* [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule
@ 2020-10-14 8:41 SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow SimonX Lu
` (8 more replies)
0 siblings, 9 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
follow mirror rule to add new action called mirror in flow management,
so we can use "flow create * pattern * action mirror *" to replace
old "set port * mirror-rule *" command now
the example of mirror rule command mapping to flow management command:
(in below command, port 0 is PF and port 1-3 is VF):
1) ingress: pf => pf
set port 0 mirror-rule 0 uplink-mirror dst-pool 4 on
or
flow create 0 ingress pattern pf / end actions mirror pf / end
2) egress: pf => pf
set port 0 mirror-rule 0 downlink-mirror dst-pool 4 on
or
flow create 0 egress pattern pf / end actions mirror pf / end
3) ingress: pf => vf 3
set port 0 mirror-rule 0 uplink-mirror dst-pool 3 on
or
flow create 0 ingress pattern pf / end actions mirror vf id 3 / end
4) egress: pf => vf 3
set port 0 mirror-rule 0 downlink-mirror dst-pool 3 on
or
flow create 0 egress pattern pf / end actions mirror vf id 3 / end
5) ingress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 4 on
or
flow create 0 ingress pattern vf id is 0 / end actions mirror pf / end
flow create 0 ingress pattern vf id is 1 / end actions mirror pf / end
or
flow create 0 ingress pattern vf id last 1 / end actions mirror pf / end
or
flow create 0 ingress pattern vf id mask 0x3 / end actions mirror pf / end
6) egress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-down 0x3 dst-pool 4 on
or
flow create 0 egress pattern vf id is 0 / end actions mirror pf / end
flow create 0 egress pattern vf id is 1 / end actions mirror pf / end
or
flow create 0 egress pattern vf id last 1 / end actions mirror pf / end
or
flow create 0 egress pattern vf id mask 0x3 / end actions mirror pf / end
7) ingress: vf 1,2 => vf 3
set port 0 mirror-rule 0 pool-mirror-up 0x6 dst-pool 3 on
or
flow create 0 ingress pattern vf id is 1 / end actions mirror vf id 3 / end
flow create 0 ingress pattern vf id is 2 / end actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id is 1 id last 2 / end actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id mask 0x6 / end actions mirror vf id 3 / end
8) egress: vf 1,2 => vf 3
set port 0 mirror-rule 0 pool-mirror-down 0x6 dst-pool 3 on
or
flow create 0 egress pattern vf id is 1 / end actions mirror vf id 3 / end
flow create 0 egress pattern vf id is 2 / end actions mirror vf id 3 / end
or
flow create 0 egress pattern vf id is 1 id last 2 / end actions mirror vf id 3 / end
or
flow create 0 egress pattern vf id mask 0x6 / end actions mirror vf id 3 / end
9) ingress: vlan 4,6 => vf 3
set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 4 on
or
flow create 0 ingress pattern vlan vid is 4 / end actions mirror vf id 3 / end
flow create 0 ingress pattern vlan vid is 6 / end actions mirror vf id 3 end
or
flow create 0 ingress pattern vlan vid mask 0x28 / end actions mirror vf id 3 / end
or
flow create 0 ingress pattern vlan vid is 4 vid last 6 vid mask 0x5 / end
actions mirror vf id 3 / end
Simon Lu (8):
ethdev: support the mirror action for flow
app/testpmd: support action mirror for flow command
net/ixgbe: add mirror rule config and extend flow filter type
net/ixgbe: define the mirror filter paser
net/ixgbe: use generic flow command to re-realize mirror rule
net/i40e: add mirror rule config and export add/del rule APIs
net/i40e: define the mirror filter paser
net/i40e: use generic flow command to re-realize mirror rule
app/test-pmd/cmdline_flow.c | 36 +++
drivers/net/i40e/i40e_ethdev.c | 13 +-
drivers/net/i40e/i40e_ethdev.h | 34 +++
drivers/net/i40e/i40e_flow.c | 416 +++++++++++++++++++++++++++-
drivers/net/ixgbe/ixgbe_ethdev.c | 8 -
drivers/net/ixgbe/ixgbe_ethdev.h | 53 +++-
drivers/net/ixgbe/ixgbe_flow.c | 456 +++++++++++++++++++++++++++++++
lib/librte_ethdev/rte_eth_ctrl.h | 1 +
lib/librte_ethdev/rte_flow.c | 1 +
lib/librte_ethdev/rte_flow.h | 7 +
10 files changed, 1000 insertions(+), 25 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 12:07 ` Ori Kam
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 2/8] app/testpmd: support action mirror for flow command SimonX Lu
` (7 subsequent siblings)
8 siblings, 1 reply; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
Added the mirror type within rte_filter_type, and defined corresponding
action & item to support mirror in rte_flow.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
lib/librte_ethdev/rte_eth_ctrl.h | 1 +
lib/librte_ethdev/rte_flow.c | 1 +
lib/librte_ethdev/rte_flow.h | 7 +++++++
3 files changed, 9 insertions(+)
diff --git a/lib/librte_ethdev/rte_eth_ctrl.h b/lib/librte_ethdev/rte_eth_ctrl.h
index 1416c371f..1418854e0 100644
--- a/lib/librte_ethdev/rte_eth_ctrl.h
+++ b/lib/librte_ethdev/rte_eth_ctrl.h
@@ -35,6 +35,7 @@ enum rte_filter_type {
RTE_ETH_FILTER_TUNNEL,
RTE_ETH_FILTER_FDIR,
RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_MIRROR,
RTE_ETH_FILTER_L2_TUNNEL,
RTE_ETH_FILTER_GENERIC,
RTE_ETH_FILTER_MAX
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 8d1b279bc..2718b9cfb 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -117,6 +117,7 @@ static const struct rte_flow_desc_data rte_flow_desc_action[] = {
MK_FLOW_ACTION(DROP, 0),
MK_FLOW_ACTION(COUNT, sizeof(struct rte_flow_action_count)),
MK_FLOW_ACTION(RSS, sizeof(struct rte_flow_action_rss)),
+ MK_FLOW_ACTION(MIRROR, 0),
MK_FLOW_ACTION(PF, 0),
MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
MK_FLOW_ACTION(PHY_PORT, sizeof(struct rte_flow_action_phy_port)),
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index da8bfa548..016578fa2 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1730,6 +1730,13 @@ enum rte_flow_action_type {
*/
RTE_FLOW_ACTION_TYPE_RSS,
+ /**
+ * Mirror traffic to a given virtual function or physical function
+ *
+ * See struct rte_flow_action_mirror.
+ */
+ RTE_FLOW_ACTION_TYPE_MIRROR,
+
/**
* Directs matching traffic to the physical function (PF) of the
* current device.
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 2/8] app/testpmd: support action mirror for flow command
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 3/8] net/ixgbe: add mirror rule config and extend flow filter type SimonX Lu
` (6 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
Add mirror index: ACTION_MIRROR, ACTION_MIRROR_VF, ACTION_MIRROR_VF_ID.
Append the mirror action to the token_list for flow parse.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
app/test-pmd/cmdline_flow.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 6e04d538e..3bf4293a7 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -276,6 +276,9 @@ enum index {
ACTION_VF,
ACTION_VF_ORIGINAL,
ACTION_VF_ID,
+ ACTION_MIRROR,
+ ACTION_MIRROR_VF,
+ ACTION_MIRROR_VF_ID,
ACTION_PHY_PORT,
ACTION_PHY_PORT_ORIGINAL,
ACTION_PHY_PORT_INDEX,
@@ -1144,6 +1147,7 @@ static const enum index next_action[] = {
ACTION_DROP,
ACTION_COUNT,
ACTION_RSS,
+ ACTION_MIRROR,
ACTION_PF,
ACTION_VF,
ACTION_PHY_PORT,
@@ -1233,6 +1237,17 @@ static const enum index action_vf[] = {
ZERO,
};
+static const enum index action_mirror[] = {
+ ACTION_PF,
+ ACTION_MIRROR_VF,
+ ZERO,
+};
+
+static const enum index action_mirror_vf[] = {
+ ACTION_MIRROR_VF_ID,
+ ZERO,
+};
+
static const enum index action_phy_port[] = {
ACTION_PHY_PORT_ORIGINAL,
ACTION_PHY_PORT_INDEX,
@@ -3116,6 +3131,27 @@ static const struct token token_list[] = {
.call = parse_vc_action_rss_queue,
.comp = comp_vc_action_rss_queue,
},
+ [ACTION_MIRROR] = {
+ .name = "mirror",
+ .help = "mirror",
+ .priv = PRIV_ACTION(MIRROR, 0),
+ .next = NEXT(action_mirror),
+ .call = parse_vc,
+ },
+ [ACTION_MIRROR_VF] = {
+ .name = "vf",
+ .help = "direct traffic to a virtual function ID",
+ .priv = PRIV_ACTION(VF, sizeof(struct rte_flow_action_vf)),
+ .next = NEXT(action_mirror_vf),
+ .call = parse_vc,
+ },
+ [ACTION_MIRROR_VF_ID] = {
+ .name = "id",
+ .help = "VF ID",
+ .next = NEXT(NEXT_ENTRY(ACTION_NEXT), NEXT_ENTRY(UNSIGNED)),
+ .args = ARGS(ARGS_ENTRY(struct rte_flow_action_vf, id)),
+ .call = parse_vc_conf,
+ },
[ACTION_PF] = {
.name = "pf",
.help = "direct traffic to physical function",
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 3/8] net/ixgbe: add mirror rule config and extend flow filter type
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 2/8] app/testpmd: support action mirror for flow command SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 4/8] net/ixgbe: define the mirror filter paser SimonX Lu
` (5 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
define ixgbe_flow_mirror_conf structure that is used for set mirror flow
rule to ixgbe register, and relocate the mirror related MACORs to header
file.
Add base flow filter insert & remove for mirror filter.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 8 -----
drivers/net/ixgbe/ixgbe_ethdev.h | 53 ++++++++++++++++++++++++++++++--
2 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 0b98e210e..10bbc4670 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5744,14 +5744,6 @@ ixgbe_convert_vm_rx_mask_to_val(uint16_t rx_mask, uint32_t orig_val)
return new_val;
}
-#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
-#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
-#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */
-#define IXGBE_MRCTL_VLME 0x08 /* VLAN Mirroring. */
-#define IXGBE_INVALID_MIRROR_TYPE(mirror_type) \
- ((mirror_type) & ~(uint8_t)(ETH_MIRROR_VIRTUAL_POOL_UP | \
- ETH_MIRROR_UPLINK_PORT | ETH_MIRROR_DOWNLINK_PORT | ETH_MIRROR_VLAN))
-
static int
ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 9bdef87fb..060946b08 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -216,6 +216,27 @@ struct ixgbe_rte_flow_rss_conf {
uint16_t queue[IXGBE_MAX_RX_QUEUE_NUM]; /**< Queues indices to use. */
};
+#define IXGBE_MAX_MIRROR_RULES 4 /* Maximum nb. of mirror rules. */
+#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
+#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
+#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */
+#define IXGBE_MRCTL_VLME 0x08 /* VLAN Mirroring. */
+#define IXGBE_INVALID_MIRROR_TYPE(mirror_type) \
+ ((mirror_type) & ~(uint8_t)(ETH_MIRROR_VIRTUAL_POOL_UP |\
+ ETH_MIRROR_UPLINK_PORT | \
+ ETH_MIRROR_DOWNLINK_PORT | \
+ ETH_MIRROR_VLAN))
+
+struct ixgbe_flow_mirror_conf {
+ uint8_t rule_type;
+ uint16_t rule_id;
+ uint8_t dst_pool; /* Destination pool for this mirror rule. */
+ uint64_t pool_mask; /* Bitmap of pool for virtual pool mirroring */
+ uint64_t vlan_mask; /* mask for valid VLAN ID. */
+ /* VLAN ID list for vlan mirroring. */
+ uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
+};
+
/* structure for interrupt relative data */
struct ixgbe_interrupt {
uint32_t flags;
@@ -250,8 +271,6 @@ struct ixgbe_uta_info {
uint32_t uta_shadow[IXGBE_MAX_UTA];
};
-#define IXGBE_MAX_MIRROR_RULES 4 /* Maximum nb. of mirror rules. */
-
struct ixgbe_mirror_info {
struct rte_eth_mirror_conf mr_conf[IXGBE_MAX_MIRROR_RULES];
/**< store PF mirror rules configuration*/
@@ -337,6 +356,8 @@ struct ixgbe_filter_info {
uint32_t syn_info;
/* store the rss filter info */
struct ixgbe_rte_flow_rss_conf rss_info;
+ uint8_t mirror_mask; /* Bit mask for every used mirror filter */
+ struct ixgbe_flow_mirror_conf mirror_filters[IXGBE_MAX_MIRROR_RULES];
};
struct ixgbe_l2_tn_key {
@@ -820,4 +841,32 @@ ixgbe_ethertype_filter_remove(struct ixgbe_filter_info *filter_info,
return idx;
}
+static inline int8_t
+ixgbe_mirror_filter_insert(struct ixgbe_filter_info *filter_info,
+ struct ixgbe_flow_mirror_conf *mirror_conf)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_MAX_MIRROR_RULES; i++) {
+ if (!(filter_info->mirror_mask & (1 << i))) {
+ filter_info->mirror_mask |= 1 << i;
+ mirror_conf->rule_id = i;
+ filter_info->mirror_filters[i] = *mirror_conf;
+ return i;
+ }
+ }
+ return -1;
+}
+
+static inline int
+ixgbe_mirror_filter_remove(struct ixgbe_filter_info *filter_info,
+ uint8_t idx)
+{
+ if (idx >= IXGBE_MAX_MIRROR_RULES)
+ return -1;
+ filter_info->mirror_mask &= ~(1 << idx);
+ memset(&filter_info->mirror_filters[idx], 0,
+ sizeof(filter_info->mirror_filters[0]));
+ return idx;
+}
#endif /* _IXGBE_ETHDEV_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 4/8] net/ixgbe: define the mirror filter paser
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
` (2 preceding siblings ...)
