* [dpdk-dev] [PATCH 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 @ 2017-06-28 11:48 Pablo de Lara 2017-06-28 11:48 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara ` (2 more replies) 0 siblings, 3 replies; 11+ messages in thread From: Pablo de Lara @ 2017-06-28 11:48 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara Intel IPSec Multi-buffer library v0.46 has been released, which among other features, adds support for 12-byte IVs for AES Counter mode (AES-CTR), since IPSec requires only 12 bytes from the user, which are appended 4 extra bytes, set to 1 always. There are no major changes made in the PMD, just documentation updates and new capability for new IV size supported. Pablo de Lara (2): crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 test/crypto: add 12-byte IV AES-CTR test cases doc/guides/cryptodevs/aesni_mb.rst | 18 ++- doc/guides/rel_notes/release_17_08.rst | 6 + drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 +- test/test/test_cryptodev_aes_test_vectors.h | 186 +++++++++++++++++++++++++ 4 files changed, 211 insertions(+), 3 deletions(-) -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 2017-06-28 11:48 [dpdk-dev] [PATCH 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara @ 2017-06-28 11:48 ` Pablo de Lara 2017-06-30 13:52 ` Sergio Gonzalez Monroy 2017-06-28 11:48 ` [dpdk-dev] [PATCH 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2 siblings, 1 reply; 11+ messages in thread From: Pablo de Lara @ 2017-06-28 11:48 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara IPSec Multi-buffer library v0.46 has been released, which includes, among othe features, support for 12-byte IV, for AES-CTR, keeping also the previous 16-byte IV, for backward compatibility reasons. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> --- doc/guides/cryptodevs/aesni_mb.rst | 18 +++++++++++++++++- doc/guides/rel_notes/release_17_08.rst | 6 ++++++ drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 ++-- 3 files changed, 25 insertions(+), 3 deletions(-) diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst index ecb52a1..fafcd9f 100644 --- a/doc/guides/cryptodevs/aesni_mb.rst +++ b/doc/guides/cryptodevs/aesni_mb.rst @@ -69,6 +69,9 @@ Limitations * Chained mbufs are not supported. * Only in-place is currently supported (destination address is the same as source address). * Only supports session-oriented API implementation (session-less APIs are not supported). +* If IV is passed with 16 bytes, last 4 bytes will be ignored, as underlying library only + requires 12 bytes and will append 4 bytes (counter) at the end. + The library always set these 4 bytes to 1, as IPSec requires counter to be set to 1. Installation ------------ @@ -95,7 +98,7 @@ and the Multi-Buffer library version supported by them: ============= ============================ 2.2 - 16.11 0.43 - 0.44 17.02 0.44 - 17.05 0.45 + 17.05 - 17.08 0.45 - 0.46 ============= ============================ @@ -131,3 +134,16 @@ Example: .. code-block:: console ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_aesni_mb,socket_id=1,max_nb_sessions=128" + +Extra notes +----------- + +For AES Counter mode (AES-CTR), the library supports two different sizes for Initialization +Vector (IV): + +* 12 bytes: used mainly for IPSec, as it requires 12 bytes from the user, which internally + are appended the counter block (4 bytes), which is set to 1 for the first block + (no padding required from the user) + +* 16 bytes: when passing 16 bytes, the library will take them and use the last 4 bytes + as the initial counter block for the first block. diff --git a/doc/guides/rel_notes/release_17_08.rst b/doc/guides/rel_notes/release_17_08.rst index 842f46f..3d9500a 100644 --- a/doc/guides/rel_notes/release_17_08.rst +++ b/doc/guides/rel_notes/release_17_08.rst @@ -75,6 +75,12 @@ New Features Added support for firmwares with multiple Ethernet ports per physical port. +* **Updated the AESNI MB PMD.