* [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts
@ 2018-06-25 15:59 Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 1/9] usertools: add DPDK config lib python library Anatoly Burakov
` (19 more replies)
0 siblings, 20 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
This patchset attempts to create a library out of Python scripts that
come with DPDK, with a goal of enabling external tools to get the same
information about the system DPDK has, and perhaps configure DPDK.
Potential applications include:
* Better setup.sh script (it's long overdue, and you know it!)
* Easier development of better tools for developers (see hugepage-info
example)
* Easier gathering of DPDK-centric system information, has potential
applications in troubleshooting tools
* Reduce code duplication for external tools seeking to use the same
functionality (bind-unbind, cpu layout, etc)
* Add cross-platform support for our scripts (see cpu-layout example
now working on FreeBSD)
There are a few things to mention. First of all, it's an RFC, so the
fact that it's unfinished and maybe awkward comes with the territory.
I am also aware of the fact that it's a Python library, that it's
outside the scope of DPDK and that it's somewhat a Not-Invented-Here
kind of proposition where there are a lot of externally available
(and arguably much better designed and implemented) tools that do the
same thing.
So the first question i would like to ask is, is the community at all
interested in something like this? Does it have to be part of DPDK
repository? Can it be maintained in a separate repository? How do we
handle updates and dependencies?
I should also mention that it is *not* intended to be a replacement
for udev or any other method of device binding - if anything, it's
the opposite, in that it takes the whole issue out of the question
and thus would make switching to udev or any other device binding
easier since both internal and external tools can utilize the same
Python API.
Anatoly Burakov (9):
usertools: add DPDK config lib python library
usertools/lib: add platform info library
usertools/cpu_layout: rewrite to use DPDKConfigLib
usertools/lib: support FreeBSD for platform info
usertools/lib: add device information library
usertools/devbind: switch to using DPDKConfigLib
usertools/lib: add hugepage information library
usertools: add hugepage info script
usertools/lib: add GRUB utility library for hugepage config
usertools/DPDKConfigLib/DevInfo.py | 414 +++++++++++++++++++
usertools/DPDKConfigLib/DevUtil.py | 242 +++++++++++
usertools/DPDKConfigLib/GrubHugeUtil.py | 175 ++++++++
usertools/DPDKConfigLib/HugeUtil.py | 309 ++++++++++++++
usertools/DPDKConfigLib/PlatformInfo.py | 205 ++++++++++
usertools/DPDKConfigLib/Util.py | 84 ++++
usertools/DPDKConfigLib/__init__.py | 0
usertools/cpu_layout.py | 53 +--
usertools/dpdk-devbind.py | 518 ++++--------------------
usertools/hugepage-info.py | 32 ++
10 files changed, 1544 insertions(+), 488 deletions(-)
create mode 100755 usertools/DPDKConfigLib/DevInfo.py
create mode 100755 usertools/DPDKConfigLib/DevUtil.py
create mode 100755 usertools/DPDKConfigLib/GrubHugeUtil.py
create mode 100755 usertools/DPDKConfigLib/HugeUtil.py
create mode 100755 usertools/DPDKConfigLib/PlatformInfo.py
create mode 100755 usertools/DPDKConfigLib/Util.py
create mode 100644 usertools/DPDKConfigLib/__init__.py
create mode 100755 usertools/hugepage-info.py
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 1/9] usertools: add DPDK config lib python library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 2/9] usertools/lib: add platform info library Anatoly Burakov
` (18 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: file,
'/home/anatoly/patches/dpdk_config_lib/rfc_v1/0001-usertools-add-DPDK-config-lib-python-library.patch',
doesn't, appear, to, be, a, patch.Add, -f, options?,
john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
This is a placeholder for Python library abstracting away many of
mundane details DPDK configuration scripts have to deal with. We
need __init__.py file to make the subdirectory a package so that
Python scripts in usertools/ can find their dependencies.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/__init__.py | 0
1 file changed, 0 insertions(+), 0 deletions(-)
create mode 100644 usertools/DPDKConfigLib/__init__.py
diff --git a/usertools/DPDKConfigLib/__init__.py b/usertools/DPDKConfigLib/__init__.py
new file mode 100644
index 000000000..e69de29bb
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 2/9] usertools/lib: add platform info library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 1/9] usertools: add DPDK config lib python library Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
` (17 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Add a library that will parse system information:
* NUMA nodes
* Cores and threads
* Mapping from NUMA node and core to thread id's
* Hyperthreading support status
* RAM size
* Default hugepage size as reported by kernel
This can be used by scripts.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/PlatformInfo.py | 130 ++++++++++++++++++++++++
usertools/DPDKConfigLib/Util.py | 16 +++
2 files changed, 146 insertions(+)
create mode 100755 usertools/DPDKConfigLib/PlatformInfo.py
create mode 100755 usertools/DPDKConfigLib/Util.py
diff --git a/usertools/DPDKConfigLib/PlatformInfo.py b/usertools/DPDKConfigLib/PlatformInfo.py
new file mode 100755
index 000000000..734d22026
--- /dev/null
+++ b/usertools/DPDKConfigLib/PlatformInfo.py
@@ -0,0 +1,130 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .Util import *
+import re
+import glob
+
+__SYSFS_CPU_INFO_PATH = "/sys/devices/system/cpu"
+__SYSFS_IOMMU_CLASS_PATH = "/sys/class/iommu"
+__KERNEL_HPSZ_PATH = "/sys/kernel/mm/hugepages/hugepages-*"
+
+try:
+ xrange # python 2
+except NameError:
+ xrange = range # python 3
+
+
+__CPU_FLAGS_TO_HP_SIZE = {
+ # x86 supports 2M and 1G pages
+ "pse": 2048,
+ "pdpe1gb": 1048576
+}
+__IOMMU_CPU_FLAGS = ["vmx", "vms"]
+
+__HT_CPU_FLAGS = ["ht"]
+
+
+def _parse_cpuinfo(pinfo):
+ core_info_list = []
+ with open("/proc/cpuinfo") as f:
+ cur_core = {}
+ for line in f:
+ line = line.strip()
+ # if we've reached end of current core info, store it and clear it
+ if line == "":
+ core_info_list.append(cur_core)
+ cur_core = {}
+ continue
+ key, value = kv_split(line, ":")
+ cur_core[key] = value
+ # parse flags - they're the same for all CPU's so only parse the first one
+ flags = set(core_info_list[0]["flags"].split())
+ for flag in flags:
+ if flag in __CPU_FLAGS_TO_HP_SIZE:
+ pinfo.hugepage_sizes_supported.append(__CPU_FLAGS_TO_HP_SIZE[flag])
+ elif flag in __IOMMU_CPU_FLAGS:
+ pinfo.iommu_supported = True
+ elif flag in __HT_CPU_FLAGS:
+ pinfo.hyperthreading_supported = True
+
+ # parse cores and sockets
+ numa_nodes = set()
+ core_map = {}
+ for core_dict in core_info_list:
+ thread_id = int(core_dict["processor"])
+ core_id = int(core_dict["core id"])
+ numa_node = int(core_dict["physical id"])
+
+ core_map.setdefault((numa_node, core_id), []).append(thread_id)
+ numa_nodes.add(numa_node)
+
+ # now, populate PlatformInfo with our, well, info - convert to lists
+ pinfo.numa_nodes = list(numa_nodes)
+ pinfo.core_map = core_map
+
+
+def _parse_meminfo(pinfo):
+ meminfo_data = {}
+ with open("/proc/meminfo") as f:
+ for line in f:
+ key, value = kv_split(line, ":")
+ meminfo_data[key] = value
+
+ # regex used to capture kilobytes
+ r = re.compile("(\d+) kB")
+
+ # total ram size
+ m = r.match(meminfo_data["MemTotal"])
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ pinfo.ram_size = int(m.group(1))
+
+ # hugepages may not be supported
+ if "Hugepagesize" in meminfo_data:
+ m = r.match(meminfo_data["Hugepagesize"])
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ pinfo.default_hugepage_size = int(m.group(1))
+
+
+def _find_enabled_hugepage_sizes():
+ paths = glob.glob(__KERNEL_HPSZ_PATH)
+ r = re.compile("hugepages-(\d+)kB")
+ sizes = []
+ for p in paths:
+ p = os.path.basename(p)
+ m = r.search(p)
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ sizes.append(int(m.group(1)))
+ return sizes
+
+
+def _iommu_is_enabled():
+ pass
+
+
+class PlatformInfo:
+ def __init__(self):
+ self.update()
+
+ def reset(self):
+ self.numa_nodes = []
+ self.hyperthreading_supported = False
+ self.core_map = {} # numa_node, core_id: [thread_id]
+ self.iommu_supported = False
+ self.iommu_mode = ""
+ self.bootloader_iommu_mode = ""
+ self.hugepage_sizes_supported = []
+ self.hugepage_sizes_enabled = []
+ self.default_hugepage_size = 0
+ self.ram_size = 0
+
+ def update(self):
+ self.reset()
+ _parse_cpuinfo(self)
+ _parse_meminfo(self)
+ self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
new file mode 100755
index 000000000..42434e728
--- /dev/null
+++ b/usertools/DPDKConfigLib/Util.py
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+# split line into key-value pair, cleaning up the values in the process
+def kv_split(line, separator):
+ # just in case
+ line = line.strip()
+
+ tokens = line.split(separator, 1)
+ key, value = None, None
+ if len(tokens) > 0:
+ key = tokens[0].strip()
+ if len(tokens) > 1:
+ value = tokens[1].strip()
+ return key, value
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 1/9] usertools: add DPDK config lib python library Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 2/9] usertools/lib: add platform info library Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
` (16 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Rewrite cpu layout script to use data provided by DPDKConfigLib
script. This demonstrates an example of how external tools can get
the same information from DPDKConfigLib.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/cpu_layout.py | 53 ++++++++++-------------------------------
1 file changed, 13 insertions(+), 40 deletions(-)
diff --git a/usertools/cpu_layout.py b/usertools/cpu_layout.py
index 6f129b1db..af950361c 100755
--- a/usertools/cpu_layout.py
+++ b/usertools/cpu_layout.py
@@ -1,73 +1,46 @@
#!/usr/bin/env python
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2018 Intel Corporation
# Copyright(c) 2017 Cavium, Inc. All rights reserved.
from __future__ import print_function
-import sys
-try:
- xrange # Python 2
-except NameError:
- xrange = range # Python 3
+from DPDKConfigLib import PlatformInfo
-sockets = []
-cores = []
-core_map = {}
+info = PlatformInfo.PlatformInfo()
base_path = "/sys/devices/system/cpu"
-fd = open("{}/kernel_max".format(base_path))
-max_cpus = int(fd.read())
-fd.close()
-for cpu in xrange(max_cpus + 1):
- try:
- fd = open("{}/cpu{}/topology/core_id".format(base_path, cpu))
- except IOError:
- continue
- except:
- break
- core = int(fd.read())
- fd.close()
- fd = open("{}/cpu{}/topology/physical_package_id".format(base_path, cpu))
- socket = int(fd.read())
- fd.close()
- if core not in cores:
- cores.append(core)
- if socket not in sockets:
- sockets.append(socket)
- key = (socket, core)
- if key not in core_map:
- core_map[key] = []
- core_map[key].append(cpu)
+
+cores = sorted(set([core for _, core in info.core_map]))
print(format("=" * (47 + len(base_path))))
print("Core and Socket Information (as reported by '{}')".format(base_path))
print("{}\n".format("=" * (47 + len(base_path))))
print("cores = ", cores)
-print("sockets = ", sockets)
+print("sockets = ", info.numa_nodes)
print("")
-max_processor_len = len(str(len(cores) * len(sockets) * 2 - 1))
-max_thread_count = len(list(core_map.values())[0])
+max_processor_len = len(str(len(cores) * len(info.numa_nodes) * 2 - 1))
+max_thread_count = len(info.core_map.values()[0])
max_core_map_len = (max_processor_len * max_thread_count) \
+ len(", ") * (max_thread_count - 1) \
+ len('[]') + len('Socket ')
max_core_id_len = len(str(max(cores)))
output = " ".ljust(max_core_id_len + len('Core '))
-for s in sockets:
+for s in info.numa_nodes:
output += " Socket %s" % str(s).ljust(max_core_map_len - len('Socket '))
print(output)
output = " ".ljust(max_core_id_len + len('Core '))
-for s in sockets:
+for s in info.numa_nodes:
output += " --------".ljust(max_core_map_len)
output += " "
print(output)
for c in cores:
output = "Core %s" % str(c).ljust(max_core_id_len)
- for s in sockets:
- if (s,c) in core_map:
- output += " " + str(core_map[(s, c)]).ljust(max_core_map_len)
+ for s in info.numa_nodes:
+ if (s, c) in info.core_map:
+ output += " " + str(info.core_map[(s, c)]).ljust(max_core_map_len)
else:
output += " " * (max_core_map_len + 1)
print(output)
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 4/9] usertools/lib: support FreeBSD for platform info
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (2 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 5/9] usertools/lib: add device information library Anatoly Burakov
` (15 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
This enables FreeBSD support for PlatformInfo part of the
DPDKConfigLib script, thereby enabling FreeBSD support for the
cpu_layout script.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/PlatformInfo.py | 81 ++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 3 deletions(-)
diff --git a/usertools/DPDKConfigLib/PlatformInfo.py b/usertools/DPDKConfigLib/PlatformInfo.py
index 734d22026..4ca507a37 100755
--- a/usertools/DPDKConfigLib/PlatformInfo.py
+++ b/usertools/DPDKConfigLib/PlatformInfo.py
@@ -6,6 +6,15 @@
from .Util import *
import re
import glob
+import platform
+import subprocess
+import string
+import xml.etree.ElementTree # for FreeBSD topology parsing
+try:
+ import queue # python 3
+except ImportError:
+ import Queue as queue # python 2
+
__SYSFS_CPU_INFO_PATH = "/sys/devices/system/cpu"
__SYSFS_IOMMU_CLASS_PATH = "/sys/class/iommu"
@@ -26,6 +35,9 @@
__HT_CPU_FLAGS = ["ht"]
+__SYSCTL_TOPOLOGY_CMDLINE = ['sysctl', '-b', 'kern.sched.topology_spec']
+__SYSCTL_MEM_CMDLINE = ['sysctl', 'hw.realmem']
+
def _parse_cpuinfo(pinfo):
core_info_list = []
@@ -107,6 +119,56 @@ def _iommu_is_enabled():
pass
+def _parse_sysctl_cpu_topology(pinfo):
+ output = subprocess.check_output(__SYSCTL_TOPOLOGY_CMDLINE)
+
+ # output from sysctl contains null terminator, remove it
+ raw_xml = output[:-1]
+ tree = xml.etree.ElementTree.fromstring(raw_xml)
+ groups = queue.Queue()
+
+ # put first group onto the queue
+ for e in tree.findall('group'):
+ groups.put(e)
+
+ # per-level list of cores
+ levels = {}
+
+ while not groups.empty():
+ group = groups.get()
+ level = int(group.get('level'))
+ cpus = [int(cpu) for cpu in group.find('cpu').text.split(",")]
+ cur_value = levels.setdefault(level, [])
+
+ # store discovered cpu's
+ cur_value.append(cpus)
+ levels[level] = cur_value
+
+ children = group.find('children')
+ if children is not None:
+ for c in children.findall('group'):
+ groups.put(c)
+
+ # find deepest level
+ max_level = max(levels.keys())
+
+ # for each group in the deepest level, take first CPU and make it physical
+ # core id
+ for cpus in levels[max_level]:
+ pinfo.core_map[pinfo.numa_nodes[0], cpus[0]] = cpus
+
+ # also make note of hyperthreading
+ if len(cpus) > 1:
+ pinfo.hyperthreading_supported = True
+
+
+def _parse_sysctl_ram_size():
+ output = subprocess.check_output(__SYSCTL_MEM_CMDLINE)
+ _, mem_str = kv_split(output, ':')
+ mem_amount = int(mem_str) / 1024 # kilobytes
+ return mem_amount
+
+
class PlatformInfo:
def __init__(self):
self.update()
@@ -125,6 +187,19 @@ def reset(self):
def update(self):
self.reset()
- _parse_cpuinfo(self)
- _parse_meminfo(self)
- self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
+ system = platform.system()
+ if system == 'Linux':
+ _parse_cpuinfo(self)
+ _parse_meminfo(self)
+ self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
+ elif system == 'FreeBSD':
+ # DPDK doesn't support NUMA on FreeBSD
+ self.numa_nodes = [0]
+ # find number of threads
+ _parse_sysctl_cpu_topology(self)
+ # find RAM size
+ self.ram_size = _parse_sysctl_ram_size()
+ # DPDK doesn't use hugepages on FreeBSD
+ self.hugepage_sizes_supported = []
+ self.hugepage_sizes_enabled = []
+ self.default_hugepage_size = 0
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 5/9] usertools/lib: add device information library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (3 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
` (14 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
This library is mostly copy-paste of devbind script, but with few
additional bells and whistles, such as the ability to enumerate and
create/destroy VF devices.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/DevInfo.py | 414 +++++++++++++++++++++++++++++
usertools/DPDKConfigLib/DevUtil.py | 242 +++++++++++++++++
usertools/DPDKConfigLib/Util.py | 19 ++
3 files changed, 675 insertions(+)
create mode 100755 usertools/DPDKConfigLib/DevInfo.py
create mode 100755 usertools/DPDKConfigLib/DevUtil.py
diff --git a/usertools/DPDKConfigLib/DevInfo.py b/usertools/DPDKConfigLib/DevInfo.py
new file mode 100755
index 000000000..8297b3544
--- /dev/null
+++ b/usertools/DPDKConfigLib/DevInfo.py
@@ -0,0 +1,414 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2018 Intel Corporation
+# Copyright(c) 2017 Cavium, Inc. All rights reserved.
+
+import glob
+from .Util import *
+
+__DEFAULT_DPDK_DRIVERS = ["igb_uio", "vfio-pci", "uio_pci_generic"]
+__dpdk_drivers = None # list of detected dpdk drivers
+__devices = None # map from PCI address to device objects
+
+# The PCI base class for all devices
+__network_class = {'Class': '02', 'Vendor': None, 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__encryption_class = {'Class': '10', 'Vendor': None, 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__intel_processor_class = {'Class': '0b', 'Vendor': '8086', 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__cavium_sso = {'Class': '08', 'Vendor': '177d', 'Device': 'a04b,a04d',
+ 'SVendor': None, 'SDevice': None}
+__cavium_fpa = {'Class': '08', 'Vendor': '177d', 'Device': 'a053',
+ 'SVendor': None, 'SDevice': None}
+__cavium_pkx = {'Class': '08', 'Vendor': '177d', 'Device': 'a0dd,a049',
+ 'SVendor': None, 'SDevice': None}
+
+# internal data, not supposed to be exposed, but available to local classes
+_network_devices = [__network_class, __cavium_pkx]
+_crypto_devices = [__encryption_class, __intel_processor_class]
+_eventdev_devices = [__cavium_sso]
+_mempool_devices = [__cavium_fpa]
+
+__DRIVER_PATH_FMT = "/sys/bus/pci/drivers/%s/"
+__DEVICE_PATH_FMT = "/sys/bus/pci/devices/%s/"
+
+
+def _get_pci_speed_info(pci_addr):
+ data = subprocess.check_output(["lspci", "-vvs", pci_addr]).splitlines()
+
+ # scan until we find capability structure
+ raw_data = {}
+ cur_key = ""
+ r = re.compile(r"Express \(v\d\) Endpoint") # PCI-E cap
+ found_pci_express_cap = False
+ for line in data:
+ key, value = kv_split(line, ":")
+ if not found_pci_express_cap:
+ if key != "Capabilities":
+ continue
+ # this is a capability structure - check if it's a PCI-E cap
+ m = r.search(value)
+ if not m:
+ continue # not a PCI-E cap
+ found_pci_express_cap = True
+ continue # start scanning for info
+ elif key == "Capabilities":
+ break # we've reached end of our PCI-E cap structure
+ if value is not None:
+ # this is a new key
+ cur_key = key
+ else:
+ value = key # this is continuation of previous key
+ raw_data[cur_key] = " ".join([raw_data.get(cur_key, ""), value])
+
+ # now, get our data out of there
+ result = {
+ "speed_supported": 0,
+ "width_supported": 0,
+ "speed_active": 0,
+ "width_active": 0
+ }
+ speed_re = re.compile(r"Speed (\d+(\.\d+)?)GT/s")
+ width_re = re.compile(r"Width x(\d+)")
+
+ val = raw_data.get("LnkCap", "")
+ speed_m = speed_re.search(val)
+ width_m = width_re.search(val)
+ # return empty
+ if speed_m:
+ result["speed_supported"] = float(speed_m.group(1))
+ if width_m:
+ result["width_supported"] = int(width_m.group(1))
+
+ val = raw_data.get("LnkSta", "")
+ speed_m = speed_re.search(val)
+ width_m = width_re.search(val)
+ if speed_m:
+ result["speed_active"] = float(speed_m.group(1))
+ if width_m:
+ result["width_active"] = int(width_m.group(1))
+ return result
+
+
+def _device_type_match(dev_dict, devices_type):
+ for i in range(len(devices_type)):
+ param_count = len(
+ [x for x in devices_type[i].values() if x is not None])
+ match_count = 0
+ if dev_dict["Class"][0:2] == devices_type[i]["Class"]:
+ match_count = match_count + 1
+ for key in devices_type[i].keys():
+ if key != 'Class' and devices_type[i][key]:
+ value_list = devices_type[i][key].split(',')
+ for value in value_list:
+ if value.strip() == dev_dict[key]:
+ match_count = match_count + 1
+ # count must be the number of non None parameters to match
+ if match_count == param_count:
+ return True
+ return False
+
+
+def _get_numa_node(addr):
+ path = get_device_path(addr, "numa_node")
+ if not os.path.isfile(path):
+ return 0
+ val = int(read_file(path))
+ return val if val >= 0 else 0
+
+
+def _basename_from_symlink(path):
+ if not os.path.islink(path):
+ raise ValueError("Invalid link: %s" % path)
+ return os.path.basename(os.path.realpath(path))
+
+
+def _get_pf_addr(pci_addr):
+ return _basename_from_symlink(get_device_path(pci_addr, "physfn"))
+
+
+def _get_vf_addrs(pci_addr):
+ vf_path = get_device_path(pci_addr, "virtfn*")
+ return [_basename_from_symlink(path) for path in glob.glob(vf_path)]
+
+
+def _get_total_vfs(pci_addr):
+ path = get_device_path(pci_addr, "sriov_totalvfs")
+ if not os.path.isfile(path):
+ return 0
+ return int(read_file(path))
+
+
+# not allowed to use Enum because it's Python3.4+, so...
+class DeviceType:
+ '''Device type identifier'''
+ DEVTYPE_UNKNOWN = -1
+ DEVTYPE_NETWORK = 0
+ DEVTYPE_CRYPTO = 1
+ DEVTYPE_EVENT = 2
+ DEVTYPE_MEMPOOL = 3
+
+
+class DevInfo(object):
+ # map from lspci output to DevInfo attributes
+ __attr_map = {
+ 'Class': 'class_id',
+ 'Vendor': 'vendor_id',
+ 'Device': 'device_id',
+ 'SVendor': 'subsystem_vendor_id',
+ 'SDevice': 'subsystem_device_id',
+ 'Class_str': 'class_name',
+ 'Vendor_str': 'vendor_name',
+ 'Device_str': 'device_name',
+ 'SVendor_str': 'subsystem_vendor_name',
+ 'SDevice_str': 'subsystem_device_name',
+ 'Driver': 'active_driver'
+ }
+
+ def __init__(self, pci_addr):
+ self.pci_addr = pci_addr # Slot
+
+ # initialize all attributes
+ self.reset()
+
+ # we know our PCI address at this point, so read lspci
+ self.update()
+
+ def reset(self):
+ self.devtype = DeviceType.DEVTYPE_UNKNOWN # start with unknown type
+ self.class_id = "" # Class
+ self.vendor_id = "" # Vendor
+ self.device_id = "" # Device
+ self.subsystem_vendor_id = "" # SVendor
+ self.subsystem_device_id = "" # SDevice
+ self.class_name = "" # Class_str
+ self.vendor_name = "" # Vendor_str
+ self.device_name = "" # Device_str
+ self.subsystem_vendor_name = "" # SVendor_str
+ self.subsystem_device_name = "" # SDevice_str
+ self.kernel_drivers = [] # list of drivers in Module
+ self.active_driver = "" # Driver
+ self.available_drivers = []
+ self.numa_node = -1
+ self.is_virtual_function = False
+ self.virtual_functions = [] # list of VF pci addresses
+ self.physical_function = "" # PF PCI address if this is a VF
+ self.numvfs = 0
+ self.totalvfs = 0
+ self.pci_width_supported = 0
+ self.pci_width_active = 0
+ self.pci_speed_supported = 0
+ self.pci_speed_active = 0
+
+ def update(self):
+ # clear everything
+ self.reset()
+
+ lspci_info = subprocess.check_output(["lspci", "-vmmnnks",
+ self.pci_addr]).splitlines()
+ lspci_dict = {}
+ r = re.compile(r"\[[\da-f]{4}\]$")
+
+ # parse lspci details
+ for line in lspci_info:
+ if len(line) == 0:
+ continue
+ name, value = line.decode().split("\t", 1)
+ name = name.strip(":")
+ has_id = r.search(value) is not None
+ if has_id:
+ namestr = name + "_str"
+ strvalue = value[:-7] # cut off hex value for _str value
+ value = value[-5:-1] # store hex value
+ lspci_dict[namestr] = strvalue
+ lspci_dict[name] = value
+
+ # update object using map of lspci values to object attributes
+ for key, value in lspci_dict.items():
+ if key in self.__attr_map:
+ setattr(self, self.__attr_map[key], value)
+
+ # match device type
+ if _device_type_match(lspci_dict, _network_devices):
+ self.devtype = DeviceType.DEVTYPE_NETWORK
+ elif _device_type_match(lspci_dict, _crypto_devices):
+ self.devtype = DeviceType.DEVTYPE_CRYPTO
+ elif _device_type_match(lspci_dict, _eventdev_devices):
+ self.devtype = DeviceType.DEVTYPE_EVENT
+ elif _device_type_match(lspci_dict, _mempool_devices):
+ self.devtype = DeviceType.DEVTYPE_MEMPOOL
+
+ # special case - Module may have several drivers
+ if 'Module' in lspci_dict:
+ module_str = lspci_dict['Module'].split(',')
+ self.kernel_drivers = [d.strip() for d in module_str]
+
+ # read NUMA node
+ self.numa_node = _get_numa_node(self.pci_addr)
+
+ # check if device is a PF or a VF
+ try:
+ pf_addr = _get_pf_addr(self.pci_addr)
+ self.is_virtual_function = True
+ self.physical_function = pf_addr
+ except ValueError:
+ self.virtual_functions = _get_vf_addrs(self.pci_addr)
+ self.numvfs = len(self.virtual_functions)
+ self.totalvfs = _get_total_vfs(self.pci_addr)
+
+ if not self.is_virtual_function:
+ speed_info = _get_pci_speed_info(self.pci_addr)
+ else:
+ speed_info = _get_pci_speed_info(self.physical_function)
+
+ self.pci_width_active = speed_info["width_active"]
+ self.pci_width_supported = speed_info["width_supported"]
+ self.pci_speed_active = speed_info["speed_active"]
+ self.pci_speed_supported = speed_info["speed_supported"]
+
+ # update available drivers
+ all_drivers = self.kernel_drivers + get_loaded_dpdk_drivers()
+ self.available_drivers = [driver for driver in all_drivers
+ if driver != self.active_driver]
+
+
+# extends PCI device info with a few things unique to network devices
+class NetworkDevInfo(DevInfo):
+ def __init__(self, pci_addr):
+ super(NetworkDevInfo, self).__init__(pci_addr)
+
+ def reset(self):
+ super(NetworkDevInfo, self).reset()
+ self.interfaces = []
+ self.ssh_interface = ""
+ self.active_interface = False
+
+ def update(self):
+ # do regular update from lspci first
+ super(NetworkDevInfo, self).update()
+
+ # now, update network-device-specific stuff
+ dirs = glob.glob(get_device_path(self.pci_addr, "net/*"))
+ self.interfaces = [os.path.basename(d) for d in dirs]
+
+ # check what is the interface if any for an ssh connection if
+ # any to this host, so we can mark it.