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 3/8] net/ixgbe: add mirror rule config and extend flow filter type SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 5/8] net/ixgbe: use generic flow command to re-realize mirror rule SimonX Lu
` (4 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
define the mirror filter parser, it will divide to two pharse, the one is
mirror attributions pattern parsing, and the mirror config will be filled
in according to pattern type VF/PF/VLAN.
the another is mirror action parsing that the dst_pool of mirror config
will be filled in according to action type VF/PF.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/ixgbe/ixgbe_flow.c | 239 +++++++++++++++++++++++++++++++++
1 file changed, 239 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
index b2a2bfc02..0b0e7c630 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -49,6 +49,18 @@
#define IXGBE_MAX_N_TUPLE_PRIO 7
#define IXGBE_MAX_FLX_SOURCE_OFF 62
+#define NEXT_ITEM_OF_ACTION(act, actions, index) \
+ do { \
+ act = (actions) + (index); \
+ while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
+ (index)++; \
+ act = (actions) + (index); \
+ } \
+ } while (0)
+
+#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
+ ((vlan_item) ? ntohs((vlan_item)->tci) & 0x0fff : (default_vid))
+
/* ntuple filter list structure */
struct ixgbe_ntuple_filter_ele {
TAILQ_ENTRY(ixgbe_ntuple_filter_ele) entries;
@@ -79,6 +91,11 @@ struct ixgbe_rss_conf_ele {
TAILQ_ENTRY(ixgbe_rss_conf_ele) entries;
struct ixgbe_rte_flow_rss_conf filter_info;
};
+/* rss filter list structure */
+struct ixgbe_mirror_conf_ele {
+ TAILQ_ENTRY(ixgbe_mirror_conf_ele) entries;
+ struct ixgbe_flow_mirror_conf filter_info;
+};
/* ixgbe_flow memory list structure */
struct ixgbe_flow_mem {
TAILQ_ENTRY(ixgbe_flow_mem) entries;
@@ -91,6 +108,7 @@ TAILQ_HEAD(ixgbe_syn_filter_list, ixgbe_eth_syn_filter_ele);
TAILQ_HEAD(ixgbe_fdir_rule_filter_list, ixgbe_fdir_rule_ele);
TAILQ_HEAD(ixgbe_l2_tunnel_filter_list, ixgbe_eth_l2_tunnel_conf_ele);
TAILQ_HEAD(ixgbe_rss_filter_list, ixgbe_rss_conf_ele);
+TAILQ_HEAD(ixgbe_mirror_filter_list, ixgbe_mirror_conf_ele);
TAILQ_HEAD(ixgbe_flow_mem_list, ixgbe_flow_mem);
static struct ixgbe_ntuple_filter_list filter_ntuple_list;
@@ -2931,6 +2949,227 @@ ixgbe_clear_rss_filter(struct rte_eth_dev *dev)
ixgbe_config_rss_filter(dev, &filter_info->rss_info, FALSE);
}
+static int
+ixgbe_flow_parse_mirror_attr_pattern(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ struct rte_flow_error *error,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ const struct rte_flow_item *item = pattern;
+ const struct rte_flow_item *next_item = pattern + 1;
+ enum rte_flow_item_type item_type, next_item_type;
+ const struct rte_flow_item_vf *vf_spec, *vf_mask, *vf_last;
+ const struct rte_flow_item_vlan *vlan_spec, *vlan_mask, *vlan_last;
+ struct ixgbe_flow_mirror_conf *mirror_config = conf;
+ uint16_t vf_id, vf_id_last;
+ uint16_t vlan_id, vlan_id_mask, vlan_id_last;
+ uint16_t i, j = 0, k = 0;
+
+ if (attr->priority) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ attr, "Not support priority.");
+ return -rte_errno;
+ }
+ if (attr->group) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+ if (attr->transfer) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+
+ item_type = item->type;
+ next_item_type = next_item->type;
+ if (!(next_item_type == RTE_FLOW_ITEM_TYPE_END &&
+ (item_type == RTE_FLOW_ITEM_TYPE_PF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VLAN))) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Only support pf or vf or vlan pattern.");
+ return -rte_errno;
+ }
+ if (item_type == RTE_FLOW_ITEM_TYPE_PF) {
+ if (!attr->ingress && attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_DPME;
+ } else if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_UPME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute PF mirror.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VF) {
+ if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_VPME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress attribute for VF mirror.");
+ return -rte_errno;
+ }
+
+ vf_spec = item->spec;
+ vf_last = item->last;
+ vf_mask = item->mask;
+ if (item->spec || item->last) {
+ vf_id = (vf_spec ? vf_spec->id : 0);
+ vf_id_last = (vf_last ? vf_last->id : vf_id);
+ if (vf_id >= pci_dev->max_vfs ||
+ vf_id_last >= pci_dev->max_vfs ||
+ vf_id_last < vf_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VF ID is out of range.");
+ return -rte_errno;
+ }
+ mirror_config->pool_mask = 0;
+ for (i = vf_id, k = 0; i <= vf_id_last; i++, k++)
+ if (!vf_mask || (vf_mask->id & (1 << k)))
+ mirror_config->pool_mask |= (1ULL << i);
+ } else if (item->mask) {
+ if (vf_mask->id >= (uint32_t)(1 << pci_dev->max_vfs)) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ item,
+ "VF ID mask is out of range.");
+ return -rte_errno;
+ }
+ mirror_config->pool_mask = vf_mask->id;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_VLME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress attribute for VLAN mirror.");
+ return -rte_errno;
+ }
+
+ vlan_spec = item->spec;
+ vlan_last = item->last;
+ vlan_mask = item->mask;
+ if (item->spec || item->last) {
+ vlan_id = GET_VLAN_ID_FROM_TCI(vlan_spec, 0);
+ vlan_id_last = GET_VLAN_ID_FROM_TCI(vlan_last, vlan_id);
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+
+ if (vlan_id >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last < vlan_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VLAN ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vlan_id; i <= vlan_id_last; i++, k++)
+ if (vlan_id_mask & (1 << k))
+ mirror_config->vlan_id[j++] = i;
+
+ mirror_config->vlan_mask = (1 << j) - 1;
+ } else if (item->mask) {
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0);
+ for (i = 0; i < ETH_MIRROR_MAX_VLANS; i++) {
+ if (vlan_id_mask & (1 << i))
+ mirror_config->vlan_id[j++] = i;
+ }
+ mirror_config->vlan_mask = (1 << j) - 1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+ixgbe_flow_parse_mirror_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ const struct rte_flow_action *act;
+ const struct rte_flow_action_vf *act_q;
+ struct ixgbe_flow_mirror_conf *mirror_config = conf;
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint32_t index = 0;
+
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_MIRROR) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Not supported parameter.");
+ return -rte_errno;
+ }
+
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type == RTE_FLOW_ACTION_TYPE_PF) {
+ mirror_config->dst_pool = pci_dev->max_vfs;
+ } else if (act->type == RTE_FLOW_ACTION_TYPE_VF) {
+ act_q = act->conf;
+ if (act_q->id >= pci_dev->max_vfs) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid VF ID for mirror action");
+ return -rte_errno;
+ }
+ mirror_config->dst_pool = act_q->id;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support a parameter that is pf or vf.");
+ return -rte_errno;
+ }
+
+ /* Check if the next non-void item is END */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_END) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support a action item that is pf or vf.");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int
+ixgbe_parse_mirror_filter(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct ixgbe_flow_mirror_conf *conf,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = ixgbe_flow_parse_mirror_attr_pattern(dev,
+ attr,
+ pattern,
+ error,
+ conf);
+ if (ret)
+ return ret;
+
+ return ixgbe_flow_parse_mirror_action(dev, actions, error, conf);
+}
+
void
ixgbe_filterlist_init(void)
{
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 5/8] net/ixgbe: use generic flow command to re-realize mirror rule
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
` (3 preceding siblings ...)
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 4/8] net/ixgbe: define the mirror filter paser SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 6/8] net/i40e: add mirror rule config and export add/del rule APIs SimonX Lu
` (3 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
follow mirror rule to add new action called mirror in flow management,
so we can use "flow create * pattern * action mirror *" to replace
old "set port * mirror-rule *" command now
the example of mirror rule command mapping to flow management command:
(in below command, port 0 is PF and port 1-3 is VF):
1) ingress: pf => pf
set port 0 mirror-rule 0 uplink-mirror dst-pool 4 on
or
flow create 0 ingress pattern pf / end actions mirror pf / end
2) egress: pf => pf
set port 0 mirror-rule 0 downlink-mirror dst-pool 4 on
or
flow create 0 egress pattern pf / end actions mirror pf / end
3) ingress: pf => vf 3
set port 0 mirror-rule 0 uplink-mirror dst-pool 3 on
or
flow create 0 ingress pattern pf / end actions mirror vf id 3 / end
4) egress: pf => vf 3
set port 0 mirror-rule 0 downlink-mirror dst-pool 3 on
or
flow create 0 egress pattern pf / end actions mirror vf id 3 / end
5) ingress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 4 on
or
flow create 0 ingress pattern vf id is 0 / end actions mirror pf / end
flow create 0 ingress pattern vf id is 1 / end actions mirror pf / end
or
flow create 0 ingress pattern vf id last 1 / end \
actions mirror pf / end
or
flow create 0 ingress pattern vf id mask 0x3 / end \
actions mirror pf / end
6) ingress: vf 1,2 => vf 3
set port 0 mirror-rule 0 pool-mirror-up 0x6 dst-pool 3 on
or
flow create 0 ingress pattern vf id is 1 / end \
actions mirror vf id 3 / end
flow create 0 ingress pattern vf id is 2 / end \
actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id is 1 id last 2 / end \
actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id mask 0x6 / end \
actions mirror vf id 3 / end
7) ingress: vlan 4,6 => vf 3
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 4 on
or
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
flow create 0 ingress pattern vlan vid is 4 / end \
actions mirror vf id 3 / end
flow create 0 ingress pattern vlan vid is 6 / end \
actions mirror vf id 3 end
or
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
flow create 0 ingress pattern vlan vid mask 0x28 / end \
actions mirror vf id 3 / end
or
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
flow create 0 ingress pattern vlan vid is 4 vid \
last 6 vid mask 0x5 / end actions mirror vf id 3 / end
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/ixgbe/ixgbe_flow.c | 217 +++++++++++++++++++++++++++++++++
1 file changed, 217 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
index 0b0e7c630..7670f6870 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -117,6 +117,7 @@ static struct ixgbe_syn_filter_list filter_syn_list;
static struct ixgbe_fdir_rule_filter_list filter_fdir_list;
static struct ixgbe_l2_tunnel_filter_list filter_l2_tunnel_list;
static struct ixgbe_rss_filter_list filter_rss_list;
+static struct ixgbe_mirror_filter_list filter_mirror_list;
