Re: [dpdk-dev] [PATCH v3 7/7] app/testpmd: adjust ethdev port ownership

[Thomas Monjalon <thomas@monjalon.net>]

24/01/2018 19:30, Ananyev, Konstantin:
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > 23/01/2018 22:18, Ananyev, Konstantin:
> > > >
> > > > 23/01/2018 16:18, Ananyev, Konstantin:
> > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ananyev, Konstantin
> > > > > > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > > > > > > 23/01/2018 14:34, Ananyev, Konstantin:
> > > > > > > > If that' s the use case, then I think you need to set device ownership at creation time -
> > > > > > > > inside dev_allocate().
> > > > > > > > Again that would avoid such racing conditions inside testpmd.
> > > > > > >
> > > > > > > The devices must be allocated at a low level layer.
> > > > > >
> > > > > > No one arguing about that.
> > > > > > But we can provide owner id information to the low level.
> > > >
> > > > Sorry, you did not get it.
> > >
> > > Might be.
> > >
> > > > We cannot provide owner id at the low level
> > > > because it is not yet decided who will be the owner
> > > > before the port is allocated.
> > >
> > > Why is that?
> > > What prevents us decide who will manage that device *before* allocating port of it?
> > > IMO we do have all needed information at that stage.
> > 
> > We don't have the information.
> 
> At that point we do have dev name and all parameters, right?

We just have the PCI id.

> Plus we do have blacklist/whitelist, etc.
> So what else are we missing to make the decision at that point? 

It depends on the ownership policy.
Example: we can decide to take ownership based on a MAC address.
Another example: it can be decided to take ownership of a given driver.
We don't have these informations with the PCI id.

> > It is a new device, it is matched by a driver which allocates a port.
> > I don't see where the higher level can interact here.
> > And even if you manage a trick, the higher level needs to read the port
> > informations to decide the ownership.
> 
> Could you specify what particular port information it needs?

Replied to the same question above :)


> > > > > > > When a new device appears (hotplug), an ethdev port should be allocated
> > > > > > > automatically if it passes the whitelist/blacklist policy test.
> > > > > > > Then we must decide who will manage this device.
> > > > > > > I suggest notifying the DPDK libs first.
> > > > > > > So a DPDK lib or PMD like failsafe can have the priority to take the
> > > > > > > ownership in its notification callback.
> > > > > >
> > > > > > Possible, but seems a bit overcomplicated.
> > > > > > Why not just:
> > > > > >
> > > > > > Have a global variable process_default_owner_id, that would be init once at startup.
> > > > > > Have an LTS variable default_owner_id.
> > > > > > It will be used by rte_eth_dev_allocate() caller can set dev->owner_id at creation time,
> > > > > > so port allocation and setting ownership - will be an atomic operation.
> > > > > > At the exit rte_eth_dev_allocate() will always reset default_owner_id=0:
> > > > > >
> > > > > > rte_eth_dev_allocate(...)
> > > > > > {
> > > > > >    lock(owner_lock);
> > > > > >    <allocate_port>
> > > > > >    owner = RTE_PER_LCORE(default_owner_id);
> > > > > >    if (owner == 0)
> > > > > >        owner = process_default_owner_id;
> > > > > >   set_owner(port, ..., owner);
> > > > > >  unlock(owner_lock);
> > > > > >  RTE_PER_LCORE(default_owner_id) = 0;
> > > > >
> > > > > Or probably better to leave default_owner_id reset to the caller.
> > > > > Another thing - we can use same LTS variable in all control ops to
> > > > > allow/disallow changing of port configuration based on ownership.
> > > > > Konstantin
> > > > >
> > > > > > }
> > > > > >
> > > > > > So callers who don't need any special ownership - don't need to do anything.
> > > > > > Special callers (like failsafe) can set default_owenr_id just before calling hotplug
> > > > > > handling routine.
> > > >
> > > > No, hotplug will not be a routine.
> > > > I am talking about real hotplug, like a device which appears in the VM.
> > > > This new device must be handled by EAL and probed automatically if
> > > > comply with whitelist/blacklist policy given by the application or user.
> > > > Real hotplug is asynchronous.
> > >
> > > By 'asynchronous' here you mean it would be handled in the EAL interrupt thread
> > > or something different?
> > 
> > Yes, we receive an hotplug event which is processed in the event thread.
> > 
> > > Anyway, I suppose  you do need a function inside DPDK that will do the actual work in response
> > > on hotplug event, right?
> > 
> > Yes
> 
> Ok, btw why that function has to be always called from interrupt thread?
> Why not to allow user to decide?

Absolutely, the user must decide.
In the example of failsafe, the user instructs a policy to decide
which devices will be owned, so failsafe takes the decision based
on user inputs.

> Some apps have their own thread dedicated for control ops (like testpmd)
> For them it might be plausible to call that function from their own control thread context.
> Konstantin
> 
> > 
> > > That's what I refer to as 'hotplug routine' above.
> > >
> > > > We will just receive notifications that it appeared.
> > > >
> > > > Note: there is some temporary code in failsafe to manage some hotplug.
> > > > This code must be removed when it will be properly handled in EAL.
> > >
> > > Ok, if it is just a temporary code, that would be removed soon -
> > > then it definitely seems wrong to modify tespmd (or any other user app)
> > > to comply with that temporary solution.
> > 
> > It will be modified when EAL hotplug will be implemented.
> > 
> > However, the ownership issue will be the same:
> > we don't know the owner when allocating a port.