+ route = subprocess.check_output(["ip", "-o", "route"])
+ # filter out all lines for 169.254 routes
+ route = "\n".join(filter(lambda ln: not ln.startswith("169.254"),
+ route.decode().splitlines()))
+ rt_info = route.split()
+ for i in range(len(rt_info) - 1):
+ if rt_info[i] == "dev":
+ iface = rt_info[i + 1]
+ if iface in self.interfaces:
+ self.ssh_interface = iface
+ self.active_interface = True
+ break
+
+
+def __update_device_list():
+ global __devices
+
+ __devices = {}
+
+ non_network_devices = _crypto_devices + _mempool_devices +\
+ _eventdev_devices
+
+ # first loop through and read details for all devices
+ # request machine readable format, with numeric IDs and String
+ dev_dict = {}
+ lspci_lines = subprocess.check_output(["lspci", "-Dvmmnk"]).splitlines()
+ for line in lspci_lines:
+ if line.strip() == "":
+ # we've completed reading this device, so parse it
+ pci_addr = dev_dict['Slot']
+ if _device_type_match(dev_dict, _network_devices):
+ d = NetworkDevInfo(pci_addr)
+ __devices[pci_addr] = d
+ elif _device_type_match(dev_dict, non_network_devices):
+ d = DevInfo(pci_addr)
+ __devices[pci_addr] = d
+ else:
+ # unsupported device, ignore
+ pass
+ dev_dict = {} # clear the dictionary for next
+ continue
+ name, value = line.decode().split("\t", 1)
+ name = name.rstrip(":")
+ # Numeric IDs
+ dev_dict[name] = value
+
+
+def __update_dpdk_driver_list():
+ global __dpdk_drivers
+
+ __dpdk_drivers = __DEFAULT_DPDK_DRIVERS[:] # make a copy
+
+ # list of supported modules
+ mods = [{"Name": driver, "Found": False} for driver in __dpdk_drivers]
+
+ # first check if module is loaded
+ try:
+ # Get list of sysfs modules (both built-in and dynamically loaded)
+ sysfs_path = '/sys/module/'
+
+ # Get the list of directories in sysfs_path
+ sysfs_mods = [os.path.join(sysfs_path, o) for o
+ in os.listdir(sysfs_path)
+ if os.path.isdir(os.path.join(sysfs_path, o))]
+
+ # Extract the last element of '/sys/module/abc' in the array
+ sysfs_mods = [a.split('/')[-1] for a in sysfs_mods]
+
+ # special case for vfio_pci (module is named vfio-pci,
+ # but its .ko is named vfio_pci)
+ sysfs_mods = [a if a != 'vfio_pci' else 'vfio-pci' for a in sysfs_mods]
+
+ for mod in mods:
+ if mod["Name"] in sysfs_mods:
+ mod["Found"] = True
+ except:
+ pass
+
+ # change DPDK driver list to only contain drivers that are loaded
+ __dpdk_drivers = [mod["Name"] for mod in mods if mod["Found"]]
+
+
+# get a file/directory inside sysfs dir for a given PCI address
+def get_device_path(pci_addr, fname):
+ return os.path.join(__DEVICE_PATH_FMT % pci_addr, fname)
+
+
+# get a file/directory inside sysfs dir for a given driver
+def get_driver_path(driver, fname):
+ return os.path.join(__DRIVER_PATH_FMT % driver, fname)
+
+
+def get_loaded_dpdk_drivers(force_refresh=False):
+ '''Get list of loaded DPDK drivers'''
+ global __dpdk_drivers
+
+ if __dpdk_drivers is not None and not force_refresh:
+ return __dpdk_drivers
+
+ __update_dpdk_driver_list()
+
+ return __dpdk_drivers
+
+
+def get_supported_dpdk_drivers():
+ return __DEFAULT_DPDK_DRIVERS
+
+
+def get_devices(force_refresh=False):
+ '''Get list of detected devices'''
+ global __devices
+
+ if __devices is not None and not force_refresh:
+ return __devices
+
+ __update_device_list()
+
+ return __devices
diff --git a/usertools/DPDKConfigLib/DevUtil.py b/usertools/DPDKConfigLib/DevUtil.py
new file mode 100755
index 000000000..17ee657f7
--- /dev/null
+++ b/usertools/DPDKConfigLib/DevUtil.py
@@ -0,0 +1,242 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2018 Intel Corporation
+# Copyright(c) 2017 Cavium, Inc. All rights reserved.
+
+from .DevInfo import *
+import errno
+
+
+# check if we have support for driver_override by looking at sysfs and checking
+# if any of the PCI device directories have driver_override file inside them
+__have_override = len(glob.glob("/sys/bus/pci/devices/*/driver_override")) != 0
+
+
+# wrap custom exceptions, so that we can handle errors we expect, but still pass
+# through any unexpected errors to the caller (which might indicate a bug)
+class BindException(Exception):
+ def __init__(self, *args, **kwargs):
+ Exception.__init__(self, *args, **kwargs)
+
+
+class UnbindException(Exception):
+ def __init__(self, *args, **kwargs):
+ Exception.__init__(self, *args, **kwargs)
+
+
+# change num vfs for a given device
+def __write_numvfs(dev, num_vfs):
+ path = get_device_path(dev.pci_addr, "sriov_numvfs")
+ append_file(path, num_vfs)
+ dev.update()
+
+
+# unbind device from its driver
+def __unbind_device(dev):
+ '''Unbind the device identified by "addr" from its current driver'''
+ addr = dev.pci_addr
+
+ # For kernels >= 3.15 driver_override is used to bind a device to a driver.
+ # Before unbinding it, overwrite driver_override with empty string so that
+ # the device can be bound to any other driver.
+ if __have_override:
+ override_fname = get_device_path(dev.pci_addr, "driver_override")
+ try:
+ write_file(override_fname, "\00")
+ except IOError as e:
+ raise UnbindException("Couldn't overwrite 'driver_override' "
+ "for PCI device '%s': %s" %
+ (addr, e.strerror))
+
+ filename = get_driver_path(dev.active_driver, "unbind")
+ try:
+ append_file(filename, addr)
+ except IOError:
+ raise UnbindException("Couldn't unbind PCI device '%s'" % addr)
+ dev.update()
+
+
+# bind device to a specified driver
+def __bind_device_to_driver(dev, driver):
+ '''Bind the device given by "dev_id" to the driver "driver". If the device
+ is already bound to a different driver, it will be unbound first'''
+ addr = dev.pci_addr
+
+ # For kernels >= 3.15 driver_override can be used to specify the driver
+ # for a device rather than relying on the driver to provide a positive
+ # match of the device. The existing process of looking up
+ # the vendor and device ID, adding them to the driver new_id,
+ # will erroneously bind other devices too which has the additional burden
+ # of unbinding those devices
+ if driver in get_loaded_dpdk_drivers():
+ if __have_override:
+ override_fname = get_device_path(dev.pci_addr, "driver_override")
+ try:
+ write_file(override_fname, driver)
+ except IOError as e:
+ raise BindException("Couldn't write 'driver_override' for "
+ "PCI device '%s': %s" % (addr, e.strerror))
+ # For kernels < 3.15 use new_id to add PCI id's to the driver
+ else:
+ newid_fname = get_driver_path(driver, "new_id")
+ try:
+ # Convert Device and Vendor Id to int to write to new_id
+ write_file(newid_fname, "%04x %04x" % (int(dev.vendor_id, 16),
+ int(dev.device_id, 16)))
+ except IOError as e:
+ # for some reason, closing new_id after adding a new PCI
+ # ID to new_id results in IOError (with errno set to
+ # ENODEV). however, if the device was successfully bound, we
+ # don't care for any errors and can safely ignore the
+ # error.
+ if e.errno != errno.ENODEV:
+ raise BindException("Couldn't write 'new_id' for PCI "
+ "device '%s': %s" % (addr, e.strerror))
+
+ print(get_driver_path(driver, "bind"))
+ bind_fname = get_driver_path(driver, "bind")
+ try:
+ append_file(bind_fname, addr)
+ except IOError as e:
+ dev.update()
+ print(driver)
+ print(dev.active_driver)
+ raise BindException("Couldn't bind PCI device '%s' to driver '%s': %s" %
+ (addr, driver, e.strerror))
+ dev.update()
+
+
+def set_num_vfs(dev, num_vfs):
+ if not isinstance(dev, DevInfo):
+ dev = get_devices()[dev]
+ if dev.is_virtual_function:
+ raise ValueError("Device '%s' is a virtual function" % dev.pci_addr)
+ if num_vfs > dev.totalvfs:
+ raise ValueError("Device '%s' has '%i' virtual functions,"
+ "'%i' requested" % (dev.pci_addr, dev.totalvfs,
+ num_vfs))
+ if dev.num_vfs == num_vfs:
+ return
+ __write_numvfs(dev, num_vfs)
+ dev.update()
+
+
+def unbind(addrs, force_unbind=False):
+ '''Unbind device(s) from all drivers'''
+ # build a list if we were not provided a list
+ pci_dev_list = []
+ try:
+ pci_dev_list.extend(addrs)
+ except AttributeError:
+ pci_dev_list.append(addrs)
+
+ # ensure we are only working with DevInfo objects
+ filter_func = (lambda d: d.active_interface != "" and
+ (d.devtype != DeviceType.DEVTYPE_NETWORK or
+ not d.active_interface or not force_unbind))
+ pci_dev_list = filter(filter_func, [a if isinstance(a, DevInfo)
+ else get_devices()[get_device_name(a)]
+ for a in pci_dev_list])
+ for d in pci_dev_list:
+ __unbind_device(d)
+
+
+# we are intentionally not providing a "simple" function to bind a single
+# device due to complexities involved with using kernels < 3.15. instead, we're
+# allowing to call this function with either one PCI address or a list of PCI
+# addresses, or one DevInfo object, or a list of DevInfo objects, and will
+# automatically do cleanup even if we fail to bind some devices
+def bind(addrs, driver, force_unbind=False):
+ '''Bind device(s) to a specified driver'''
+ # build a list if we were not provided a list
+ pci_dev_list = []
+ try:
+ pci_dev_list.extend(addrs)
+ except AttributeError:
+ pci_dev_list.append(addrs)
+
+ # we want devices that aren't already bound to the driver we want, and are
+ # either not network devices, or aren't active network interfaces, unless we
+ # are in force-unbind mode
+ filter_func = (lambda d: d.active_driver != driver and
+ (d.devtype != DeviceType.DEVTYPE_NETWORK or
+ not d.active_interface or not force_unbind))
+ # ensure we are working with DevInfo instances, and filter them out
+ pci_dev_list = list(filter(filter_func,
+ [a if isinstance(a, DevInfo)
+ else get_devices()[get_device_name(a)]
+ for a in pci_dev_list]))
+ if len(pci_dev_list) == 0:
+ # nothing to be done, bail out
+ return
+ ex = None
+ try:
+ for dev in pci_dev_list:
+ old_driver = dev.active_driver
+ if dev.active_driver != "":
+ __unbind_device(dev)
+ __bind_device_to_driver(dev, driver)
+ except UnbindException as e:
+ # no need to roll back anything, but still stop
+ ex = e
+ except BindException as e:
+ # roll back changes, stop and raise later
+ dev.update()
+ if old_driver != dev.active_driver:
+ try:
+ __bind_device_to_driver(dev, old_driver)
+ except BindException:
+ # ignore this one, nothing we can do about it
+ pass
+ ex = e
+ finally:
+ # we need to do this regardless of whether we succeeded or failed
+
+ # For kernels < 3.15 when binding devices to a generic driver
+ # (i.e. one that doesn't have a PCI ID table) using new_id, some devices
+ # that are not bound to any other driver could be bound even if no one
+ # has asked them to. hence, we check the list of drivers again, and see
+ # if some of the previously-unbound devices were erroneously bound.
+ if not __have_override:
+ for dev in get_devices():
+ # skip devices that were already (or supposed to be) bound
+ if dev in pci_dev_list or dev.active_driver != "":
+ continue
+
+ # update information about this device
+ dev.update()
+
+ # check if updated information indicates the device was bound
+ if dev.active_driver != "":
+ try:
+ __unbind_device(dev)
+ except UnbindException as e:
+ # if we already had an exception previously, don't throw
+ # this one, because we have a higher-priority one that
+ # we haven't thrown yet
+ if ex is not None:
+ break
+ raise e
+ # if we've failed somewhere during the bind process, raise that
+ if ex is not None:
+ raise ex
+
+
+def get_device_name(name):
+ '''Take a device "name" - a string passed in by user to identify a NIC
+ device, and determine the device id - i.e. the domain:bus:slot.func - for
+ it, which can then be used to index into the devices array'''
+
+ # check if it's already a suitable index
+ if name in get_devices():
+ return name
+ # check if it's an index just missing the domain part
+ elif "0000:" + name in get_devices():
+ return "0000:" + name
+ else:
+ # check if it's an interface name, e.g. eth1
+ filter_func = (lambda i: i.devtype == DeviceType.DEVTYPE_NETWORK)
+ for dev in filter(filter_func, get_devices().values()):
+ if name in dev.interfaces:
+ return dev.pci_addr
+ return None
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
index 42434e728..eb21cce15 100755
--- a/usertools/DPDKConfigLib/Util.py
+++ b/usertools/DPDKConfigLib/Util.py
@@ -2,6 +2,25 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+# read entire file and return the result
+def read_file(path):
+ with open(path, 'r') as f:
+ result = f.read().strip()
+ return result
+
+
+# write value to file
+def write_file(path, value):
+ with open(path, 'w') as f:
+ f.write(value)
+
+
+# append value to file
+def append_file(path, value):
+ with open(path, 'a') as f:
+ f.write(value)
+
+
# split line into key-value pair, cleaning up the values in the process
def kv_split(line, separator):
# just in case
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 6/9] usertools/devbind: switch to using DPDKConfigLib
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (4 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 5/9] usertools/lib: add device information library Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 7/9] usertools/lib: add hugepage information library Anatoly Burakov
` (13 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Make devbind use DPDKConfigLib library instead of having its own
logic for binding/unbinding/enumerating devices and getting
device information.
All semantics and output are kept the same, only the internals
changed.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/dpdk-devbind.py | 518 ++++++--------------------------------
1 file changed, 70 insertions(+), 448 deletions(-)
diff --git a/usertools/dpdk-devbind.py b/usertools/dpdk-devbind.py
index d0c420906..7baddb622 100755
--- a/usertools/dpdk-devbind.py
+++ b/usertools/dpdk-devbind.py
@@ -1,47 +1,18 @@
#! /usr/bin/env python
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2018 Intel Corporation
#
+from DPDKConfigLib import DevInfo, DevUtil
import sys
-import os
import getopt
-import subprocess
-from os.path import exists, abspath, dirname, basename
-
-# The PCI base class for all devices
-network_class = {'Class': '02', 'Vendor': None, 'Device': None,
- 'SVendor': None, 'SDevice': None}
-encryption_class = {'Class': '10', 'Vendor': None, 'Device': None,
- 'SVendor': None, 'SDevice': None}
-intel_processor_class = {'Class': '0b', 'Vendor': '8086', 'Device': None,
- 'SVendor': None, 'SDevice': None}
-cavium_sso = {'Class': '08', 'Vendor': '177d', 'Device': 'a04b,a04d',
- 'SVendor': None, 'SDevice': None}
-cavium_fpa = {'Class': '08', 'Vendor': '177d', 'Device': 'a053',
- 'SVendor': None, 'SDevice': None}
-cavium_pkx = {'Class': '08', 'Vendor': '177d', 'Device': 'a0dd,a049',
- 'SVendor': None, 'SDevice': None}
-cavium_tim = {'Class': '08', 'Vendor': '177d', 'Device': 'a051',
- 'SVendor': None, 'SDevice': None}
-avp_vnic = {'Class': '05', 'Vendor': '1af4', 'Device': '1110',
- 'SVendor': None, 'SDevice': None}
-
-network_devices = [network_class, cavium_pkx, avp_vnic]
-crypto_devices = [encryption_class, intel_processor_class]
-eventdev_devices = [cavium_sso, cavium_tim]
-mempool_devices = [cavium_fpa]
-
-# global dict ethernet devices present. Dictionary indexed by PCI address.
-# Each device within this is itself a dictionary of device properties
-devices = {}
-# list of supported DPDK drivers
-dpdk_drivers = ["igb_uio", "vfio-pci", "uio_pci_generic"]
+from os.path import basename
# command-line arg flags
b_flag = None
status_flag = False
force_flag = False
+status_dev = ""
args = []
@@ -116,394 +87,43 @@ def usage():
""" % locals()) # replace items from local variables
-# This is roughly compatible with check_output function in subprocess module
-# which is only available in python 2.7.
-def check_output(args, stderr=None):
- '''Run a command and capture its output'''
- return subprocess.Popen(args, stdout=subprocess.PIPE,
- stderr=stderr).communicate()[0]
-
-
def check_modules():
'''Checks that igb_uio is loaded'''
- global dpdk_drivers
+ loaded_drivers = DevUtil.get_loaded_dpdk_drivers()
+ supported_drivers = DevUtil.get_supported_dpdk_drivers()
- # list of supported modules
- mods = [{"Name": driver, "Found": False} for driver in dpdk_drivers]
-
- # first check if module is loaded
- try:
- # Get list of sysfs modules (both built-in and dynamically loaded)
- sysfs_path = '/sys/module/'
-
- # Get the list of directories in sysfs_path
- sysfs_mods = [os.path.join(sysfs_path, o) for o
- in os.listdir(sysfs_path)
- if os.path.isdir(os.path.join(sysfs_path, o))]
-
- # Extract the last element of '/sys/module/abc' in the array
- sysfs_mods = [a.split('/')[-1] for a in sysfs_mods]
-
- # special case for vfio_pci (module is named vfio-pci,
- # but its .ko is named vfio_pci)
- sysfs_mods = [a if a != 'vfio_pci' else 'vfio-pci' for a in sysfs_mods]
-
- for mod in mods:
- if mod["Name"] in sysfs_mods:
- mod["Found"] = True
- except:
- pass
+ if b_flag in supported_drivers and b_flag not in loaded_drivers:
+ print("Error - %s driver is not loaded" % b_flag)
+ sys.exit(1)
# check if we have at least one loaded module
- if True not in [mod["Found"] for mod in mods] and b_flag is not None:
- if b_flag in dpdk_drivers:
- print("Error - no supported modules(DPDK driver) are loaded")
- sys.exit(1)
- else:
- print("Warning - no supported modules(DPDK driver) are loaded")
-
- # change DPDK driver list to only contain drivers that are loaded
- dpdk_drivers = [mod["Name"] for mod in mods if mod["Found"]]
-
-
-def has_driver(dev_id):
- '''return true if a device is assigned to a driver. False otherwise'''
- return "Driver_str" in devices[dev_id]
-
-
-def get_pci_device_details(dev_id, probe_lspci):
- '''This function gets additional details for a PCI device'''
- device = {}
-
- if probe_lspci:
- extra_info = check_output(["lspci", "-vmmks", dev_id]).splitlines()
-
- # parse lspci details
- for line in extra_info:
- if len(line) == 0:
- continue
- name, value = line.decode().split("\t", 1)
- name = name.strip(":") + "_str"
- device[name] = value
- # check for a unix interface name
- device["Interface"] = ""
- for base, dirs, _ in os.walk("/sys/bus/pci/devices/%s/" % dev_id):
- if "net" in dirs:
- device["Interface"] = \
- ",".join(os.listdir(os.path.join(base, "net")))
- break
- # check if a port is used for ssh connection
- device["Ssh_if"] = False
- device["Active"] = ""
-
- return device
-
-def clear_data():
- '''This function clears any old data'''
- devices = {}
-
-def get_device_details(devices_type):
- '''This function populates the "devices" dictionary. The keys used are
- the pci addresses (domain:bus:slot.func). The values are themselves
- dictionaries - one for each NIC.'''
- global devices
- global dpdk_drivers
-
- # first loop through and read details for all devices
- # request machine readable format, with numeric IDs and String
- dev = {}
- dev_lines = check_output(["lspci", "-Dvmmnnk"]).splitlines()
- for dev_line in dev_lines:
- if len(dev_line) == 0:
- if device_type_match(dev, devices_type):
- # Replace "Driver" with "Driver_str" to have consistency of
- # of dictionary key names
- if "Driver" in dev.keys():
- dev["Driver_str"] = dev.pop("Driver")
- if "Module" in dev.keys():
- dev["Module_str"] = dev.pop("Module")
- # use dict to make copy of dev
- devices[dev["Slot"]] = dict(dev)
- # Clear previous device's data
- dev = {}
- else:
- name, value = dev_line.decode().split("\t", 1)
- value_list = value.rsplit(' ', 1)
- if len(value_list) > 1:
- # String stored in <name>_str
- dev[name.rstrip(":") + '_str'] = value_list[0]
- # Numeric IDs
- dev[name.rstrip(":")] = value_list[len(value_list) - 1] \
- .rstrip("]").lstrip("[")
-
- if devices_type == network_devices:
- # check what is the interface if any for an ssh connection if
- # any to this host, so we can mark it later.
- ssh_if = []
- route = check_output(["ip", "-o", "route"])
- # filter out all lines for 169.254 routes
- route = "\n".join(filter(lambda ln: not ln.startswith("169.254"),
- route.decode().splitlines()))
- rt_info = route.split()
- for i in range(len(rt_info) - 1):
- if rt_info[i] == "dev":
- ssh_if.append(rt_info[i+1])
-
- # based on the basic info, get extended text details
- for d in devices.keys():
- if not device_type_match(devices[d], devices_type):
- continue
-
- # get additional info and add it to existing data
- devices[d] = devices[d].copy()
- # No need to probe lspci
- devices[d].update(get_pci_device_details(d, False).items())
-
- if devices_type == network_devices:
- for _if in ssh_if:
- if _if in devices[d]["Interface"].split(","):
- devices[d]["Ssh_if"] = True
- devices[d]["Active"] = "*Active*"
- break
-
- # add igb_uio to list of supporting modules if needed
- if "Module_str" in devices[d]:
- for driver in dpdk_drivers:
- if driver not in devices[d]["Module_str"]:
- devices[d]["Module_str"] = \
- devices[d]["Module_str"] + ",%s" % driver
- else:
- devices[d]["Module_str"] = ",".join(dpdk_drivers)
-
- # make sure the driver and module strings do not have any duplicates
- if has_driver(d):
- modules = devices[d]["Module_str"].split(",")
- if devices[d]["Driver_str"] in modules:
- modules.remove(devices[d]["Driver_str"])
- devices[d]["Module_str"] = ",".join(modules)
-
-
-def device_type_match(dev, devices_type):
- for i in range(len(devices_type)):
- param_count = len(
- [x for x in devices_type[i].values() if x is not None])
- match_count = 0
- if dev["Class"][0:2] == devices_type[i]["Class"]:
- match_count = match_count + 1
- for key in devices_type[i].keys():
- if key != 'Class' and devices_type[i][key]:
- value_list = devices_type[i][key].split(',')
- for value in value_list:
- if value.strip(' ') == dev[key]:
- match_count = match_count + 1
- # count must be the number of non None parameters to match
- if match_count == param_count:
- return True
- return False
-
-def dev_id_from_dev_name(dev_name):
- '''Take a device "name" - a string passed in by user to identify a NIC
- device, and determine the device id - i.e. the domain:bus:slot.func - for
- it, which can then be used to index into the devices array'''
-
- # check if it's already a suitable index
- if dev_name in devices:
- return dev_name
- # check if it's an index just missing the domain part
- elif "0000:" + dev_name in devices:
- return "0000:" + dev_name
- else:
- # check if it's an interface name, e.g. eth1
- for d in devices.keys():
- if dev_name in devices[d]["Interface"].split(","):
- return devices[d]["Slot"]
- # if nothing else matches - error
- print("Unknown device: %s. "
- "Please specify device in \"bus:slot.func\" format" % dev_name)
- sys.exit(1)
-
-
-def unbind_one(dev_id, force):
- '''Unbind the device identified by "dev_id" from its current driver'''
- dev = devices[dev_id]
- if not has_driver(dev_id):
- print("%s %s %s is not currently managed by any driver\n" %
- (dev["Slot"], dev["Device_str"], dev["Interface"]))
- return
-
- # prevent us disconnecting ourselves
- if dev["Ssh_if"] and not force:
- print("Routing table indicates that interface %s is active. "
- "Skipping unbind" % (dev_id))
- return
-
- # write to /sys to unbind
- filename = "/sys/bus/pci/drivers/%s/unbind" % dev["Driver_str"]
- try:
- f = open(filename, "a")
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
- f.write(dev_id)
- f.close()
-
-
-def bind_one(dev_id, driver, force):
- '''Bind the device given by "dev_id" to the driver "driver". If the device
- is already bound to a different driver, it will be unbound first'''
- dev = devices[dev_id]
- saved_driver = None # used to rollback any unbind in case of failure
-
- # prevent disconnection of our ssh session
- if dev["Ssh_if"] and not force:
- print("Routing table indicates that interface %s is active. "
- "Not modifying" % (dev_id))
- return
-
- # unbind any existing drivers we don't want
- if has_driver(dev_id):
- if dev["Driver_str"] == driver:
- print("%s already bound to driver %s, skipping\n"
- % (dev_id, driver))
- return
- else:
- saved_driver = dev["Driver_str"]
- unbind_one(dev_id, force)
- dev["Driver_str"] = "" # clear driver string
-
- # For kernels >= 3.15 driver_override can be used to specify the driver
- # for a device rather than relying on the driver to provide a positive
- # match of the device. The existing process of looking up
- # the vendor and device ID, adding them to the driver new_id,
- # will erroneously bind other devices too which has the additional burden
- # of unbinding those devices
- if driver in dpdk_drivers:
- filename = "/sys/bus/pci/devices/%s/driver_override" % dev_id
- if os.path.exists(filename):
- try:
- f = open(filename, "w")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- return
- try:
- f.write("%s" % driver)
- f.close()
- except:
- print("Error: bind failed for %s - Cannot write driver %s to "
- "PCI ID " % (dev_id, driver))
- return
- # For kernels < 3.15 use new_id to add PCI id's to the driver
- else:
- filename = "/sys/bus/pci/drivers/%s/new_id" % driver
- try:
- f = open(filename, "w")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- return
- try:
- # Convert Device and Vendor Id to int to write to new_id
- f.write("%04x %04x" % (int(dev["Vendor"],16),
- int(dev["Device"], 16)))
- f.close()
- except:
- print("Error: bind failed for %s - Cannot write new PCI ID to "
- "driver %s" % (dev_id, driver))
- return
-
- # do the bind by writing to /sys
- filename = "/sys/bus/pci/drivers/%s/bind" % driver
- try:
- f = open(filename, "a")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- if saved_driver is not None: # restore any previous driver
- bind_one(dev_id, saved_driver, force)
- return
- try:
- f.write(dev_id)
- f.close()
- except:
- # for some reason, closing dev_id after adding a new PCI ID to new_id
- # results in IOError. however, if the device was successfully bound,
- # we don't care for any errors and can safely ignore IOError
- tmp = get_pci_device_details(dev_id, True)
- if "Driver_str" in tmp and tmp["Driver_str"] == driver:
- return
- print("Error: bind failed for %s - Cannot bind to driver %s"
- % (dev_id, driver))
- if saved_driver is not None: # restore any previous driver
- bind_one(dev_id, saved_driver, force)
- return
-
- # For kernels > 3.15 driver_override is used to bind a device to a driver.
