* [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
@ 2018-11-22 12:09 Ian Stokes
2018-11-22 12:11 ` Ferruh Yigit
2018-11-22 18:27 ` Ferruh Yigit
0 siblings, 2 replies; 6+ messages in thread
From: Ian Stokes @ 2018-11-22 12:09 UTC (permalink / raw)
To: dev; +Cc: stephen, arybchenko, Ian Stokes
Maximum and minimum MTU values vary between hardware devices. In
hardware agnostic DPDK applications access to such information would
allow a more accurate way of validating and setting supported MTU values on
a per device basis rather than using a defined default for all devices.
The following solution was proposed:
http://mails.dpdk.org/archives/dev/2018-September/110959.html
This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
members will be added to represent min and max MTU values. These can be
added to fit a hole in the existing structure for amd64 but not for 32 bit,
as such ABI change will occur as size of the structure will be impacted.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
---
doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 34b28234c..da2b1ce15 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -49,6 +49,18 @@ Deprecation Notices
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
+* ethdev: Maximum and minimum MTU values vary between hardware devices. In
+ hardware agnostic DPDK applications access to such information would allow
+ a more accurate way of validating and setting supported MTU values on a per
+ device basis rather than using a defined default for all devices. To
+ resolve this, the following members will be added to ``rte_eth_dev_info``.
+ Note: these can be added to fit a hole in the existing structure for amd64
+ but not for 32 bit, as such ABI change will occur as size of the structure
+ will increase.
+
+ - Member ``uint16_t min_mtu`` the minimum MTU allowed.
+ - Member ``uint16_t max_mtu`` the maximum MTU allowed.
+
* pdump: As we changed to use generic IPC, some changes in APIs and structure
are expected in subsequent release.
--
2.13.6
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
2018-11-22 12:09 [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info Ian Stokes
@ 2018-11-22 12:11 ` Ferruh Yigit
2018-11-22 17:15 ` Thomas Monjalon
2018-11-22 18:27 ` Ferruh Yigit
1 sibling, 1 reply; 6+ messages in thread
From: Ferruh Yigit @ 2018-11-22 12:11 UTC (permalink / raw)
To: Ian Stokes, dev; +Cc: stephen, arybchenko
On 11/22/2018 12:09 PM, Ian Stokes wrote:
> Maximum and minimum MTU values vary between hardware devices. In
> hardware agnostic DPDK applications access to such information would
> allow a more accurate way of validating and setting supported MTU values on
> a per device basis rather than using a defined default for all devices.
>
> The following solution was proposed:
>
> http://mails.dpdk.org/archives/dev/2018-September/110959.html
>
> This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
> members will be added to represent min and max MTU values. These can be
> added to fit a hole in the existing structure for amd64 but not for 32 bit,
> as such ABI change will occur as size of the structure will be impacted.
>
> Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
> doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
> index 34b28234c..da2b1ce15 100644
> --- a/doc/guides/rel_notes/deprecation.rst
> +++ b/doc/guides/rel_notes/deprecation.rst
> @@ -49,6 +49,18 @@ Deprecation Notices
> Target release for removal of the legacy API will be defined once most
> PMDs have switched to rte_flow.
>
> +* ethdev: Maximum and minimum MTU values vary between hardware devices. In
> + hardware agnostic DPDK applications access to such information would allow
> + a more accurate way of validating and setting supported MTU values on a per
> + device basis rather than using a defined default for all devices. To
> + resolve this, the following members will be added to ``rte_eth_dev_info``.
> + Note: these can be added to fit a hole in the existing structure for amd64
> + but not for 32 bit, as such ABI change will occur as size of the structure
> + will increase.
> +
> + - Member ``uint16_t min_mtu`` the minimum MTU allowed.
> + - Member ``uint16_t max_mtu`` the maximum MTU allowed.
> +
> * pdump: As we changed to use generic IPC, some changes in APIs and structure
> are expected in subsequent release.
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
2018-11-22 12:11 ` Ferruh Yigit
@ 2018-11-22 17:15 ` Thomas Monjalon
2018-11-24 17:37 ` Thomas Monjalon
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Monjalon @ 2018-11-22 17:15 UTC (permalink / raw)
To: Ian Stokes; +Cc: dev, Ferruh Yigit, stephen, arybchenko
22/11/2018 13:11, Ferruh Yigit:
> On 11/22/2018 12:09 PM, Ian Stokes wrote:
> > Maximum and minimum MTU values vary between hardware devices. In
> > hardware agnostic DPDK applications access to such information would
> > allow a more accurate way of validating and setting supported MTU values on
> > a per device basis rather than using a defined default for all devices.
> >
> > The following solution was proposed:
> >
> > http://mails.dpdk.org/archives/dev/2018-September/110959.html
> >
> > This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
> > members will be added to represent min and max MTU values. These can be
> > added to fit a hole in the existing structure for amd64 but not for 32 bit,
> > as such ABI change will occur as size of the structure will be impacted.
> >
> > Signed-off-by: Ian Stokes <ian.stokes@intel.com>
>
> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
[...]
> > +* ethdev: Maximum and minimum MTU values vary between hardware devices. In
> > + hardware agnostic DPDK applications access to such information would allow
> > + a more accurate way of validating and setting supported MTU values on a per
> > + device basis rather than using a defined default for all devices. To
> > + resolve this, the following members will be added to ``rte_eth_dev_info``.
> > + Note: these can be added to fit a hole in the existing structure for amd64
> > + but not for 32 bit, as such ABI change will occur as size of the structure
> > + will increase.