static struct ixgbe_flow_mem_list ixgbe_flow_list;
/**
@@ -3170,6 +3171,172 @@ ixgbe_parse_mirror_filter(struct rte_eth_dev *dev,
return ixgbe_flow_parse_mirror_action(dev, actions, error, conf);
}
+static int
+ixgbe_config_mirror_filter_add(struct rte_eth_dev *dev,
+ struct ixgbe_flow_mirror_conf *mirror_conf)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint32_t mr_ctl, vlvf;
+ uint32_t mp_lsb = 0;
+ uint32_t mv_msb = 0;
+ uint32_t mv_lsb = 0;
+ uint32_t mp_msb = 0;
+ uint8_t i = 0;
+ int reg_index = 0;
+ uint64_t vlan_mask = 0;
+
+ const uint8_t pool_mask_offset = 32;
+ const uint8_t vlan_mask_offset = 32;
+ const uint8_t dst_pool_offset = 8;
+ const uint8_t rule_mr_offset = 4;
+ const uint8_t mirror_rule_mask = 0x0F;
+
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ int8_t rule_id;
+ uint8_t mirror_type = 0;
+
+ if (ixgbe_vt_check(hw) < 0)
+ return -ENOTSUP;
+
+ if (IXGBE_INVALID_MIRROR_TYPE(mirror_conf->rule_type)) {
+ PMD_DRV_LOG(ERR, "unsupported mirror type 0x%x.",
+ mirror_conf->rule_type);
+ return -EINVAL;
+ }
+
+ rule_id = ixgbe_mirror_filter_insert(filter_info, mirror_conf);
+ if (rule_id < 0) {
+ PMD_DRV_LOG(ERR, "more than maximum mirror count(%d).",
+ IXGBE_MAX_MIRROR_RULES);
+ return -EINVAL;
+ }
+
+
+ if (mirror_conf->rule_type & ETH_MIRROR_VLAN) {
+ mirror_type |= IXGBE_MRCTL_VLME;
+ /* Check if vlan id is valid and find conresponding VLAN ID
+ * index in VLVF
+ */
+ for (i = 0; i < pci_dev->max_vfs; i++)
+ if (mirror_conf->vlan_mask & (1ULL << i)) {
+ /* search vlan id related pool vlan filter
+ * index
+ */
+ reg_index = ixgbe_find_vlvf_slot(hw,
+ mirror_conf->vlan_id[i],
+ false);
+ if (reg_index < 0)
+ return -EINVAL;
+ vlvf = IXGBE_READ_REG(hw,
+ IXGBE_VLVF(reg_index));
+ if ((vlvf & IXGBE_VLVF_VIEN) &&
+ ((vlvf & IXGBE_VLVF_VLANID_MASK) ==
+ mirror_conf->vlan_id[i])) {
+ vlan_mask |= (1ULL << reg_index);
+ } else {
+ ixgbe_mirror_filter_remove(filter_info,
+ mirror_conf->rule_id);
+ return -EINVAL;
+ }
+ }
+
+ mv_lsb = vlan_mask & 0xFFFFFFFF;
+ mv_msb = vlan_mask >> vlan_mask_offset;
+ }
+
+ /**
+ * if enable pool mirror, write related pool mask register,if disable
+ * pool mirror, clear PFMRVM register
+ */
+ if (mirror_conf->rule_type & ETH_MIRROR_VIRTUAL_POOL_UP) {
+ mirror_type |= IXGBE_MRCTL_VPME;
+ mp_lsb = mirror_conf->pool_mask & 0xFFFFFFFF;
+ mp_msb = mirror_conf->pool_mask >> pool_mask_offset;
+ }
+ if (mirror_conf->rule_type & ETH_MIRROR_UPLINK_PORT)
+ mirror_type |= IXGBE_MRCTL_UPME;
+ if (mirror_conf->rule_type & ETH_MIRROR_DOWNLINK_PORT)
+ mirror_type |= IXGBE_MRCTL_DPME;
+
+ /* read mirror control register and recalculate it */
+ mr_ctl = IXGBE_READ_REG(hw, IXGBE_MRCTL(rule_id));
+ mr_ctl |= mirror_type;
+ mr_ctl &= mirror_rule_mask;
+ mr_ctl |= mirror_conf->dst_pool << dst_pool_offset;
+
+ /* write mirrror control register */
+ IXGBE_WRITE_REG(hw, IXGBE_MRCTL(rule_id), mr_ctl);
+
+ /* write pool mirrror control register */
+ if (mirror_conf->rule_type & ETH_MIRROR_VIRTUAL_POOL_UP) {
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id), mp_lsb);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id + rule_mr_offset),
+ mp_msb);
+ }
+ /* write VLAN mirrror control register */
+ if (mirror_conf->rule_type & ETH_MIRROR_VLAN) {
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id), mv_lsb);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id + rule_mr_offset),
+ mv_msb);
+ }
+
+ return 0;
+}
+
+/* remove the mirror filter */
+static int
+ixgbe_config_mirror_filter_del(struct rte_eth_dev *dev,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ uint8_t rule_id = conf->rule_id;
+ int mr_ctl = 0;
+ uint32_t lsb_val = 0;
+ uint32_t msb_val = 0;
+ const uint8_t rule_mr_offset = 4;
+
+ if (ixgbe_vt_check(hw) < 0)
+ return -ENOTSUP;
+
+ if (rule_id >= IXGBE_MAX_MIRROR_RULES)
+ return -EINVAL;
+
+ /* clear PFVMCTL register */
+ IXGBE_WRITE_REG(hw, IXGBE_MRCTL(rule_id), mr_ctl);
+
+ /* clear pool mask register */
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id), lsb_val);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id + rule_mr_offset), msb_val);
+
+ /* clear vlan mask register */
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id), lsb_val);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id + rule_mr_offset), msb_val);
+
+ ixgbe_mirror_filter_remove(filter_info, rule_id);
+ return 0;
+}
+
+static void
+ixgbe_clear_all_mirror_filter(struct rte_eth_dev *dev)
+{
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ int i;
+
+ for (i = 0; i < IXGBE_MAX_MIRROR_RULES; i++) {
+ if (filter_info->mirror_mask & (1 << i)) {
+ ixgbe_config_mirror_filter_del(dev,
+ &filter_info->mirror_filters[i]);
+ }
+ }
+}
+
void
ixgbe_filterlist_init(void)
{
@@ -3179,6 +3346,7 @@ ixgbe_filterlist_init(void)
TAILQ_INIT(&filter_fdir_list);
TAILQ_INIT(&filter_l2_tunnel_list);
TAILQ_INIT(&filter_rss_list);
+ TAILQ_INIT(&filter_mirror_list);
TAILQ_INIT(&ixgbe_flow_list);
}
@@ -3192,6 +3360,7 @@ ixgbe_filterlist_flush(void)
struct ixgbe_fdir_rule_ele *fdir_rule_ptr;
struct ixgbe_flow_mem *ixgbe_flow_mem_ptr;
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
while ((ntuple_filter_ptr = TAILQ_FIRST(&filter_ntuple_list))) {
TAILQ_REMOVE(&filter_ntuple_list,
@@ -3235,6 +3404,13 @@ ixgbe_filterlist_flush(void)
rte_free(rss_filter_ptr);
}
+ while ((mirror_filter_ptr = TAILQ_FIRST(&filter_mirror_list))) {
+ TAILQ_REMOVE(&filter_mirror_list,
+ mirror_filter_ptr,
+ entries);
+ rte_free(mirror_filter_ptr);
+ }
+
while ((ixgbe_flow_mem_ptr = TAILQ_FIRST(&ixgbe_flow_list))) {
TAILQ_REMOVE(&ixgbe_flow_list,
ixgbe_flow_mem_ptr,
@@ -3266,6 +3442,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
struct ixgbe_hw_fdir_info *fdir_info =
IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
struct ixgbe_rte_flow_rss_conf rss_conf;
+ struct ixgbe_flow_mirror_conf mirror_conf;
struct rte_flow *flow = NULL;
struct ixgbe_ntuple_filter_ele *ntuple_filter_ptr;
struct ixgbe_ethertype_filter_ele *ethertype_filter_ptr;
@@ -3273,6 +3450,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
struct ixgbe_eth_l2_tunnel_conf_ele *l2_tn_filter_ptr;
struct ixgbe_fdir_rule_ele *fdir_rule_ptr;
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
struct ixgbe_flow_mem *ixgbe_flow_mem_ptr;
uint8_t first_mask = FALSE;
@@ -3495,6 +3673,32 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
}
}
+ memset(&mirror_conf, 0, sizeof(struct ixgbe_flow_mirror_conf));
+ ret = ixgbe_parse_mirror_filter(dev, attr, pattern,
+ actions, &mirror_conf, error);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "failed to parse mirror filter");
+ goto out;
+ }
+
+ ret = ixgbe_config_mirror_filter_add(dev, &mirror_conf);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "failed to add mirror filter");
+ goto out;
+ }
+
+ mirror_filter_ptr = rte_zmalloc("ixgbe_mirror_filter",
+ sizeof(struct ixgbe_mirror_conf_ele), 0);
+ if (!mirror_filter_ptr) {
+ PMD_DRV_LOG(ERR, "failed to allocate memory");
+ goto out;
+ }
+ mirror_filter_ptr->filter_info = mirror_conf;
+ TAILQ_INSERT_TAIL(&filter_mirror_list,
+ mirror_filter_ptr, entries);
+ flow->rule = mirror_filter_ptr;
+ flow->filter_type = RTE_ETH_FILTER_MIRROR;
+ return flow;
out:
TAILQ_REMOVE(&ixgbe_flow_list,
ixgbe_flow_mem_ptr, entries);
@@ -3586,6 +3790,7 @@ ixgbe_flow_destroy(struct rte_eth_dev *dev,
struct ixgbe_hw_fdir_info *fdir_info =
IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
switch (filter_type) {
case RTE_ETH_FILTER_NTUPLE:
@@ -3665,6 +3870,17 @@ ixgbe_flow_destroy(struct rte_eth_dev *dev,
rte_free(rss_filter_ptr);
}
break;
+ case RTE_ETH_FILTER_MIRROR:
+ mirror_filter_ptr = (struct ixgbe_mirror_conf_ele *)
+ pmd_flow->rule;
+ ret = ixgbe_config_mirror_filter_del(dev,
+ &mirror_filter_ptr->filter_info);
+ if (!ret) {
+ TAILQ_REMOVE(&filter_mirror_list,
+ mirror_filter_ptr, entries);
+ rte_free(mirror_filter_ptr);
+ }
+ break;
default:
PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
filter_type);
@@ -3717,6 +3933,7 @@ ixgbe_flow_flush(struct rte_eth_dev *dev,
}
ixgbe_clear_rss_filter(dev);
+ ixgbe_clear_all_mirror_filter(dev);
ixgbe_filterlist_flush();
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 6/8] net/i40e: add mirror rule config and export add/del rule APIs
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
` (4 preceding siblings ...)
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 5/8] net/ixgbe: use generic flow command to re-realize mirror rule SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 7/8] net/i40e: define the mirror filter paser SimonX Lu
` (2 subsequent siblings)
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
define i40e_mirror_rule_conf structure that is used for set mirror flow
rule to i40e register, and export add/del mirror rule APIs.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 13 +++++--------
drivers/net/i40e/i40e_ethdev.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 943cfe71d..472a642b9 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -332,12 +332,6 @@ static int i40e_dev_sync_phy_type(struct i40e_hw *hw);
static void i40e_configure_registers(struct i40e_hw *hw);
static void i40e_hw_init(struct rte_eth_dev *dev);
static int i40e_config_qinq(struct i40e_hw *hw, struct i40e_vsi *vsi);
-static enum i40e_status_code i40e_aq_del_mirror_rule(struct i40e_hw *hw,
- uint16_t seid,
- uint16_t rule_type,
- uint16_t *entries,
- uint16_t count,
- uint16_t rule_id);
static int i40e_mirror_rule_set(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t sw_id, uint8_t on);
@@ -1744,6 +1738,9 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
/* initialize RSS rule list */
TAILQ_INIT(&pf->rss_config_list);
+ /* initialize mirror filter list */
+ TAILQ_INIT(&pf->mirror_filter_list);
+
/* initialize Traffic Manager configuration */
i40e_tm_conf_init(dev);
@@ -10993,7 +10990,7 @@ i40e_config_qinq(struct i40e_hw *hw, struct i40e_vsi *vsi)
* Add a mirror rule for a given veb.
*
**/
-static enum i40e_status_code
+enum i40e_status_code
i40e_aq_add_mirror_rule(struct i40e_hw *hw,
uint16_t seid, uint16_t dst_id,
uint16_t rule_type, uint16_t *entries,
@@ -11044,7 +11041,7 @@ i40e_aq_add_mirror_rule(struct i40e_hw *hw,
* Delete a mirror rule for a given veb.
*
**/
-static enum i40e_status_code
+enum i40e_status_code
i40e_aq_del_mirror_rule(struct i40e_hw *hw,
uint16_t seid, uint16_t rule_type, uint16_t *entries,
uint16_t count, uint16_t rule_id)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 1466998aa..95c2b4e2c 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -1065,6 +1065,30 @@ struct i40e_rss_filter {
struct i40e_rte_flow_rss_conf rss_filter_info;
};
+/**
+ * Mirror rule configuration
+ */
+struct i40e_mirror_rule_conf {
+ uint8_t rule_type;
+ uint16_t rule_id; /* the rule id assigned by firmware */
+ uint16_t dst_vsi_seid; /* destination vsi for this mirror rule. */
+ uint16_t num_entries;
+ /**
+ * the info stores depend on the rule type.
+ * If type is I40E_MIRROR_TYPE_VLAN, vlan ids are stored here.
+ * If type is I40E_MIRROR_TYPE_VPORT_*, vsi's seid are stored.