- # Before unbinding it, overwrite driver_override with empty string so that
- # the device can be bound to any other driver
- filename = "/sys/bus/pci/devices/%s/driver_override" % dev_id
- if os.path.exists(filename):
- try:
- f = open(filename, "w")
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
- try:
- f.write("\00")
- f.close()
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
+ if len(loaded_drivers) == 0:
+ print("Warning - no supported modules(DPDK driver) are loaded")
def unbind_all(dev_list, force=False):
"""Unbind method, takes a list of device locations"""
-
- if dev_list[0] == "dpdk":
- for d in devices.keys():
- if "Driver_str" in devices[d]:
- if devices[d]["Driver_str"] in dpdk_drivers:
- unbind_one(devices[d]["Slot"], force)
- return
-
- dev_list = map(dev_id_from_dev_name, dev_list)
- for d in dev_list:
- unbind_one(d, force)
+ try:
+ DevUtil.unbind(dev_list, force)
+ except DevUtil.UnbindException as e:
+ print("Unbind failed: %s" % e)
+ sys.exit(1)
def bind_all(dev_list, driver, force=False):
"""Bind method, takes a list of device locations"""
- global devices
- dev_list = map(dev_id_from_dev_name, dev_list)
+ try:
+ DevUtil.bind(dev_list, driver, force)
+ except DevUtil.BindException as e:
+ print("Bind failed: %s" % e)
+ sys.exit(1)
+ except DevUtil.UnbindException as e:
+ print("Bind failed: %s" % e)
+ sys.exit(1)
- for d in dev_list:
- bind_one(d, driver, force)
- # For kernels < 3.15 when binding devices to a generic driver
- # (i.e. one that doesn't have a PCI ID table) using new_id, some devices
- # that are not bound to any other driver could be bound even if no one has
- # asked them to. hence, we check the list of drivers again, and see if
- # some of the previously-unbound devices were erroneously bound.
- if not os.path.exists("/sys/bus/pci/devices/%s/driver_override" % d):
- for d in devices.keys():
- # skip devices that were already bound or that we know should be bound
- if "Driver_str" in devices[d] or d in dev_list:
- continue
-
- # update information about this device
- devices[d] = dict(devices[d].items() +
- get_pci_device_details(d, True).items())
-
- # check if updated information indicates that the device was bound
- if "Driver_str" in devices[d]:
- unbind_one(d, force)
-
-
-def display_devices(title, dev_list, extra_params=None):
+def display_devices(title, dev_list):
'''Displays to the user the details of a list of devices given in
"dev_list". The "extra_params" parameter, if given, should contain a string
with %()s fields in it for replacement by the named fields in each
@@ -515,59 +135,73 @@ def display_devices(title, dev_list, extra_params=None):
strings.append("<none>")
else:
for dev in dev_list:
- if extra_params is not None:
- strings.append("%s '%s %s' %s" % (dev["Slot"],
- dev["Device_str"],
- dev["Device"],
- extra_params % dev))
+ if dev.devtype == DevInfo.DeviceType.DEVTYPE_NETWORK:
+ extra_str = "if=%s drv=%s unused=%s%s" % \
+ (",".join(dev.interfaces), dev.active_driver,
+ ",".join(dev.available_drivers),
+ " *Active*" if dev.active_interface else "")
else:
- strings.append("%s '%s'" % (dev["Slot"], dev["Device_str"]))
+ extra_str = "drv=%s unused=%s" % \
+ (dev.active_driver, ",".join(dev.available_drivers))
+ strings.append("%s '%s %s' %s" % (dev.pci_addr,
+ dev.device_name,
+ dev.device_id,
+ extra_str))
# sort before printing, so that the entries appear in PCI order
strings.sort()
print("\n".join(strings)) # print one per line
-def show_device_status(devices_type, device_name):
- global dpdk_drivers
+
+def show_device_status(device_list, device_type):
kernel_drv = []
dpdk_drv = []
no_drv = []
+ typenames = {
+ DevInfo.DeviceType.DEVTYPE_NETWORK: "Network",
+ DevInfo.DeviceType.DEVTYPE_CRYPTO: "Crypto",
+ DevInfo.DeviceType.DEVTYPE_EVENT: "Event",
+ DevInfo.DeviceType.DEVTYPE_MEMPOOL: "Mempool"
+ }
+ typename = typenames[device_type]
+
# split our list of network devices into the three categories above
- for d in devices.keys():
- if device_type_match(devices[d], devices_type):
- if not has_driver(d):
- no_drv.append(devices[d])
- continue
- if devices[d]["Driver_str"] in dpdk_drivers:
- dpdk_drv.append(devices[d])
+ for d in device_list:
+ if d.devtype == device_type:
+ if d.active_driver == "":
+ no_drv.append(d)
+ elif d.active_driver in DevInfo.get_loaded_dpdk_drivers():
+ dpdk_drv.append(d)
else:
- kernel_drv.append(devices[d])
+ kernel_drv.append(d)
# print each category separately, so we can clearly see what's used by DPDK
- display_devices("%s devices using DPDK-compatible driver" % device_name,
- dpdk_drv, "drv=%(Driver_str)s unused=%(Module_str)s")
- display_devices("%s devices using kernel driver" % device_name, kernel_drv,
- "if=%(Interface)s drv=%(Driver_str)s "
- "unused=%(Module_str)s %(Active)s")
- display_devices("Other %s devices" % device_name, no_drv,
- "unused=%(Module_str)s")
+ display_devices("%s devices using DPDK-compatible driver" % typename,
+ dpdk_drv)
+ display_devices("%s devices using kernel driver" % typename, kernel_drv)
+ display_devices("Other %s devices" % typename, no_drv)
+
def show_status():
'''Function called when the script is passed the "--status" option.
Displays to the user what devices are bound to the igb_uio driver, the
kernel driver or to no driver'''
- if status_dev == "net" or status_dev == "all":
- show_device_status(network_devices, "Network")
+ devtypes = {
+ "net": DevInfo.DeviceType.DEVTYPE_NETWORK,
+ "crypto": DevInfo.DeviceType.DEVTYPE_CRYPTO,
+ "event": DevInfo.DeviceType.DEVTYPE_EVENT,
+ "mempool": DevInfo.DeviceType.DEVTYPE_MEMPOOL
+ }
+ device_list = DevInfo.get_devices().values()
- if status_dev == "crypto" or status_dev == "all":
- show_device_status(crypto_devices, "Crypto")
+ found_types = sorted([devtypes[t] for t in devtypes.keys()
+ if t == status_dev or status_dev == "all"])
- if status_dev == "event" or status_dev == "all":
- show_device_status(eventdev_devices, "Eventdev")
+ for t in found_types:
+ devices = list(filter(lambda dev: dev.devtype == t, device_list))
+ show_device_status(devices, t)
- if status_dev == "mempool" or status_dev == "all":
- show_device_status(mempool_devices, "Mempool")
def parse_args():
'''Parses the command-line arguments given by the user and takes the
@@ -635,13 +269,6 @@ def do_arg_actions():
elif b_flag is not None:
bind_all(args, b_flag, force_flag)
if status_flag:
- if b_flag is not None:
- clear_data()
- # refresh if we have changed anything
- get_device_details(network_devices)
- get_device_details(crypto_devices)
- get_device_details(eventdev_devices)
- get_device_details(mempool_devices)
show_status()
@@ -649,11 +276,6 @@ def main():
'''program main function'''
parse_args()
check_modules()
- clear_data()
- get_device_details(network_devices)
- get_device_details(crypto_devices)
- get_device_details(eventdev_devices)
- get_device_details(mempool_devices)
do_arg_actions()
if __name__ == "__main__":
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 7/9] usertools/lib: add hugepage information library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (5 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 8/9] usertools: add hugepage info script Anatoly Burakov
` (12 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Add a library for getting hugepage information on Linux system.
Supported functionality:
- List active hugetlbfs mountpoints
- Change hugetlbfs mountpoints
- Supports both transient and persistent (fstab) mountpoints
- Display/change number of allocated hugepages
- Supports both total and per-NUMA node page counts
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/HugeUtil.py | 309 ++++++++++++++++++++++++++++
usertools/DPDKConfigLib/Util.py | 49 +++++
2 files changed, 358 insertions(+)
create mode 100755 usertools/DPDKConfigLib/HugeUtil.py
diff --git a/usertools/DPDKConfigLib/HugeUtil.py b/usertools/DPDKConfigLib/HugeUtil.py
new file mode 100755
index 000000000..79ed97bb7
--- /dev/null
+++ b/usertools/DPDKConfigLib/HugeUtil.py
@@ -0,0 +1,309 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .PlatformInfo import *
+from .Util import *
+import re
+import os
+import subprocess
+
+__KERNEL_NUMA_HP_PATH = \
+ "/sys/devices/system/node/node%i/hugepages/hugepages-%ikB/"
+__KERNEL_HP_PATH = "/sys/kernel/mm/hugepages/hugepages-%ikB/"
+__NR_HP_FNAME = "nr_hugepages"
+# check if we have systemd
+_have_systemd = run(["which", "systemctl"])
+
+# local copy of platform info
+info = PlatformInfo()
+
+
+def _find_runtime_hugetlbfs_mountpoints():
+ mountpoints = {}
+ with open("/proc/mounts") as f:
+ for line in f:
+ if not _is_hugetlbfs_mount(line):
+ continue
+ line = line.strip()
+ _, path, _, options, _, _ = line.split()
+
+ m = re.search(r"pagesize=(\d+\w)", options)
+ if m:
+ pagesz = human_readable_to_kilobytes(m.group(1))
+ else:
+ # if no size specified, assume default hugepage size
+ pagesz = info.default_hugepage_size
+ if pagesz in mountpoints:
+ raise RuntimeError("Multiple mountpoints for same hugetlbfs")
+ mountpoints[pagesz] = path
+ return mountpoints
+
+
+def _find_nr_hugepages(page_sz, node=None):
+ if node is not None:
+ path = os.path.join(__KERNEL_NUMA_HP_PATH % (node, page_sz),
+ __NR_HP_FNAME)
+ else:
+ path = os.path.join(__KERNEL_HP_PATH % (page_sz), __NR_HP_FNAME)
+ return int(read_file(path))
+
+
+def _write_nr_hugepages(page_sz, nr_pages, node=None):
+ if node is not None:
+ path = os.path.join(__KERNEL_NUMA_HP_PATH % (node, page_sz),
+ __NR_HP_FNAME)
+ else:
+ path = os.path.join(__KERNEL_HP_PATH % (page_sz), __NR_HP_FNAME)
+ write_file(path, str(nr_pages))
+
+
+def _is_hugetlbfs_mount(line):
+ # ignore comemnts
+ if line.strip().startswith("#"):
+ return False
+ tokens = line.split()
+ if len(tokens) != 6:
+ return False
+ return tokens[2] == "hugetlbfs"
+
+
+def _update_fstab_hugetlbfs_mounts(mountpoints):
+ # remove all hugetlbfs mappings
+ with open("/etc/fstab") as f:
+ lines = f.readlines()
+ mount_idxs = [idx for idx, line in enumerate(lines)
+ if _is_hugetlbfs_mount(line)]
+
+ # delete all lines with hugetlbfs mountpoints
+ for idx in reversed(sorted(mount_idxs)):
+ del lines[idx]
+
+ # append new mountpoints
+ lines.extend(["hugetlbfs %s hugetlbfs pagesize=%s 0 0\n" %
+ (mountpoints[size], kilobytes_to_human_readable(size))
+ for size in mountpoints.keys() if mountpoints[size] != ""])
+
+ # finally, write everything back
+ with open("/etc/fstab", "w") as f:
+ f.writelines(lines)
+
+
+def _find_fstab_hugetlbfs_mounts():
+ mountpoints = {}
+ with open("/etc/fstab") as f:
+ for line in f:
+ if not _is_hugetlbfs_mount(line):
+ continue
+ line = line.strip()
+ _, path, _, options, _, _ = line.split()
+
+ m = re.search(r"pagesize=(\d+\w)", options)
+ if m:
+ pagesz = human_readable_to_kilobytes(m.group(1))
+ else:
+ # if no size specified, assume default hugepage size
+ pagesz = info.default_hugepage_size
+ if pagesz in mountpoints:
+ raise RuntimeError("Multiple mountpoints for same hugetlbfs")
+ mountpoints[pagesz] = path
+ return mountpoints
+
+
+def _find_systemd_hugetlbfs_mounts():
+ # we find systemd mounts by virtue of them not being in fstab, so check each
+ units = []
+ out = subprocess.check_output(["systemctl", "-t", "mount", "--all"],
+ stderr=None)
+ lines = out.decode("utf-8").splitlines()
+ for line in lines:
+ line = line.strip()
+
+ tokens = line.split()
+
+ if len(tokens) == 0:
+ continue
+
+ # masked unit files are second token
+ if tokens[0].endswith(".mount"):
+ unit = tokens[0]
+ elif tokens[1].endswith(".mount"):
+ tokens = tokens[1:]
+ unit = tokens[0]
+ else:
+ continue # not a unit line
+
+ # if this is inactive and masked, we don't care
+ load, active, sub = tokens[1:4]
+ if load == "masked" and active == "inactive":
+ continue
+
+ units.append({"unit": unit, "load": load, "active": active, "sub": sub})
+
+ for unit_dict in units:
+ # status may return non-zero, but we don't care
+ try:
+ out = subprocess.check_output(["systemctl", "status",
+ unit_dict["unit"]], stderr=None)
+ except subprocess.CalledProcessError as e:
+ out = e.output
+ lines = out.decode("utf-8").splitlines()
+ for line in lines:
+ line = line.strip()
+ if line.startswith("What"):
+ unit_dict["fs"] = line.split()[1]
+ elif line.startswith("Where"):
+ unit_dict["path"] = line.split()[1]
+
+ fstab_mountpoints = _find_fstab_hugetlbfs_mounts().values()
+ filter_func = (lambda x: x.get("fs", "") == "hugetlbfs" and
+ x.get("path", "") not in fstab_mountpoints)
+ return {u["unit"]: u["path"] for u in filter(filter_func, units)}
+
+
+def _disable_systemd_hugetlbfs_mounts():
+ mounts = _find_systemd_hugetlbfs_mounts()
+ for unit, path in mounts.keys():
+ run(["systemctl", "stop", unit]) # unmount
+ run(["systemctl", "mask", unit]) # prevent this from ever running
+
+
+class PersistentMountpointConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+ self.mountpoints = _find_fstab_hugetlbfs_mounts()
+ for sz in info.hugepage_sizes_enabled:
+ self.mountpoints.setdefault(sz, "")
+
+ def commit(self):
+ # check if we are trying to mount hugetlbfs of unsupported size
+ supported = set(info.hugepage_sizes_supported)
+ all_sizes = set(self.mountpoints.keys())
+ if not all_sizes.issubset(supported):
+ diff = supported.difference(all_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ if _have_systemd:
+ # dealing with fstab is easier, so disable all systemd mounts
+ _disable_systemd_hugetlbfs_mounts()
+
+ _update_fstab_hugetlbfs_mounts(self.mountpoints)
+
+ if _have_systemd:
+ run(["systemctl", "daemon-reload"])
+ self.update()
+
+ def reset(self):
+ self.mountpoints = {} # pagesz : path
+
+
+class RuntimeMountpointConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+ self.mountpoints = _find_runtime_hugetlbfs_mountpoints()
+ for sz in info.hugepage_sizes_enabled:
+ self.mountpoints.setdefault(sz, "")
+
+ def commit(self):
+ # check if we are trying to mount hugetlbfs of unsupported size
+ supported = set(info.hugepage_sizes_supported)
+ all_sizes = set(self.mountpoints.keys())
+ if not all_sizes.issubset(supported):
+ diff = supported.difference(all_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ cur_mp = _find_runtime_hugetlbfs_mountpoints()
+ sizes = set(cur_mp.keys()).union(self.mountpoints.keys())
+
+ for size in sizes:
+ old = cur_mp.get(size, "")
+ new = self.mountpoints.get(size, "")
+
+ is_unmount = old != "" and new == ""
+ is_mount = old == "" and new != ""
+ is_remount = old != "" and new != "" and old != new
+
+ mount_param = ["-t", "hugetlbfs", "-o",
+ "pagesize=%sM" % (size / 1024)]
+
+ if is_unmount:
+ run(["umount", old])
+ elif is_mount:
+ mkpath(new)
+ run(["mount"] + mount_param + [new])
+ elif is_remount:
+ mkpath(new)
+ run(["umount", old])
+ run(["mount"] + mount_param + [new])
+
+ if _have_systemd:
+ run(["systemctl", "daemon-reload"])
+ self.update()
+
+ def reset(self):
+ self.mountpoints = {} # pagesz : path
+
+
+class RuntimeHugepageConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+
+ hugepage_sizes = info.hugepage_sizes_enabled
+ if len(hugepage_sizes) == 0:
+ raise RuntimeError("Hugepages appear to be disabled")
+ self.total_nr_hugepages = \
+ {page_sz: _find_nr_hugepages(page_sz)
+ for page_sz in hugepage_sizes}
+ for node in info.numa_nodes:
+ for page_sz in hugepage_sizes:
+ self.hugepages_per_node[node, page_sz] = \
+ _find_nr_hugepages(page_sz, node)
+
+ def commit(self):
+ # sanity checks
+
+ # check if user has messed with hugepage sizes
+ supported_sizes = set(info.hugepage_sizes_supported)
+ keys = self.total_nr_hugepages.keys()
+ if set(keys) != set(supported_sizes):
+ diff = supported_sizes.difference(keys)
+ raise ValueError("Missing hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ for d in self.hugepages_per_node:
+ keys = d.keys()
+ if set(keys) != set(supported_sizes):
+ diff = supported_sizes.difference(keys)
+ raise ValueError("Missing hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ # check if all hugepage numbers add up
+ for size in supported_sizes:
+ total_hps = sum([self.hugepages_per_node[node, size]
+ for node in info.numa_nodes])
+ if total_hps != self.total_nr_hugepages[size]:
+ raise ValueError("Total number of hugepages not equal to sum of"
+ "pages on all NUMA nodes")
+
+ # now, commit our configuration
+ for size, value in self.total_nr_hugepages.items():
+ _write_nr_hugepages(size, value)
+ for node, size, value in self.hugepages_per_node.items():
+ _write_nr_hugepages(size, value, node)
+ self.update()
+
+ def reset(self):
+ self.total_nr_hugepages = {}
+ self.hugepages_per_node = {}
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
index eb21cce15..ba0c36537 100755
--- a/usertools/DPDKConfigLib/Util.py
+++ b/usertools/DPDKConfigLib/Util.py
@@ -2,6 +2,25 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+import subprocess
+import re
+import os
+import errno
+
+__PGSZ_UNITS = ['k', 'M', 'G', 'T', 'P']
+
+
+# equivalent to mkdir -p
+def mkpath(path):
+ try:
+ os.makedirs(path)
+ except OSError as e:
+ if e.errno == errno.EEXIST:
+ pass
+ else:
+ raise e
+
+
# read entire file and return the result
def read_file(path):
with open(path, 'r') as f:
@@ -21,6 +40,36 @@ def append_file(path, value):
f.write(value)
+# run command while suppressing its output
+def run(args):
+ try:
+ subprocess.check_output(args, stderr=None)
+ except subprocess.CalledProcessError:
+ return False
+ return True
+
+
+def kilobytes_to_human_readable(value):
+ for unit in __PGSZ_UNITS:
+ if abs(value) < 1024:
+ cur_unit = unit
+ break
+ value /= 1024
+ else:
+ raise ValueError("Value too large")
+ return "%i%s" % (value, cur_unit)
+
+
+def human_readable_to_kilobytes(value):
+ m = re.match(r"(\d+)([%s])$" % ''.join(__PGSZ_UNITS), value)
+ if not m:
+ raise ValueError("Invalid value format: %s" % value)
+ ival = int(m.group(1))
+ suffix = m.group(2)
+ pow = __PGSZ_UNITS.index(suffix)
+ return ival * (1024 ** pow)
+
+
# split line into key-value pair, cleaning up the values in the process
def kv_split(line, separator):
# just in case
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 8/9] usertools: add hugepage info script
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (6 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 7/9] usertools/lib: add hugepage information library Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
` (11 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Add a simple hugepage info script for demonstration purposes.
It lists the following information:
- Currently configured persistent hugetlbfs mountpoints (fstab)
- Currently mounted hugetlbfs mountpoints
- Total number of hugepages for each size
- Per-NUMA node number of hugepages for each size
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/hugepage-info.py | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100755 usertools/hugepage-info.py
diff --git a/usertools/hugepage-info.py b/usertools/hugepage-info.py
new file mode 100755
index 000000000..bbea35e7b
--- /dev/null
+++ b/usertools/hugepage-info.py
@@ -0,0 +1,32 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from __future__ import print_function
+from DPDKConfigLib import HugeUtil, PlatformInfo, Util
+
+pc = HugeUtil.PersistentMountpointConfig()
+print("Persistent hugetlbfs mountpoints:")
+
+for sz, mp in pc.mountpoints.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), mp))
+
+rc = HugeUtil.RuntimeMountpointConfig()
+print("Current hugetlbfs mountpoints:")
+
+for sz, mp in rc.mountpoints.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), mp))
+
+info = PlatformInfo.PlatformInfo()
+rhc = HugeUtil.RuntimeHugepageConfig()
+print("Current hugepage configuration:")
+for sz, nr in rhc.total_nr_hugepages.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), nr))
+
+print("Current per-NUMA node configuration:")
+for node in info.numa_nodes:
+ for pagesz in info.hugepage_sizes_supported:
+ print("[Node %s] %s: %s" % (node,
+ Util.kilobytes_to_human_readable(pagesz),
+ rhc.hugepages_per_node[node, pagesz]))
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (7 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 8/9] usertools: add hugepage info script Anatoly Burakov
@ 2018-06-25 15:59 ` Anatoly Burakov
2018-06-26 1:09 ` Kevin Wilson
2018-08-14 10:11 ` [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Burakov, Anatoly
` (10 subsequent siblings)
19 siblings, 1 reply; 36+ messages in thread
From: Anatoly Burakov @ 2018-06-25 15:59 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
This library is highly experimental and can kill kittens, but its
main purpose is to automatically set up GRUB command-line to
allocate a given number of hugepages at boot time. It works in
a similar way HugeUtil library does, but instead of committing
changes to fstab or runtime configuration, it commits its
changes to GRUB default command-line and updates all GRUB entries
afterwards. I got it to a state where it's safe to use on my
system, but see the part above about killing kittens - you have
been warned :)
No example scripts will currently be provided.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/GrubHugeUtil.py | 175 ++++++++++++++++++++++++
1 file changed, 175 insertions(+)
create mode 100755 usertools/DPDKConfigLib/GrubHugeUtil.py
diff --git a/usertools/DPDKConfigLib/GrubHugeUtil.py b/usertools/DPDKConfigLib/GrubHugeUtil.py
new file mode 100755
index 000000000..4b8e349b8
--- /dev/null
+++ b/usertools/DPDKConfigLib/GrubHugeUtil.py
@@ -0,0 +1,175 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .PlatformInfo import *
+from .Util import *
+import re
+import os
+
+__KERNEL_TRANSPARENT_HP = "/sys/kernel/mm/transparent_hugepage/enabled"
+_GRUB_CMDLINE_PARAM_NAME = "GRUB_CMDLINE_LINUX_DEFAULT"
+
+# local copy of platform info
+info = PlatformInfo()
+
+def _find_linux_default_cmdline():
+ with open("/etc/default/grub") as f:
+ for line in f:
+ line = line.strip()
+ if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
+ return line
+ else:
+ raise RuntimeError("Invalid GRUB default configuration format")
+
+
+def _parse_linux_default_cmdline(line):
+ # get value to the right of equals sign, strip whitespace and quotes,
+ # split into separate keys and make a list of values
+ _, cmdline = kv_split(line, "=")
+ # remove quotes
+ if cmdline[0] == cmdline[-1] == '"':
+ cmdline = cmdline[1:-1]
+
+ return [kv_split(v, "=") for v in cmdline.split()]
+
+
+def _generate_linux_default_cmdline(cmdline):
+ lines = []
+ cmdline_idx = -1
+ with open("/etc/default/grub") as f:
+ for idx, line in enumerate(f):
+ line = line.strip()
+ lines.extend([line])
+ if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
+ cmdline_idx = idx
+ if cmdline_idx == -1:
+ raise RuntimeError("Invalid GRUB default configuration format")
+
+ # write the lines back, replacing one we want
+ with open("/etc/default/grub", "w") as f:
+ for idx, line in enumerate(lines):
+ if idx == cmdline_idx:
+ line = cmdline
+ f.write(line + "\n")
+
+
+def _find_transparent_hugepage():
+ if not os.path.exists(__KERNEL_TRANSPARENT_HP):
+ return None
+ value = read_file(__KERNEL_TRANSPARENT_HP)
+ m = re.search(r"\[([a-z]+)\]", value)
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ return m.group(1)
+
+
+class GrubHugepageConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+
+ hugepage_sizes = info.hugepage_sizes_supported
+ if len(hugepage_sizes) == 0:
+ raise RuntimeError("Hugepages appear to be unsupported")
+ cmdline = _find_linux_default_cmdline()
+ values = _parse_linux_default_cmdline(cmdline)
+
+ # parse values in the list
+ self.default_hugepagesz = info.default_hugepage_size
+ self.transparent_hugepage = _find_transparent_hugepage()
+ sizes = []
+ nrs = []
+ for k, v in values:
+ if k == "default_hugepagesz":
+ self.default_hugepagesz = human_readable_to_kilobytes(v)
+ elif k == "transparent_hugepage":
+ self.transparent_hugepage = v
+ elif k == "hugepagesz":
+ sizes.append(human_readable_to_kilobytes(v))
+ elif k == "hugepages":
+ nrs.append(v)
+ if len(sizes) != len(nrs):
+ raise RuntimeError("GRUB hugepage configuration is wrong")
+ detected_hugepages = dict(zip(sizes, map(int, nrs)))
+ self.nr_hugepages = {size: detected_hugepages.get(size, 0)
+ for size in hugepage_sizes}
+
+ def commit(self):
+ # perform sanity checks - we can't afford invalid data making it into
+ # bootloader config, as that might render user's machine unbootable, so
+ # tread really really carefully
+
+ # first, check if user didn't add any unexpected hugepage sizes
+ configured_sizes = set(self.nr_hugepages.keys())
+ supported_sizes = set(info.hugepage_sizes_supported)
+
+ if configured_sizes != supported_sizes:
+ diff = configured_sizes.difference(supported_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ # check if default hugepage is one of the supported ones
+ if self.default_hugepagesz is not None and\
+ self.default_hugepagesz not in configured_sizes:
+ s = kilobytes_to_human_readable(self.default_hugepagesz)
+ raise ValueError("Unsupported default hugepage size: %i" % s)
+
+ # transparent hugepages support was added in recent kernels, so check
+ # if user is trying to set this
+ if _find_transparent_hugepage() is None and \
+ self.transparent_hugepage is not None:
+ raise ValueError("Transparent hugepages are not unsupported")
+
+ # OK, parameters look to be valid - let's roll
+
+ # read and parse current cmdline
+ cmdline = _find_linux_default_cmdline()
+
+ values = _parse_linux_default_cmdline(cmdline)
+
+ # clear out old data
+ klist = ["transparent_hugepage", "default_hugepagesz",
+ "hugepage", "hugepagesz"]
+ # iterate over a copy so that we could delete items
+ for k, v in values[:]:
+ if k in klist:
+ values.remove((k, v))
+
+ # generate new cmdline
+ cmdline = " ".join([("%s=%s" % (k, v)) if v is not None else k
+ for k, v in values])
+
+ # now, populate cmdline with new data
+ new_items = []
+ for sz, nr in self.nr_hugepages.items():
+ sz = kilobytes_to_human_readable(sz)
+ new_items += "hugepagesz=%s hugepages=%i" % (sz, nr)
+ if self.default_hugepagesz is not None:
+ new_items += "default_hugepagesz=%i" % self.default_hugepagesz
+ if self.transparent_hugepage is not None:
+ new_items += "transparent_hugepage=%s" % self.transparent_hugepage
+
+ cmdline = "%s %s" % (cmdline, " ".join(new_items))
+
+ # strip any extraneous whitespace we may have added
+ cmdline = re.sub(r"\s\s+", " ", cmdline).strip()
+
+ # now, put everything back together
+ cmdline = '%s="%s"' % (_GRUB_CMDLINE_PARAM_NAME, cmdline)
+
+ # write it to config
+ _generate_linux_default_cmdline(cmdline)
+
+ # finally, update GRUB
+ if not run(["update-grub"]):
+ raise RuntimeError("Failed to update GRUB")
+ self.update()
+
+ def reset(self):
+ self.nr_hugepages = {} # pagesz: number
+ self.default_hugepagesz = None
+ self.transparent_hugepage = None
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config
2018-06-25 15:59 ` [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
@ 2018-06-26 1:09 ` Kevin Wilson
2018-06-26 9:05 ` Burakov, Anatoly
0 siblings, 1 reply; 36+ messages in thread
From: Kevin Wilson @ 2018-06-26 1:09 UTC (permalink / raw)
To: Anatoly Burakov
Cc: dev, john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
Hi, Anatoly,
Thanks for these patches, good work.