** + + The AESNI MB PMD has been updated with additional support for: + + * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV. + Resolved Issues --------------- diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c index d1bc28e..82630be 100644 --- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c +++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c @@ -220,9 +220,9 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = { .increment = 8 }, .iv_size = { - .min = 16, + .min = 12, .max = 16, - .increment = 0 + .increment = 4 } }, } }, } -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 2017-06-28 11:48 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara @ 2017-06-30 13:52 ` Sergio Gonzalez Monroy 2017-07-02 10:46 ` De Lara Guarch, Pablo 0 siblings, 1 reply; 11+ messages in thread From: Sergio Gonzalez Monroy @ 2017-06-30 13:52 UTC (permalink / raw) To: Pablo de Lara, declan.doherty; +Cc: dev On 28/06/2017 12:48, Pablo de Lara wrote: > IPSec Multi-buffer library v0.46 has been released, > which includes, among othe features, support for 12-byte IV, > for AES-CTR, keeping also the previous 16-byte IV, > for backward compatibility reasons. > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> > --- > doc/guides/cryptodevs/aesni_mb.rst | 18 +++++++++++++++++- > doc/guides/rel_notes/release_17_08.rst | 6 ++++++ > drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 ++-- > 3 files changed, 25 insertions(+), 3 deletions(-) > > diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst > index ecb52a1..fafcd9f 100644 > --- a/doc/guides/cryptodevs/aesni_mb.rst > +++ b/doc/guides/cryptodevs/aesni_mb.rst > @@ -69,6 +69,9 @@ Limitations > * Chained mbufs are not supported. > * Only in-place is currently supported (destination address is the same as source address). > * Only supports session-oriented API implementation (session-less APIs are not supported). > +* If IV is passed with 16 bytes, last 4 bytes will be ignored, as underlying library only > + requires 12 bytes and will append 4 bytes (counter) at the end. > + The library always set these 4 bytes to 1, as IPSec requires counter to be set to 1. I don't think the text above is correct. Thanks, Sergio > > Installation > ------------ > @@ -95,7 +98,7 @@ and the Multi-Buffer library version supported by them: > ============= ============================ > 2.2 - 16.11 0.43 - 0.44 > 17.02 0.44 > - 17.05 0.45 > + 17.05 - 17.08 0.45 - 0.46 > ============= ============================ > > > @@ -131,3 +134,16 @@ Example: > .. code-block:: console > > ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_aesni_mb,socket_id=1,max_nb_sessions=128" > + > +Extra notes > +----------- > + > +For AES Counter mode (AES-CTR), the library supports two different sizes for Initialization > +Vector (IV): > + > +* 12 bytes: used mainly for IPSec, as it requires 12 bytes from the user, which internally > + are appended the counter block (4 bytes), which is set to 1 for the first block > + (no padding required from the user) > + > +* 16 bytes: when passing 16 bytes, the library will take them and use the last 4 bytes > + as the initial counter block for the first block. > diff --git a/doc/guides/rel_notes/release_17_08.rst b/doc/guides/rel_notes/release_17_08.rst > index 842f46f..3d9500a 100644 > --- a/doc/guides/rel_notes/release_17_08.rst > +++ b/doc/guides/rel_notes/release_17_08.rst > @@ -75,6 +75,12 @@ New Features > > Added support for firmwares with multiple Ethernet ports per physical port. > > +* **Updated the AESNI MB PMD.