+ */
+ uint16_t entries[I40E_MIRROR_MAX_ENTRIES_PER_RULE];
+};
+
+TAILQ_HEAD(i40e_mirror_filter_list, i40e_mirror_filter);
+
+/* Mirror rule list structure */
+struct i40e_mirror_filter {
+ TAILQ_ENTRY(i40e_mirror_filter) next;
+ struct i40e_mirror_rule_conf conf;
+};
+
struct i40e_vf_msg_cfg {
/* maximal VF message during a statistic period */
uint32_t max_msg;
@@ -1135,6 +1159,7 @@ struct i40e_pf {
struct i40e_tunnel_rule tunnel; /* Tunnel filter rule */
struct i40e_rte_flow_rss_conf rss_info; /* RSS info */
struct i40e_rss_conf_list rss_config_list; /* RSS rule list */
+ struct i40e_mirror_filter_list mirror_filter_list;
struct i40e_queue_regions queue_region; /* queue region info */
struct i40e_fc_conf fc_conf; /* Flow control conf */
struct i40e_mirror_rule_list mirror_list;
@@ -1299,6 +1324,7 @@ union i40e_filter_t {
struct rte_eth_tunnel_filter_conf tunnel_filter;
struct i40e_tunnel_filter_conf consistent_tunnel_filter;
struct i40e_rte_flow_rss_conf rss_conf;
+ struct i40e_mirror_rule_conf mirror_conf;
};
typedef int (*parse_filter_t)(struct rte_eth_dev *dev,
@@ -1457,6 +1483,14 @@ int i40e_config_rss_filter(struct i40e_pf *pf,
int i40e_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params);
int i40e_vf_representor_uninit(struct rte_eth_dev *ethdev);
+enum i40e_status_code i40e_aq_add_mirror_rule(struct i40e_hw *hw,
+ uint16_t seid, uint16_t dst_id,
+ uint16_t rule_type, uint16_t *entries,
+ uint16_t count, uint16_t *rule_id);
+enum i40e_status_code i40e_aq_del_mirror_rule(struct i40e_hw *hw,
+ uint16_t seid, uint16_t rule_type, uint16_t *entries,
+ uint16_t count, uint16_t rule_id);
+
#define I40E_DEV_TO_PCI(eth_dev) \
RTE_DEV_TO_PCI((eth_dev)->device)
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 7/8] net/i40e: define the mirror filter paser
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
` (5 preceding siblings ...)
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 6/8] net/i40e: add mirror rule config and export add/del rule APIs SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 8/8] net/i40e: use generic flow command to re-realize mirror rule SimonX Lu
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
define the mirror filter parser, it will divide to two pharse, the one is
mirror attributions pattern parsing, and the mirror config will be filled
in according to pattern type VF/PF/VLAN.
the another is mirror action parsing that the dst_pool of mirror config
will be filled in according to action type VF/PF.
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/i40e/i40e_flow.c | 263 ++++++++++++++++++++++++++++++++++-
1 file changed, 256 insertions(+), 7 deletions(-)
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index adc5da1c5..578a68773 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -1868,15 +1868,18 @@ static struct i40e_valid_pattern i40e_supported_patterns[] = {
{ pattern_fdir_ipv6_sctp, i40e_flow_parse_l4_cloud_filter },
};
-#define NEXT_ITEM_OF_ACTION(act, actions, index) \
- do { \
- act = actions + index; \
- while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
- index++; \
- act = actions + index; \
- } \
+#define NEXT_ITEM_OF_ACTION(act, actions, index) \
+ do { \
+ act = (actions) + (index); \
+ while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
+ (index)++; \
+ act = (actions) + (index); \
+ } \
} while (0)
+#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
+ ((vlan_item) ? ntohs(vlan_item->tci) & 0x0fff : (default_vid))
+
/* Find the first VOID or non-VOID item pointer */
static const struct rte_flow_item *
i40e_find_first_item(const struct rte_flow_item *item, bool is_void)
@@ -5259,6 +5262,252 @@ i40e_config_rss_filter_del(struct rte_eth_dev *dev,
return 0;
}
+static int
+i40e_flow_parse_mirror_attr_pattern(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ struct rte_flow_error *error,
+ union i40e_filter_t *filter)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ const struct rte_flow_item *item = pattern;
+ const struct rte_flow_item *next_item = pattern + 1;
+ enum rte_flow_item_type item_type, next_item_type;
+ const struct rte_flow_item_vf *vf_spec, *vf_mask, *vf_last;
+ const struct rte_flow_item_vlan *vlan_spec, *vlan_mask, *vlan_last;
+ struct i40e_mirror_rule_conf *mirror_config = &filter->mirror_conf;
+ uint16_t *entries = mirror_config->entries;
+ uint8_t *rule_type = &mirror_config->rule_type;
+ uint16_t vf_id, vf_id_last, vlan_id, vlan_id_mask, vlan_id_last;
+ uint16_t i, j = 0, k = 0;
+
+ if (attr->priority) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ attr, "Not support priority.");
+ return -rte_errno;
+ }
+ if (attr->group) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+ if (attr->transfer) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+
+ item_type = item->type;
+ next_item_type = next_item->type;
+ if (!(next_item_type == RTE_FLOW_ITEM_TYPE_END &&
+ (item_type == RTE_FLOW_ITEM_TYPE_PF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VLAN))) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Only support a pattern item that is pf or vf or vlan.");
+ return -rte_errno;
+ }
+
+ if (item_type == RTE_FLOW_ITEM_TYPE_PF) {
+ if (!attr->ingress && attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS;
+ } else if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute for PF mirror.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VF) {
+ if (!attr->ingress && attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VPORT_INGRESS;
+ } else if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VPORT_EGRESS;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute for VF mirror.");
+ return -rte_errno;
+ }
+
+ vf_spec = item->spec;
+ vf_last = item->last;
+ vf_mask = item->mask;
+ if (item->spec || item->last) {
+ vf_id = (vf_spec ? vf_spec->id : 0);
+ vf_id_last = (vf_last ? vf_last->id : vf_id);
+ if (vf_id >= pf->vf_num ||
+ vf_id_last >= pf->vf_num ||
+ vf_id_last < vf_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VF ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vf_id; i <= vf_id_last; i++, k++)
+ if (!vf_mask || (vf_mask->id & (1 << k)))
+ entries[j++] = pf->vfs[i].vsi->seid;
+ mirror_config->num_entries = j;
+ } else if (item->mask) {
+ if (vf_mask->id >= (uint32_t)(1 << pf->vf_num)) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ item,
+ "VF ID mask is out of range.");
+ return -rte_errno;
+ }
+ for (i = 0; i < pf->vf_num; i++) {
+ if (vf_mask->id & (1 << i))
+ entries[j++] = pf->vfs[i].vsi->seid;
+ }
+ mirror_config->num_entries = j;
+ }
+ if (mirror_config->num_entries == 0) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Not valid VF ID.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VLAN;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR, attr,
+ "Only support ingress attribute for VLAN mirror.");
+ return -rte_errno;
+ }
+
+ vlan_spec = item->spec;
+ vlan_last = item->last;
+ vlan_mask = item->mask;
+ if (item->spec || item->last) {
+ vlan_id = GET_VLAN_ID_FROM_TCI(vlan_spec, 0);
+ vlan_id_last = GET_VLAN_ID_FROM_TCI(vlan_last, vlan_id);
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+ if (vlan_id >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last < vlan_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, item,
+ "VLAN ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vlan_id; i <= vlan_id_last; i++, k++)
+ if (vlan_id_mask & (1 << k))
+ entries[j++] = i;
+ mirror_config->num_entries = j;
+ } else if (item->mask) {
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+ for (i = 0, j = 0; i < ETH_MIRROR_MAX_VLANS; i++) {
+ if (vlan_id_mask & (1 << i))
+ entries[j++] = i;
+ mirror_config->num_entries = j;
+ }
+ }
+ if (mirror_config->num_entries == 0) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Not valid VLAN ID.");
+ return -rte_errno;
+ }
+ }
+
+ return 0;
+}
+
+static int
+i40e_flow_parse_mirror_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error,
+ union i40e_filter_t *filter)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ const struct rte_flow_action *act;
+ const struct rte_flow_action_vf *act_q;
+ struct i40e_mirror_rule_conf *mirror_config = &filter->mirror_conf;
+ uint16_t *dst_vsi_seid = &mirror_config->dst_vsi_seid;
+ uint32_t index = 0;
+
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_MIRROR) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Not supported action.");
+ return -rte_errno;
+ }
+
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type == RTE_FLOW_ACTION_TYPE_PF) {
+ *dst_vsi_seid = pf->main_vsi_seid;
+ } else if (act->type == RTE_FLOW_ACTION_TYPE_VF) {
+ act_q = act->conf;
+ if (act_q->id >= pf->vf_num) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid VF ID for mirror action");
+ return -rte_errno;
+ }
+ /* If the dst_pool is equal to vf_num, consider it as PF */
+ if (act_q->id == pf->vf_num)
+ *dst_vsi_seid = pf->main_vsi_seid;
+ else
+ *dst_vsi_seid = pf->vfs[act_q->id].vsi->seid;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support pf or vf parameter item.");
+ return -rte_errno;
+ }
+
+ /* Check if the next non-void item is END */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_END) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support pf or vf parameter item.");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int
+i40e_parse_mirror_filter(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ union i40e_filter_t *filter,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = i40e_flow_parse_mirror_attr_pattern(dev, attr, pattern,
+ error, filter);
+ if (ret)
+ return ret;
+
+ ret = i40e_flow_parse_mirror_action(dev, actions, error, filter);
+ if (ret)
+ return ret;
+
+ cons_filter_type = RTE_ETH_FILTER_MIRROR;
+
+ return 0;
+}
+
static int
i40e_flow_validate(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [PATCH v1 8/8] net/i40e: use generic flow command to re-realize mirror rule
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
` (6 preceding siblings ...)