Regarding "update-grub": IIRC, this is Ubuntu specific command (and
also used in Debian/Debian based flavors).
In Fedora (RedHat based) recent distros, you use grub2-mkconfig
instead (and there is no "update-grub", IIRC).
If this is true, I would consider adding a comment in the commit log
saying something like "it is for Ubuntu/Debian-based distros".
So maybe in the future someone will add the python code which detects
the OS (using lsb-release, etc) and, in case it is Fedora/RedHat
distro, the grub2-mkconfig util
will be invoked instead.
Regards,
KW
On Mon, Jun 25, 2018 at 6:59 PM, Anatoly Burakov
<anatoly.burakov@intel.com> wrote:
> This library is highly experimental and can kill kittens, but its
> main purpose is to automatically set up GRUB command-line to
> allocate a given number of hugepages at boot time. It works in
> a similar way HugeUtil library does, but instead of committing
> changes to fstab or runtime configuration, it commits its
> changes to GRUB default command-line and updates all GRUB entries
> afterwards. I got it to a state where it's safe to use on my
> system, but see the part above about killing kittens - you have
> been warned :)
>
> No example scripts will currently be provided.
>
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> ---
> usertools/DPDKConfigLib/GrubHugeUtil.py | 175 ++++++++++++++++++++++++
> 1 file changed, 175 insertions(+)
> create mode 100755 usertools/DPDKConfigLib/GrubHugeUtil.py
>
> diff --git a/usertools/DPDKConfigLib/GrubHugeUtil.py b/usertools/DPDKConfigLib/GrubHugeUtil.py
> new file mode 100755
> index 000000000..4b8e349b8
> --- /dev/null
> +++ b/usertools/DPDKConfigLib/GrubHugeUtil.py
> @@ -0,0 +1,175 @@
> +#!/usr/bin/env python
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2018 Intel Corporation
> +
> +
> +from .PlatformInfo import *
> +from .Util import *
> +import re
> +import os
> +
> +__KERNEL_TRANSPARENT_HP = "/sys/kernel/mm/transparent_hugepage/enabled"
> +_GRUB_CMDLINE_PARAM_NAME = "GRUB_CMDLINE_LINUX_DEFAULT"
> +
> +# local copy of platform info
> +info = PlatformInfo()
> +
> +def _find_linux_default_cmdline():
> + with open("/etc/default/grub") as f:
> + for line in f:
> + line = line.strip()
> + if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
> + return line
> + else:
> + raise RuntimeError("Invalid GRUB default configuration format")
> +
> +
> +def _parse_linux_default_cmdline(line):
> + # get value to the right of equals sign, strip whitespace and quotes,
> + # split into separate keys and make a list of values
> + _, cmdline = kv_split(line, "=")
> + # remove quotes
> + if cmdline[0] == cmdline[-1] == '"':
> + cmdline = cmdline[1:-1]
> +
> + return [kv_split(v, "=") for v in cmdline.split()]
> +
> +
> +def _generate_linux_default_cmdline(cmdline):
> + lines = []
> + cmdline_idx = -1
> + with open("/etc/default/grub") as f:
> + for idx, line in enumerate(f):
> + line = line.strip()
> + lines.extend([line])
> + if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
> + cmdline_idx = idx
> + if cmdline_idx == -1:
> + raise RuntimeError("Invalid GRUB default configuration format")
> +
> + # write the lines back, replacing one we want
> + with open("/etc/default/grub", "w") as f:
> + for idx, line in enumerate(lines):
> + if idx == cmdline_idx:
> + line = cmdline
> + f.write(line + "\n")
> +
> +
> +def _find_transparent_hugepage():
> + if not os.path.exists(__KERNEL_TRANSPARENT_HP):
> + return None
> + value = read_file(__KERNEL_TRANSPARENT_HP)
> + m = re.search(r"\[([a-z]+)\]", value)
> + if not m:
> + raise RuntimeError("BUG: Bad regular expression")
> + return m.group(1)
> +
> +
> +class GrubHugepageConfig:
> + def __init__(self):
> + self.update()
> +
> + def update(self):
> + self.reset()
> +
> + hugepage_sizes = info.hugepage_sizes_supported
> + if len(hugepage_sizes) == 0:
> + raise RuntimeError("Hugepages appear to be unsupported")
> + cmdline = _find_linux_default_cmdline()
> + values = _parse_linux_default_cmdline(cmdline)
> +
> + # parse values in the list
> + self.default_hugepagesz = info.default_hugepage_size
> + self.transparent_hugepage = _find_transparent_hugepage()
> + sizes = []
> + nrs = []
> + for k, v in values:
> + if k == "default_hugepagesz":
> + self.default_hugepagesz = human_readable_to_kilobytes(v)
> + elif k == "transparent_hugepage":
> + self.transparent_hugepage = v
> + elif k == "hugepagesz":
> + sizes.append(human_readable_to_kilobytes(v))
> + elif k == "hugepages":
> + nrs.append(v)
> + if len(sizes) != len(nrs):
> + raise RuntimeError("GRUB hugepage configuration is wrong")
> + detected_hugepages = dict(zip(sizes, map(int, nrs)))
> + self.nr_hugepages = {size: detected_hugepages.get(size, 0)
> + for size in hugepage_sizes}
> +
> + def commit(self):
> + # perform sanity checks - we can't afford invalid data making it into
> + # bootloader config, as that might render user's machine unbootable, so
> + # tread really really carefully
> +
> + # first, check if user didn't add any unexpected hugepage sizes
> + configured_sizes = set(self.nr_hugepages.keys())
> + supported_sizes = set(info.hugepage_sizes_supported)
> +
> + if configured_sizes != supported_sizes:
> + diff = configured_sizes.difference(supported_sizes)
> + raise ValueError("Unsupported hugepage sizes: %s" %
> + [kilobytes_to_human_readable(s) for s in diff])
> +
> + # check if default hugepage is one of the supported ones
> + if self.default_hugepagesz is not None and\
> + self.default_hugepagesz not in configured_sizes:
> + s = kilobytes_to_human_readable(self.default_hugepagesz)
> + raise ValueError("Unsupported default hugepage size: %i" % s)
> +
> + # transparent hugepages support was added in recent kernels, so check
> + # if user is trying to set this
> + if _find_transparent_hugepage() is None and \
> + self.transparent_hugepage is not None:
> + raise ValueError("Transparent hugepages are not unsupported")
> +
> + # OK, parameters look to be valid - let's roll
> +
> + # read and parse current cmdline
> + cmdline = _find_linux_default_cmdline()
> +
> + values = _parse_linux_default_cmdline(cmdline)
> +
> + # clear out old data
> + klist = ["transparent_hugepage", "default_hugepagesz",
> + "hugepage", "hugepagesz"]
> + # iterate over a copy so that we could delete items
> + for k, v in values[:]:
> + if k in klist:
> + values.remove((k, v))
> +
> + # generate new cmdline
> + cmdline = " ".join([("%s=%s" % (k, v)) if v is not None else k
> + for k, v in values])
> +
> + # now, populate cmdline with new data
> + new_items = []
> + for sz, nr in self.nr_hugepages.items():
> + sz = kilobytes_to_human_readable(sz)
> + new_items += "hugepagesz=%s hugepages=%i" % (sz, nr)
> + if self.default_hugepagesz is not None:
> + new_items += "default_hugepagesz=%i" % self.default_hugepagesz
> + if self.transparent_hugepage is not None:
> + new_items += "transparent_hugepage=%s" % self.transparent_hugepage
> +
> + cmdline = "%s %s" % (cmdline, " ".join(new_items))
> +
> + # strip any extraneous whitespace we may have added
> + cmdline = re.sub(r"\s\s+", " ", cmdline).strip()
> +
> + # now, put everything back together
> + cmdline = '%s="%s"' % (_GRUB_CMDLINE_PARAM_NAME, cmdline)
> +
> + # write it to config
> + _generate_linux_default_cmdline(cmdline)
> +
> + # finally, update GRUB
> + if not run(["update-grub"]):
> + raise RuntimeError("Failed to update GRUB")
> + self.update()
> +
> + def reset(self):
> + self.nr_hugepages = {} # pagesz: number
> + self.default_hugepagesz = None
> + self.transparent_hugepage = None
> --
> 2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config
2018-06-26 1:09 ` Kevin Wilson
@ 2018-06-26 9:05 ` Burakov, Anatoly
0 siblings, 0 replies; 36+ messages in thread
From: Burakov, Anatoly @ 2018-06-26 9:05 UTC (permalink / raw)
To: Kevin Wilson
Cc: dev, john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
On 26-Jun-18 2:09 AM, Kevin Wilson wrote:
> Hi, Anatoly,
>
> Thanks for these patches, good work.
> Regarding "update-grub": IIRC, this is Ubuntu specific command (and
> also used in Debian/Debian based flavors).
> In Fedora (RedHat based) recent distros, you use grub2-mkconfig
> instead (and there is no "update-grub", IIRC).
> If this is true, I would consider adding a comment in the commit log
> saying something like "it is for Ubuntu/Debian-based distros".
> So maybe in the future someone will add the python code which detects
> the OS (using lsb-release, etc) and, in case it is Fedora/RedHat
> distro, the grub2-mkconfig util
> will be invoked instead.
> Regards,
> KW
>
Hi Kevin,
It wasn't intended to be Ubuntu-specific - that's just what i developed
this patchset on :) Of course, if we get to a v1 stage, this will be
properly implemented to work on all distributions supported by DPDK.
Thanks for your feedback!
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (8 preceding siblings ...)
2018-06-25 15:59 ` [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
@ 2018-08-14 10:11 ` Burakov, Anatoly
2018-08-28 8:16 ` Burakov, Anatoly
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 " Anatoly Burakov
` (9 subsequent siblings)
19 siblings, 1 reply; 36+ messages in thread
From: Burakov, Anatoly @ 2018-08-14 10:11 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
On 25-Jun-18 4:59 PM, Anatoly Burakov wrote:
> This patchset attempts to create a library out of Python scripts that
> come with DPDK, with a goal of enabling external tools to get the same
> information about the system DPDK has, and perhaps configure DPDK.
>
> Potential applications include:
>
> * Better setup.sh script (it's long overdue, and you know it!)
> * Easier development of better tools for developers (see hugepage-info
> example)
> * Easier gathering of DPDK-centric system information, has potential
> applications in troubleshooting tools
> * Reduce code duplication for external tools seeking to use the same
> functionality (bind-unbind, cpu layout, etc)
> * Add cross-platform support for our scripts (see cpu-layout example
> now working on FreeBSD)
>
> There are a few things to mention. First of all, it's an RFC, so the
> fact that it's unfinished and maybe awkward comes with the territory.
> I am also aware of the fact that it's a Python library, that it's
> outside the scope of DPDK and that it's somewhat a Not-Invented-Here
> kind of proposition where there are a lot of externally available
> (and arguably much better designed and implemented) tools that do the
> same thing.
>
> So the first question i would like to ask is, is the community at all
> interested in something like this? Does it have to be part of DPDK
> repository? Can it be maintained in a separate repository? How do we
> handle updates and dependencies?
>
> I should also mention that it is *not* intended to be a replacement
> for udev or any other method of device binding - if anything, it's
> the opposite, in that it takes the whole issue out of the question
> and thus would make switching to udev or any other device binding
> easier since both internal and external tools can utilize the same
> Python API.
>
I would like to draw attention to this RFC again :)
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts
2018-08-14 10:11 ` [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Burakov, Anatoly
@ 2018-08-28 8:16 ` Burakov, Anatoly
0 siblings, 0 replies; 36+ messages in thread
From: Burakov, Anatoly @ 2018-08-28 8:16 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal
On 14-Aug-18 11:11 AM, Burakov, Anatoly wrote:
> On 25-Jun-18 4:59 PM, Anatoly Burakov wrote:
>> This patchset attempts to create a library out of Python scripts that
>> come with DPDK, with a goal of enabling external tools to get the same
>> information about the system DPDK has, and perhaps configure DPDK.
>>
>> Potential applications include:
>>
>> * Better setup.sh script (it's long overdue, and you know it!)
>> * Easier development of better tools for developers (see hugepage-info
>> example)
>> * Easier gathering of DPDK-centric system information, has potential
>> applications in troubleshooting tools
>> * Reduce code duplication for external tools seeking to use the same
>> functionality (bind-unbind, cpu layout, etc)
>> * Add cross-platform support for our scripts (see cpu-layout example
>> now working on FreeBSD)
>>
>> There are a few things to mention. First of all, it's an RFC, so the
>> fact that it's unfinished and maybe awkward comes with the territory.
>> I am also aware of the fact that it's a Python library, that it's
>> outside the scope of DPDK and that it's somewhat a Not-Invented-Here
>> kind of proposition where there are a lot of externally available
>> (and arguably much better designed and implemented) tools that do the
>> same thing.
>>
>> So the first question i would like to ask is, is the community at all
>> interested in something like this? Does it have to be part of DPDK
>> repository? Can it be maintained in a separate repository? How do we
>> handle updates and dependencies?
>>
>> I should also mention that it is *not* intended to be a replacement
>> for udev or any other method of device binding - if anything, it's
>> the opposite, in that it takes the whole issue out of the question
>> and thus would make switching to udev or any other device binding
>> easier since both internal and external tools can utilize the same
>> Python API.
>>
>
> I would like to draw attention to this RFC again :)
>
Ping?
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 0/9] Modularize and enhance DPDK Python scripts
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (9 preceding siblings ...)
2018-08-14 10:11 ` [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Burakov, Anatoly
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library Anatoly Burakov
` (8 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
This patchset attempts to create a library out of Python scripts that
come with DPDK, with a goal of enabling external tools to get the same
information about the system DPDK has, and perhaps configure DPDK.
Potential applications include:
* Better setup.sh script (it's long overdue, and you know it!)
* Easier development of better tools for developers (see hugepage-info
example)
* Easier gathering of DPDK-centric system information, has potential
applications in troubleshooting tools
* Reduce code duplication for internal (e.g. quickstart [1], setup.sh)
and external tools seeking to use the same functionality
* Add cross-platform support for our scripts (see cpu-layout example
now working on FreeBSD)
There are a few things to mention. First of all, it's an RFC, so the
fact that it's unfinished and maybe awkward comes with the territory.
I am also aware of the fact that it's a Python library, that it's
outside the scope of DPDK and that it's somewhat a Not-Invented-Here
kind of proposition where there are a lot of externally available
(which are much better designed and implemented) tools that do the
same thing.
So the first question i would like to ask is, is the community at all
interested in something like this? Does it have to be part of DPDK
repository? Can it be maintained in a separate repository? How do we
handle updates and dependencies?
An alternative approach to something like this would be to
acknowledge the fact that we cannot do everything on our own, and
pull in additional dependencies (preferably automatically - this
can be done through pip, everyone has it and it's not that hard!)
instead of relying on hacky scripts we currently have. The point
is - we do need better tooling, better setup scripts and better
OS/machine logging/troubleshooting tools.
I should also mention that it is *not* intended to be a replacement
for udev or any other method of device binding - if anything, it's
the opposite, in that it takes the whole issue out of the question
and thus would make switching to udev or any other device binding
easier since both internal and external tools can utilize the same
Python API.
[1] http://patches.dpdk.org/patch/47475/
RFC v2:
- Rebased on latest 18.11 master (rc3)
- Added compressdev support in DevInfo library
Anatoly Burakov (9):
usertools: add DPDK config lib python library
usertools/lib: add platform info library
usertools/cpu_layout: rewrite to use DPDKConfigLib
usertools/lib: support FreeBSD for platform info
usertools/lib: add device information library
usertools/devbind: switch to using DPDKConfigLib
usertools/lib: add hugepage information library
usertools: add hugepage info script
usertools/lib: add GRUB utility library for hugepage config
usertools/DPDKConfigLib/DevInfo.py | 424 +++++++++++++++++++
usertools/DPDKConfigLib/DevUtil.py | 242 +++++++++++
usertools/DPDKConfigLib/GrubHugeUtil.py | 175 ++++++++
usertools/DPDKConfigLib/HugeUtil.py | 309 ++++++++++++++
usertools/DPDKConfigLib/PlatformInfo.py | 205 +++++++++
usertools/DPDKConfigLib/Util.py | 84 ++++
usertools/DPDKConfigLib/__init__.py | 0
usertools/cpu_layout.py | 53 +--
usertools/dpdk-devbind.py | 533 ++++--------------------
usertools/hugepage-info.py | 32 ++
10 files changed, 1558 insertions(+), 499 deletions(-)
create mode 100755 usertools/DPDKConfigLib/DevInfo.py
create mode 100755 usertools/DPDKConfigLib/DevUtil.py
create mode 100755 usertools/DPDKConfigLib/GrubHugeUtil.py
create mode 100755 usertools/DPDKConfigLib/HugeUtil.py
create mode 100755 usertools/DPDKConfigLib/PlatformInfo.py
create mode 100755 usertools/DPDKConfigLib/Util.py
create mode 100644 usertools/DPDKConfigLib/__init__.py
create mode 100755 usertools/hugepage-info.py
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (10 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 " Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-16 0:45 ` Stephen Hemminger
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 2/9] usertools/lib: add platform info library Anatoly Burakov
` (7 subsequent siblings)
19 siblings, 1 reply; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: file,
'/home/anatoly/patches/dpdk_config_lib/rfc_v2/v2-0001-usertools-add-DPDK-config-lib-python-library.patch',
doesn't, appear, to, be, a, patch.Add, -f, options?,
john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
This is a placeholder for Python library abstracting away many of
mundane details DPDK configuration scripts have to deal with. We
need __init__.py file to make the subdirectory a package so that
Python scripts in usertools/ can find their dependencies.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/__init__.py | 0
1 file changed, 0 insertions(+), 0 deletions(-)
create mode 100644 usertools/DPDKConfigLib/__init__.py
diff --git a/usertools/DPDKConfigLib/__init__.py b/usertools/DPDKConfigLib/__init__.py
new file mode 100644
index 000000000..e69de29bb
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 2/9] usertools/lib: add platform info library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (11 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
` (6 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
Add a library that will parse system information:
* NUMA nodes
* Cores and threads
* Mapping from NUMA node and core to thread id's
* Hyperthreading support status
* RAM size
* Default hugepage size as reported by kernel
This can be used by scripts.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/PlatformInfo.py | 130 ++++++++++++++++++++++++
usertools/DPDKConfigLib/Util.py | 16 +++
2 files changed, 146 insertions(+)
create mode 100755 usertools/DPDKConfigLib/PlatformInfo.py
create mode 100755 usertools/DPDKConfigLib/Util.py
diff --git a/usertools/DPDKConfigLib/PlatformInfo.py b/usertools/DPDKConfigLib/PlatformInfo.py
new file mode 100755
index 000000000..734d22026
--- /dev/null
+++ b/usertools/DPDKConfigLib/PlatformInfo.py
@@ -0,0 +1,130 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .Util import *
+import re
+import glob
+
+__SYSFS_CPU_INFO_PATH = "/sys/devices/system/cpu"
+__SYSFS_IOMMU_CLASS_PATH = "/sys/class/iommu"
+__KERNEL_HPSZ_PATH = "/sys/kernel/mm/hugepages/hugepages-*"
+
+try:
+ xrange # python 2
+except NameError:
+ xrange = range # python 3
+
+
+__CPU_FLAGS_TO_HP_SIZE = {
+ # x86 supports 2M and 1G pages
+ "pse": 2048,
+ "pdpe1gb": 1048576
+}
+__IOMMU_CPU_FLAGS = ["vmx", "vms"]
+
+__HT_CPU_FLAGS = ["ht"]
+
+
+def _parse_cpuinfo(pinfo):
+ core_info_list = []
+ with open("/proc/cpuinfo") as f:
+ cur_core = {}
+ for line in f:
+ line = line.strip()
+ # if we've reached end of current core info, store it and clear it
+ if line == "":
+ core_info_list.append(cur_core)
+ cur_core = {}
+ continue
+ key, value = kv_split(line, ":")
+ cur_core[key] = value
+ # parse flags - they're the same for all CPU's so only parse the first one
+ flags = set(core_info_list[0]["flags"].split())
+ for flag in flags:
+ if flag in __CPU_FLAGS_TO_HP_SIZE:
+ pinfo.hugepage_sizes_supported.append(__CPU_FLAGS_TO_HP_SIZE[flag])
+ elif flag in __IOMMU_CPU_FLAGS:
+ pinfo.iommu_supported = True
+ elif flag in __HT_CPU_FLAGS:
+ pinfo.hyperthreading_supported = True
+
+ # parse cores and sockets
+ numa_nodes = set()
+ core_map = {}
+ for core_dict in core_info_list:
+ thread_id = int(core_dict["processor"])
+ core_id = int(core_dict["core id"])
+ numa_node = int(core_dict["physical id"])
+
+ core_map.setdefault((numa_node, core_id), []).append(thread_id)
+ numa_nodes.add(numa_node)
+
+ # now, populate PlatformInfo with our, well, info - convert to lists
+ pinfo.numa_nodes = list(numa_nodes)
+ pinfo.core_map = core_map
+
+
+def _parse_meminfo(pinfo):
+ meminfo_data = {}
+ with open("/proc/meminfo") as f:
+ for line in f:
+ key, value = kv_split(line, ":")
+ meminfo_data[key] = value
+
+ # regex used to capture kilobytes
+ r = re.compile("(\d+) kB")
+
+ # total ram size
+ m = r.match(meminfo_data["MemTotal"])
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ pinfo.ram_size = int(m.group(1))
+
+ # hugepages may not be supported
+ if "Hugepagesize" in meminfo_data:
+ m = r.match(meminfo_data["Hugepagesize"])
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ pinfo.default_hugepage_size = int(m.group(1))
+
+
+def _find_enabled_hugepage_sizes():
+ paths = glob.glob(__KERNEL_HPSZ_PATH)
+ r = re.compile("hugepages-(\d+)kB")
+ sizes = []
+ for p in paths:
+ p = os.path.basename(p)
+ m = r.search(p)
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ sizes.append(int(m.group(1)))
+ return sizes
+
+
+def _iommu_is_enabled():
+ pass
+
+
+class PlatformInfo:
+ def __init__(self):
+ self.update()
+
+ def reset(self):
+ self.numa_nodes = []
+ self.hyperthreading_supported = False
+ self.core_map = {} # numa_node, core_id: [thread_id]
+ self.iommu_supported = False
+ self.iommu_mode = ""
+ self.bootloader_iommu_mode = ""
+ self.hugepage_sizes_supported = []
+ self.hugepage_sizes_enabled = []
+ self.default_hugepage_size = 0
+ self.ram_size = 0
+
+ def update(self):
+ self.reset()
+ _parse_cpuinfo(self)
+ _parse_meminfo(self)
+ self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
new file mode 100755
index 000000000..42434e728
--- /dev/null
+++ b/usertools/DPDKConfigLib/Util.py
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+# split line into key-value pair, cleaning up the values in the process
+def kv_split(line, separator):
+ # just in case
+ line = line.strip()
+
+ tokens = line.split(separator, 1)
+ key, value = None, None
+ if len(tokens) > 0:
+ key = tokens[0].strip()
+ if len(tokens) > 1:
+ value = tokens[1].strip()
+ return key, value
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (12 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 2/9] usertools/lib: add platform info library Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
` (5 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
Rewrite cpu layout script to use data provided by DPDKConfigLib
script. This demonstrates an example of how external tools can get
the same information from DPDKConfigLib.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/cpu_layout.py | 53 ++++++++++-------------------------------
1 file changed, 13 insertions(+), 40 deletions(-)