** > + > + The AESNI MB PMD has been updated with additional support for: > + > + * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV. > + > > Resolved Issues > --------------- > diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c > index d1bc28e..82630be 100644 > --- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c > +++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c > @@ -220,9 +220,9 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = { > .increment = 8 > }, > .iv_size = { > - .min = 16, > + .min = 12, > .max = 16, > - .increment = 0 > + .increment = 4 > } > }, } > }, } ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 2017-06-30 13:52 ` Sergio Gonzalez Monroy @ 2017-07-02 10:46 ` De Lara Guarch, Pablo 0 siblings, 0 replies; 11+ messages in thread From: De Lara Guarch, Pablo @ 2017-07-02 10:46 UTC (permalink / raw) To: Gonzalez Monroy, Sergio, Doherty, Declan; +Cc: dev > -----Original Message----- > From: Gonzalez Monroy, Sergio > Sent: Friday, June 30, 2017 2:52 PM > To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Doherty, > Declan <declan.doherty@intel.com> > Cc: dev@dpdk.org > Subject: Re: [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi- > buffer lib v0.46 > > On 28/06/2017 12:48, Pablo de Lara wrote: > > IPSec Multi-buffer library v0.46 has been released, which includes, > > among othe features, support for 12-byte IV, for AES-CTR, keeping also > > the previous 16-byte IV, for backward compatibility reasons. > > > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> > > --- > > doc/guides/cryptodevs/aesni_mb.rst | 18 +++++++++++++++++- > > doc/guides/rel_notes/release_17_08.rst | 6 ++++++ > > drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 ++-- > > 3 files changed, 25 insertions(+), 3 deletions(-) > > > > diff --git a/doc/guides/cryptodevs/aesni_mb.rst > > b/doc/guides/cryptodevs/aesni_mb.rst > > index ecb52a1..fafcd9f 100644 > > --- a/doc/guides/cryptodevs/aesni_mb.rst > > +++ b/doc/guides/cryptodevs/aesni_mb.rst > > @@ -69,6 +69,9 @@ Limitations > > * Chained mbufs are not supported. > > * Only in-place is currently supported (destination address is the same > as source address). > > * Only supports session-oriented API implementation (session-less APIs > are not supported). > > +* If IV is passed with 16 bytes, last 4 bytes will be ignored, as > > +underlying library only > > + requires 12 bytes and will append 4 bytes (counter) at the end. > > + The library always set these 4 bytes to 1, as IPSec requires counter to > be set to 1. > > I don't think the text above is correct. Forgot to remove that, well spotted! Will send a v2 shortly. Thanks, Pablo ^ permalink raw reply [flat|nested] 11+ messages in thread
* [dpdk-dev] [PATCH 2/2] test/crypto: add 12-byte IV AES-CTR test cases 2017-06-28 11:48 [dpdk-dev] [PATCH 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-06-28 11:48 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara @ 2017-06-28 11:48 ` Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2 siblings, 0 replies; 11+ messages in thread From: Pablo de Lara @ 2017-06-28 11:48 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara AESNI MB PMD supports now 12-byte IVs, so some tests are added to check that, apart from the ones with 16-byte IVs, as this is still compatible. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> --- test/test/test_cryptodev_aes_test_vectors.h | 186 ++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) diff --git a/test/test/test_cryptodev_aes_test_vectors.h b/test/test/test_cryptodev_aes_test_vectors.h index 07d6eab..6ebc1c5 100644 --- a/test/test/test_cryptodev_aes_test_vectors.h +++ b/test/test/test_cryptodev_aes_test_vectors.h @@ -56,6 +56,17 @@ static const uint8_t ciphertext64_aes128ctr[] = { 0x79, 0x21, 0x70, 0xA0, 0xF3, 0x00, 0x9C, 0xEE }; +static const uint8_t ciphertext64_aes128ctr_IV_12bytes[] = { + 0x28, 0x80, 0x28, 0xC7, 0x15, 0x99, 0xC5, 0xA8, + 0xDD, 0x53, 0xC2, 0x67, 0x1B, 0x86, 0xB8, 0x13, + 0xAB, 0x25, 0x39, 0x7A, 0xD2, 0x1F, 0x8B, 0x4B, + 0x94, 0x89, 0x2B, 0x65, 0xCF, 0x89, 0x1E, 0xDD, + 0xD4, 0x7C, 0xFD, 0x8D, 0x0E, 0xCD, 0x23, 0xA4, + 0xEB, 0x8C, 0x05, 0x58, 0x45, 0x4A, 0x63, 0x44, + 0x11, 0x42, 0x07, 0x17, 0xB4, 0xD2, 0xCC, 0x75, + 0xB7, 0x23, 0x99, 0xA9, 0xC5, 0x89, 0x7F, 0x66 +}; + static const uint8_t plaintext_aes_docsis_bpi_cfb[] = { 0x00, 0x01, 0x02, 0x88, 0xEE, 0x59, 0x7E }; @@ -98,6 +109,17 @@ static const uint8_t ciphertext64_aes192ctr[] = { 0x59, 0x5E, 0x9E, 0xA5, 0x7B, 0x2D, 0xD7, 0xF0 }; +static const uint8_t ciphertext64_aes192ctr_IV_12bytes[] = { + 0x67, 0x65, 0xa9, 0xee, 0xfd, 0x31, 0x62, 0xfc, + 0xad, 