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 7/8] net/i40e: define the mirror filter paser SimonX Lu
@ 2020-10-14 8:41 ` SimonX Lu
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
8 siblings, 0 replies; 20+ messages in thread
From: SimonX Lu @ 2020-10-14 8:41 UTC (permalink / raw)
To: dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, Simon Lu
From: Simon Lu <simonx.lu@intel.com>
follow mirror rule to add new action called mirror in flow management,
so we can use "flow create * pattern * action mirror *" to replace
old "set port * mirror-rule *" command now
the example of mirror rule command mapping to flow management command:
(in below command, port 0 is PF and port 1-3 is VF):
1) ingress: pf => pf
set port 0 mirror-rule 0 uplink-mirror dst-pool 4 on
or
flow create 0 ingress pattern pf / end actions mirror pf / end
2) egress: pf => pf
set port 0 mirror-rule 0 downlink-mirror dst-pool 4 on
or
flow create 0 egress pattern pf / end actions mirror pf / end
3) ingress: pf => vf 3
set port 0 mirror-rule 0 uplink-mirror dst-pool 3 on
or
flow create 0 ingress pattern pf / end actions mirror vf id 3 / end
4) egress: pf => vf 3
set port 0 mirror-rule 0 downlink-mirror dst-pool 3 on
or
flow create 0 egress pattern pf / end actions mirror vf id 3 / end
5) ingress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 4 on
or
flow create 0 ingress pattern vf id is 0 / end \
actions mirror pf / end
flow create 0 ingress pattern vf id is 1 / end \
actions mirror pf / end
or
flow create 0 ingress pattern vf id last 1 / end \
actions mirror pf / end
or
flow create 0 ingress pattern vf id mask 0x3 / end \
actions mirror pf / end
6) egress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-down 0x3 dst-pool 4 on
or
flow create 0 egress pattern vf id is 0 / end actions mirror pf / end
flow create 0 egress pattern vf id is 1 / end actions mirror pf / end
or
flow create 0 egress pattern vf id last 1 / end actions mirror pf / end
or
flow create 0 egress pattern vf id mask 0x3 / end \
actions mirror pf / end
7) ingress: vf 1,2 => vf 3
set port 0 mirror-rule 0 pool-mirror-up 0x6 dst-pool 3 on
or
flow create 0 ingress pattern vf id is 1 / end \
actions mirror vf id 3 / end
flow create 0 ingress pattern vf id is 2 / end \
actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id is 1 id last 2 / end \
actions mirror vf id 3 / end
or
flow create 0 ingress pattern vf id mask 0x6 / end \
actions mirror vf id 3 / end
8) egress: vf 1,2 => vf 3
set port 0 mirror-rule 0 pool-mirror-down 0x6 dst-pool 3 on
or
flow create 0 egress pattern vf id is 1 / end \
actions mirror vf id 3 / end
flow create 0 egress pattern vf id is 2 / end \
actions mirror vf id 3 / end
or
flow create 0 egress pattern vf id is 1 id last 2 / end \
actions mirror vf id 3 / end
or
flow create 0 egress pattern vf id mask 0x6 / end \
actions mirror vf id 3 / end
9) ingress: vlan 4,6 => vf 3
set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 4 on
or
flow create 0 ingress pattern vlan vid is 4 / end \
actions mirror vf id 3 / end
flow create 0 ingress pattern vlan vid is 6 / end \
actions mirror vf id 3 end
or
flow create 0 ingress pattern vlan vid mask 0x28 / end \
actions mirror vf id 3 / end
or
flow create 0 ingress pattern vlan vid is 4 vid last 6 \
vid mask 0x5 / end actions mirror vf id 3 / end
Signed-off-by: Simon Lu <simonx.lu@intel.com>
---
drivers/net/i40e/i40e_flow.c | 153 +++++++++++++++++++++++++++++++++++
1 file changed, 153 insertions(+)
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index 578a68773..8164903a2 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -116,6 +116,7 @@ static int i40e_flow_flush_fdir_filter(struct i40e_pf *pf);
static int i40e_flow_flush_ethertype_filter(struct i40e_pf *pf);
static int i40e_flow_flush_tunnel_filter(struct i40e_pf *pf);
static int i40e_flow_flush_rss_filter(struct rte_eth_dev *dev);
+static int i40e_flow_flush_mirror_filter(struct rte_eth_dev *dev);
static int
i40e_flow_parse_qinq_filter(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
@@ -5508,6 +5509,104 @@ i40e_parse_mirror_filter(struct rte_eth_dev *dev,
return 0;
}
+static int
+i40e_config_mirror_filter_set(struct rte_eth_dev *dev,
+ struct i40e_mirror_rule_conf *conf)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_mirror_filter *it;
+ struct i40e_mirror_filter *mirror_filter;
+ uint16_t rule_id;
+ int ret;
+
+ if (pf->main_vsi->veb == NULL || pf->vfs == NULL) {
+ PMD_DRV_LOG(ERR,
+ "mirror rule can not be configured without veb or vfs.");
+ return -ENOSYS;
+ }
+ if (pf->nb_mirror_rule > I40E_MAX_MIRROR_RULES) {
+ PMD_DRV_LOG(ERR, "mirror table is full.");
+ return -ENOSPC;
+ }
+
+ TAILQ_FOREACH(it, &pf->mirror_filter_list, next) {
+ if (it->conf.dst_vsi_seid == conf->dst_vsi_seid &&
+ it->conf.rule_type == conf->rule_type &&
+ it->conf.num_entries == conf->num_entries &&
+ !memcmp(it->conf.entries, conf->entries,
+ conf->num_entries * sizeof(conf->entries[0]))) {
+ PMD_DRV_LOG(ERR, "mirror rule exists.");
+ return -EEXIST;
+ }
+ }
+
+ mirror_filter = rte_zmalloc("i40e_mirror_filter",
+ sizeof(*mirror_filter), 0);
+ if (mirror_filter == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to alloc memory.");
+ return -ENOMEM;
+ }
+ mirror_filter->conf = *conf;
+
+ ret = i40e_aq_add_mirror_rule(hw,
+ pf->main_vsi->veb->seid,
+ mirror_filter->conf.dst_vsi_seid,
+ mirror_filter->conf.rule_type,
+ mirror_filter->conf.entries,
+ mirror_filter->conf.num_entries,
+ &rule_id);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR,
+ "failed to add mirror rule: ret = %d, aq_err = %d.",
+ ret, hw->aq.asq_last_status);
+ rte_free(mirror_filter);
+ return -ENOSYS;
+ }
+
+ mirror_filter->conf.rule_id = rule_id;
+
+ pf->nb_mirror_rule++;
+
+ TAILQ_INSERT_TAIL(&pf->mirror_filter_list, mirror_filter, next);
+
+ return 0;
+}
+
+static int
+i40e_config_mirror_filter_del(struct rte_eth_dev *dev,
+ struct i40e_mirror_rule_conf *conf)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_mirror_filter *mirror_filter;
+ void *temp;
+ int ret;
+
+ ret = i40e_aq_del_mirror_rule(hw,
+ pf->main_vsi->veb->seid,
+ conf->rule_type,
+ conf->entries,
+ conf->num_entries,
+ conf->rule_id);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR,
+ "failed to remove mirror rule: ret = %d, aq_err = %d.",
+ ret, hw->aq.asq_last_status);
+ return -ENOSYS;
+ }
+
+ TAILQ_FOREACH_SAFE(mirror_filter, &pf->mirror_filter_list, next, temp) {
+ if (!memcmp(&mirror_filter->conf, conf,
+ sizeof(struct i40e_mirror_rule_conf))) {
+ TAILQ_REMOVE(&pf->mirror_filter_list,
+ mirror_filter, next);
+ rte_free(mirror_filter);
+ }
+ }
+ return 0;
+}
+
static int
i40e_flow_validate(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
@@ -5553,6 +5652,12 @@ i40e_flow_validate(struct rte_eth_dev *dev,
return ret;
}
+ if ((actions + i)->type == RTE_FLOW_ACTION_TYPE_MIRROR) {
+ ret = i40e_parse_mirror_filter(dev, attr, pattern,
+ actions, &cons_filter, error);
+ return ret;
+ }
+
i = 0;
/* Get the non-void item number of pattern */
while ((pattern + i)->type != RTE_FLOW_ITEM_TYPE_END) {
@@ -5672,6 +5777,14 @@ i40e_flow_create(struct rte_eth_dev *dev,
flow->rule = TAILQ_LAST(&pf->rss_config_list,
i40e_rss_conf_list);
break;
+ case RTE_ETH_FILTER_MIRROR:
+ ret = i40e_config_mirror_filter_set(dev,
+ &cons_filter.mirror_conf);
+ if (ret)
+ goto free_flow;
+ flow->rule = TAILQ_LAST(&pf->mirror_filter_list,
+ i40e_mirror_filter_list);
+ break;
default:
goto free_flow;
}
@@ -5726,6 +5839,10 @@ i40e_flow_destroy(struct rte_eth_dev *dev,
ret = i40e_config_rss_filter_del(dev,
&((struct i40e_rss_filter *)flow->rule)->rss_filter_info);
break;
+ case RTE_ETH_FILTER_MIRROR:
+ ret = i40e_config_mirror_filter_del(dev,
+ &((struct i40e_mirror_filter *)flow->rule)->conf);
+ break;
default:
PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
filter_type);
@@ -5880,6 +5997,14 @@ i40e_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
return -rte_errno;
}
+ ret = i40e_flow_flush_mirror_filter(dev);
+ if (ret) {
+ rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
+ "Failed to flush mirror flows.");
+ return -rte_errno;
+ }
+
return ret;
}
@@ -6026,6 +6151,34 @@ i40e_flow_flush_rss_filter(struct rte_eth_dev *dev)
return ret;
}
+/* remove the mirror filter */
+static int
+i40e_flow_flush_mirror_filter(struct rte_eth_dev *dev)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct rte_flow *flow;
+ void *temp;
+ int32_t ret = -EINVAL;
+
+ /* Delete mirror flows in flow list. */
+ TAILQ_FOREACH_SAFE(flow, &pf->flow_list, node, temp) {
+ struct i40e_mirror_filter *rule = flow->rule;
+
+ if (flow->filter_type != RTE_ETH_FILTER_MIRROR)
+ continue;
+
+ if (rule) {
+ ret = i40e_config_mirror_filter_del(dev, &rule->conf);
+ if (ret)
+ return ret;
+ }
+ TAILQ_REMOVE(&pf->flow_list, flow, node);
+ rte_free(flow);
+ }
+
+ return ret;
+}
+
static int
i40e_flow_query(struct rte_eth_dev *dev __rte_unused,
struct rte_flow *flow,
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow SimonX Lu
@ 2020-10-14 12:07 ` Ori Kam
0 siblings, 0 replies; 20+ messages in thread
From: Ori Kam @ 2020-10-14 12:07 UTC (permalink / raw)
To: SimonX Lu, dev; +Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing
Hi Simon,
BSP,
> -----Original Message-----
> From: SimonX Lu <simonx.lu@intel.com>
> Sent: Wednesday, October 14, 2020 11:41 AM
> To: dev@dpdk.org
> Cc: jia.guo@intel.com; haiyue.wang@intel.com; qiming.yang@intel.com;
> beilei.xing@intel.com; Ori Kam <orika@nvidia.com>; Simon Lu
> <simonx.lu@intel.com>
> Subject: [PATCH v1 1/8] ethdev: support the mirror action for flow
>
> From: Simon Lu <simonx.lu@intel.com>
>
> Added the mirror type within rte_filter_type, and defined corresponding
> action & item to support mirror in rte_flow.
>
> Signed-off-by: Simon Lu <simonx.lu@intel.com>
> ---
> lib/librte_ethdev/rte_eth_ctrl.h | 1 +
> lib/librte_ethdev/rte_flow.c | 1 +
> lib/librte_ethdev/rte_flow.h | 7 +++++++
> 3 files changed, 9 insertions(+)
>
Why did you create new action?
There was a new action "sampling" submitted in this release.
When set to 1 it means mirror since all packets will get duplicated
Please review https://patches.dpdk.org/cover/78893/
Thanks,
Ori
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 1/6] net/i40e: add mirror rule config and add/del rule APIs
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
@ 2020-11-03 8:28 ` Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser Steve Yang
` (4 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
Define i40e_mirror_rule_conf structure that is used for set mirror flow
rule to i40e register, and relocate the mirror related MACORs to header
file.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 13 +++++--------
drivers/net/i40e/i40e_ethdev.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index f54769c29..b17c05eda 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -329,12 +329,6 @@ static int i40e_dev_sync_phy_type(struct i40e_hw *hw);
static void i40e_configure_registers(struct i40e_hw *hw);
static void i40e_hw_init(struct rte_eth_dev *dev);
static int i40e_config_qinq(struct i40e_hw *hw, struct i40e_vsi *vsi);
-static enum i40e_status_code i40e_aq_del_mirror_rule(struct i40e_hw *hw,
- uint16_t seid,
- uint16_t rule_type,
- uint16_t *entries,
- uint16_t count,
- uint16_t rule_id);
static int i40e_mirror_rule_set(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t sw_id, uint8_t on);
@@ -1742,6 +1736,9 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
/* initialize RSS rule list */
TAILQ_INIT(&pf->rss_config_list);
+ /* initialize mirror filter list */
+ TAILQ_INIT(&pf->mirror_filter_list);
+
/* initialize Traffic Manager configuration */
i40e_tm_conf_init(dev);
@@ -10223,7 +10220,7 @@ i40e_config_qinq(struct i40e_hw *hw, struct i40e_vsi *vsi)
* Add a mirror rule for a given veb.
*
**/
-static enum i40e_status_code
+enum i40e_status_code
i40e_aq_add_mirror_rule(struct i40e_hw *hw,
uint16_t seid, uint16_t dst_id,
uint16_t rule_type, uint16_t *entries,
@@ -10274,7 +10271,7 @@ i40e_aq_add_mirror_rule(struct i40e_hw *hw,
* Delete a mirror rule for a given veb.
*
**/
-static enum i40e_status_code
+enum i40e_status_code
i40e_aq_del_mirror_rule(struct i40e_hw *hw,
uint16_t seid, uint16_t rule_type, uint16_t *entries,
uint16_t count, uint16_t rule_id)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index ea59a3e60..290a54daa 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -1075,6 +1075,30 @@ struct i40e_rss_filter {
struct i40e_rte_flow_rss_conf rss_filter_info;
};
+/**
+ * Mirror rule configuration
+ */
+struct i40e_mirror_rule_conf {
+ uint8_t rule_type;
+ uint16_t rule_id; /* the rule id assigned by firmware */
+ uint16_t dst_vsi_seid; /* destination vsi for this mirror rule. */
+ uint16_t num_entries;
+ /**
+ * the info stores depend on the rule type.
+ * If type is I40E_MIRROR_TYPE_VLAN, vlan ids are stored here.
+ * If type is I40E_MIRROR_TYPE_VPORT_*, vsi's seid are stored.
+ */
+ uint16_t entries[I40E_MIRROR_MAX_ENTRIES_PER_RULE];
+};
+
+TAILQ_HEAD(i40e_mirror_filter_list, i40e_mirror_filter);
+
+/* Mirror rule list structure */
+struct i40e_mirror_filter {
+ TAILQ_ENTRY(i40e_mirror_filter) next;
+ struct i40e_mirror_rule_conf conf;
+};
+
struct i40e_vf_msg_cfg {
/* maximal VF message during a statistic period */
uint32_t max_msg;
@@ -1145,6 +1169,7 @@ struct i40e_pf {
struct i40e_tunnel_rule tunnel; /* Tunnel filter rule */
struct i40e_rte_flow_rss_conf rss_info; /* RSS info */
struct i40e_rss_conf_list rss_config_list; /* RSS rule list */
+ struct i40e_mirror_filter_list mirror_filter_list;
struct i40e_queue_regions queue_region; /* queue region info */
struct i40e_fc_conf fc_conf; /* Flow control conf */
struct i40e_mirror_rule_list mirror_list;
@@ -1310,6 +1335,7 @@ union i40e_filter_t {
struct rte_eth_tunnel_filter_conf tunnel_filter;
struct i40e_tunnel_filter_conf consistent_tunnel_filter;
struct i40e_rte_flow_rss_conf rss_conf;
+ struct i40e_mirror_rule_conf mirror_conf;
};
typedef int (*parse_filter_t)(struct rte_eth_dev *dev,
@@ -1460,6 +1486,14 @@ int i40e_config_rss_filter(struct i40e_pf *pf,
int i40e_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params);
int i40e_vf_representor_uninit(struct rte_eth_dev *ethdev);
+enum i40e_status_code i40e_aq_add_mirror_rule(struct i40e_hw *hw,
+ uint16_t seid, uint16_t dst_id,
+ uint16_t rule_type, uint16_t *entries,
+ uint16_t count, uint16_t *rule_id);
+enum i40e_status_code i40e_aq_del_mirror_rule(struct i40e_hw *hw,
+ uint16_t seid, uint16_t rule_type, uint16_t *entries,
+ uint16_t count, uint16_t rule_id);
+
#define I40E_DEV_TO_PCI(eth_dev) \
RTE_DEV_TO_PCI((eth_dev)->device)
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 1/6] net/i40e: add mirror rule config and add/del rule APIs Steve Yang
@ 2020-11-03 8:28 ` Steve Yang
2021-02-18 18:59 ` Thomas Monjalon
2021-02-19 12:56 ` Ferruh Yigit
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 3/6] net/i40e: use generic flow command to re-realize mirror rule Steve Yang
` (3 subsequent siblings)
5 siblings, 2 replies; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
Define the sample filter parser for mirror, it will divide to two phases,
the one is sample attributions pattern parsing, and the mirror config
will be filled in according to pattern type VF/PF/VLAN when sample ratio
is 1.