diff --git a/usertools/cpu_layout.py b/usertools/cpu_layout.py
index 6f129b1db..af950361c 100755
--- a/usertools/cpu_layout.py
+++ b/usertools/cpu_layout.py
@@ -1,73 +1,46 @@
#!/usr/bin/env python
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2018 Intel Corporation
# Copyright(c) 2017 Cavium, Inc. All rights reserved.
from __future__ import print_function
-import sys
-try:
- xrange # Python 2
-except NameError:
- xrange = range # Python 3
+from DPDKConfigLib import PlatformInfo
-sockets = []
-cores = []
-core_map = {}
+info = PlatformInfo.PlatformInfo()
base_path = "/sys/devices/system/cpu"
-fd = open("{}/kernel_max".format(base_path))
-max_cpus = int(fd.read())
-fd.close()
-for cpu in xrange(max_cpus + 1):
- try:
- fd = open("{}/cpu{}/topology/core_id".format(base_path, cpu))
- except IOError:
- continue
- except:
- break
- core = int(fd.read())
- fd.close()
- fd = open("{}/cpu{}/topology/physical_package_id".format(base_path, cpu))
- socket = int(fd.read())
- fd.close()
- if core not in cores:
- cores.append(core)
- if socket not in sockets:
- sockets.append(socket)
- key = (socket, core)
- if key not in core_map:
- core_map[key] = []
- core_map[key].append(cpu)
+
+cores = sorted(set([core for _, core in info.core_map]))
print(format("=" * (47 + len(base_path))))
print("Core and Socket Information (as reported by '{}')".format(base_path))
print("{}\n".format("=" * (47 + len(base_path))))
print("cores = ", cores)
-print("sockets = ", sockets)
+print("sockets = ", info.numa_nodes)
print("")
-max_processor_len = len(str(len(cores) * len(sockets) * 2 - 1))
-max_thread_count = len(list(core_map.values())[0])
+max_processor_len = len(str(len(cores) * len(info.numa_nodes) * 2 - 1))
+max_thread_count = len(info.core_map.values()[0])
max_core_map_len = (max_processor_len * max_thread_count) \
+ len(", ") * (max_thread_count - 1) \
+ len('[]') + len('Socket ')
max_core_id_len = len(str(max(cores)))
output = " ".ljust(max_core_id_len + len('Core '))
-for s in sockets:
+for s in info.numa_nodes:
output += " Socket %s" % str(s).ljust(max_core_map_len - len('Socket '))
print(output)
output = " ".ljust(max_core_id_len + len('Core '))
-for s in sockets:
+for s in info.numa_nodes:
output += " --------".ljust(max_core_map_len)
output += " "
print(output)
for c in cores:
output = "Core %s" % str(c).ljust(max_core_id_len)
- for s in sockets:
- if (s,c) in core_map:
- output += " " + str(core_map[(s, c)]).ljust(max_core_map_len)
+ for s in info.numa_nodes:
+ if (s, c) in info.core_map:
+ output += " " + str(info.core_map[(s, c)]).ljust(max_core_map_len)
else:
output += " " * (max_core_map_len + 1)
print(output)
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 4/9] usertools/lib: support FreeBSD for platform info
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (13 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 5/9] usertools/lib: add device information library Anatoly Burakov
` (4 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
This enables FreeBSD support for PlatformInfo part of the
DPDKConfigLib script, thereby enabling FreeBSD support for the
cpu_layout script.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/PlatformInfo.py | 81 ++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 3 deletions(-)
diff --git a/usertools/DPDKConfigLib/PlatformInfo.py b/usertools/DPDKConfigLib/PlatformInfo.py
index 734d22026..4ca507a37 100755
--- a/usertools/DPDKConfigLib/PlatformInfo.py
+++ b/usertools/DPDKConfigLib/PlatformInfo.py
@@ -6,6 +6,15 @@
from .Util import *
import re
import glob
+import platform
+import subprocess
+import string
+import xml.etree.ElementTree # for FreeBSD topology parsing
+try:
+ import queue # python 3
+except ImportError:
+ import Queue as queue # python 2
+
__SYSFS_CPU_INFO_PATH = "/sys/devices/system/cpu"
__SYSFS_IOMMU_CLASS_PATH = "/sys/class/iommu"
@@ -26,6 +35,9 @@
__HT_CPU_FLAGS = ["ht"]
+__SYSCTL_TOPOLOGY_CMDLINE = ['sysctl', '-b', 'kern.sched.topology_spec']
+__SYSCTL_MEM_CMDLINE = ['sysctl', 'hw.realmem']
+
def _parse_cpuinfo(pinfo):
core_info_list = []
@@ -107,6 +119,56 @@ def _iommu_is_enabled():
pass
+def _parse_sysctl_cpu_topology(pinfo):
+ output = subprocess.check_output(__SYSCTL_TOPOLOGY_CMDLINE)
+
+ # output from sysctl contains null terminator, remove it
+ raw_xml = output[:-1]
+ tree = xml.etree.ElementTree.fromstring(raw_xml)
+ groups = queue.Queue()
+
+ # put first group onto the queue
+ for e in tree.findall('group'):
+ groups.put(e)
+
+ # per-level list of cores
+ levels = {}
+
+ while not groups.empty():
+ group = groups.get()
+ level = int(group.get('level'))
+ cpus = [int(cpu) for cpu in group.find('cpu').text.split(",")]
+ cur_value = levels.setdefault(level, [])
+
+ # store discovered cpu's
+ cur_value.append(cpus)
+ levels[level] = cur_value
+
+ children = group.find('children')
+ if children is not None:
+ for c in children.findall('group'):
+ groups.put(c)
+
+ # find deepest level
+ max_level = max(levels.keys())
+
+ # for each group in the deepest level, take first CPU and make it physical
+ # core id
+ for cpus in levels[max_level]:
+ pinfo.core_map[pinfo.numa_nodes[0], cpus[0]] = cpus
+
+ # also make note of hyperthreading
+ if len(cpus) > 1:
+ pinfo.hyperthreading_supported = True
+
+
+def _parse_sysctl_ram_size():
+ output = subprocess.check_output(__SYSCTL_MEM_CMDLINE)
+ _, mem_str = kv_split(output, ':')
+ mem_amount = int(mem_str) / 1024 # kilobytes
+ return mem_amount
+
+
class PlatformInfo:
def __init__(self):
self.update()
@@ -125,6 +187,19 @@ def reset(self):
def update(self):
self.reset()
- _parse_cpuinfo(self)
- _parse_meminfo(self)
- self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
+ system = platform.system()
+ if system == 'Linux':
+ _parse_cpuinfo(self)
+ _parse_meminfo(self)
+ self.hugepage_sizes_enabled = _find_enabled_hugepage_sizes()
+ elif system == 'FreeBSD':
+ # DPDK doesn't support NUMA on FreeBSD
+ self.numa_nodes = [0]
+ # find number of threads
+ _parse_sysctl_cpu_topology(self)
+ # find RAM size
+ self.ram_size = _parse_sysctl_ram_size()
+ # DPDK doesn't use hugepages on FreeBSD
+ self.hugepage_sizes_supported = []
+ self.hugepage_sizes_enabled = []
+ self.default_hugepage_size = 0
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 5/9] usertools/lib: add device information library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (14 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
` (3 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
This library is mostly copy-paste of devbind script, but with few
additional bells and whistles, such as the ability to enumerate and
create/destroy VF devices.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/DevInfo.py | 424 +++++++++++++++++++++++++++++
usertools/DPDKConfigLib/DevUtil.py | 242 ++++++++++++++++
usertools/DPDKConfigLib/Util.py | 19 ++
3 files changed, 685 insertions(+)
create mode 100755 usertools/DPDKConfigLib/DevInfo.py
create mode 100755 usertools/DPDKConfigLib/DevUtil.py
diff --git a/usertools/DPDKConfigLib/DevInfo.py b/usertools/DPDKConfigLib/DevInfo.py
new file mode 100755
index 000000000..52edae771
--- /dev/null
+++ b/usertools/DPDKConfigLib/DevInfo.py
@@ -0,0 +1,424 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2018 Intel Corporation
+# Copyright(c) 2017 Cavium, Inc. All rights reserved.
+
+import glob
+from .Util import *
+
+__DEFAULT_DPDK_DRIVERS = ["igb_uio", "vfio-pci", "uio_pci_generic"]
+__dpdk_drivers = None # list of detected dpdk drivers
+__devices = None # map from PCI address to device objects
+
+# The PCI base class for all devices
+__network_class = {'Class': '02', 'Vendor': None, 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__encryption_class = {'Class': '10', 'Vendor': None, 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__intel_processor_class = {'Class': '0b', 'Vendor': '8086', 'Device': None,
+ 'SVendor': None, 'SDevice': None}
+__cavium_sso = {'Class': '08', 'Vendor': '177d', 'Device': 'a04b,a04d',
+ 'SVendor': None, 'SDevice': None}
+__cavium_fpa = {'Class': '08', 'Vendor': '177d', 'Device': 'a053',
+ 'SVendor': None, 'SDevice': None}
+__cavium_pkx = {'Class': '08', 'Vendor': '177d', 'Device': 'a0dd,a049',
+ 'SVendor': None, 'SDevice': None}
+__cavium_tim = {'Class': '08', 'Vendor': '177d', 'Device': 'a051',
+ 'SVendor': None, 'SDevice': None}
+__cavium_zip = {'Class': '12', 'Vendor': '177d', 'Device': 'a037',
+ 'SVendor': None, 'SDevice': None}
+__avp_vnic = {'Class': '05', 'Vendor': '1af4', 'Device': '1110',
+ 'SVendor': None, 'SDevice': None}
+
+# internal data, not supposed to be exposed, but available to local classes
+_network_devices = [__network_class, __cavium_pkx, __avp_vnic]
+_crypto_devices = [__encryption_class, __intel_processor_class]
+_eventdev_devices = [__cavium_sso, __cavium_tim]
+_mempool_devices = [__cavium_fpa]
+_compress_devices = [__cavium_zip]
+
+__DRIVER_PATH_FMT = "/sys/bus/pci/drivers/%s/"
+__DEVICE_PATH_FMT = "/sys/bus/pci/devices/%s/"
+
+
+def _get_pci_speed_info(pci_addr):
+ data = subprocess.check_output(["lspci", "-vvs", pci_addr]).splitlines()
+
+ # scan until we find capability structure
+ raw_data = {}
+ cur_key = ""
+ r = re.compile(r"Express \(v\d\) Endpoint") # PCI-E cap
+ found_pci_express_cap = False
+ for line in data:
+ key, value = kv_split(line, ":")
+ if not found_pci_express_cap:
+ if key != "Capabilities":
+ continue
+ # this is a capability structure - check if it's a PCI-E cap
+ m = r.search(value)
+ if not m:
+ continue # not a PCI-E cap
+ found_pci_express_cap = True
+ continue # start scanning for info
+ elif key == "Capabilities":
+ break # we've reached end of our PCI-E cap structure
+ if value is not None:
+ # this is a new key
+ cur_key = key
+ else:
+ value = key # this is continuation of previous key
+ raw_data[cur_key] = " ".join([raw_data.get(cur_key, ""), value])
+
+ # now, get our data out of there
+ result = {
+ "speed_supported": 0,
+ "width_supported": 0,
+ "speed_active": 0,
+ "width_active": 0
+ }
+ speed_re = re.compile(r"Speed (\d+(\.\d+)?)GT/s")
+ width_re = re.compile(r"Width x(\d+)")
+
+ val = raw_data.get("LnkCap", "")
+ speed_m = speed_re.search(val)
+ width_m = width_re.search(val)
+ # return empty
+ if speed_m:
+ result["speed_supported"] = float(speed_m.group(1))
+ if width_m:
+ result["width_supported"] = int(width_m.group(1))
+
+ val = raw_data.get("LnkSta", "")
+ speed_m = speed_re.search(val)
+ width_m = width_re.search(val)
+ if speed_m:
+ result["speed_active"] = float(speed_m.group(1))
+ if width_m:
+ result["width_active"] = int(width_m.group(1))
+ return result
+
+
+def _device_type_match(dev_dict, devices_type):
+ for i in range(len(devices_type)):
+ param_count = len(
+ [x for x in devices_type[i].values() if x is not None])
+ match_count = 0
+ if dev_dict["Class"][0:2] == devices_type[i]["Class"]:
+ match_count = match_count + 1
+ for key in devices_type[i].keys():
+ if key != 'Class' and devices_type[i][key]:
+ value_list = devices_type[i][key].split(',')
+ for value in value_list:
+ if value.strip() == dev_dict[key]:
+ match_count = match_count + 1
+ # count must be the number of non None parameters to match
+ if match_count == param_count:
+ return True
+ return False
+
+
+def _get_numa_node(addr):
+ path = get_device_path(addr, "numa_node")
+ if not os.path.isfile(path):
+ return 0
+ val = int(read_file(path))
+ return val if val >= 0 else 0
+
+
+def _basename_from_symlink(path):
+ if not os.path.islink(path):
+ raise ValueError("Invalid link: %s" % path)
+ return os.path.basename(os.path.realpath(path))
+
+
+def _get_pf_addr(pci_addr):
+ return _basename_from_symlink(get_device_path(pci_addr, "physfn"))
+
+
+def _get_vf_addrs(pci_addr):
+ vf_path = get_device_path(pci_addr, "virtfn*")
+ return [_basename_from_symlink(path) for path in glob.glob(vf_path)]
+
+
+def _get_total_vfs(pci_addr):
+ path = get_device_path(pci_addr, "sriov_totalvfs")
+ if not os.path.isfile(path):
+ return 0
+ return int(read_file(path))
+
+
+# not allowed to use Enum because it's Python3.4+, so...
+class DeviceType:
+ '''Device type identifier'''
+ DEVTYPE_UNKNOWN = -1
+ DEVTYPE_NETWORK = 0
+ DEVTYPE_CRYPTO = 1
+ DEVTYPE_EVENT = 2
+ DEVTYPE_MEMPOOL = 3
+ DEVTYPE_COMPRESS = 4
+
+
+class DevInfo(object):
+ # map from lspci output to DevInfo attributes
+ __attr_map = {
+ 'Class': 'class_id',
+ 'Vendor': 'vendor_id',
+ 'Device': 'device_id',
+ 'SVendor': 'subsystem_vendor_id',
+ 'SDevice': 'subsystem_device_id',
+ 'Class_str': 'class_name',
+ 'Vendor_str': 'vendor_name',
+ 'Device_str': 'device_name',
+ 'SVendor_str': 'subsystem_vendor_name',
+ 'SDevice_str': 'subsystem_device_name',
+ 'Driver': 'active_driver'
+ }
+
+ def __init__(self, pci_addr):
+ self.pci_addr = pci_addr # Slot
+
+ # initialize all attributes
+ self.reset()
+
+ # we know our PCI address at this point, so read lspci
+ self.update()
+
+ def reset(self):
+ self.devtype = DeviceType.DEVTYPE_UNKNOWN # start with unknown type
+ self.class_id = "" # Class
+ self.vendor_id = "" # Vendor
+ self.device_id = "" # Device
+ self.subsystem_vendor_id = "" # SVendor
+ self.subsystem_device_id = "" # SDevice
+ self.class_name = "" # Class_str
+ self.vendor_name = "" # Vendor_str
+ self.device_name = "" # Device_str
+ self.subsystem_vendor_name = "" # SVendor_str
+ self.subsystem_device_name = "" # SDevice_str
+ self.kernel_drivers = [] # list of drivers in Module
+ self.active_driver = "" # Driver
+ self.available_drivers = []
+ self.numa_node = -1
+ self.is_virtual_function = False
+ self.virtual_functions = [] # list of VF pci addresses
+ self.physical_function = "" # PF PCI address if this is a VF
+ self.numvfs = 0
+ self.totalvfs = 0
+ self.pci_width_supported = 0
+ self.pci_width_active = 0
+ self.pci_speed_supported = 0
+ self.pci_speed_active = 0
+
+ def update(self):
+ # clear everything
+ self.reset()
+
+ lspci_info = subprocess.check_output(["lspci", "-vmmnnks",
+ self.pci_addr]).splitlines()
+ lspci_dict = {}
+ r = re.compile(r"\[[\da-f]{4}\]$")
+
+ # parse lspci details
+ for line in lspci_info:
+ if len(line) == 0:
+ continue
+ name, value = line.decode().split("\t", 1)
+ name = name.strip(":")
+ has_id = r.search(value) is not None
+ if has_id:
+ namestr = name + "_str"
+ strvalue = value[:-7] # cut off hex value for _str value
+ value = value[-5:-1] # store hex value
+ lspci_dict[namestr] = strvalue
+ lspci_dict[name] = value
+
+ # update object using map of lspci values to object attributes
+ for key, value in lspci_dict.items():
+ if key in self.__attr_map:
+ setattr(self, self.__attr_map[key], value)
+
+ # match device type
+ if _device_type_match(lspci_dict, _network_devices):
+ self.devtype = DeviceType.DEVTYPE_NETWORK
+ elif _device_type_match(lspci_dict, _crypto_devices):
+ self.devtype = DeviceType.DEVTYPE_CRYPTO
+ elif _device_type_match(lspci_dict, _eventdev_devices):
+ self.devtype = DeviceType.DEVTYPE_EVENT
+ elif _device_type_match(lspci_dict, _mempool_devices):
+ self.devtype = DeviceType.DEVTYPE_MEMPOOL
+ elif _device_type_match(lspci_dict, _compress_devices):
+ self.devtype = DeviceType.DEVTYPE_COMPRESS
+
+ # special case - Module may have several drivers
+ if 'Module' in lspci_dict:
+ module_str = lspci_dict['Module'].split(',')
+ self.kernel_drivers = [d.strip() for d in module_str]
+
+ # read NUMA node
+ self.numa_node = _get_numa_node(self.pci_addr)
+
+ # check if device is a PF or a VF
+ try:
+ pf_addr = _get_pf_addr(self.pci_addr)
+ self.is_virtual_function = True
+ self.physical_function = pf_addr
+ except ValueError:
+ self.virtual_functions = _get_vf_addrs(self.pci_addr)
+ self.numvfs = len(self.virtual_functions)
+ self.totalvfs = _get_total_vfs(self.pci_addr)
+
+ if not self.is_virtual_function:
+ speed_info = _get_pci_speed_info(self.pci_addr)
+ else:
+ speed_info = _get_pci_speed_info(self.physical_function)
+
+ self.pci_width_active = speed_info["width_active"]
+ self.pci_width_supported = speed_info["width_supported"]
+ self.pci_speed_active = speed_info["speed_active"]
+ self.pci_speed_supported = speed_info["speed_supported"]
+
+ # update available drivers
+ all_drivers = self.kernel_drivers + get_loaded_dpdk_drivers()
+ self.available_drivers = [driver for driver in all_drivers
+ if driver != self.active_driver]
+
+
+# extends PCI device info with a few things unique to network devices
+class NetworkDevInfo(DevInfo):
+ def __init__(self, pci_addr):
+ super(NetworkDevInfo, self).__init__(pci_addr)
+
+ def reset(self):
+ super(NetworkDevInfo, self).reset()
+ self.interfaces = []
+ self.ssh_interface = ""
+ self.active_interface = False
+
+ def update(self):
+ # do regular update from lspci first
+ super(NetworkDevInfo, self).update()
+
+ # now, update network-device-specific stuff
+ dirs = glob.glob(get_device_path(self.pci_addr, "net/*"))
+ self.interfaces = [os.path.basename(d) for d in dirs]
+
+ # check what is the interface if any for an ssh connection if
+ # any to this host, so we can mark it.
+ route = subprocess.check_output(["ip", "-o", "route"])
+ # filter out all lines for 169.254 routes
+ route = "\n".join(filter(lambda ln: not ln.startswith("169.254"),
+ route.decode().splitlines()))
+ rt_info = route.split()
+ for i in range(len(rt_info) - 1):
+ if rt_info[i] == "dev":
+ iface = rt_info[i + 1]
+ if iface in self.interfaces:
+ self.ssh_interface = iface
+ self.active_interface = True
+ break
+
+
+def __update_device_list():
+ global __devices
+
+ __devices = {}
+
+ non_network_devices = _crypto_devices + _mempool_devices +\
+ _eventdev_devices + _compress_devices
+
+ # first loop through and read details for all devices
+ # request machine readable format, with numeric IDs and String
+ dev_dict = {}
+ lspci_lines = subprocess.check_output(["lspci", "-Dvmmnk"]).splitlines()
+ for line in lspci_lines:
+ if line.strip() == "":
+ # we've completed reading this device, so parse it
+ pci_addr = dev_dict['Slot']
+ if _device_type_match(dev_dict, _network_devices):
+ d = NetworkDevInfo(pci_addr)
+ __devices[pci_addr] = d
+ elif _device_type_match(dev_dict, non_network_devices):
+ d = DevInfo(pci_addr)
+ __devices[pci_addr] = d
+ else:
+ # unsupported device, ignore
+ pass
+ dev_dict = {} # clear the dictionary for next
+ continue
+ name, value = line.decode().split("\t", 1)
+ name = name.rstrip(":")
+ # Numeric IDs
+ dev_dict[name] = value
+
+
+def __update_dpdk_driver_list():
+ global __dpdk_drivers
+
+ __dpdk_drivers = __DEFAULT_DPDK_DRIVERS[:] # make a copy
+
+ # list of supported modules
+ mods = [{"Name": driver, "Found": False} for driver in __dpdk_drivers]
+
+ # first check if module is loaded
+ try:
+ # Get list of sysfs modules (both built-in and dynamically loaded)
+ sysfs_path = '/sys/module/'
+
+ # Get the list of directories in sysfs_path
+ sysfs_mods = [os.path.join(sysfs_path, o) for o
+ in os.listdir(sysfs_path)
+ if os.path.isdir(os.path.join(sysfs_path, o))]
+
+ # Extract the last element of '/sys/module/abc' in the array
+ sysfs_mods = [a.split('/')[-1] for a in sysfs_mods]
+
+ # special case for vfio_pci (module is named vfio-pci,
+ # but its .ko is named vfio_pci)
+ sysfs_mods = [a if a != 'vfio_pci' else 'vfio-pci' for a in sysfs_mods]
+
+ for mod in mods:
+ if mod["Name"] in sysfs_mods:
+ mod["Found"] = True
+ except:
+ pass
+
+ # change DPDK driver list to only contain drivers that are loaded
+ __dpdk_drivers = [mod["Name"] for mod in mods if mod["Found"]]
+
+
+# get a file/directory inside sysfs dir for a given PCI address
+def get_device_path(pci_addr, fname):
+ return os.path.join(__DEVICE_PATH_FMT % pci_addr, fname)
+
+
+# get a file/directory inside sysfs dir for a given driver
+def get_driver_path(driver, fname):
+ return os.path.join(__DRIVER_PATH_FMT % driver, fname)
+
+
+def get_loaded_dpdk_drivers(force_refresh=False):
+ '''Get list of loaded DPDK drivers'''
+ global __dpdk_drivers
+
+ if __dpdk_drivers is not None and not force_refresh:
+ return __dpdk_drivers
+
+ __update_dpdk_driver_list()
+
+ return __dpdk_drivers
+
+
+def get_supported_dpdk_drivers():
+ return __DEFAULT_DPDK_DRIVERS
+
+
+def get_devices(force_refresh=False):
+ '''Get list of detected devices'''
+ global __devices
+
+ if __devices is not None and not force_refresh:
+ return __devices
+
+ __update_device_list()
+
+ return __devices
diff --git a/usertools/DPDKConfigLib/DevUtil.py b/usertools/DPDKConfigLib/DevUtil.py
new file mode 100755
index 000000000..17ee657f7
--- /dev/null
+++ b/usertools/DPDKConfigLib/DevUtil.py
@@ -0,0 +1,242 @@
+#!/usr/bin/python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2018 Intel Corporation
+# Copyright(c) 2017 Cavium, Inc. All rights reserved.
+
+from .DevInfo import *
+import errno
+
+
+# check if we have support for driver_override by looking at sysfs and checking
+# if any of the PCI device directories have driver_override file inside them
+__have_override = len(glob.glob("/sys/bus/pci/devices/*/driver_override")) != 0
+
+
+# wrap custom exceptions, so that we can handle errors we expect, but still pass
+# through any unexpected errors to the caller (which might indicate a bug)
+class BindException(Exception):
+ def __init__(self, *args, **kwargs):
+ Exception.__init__(self, *args, **kwargs)
+
+
+class UnbindException(Exception):
+ def __init__(self, *args, **kwargs):
+ Exception.__init__(self, *args, **kwargs)
+
+
+# change num vfs for a given device
+def __write_numvfs(dev, num_vfs):
+ path = get_device_path(dev.pci_addr, "sriov_numvfs")
+ append_file(path, num_vfs)
+ dev.update()
+
+
+# unbind device from its driver
+def __unbind_device(dev):
+ '''Unbind the device identified by "addr" from its current driver'''
+ addr = dev.pci_addr
+
+ # For kernels >= 3.15 driver_override is used to bind a device to a driver.
+ # Before unbinding it, overwrite driver_override with empty string so that
+ # the device can be bound to any other driver.
+ if __have_override:
+ override_fname = get_device_path(dev.pci_addr, "driver_override")
+ try:
+ write_file(override_fname, "\00")
+ except IOError as e:
+ raise UnbindException("Couldn't overwrite 'driver_override' "
+ "for PCI device '%s': %s" %
+ (addr, e.strerror))
+
+ filename = get_driver_path(dev.active_driver, "unbind")
+ try:
+ append_file(filename, addr)
+ except IOError:
+ raise UnbindException("Couldn't unbind PCI device '%s'" % addr)
+ dev.update()
+
+
+# bind device to a specified driver
+def __bind_device_to_driver(dev, driver):
+ '''Bind the device given by "dev_id" to the driver "driver". If the device
+ is already bound to a different driver, it will be unbound first'''
+ addr = dev.pci_addr
+
+ # For kernels >= 3.15 driver_override can be used to specify the driver
+ # for a device rather than relying on the driver to provide a positive
+ # match of the device. The existing process of looking up
+ # the vendor and device ID, adding them to the driver new_id,
+ # will erroneously bind other devices too which has the additional burden
+ # of unbinding those devices
+ if driver in get_loaded_dpdk_drivers():
+ if __have_override:
+ override_fname = get_device_path(dev.pci_addr, "driver_override")
+ try:
+ write_file(override_fname, driver)
+ except IOError as e:
+ raise BindException("Couldn't write 'driver_override' for "
+ "PCI device '%s': %s" % (addr, e.strerror))
+ # For kernels < 3.15 use new_id to add PCI id's to the driver
+ else:
+ newid_fname = get_driver_path(driver, "new_id")
+ try:
+ # Convert Device and Vendor Id to int to write to new_id
+ write_file(newid_fname, "%04x %04x" % (int(dev.vendor_id, 16),
+ int(dev.device_id, 16)))
+ except IOError as e:
+ # for some reason, closing new_id after adding a new PCI
+ # ID to new_id results in IOError (with errno set to
+ # ENODEV). however, if the device was successfully bound, we
+ # don't care for any errors and can safely ignore the
+ # error.