0xfd, 0xc7, 0x25, 0xb7, 0x25, 0x16, 0xbe, + 0x25, 0xce, 0xc0, 0x1d, 0xda, 0xa9, 0xd3, 0xda, + 0x1b, 0x7d, 0x68, 0x6a, 0x6f, 0x06, 0xea, 0x47, + 0xa0, 0xe0, 0x15, 0xf4, 0xbd, 0x1b, 0x70, 0x34, + 0xd4, 0x6d, 0x1c, 0x84, 0x17, 0x91, 0x46, 0x0c, + 0xe8, 0xbc, 0x7a, 0xfb, 0x9f, 0x2a, 0x8f, 0xb4, + 0xd4, 0xf3, 0x6e, 0x5b, 0x75, 0xa0, 0xce, 0x32 +}; + static const uint8_t plaintext_aes256ctr[] = { 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96, 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A, @@ -120,6 +142,17 @@ static const uint8_t ciphertext64_aes256ctr[] = { 0x13, 0xC2, 0xDD, 0x08, 0x45, 0x79, 0x41, 0xA6 }; +static const uint8_t ciphertext64_aes256ctr_IV_12bytes[] = { + 0x7B, 0x7A, 0x7D, 0x83, 0x85, 0xF8, 0x81, 0xF3, + 0x32, 0x33, 0xD9, 0xFB, 0x04, 0x73, 0xD4, 0x2F, + 0x70, 0xDE, 0x90, 0x3E, 0xD0, 0xA9, 0x93, 0x8A, + 0x91, 0xF3, 0xB5, 0x29, 0x4D, 0x2A, 0x74, 0xD0, + 0xDC, 0x4E, 0x5C, 0x9B, 0x97, 0x24, 0xD8, 0x02, + 0xFE, 0xAB, 0x38, 0xE8, 0x73, 0x51, 0x29, 0x7E, + 0xF1, 0xF9, 0x40, 0x78, 0xB1, 0x04, 0x7A, 0x78, + 0x61, 0x07, 0x47, 0xE6, 0x8C, 0x0F, 0xA8, 0x76 +}; + static const uint8_t plaintext_aes_common[] = { "What a lousy earth! He wondered how many people " "were destitute that same night even in his own " @@ -352,6 +385,141 @@ static const struct blockcipher_test_data aes_test_data_3 = { } }; +/* AES128-CTR-SHA1 test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_1_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, + 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C + }, + .len = 16 + }, + .iv = { + .data = { + 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, 0xFB + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes128ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes128ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .auth_key = { + .data = { + 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA, + 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD, + 0xDE, 0xF4, 0xDE, 0xAD + }, + .len = 20 + }, + .digest = { + .data = { + 0x5C, 0x34, 0x6B, 0xE4, 0x9A, 0x7F, 0x4A, 0xC3, + 0x82, 0xBE, 0xA0, 0x12, 0xD1, 0xF0, 0x15, 0xFA, + 0xCF, 0xC8, 0x7F, 0x60 + }, + .len = 20, + .truncated_len = 12 + } +}; + +/** AES-192-CTR XCBC test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_2_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0xCB, 0xC5, 0xED, 0x5B, 0xE7, 0x7C, 0xBD, 0x8C, + 0x50, 0xD9, 0x30, 0xF2, 0xB5, 0x6A, 0x0E, 0x5F, + 0xAA, 0xAE, 0xAD, 0xA2, 0x1F, 0x49, 0x52, 0xD4 + }, + .len = 24 + }, + .iv = { + .data = { + 0x3F, 0x69, 0xA8, 0xCD, 0xE8, 0xF0, 0xEF, 0x40, + 0xB8, 0x7A, 0x4B, 0xED + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes192ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes192ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC, + .auth_key = { + .data = { + 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51, + 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59 + }, + .len = 16 + }, + .digest = { + .data = { + 0x0C, 0xA1, 0xA5, 0xAF, 0x3E, 0x41, 0xD2, 0xF4, + 0x4C, 0x4C, 0xAB, 0x13 + }, + .len = 12, + .truncated_len = 12 + } +}; + +/** AES-256-CTR SHA1 test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_3_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE, + 0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81, + 0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7, + 0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4 + }, + .len = 32 + }, + .iv = { + .data = { + 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, 0xFB + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes256ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes256ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .auth_key = { + .data = { + 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA, + 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD, + 0xDE, 0xF4, 0xDE, 0xAD + }, + .len = 20 + }, + .digest = { + .data = { + 0x57, 0x9A, 0x52, 0x6E, 0x31, 0x17, 0x57, 0x49, + 0xE7, 0xA1, 0x88, 0x6C, 0x2E, 0x36, 0x67, 0x63, + 0x3F, 0x2D, 0xA3, 0xEF + }, + .len = 20, + .truncated_len = 12 + } +}; /** AES-128-CBC SHA1 test vector */ static const struct blockcipher_test_data aes_test_data_4 = { .