The another is sample action parsing that the port id of mirror config
will be filled in according to action type VF/PF.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/i40e/i40e_flow.c | 264 +++++++++++++++++++++++++-
lib/librte_ethdev/rte_ethdev_driver.h | 1 +
2 files changed, 258 insertions(+), 7 deletions(-)
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index 5bec0c7a8..7928871bf 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -1871,15 +1871,18 @@ static struct i40e_valid_pattern i40e_supported_patterns[] = {
{ pattern_fdir_ipv6_sctp, i40e_flow_parse_l4_cloud_filter },
};
-#define NEXT_ITEM_OF_ACTION(act, actions, index) \
- do { \
- act = actions + index; \
- while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
- index++; \
- act = actions + index; \
- } \
+#define NEXT_ITEM_OF_ACTION(act, actions, index) \
+ do { \
+ act = (actions) + (index); \
+ while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
+ (index)++; \
+ act = (actions) + (index); \
+ } \
} while (0)
+#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
+ ((vlan_item) ? ntohs(vlan_item->tci) & 0x0fff : (default_vid))
+
/* Find the first VOID or non-VOID item pointer */
static const struct rte_flow_item *
i40e_find_first_item(const struct rte_flow_item *item, bool is_void)
@@ -5267,6 +5270,253 @@ i40e_config_rss_filter_del(struct rte_eth_dev *dev,
return 0;
}
+static int
+i40e_flow_parse_sample_attr_pattern(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ struct rte_flow_error *error,
+ union i40e_filter_t *filter)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ const struct rte_flow_item *item = pattern;
+ const struct rte_flow_item *next_item = pattern + 1;
+ enum rte_flow_item_type item_type, next_item_type;
+ const struct rte_flow_item_vf *vf_spec, *vf_mask, *vf_last;
+ const struct rte_flow_item_vlan *vlan_spec, *vlan_mask, *vlan_last;
+ struct i40e_mirror_rule_conf *mirror_config = &filter->mirror_conf;
+ uint16_t *entries = mirror_config->entries;
+ uint8_t *rule_type = &mirror_config->rule_type;
+ uint16_t vf_id, vf_id_last, vlan_id, vlan_id_mask, vlan_id_last;
+ uint16_t i, j = 0, k = 0;
+
+ if (attr->priority) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ attr, "Not support priority.");
+ return -rte_errno;
+ }
+ if (attr->group) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+ if (attr->transfer) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+
+ item_type = item->type;
+ next_item_type = next_item->type;
+ if (!(next_item_type == RTE_FLOW_ITEM_TYPE_END &&
+ (item_type == RTE_FLOW_ITEM_TYPE_PF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VLAN))) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Only support a pattern item that is pf or vf or vlan.");
+ return -rte_errno;
+ }
+
+ if (item_type == RTE_FLOW_ITEM_TYPE_PF) {
+ if (!attr->ingress && attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS;
+ } else if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute for PF mirror.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VF) {
+ if (!attr->ingress && attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VPORT_INGRESS;
+ } else if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VPORT_EGRESS;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute for VF mirror.");
+ return -rte_errno;
+ }
+
+ vf_spec = item->spec;
+ vf_last = item->last;
+ vf_mask = item->mask;
+ if (item->spec || item->last) {
+ vf_id = (vf_spec ? vf_spec->id : 0);
+ vf_id_last = (vf_last ? vf_last->id : vf_id);
+ if (vf_id >= pf->vf_num ||
+ vf_id_last >= pf->vf_num ||
+ vf_id_last < vf_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VF ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vf_id; i <= vf_id_last; i++, k++)
+ if (!vf_mask || (vf_mask->id & (1 << k)))
+ entries[j++] = pf->vfs[i].vsi->seid;
+ mirror_config->num_entries = j;
+ } else if (item->mask) {
+ if (vf_mask->id >= (uint32_t)(1 << pf->vf_num)) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ item,
+ "VF ID mask is out of range.");
+ return -rte_errno;
+ }
+ for (i = 0; i < pf->vf_num; i++) {
+ if (vf_mask->id & (1 << i))
+ entries[j++] = pf->vfs[i].vsi->seid;
+ }
+ mirror_config->num_entries = j;
+ }
+ if (mirror_config->num_entries == 0) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Not valid VF ID.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ if (attr->ingress && !attr->egress) {
+ *rule_type = I40E_AQC_MIRROR_RULE_TYPE_VLAN;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR, attr,
+ "Only support ingress attribute for VLAN mirror.");
+ return -rte_errno;
+ }
+
+ vlan_spec = item->spec;
+ vlan_last = item->last;
+ vlan_mask = item->mask;
+ if (item->spec || item->last) {
+ vlan_id = GET_VLAN_ID_FROM_TCI(vlan_spec, 0);
+ vlan_id_last = GET_VLAN_ID_FROM_TCI(vlan_last, vlan_id);
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+ if (vlan_id >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last < vlan_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, item,
+ "VLAN ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vlan_id; i <= vlan_id_last; i++, k++)
+ if (vlan_id_mask & (1 << k))
+ entries[j++] = i;
+ mirror_config->num_entries = j;
+ } else if (item->mask) {
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+ for (i = 0, j = 0; i < ETH_MIRROR_MAX_VLANS; i++) {
+ if (vlan_id_mask & (1 << i))
+ entries[j++] = i;
+ mirror_config->num_entries = j;
+ }
+ }
+ if (mirror_config->num_entries == 0) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Not valid VLAN ID.");
+ return -rte_errno;
+ }
+ }
+
+ return 0;
+}
+
+static int
+i40e_flow_parse_sample_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error,
+ union i40e_filter_t *filter)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ const struct rte_flow_action *act;
+ struct i40e_mirror_rule_conf *mirror_config = &filter->mirror_conf;
+ uint16_t *dst_vsi_seid = &mirror_config->dst_vsi_seid;
+ uint32_t index = 0;
+
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_SAMPLE) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Not supported action.");
+ return -rte_errno;
+ }
+
+ if (((const struct rte_flow_action_sample *)act->conf)->ratio != 1) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid ratio for mirror action");
+ return -rte_errno;
+ }
+
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+
+ if (act->type == RTE_FLOW_ACTION_TYPE_PORT_ID) {
+ const struct rte_flow_action_port_id *conf =
+ (const struct rte_flow_action_port_id *)act->conf;
+
+ if (!conf->id) {
+ *dst_vsi_seid = pf->main_vsi_seid;
+ } else if (conf->id <= pf->vf_num) {
+ *dst_vsi_seid = pf->vfs[conf->id - 1].vsi->seid;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid port id mirror action");
+ return -rte_errno;
+ }
+ }
+
+ /* Check if the next non-void item is END */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_END) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support pf or vf parameter item.");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int
+i40e_parse_sample_filter(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ union i40e_filter_t *filter,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = i40e_flow_parse_sample_attr_pattern(dev, attr, pattern,
+ error, filter);
+ if (ret)
+ return ret;
+
+ ret = i40e_flow_parse_sample_action(dev, actions, error, filter);
+ if (ret)
+ return ret;
+
+ cons_filter_type = RTE_ETH_FILTER_SAMPLE;
+
+ return 0;
+}
+
static int
i40e_flow_validate(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
index 0eacfd842..9c45124d5 100644
--- a/lib/librte_ethdev/rte_ethdev_driver.h
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -477,6 +477,7 @@ enum rte_filter_type {
RTE_ETH_FILTER_TUNNEL,
RTE_ETH_FILTER_FDIR,
RTE_ETH_FILTER_HASH,
+ RTE_ETH_FILTER_SAMPLE,
RTE_ETH_FILTER_L2_TUNNEL,
RTE_ETH_FILTER_GENERIC,
};
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 3/6] net/i40e: use generic flow command to re-realize mirror rule
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 1/6] net/i40e: add mirror rule config and add/del rule APIs Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser Steve Yang
@ 2020-11-03 8:28 ` Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 4/6] net/ixgbe: add mirror rule config and add/del rule APIs Steve Yang
` (2 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
When set follow sample rule's ratio equal to one, its behavior is same
as mirror-rule, so we can use "flow create * pattern * actions sample *"
to replace old "set port * mirror-rule *" command now.
