Hi Konstantin:
For your comments, please see my answer inline.
Thanks.
Trevor Tao
At 2023-10-09 17:03:11, "Konstantin Ananyev" <konstantin.v.ananyev@yandex.ru> wrote:
>02.10.2023 09:53, Trevor Tao §á§Ú§ê§Ö§ä:
>> Now the port Rx offload mode is set to RTE_ETH_RX_OFFLOAD_CHECKSUM
>> by default, but some hw and/or virtual interface does not support
>> the offload mode presupposed, e.g., some virtio interfaces in
>> the cloud may only partly support RTE_ETH_RX_OFFLOAD_UDP_CKSUM/
>> RTE_ETH_RX_OFFLOAD_TCP_CKSUM,
>> but not RTE_ETH_RX_OFFLOAD_IPV4_CKSUM, and the error msg here:
>>
>> Ethdev port_id=0 requested Rx offloads 0xe does not match Rx offloads
>> capabilities 0x201d in rte_eth_dev_configure()
>>
>> So to enable the l3fwd running in that environment, the Rx mode requirement
>> can be relaxed to reflect the hardware feature reality here, and the l3fwd
>> can run smoothly then.
>> A warning msg would be provided to user in case it happens here.
>>
>> On the other side, enabling the software cksum check in case missing the
>> hw support.
>>
>> The relax action for rx cksum offload is just enabled when relax_rx_mode is
>> true which is false by default.
>>
>> Signed-off-by: Trevor Tao <taozj888@163.com>
>> ---
>> examples/l3fwd/l3fwd.h | 12 ++++++++++--
>> examples/l3fwd/l3fwd_em.h | 2 +-
>> examples/l3fwd/l3fwd_lpm.h | 2 +-
>> examples/l3fwd/main.c | 14 ++++++++++++++
>> 4 files changed, 26 insertions(+), 4 deletions(-)
>>
>> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
>> index b55855c932..fd98ad3373 100644
>> --- a/examples/l3fwd/l3fwd.h
>> +++ b/examples/l3fwd/l3fwd.h
>> @@ -159,7 +159,7 @@ send_single_packet(struct lcore_conf *qconf,
>>
>> #ifdef DO_RFC_1812_CHECKS
>> static inline int
>> -is_valid_ipv4_pkt(struct rte_ipv4_hdr *pkt, uint32_t link_len)
>> +is_valid_ipv4_pkt(struct rte_ipv4_hdr *pkt, uint32_t link_len, uint64_t ol_flags)
>> {
>> /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
>> /*
>> @@ -170,7 +170,15 @@ is_valid_ipv4_pkt(struct rte_ipv4_hdr *pkt, uint32_t link_len)
>> return -1;
>>
>> /* 2. The IP checksum must be correct. */
>> - /* this is checked in H/W */
>> + /* if this is not checked in H/W, check it. */
>> + if ((ol_flags & RTE_ETH_RX_OFFLOAD_IPV4_CKSUM) == 0) {
>> + uint16_t actual_cksum, expected_cksum;
>> + actual_cksum = pkt->hdr_checksum;
>> + pkt->hdr_checksum = 0;
>> + expected_cksum = rte_ipv4_cksum(pkt);
>> + if (actual_cksum != expected_cksum)
>> + return -2;
>> + }
>>
>> /*
>> * 3. The IP version number must be 4. If the version number is not 4
>> diff --git a/examples/l3fwd/l3fwd_em.h b/examples/l3fwd/l3fwd_em.h
>> index 7d051fc076..1fee2e2e6c 100644
>> --- a/examples/l3fwd/l3fwd_em.h
>> +++ b/examples/l3fwd/l3fwd_em.h
>> @@ -20,7 +20,7 @@ l3fwd_em_handle_ipv4(struct rte_mbuf *m, uint16_t portid,
>>
>> #ifdef DO_RFC_1812_CHECKS
>> /* Check to make sure the packet is valid (RFC1812) */
>> - if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
>> + if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len, m->ol_flags) < 0) {
>> rte_pktmbuf_free(m);
>> return BAD_PORT;
>> }
>> diff --git a/examples/l3fwd/l3fwd_lpm.h b/examples/l3fwd/l3fwd_lpm.h
>> index c61b969584..5ddae7da0f 100644
>> --- a/examples/l3fwd/l3fwd_lpm.h
>> +++ b/examples/l3fwd/l3fwd_lpm.h
>> @@ -22,7 +22,7 @@ l3fwd_lpm_simple_forward(struct rte_mbuf *m, uint16_t portid,
>>
>> #ifdef DO_RFC_1812_CHECKS
>> /* Check to make sure the packet is valid (RFC1812) */
>> - if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
>> + if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0, m->ol_flags) {
>
>Typo, pls fix.
>OK, I will fix it. Thanks.
>
>> rte_pktmbuf_free(m);
>> return;
>> }
>> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
>> index 2c8f528d00..a48ae7f62b 100644
>> --- a/examples/l3fwd/main.c
>> +++ b/examples/l3fwd/main.c
>> @@ -1284,6 +1284,20 @@ l3fwd_poll_resource_setup(void)
>> local_port_conf.rx_adv_conf.rss_conf.rss_hf);
>> }
>>
>> + /* relax the rx offload requirement */
>> + if ((local_port_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
>> + local_port_conf.rxmode.offloads) {
>
>
>Ok, but we relax only IP cksum.
>Though l3fwd tries to enable IP/TCP/UDP cksum.
>What if TCP/UDP is not supported, should we allow it or fail?
>I think the l3fwd just check the packet at the IP layer, and the TCP/UDP should not bother us here, so I think it can be allowed to relax them if they are not supported.
What do think about it?
Thanks.
>
>
>> + printf("Port %u requested Rx offloads 0x%"PRIx64" does not"
>> + " match Rx offloads capabilities 0x%"PRIx64"\n",
>> + portid, local_port_conf.rxmode.offloads,
>> + dev_info.rx_offload_capa);
>> + if (relax_rx_mode) {
>> + local_port_conf.rxmode.offloads &= dev_info.rx_offload_capa;
>> + printf("warning: modified the rx offload to 0x%"PRIx64" based on device"
>> + " capability\n", local_port_conf.rxmode.offloads);
>> + }
>> + }
>> +
>> ret = rte_eth_dev_configure(portid, nb_rx_queue,
>> (uint16_t)n_tx_queue, &local_port_conf);
>> if (ret < 0)
>
>if you going to submit new version, pls don't forget to bump the version
>number of the patch.
>OK, I will check it.
Thanks.