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC, @@ -1447,6 +1615,24 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = { BLOCKCIPHER_TEST_TARGET_PMD_MB | BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER }, + { + .test_descr = "AES-128-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_1_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + }, + { + .test_descr = "AES-192-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_2_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + }, + { + .test_descr = "AES-256-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_3_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + } }; static const struct blockcipher_test_case aes_docsis_test_cases[] = { -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 2017-06-28 11:48 [dpdk-dev] [PATCH 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-06-28 11:48 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara 2017-06-28 11:48 ` [dpdk-dev] [PATCH 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara @ 2017-07-02 2:55 ` Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara ` (2 more replies) 2 siblings, 3 replies; 11+ messages in thread From: Pablo de Lara @ 2017-07-02 2:55 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara Intel IPSec Multi-buffer library v0.46 has been released, which among other features, adds support for 12-byte IVs for AES Counter mode (AES-CTR), since IPSec requires only 12 bytes from the user, which are appended 4 extra bytes, set to 1 always. There are no major changes made in the PMD, just documentation updates and new capability for new IV size supported. Changes in v2: - Fixed download link - Removed incorrect comment in documentation Pablo de Lara (2): crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 test/crypto: add 12-byte IV AES-CTR test cases doc/guides/cryptodevs/aesni_mb.rst | 19 ++- doc/guides/rel_notes/release_17_08.rst | 6 + drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 +- test/test/test_cryptodev_aes_test_vectors.h | 186 +++++++++++++++++++++++++ 4 files changed, 210 insertions(+), 5 deletions(-) -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara @ 2017-07-02 2:55 ` Pablo de Lara 2017-07-03 16:03 ` Declan Doherty 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara 2017-07-03 20:22 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 De Lara Guarch, Pablo 2 siblings, 1 reply; 11+ messages in thread From: Pablo de Lara @ 2017-07-02 2:55 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara IPSec Multi-buffer library v0.46 has been released, which includes, among othe features, support for 12-byte IV, for AES-CTR, keeping also the previous 16-byte IV, for backward compatibility reasons. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> --- doc/guides/cryptodevs/aesni_mb.rst | 19 ++++++++++++++++--- doc/guides/rel_notes/release_17_08.rst | 6 ++++++ drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 ++-- 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst index ecb52a1..7d9e977 100644 --- a/doc/guides/cryptodevs/aesni_mb.rst +++ b/doc/guides/cryptodevs/aesni_mb.rst @@ -76,8 +76,8 @@ Installation To build DPDK with the AESNI_MB_PMD the user is required to download the multi-buffer library from `here <https://github.com/01org/intel-ipsec-mb>`_ and compile it on their user system before building DPDK. -The latest version of the library supported by this PMD is v0.45, which -can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v0.45.zip>`_. +The latest version of the library supported by this PMD is v0.46, which +can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v0.46.zip>`_. .. code-block:: console @@ -95,7 +95,7 @@ and the Multi-Buffer library version supported by them: ============= ============================ 2.2 - 16.11 0.43 - 0.44 17.02 0.44 - 17.05 0.45 + 17.05 - 17.08 0.45 - 0.46 ============= ============================ @@ -131,3 +131,16 @@ Example: .. code-block:: console ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_aesni_mb,socket_id=1,max_nb_sessions=128" + +Extra notes +----------- + +For AES Counter mode (AES-CTR), the library supports two different sizes for Initialization +Vector (IV): + +* 12 bytes: used mainly for IPSec, as it requires 12 bytes from the user, which internally + are appended the counter block (4 bytes), which is set to 1 for the first block + (no padding required from the user) + +* 16 bytes: when passing 16 bytes, the library will take them and use the last 4 bytes + as the initial counter block for the first block. diff --git a/doc/guides/rel_notes/release_17_08.rst b/doc/guides/rel_notes/release_17_08.rst index 842f46f..3d9500a 100644 --- a/doc/guides/rel_notes/release_17_08.rst +++ b/doc/guides/rel_notes/release_17_08.rst @@ -75,6 +75,12 @@ New Features Added support for firmwares with multiple Ethernet ports per physical port. +* **Updated the AESNI MB PMD.** + + The AESNI MB PMD has been updated with additional support for: + + * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV. + Resolved Issues --------------- diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c index d1bc28e..82630be 100644 --- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c +++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c @@ -220,9 +220,9 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = { .increment = 8 }, .iv_size = { - .min = 16, + .min = 12, .max = 16, - .increment = 0 + .increment = 4 } }, } }, } -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara @ 2017-07-03 16:03 ` Declan Doherty 0 siblings, 0 replies; 11+ messages in thread From: Declan Doherty @ 2017-07-03 16:03 UTC (permalink / raw) To: Pablo de Lara; +Cc: dev On 02/07/17 03:55, Pablo de Lara wrote: > IPSec Multi-buffer library v0.46 has been released, > which includes, among othe features, support for 12-byte IV, > for AES-CTR, keeping also the previous 16-byte IV, > for backward compatibility reasons. > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> > --- ... > Acked-by: Declan Doherty <declan.doherty@intel.com> ^ permalink raw reply [flat|nested] 11+ messages in thread
* [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara @ 2017-07-02 2:55 ` Pablo de Lara 2017-07-03 16:03 ` Declan Doherty 2017-07-03 20:22 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 De Lara Guarch, Pablo 2 siblings, 1 reply; 11+ messages in thread From: Pablo de Lara @ 2017-07-02 2:55 UTC (permalink / raw) To: declan.doherty; +Cc: dev, Pablo de Lara AESNI MB PMD supports now 12-byte IVs, so some tests are added to check that, apart from the ones with 16-byte IVs, as this is still compatible. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> --- test/test/test_cryptodev_aes_test_vectors.h | 186 ++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) diff --git a/test/test/test_cryptodev_aes_test_vectors.h b/test/test/test_cryptodev_aes_test_vectors.h index 07d6eab..6ebc1c5 100644 --- a/test/test/test_cryptodev_aes_test_vectors.h +++ b/test/test/test_cryptodev_aes_test_vectors.h @@ -56,6 +56,17 @@ static const uint8_t ciphertext64_aes128ctr[] = { 0x79, 0x21, 0x70, 0xA0, 0xF3, 0x00, 0x9C, 0xEE }; +static const uint8_t ciphertext64_aes128ctr_IV_12bytes[] = { + 0x28, 0x80, 0x28, 0xC7, 0x15, 0x99, 0xC5, 0xA8, + 0xDD, 0x53, 0xC2, 0x67, 0x1B, 0x86, 0xB8, 0x13, + 0xAB, 0x25, 0x39, 0x7A, 0xD2, 0x1F, 0x8B, 0x4B, + 0x94, 0x89, 0x2B, 0x65, 0xCF, 0x89, 0x1E, 0xDD, + 0xD4, 0x7C, 0xFD, 0x8D, 0x0E, 0xCD, 0x23, 0xA4, + 0xEB, 0x8C, 0x05, 0x58, 0x45, 0x4A, 0x63, 0x44, + 0x11, 0x42, 0x07, 0x17, 0xB4, 0xD2, 0xCC, 0x75, + 0xB7, 0x23, 0x99, 0xA9, 0xC5, 0x89, 0x7F, 0x66 +}; + static const uint8_t plaintext_aes_docsis_bpi_cfb[] = { 0x00, 0x01, 0x02, 0x88, 0xEE, 0x59, 0x7E }; @@ -98,6 +109,17 @@ static const uint8_t ciphertext64_aes192ctr[] = { 0x59, 0x5E, 0x9E, 0xA5, 0x7B, 0x2D, 0xD7, 0xF0 }; +static const uint8_t ciphertext64_aes192ctr_IV_12bytes[] = { + 0x67, 0x65, 0xa9, 0xee, 0xfd, 0x31, 0x62, 0xfc, + 0xad, 0xfd, 