The example of mirror rule command mapping to flow management command:
(in below command, port 0 is PF and port 1-2 is VF):
1): Ingress pf => pf
set port 0 mirror-rule 0 uplink-mirror dst-pool 2 on
or
flow create 0 ingress pattern pf / end \
actions sample ratio 1 / port_id id 0 / end
2): Egress pf => pf
set port 0 mirror-rule 0 downlink-mirror dst-pool 2 on
or
flow create 0 egress pattern pf / end \
actions sample ratio 1 / port_id id 0 / end
3): ingress pf => vf 1
set port 0 mirror-rule 0 uplink-mirror dst-pool 1 on
or
flow create 0 ingress pattern pf / end \
actions sample ratio 1 / port_id id 2 / end
4): egress pf => vf 1
set port 0 mirror-rule 0 downlink-mirror dst-pool 1 on
or
flow create 0 egress pattern pf / end \
actions sample ratio 1 / port_id id 2 / end
5): ingress vf 0 1 => pf
set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 2 on
or
flow create 0 ingress pattern vf id is 1 / end \
actions sample ratio 1 / port_id id 0 / end
flow create 0 ingress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 0 / end
or
flow create 0 ingress pattern vf id last 1 / end \
actions sample ratio 1 / port_id id 0 / end
6): egress vf 0 1 => pf
set port 0 mirror-rule 0 pool-mirror-down 0x3 dst-pool 2 on
or
flow create 0 egress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 0 / end
flow create 0 egress pattern vf id is 1 / end \
actions sample ratio 1 / port_id id 0 / end
or
flow create 0 egress pattern vf id last 1 / end \
actions sample ratio 1 / port_id id 0 / end
7): ingress vf 0 => vf 1
set port 0 mirror-rule 0 pool-mirror-up 0x1 dst-pool 1 on
or
flow create 0 ingress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 2 / end
8): egress vf 0 => vf 1
set port 0 mirror-rule 0 pool-mirror-down 0x1 dst-pool 1 on
or
flow create 0 egress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 2 / end
9): ingress vlan 4,6 => vf 1
set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 1 on
or
flow create 0 ingress pattern vlan vid is 4 / end \
actions sample ratio 1 / port_id id 2 / end
flow create 0 ingress pattern vlan vid is 6 / end \
actions sample ratio 1 / port_id id 2 / end
or
flow create 0 ingress pattern vlan vid is 4 vid last 6 \
vid mask 0x5 / end \
actions sample ratio 1 / port_id id 2 / end
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/i40e/i40e_flow.c | 153 +++++++++++++++++++++++++++++++++++
1 file changed, 153 insertions(+)
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index 7928871bf..d6c95415c 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -119,6 +119,7 @@ static int i40e_flow_flush_fdir_filter(struct i40e_pf *pf);
static int i40e_flow_flush_ethertype_filter(struct i40e_pf *pf);
static int i40e_flow_flush_tunnel_filter(struct i40e_pf *pf);
static int i40e_flow_flush_rss_filter(struct rte_eth_dev *dev);
+static int i40e_flow_flush_sample_filter(struct rte_eth_dev *dev);
static int
i40e_flow_parse_qinq_filter(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
@@ -5517,6 +5518,104 @@ i40e_parse_sample_filter(struct rte_eth_dev *dev,
return 0;
}
+static int
+i40e_config_sample_filter_set(struct rte_eth_dev *dev,
+ struct i40e_mirror_rule_conf *conf)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_mirror_filter *it;
+ struct i40e_mirror_filter *mirror_filter;
+ uint16_t rule_id;
+ int ret;
+
+ if (pf->main_vsi->veb == NULL || pf->vfs == NULL) {
+ PMD_DRV_LOG(ERR,
+ "mirror rule can not be configured without veb or vfs.");
+ return -ENOSYS;
+ }
+ if (pf->nb_mirror_rule > I40E_MAX_MIRROR_RULES) {
+ PMD_DRV_LOG(ERR, "mirror table is full.");
+ return -ENOSPC;
+ }
+
+ TAILQ_FOREACH(it, &pf->mirror_filter_list, next) {
+ if (it->conf.dst_vsi_seid == conf->dst_vsi_seid &&
+ it->conf.rule_type == conf->rule_type &&
+ it->conf.num_entries == conf->num_entries &&
+ !memcmp(it->conf.entries, conf->entries,
+ conf->num_entries * sizeof(conf->entries[0]))) {
+ PMD_DRV_LOG(ERR, "mirror rule exists.");
+ return -EEXIST;
+ }
+ }
+
+ mirror_filter = rte_zmalloc("i40e_mirror_filter",
+ sizeof(*mirror_filter), 0);
+ if (mirror_filter == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to alloc memory.");
+ return -ENOMEM;
+ }
+ mirror_filter->conf = *conf;
+
+ ret = i40e_aq_add_mirror_rule(hw,
+ pf->main_vsi->veb->seid,
+ mirror_filter->conf.dst_vsi_seid,
+ mirror_filter->conf.rule_type,
+ mirror_filter->conf.entries,
+ mirror_filter->conf.num_entries,
+ &rule_id);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR,
+ "failed to add mirror rule: ret = %d, aq_err = %d.",
+ ret, hw->aq.asq_last_status);
+ rte_free(mirror_filter);
+ return -ENOSYS;
+ }
+
+ mirror_filter->conf.rule_id = rule_id;
+
+ pf->nb_mirror_rule++;
+
+ TAILQ_INSERT_TAIL(&pf->mirror_filter_list, mirror_filter, next);
+
+ return 0;
+}
+
+static int
+i40e_config_sample_filter_del(struct rte_eth_dev *dev,
+ struct i40e_mirror_rule_conf *conf)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_mirror_filter *mirror_filter;
+ void *temp;
+ int ret;
+
+ ret = i40e_aq_del_mirror_rule(hw,
+ pf->main_vsi->veb->seid,
+ conf->rule_type,
+ conf->entries,
+ conf->num_entries,
+ conf->rule_id);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR,
+ "failed to remove mirror rule: ret = %d, aq_err = %d.",
+ ret, hw->aq.asq_last_status);
+ return -ENOSYS;
+ }
+
+ TAILQ_FOREACH_SAFE(mirror_filter, &pf->mirror_filter_list, next, temp) {
+ if (!memcmp(&mirror_filter->conf, conf,
+ sizeof(struct i40e_mirror_rule_conf))) {
+ TAILQ_REMOVE(&pf->mirror_filter_list,
+ mirror_filter, next);
+ rte_free(mirror_filter);
+ }
+ }
+ return 0;
+}
+
static int
i40e_flow_validate(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
@@ -5562,6 +5661,12 @@ i40e_flow_validate(struct rte_eth_dev *dev,
return ret;
}
+ if ((actions + i)->type == RTE_FLOW_ACTION_TYPE_SAMPLE) {
+ ret = i40e_parse_sample_filter(dev, attr, pattern,
+ actions, &cons_filter, error);
+ return ret;
+ }
+
i = 0;
/* Get the non-void item number of pattern */
while ((pattern + i)->type != RTE_FLOW_ITEM_TYPE_END) {
@@ -5681,6 +5786,14 @@ i40e_flow_create(struct rte_eth_dev *dev,
flow->rule = TAILQ_LAST(&pf->rss_config_list,
i40e_rss_conf_list);
break;
+ case RTE_ETH_FILTER_SAMPLE:
+ ret = i40e_config_sample_filter_set(dev,
+ &cons_filter.mirror_conf);
+ if (ret)
+ goto free_flow;
+ flow->rule = TAILQ_LAST(&pf->mirror_filter_list,
+ i40e_mirror_filter_list);
+ break;
default:
goto free_flow;
}
@@ -5735,6 +5848,10 @@ i40e_flow_destroy(struct rte_eth_dev *dev,
ret = i40e_config_rss_filter_del(dev,
&((struct i40e_rss_filter *)flow->rule)->rss_filter_info);
break;
+ case RTE_ETH_FILTER_SAMPLE:
+ ret = i40e_config_sample_filter_del(dev,
+ &((struct i40e_mirror_filter *)flow->rule)->conf);
+ break;
default:
PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
filter_type);
@@ -5889,6 +6006,14 @@ i40e_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
return -rte_errno;
}
+ ret = i40e_flow_flush_sample_filter(dev);
+ if (ret) {
+ rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_HANDLE, NULL,
+ "Failed to flush mirror flows.");
+ return -rte_errno;
+ }
+
return ret;
}
@@ -6035,6 +6160,34 @@ i40e_flow_flush_rss_filter(struct rte_eth_dev *dev)
return ret;
}
+/* remove the mirror filter */
+static int
+i40e_flow_flush_sample_filter(struct rte_eth_dev *dev)
+{
+ struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct rte_flow *flow;
+ void *temp;
+ int32_t ret = -EINVAL;
+
+ /* Delete mirror flows in flow list. */
+ TAILQ_FOREACH_SAFE(flow, &pf->flow_list, node, temp) {
+ struct i40e_mirror_filter *rule = flow->rule;
+
+ if (flow->filter_type != RTE_ETH_FILTER_SAMPLE)
+ continue;
+
+ if (rule) {
+ ret = i40e_config_sample_filter_del(dev, &rule->conf);
+ if (ret)
+ return ret;
+ }
+ TAILQ_REMOVE(&pf->flow_list, flow, node);
+ rte_free(flow);
+ }
+
+ return ret;
+}
+
static int
i40e_flow_query(struct rte_eth_dev *dev __rte_unused,
struct rte_flow *flow,
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 4/6] net/ixgbe: add mirror rule config and add/del rule APIs
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
` (2 preceding siblings ...)
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 3/6] net/i40e: use generic flow command to re-realize mirror rule Steve Yang
@ 2020-11-03 8:28 ` Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule Steve Yang
5 siblings, 0 replies; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
Define ixgbe_flow_mirror_conf structure that is used for set mirror flow
rule to ixgbe register, and relocate the mirror related MACORs to header
file.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 8 -----
drivers/net/ixgbe/ixgbe_ethdev.h | 54 ++++++++++++++++++++++++++++++--
2 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 9a47a8b26..cc07b0e31 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5724,14 +5724,6 @@ ixgbe_convert_vm_rx_mask_to_val(uint16_t rx_mask, uint32_t orig_val)
return new_val;
}
-#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
-#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
-#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */
-#define IXGBE_MRCTL_VLME 0x08 /* VLAN Mirroring. */
-#define IXGBE_INVALID_MIRROR_TYPE(mirror_type) \
- ((mirror_type) & ~(uint8_t)(ETH_MIRROR_VIRTUAL_POOL_UP | \
- ETH_MIRROR_UPLINK_PORT | ETH_MIRROR_DOWNLINK_PORT | ETH_MIRROR_VLAN))
-
static int
ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
struct rte_eth_mirror_conf *mirror_conf,
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 3d35ea791..db95a53f1 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -216,6 +216,27 @@ struct ixgbe_rte_flow_rss_conf {
uint16_t queue[IXGBE_MAX_RX_QUEUE_NUM]; /**< Queues indices to use. */
};
+#define IXGBE_MAX_MIRROR_RULES 4 /* Maximum nb. of mirror rules. */
+#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
+#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
+#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */
+#define IXGBE_MRCTL_VLME 0x08 /* VLAN Mirroring. */
+#define IXGBE_INVALID_MIRROR_TYPE(mirror_type) \
+ ((mirror_type) & ~(uint8_t)(ETH_MIRROR_VIRTUAL_POOL_UP |\
+ ETH_MIRROR_UPLINK_PORT | \
+ ETH_MIRROR_DOWNLINK_PORT | \
+ ETH_MIRROR_VLAN))
+
+struct ixgbe_flow_mirror_conf {
+ uint8_t rule_type;
+ uint16_t rule_id;
+ uint8_t dst_pool; /* Destination pool for this mirror rule. */
+ uint64_t pool_mask; /* Bitmap of pool for virtual pool mirroring */
+ uint64_t vlan_mask; /* mask for valid VLAN ID. */
+ /* VLAN ID list for vlan mirroring. */
+ uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
+};
+
/* structure for interrupt relative data */
struct ixgbe_interrupt {
uint32_t flags;
@@ -250,8 +271,6 @@ struct ixgbe_uta_info {
uint32_t uta_shadow[IXGBE_MAX_UTA];
};
-#define IXGBE_MAX_MIRROR_RULES 4 /* Maximum nb. of mirror rules. */
-
struct ixgbe_mirror_info {
struct rte_eth_mirror_conf mr_conf[IXGBE_MAX_MIRROR_RULES];
/**< store PF mirror rules configuration*/
@@ -337,6 +356,8 @@ struct ixgbe_filter_info {
uint32_t syn_info;
/* store the rss filter info */
struct ixgbe_rte_flow_rss_conf rss_info;
+ uint8_t mirror_mask; /* Bit mask for every used mirror filter */
+ struct ixgbe_flow_mirror_conf mirror_filters[IXGBE_MAX_MIRROR_RULES];
};
struct ixgbe_l2_tn_key {
@@ -830,4 +851,33 @@ ixgbe_ethertype_filter_remove(struct ixgbe_filter_info *filter_info,
return idx;
}
+static inline int8_t
+ixgbe_mirror_filter_insert(struct ixgbe_filter_info *filter_info,
+ struct ixgbe_flow_mirror_conf *mirror_conf)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_MAX_MIRROR_RULES; i++) {
+ if (!(filter_info->mirror_mask & (1 << i))) {
+ filter_info->mirror_mask |= 1 << i;
+ mirror_conf->rule_id = i;
+ filter_info->mirror_filters[i] = *mirror_conf;
+ return i;
+ }
+ }
+ return -1;
+}
+
+static inline int
+ixgbe_mirror_filter_remove(struct ixgbe_filter_info *filter_info,
+ uint8_t idx)
+{
+ if (idx >= IXGBE_MAX_MIRROR_RULES)
+ return -1;
+ filter_info->mirror_mask &= ~(1 << idx);
+ memset(&filter_info->mirror_filters[idx], 0,
+ sizeof(filter_info->mirror_filters[0]));
+ return idx;
+}
+
#endif /* _IXGBE_ETHDEV_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
` (3 preceding siblings ...)
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 4/6] net/ixgbe: add mirror rule config and add/del rule APIs Steve Yang
@ 2020-11-03 8:28 ` Steve Yang
2021-02-19 12:57 ` Ferruh Yigit
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule Steve Yang
5 siblings, 1 reply; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
Define the sample filter parser for mirror, it will divide to two phases,
the one is sample attributions pattern parsing, and the mirror config
will be filled in according to pattern type VF/PF/VLAN when sample ratio
is 1.