+ if e.errno != errno.ENODEV:
+ raise BindException("Couldn't write 'new_id' for PCI "
+ "device '%s': %s" % (addr, e.strerror))
+
+ print(get_driver_path(driver, "bind"))
+ bind_fname = get_driver_path(driver, "bind")
+ try:
+ append_file(bind_fname, addr)
+ except IOError as e:
+ dev.update()
+ print(driver)
+ print(dev.active_driver)
+ raise BindException("Couldn't bind PCI device '%s' to driver '%s': %s" %
+ (addr, driver, e.strerror))
+ dev.update()
+
+
+def set_num_vfs(dev, num_vfs):
+ if not isinstance(dev, DevInfo):
+ dev = get_devices()[dev]
+ if dev.is_virtual_function:
+ raise ValueError("Device '%s' is a virtual function" % dev.pci_addr)
+ if num_vfs > dev.totalvfs:
+ raise ValueError("Device '%s' has '%i' virtual functions,"
+ "'%i' requested" % (dev.pci_addr, dev.totalvfs,
+ num_vfs))
+ if dev.num_vfs == num_vfs:
+ return
+ __write_numvfs(dev, num_vfs)
+ dev.update()
+
+
+def unbind(addrs, force_unbind=False):
+ '''Unbind device(s) from all drivers'''
+ # build a list if we were not provided a list
+ pci_dev_list = []
+ try:
+ pci_dev_list.extend(addrs)
+ except AttributeError:
+ pci_dev_list.append(addrs)
+
+ # ensure we are only working with DevInfo objects
+ filter_func = (lambda d: d.active_interface != "" and
+ (d.devtype != DeviceType.DEVTYPE_NETWORK or
+ not d.active_interface or not force_unbind))
+ pci_dev_list = filter(filter_func, [a if isinstance(a, DevInfo)
+ else get_devices()[get_device_name(a)]
+ for a in pci_dev_list])
+ for d in pci_dev_list:
+ __unbind_device(d)
+
+
+# we are intentionally not providing a "simple" function to bind a single
+# device due to complexities involved with using kernels < 3.15. instead, we're
+# allowing to call this function with either one PCI address or a list of PCI
+# addresses, or one DevInfo object, or a list of DevInfo objects, and will
+# automatically do cleanup even if we fail to bind some devices
+def bind(addrs, driver, force_unbind=False):
+ '''Bind device(s) to a specified driver'''
+ # build a list if we were not provided a list
+ pci_dev_list = []
+ try:
+ pci_dev_list.extend(addrs)
+ except AttributeError:
+ pci_dev_list.append(addrs)
+
+ # we want devices that aren't already bound to the driver we want, and are
+ # either not network devices, or aren't active network interfaces, unless we
+ # are in force-unbind mode
+ filter_func = (lambda d: d.active_driver != driver and
+ (d.devtype != DeviceType.DEVTYPE_NETWORK or
+ not d.active_interface or not force_unbind))
+ # ensure we are working with DevInfo instances, and filter them out
+ pci_dev_list = list(filter(filter_func,
+ [a if isinstance(a, DevInfo)
+ else get_devices()[get_device_name(a)]
+ for a in pci_dev_list]))
+ if len(pci_dev_list) == 0:
+ # nothing to be done, bail out
+ return
+ ex = None
+ try:
+ for dev in pci_dev_list:
+ old_driver = dev.active_driver
+ if dev.active_driver != "":
+ __unbind_device(dev)
+ __bind_device_to_driver(dev, driver)
+ except UnbindException as e:
+ # no need to roll back anything, but still stop
+ ex = e
+ except BindException as e:
+ # roll back changes, stop and raise later
+ dev.update()
+ if old_driver != dev.active_driver:
+ try:
+ __bind_device_to_driver(dev, old_driver)
+ except BindException:
+ # ignore this one, nothing we can do about it
+ pass
+ ex = e
+ finally:
+ # we need to do this regardless of whether we succeeded or failed
+
+ # For kernels < 3.15 when binding devices to a generic driver
+ # (i.e. one that doesn't have a PCI ID table) using new_id, some devices
+ # that are not bound to any other driver could be bound even if no one
+ # has asked them to. hence, we check the list of drivers again, and see
+ # if some of the previously-unbound devices were erroneously bound.
+ if not __have_override:
+ for dev in get_devices():
+ # skip devices that were already (or supposed to be) bound
+ if dev in pci_dev_list or dev.active_driver != "":
+ continue
+
+ # update information about this device
+ dev.update()
+
+ # check if updated information indicates the device was bound
+ if dev.active_driver != "":
+ try:
+ __unbind_device(dev)
+ except UnbindException as e:
+ # if we already had an exception previously, don't throw
+ # this one, because we have a higher-priority one that
+ # we haven't thrown yet
+ if ex is not None:
+ break
+ raise e
+ # if we've failed somewhere during the bind process, raise that
+ if ex is not None:
+ raise ex
+
+
+def get_device_name(name):
+ '''Take a device "name" - a string passed in by user to identify a NIC
+ device, and determine the device id - i.e. the domain:bus:slot.func - for
+ it, which can then be used to index into the devices array'''
+
+ # check if it's already a suitable index
+ if name in get_devices():
+ return name
+ # check if it's an index just missing the domain part
+ elif "0000:" + name in get_devices():
+ return "0000:" + name
+ else:
+ # check if it's an interface name, e.g. eth1
+ filter_func = (lambda i: i.devtype == DeviceType.DEVTYPE_NETWORK)
+ for dev in filter(filter_func, get_devices().values()):
+ if name in dev.interfaces:
+ return dev.pci_addr
+ return None
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
index 42434e728..eb21cce15 100755
--- a/usertools/DPDKConfigLib/Util.py
+++ b/usertools/DPDKConfigLib/Util.py
@@ -2,6 +2,25 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+# read entire file and return the result
+def read_file(path):
+ with open(path, 'r') as f:
+ result = f.read().strip()
+ return result
+
+
+# write value to file
+def write_file(path, value):
+ with open(path, 'w') as f:
+ f.write(value)
+
+
+# append value to file
+def append_file(path, value):
+ with open(path, 'a') as f:
+ f.write(value)
+
+
# split line into key-value pair, cleaning up the values in the process
def kv_split(line, separator):
# just in case
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 6/9] usertools/devbind: switch to using DPDKConfigLib
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (15 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 5/9] usertools/lib: add device information library Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 7/9] usertools/lib: add hugepage information library Anatoly Burakov
` (2 subsequent siblings)
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
Make devbind use DPDKConfigLib library instead of having its own
logic for binding/unbinding/enumerating devices and getting
device information.
All semantics and output are kept the same, only the internals
changed.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/dpdk-devbind.py | 533 ++++++--------------------------------
1 file changed, 74 insertions(+), 459 deletions(-)
diff --git a/usertools/dpdk-devbind.py b/usertools/dpdk-devbind.py
index 7d564634c..b1834c302 100755
--- a/usertools/dpdk-devbind.py
+++ b/usertools/dpdk-devbind.py
@@ -1,50 +1,18 @@
#! /usr/bin/env python
# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
+# Copyright(c) 2010-2018 Intel Corporation
#
+from DPDKConfigLib import DevInfo, DevUtil
import sys
-import os
import getopt
-import subprocess
-from os.path import exists, abspath, dirname, basename
-
-# The PCI base class for all devices
-network_class = {'Class': '02', 'Vendor': None, 'Device': None,
- 'SVendor': None, 'SDevice': None}
-encryption_class = {'Class': '10', 'Vendor': None, 'Device': None,
- 'SVendor': None, 'SDevice': None}
-intel_processor_class = {'Class': '0b', 'Vendor': '8086', 'Device': None,
- 'SVendor': None, 'SDevice': None}
-cavium_sso = {'Class': '08', 'Vendor': '177d', 'Device': 'a04b,a04d',
- 'SVendor': None, 'SDevice': None}
-cavium_fpa = {'Class': '08', 'Vendor': '177d', 'Device': 'a053',
- 'SVendor': None, 'SDevice': None}
-cavium_pkx = {'Class': '08', 'Vendor': '177d', 'Device': 'a0dd,a049',
- 'SVendor': None, 'SDevice': None}
-cavium_tim = {'Class': '08', 'Vendor': '177d', 'Device': 'a051',
- 'SVendor': None, 'SDevice': None}
-cavium_zip = {'Class': '12', 'Vendor': '177d', 'Device': 'a037',
- 'SVendor': None, 'SDevice': None}
-avp_vnic = {'Class': '05', 'Vendor': '1af4', 'Device': '1110',
- 'SVendor': None, 'SDevice': None}
-
-network_devices = [network_class, cavium_pkx, avp_vnic]
-crypto_devices = [encryption_class, intel_processor_class]
-eventdev_devices = [cavium_sso, cavium_tim]
-mempool_devices = [cavium_fpa]
-compress_devices = [cavium_zip]
-
-# global dict ethernet devices present. Dictionary indexed by PCI address.
-# Each device within this is itself a dictionary of device properties
-devices = {}
-# list of supported DPDK drivers
-dpdk_drivers = ["igb_uio", "vfio-pci", "uio_pci_generic"]
+from os.path import basename
# command-line arg flags
b_flag = None
status_flag = False
force_flag = False
+status_dev = ""
args = []
@@ -119,394 +87,43 @@ def usage():
""" % locals()) # replace items from local variables
-# This is roughly compatible with check_output function in subprocess module
-# which is only available in python 2.7.
-def check_output(args, stderr=None):
- '''Run a command and capture its output'''
- return subprocess.Popen(args, stdout=subprocess.PIPE,
- stderr=stderr).communicate()[0]
-
-
def check_modules():
'''Checks that igb_uio is loaded'''
- global dpdk_drivers
+ loaded_drivers = DevUtil.get_loaded_dpdk_drivers()
+ supported_drivers = DevUtil.get_supported_dpdk_drivers()
- # list of supported modules
- mods = [{"Name": driver, "Found": False} for driver in dpdk_drivers]
-
- # first check if module is loaded
- try:
- # Get list of sysfs modules (both built-in and dynamically loaded)
- sysfs_path = '/sys/module/'
-
- # Get the list of directories in sysfs_path
- sysfs_mods = [os.path.join(sysfs_path, o) for o
- in os.listdir(sysfs_path)
- if os.path.isdir(os.path.join(sysfs_path, o))]
-
- # Extract the last element of '/sys/module/abc' in the array
- sysfs_mods = [a.split('/')[-1] for a in sysfs_mods]
-
- # special case for vfio_pci (module is named vfio-pci,
- # but its .ko is named vfio_pci)
- sysfs_mods = [a if a != 'vfio_pci' else 'vfio-pci' for a in sysfs_mods]
-
- for mod in mods:
- if mod["Name"] in sysfs_mods:
- mod["Found"] = True
- except:
- pass
+ if b_flag in supported_drivers and b_flag not in loaded_drivers:
+ print("Error - %s driver is not loaded" % b_flag)
+ sys.exit(1)
# check if we have at least one loaded module
- if True not in [mod["Found"] for mod in mods] and b_flag is not None:
- if b_flag in dpdk_drivers:
- print("Error - no supported modules(DPDK driver) are loaded")
- sys.exit(1)
- else:
- print("Warning - no supported modules(DPDK driver) are loaded")
-
- # change DPDK driver list to only contain drivers that are loaded
- dpdk_drivers = [mod["Name"] for mod in mods if mod["Found"]]
-
-
-def has_driver(dev_id):
- '''return true if a device is assigned to a driver. False otherwise'''
- return "Driver_str" in devices[dev_id]
-
-
-def get_pci_device_details(dev_id, probe_lspci):
- '''This function gets additional details for a PCI device'''
- device = {}
-
- if probe_lspci:
- extra_info = check_output(["lspci", "-vmmks", dev_id]).splitlines()
-
- # parse lspci details
- for line in extra_info:
- if len(line) == 0:
- continue
- name, value = line.decode().split("\t", 1)
- name = name.strip(":") + "_str"
- device[name] = value
- # check for a unix interface name
- device["Interface"] = ""
- for base, dirs, _ in os.walk("/sys/bus/pci/devices/%s/" % dev_id):
- if "net" in dirs:
- device["Interface"] = \
- ",".join(os.listdir(os.path.join(base, "net")))
- break
- # check if a port is used for ssh connection
- device["Ssh_if"] = False
- device["Active"] = ""
-
- return device
-
-def clear_data():
- '''This function clears any old data'''
- devices = {}
-
-def get_device_details(devices_type):
- '''This function populates the "devices" dictionary. The keys used are
- the pci addresses (domain:bus:slot.func). The values are themselves
- dictionaries - one for each NIC.'''
- global devices
- global dpdk_drivers
-
- # first loop through and read details for all devices
- # request machine readable format, with numeric IDs and String
- dev = {}
- dev_lines = check_output(["lspci", "-Dvmmnnk"]).splitlines()
- for dev_line in dev_lines:
- if len(dev_line) == 0:
- if device_type_match(dev, devices_type):
- # Replace "Driver" with "Driver_str" to have consistency of
- # of dictionary key names
- if "Driver" in dev.keys():
- dev["Driver_str"] = dev.pop("Driver")
- if "Module" in dev.keys():
- dev["Module_str"] = dev.pop("Module")
- # use dict to make copy of dev
- devices[dev["Slot"]] = dict(dev)
- # Clear previous device's data
- dev = {}
- else:
- name, value = dev_line.decode().split("\t", 1)
- value_list = value.rsplit(' ', 1)
- if len(value_list) > 1:
- # String stored in <name>_str
- dev[name.rstrip(":") + '_str'] = value_list[0]
- # Numeric IDs
- dev[name.rstrip(":")] = value_list[len(value_list) - 1] \
- .rstrip("]").lstrip("[")
-
- if devices_type == network_devices:
- # check what is the interface if any for an ssh connection if
- # any to this host, so we can mark it later.
- ssh_if = []
- route = check_output(["ip", "-o", "route"])
- # filter out all lines for 169.254 routes
- route = "\n".join(filter(lambda ln: not ln.startswith("169.254"),
- route.decode().splitlines()))
- rt_info = route.split()
- for i in range(len(rt_info) - 1):
- if rt_info[i] == "dev":
- ssh_if.append(rt_info[i+1])
-
- # based on the basic info, get extended text details
- for d in devices.keys():
- if not device_type_match(devices[d], devices_type):
- continue
-
- # get additional info and add it to existing data
- devices[d] = devices[d].copy()
- # No need to probe lspci
- devices[d].update(get_pci_device_details(d, False).items())
-
- if devices_type == network_devices:
- for _if in ssh_if:
- if _if in devices[d]["Interface"].split(","):
- devices[d]["Ssh_if"] = True
- devices[d]["Active"] = "*Active*"
- break
-
- # add igb_uio to list of supporting modules if needed
- if "Module_str" in devices[d]:
- for driver in dpdk_drivers:
- if driver not in devices[d]["Module_str"]:
- devices[d]["Module_str"] = \
- devices[d]["Module_str"] + ",%s" % driver
- else:
- devices[d]["Module_str"] = ",".join(dpdk_drivers)
-
- # make sure the driver and module strings do not have any duplicates
- if has_driver(d):
- modules = devices[d]["Module_str"].split(",")
- if devices[d]["Driver_str"] in modules:
- modules.remove(devices[d]["Driver_str"])
- devices[d]["Module_str"] = ",".join(modules)
-
-
-def device_type_match(dev, devices_type):
- for i in range(len(devices_type)):
- param_count = len(
- [x for x in devices_type[i].values() if x is not None])
- match_count = 0
- if dev["Class"][0:2] == devices_type[i]["Class"]:
- match_count = match_count + 1
- for key in devices_type[i].keys():
- if key != 'Class' and devices_type[i][key]:
- value_list = devices_type[i][key].split(',')
- for value in value_list:
- if value.strip(' ') == dev[key]:
- match_count = match_count + 1
- # count must be the number of non None parameters to match
- if match_count == param_count:
- return True
- return False
-
-def dev_id_from_dev_name(dev_name):
- '''Take a device "name" - a string passed in by user to identify a NIC
- device, and determine the device id - i.e. the domain:bus:slot.func - for
- it, which can then be used to index into the devices array'''
-
- # check if it's already a suitable index
- if dev_name in devices:
- return dev_name
- # check if it's an index just missing the domain part
- elif "0000:" + dev_name in devices:
- return "0000:" + dev_name
- else:
- # check if it's an interface name, e.g. eth1
- for d in devices.keys():
- if dev_name in devices[d]["Interface"].split(","):
- return devices[d]["Slot"]
- # if nothing else matches - error
- print("Unknown device: %s. "
- "Please specify device in \"bus:slot.func\" format" % dev_name)
- sys.exit(1)
-
-
-def unbind_one(dev_id, force):
- '''Unbind the device identified by "dev_id" from its current driver'''
- dev = devices[dev_id]
- if not has_driver(dev_id):
- print("%s %s %s is not currently managed by any driver\n" %
- (dev["Slot"], dev["Device_str"], dev["Interface"]))
- return
-
- # prevent us disconnecting ourselves
- if dev["Ssh_if"] and not force:
- print("Routing table indicates that interface %s is active. "
- "Skipping unbind" % (dev_id))
- return
-
- # write to /sys to unbind
- filename = "/sys/bus/pci/drivers/%s/unbind" % dev["Driver_str"]
- try:
- f = open(filename, "a")
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
- f.write(dev_id)
- f.close()
-
-
-def bind_one(dev_id, driver, force):
- '''Bind the device given by "dev_id" to the driver "driver". If the device
- is already bound to a different driver, it will be unbound first'''
- dev = devices[dev_id]
- saved_driver = None # used to rollback any unbind in case of failure
-
- # prevent disconnection of our ssh session
- if dev["Ssh_if"] and not force:
- print("Routing table indicates that interface %s is active. "
- "Not modifying" % (dev_id))
- return
-
- # unbind any existing drivers we don't want
- if has_driver(dev_id):
- if dev["Driver_str"] == driver:
- print("%s already bound to driver %s, skipping\n"
- % (dev_id, driver))
- return
- else:
- saved_driver = dev["Driver_str"]
- unbind_one(dev_id, force)
- dev["Driver_str"] = "" # clear driver string
-
- # For kernels >= 3.15 driver_override can be used to specify the driver
- # for a device rather than relying on the driver to provide a positive
- # match of the device. The existing process of looking up
- # the vendor and device ID, adding them to the driver new_id,
- # will erroneously bind other devices too which has the additional burden
- # of unbinding those devices
- if driver in dpdk_drivers:
- filename = "/sys/bus/pci/devices/%s/driver_override" % dev_id
- if os.path.exists(filename):
- try:
- f = open(filename, "w")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- return
- try:
- f.write("%s" % driver)
- f.close()
- except:
- print("Error: bind failed for %s - Cannot write driver %s to "
- "PCI ID " % (dev_id, driver))
- return
- # For kernels < 3.15 use new_id to add PCI id's to the driver
- else:
- filename = "/sys/bus/pci/drivers/%s/new_id" % driver
- try:
- f = open(filename, "w")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- return
- try:
- # Convert Device and Vendor Id to int to write to new_id
- f.write("%04x %04x" % (int(dev["Vendor"],16),
- int(dev["Device"], 16)))
- f.close()
- except:
- print("Error: bind failed for %s - Cannot write new PCI ID to "
- "driver %s" % (dev_id, driver))
- return
-
- # do the bind by writing to /sys
- filename = "/sys/bus/pci/drivers/%s/bind" % driver
- try:
- f = open(filename, "a")
- except:
- print("Error: bind failed for %s - Cannot open %s"
- % (dev_id, filename))
- if saved_driver is not None: # restore any previous driver
- bind_one(dev_id, saved_driver, force)
- return
- try:
- f.write(dev_id)
- f.close()
- except:
- # for some reason, closing dev_id after adding a new PCI ID to new_id
- # results in IOError. however, if the device was successfully bound,
- # we don't care for any errors and can safely ignore IOError
- tmp = get_pci_device_details(dev_id, True)
- if "Driver_str" in tmp and tmp["Driver_str"] == driver:
- return
- print("Error: bind failed for %s - Cannot bind to driver %s"
- % (dev_id, driver))
- if saved_driver is not None: # restore any previous driver
- bind_one(dev_id, saved_driver, force)
- return
-
- # For kernels > 3.15 driver_override is used to bind a device to a driver.
- # Before unbinding it, overwrite driver_override with empty string so that
- # the device can be bound to any other driver
- filename = "/sys/bus/pci/devices/%s/driver_override" % dev_id
- if os.path.exists(filename):
- try:
- f = open(filename, "w")
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
- try:
- f.write("\00")
- f.close()
- except:
- print("Error: unbind failed for %s - Cannot open %s"
- % (dev_id, filename))
- sys.exit(1)
+ if len(loaded_drivers) == 0:
+ print("Warning - no supported modules(DPDK driver) are loaded")
def unbind_all(dev_list, force=False):
"""Unbind method, takes a list of device locations"""
-
- if dev_list[0] == "dpdk":
- for d in devices.keys():
- if "Driver_str" in devices[d]:
- if devices[d]["Driver_str"] in dpdk_drivers:
- unbind_one(devices[d]["Slot"], force)
- return
-
- dev_list = map(dev_id_from_dev_name, dev_list)
- for d in dev_list:
- unbind_one(d, force)
+ try:
+ DevUtil.unbind(dev_list, force)
+ except DevUtil.UnbindException as e:
+ print("Unbind failed: %s" % e)
+ sys.exit(1)
def bind_all(dev_list, driver, force=False):
"""Bind method, takes a list of device locations"""
- global devices
- dev_list = map(dev_id_from_dev_name, dev_list)
+ try:
+ DevUtil.bind(dev_list, driver, force)
+ except DevUtil.BindException as e:
+ print("Bind failed: %s" % e)
+ sys.exit(1)
+ except DevUtil.UnbindException as e:
+ print("Bind failed: %s" % e)
+ sys.exit(1)
- for d in dev_list:
- bind_one(d, driver, force)
- # For kernels < 3.15 when binding devices to a generic driver
- # (i.e. one that doesn't have a PCI ID table) using new_id, some devices
- # that are not bound to any other driver could be bound even if no one has
- # asked them to. hence, we check the list of drivers again, and see if
- # some of the previously-unbound devices were erroneously bound.
- if not os.path.exists("/sys/bus/pci/devices/%s/driver_override" % d):
- for d in devices.keys():
- # skip devices that were already bound or that we know should be bound
- if "Driver_str" in devices[d] or d in dev_list:
- continue
-
- # update information about this device
- devices[d] = dict(devices[d].items() +
- get_pci_device_details(d, True).items())
-
- # check if updated information indicates that the device was bound
- if "Driver_str" in devices[d]:
- unbind_one(d, force)
-
-
-def display_devices(title, dev_list, extra_params=None):
+def display_devices(title, dev_list):
'''Displays to the user the details of a list of devices given in
"dev_list". The "extra_params" parameter, if given, should contain a string
with %()s fields in it for replacement by the named fields in each
@@ -518,62 +135,74 @@ def display_devices(title, dev_list, extra_params=None):
strings.append("<none>")
else:
for dev in dev_list:
- if extra_params is not None:
- strings.append("%s '%s %s' %s" % (dev["Slot"],
- dev["Device_str"],
- dev["Device"],
- extra_params % dev))
+ if dev.devtype == DevInfo.DeviceType.DEVTYPE_NETWORK:
+ extra_str = "if=%s drv=%s unused=%s%s" % \
+ (",".join(dev.interfaces), dev.active_driver,
+ ",".join(dev.available_drivers),
+ " *Active*" if dev.active_interface else "")
else:
- strings.append("%s '%s'" % (dev["Slot"], dev["Device_str"]))
+ extra_str = "drv=%s unused=%s" % \
+ (dev.active_driver, ",".join(dev.available_drivers))
+ strings.append("%s '%s %s' %s" % (dev.pci_addr,
+ dev.device_name,
+ dev.device_id,
+ extra_str))
# sort before printing, so that the entries appear in PCI order
strings.sort()
print("\n".join(strings)) # print one per line
-def show_device_status(devices_type, device_name):
- global dpdk_drivers
+
+def show_device_status(device_list, device_type):
kernel_drv = []
dpdk_drv = []
no_drv = []
+ typenames = {
+ DevInfo.DeviceType.DEVTYPE_NETWORK: "Network",
+ DevInfo.DeviceType.DEVTYPE_CRYPTO: "Crypto",
+ DevInfo.DeviceType.DEVTYPE_EVENT: "Event",
+ DevInfo.DeviceType.DEVTYPE_MEMPOOL: "Mempool",
+ DevInfo.DeviceType.DEVTYPE_COMPRESS: "Compress"
+ }
+ typename = typenames[device_type]
+
# split our list of network devices into the three categories above
- for d in devices.keys():
- if device_type_match(devices[d], devices_type):
- if not has_driver(d):
- no_drv.append(devices[d])
- continue
- if devices[d]["Driver_str"] in dpdk_drivers:
- dpdk_drv.append(devices[d])
+ for d in device_list:
+ if d.devtype == device_type:
+ if d.active_driver == "":
+ no_drv.append(d)
+ elif d.active_driver in DevInfo.get_loaded_dpdk_drivers():
+ dpdk_drv.append(d)
else:
- kernel_drv.append(devices[d])
+ kernel_drv.append(d)
# print each category separately, so we can clearly see what's used by DPDK
- display_devices("%s devices using DPDK-compatible driver" % device_name,
- dpdk_drv, "drv=%(Driver_str)s unused=%(Module_str)s")
- display_devices("%s devices using kernel driver" % device_name, kernel_drv,
- "if=%(Interface)s drv=%(Driver_str)s "
- "unused=%(Module_str)s %(Active)s")
- display_devices("Other %s devices" % device_name, no_drv,
- "unused=%(Module_str)s")
+ display_devices("%s devices using DPDK-compatible driver" % typename,
+ dpdk_drv)
+ display_devices("%s devices using kernel driver" % typename, kernel_drv)
+ display_devices("Other %s devices" % typename, no_drv)
+
def show_status():
'''Function called when the script is passed the "--status" option.
