guides/sample_app_ug/{ioat.rst => dma.rst} (64%)
>>>> rename examples/{ioat => dma}/Makefile (97%)
>>>> rename examples/{ioat/ioatfwd.c => dma/dmafwd.c} (60%)
>>>> rename examples/{ioat => dma}/meson.build (63%)
>>> The file MAINTAINERS is not updated, I'll try to fix it myself.
>>>
>>>
>> Hi Thomas, apologies this must have gotten dropped in a rebase or I
>> forgot to commit it!
>>
>> I was going to add the following to the "Other Example Applications"
>> section:
>>
>> DMA example
>> M: Kevin Laatz <kevin.laatz@intel.com>
>> M: Bruce Richardson <bruce.richardson@intel.com>
>> F: examples/dma/
>> F: doc/guides/sample_app_ug/dma.rst
> Actually it would better fit in the existing section "DMA device API".
>
>> And the equivalent files for ioatfwd would need to be removed from the
>> Rawdev drivers sections since they have been replaced.
> You mean removing the rst file?
Removing these two:
F: examples/ioat/
F: doc/guides/sample_app_ug/ioat.rst
>
>> If you're happy to add yourself, thanks! Otherwise I don't mind sending
>> a v6 quickly if that's better.
> I am already on it.
>
OK, thanks!
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
` (8 preceding siblings ...)
2021-10-27 13:23 ` [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev Thomas Monjalon
@ 2021-10-27 14:54 ` Thomas Monjalon
9 siblings, 0 replies; 63+ messages in thread
From: Thomas Monjalon @ 2021-10-27 14:54 UTC (permalink / raw)
To: Kevin Laatz; +Cc: dev, bruce.richardson, fengchengwen, conor.walsh
26/10/2021 15:14, Kevin Laatz:
> This patchset first adds some additional command line options to the
> existing ioatfwd application to enhance usability.
>
> The last 3 patches of this set then port the ioatfwd application to use the
> dmadev library APIs instead of the IOAT rawdev APIs. Following the port,
> all variables etc are renamed to be more appropriate for using with the
> DMAdev library. Lastly, the application itself is renamed to "dmafwd".
Applied, thanks.
^ permalink raw reply [flat|nested] 63+ messages in thread
end of thread, other threads:[~2021-10-27 14:54 UTC | newest]
Thread overview: 63+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-10 17:27 [dpdk-dev] [PATCH 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-09-10 17:27 ` [dpdk-dev] [PATCH 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 1/6] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-23 15:33 ` Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 2/6] examples/ioat: add cmd-line option to control DMA batch size Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 3/6] examples/ioat: add cmd line option to control max frame size Kevin Laatz
2021-09-20 11:24 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 4/6] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-24 4:00 ` fengchengwen
2021-09-24 8:40 ` Kevin Laatz
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 5/6] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-17 16:41 ` [dpdk-dev] [PATCH v2 6/6] examples/ioat: rename application to dmafwd Kevin Laatz
2021-09-20 11:25 ` Conor Walsh
2021-09-23 13:53 ` [dpdk-dev] [PATCH v2 0/6] port ioatfwd app to dmadev fengchengwen
2021-09-23 14:00 ` Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 0/8] " Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
2021-09-29 10:32 ` Conor Walsh
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
2021-09-29 10:33 ` Conor Walsh
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-09-28 16:29 ` [dpdk-dev] [PATCH v3 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-10-14 9:53 ` [dpdk-dev] [PATCH v4 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
2021-10-22 19:48 ` [dpdk-dev] [PATCH v4 0/8] port ioatfwd app to dmadev Thomas Monjalon
2021-10-25 19:59 ` Kevin Laatz
2021-10-26 0:56 ` fengchengwen
2021-10-26 11:46 ` Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 " Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 1/8] examples/ioat: always use same lcore for both DMA requests enqueue and dequeue Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 2/8] examples/ioat: add cmd line option to control DMA batch size Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 3/8] examples/ioat: add cmd line option to control max frame size Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 4/8] examples/ioat: add cmd line option to control stats print interval Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 5/8] examples/ioat: add signal-triggered device dumps Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 6/8] examples/ioat: port application to dmadev APIs Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 7/8] examples/ioat: update naming to match change to dmadev Kevin Laatz
2021-10-26 13:14 ` [dpdk-dev] [PATCH v5 8/8] examples/ioat: rename application to dmafwd Kevin Laatz
2021-10-27 13:23 ` [dpdk-dev] [PATCH v5 0/8] port ioatfwd app to dmadev Thomas Monjalon
2021-10-27 13:35 ` Kevin Laatz
2021-10-27 14:07 ` Thomas Monjalon
2021-10-27 14:14 ` Kevin Laatz
2021-10-27 14:54 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).