0xc7, 0x25, 0xb7, 0x25, 0x16, 0xbe, + 0x25, 0xce, 0xc0, 0x1d, 0xda, 0xa9, 0xd3, 0xda, + 0x1b, 0x7d, 0x68, 0x6a, 0x6f, 0x06, 0xea, 0x47, + 0xa0, 0xe0, 0x15, 0xf4, 0xbd, 0x1b, 0x70, 0x34, + 0xd4, 0x6d, 0x1c, 0x84, 0x17, 0x91, 0x46, 0x0c, + 0xe8, 0xbc, 0x7a, 0xfb, 0x9f, 0x2a, 0x8f, 0xb4, + 0xd4, 0xf3, 0x6e, 0x5b, 0x75, 0xa0, 0xce, 0x32 +}; + static const uint8_t plaintext_aes256ctr[] = { 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96, 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A, @@ -120,6 +142,17 @@ static const uint8_t ciphertext64_aes256ctr[] = { 0x13, 0xC2, 0xDD, 0x08, 0x45, 0x79, 0x41, 0xA6 }; +static const uint8_t ciphertext64_aes256ctr_IV_12bytes[] = { + 0x7B, 0x7A, 0x7D, 0x83, 0x85, 0xF8, 0x81, 0xF3, + 0x32, 0x33, 0xD9, 0xFB, 0x04, 0x73, 0xD4, 0x2F, + 0x70, 0xDE, 0x90, 0x3E, 0xD0, 0xA9, 0x93, 0x8A, + 0x91, 0xF3, 0xB5, 0x29, 0x4D, 0x2A, 0x74, 0xD0, + 0xDC, 0x4E, 0x5C, 0x9B, 0x97, 0x24, 0xD8, 0x02, + 0xFE, 0xAB, 0x38, 0xE8, 0x73, 0x51, 0x29, 0x7E, + 0xF1, 0xF9, 0x40, 0x78, 0xB1, 0x04, 0x7A, 0x78, + 0x61, 0x07, 0x47, 0xE6, 0x8C, 0x0F, 0xA8, 0x76 +}; + static const uint8_t plaintext_aes_common[] = { "What a lousy earth! He wondered how many people " "were destitute that same night even in his own " @@ -352,6 +385,141 @@ static const struct blockcipher_test_data aes_test_data_3 = { } }; +/* AES128-CTR-SHA1 test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_1_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, + 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C + }, + .len = 16 + }, + .iv = { + .data = { + 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, 0xFB + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes128ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes128ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .auth_key = { + .data = { + 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA, + 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD, + 0xDE, 0xF4, 0xDE, 0xAD + }, + .len = 20 + }, + .digest = { + .data = { + 0x5C, 0x34, 0x6B, 0xE4, 0x9A, 0x7F, 0x4A, 0xC3, + 0x82, 0xBE, 0xA0, 0x12, 0xD1, 0xF0, 0x15, 0xFA, + 0xCF, 0xC8, 0x7F, 0x60 + }, + .len = 20, + .truncated_len = 12 + } +}; + +/** AES-192-CTR XCBC test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_2_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0xCB, 0xC5, 0xED, 0x5B, 0xE7, 0x7C, 0xBD, 0x8C, + 0x50, 0xD9, 0x30, 0xF2, 0xB5, 0x6A, 0x0E, 0x5F, + 0xAA, 0xAE, 0xAD, 0xA2, 0x1F, 0x49, 0x52, 0xD4 + }, + .len = 24 + }, + .iv = { + .data = { + 0x3F, 0x69, 0xA8, 0xCD, 0xE8, 0xF0, 0xEF, 0x40, + 0xB8, 0x7A, 0x4B, 0xED + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes192ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes192ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC, + .auth_key = { + .data = { + 0x87, 0x61, 0x54, 0x53, 0xC4, 0x6D, 0xDD, 0x51, + 0xE1, 0x9F, 0x86, 0x64, 0x39, 0x0A, 0xE6, 0x59 + }, + .len = 16 + }, + .digest = { + .data = { + 0x0C, 0xA1, 0xA5, 0xAF, 0x3E, 0x41, 0xD2, 0xF4, + 0x4C, 0x4C, 0xAB, 0x13 + }, + .len = 12, + .truncated_len = 12 + } +}; + +/** AES-256-CTR SHA1 test vector (12-byte IV) */ +static const struct blockcipher_test_data aes_test_data_3_IV_12_bytes = { + .crypto_algo = RTE_CRYPTO_CIPHER_AES_CTR, + .cipher_key = { + .data = { + 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE, + 0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81, + 0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7, + 0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4 + }, + .len = 32 + }, + .iv = { + .data = { + 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, 0xFB + }, + .len = 12 + }, + .plaintext = { + .data = plaintext_aes256ctr, + .len = 64 + }, + .ciphertext = { + .data = ciphertext64_aes256ctr_IV_12bytes, + .len = 64 + }, + .