Displays to the user what devices are bound to the igb_uio driver, the
kernel driver or to no driver'''
- if status_dev == "net" or status_dev == "all":
- show_device_status(network_devices, "Network")
-
- if status_dev == "crypto" or status_dev == "all":
- show_device_status(crypto_devices, "Crypto")
-
- if status_dev == "event" or status_dev == "all":
- show_device_status(eventdev_devices, "Eventdev")
-
- if status_dev == "mempool" or status_dev == "all":
- show_device_status(mempool_devices, "Mempool")
-
- if status_dev == "compress" or status_dev == "all":
- show_device_status(compress_devices , "Compress")
+ devtypes = {
+ "net": DevInfo.DeviceType.DEVTYPE_NETWORK,
+ "crypto": DevInfo.DeviceType.DEVTYPE_CRYPTO,
+ "event": DevInfo.DeviceType.DEVTYPE_EVENT,
+ "mempool": DevInfo.DeviceType.DEVTYPE_MEMPOOL,
+ "compress": DevInfo.DeviceType.DEVTYPE_COMPRESS
+ }
+ device_list = DevInfo.get_devices().values()
+
+ found_types = sorted([devtypes[t] for t in devtypes.keys()
+ if t == status_dev or status_dev == "all"])
+
+ for t in found_types:
+ devices = list(filter(lambda dev: dev.devtype == t, device_list))
+ show_device_status(devices, t)
def parse_args():
@@ -642,14 +271,6 @@ def do_arg_actions():
elif b_flag is not None:
bind_all(args, b_flag, force_flag)
if status_flag:
- if b_flag is not None:
- clear_data()
- # refresh if we have changed anything
- get_device_details(network_devices)
- get_device_details(crypto_devices)
- get_device_details(eventdev_devices)
- get_device_details(mempool_devices)
- get_device_details(compress_devices)
show_status()
@@ -657,12 +278,6 @@ def main():
'''program main function'''
parse_args()
check_modules()
- clear_data()
- get_device_details(network_devices)
- get_device_details(crypto_devices)
- get_device_details(eventdev_devices)
- get_device_details(mempool_devices)
- get_device_details(compress_devices)
do_arg_actions()
if __name__ == "__main__":
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 7/9] usertools/lib: add hugepage information library
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (16 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 8/9] usertools: add hugepage info script Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
Add a library for getting hugepage information on Linux system.
Supported functionality:
- List active hugetlbfs mountpoints
- Change hugetlbfs mountpoints
- Supports both transient and persistent (fstab) mountpoints
- Display/change number of allocated hugepages
- Supports both total and per-NUMA node page counts
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/HugeUtil.py | 309 ++++++++++++++++++++++++++++
usertools/DPDKConfigLib/Util.py | 49 +++++
2 files changed, 358 insertions(+)
create mode 100755 usertools/DPDKConfigLib/HugeUtil.py
diff --git a/usertools/DPDKConfigLib/HugeUtil.py b/usertools/DPDKConfigLib/HugeUtil.py
new file mode 100755
index 000000000..79ed97bb7
--- /dev/null
+++ b/usertools/DPDKConfigLib/HugeUtil.py
@@ -0,0 +1,309 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .PlatformInfo import *
+from .Util import *
+import re
+import os
+import subprocess
+
+__KERNEL_NUMA_HP_PATH = \
+ "/sys/devices/system/node/node%i/hugepages/hugepages-%ikB/"
+__KERNEL_HP_PATH = "/sys/kernel/mm/hugepages/hugepages-%ikB/"
+__NR_HP_FNAME = "nr_hugepages"
+# check if we have systemd
+_have_systemd = run(["which", "systemctl"])
+
+# local copy of platform info
+info = PlatformInfo()
+
+
+def _find_runtime_hugetlbfs_mountpoints():
+ mountpoints = {}
+ with open("/proc/mounts") as f:
+ for line in f:
+ if not _is_hugetlbfs_mount(line):
+ continue
+ line = line.strip()
+ _, path, _, options, _, _ = line.split()
+
+ m = re.search(r"pagesize=(\d+\w)", options)
+ if m:
+ pagesz = human_readable_to_kilobytes(m.group(1))
+ else:
+ # if no size specified, assume default hugepage size
+ pagesz = info.default_hugepage_size
+ if pagesz in mountpoints:
+ raise RuntimeError("Multiple mountpoints for same hugetlbfs")
+ mountpoints[pagesz] = path
+ return mountpoints
+
+
+def _find_nr_hugepages(page_sz, node=None):
+ if node is not None:
+ path = os.path.join(__KERNEL_NUMA_HP_PATH % (node, page_sz),
+ __NR_HP_FNAME)
+ else:
+ path = os.path.join(__KERNEL_HP_PATH % (page_sz), __NR_HP_FNAME)
+ return int(read_file(path))
+
+
+def _write_nr_hugepages(page_sz, nr_pages, node=None):
+ if node is not None:
+ path = os.path.join(__KERNEL_NUMA_HP_PATH % (node, page_sz),
+ __NR_HP_FNAME)
+ else:
+ path = os.path.join(__KERNEL_HP_PATH % (page_sz), __NR_HP_FNAME)
+ write_file(path, str(nr_pages))
+
+
+def _is_hugetlbfs_mount(line):
+ # ignore comemnts
+ if line.strip().startswith("#"):
+ return False
+ tokens = line.split()
+ if len(tokens) != 6:
+ return False
+ return tokens[2] == "hugetlbfs"
+
+
+def _update_fstab_hugetlbfs_mounts(mountpoints):
+ # remove all hugetlbfs mappings
+ with open("/etc/fstab") as f:
+ lines = f.readlines()
+ mount_idxs = [idx for idx, line in enumerate(lines)
+ if _is_hugetlbfs_mount(line)]
+
+ # delete all lines with hugetlbfs mountpoints
+ for idx in reversed(sorted(mount_idxs)):
+ del lines[idx]
+
+ # append new mountpoints
+ lines.extend(["hugetlbfs %s hugetlbfs pagesize=%s 0 0\n" %
+ (mountpoints[size], kilobytes_to_human_readable(size))
+ for size in mountpoints.keys() if mountpoints[size] != ""])
+
+ # finally, write everything back
+ with open("/etc/fstab", "w") as f:
+ f.writelines(lines)
+
+
+def _find_fstab_hugetlbfs_mounts():
+ mountpoints = {}
+ with open("/etc/fstab") as f:
+ for line in f:
+ if not _is_hugetlbfs_mount(line):
+ continue
+ line = line.strip()
+ _, path, _, options, _, _ = line.split()
+
+ m = re.search(r"pagesize=(\d+\w)", options)
+ if m:
+ pagesz = human_readable_to_kilobytes(m.group(1))
+ else:
+ # if no size specified, assume default hugepage size
+ pagesz = info.default_hugepage_size
+ if pagesz in mountpoints:
+ raise RuntimeError("Multiple mountpoints for same hugetlbfs")
+ mountpoints[pagesz] = path
+ return mountpoints
+
+
+def _find_systemd_hugetlbfs_mounts():
+ # we find systemd mounts by virtue of them not being in fstab, so check each
+ units = []
+ out = subprocess.check_output(["systemctl", "-t", "mount", "--all"],
+ stderr=None)
+ lines = out.decode("utf-8").splitlines()
+ for line in lines:
+ line = line.strip()
+
+ tokens = line.split()
+
+ if len(tokens) == 0:
+ continue
+
+ # masked unit files are second token
+ if tokens[0].endswith(".mount"):
+ unit = tokens[0]
+ elif tokens[1].endswith(".mount"):
+ tokens = tokens[1:]
+ unit = tokens[0]
+ else:
+ continue # not a unit line
+
+ # if this is inactive and masked, we don't care
+ load, active, sub = tokens[1:4]
+ if load == "masked" and active == "inactive":
+ continue
+
+ units.append({"unit": unit, "load": load, "active": active, "sub": sub})
+
+ for unit_dict in units:
+ # status may return non-zero, but we don't care
+ try:
+ out = subprocess.check_output(["systemctl", "status",
+ unit_dict["unit"]], stderr=None)
+ except subprocess.CalledProcessError as e:
+ out = e.output
+ lines = out.decode("utf-8").splitlines()
+ for line in lines:
+ line = line.strip()
+ if line.startswith("What"):
+ unit_dict["fs"] = line.split()[1]
+ elif line.startswith("Where"):
+ unit_dict["path"] = line.split()[1]
+
+ fstab_mountpoints = _find_fstab_hugetlbfs_mounts().values()
+ filter_func = (lambda x: x.get("fs", "") == "hugetlbfs" and
+ x.get("path", "") not in fstab_mountpoints)
+ return {u["unit"]: u["path"] for u in filter(filter_func, units)}
+
+
+def _disable_systemd_hugetlbfs_mounts():
+ mounts = _find_systemd_hugetlbfs_mounts()
+ for unit, path in mounts.keys():
+ run(["systemctl", "stop", unit]) # unmount
+ run(["systemctl", "mask", unit]) # prevent this from ever running
+
+
+class PersistentMountpointConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+ self.mountpoints = _find_fstab_hugetlbfs_mounts()
+ for sz in info.hugepage_sizes_enabled:
+ self.mountpoints.setdefault(sz, "")
+
+ def commit(self):
+ # check if we are trying to mount hugetlbfs of unsupported size
+ supported = set(info.hugepage_sizes_supported)
+ all_sizes = set(self.mountpoints.keys())
+ if not all_sizes.issubset(supported):
+ diff = supported.difference(all_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ if _have_systemd:
+ # dealing with fstab is easier, so disable all systemd mounts
+ _disable_systemd_hugetlbfs_mounts()
+
+ _update_fstab_hugetlbfs_mounts(self.mountpoints)
+
+ if _have_systemd:
+ run(["systemctl", "daemon-reload"])
+ self.update()
+
+ def reset(self):
+ self.mountpoints = {} # pagesz : path
+
+
+class RuntimeMountpointConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+ self.mountpoints = _find_runtime_hugetlbfs_mountpoints()
+ for sz in info.hugepage_sizes_enabled:
+ self.mountpoints.setdefault(sz, "")
+
+ def commit(self):
+ # check if we are trying to mount hugetlbfs of unsupported size
+ supported = set(info.hugepage_sizes_supported)
+ all_sizes = set(self.mountpoints.keys())
+ if not all_sizes.issubset(supported):
+ diff = supported.difference(all_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ cur_mp = _find_runtime_hugetlbfs_mountpoints()
+ sizes = set(cur_mp.keys()).union(self.mountpoints.keys())
+
+ for size in sizes:
+ old = cur_mp.get(size, "")
+ new = self.mountpoints.get(size, "")
+
+ is_unmount = old != "" and new == ""
+ is_mount = old == "" and new != ""
+ is_remount = old != "" and new != "" and old != new
+
+ mount_param = ["-t", "hugetlbfs", "-o",
+ "pagesize=%sM" % (size / 1024)]
+
+ if is_unmount:
+ run(["umount", old])
+ elif is_mount:
+ mkpath(new)
+ run(["mount"] + mount_param + [new])
+ elif is_remount:
+ mkpath(new)
+ run(["umount", old])
+ run(["mount"] + mount_param + [new])
+
+ if _have_systemd:
+ run(["systemctl", "daemon-reload"])
+ self.update()
+
+ def reset(self):
+ self.mountpoints = {} # pagesz : path
+
+
+class RuntimeHugepageConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+
+ hugepage_sizes = info.hugepage_sizes_enabled
+ if len(hugepage_sizes) == 0:
+ raise RuntimeError("Hugepages appear to be disabled")
+ self.total_nr_hugepages = \
+ {page_sz: _find_nr_hugepages(page_sz)
+ for page_sz in hugepage_sizes}
+ for node in info.numa_nodes:
+ for page_sz in hugepage_sizes:
+ self.hugepages_per_node[node, page_sz] = \
+ _find_nr_hugepages(page_sz, node)
+
+ def commit(self):
+ # sanity checks
+
+ # check if user has messed with hugepage sizes
+ supported_sizes = set(info.hugepage_sizes_supported)
+ keys = self.total_nr_hugepages.keys()
+ if set(keys) != set(supported_sizes):
+ diff = supported_sizes.difference(keys)
+ raise ValueError("Missing hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ for d in self.hugepages_per_node:
+ keys = d.keys()
+ if set(keys) != set(supported_sizes):
+ diff = supported_sizes.difference(keys)
+ raise ValueError("Missing hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ # check if all hugepage numbers add up
+ for size in supported_sizes:
+ total_hps = sum([self.hugepages_per_node[node, size]
+ for node in info.numa_nodes])
+ if total_hps != self.total_nr_hugepages[size]:
+ raise ValueError("Total number of hugepages not equal to sum of"
+ "pages on all NUMA nodes")
+
+ # now, commit our configuration
+ for size, value in self.total_nr_hugepages.items():
+ _write_nr_hugepages(size, value)
+ for node, size, value in self.hugepages_per_node.items():
+ _write_nr_hugepages(size, value, node)
+ self.update()
+
+ def reset(self):
+ self.total_nr_hugepages = {}
+ self.hugepages_per_node = {}
diff --git a/usertools/DPDKConfigLib/Util.py b/usertools/DPDKConfigLib/Util.py
index eb21cce15..ba0c36537 100755
--- a/usertools/DPDKConfigLib/Util.py
+++ b/usertools/DPDKConfigLib/Util.py
@@ -2,6 +2,25 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2018 Intel Corporation
+import subprocess
+import re
+import os
+import errno
+
+__PGSZ_UNITS = ['k', 'M', 'G', 'T', 'P']
+
+
+# equivalent to mkdir -p
+def mkpath(path):
+ try:
+ os.makedirs(path)
+ except OSError as e:
+ if e.errno == errno.EEXIST:
+ pass
+ else:
+ raise e
+
+
# read entire file and return the result
def read_file(path):
with open(path, 'r') as f:
@@ -21,6 +40,36 @@ def append_file(path, value):
f.write(value)
+# run command while suppressing its output
+def run(args):
+ try:
+ subprocess.check_output(args, stderr=None)
+ except subprocess.CalledProcessError:
+ return False
+ return True
+
+
+def kilobytes_to_human_readable(value):
+ for unit in __PGSZ_UNITS:
+ if abs(value) < 1024:
+ cur_unit = unit
+ break
+ value /= 1024
+ else:
+ raise ValueError("Value too large")
+ return "%i%s" % (value, cur_unit)
+
+
+def human_readable_to_kilobytes(value):
+ m = re.match(r"(\d+)([%s])$" % ''.join(__PGSZ_UNITS), value)
+ if not m:
+ raise ValueError("Invalid value format: %s" % value)
+ ival = int(m.group(1))
+ suffix = m.group(2)
+ pow = __PGSZ_UNITS.index(suffix)
+ return ival * (1024 ** pow)
+
+
# split line into key-value pair, cleaning up the values in the process
def kv_split(line, separator):
# just in case
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 8/9] usertools: add hugepage info script
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (17 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 7/9] usertools/lib: add hugepage information library Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
Add a simple hugepage info script for demonstration purposes.
It lists the following information:
- Currently configured persistent hugetlbfs mountpoints (fstab)
- Currently mounted hugetlbfs mountpoints
- Total number of hugepages for each size
- Per-NUMA node number of hugepages for each size
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/hugepage-info.py | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100755 usertools/hugepage-info.py
diff --git a/usertools/hugepage-info.py b/usertools/hugepage-info.py
new file mode 100755
index 000000000..bbea35e7b
--- /dev/null
+++ b/usertools/hugepage-info.py
@@ -0,0 +1,32 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from __future__ import print_function
+from DPDKConfigLib import HugeUtil, PlatformInfo, Util
+
+pc = HugeUtil.PersistentMountpointConfig()
+print("Persistent hugetlbfs mountpoints:")
+
+for sz, mp in pc.mountpoints.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), mp))
+
+rc = HugeUtil.RuntimeMountpointConfig()
+print("Current hugetlbfs mountpoints:")
+
+for sz, mp in rc.mountpoints.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), mp))
+
+info = PlatformInfo.PlatformInfo()
+rhc = HugeUtil.RuntimeHugepageConfig()
+print("Current hugepage configuration:")
+for sz, nr in rhc.total_nr_hugepages.items():
+ print("%s: %s" % (Util.kilobytes_to_human_readable(sz), nr))
+
+print("Current per-NUMA node configuration:")
+for node in info.numa_nodes:
+ for pagesz in info.hugepage_sizes_supported:
+ print("[Node %s] %s: %s" % (node,
+ Util.kilobytes_to_human_readable(pagesz),
+ rhc.hugepages_per_node[node, pagesz]))
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* [dpdk-dev] [RFC v2 9/9] usertools/lib: add GRUB utility library for hugepage config
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
` (18 preceding siblings ...)
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 8/9] usertools: add hugepage info script Anatoly Burakov
@ 2018-11-15 15:47 ` Anatoly Burakov
19 siblings, 0 replies; 36+ messages in thread
From: Anatoly Burakov @ 2018-11-15 15:47 UTC (permalink / raw)
To: dev
Cc: john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
This library is highly experimental and can kill kittens, but its
main purpose is to automatically set up GRUB command-line to
allocate a given number of hugepages at boot time. It works in
a similar way HugeUtil library does, but instead of committing
changes to fstab or runtime configuration, it commits its
changes to GRUB default command-line and updates all GRUB entries
afterwards. I got it to a state where it's safe to use on my
system, but see the part above about killing kittens - you have
been warned :)
No example scripts will currently be provided.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
usertools/DPDKConfigLib/GrubHugeUtil.py | 175 ++++++++++++++++++++++++
1 file changed, 175 insertions(+)
create mode 100755 usertools/DPDKConfigLib/GrubHugeUtil.py
diff --git a/usertools/DPDKConfigLib/GrubHugeUtil.py b/usertools/DPDKConfigLib/GrubHugeUtil.py
new file mode 100755
index 000000000..4b8e349b8
--- /dev/null
+++ b/usertools/DPDKConfigLib/GrubHugeUtil.py
@@ -0,0 +1,175 @@
+#!/usr/bin/env python
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+
+from .PlatformInfo import *
+from .Util import *
+import re
+import os
+
+__KERNEL_TRANSPARENT_HP = "/sys/kernel/mm/transparent_hugepage/enabled"
+_GRUB_CMDLINE_PARAM_NAME = "GRUB_CMDLINE_LINUX_DEFAULT"
+
+# local copy of platform info
+info = PlatformInfo()
+
+def _find_linux_default_cmdline():
+ with open("/etc/default/grub") as f:
+ for line in f:
+ line = line.strip()
+ if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
+ return line
+ else:
+ raise RuntimeError("Invalid GRUB default configuration format")
+
+
+def _parse_linux_default_cmdline(line):
+ # get value to the right of equals sign, strip whitespace and quotes,
+ # split into separate keys and make a list of values
+ _, cmdline = kv_split(line, "=")
+ # remove quotes
+ if cmdline[0] == cmdline[-1] == '"':
+ cmdline = cmdline[1:-1]
+
+ return [kv_split(v, "=") for v in cmdline.split()]
+
+
+def _generate_linux_default_cmdline(cmdline):
+ lines = []
+ cmdline_idx = -1
+ with open("/etc/default/grub") as f:
+ for idx, line in enumerate(f):
+ line = line.strip()
+ lines.extend([line])
+ if line.startswith(_GRUB_CMDLINE_PARAM_NAME):
+ cmdline_idx = idx
+ if cmdline_idx == -1:
+ raise RuntimeError("Invalid GRUB default configuration format")
+
+ # write the lines back, replacing one we want
+ with open("/etc/default/grub", "w") as f:
+ for idx, line in enumerate(lines):
+ if idx == cmdline_idx:
+ line = cmdline
+ f.write(line + "\n")
+
+
+def _find_transparent_hugepage():
+ if not os.path.exists(__KERNEL_TRANSPARENT_HP):
+ return None
+ value = read_file(__KERNEL_TRANSPARENT_HP)
+ m = re.search(r"\[([a-z]+)\]", value)
+ if not m:
+ raise RuntimeError("BUG: Bad regular expression")
+ return m.group(1)
+
+
+class GrubHugepageConfig:
+ def __init__(self):
+ self.update()
+
+ def update(self):
+ self.reset()
+
+ hugepage_sizes = info.hugepage_sizes_supported
+ if len(hugepage_sizes) == 0:
+ raise RuntimeError("Hugepages appear to be unsupported")
+ cmdline = _find_linux_default_cmdline()
+ values = _parse_linux_default_cmdline(cmdline)
+
+ # parse values in the list
+ self.default_hugepagesz = info.default_hugepage_size
+ self.transparent_hugepage = _find_transparent_hugepage()
+ sizes = []
+ nrs = []
+ for k, v in values:
+ if k == "default_hugepagesz":
+ self.default_hugepagesz = human_readable_to_kilobytes(v)
+ elif k == "transparent_hugepage":
+ self.transparent_hugepage = v
+ elif k == "hugepagesz":
+ sizes.append(human_readable_to_kilobytes(v))
+ elif k == "hugepages":
+ nrs.append(v)
+ if len(sizes) != len(nrs):
+ raise RuntimeError("GRUB hugepage configuration is wrong")
+ detected_hugepages = dict(zip(sizes, map(int, nrs)))
+ self.nr_hugepages = {size: detected_hugepages.get(size, 0)
+ for size in hugepage_sizes}
+
+ def commit(self):
+ # perform sanity checks - we can't afford invalid data making it into
+ # bootloader config, as that might render user's machine unbootable, so
+ # tread really really carefully
+
+ # first, check if user didn't add any unexpected hugepage sizes
+ configured_sizes = set(self.nr_hugepages.keys())
+ supported_sizes = set(info.hugepage_sizes_supported)
+
+ if configured_sizes != supported_sizes:
+ diff = configured_sizes.difference(supported_sizes)
+ raise ValueError("Unsupported hugepage sizes: %s" %
+ [kilobytes_to_human_readable(s) for s in diff])
+
+ # check if default hugepage is one of the supported ones
+ if self.default_hugepagesz is not None and\
+ self.default_hugepagesz not in configured_sizes:
+ s = kilobytes_to_human_readable(self.default_hugepagesz)
+ raise ValueError("Unsupported default hugepage size: %i" % s)
+
+ # transparent hugepages support was added in recent kernels, so check
+ # if user is trying to set this
+ if _find_transparent_hugepage() is None and \
+ self.transparent_hugepage is not None:
+ raise ValueError("Transparent hugepages are not unsupported")
+
+ # OK, parameters look to be valid - let's roll
+
+ # read and parse current cmdline
+ cmdline = _find_linux_default_cmdline()
+
+ values = _parse_linux_default_cmdline(cmdline)
+
+ # clear out old data
+ klist = ["transparent_hugepage", "default_hugepagesz",
+ "hugepage", "hugepagesz"]
+ # iterate over a copy so that we could delete items
+ for k, v in values[:]:
+ if k in klist:
+ values.remove((k, v))
+
+ # generate new cmdline
+ cmdline = " ".join([("%s=%s" % (k, v)) if v is not None else k
+ for k, v in values])
+
+ # now, populate cmdline with new data
+ new_items = []
+ for sz, nr in self.nr_hugepages.items():
+ sz = kilobytes_to_human_readable(sz)
+ new_items += "hugepagesz=%s hugepages=%i" % (sz, nr)
+ if self.default_hugepagesz is not None:
+ new_items += "default_hugepagesz=%i" % self.default_hugepagesz
+ if self.transparent_hugepage is not None:
+ new_items += "transparent_hugepage=%s" % self.transparent_hugepage
+
+ cmdline = "%s %s" % (cmdline, " ".join(new_items))
+
+ # strip any extraneous whitespace we may have added
+ cmdline = re.sub(r"\s\s+", " ", cmdline).strip()
+
+ # now, put everything back together
+ cmdline = '%s="%s"' % (_GRUB_CMDLINE_PARAM_NAME, cmdline)
+
+ # write it to config
+ _generate_linux_default_cmdline(cmdline)
+
+ # finally, update GRUB
+ if not run(["update-grub"]):
+ raise RuntimeError("Failed to update GRUB")
+ self.update()
+
+ def reset(self):
+ self.nr_hugepages = {} # pagesz: number
+ self.default_hugepagesz = None
+ self.transparent_hugepage = None
--
2.17.1
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library Anatoly Burakov
@ 2018-11-16 0:45 ` Stephen Hemminger
2018-11-16 11:49 ` Burakov, Anatoly
0 siblings, 1 reply; 36+ messages in thread
From: Stephen Hemminger @ 2018-11-16 0:45 UTC (permalink / raw)
To: Anatoly Burakov
Cc: dev, john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
On Thu, 15 Nov 2018 15:47:13 +0000
Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> This is a placeholder for Python library abstracting away many of
> mundane details DPDK configuration scripts have to deal with. We
> need __init__.py file to make the subdirectory a package so that
> Python scripts in usertools/ can find their dependencies.
>
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> ---
> usertools/DPDKConfigLib/__init__.py | 0
> 1 file changed, 0 insertions(+), 0 deletions(-)
> create mode 100644 usertools/DPDKConfigLib/__init__.py
>
> diff --git a/usertools/DPDKConfigLib/__init__.py b/usertools/DPDKConfigLib/__init__.py
> new file mode 100644
> index 000000000..e69de29bb
Doing this a better than current code, but can we go farther?
I would like DPDK to get out of doing binds directly and switch to using driverctl
which also handles persistent rebind on reboot.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 0:45 ` Stephen Hemminger
@ 2018-11-16 11:49 ` Burakov, Anatoly
2018-11-16 14:09 ` Wiles, Keith
0 siblings, 1 reply; 36+ messages in thread
From: Burakov, Anatoly @ 2018-11-16 11:49 UTC (permalink / raw)
To: Stephen Hemminger
Cc: dev, john.mcnamara, bruce.richardson, pablo.de.lara.guarch,
david.hunt, mohammad.abdul.awal, thomas, ferruh.yigit
On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> On Thu, 15 Nov 2018 15:47:13 +0000
> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>
>> This is a placeholder for Python library abstracting away many of
>> mundane details DPDK configuration scripts have to deal with. We
>> need __init__.py file to make the subdirectory a package so that
>> Python scripts in usertools/ can find their dependencies.
>>
>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>> ---
>> usertools/DPDKConfigLib/__init__.py | 0
>> 1 file changed, 0 insertions(+), 0 deletions(-)
>> create mode 100644 usertools/DPDKConfigLib/__init__.py
>>
>> diff --git a/usertools/DPDKConfigLib/__init__.py b/usertools/DPDKConfigLib/__init__.py
>> new file mode 100644
>> index 000000000..e69de29bb
>
> Doing this a better than current code, but can we go farther?
>
> I would like DPDK to get out of doing binds directly and switch to using driverctl
> which also handles persistent rebind on reboot.
>
Wasn't the objection that it's not available everywhere? (for the
record, i have no horse in the race - i don't much care exactly how it's
done)
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 11:49 ` Burakov, Anatoly
@ 2018-11-16 14:09 ` Wiles, Keith
2018-11-16 14:13 ` Richardson, Bruce
0 siblings, 1 reply; 36+ messages in thread
From: Wiles, Keith @ 2018-11-16 14:09 UTC (permalink / raw)
To: Burakov, Anatoly
Cc: Stephen Hemminger, dev, Mcnamara, John, Richardson, Bruce,
De Lara Guarch, Pablo, Hunt, David, Awal, Mohammad Abdul, thomas,
Yigit, Ferruh
> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly <anatoly.burakov@intel.com> wrote:
>
> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
>> On Thu, 15 Nov 2018 15:47:13 +0000
>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>>> This is a placeholder for Python library abstracting away many of
>>> mundane details DPDK configuration scripts have to deal with. We
>>> need __init__.py file to make the subdirectory a package so that
>>> Python scripts in usertools/ can find their dependencies.
>>>
>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>>> ---
>>> usertools/DPDKConfigLib/__init__.py | 0
>>> 1 file changed, 0 insertions(+), 0 deletions(-)
>>> create mode 100644 usertools/DPDKConfigLib/__init__.py
>>>
>>> diff --git a/usertools/DPDKConfigLib/__init__.py b/usertools/DPDKConfigLib/__init__.py
>>> new file mode 100644
>>> index 000000000..e69de29bb
>> Doing this a better than current code, but can we go farther?