> > +
> > + - Member ``uint16_t min_mtu`` the minimum MTU allowed.
> > + - Member ``uint16_t max_mtu`` the maximum MTU allowed.
> > +
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
2018-11-22 17:15 ` Thomas Monjalon
@ 2018-11-24 17:37 ` Thomas Monjalon
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2018-11-24 17:37 UTC (permalink / raw)
To: Ian Stokes; +Cc: dev, Ferruh Yigit, stephen, arybchenko
22/11/2018 18:15, Thomas Monjalon:
> 22/11/2018 13:11, Ferruh Yigit:
> > On 11/22/2018 12:09 PM, Ian Stokes wrote:
> > > Maximum and minimum MTU values vary between hardware devices. In
> > > hardware agnostic DPDK applications access to such information would
> > > allow a more accurate way of validating and setting supported MTU values on
> > > a per device basis rather than using a defined default for all devices.
> > >
> > > The following solution was proposed:
> > >
> > > http://mails.dpdk.org/archives/dev/2018-September/110959.html
> > >
> > > This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
> > > members will be added to represent min and max MTU values. These can be
> > > added to fit a hole in the existing structure for amd64 but not for 32 bit,
> > > as such ABI change will occur as size of the structure will be impacted.
> > >
> > > Signed-off-by: Ian Stokes <ian.stokes@intel.com>
> >
> > Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
> Acked-by: Thomas Monjalon <thomas@monjalon.net>
> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Applied
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
2018-11-22 12:09 [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info Ian Stokes
2018-11-22 12:11 ` Ferruh Yigit
@ 2018-11-22 18:27 ` Ferruh Yigit
2018-11-23 8:08 ` Andrew Rybchenko
1 sibling, 1 reply; 6+ messages in thread
From: Ferruh Yigit @ 2018-11-22 18:27 UTC (permalink / raw)
To: Ian Stokes, dev
Cc: stephen, arybchenko, Qi Zhang, Shahaf Shuler, Alejandro Lucero,
Rahul Lakkireddy
On 11/22/2018 12:09 PM, Ian Stokes wrote:
> Maximum and minimum MTU values vary between hardware devices. In
> hardware agnostic DPDK applications access to such information would
> allow a more accurate way of validating and setting supported MTU values on
> a per device basis rather than using a defined default for all devices.
>
> The following solution was proposed:
>
> http://mails.dpdk.org/archives/dev/2018-September/110959.html
>
> This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
> members will be added to represent min and max MTU values. These can be
> added to fit a hole in the existing structure for amd64 but not for 32 bit,
> as such ABI change will occur as size of the structure will be impacted.
>
> Signed-off-by: Ian Stokes <ian.stokes@intel.com>
> ---
> doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
> index 34b28234c..da2b1ce15 100644
> --- a/doc/guides/rel_notes/deprecation.rst
> +++ b/doc/guides/rel_notes/deprecation.rst
> @@ -49,6 +49,18 @@ Deprecation Notices
> Target release for removal of the legacy API will be defined once most
> PMDs have switched to rte_flow.
>
> +* ethdev: Maximum and minimum MTU values vary between hardware devices. In
> + hardware agnostic DPDK applications access to such information would allow
> + a more accurate way of validating and setting supported MTU values on a per
> + device basis rather than using a defined default for all devices. To
> + resolve this, the following members will be added to ``rte_eth_dev_info``.
> + Note: these can be added to fit a hole in the existing structure for amd64
> + but not for 32 bit, as such ABI change will occur as size of the structure
> + will increase.
> +
> + - Member ``uint16_t min_mtu`` the minimum MTU allowed.
> + - Member ``uint16_t max_mtu`` the maximum MTU allowed.
> +
> * pdump: As we changed to use generic IPC, some changes in APIs and structure
> are expected in subsequent release.
>
>
cc'ed a few more folks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info.
2018-11-22 18:27 ` Ferruh Yigit
@ 2018-11-23 8:08 ` Andrew Rybchenko
0 siblings, 0 replies; 6+ messages in thread
From: Andrew Rybchenko @ 2018-11-23 8:08 UTC (permalink / raw)
To: Ferruh Yigit, Ian Stokes, dev
Cc: stephen, Qi Zhang, Shahaf Shuler, Alejandro Lucero, Rahul Lakkireddy
On 11/22/18 9:27 PM, Ferruh Yigit wrote:
> On 11/22/2018 12:09 PM, Ian Stokes wrote:
>> Maximum and minimum MTU values vary between hardware devices. In
>> hardware agnostic DPDK applications access to such information would
>> allow a more accurate way of validating and setting supported MTU values on
>> a per device basis rather than using a defined default for all devices.
>>
>> The following solution was proposed:
>>
>> http://mails.dpdk.org/archives/dev/2018-September/110959.html
>>
>> This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
>> members will be added to represent min and max MTU values. These can be
>> added to fit a hole in the existing structure for amd64 but not for 32 bit,
>> as such ABI change will occur as size of the structure will be impacted.
>>
>> Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-11-24 17:37 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-22 12:09 [dpdk-dev] [PATCH v1 1/1] doc: announce ethdev ABI change for rte_eth_dev_info Ian Stokes
2018-11-22 12:11 ` Ferruh Yigit
2018-11-22 17:15 ` Thomas Monjalon
2018-11-24 17:37 ` Thomas Monjalon
2018-11-22 18:27 ` Ferruh Yigit
2018-11-23 8:08 ` Andrew Rybchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).