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .auth_key = { + .data = { + 0xF8, 0x2A, 0xC7, 0x54, 0xDB, 0x96, 0x18, 0xAA, + 0xC3, 0xA1, 0x53, 0xF6, 0x1F, 0x17, 0x60, 0xBD, + 0xDE, 0xF4, 0xDE, 0xAD + }, + .len = 20 + }, + .digest = { + .data = { + 0x57, 0x9A, 0x52, 0x6E, 0x31, 0x17, 0x57, 0x49, + 0xE7, 0xA1, 0x88, 0x6C, 0x2E, 0x36, 0x67, 0x63, + 0x3F, 0x2D, 0xA3, 0xEF + }, + .len = 20, + .truncated_len = 12 + } +}; /** AES-128-CBC SHA1 test vector */ static const struct blockcipher_test_data aes_test_data_4 = { .crypto_algo = RTE_CRYPTO_CIPHER_AES_CBC, @@ -1447,6 +1615,24 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = { BLOCKCIPHER_TEST_TARGET_PMD_MB | BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER }, + { + .test_descr = "AES-128-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_1_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + }, + { + .test_descr = "AES-192-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_2_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + }, + { + .test_descr = "AES-256-CTR Encryption (12-byte IV)", + .test_data = &aes_test_data_3_IV_12_bytes, + .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT, + .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB + } }; static const struct blockcipher_test_case aes_docsis_test_cases[] = { -- 2.9.4 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara @ 2017-07-03 16:03 ` Declan Doherty 0 siblings, 0 replies; 11+ messages in thread From: Declan Doherty @ 2017-07-03 16:03 UTC (permalink / raw) To: Pablo de Lara; +Cc: dev On 02/07/17 03:55, Pablo de Lara wrote: > AESNI MB PMD supports now 12-byte IVs, so some tests > are added to check that, apart from the ones with 16-byte IVs, > as this is still compatible. > > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> > --- ... > Acked-by: Declan Doherty <declan.doherty@intel.com> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara @ 2017-07-03 20:22 ` De Lara Guarch, Pablo 2 siblings, 0 replies; 11+ messages in thread From: De Lara Guarch, Pablo @ 2017-07-03 20:22 UTC (permalink / raw) To: Doherty, Declan; +Cc: dev > -----Original Message----- > From: De Lara Guarch, Pablo > Sent: Sunday, July 2, 2017 3:55 AM > To: Doherty, Declan <declan.doherty@intel.com> > Cc: dev@dpdk.org; De Lara Guarch, Pablo > <pablo.de.lara.guarch@intel.com> > Subject: [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 > > Intel IPSec Multi-buffer library v0.46 has been released, which among other > features, adds support for 12-byte IVs for AES Counter mode (AES-CTR), > since IPSec requires only > 12 bytes from the user, which are appended 4 extra bytes, set to 1 always. > > There are no major changes made in the PMD, just documentation updates > and new capability for new IV size supported. > > Changes in v2: > > - Fixed download link > - Removed incorrect comment in documentation > > Pablo de Lara (2): > crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 > test/crypto: add 12-byte IV AES-CTR test cases > > doc/guides/cryptodevs/aesni_mb.rst | 19 ++- > doc/guides/rel_notes/release_17_08.rst | 6 + > drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 4 +- > test/test/test_cryptodev_aes_test_vectors.h | 186 > +++++++++++++++++++++++++ > 4 files changed, 210 insertions(+), 5 deletions(-) > > -- > 2.9.4 Applied to dpdk-next-crypto. Pablo ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-07-03 20:22 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-06-28 11:48 [dpdk-dev] [PATCH 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-06-28 11:48 ` [dpdk-dev] [PATCH 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara 2017-06-30 13:52 ` Sergio Gonzalez Monroy 2017-07-02 10:46 ` De Lara Guarch, Pablo 2017-06-28 11:48 ` [dpdk-dev] [PATCH 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 Pablo de Lara 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 1/2] crypto/aesni_mb: support IPSec Multi-buffer lib v0.46 Pablo de Lara 2017-07-03 16:03 ` Declan Doherty 2017-07-02 2:55 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: add 12-byte IV AES-CTR test cases Pablo de Lara 2017-07-03 16:03 ` Declan Doherty 2017-07-03 20:22 ` [dpdk-dev] [PATCH v2 0/2] AES-NI MB PMD: support Multi-buffer library 0.46 De Lara Guarch, Pablo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).