>> I would like DPDK to get out of doing binds directly and switch to using driverctl
>> which also handles persistent rebind on reboot.
>
> Wasn't the objection that it's not available everywhere? (for the record, i have no horse in the race - i don't much care exactly how it's done)
If it works on FreeBSD and Linux then I am all for it. On windows does it support this method too?
>
> --
> Thanks,
> Anatoly
Regards,
Keith
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:09 ` Wiles, Keith
@ 2018-11-16 14:13 ` Richardson, Bruce
2018-11-16 14:37 ` Burakov, Anatoly
0 siblings, 1 reply; 36+ messages in thread
From: Richardson, Bruce @ 2018-11-16 14:13 UTC (permalink / raw)
To: Wiles, Keith, Burakov, Anatoly
Cc: Stephen Hemminger, dev, Mcnamara, John, De Lara Guarch, Pablo,
Hunt, David, Awal, Mohammad Abdul, thomas, Yigit, Ferruh
> -----Original Message-----
> From: Wiles, Keith
> Sent: Friday, November 16, 2018 2:10 PM
> To: Burakov, Anatoly <anatoly.burakov@intel.com>
> Cc: Stephen Hemminger <stephen@networkplumber.org>; dev <dev@dpdk.org>;
> Mcnamara, John <john.mcnamara@intel.com>; Richardson, Bruce
> <bruce.richardson@intel.com>; De Lara Guarch, Pablo
> <pablo.de.lara.guarch@intel.com>; Hunt, David <david.hunt@intel.com>;
> Awal, Mohammad Abdul <mohammad.abdul.awal@intel.com>; thomas@monjalon.net;
> Yigit, Ferruh <ferruh.yigit@intel.com>
> Subject: Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python
> library
>
>
>
> > On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
> <anatoly.burakov@intel.com> wrote:
> >
> > On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> >> On Thu, 15 Nov 2018 15:47:13 +0000
> >> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> >>> This is a placeholder for Python library abstracting away many of
> >>> mundane details DPDK configuration scripts have to deal with. We
> >>> need __init__.py file to make the subdirectory a package so that
> >>> Python scripts in usertools/ can find their dependencies.
> >>>
> >>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> >>> ---
> >>> usertools/DPDKConfigLib/__init__.py | 0
> >>> 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644
> >>> usertools/DPDKConfigLib/__init__.py
> >>>
> >>> diff --git a/usertools/DPDKConfigLib/__init__.py
> >>> b/usertools/DPDKConfigLib/__init__.py
> >>> new file mode 100644
> >>> index 000000000..e69de29bb
> >> Doing this a better than current code, but can we go farther?
> >> I would like DPDK to get out of doing binds directly and switch to
> >> using driverctl which also handles persistent rebind on reboot.
> >
> > Wasn't the objection that it's not available everywhere? (for the
> > record, i have no horse in the race - i don't much care exactly how
> > it's done)
>
> If it works on FreeBSD and Linux then I am all for it. On windows does it
> support this method too?
> >
Binding and unbinding is completely different on each OS. FreeBSD has no overlap
of scripts with Linux, so replacing some of our tools with driverctl won't affect
that OS.
/Bruce
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:13 ` Richardson, Bruce
@ 2018-11-16 14:37 ` Burakov, Anatoly
2018-11-16 14:55 ` Thomas Monjalon
2018-11-16 15:38 ` Wiles, Keith
0 siblings, 2 replies; 36+ messages in thread
From: Burakov, Anatoly @ 2018-11-16 14:37 UTC (permalink / raw)
To: Richardson, Bruce, Wiles, Keith
Cc: Stephen Hemminger, dev, Mcnamara, John, De Lara Guarch, Pablo,
Hunt, David, Awal, Mohammad Abdul, thomas, Yigit, Ferruh
On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
>
>
>> -----Original Message-----
>> From: Wiles, Keith
>> Sent: Friday, November 16, 2018 2:10 PM
>> To: Burakov, Anatoly <anatoly.burakov@intel.com>
>> Cc: Stephen Hemminger <stephen@networkplumber.org>; dev <dev@dpdk.org>;
>> Mcnamara, John <john.mcnamara@intel.com>; Richardson, Bruce
>> <bruce.richardson@intel.com>; De Lara Guarch, Pablo
>> <pablo.de.lara.guarch@intel.com>; Hunt, David <david.hunt@intel.com>;
>> Awal, Mohammad Abdul <mohammad.abdul.awal@intel.com>; thomas@monjalon.net;
>> Yigit, Ferruh <ferruh.yigit@intel.com>
>> Subject: Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python
>> library
>>
>>
>>
>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
>> <anatoly.burakov@intel.com> wrote:
>>>
>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
>>>> On Thu, 15 Nov 2018 15:47:13 +0000
>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>>>>> This is a placeholder for Python library abstracting away many of
>>>>> mundane details DPDK configuration scripts have to deal with. We
>>>>> need __init__.py file to make the subdirectory a package so that
>>>>> Python scripts in usertools/ can find their dependencies.
>>>>>
>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>> ---
>>>>> usertools/DPDKConfigLib/__init__.py | 0
>>>>> 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644
>>>>> usertools/DPDKConfigLib/__init__.py
>>>>>
>>>>> diff --git a/usertools/DPDKConfigLib/__init__.py
>>>>> b/usertools/DPDKConfigLib/__init__.py
>>>>> new file mode 100644
>>>>> index 000000000..e69de29bb
>>>> Doing this a better than current code, but can we go farther?
>>>> I would like DPDK to get out of doing binds directly and switch to
>>>> using driverctl which also handles persistent rebind on reboot.
>>>
>>> Wasn't the objection that it's not available everywhere? (for the
>>> record, i have no horse in the race - i don't much care exactly how
>>> it's done)
>>
>> If it works on FreeBSD and Linux then I am all for it. On windows does it
>> support this method too?
>>>
>
> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
> of scripts with Linux, so replacing some of our tools with driverctl won't affect
> that OS.
>
> /Bruce
>
...however, we could abstract that away in our tools, and use
OS-appropriate tools independently of what we're running on. There could
still be value in fixing devbind everyone knows and love to work on all
OS's without too much hassle :)
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:37 ` Burakov, Anatoly
@ 2018-11-16 14:55 ` Thomas Monjalon
2018-11-16 15:41 ` Wiles, Keith
2018-11-16 15:43 ` Burakov, Anatoly
2018-11-16 15:38 ` Wiles, Keith
1 sibling, 2 replies; 36+ messages in thread
From: Thomas Monjalon @ 2018-11-16 14:55 UTC (permalink / raw)
To: Burakov, Anatoly
Cc: Richardson, Bruce, Wiles, Keith, Stephen Hemminger, dev,
Mcnamara, John, De Lara Guarch, Pablo, Hunt, David, Awal,
Mohammad Abdul, Yigit, Ferruh
16/11/2018 15:37, Burakov, Anatoly:
> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
> > From: Wiles, Keith
> >>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
> >>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> >>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> >>>>> This is a placeholder for Python library abstracting away many of
> >>>>> mundane details DPDK configuration scripts have to deal with. We
> >>>>> need __init__.py file to make the subdirectory a package so that
> >>>>> Python scripts in usertools/ can find their dependencies.
> >>>>>
> >>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> >>>>
> >>>> Doing this a better than current code, but can we go farther?
> >>>> I would like DPDK to get out of doing binds directly and switch to
> >>>> using driverctl which also handles persistent rebind on reboot.
> >>>
> >>> Wasn't the objection that it's not available everywhere? (for the
> >>> record, i have no horse in the race - i don't much care exactly how
> >>> it's done)
> >>
> >> If it works on FreeBSD and Linux then I am all for it. On windows does it
> >> support this method too?
> >
> > Binding and unbinding is completely different on each OS. FreeBSD has no overlap
> > of scripts with Linux, so replacing some of our tools with driverctl won't affect
> > that OS.
> >
> > /Bruce
>
> ...however, we could abstract that away in our tools, and use
> OS-appropriate tools independently of what we're running on. There could
> still be value in fixing devbind everyone knows and love to work on all
> OS's without too much hassle :)
Yes, easier script is always better.
Another thought, I would like we think about integrating binding/unbinding
code inside EAL and bus drivers, and manage it via the PMDs.
There could be an option to bind on scan and unbind on rte_dev_remove.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:37 ` Burakov, Anatoly
2018-11-16 14:55 ` Thomas Monjalon
@ 2018-11-16 15:38 ` Wiles, Keith
1 sibling, 0 replies; 36+ messages in thread
From: Wiles, Keith @ 2018-11-16 15:38 UTC (permalink / raw)
To: Burakov, Anatoly
Cc: Richardson, Bruce, Stephen Hemminger, dev, Mcnamara, John,
De Lara Guarch, Pablo, Hunt, David, Awal, Mohammad Abdul, thomas,
Yigit, Ferruh
> On Nov 16, 2018, at 8:37 AM, Burakov, Anatoly <anatoly.burakov@intel.com> wrote:
>
> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
>>> -----Original Message-----
>>> From: Wiles, Keith
>>> Sent: Friday, November 16, 2018 2:10 PM
>>> To: Burakov, Anatoly <anatoly.burakov@intel.com>
>>> Cc: Stephen Hemminger <stephen@networkplumber.org>; dev <dev@dpdk.org>;
>>> Mcnamara, John <john.mcnamara@intel.com>; Richardson, Bruce
>>> <bruce.richardson@intel.com>; De Lara Guarch, Pablo
>>> <pablo.de.lara.guarch@intel.com>; Hunt, David <david.hunt@intel.com>;
>>> Awal, Mohammad Abdul <mohammad.abdul.awal@intel.com>; thomas@monjalon.net;
>>> Yigit, Ferruh <ferruh.yigit@intel.com>
>>> Subject: Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python
>>> library
>>>
>>>
>>>
>>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
>>> <anatoly.burakov@intel.com> wrote:
>>>>
>>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
>>>>> On Thu, 15 Nov 2018 15:47:13 +0000
>>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>>>>>> This is a placeholder for Python library abstracting away many of
>>>>>> mundane details DPDK configuration scripts have to deal with. We
>>>>>> need __init__.py file to make the subdirectory a package so that
>>>>>> Python scripts in usertools/ can find their dependencies.
>>>>>>
>>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>>> ---
>>>>>> usertools/DPDKConfigLib/__init__.py | 0
>>>>>> 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644
>>>>>> usertools/DPDKConfigLib/__init__.py
>>>>>>
>>>>>> diff --git a/usertools/DPDKConfigLib/__init__.py
>>>>>> b/usertools/DPDKConfigLib/__init__.py
>>>>>> new file mode 100644
>>>>>> index 000000000..e69de29bb
>>>>> Doing this a better than current code, but can we go farther?
>>>>> I would like DPDK to get out of doing binds directly and switch to
>>>>> using driverctl which also handles persistent rebind on reboot.
>>>>
>>>> Wasn't the objection that it's not available everywhere? (for the
>>>> record, i have no horse in the race - i don't much care exactly how
>>>> it's done)
>>>
>>> If it works on FreeBSD and Linux then I am all for it. On windows does it
>>> support this method too?
>>>>
>> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
>> of scripts with Linux, so replacing some of our tools with driverctl won't affect
>> that OS.
>> /Bruce
>
> ...however, we could abstract that away in our tools, and use OS-appropriate tools independently of what we're running on. There could still be value in fixing devbind everyone knows and love to work on all OS's without too much hassle :)
Having one tool to rule them all would be great. The one I worry about is windows, but if it can be done then we should do it.
The library code you have done is a great direction to solve these problems.
>
> --
> Thanks,
> Anatoly
Regards,
Keith
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:55 ` Thomas Monjalon
@ 2018-11-16 15:41 ` Wiles, Keith
2018-11-16 15:43 ` Burakov, Anatoly
1 sibling, 0 replies; 36+ messages in thread
From: Wiles, Keith @ 2018-11-16 15:41 UTC (permalink / raw)
To: Thomas Monjalon
Cc: Burakov, Anatoly, Richardson, Bruce, Stephen Hemminger, dev,
Mcnamara, John, De Lara Guarch, Pablo, Hunt, David, Awal,
Mohammad Abdul, Yigit, Ferruh
> On Nov 16, 2018, at 8:55 AM, Thomas Monjalon <thomas@monjalon.net> wrote:
>
> 16/11/2018 15:37, Burakov, Anatoly:
>> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
>>> From: Wiles, Keith
>>>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
>>>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
>>>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>>>>>>> This is a placeholder for Python library abstracting away many of
>>>>>>> mundane details DPDK configuration scripts have to deal with. We
>>>>>>> need __init__.py file to make the subdirectory a package so that
>>>>>>> Python scripts in usertools/ can find their dependencies.
>>>>>>>
>>>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>>>
>>>>>> Doing this a better than current code, but can we go farther?
>>>>>> I would like DPDK to get out of doing binds directly and switch to
>>>>>> using driverctl which also handles persistent rebind on reboot.
>>>>>
>>>>> Wasn't the objection that it's not available everywhere? (for the
>>>>> record, i have no horse in the race - i don't much care exactly how
>>>>> it's done)
>>>>
>>>> If it works on FreeBSD and Linux then I am all for it. On windows does it
>>>> support this method too?
>>>
>>> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
>>> of scripts with Linux, so replacing some of our tools with driverctl won't affect
>>> that OS.
>>>
>>> /Bruce
>>
>> ...however, we could abstract that away in our tools, and use
>> OS-appropriate tools independently of what we're running on. There could
>> still be value in fixing devbind everyone knows and love to work on all
>> OS's without too much hassle :)
>
> Yes, easier script is always better.
>
> Another thought, I would like we think about integrating binding/unbinding
> code inside EAL and bus drivers, and manage it via the PMDs.
> There could be an option to bind on scan and unbind on rte_dev_remove.
>
Would it be OK to call the tool from the PMD or are wanting new APIs in DPDK?
>
Regards,
Keith
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 14:55 ` Thomas Monjalon
2018-11-16 15:41 ` Wiles, Keith
@ 2018-11-16 15:43 ` Burakov, Anatoly
2018-11-16 15:58 ` Thomas Monjalon
2018-11-16 16:08 ` Bruce Richardson
1 sibling, 2 replies; 36+ messages in thread
From: Burakov, Anatoly @ 2018-11-16 15:43 UTC (permalink / raw)
To: Thomas Monjalon
Cc: Richardson, Bruce, Wiles, Keith, Stephen Hemminger, dev,
Mcnamara, John, De Lara Guarch, Pablo, Hunt, David, Awal,
Mohammad Abdul, Yigit, Ferruh
On 16-Nov-18 2:55 PM, Thomas Monjalon wrote:
> 16/11/2018 15:37, Burakov, Anatoly:
>> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
>>> From: Wiles, Keith
>>>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
>>>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
>>>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
>>>>>>> This is a placeholder for Python library abstracting away many of
>>>>>>> mundane details DPDK configuration scripts have to deal with. We
>>>>>>> need __init__.py file to make the subdirectory a package so that
>>>>>>> Python scripts in usertools/ can find their dependencies.
>>>>>>>
>>>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>>>
>>>>>> Doing this a better than current code, but can we go farther?
>>>>>> I would like DPDK to get out of doing binds directly and switch to
>>>>>> using driverctl which also handles persistent rebind on reboot.
>>>>>
>>>>> Wasn't the objection that it's not available everywhere? (for the
>>>>> record, i have no horse in the race - i don't much care exactly how
>>>>> it's done)
>>>>
>>>> If it works on FreeBSD and Linux then I am all for it. On windows does it
>>>> support this method too?
>>>
>>> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
>>> of scripts with Linux, so replacing some of our tools with driverctl won't affect
>>> that OS.
>>>
>>> /Bruce
>>
>> ...however, we could abstract that away in our tools, and use
>> OS-appropriate tools independently of what we're running on. There could
>> still be value in fixing devbind everyone knows and love to work on all
>> OS's without too much hassle :)
>
> Yes, easier script is always better.
>
> Another thought, I would like we think about integrating binding/unbinding
> code inside EAL and bus drivers, and manage it via the PMDs.
> There could be an option to bind on scan and unbind on rte_dev_remove.
>
I didn't like it back when it was a thing, and i don't particularly like
this idea now, to be honest. Port binding should not be under purview of
the application, but is firmly in the domain of system administrator
IMO. I don't think it's our place to change system configuration while
we're running.
--
Thanks,
Anatoly
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 15:43 ` Burakov, Anatoly
@ 2018-11-16 15:58 ` Thomas Monjalon
2018-11-16 16:10 ` Bruce Richardson
2018-11-16 16:08 ` Bruce Richardson
1 sibling, 1 reply; 36+ messages in thread
From: Thomas Monjalon @ 2018-11-16 15:58 UTC (permalink / raw)
To: Burakov, Anatoly
Cc: Richardson, Bruce, Wiles, Keith, Stephen Hemminger, dev,
Mcnamara, John, De Lara Guarch, Pablo, Hunt, David, Awal,
Mohammad Abdul, Yigit, Ferruh
16/11/2018 16:43, Burakov, Anatoly:
> On 16-Nov-18 2:55 PM, Thomas Monjalon wrote:
> > 16/11/2018 15:37, Burakov, Anatoly:
> >> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
> >>> From: Wiles, Keith
> >>>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
> >>>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> >>>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> >>>>>>> This is a placeholder for Python library abstracting away many of
> >>>>>>> mundane details DPDK configuration scripts have to deal with. We
> >>>>>>> need __init__.py file to make the subdirectory a package so that
> >>>>>>> Python scripts in usertools/ can find their dependencies.
> >>>>>>>
> >>>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> >>>>>>
> >>>>>> Doing this a better than current code, but can we go farther?
> >>>>>> I would like DPDK to get out of doing binds directly and switch to
> >>>>>> using driverctl which also handles persistent rebind on reboot.
> >>>>>
> >>>>> Wasn't the objection that it's not available everywhere? (for the
> >>>>> record, i have no horse in the race - i don't much care exactly how
> >>>>> it's done)
> >>>>
> >>>> If it works on FreeBSD and Linux then I am all for it. On windows does it
> >>>> support this method too?
> >>>
> >>> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
> >>> of scripts with Linux, so replacing some of our tools with driverctl won't affect
> >>> that OS.
> >>>
> >>> /Bruce
> >>
> >> ...however, we could abstract that away in our tools, and use
> >> OS-appropriate tools independently of what we're running on. There could
> >> still be value in fixing devbind everyone knows and love to work on all
> >> OS's without too much hassle :)
> >
> > Yes, easier script is always better.
> >
> > Another thought, I would like we think about integrating binding/unbinding
> > code inside EAL and bus drivers, and manage it via the PMDs.
> > There could be an option to bind on scan and unbind on rte_dev_remove.
>
> I didn't like it back when it was a thing, and i don't particularly like
> this idea now, to be honest. Port binding should not be under purview of
> the application, but is firmly in the domain of system administrator
> IMO. I don't think it's our place to change system configuration while
> we're running.
Yes I agree, administration should be done separately.
However, there are 3 scenarios to manage properly:
- hotplug: can it be configured in advance?
- dynamically release device to kernel
- some drivers can share a device with the kernel
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 15:43 ` Burakov, Anatoly
2018-11-16 15:58 ` Thomas Monjalon
@ 2018-11-16 16:08 ` Bruce Richardson
1 sibling, 0 replies; 36+ messages in thread
From: Bruce Richardson @ 2018-11-16 16:08 UTC (permalink / raw)
To: Burakov, Anatoly
Cc: Thomas Monjalon, Wiles, Keith, Stephen Hemminger, dev, Mcnamara,
John, De Lara Guarch, Pablo, Hunt, David, Awal, Mohammad Abdul,
Yigit, Ferruh
On Fri, Nov 16, 2018 at 03:43:57PM +0000, Burakov, Anatoly wrote:
> On 16-Nov-18 2:55 PM, Thomas Monjalon wrote:
> > 16/11/2018 15:37, Burakov, Anatoly:
> > > On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
> > > > From: Wiles, Keith
> > > > > > On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
> > > > > > On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> > > > > > > Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> > > > > > > > This is a placeholder for Python library abstracting away many of
> > > > > > > > mundane details DPDK configuration scripts have to deal with. We
> > > > > > > > need __init__.py file to make the subdirectory a package so that
> > > > > > > > Python scripts in usertools/ can find their dependencies.
> > > > > > > >
> > > > > > > > Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> > > > > > >
> > > > > > > Doing this a better than current code, but can we go farther?
> > > > > > > I would like DPDK to get out of doing binds directly and switch to
> > > > > > > using driverctl which also handles persistent rebind on reboot.
> > > > > >
> > > > > > Wasn't the objection that it's not available everywhere? (for the
> > > > > > record, i have no horse in the race - i don't much care exactly how
> > > > > > it's done)
> > > > >
> > > > > If it works on FreeBSD and Linux then I am all for it. On windows does it
> > > > > support this method too?
> > > >
> > > > Binding and unbinding is completely different on each OS. FreeBSD has no overlap
> > > > of scripts with Linux, so replacing some of our tools with driverctl won't affect
> > > > that OS.
> > > >
> > > > /Bruce
> > >
> > > ...however, we could abstract that away in our tools, and use
> > > OS-appropriate tools independently of what we're running on. There could
> > > still be value in fixing devbind everyone knows and love to work on all
> > > OS's without too much hassle :)
> >
> > Yes, easier script is always better.
> >
> > Another thought, I would like we think about integrating binding/unbinding
> > code inside EAL and bus drivers, and manage it via the PMDs.
> > There could be an option to bind on scan and unbind on rte_dev_remove.
> >
>
> I didn't like it back when it was a thing, and i don't particularly like
> this idea now, to be honest. Port binding should not be under purview of the
> application, but is firmly in the domain of system administrator IMO. I
> don't think it's our place to change system configuration while we're
> running.
>
I tend to agree. I think driverctl is the way to go here.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library
2018-11-16 15:58 ` Thomas Monjalon
@ 2018-11-16 16:10 ` Bruce Richardson
0 siblings, 0 replies; 36+ messages in thread
From: Bruce Richardson @ 2018-11-16 16:10 UTC (permalink / raw)
To: Thomas Monjalon
Cc: Burakov, Anatoly, Wiles, Keith, Stephen Hemminger, dev, Mcnamara,
John, De Lara Guarch, Pablo, Hunt, David, Awal, Mohammad Abdul,
Yigit, Ferruh
On Fri, Nov 16, 2018 at 04:58:10PM +0100, Thomas Monjalon wrote:
> 16/11/2018 16:43, Burakov, Anatoly:
> > On 16-Nov-18 2:55 PM, Thomas Monjalon wrote:
> > > 16/11/2018 15:37, Burakov, Anatoly:
> > >> On 16-Nov-18 2:13 PM, Richardson, Bruce wrote:
> > >>> From: Wiles, Keith
> > >>>>> On Nov 16, 2018, at 5:49 AM, Burakov, Anatoly
> > >>>>> On 16-Nov-18 12:45 AM, Stephen Hemminger wrote:
> > >>>>>> Anatoly Burakov <anatoly.burakov@intel.com> wrote:
> > >>>>>>> This is a placeholder for Python library abstracting away many of
> > >>>>>>> mundane details DPDK configuration scripts have to deal with. We
> > >>>>>>> need __init__.py file to make the subdirectory a package so that
> > >>>>>>> Python scripts in usertools/ can find their dependencies.
> > >>>>>>>
> > >>>>>>> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> > >>>>>>
> > >>>>>> Doing this a better than current code, but can we go farther?
> > >>>>>> I would like DPDK to get out of doing binds directly and switch to
> > >>>>>> using driverctl which also handles persistent rebind on reboot.
> > >>>>>
> > >>>>> Wasn't the objection that it's not available everywhere? (for the
> > >>>>> record, i have no horse in the race - i don't much care exactly how
> > >>>>> it's done)
> > >>>>
> > >>>> If it works on FreeBSD and Linux then I am all for it. On windows does it
> > >>>> support this method too?
> > >>>
> > >>> Binding and unbinding is completely different on each OS. FreeBSD has no overlap
> > >>> of scripts with Linux, so replacing some of our tools with driverctl won't affect
> > >>> that OS.
> > >>>
> > >>> /Bruce
> > >>
> > >> ...however, we could abstract that away in our tools, and use
> > >> OS-appropriate tools independently of what we're running on. There could
> > >> still be value in fixing devbind everyone knows and love to work on all
> > >> OS's without too much hassle :)
> > >
> > > Yes, easier script is always better.
> > >
> > > Another thought, I would like we think about integrating binding/unbinding
> > > code inside EAL and bus drivers, and manage it via the PMDs.
> > > There could be an option to bind on scan and unbind on rte_dev_remove.
> >
> > I didn't like it back when it was a thing, and i don't particularly like
> > this idea now, to be honest. Port binding should not be under purview of
> > the application, but is firmly in the domain of system administrator
> > IMO. I don't think it's our place to change system configuration while
> > we're running.
>
> Yes I agree, administration should be done separately.
> However, there are 3 scenarios to manage properly:
> - hotplug: can it be configured in advance?
I think using driverctl could help here. Only if a device is automatically
bound to a suitable kernel driver, DPDK should hotplug it in.
> - dynamically release device to kernel
> - some drivers can share a device with the kernel
>
>
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2018-11-16 16:10 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-25 15:59 [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 1/9] usertools: add DPDK config lib python library Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 2/9] usertools/lib: add platform info library Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 5/9] usertools/lib: add device information library Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 7/9] usertools/lib: add hugepage information library Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 8/9] usertools: add hugepage info script Anatoly Burakov
2018-06-25 15:59 ` [dpdk-dev] [RFC 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
2018-06-26 1:09 ` Kevin Wilson
2018-06-26 9:05 ` Burakov, Anatoly
2018-08-14 10:11 ` [dpdk-dev] [RFC 0/9] Modularize and enhance DPDK Python scripts Burakov, Anatoly
2018-08-28 8:16 ` Burakov, Anatoly
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 " Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 1/9] usertools: add DPDK config lib python library Anatoly Burakov
2018-11-16 0:45 ` Stephen Hemminger
2018-11-16 11:49 ` Burakov, Anatoly
2018-11-16 14:09 ` Wiles, Keith
2018-11-16 14:13 ` Richardson, Bruce
2018-11-16 14:37 ` Burakov, Anatoly
2018-11-16 14:55 ` Thomas Monjalon
2018-11-16 15:41 ` Wiles, Keith
2018-11-16 15:43 ` Burakov, Anatoly
2018-11-16 15:58 ` Thomas Monjalon
2018-11-16 16:10 ` Bruce Richardson
2018-11-16 16:08 ` Bruce Richardson
2018-11-16 15:38 ` Wiles, Keith
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 2/9] usertools/lib: add platform info library Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 3/9] usertools/cpu_layout: rewrite to use DPDKConfigLib Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 4/9] usertools/lib: support FreeBSD for platform info Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 5/9] usertools/lib: add device information library Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 6/9] usertools/devbind: switch to using DPDKConfigLib Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 7/9] usertools/lib: add hugepage information library Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 8/9] usertools: add hugepage info script Anatoly Burakov
2018-11-15 15:47 ` [dpdk-dev] [RFC v2 9/9] usertools/lib: add GRUB utility library for hugepage config Anatoly Burakov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).