The another is sample action parsing that the port id of mirror config
will be filled in according to action type VF/PF.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/ixgbe/ixgbe_flow.c | 245 +++++++++++++++++++++++++++++++++
1 file changed, 245 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
index dff04c462..0ad49ca48 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -49,6 +49,18 @@
#define IXGBE_MAX_N_TUPLE_PRIO 7
#define IXGBE_MAX_FLX_SOURCE_OFF 62
+#define NEXT_ITEM_OF_ACTION(act, actions, index) \
+ do { \
+ act = (actions) + (index); \
+ while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
+ (index)++; \
+ act = (actions) + (index); \
+ } \
+ } while (0)
+
+#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
+ ((vlan_item) ? ntohs((vlan_item)->tci) & 0x0fff : (default_vid))
+
/* ntuple filter list structure */
struct ixgbe_ntuple_filter_ele {
TAILQ_ENTRY(ixgbe_ntuple_filter_ele) entries;
@@ -79,6 +91,11 @@ struct ixgbe_rss_conf_ele {
TAILQ_ENTRY(ixgbe_rss_conf_ele) entries;
struct ixgbe_rte_flow_rss_conf filter_info;
};
+/* rss filter list structure */
+struct ixgbe_mirror_conf_ele {
+ TAILQ_ENTRY(ixgbe_mirror_conf_ele) entries;
+ struct ixgbe_flow_mirror_conf filter_info;
+};
/* ixgbe_flow memory list structure */
struct ixgbe_flow_mem {
TAILQ_ENTRY(ixgbe_flow_mem) entries;
@@ -91,6 +108,7 @@ TAILQ_HEAD(ixgbe_syn_filter_list, ixgbe_eth_syn_filter_ele);
TAILQ_HEAD(ixgbe_fdir_rule_filter_list, ixgbe_fdir_rule_ele);
TAILQ_HEAD(ixgbe_l2_tunnel_filter_list, ixgbe_eth_l2_tunnel_conf_ele);
TAILQ_HEAD(ixgbe_rss_filter_list, ixgbe_rss_conf_ele);
+TAILQ_HEAD(ixgbe_mirror_filter_list, ixgbe_mirror_conf_ele);
TAILQ_HEAD(ixgbe_flow_mem_list, ixgbe_flow_mem);
static struct ixgbe_ntuple_filter_list filter_ntuple_list;
@@ -2931,6 +2949,233 @@ ixgbe_clear_rss_filter(struct rte_eth_dev *dev)
ixgbe_config_rss_filter(dev, &filter_info->rss_info, FALSE);
}
+static int
+ixgbe_flow_parse_sample_attr_pattern(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ struct rte_flow_error *error,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ const struct rte_flow_item *item = pattern;
+ const struct rte_flow_item *next_item = pattern + 1;
+ enum rte_flow_item_type item_type, next_item_type;
+ const struct rte_flow_item_vf *vf_spec, *vf_mask, *vf_last;
+ const struct rte_flow_item_vlan *vlan_spec, *vlan_mask, *vlan_last;
+ struct ixgbe_flow_mirror_conf *mirror_config = conf;
+ uint16_t vf_id, vf_id_last;
+ uint16_t vlan_id, vlan_id_mask, vlan_id_last;
+ uint16_t i, j = 0, k = 0;
+
+ if (attr->priority) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ attr, "Not support priority.");
+ return -rte_errno;
+ }
+ if (attr->group) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+ if (attr->transfer) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ attr, "Not support group.");
+ return -rte_errno;
+ }
+
+ item_type = item->type;
+ next_item_type = next_item->type;
+ if (!(next_item_type == RTE_FLOW_ITEM_TYPE_END &&
+ (item_type == RTE_FLOW_ITEM_TYPE_PF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VF ||
+ item_type == RTE_FLOW_ITEM_TYPE_VLAN))) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Only support pf or vf or vlan pattern.");
+ return -rte_errno;
+ }
+ if (item_type == RTE_FLOW_ITEM_TYPE_PF) {
+ if (!attr->ingress && attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_DPME;
+ } else if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_UPME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress or egress attribute PF mirror.");
+ return -rte_errno;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VF) {
+ if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_VPME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress attribute for VF mirror.");
+ return -rte_errno;
+ }
+
+ vf_spec = item->spec;
+ vf_last = item->last;
+ vf_mask = item->mask;
+ if (item->spec || item->last) {
+ vf_id = (vf_spec ? vf_spec->id : 0);
+ vf_id_last = (vf_last ? vf_last->id : vf_id);
+ if (vf_id >= pci_dev->max_vfs ||
+ vf_id_last >= pci_dev->max_vfs ||
+ vf_id_last < vf_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VF ID is out of range.");
+ return -rte_errno;
+ }
+ mirror_config->pool_mask = 0;
+ for (i = vf_id, k = 0; i <= vf_id_last; i++, k++)
+ if (!vf_mask || (vf_mask->id & (1 << k)))
+ mirror_config->pool_mask |= (1ULL << i);
+ } else if (item->mask) {
+ if (vf_mask->id >= (uint32_t)(1 << pci_dev->max_vfs)) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ item,
+ "VF ID mask is out of range.");
+ return -rte_errno;
+ }
+ mirror_config->pool_mask = vf_mask->id;
+ }
+ } else if (item_type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ if (attr->ingress && !attr->egress) {
+ mirror_config->rule_type = IXGBE_MRCTL_VLME;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ATTR,
+ attr,
+ "Only support ingress attribute for VLAN mirror.");
+ return -rte_errno;
+ }
+
+ vlan_spec = item->spec;
+ vlan_last = item->last;
+ vlan_mask = item->mask;
+ if (item->spec || item->last) {
+ vlan_id = GET_VLAN_ID_FROM_TCI(vlan_spec, 0);
+ vlan_id_last = GET_VLAN_ID_FROM_TCI(vlan_last, vlan_id);
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0x0fff);
+
+ if (vlan_id >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last >= ETH_MIRROR_MAX_VLANS ||
+ vlan_id_last < vlan_id) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item,
+ "VLAN ID is out of range.");
+ return -rte_errno;
+ }
+ for (i = vlan_id; i <= vlan_id_last; i++, k++)
+ if (vlan_id_mask & (1 << k))
+ mirror_config->vlan_id[j++] = i;
+
+ mirror_config->vlan_mask = (1 << j) - 1;
+ } else if (item->mask) {
+ vlan_id_mask = GET_VLAN_ID_FROM_TCI(vlan_mask, 0);
+ for (i = 0; i < ETH_MIRROR_MAX_VLANS; i++) {
+ if (vlan_id_mask & (1 << i))
+ mirror_config->vlan_id[j++] = i;
+ }
+ mirror_config->vlan_mask = (1 << j) - 1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+ixgbe_flow_parse_sample_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ const struct rte_flow_action *act;
+ const struct rte_flow_action_vf *act_q;
+ struct ixgbe_flow_mirror_conf *mirror_config = conf;
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint32_t index = 0;
+
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_SAMPLE) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Not supported parameter.");
+ return -rte_errno;
+ }
+
+ if (((const struct rte_flow_action_sample *)act->conf)->ratio != 1) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid ratio for mirror action");
+ return -rte_errno;
+ }
+
+ /* When ratio equal to one, it's behavior is same as mirror rule. */
+ /* Just support mirror behavior */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type == RTE_FLOW_ACTION_TYPE_PORT_ID) {
+ act_q = act->conf;
+ if (!act_q->id) {
+ mirror_config->dst_pool = pci_dev->max_vfs;
+ } else if (act_q->id <= pci_dev->max_vfs) {
+ act_q = act->conf;
+ mirror_config->dst_pool = act_q->id - 1;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
+ "Invalid port id mirror action");
+ return -rte_errno;
+ }
+ }
+
+ /* Check if the next non-void item is END */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_END) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, act,
+ "Only support a action item that is pf or vf.");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int
+ixgbe_parse_sample_filter(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct ixgbe_flow_mirror_conf *conf,
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = ixgbe_flow_parse_sample_attr_pattern(dev,
+ attr,
+ pattern,
+ error,
+ conf);
+ if (ret)
+ return ret;
+
+ return ixgbe_flow_parse_sample_action(dev, actions, error, conf);
+}
+
void
ixgbe_filterlist_init(void)
{
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
` (4 preceding siblings ...)
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser Steve Yang
@ 2020-11-03 8:28 ` Steve Yang
2021-02-19 12:59 ` Ferruh Yigit
5 siblings, 1 reply; 20+ messages in thread
From: Steve Yang @ 2020-11-03 8:28 UTC (permalink / raw)
To: dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, Steve Yang
When set follow sample rule's ratio equal to one, its behavior is same
as mirror-rule, so we can use "flow create * pattern * actions sample *"
to replace old "set port * mirror-rule *" command now.
The example of mirror rule command mapping to flow management command:
(in below command, port 0 is PF and port 1-2 is VF):
1) ingress: pf => pf
set port 0 mirror-rule 0 uplink-mirror dst-pool 2 on
or
flow create 0 ingress pattern pf / end \
actions sample ratio 1 / port_id id 0 / end
2) egress: pf => pf
set port 0 mirror-rule 0 downlink-mirror dst-pool 2 on
or
flow create 0 egress pattern pf / end \
actions sample ratio 1 / port_id id 0 / end
3) ingress: pf => vf 2
set port 0 mirror-rule 0 uplink-mirror dst-pool 1 on
or
flow create 0 ingress pattern pf / end \
actions sample ratio 1 / port_id id 2 / end
4) egress: pf => vf 2
set port 0 mirror-rule 0 downlink-mirror dst-pool 1 on
or
flow create 0 egress pattern pf / end \
actions sample ratio 1 / port_id id 2 / end
5) ingress: vf 0,1 => pf
set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 2 on
or
flow create 0 ingress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 0 / end
flow create 0 ingress pattern vf id is 1 / end \
actions sample ratio 1 / port_id id 0 / end
6) ingress: vf 0 => vf 1
set port 0 mirror-rule 0 pool-mirror-up 0x1 dst-pool 1 on
or
flow create 0 ingress pattern vf id is 0 / end \
actions sample ratio 1 / port_id id 2 / end
7) ingress: vlan 4,6 => vf 1
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 1 on
or
rx_vlan add 4 port 0 vf 0xf
rx_vlan add 6 port 0 vf 0xf
flow create 0 ingress pattern vlan vid is 4 / end \
actions sample ratio 1 / port_id id 2 / end
flow create 0 ingress pattern vlan vid is 6 / end \
actions sample ratio 1 / port_id id 2 / end
Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
drivers/net/ixgbe/ixgbe_flow.c | 228 +++++++++++++++++++++++++++++++++
1 file changed, 228 insertions(+)
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
index 0ad49ca48..5635bf585 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -117,6 +117,7 @@ static struct ixgbe_syn_filter_list filter_syn_list;
static struct ixgbe_fdir_rule_filter_list filter_fdir_list;
static struct ixgbe_l2_tunnel_filter_list filter_l2_tunnel_list;
static struct ixgbe_rss_filter_list filter_rss_list;
+static struct ixgbe_mirror_filter_list filter_mirror_list;
static struct ixgbe_flow_mem_list ixgbe_flow_list;
/**
@@ -3176,6 +3177,185 @@ ixgbe_parse_sample_filter(struct rte_eth_dev *dev,
return ixgbe_flow_parse_sample_action(dev, actions, error, conf);
}
+static int
+ixgbe_config_mirror_filter_add(struct rte_eth_dev *dev,
+ struct ixgbe_flow_mirror_conf *mirror_conf)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint32_t mr_ctl, vlvf;
+ uint32_t mp_lsb = 0;
+ uint32_t mv_msb = 0;
+ uint32_t mv_lsb = 0;
+ uint32_t mp_msb = 0;
+ uint8_t i = 0;
+ int reg_index = 0;
+ uint64_t vlan_mask = 0;
+
+ const uint8_t pool_mask_offset = 32;
+ const uint8_t vlan_mask_offset = 32;
+ const uint8_t dst_pool_offset = 8;
+ const uint8_t rule_mr_offset = 4;
+ const uint8_t mirror_rule_mask = 0x0F;
+
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ struct ixgbe_mirror_conf_ele *it;
+ int8_t rule_id;
+ uint8_t mirror_type = 0;
+
+ if (ixgbe_vt_check(hw) < 0)
+ return -ENOTSUP;
+
+ if (IXGBE_INVALID_MIRROR_TYPE(mirror_conf->rule_type)) {
+ PMD_DRV_LOG(ERR, "unsupported mirror type 0x%x.",
+ mirror_conf->rule_type);
+ return -EINVAL;
+ }
+
+ TAILQ_FOREACH(it, &filter_mirror_list, entries) {
+ if (it->filter_info.rule_type == mirror_conf->rule_type &&
+ it->filter_info.dst_pool == mirror_conf->dst_pool &&
+ it->filter_info.pool_mask == mirror_conf->pool_mask &&
+ it->filter_info.vlan_mask == mirror_conf->vlan_mask &&
+ !memcmp(it->filter_info.vlan_id, mirror_conf->vlan_id,
+ ETH_MIRROR_MAX_VLANS * sizeof(mirror_conf->vlan_id[0]))) {
+ PMD_DRV_LOG(ERR, "mirror rule exists.");
+ return -EEXIST;
+ }
+ }
+
+ rule_id = ixgbe_mirror_filter_insert(filter_info, mirror_conf);
+ if (rule_id < 0) {
+ PMD_DRV_LOG(ERR, "more than maximum mirror count(%d).",
+ IXGBE_MAX_MIRROR_RULES);
+ return -EINVAL;
+ }
+
+
+ if (mirror_conf->rule_type & ETH_MIRROR_VLAN) {
+ mirror_type |= IXGBE_MRCTL_VLME;
+ /* Check if vlan id is valid and find conresponding VLAN ID
+ * index in VLVF
+ */
+ for (i = 0; i < pci_dev->max_vfs; i++)
+ if (mirror_conf->vlan_mask & (1ULL << i)) {
+ /* search vlan id related pool vlan filter
+ * index
+ */
+ reg_index = ixgbe_find_vlvf_slot(hw,
+ mirror_conf->vlan_id[i],
+ false);
+ if (reg_index < 0)
+ return -EINVAL;
+ vlvf = IXGBE_READ_REG(hw,
+ IXGBE_VLVF(reg_index));
+ if ((vlvf & IXGBE_VLVF_VIEN) &&
+ ((vlvf & IXGBE_VLVF_VLANID_MASK) ==
+ mirror_conf->vlan_id[i])) {
+ vlan_mask |= (1ULL << reg_index);
+ } else {
+ ixgbe_mirror_filter_remove(filter_info,
+ mirror_conf->rule_id);
+ return -EINVAL;
+ }
+ }
+
+ mv_lsb = vlan_mask & 0xFFFFFFFF;
+ mv_msb = vlan_mask >> vlan_mask_offset;
+ }
+
+ /**
+ * if enable pool mirror, write related pool mask register,if disable
+ * pool mirror, clear PFMRVM register
+ */
+ if (mirror_conf->rule_type & ETH_MIRROR_VIRTUAL_POOL_UP) {
+ mirror_type |= IXGBE_MRCTL_VPME;
+ mp_lsb = mirror_conf->pool_mask & 0xFFFFFFFF;
+ mp_msb = mirror_conf->pool_mask >> pool_mask_offset;
+ }
+ if (mirror_conf->rule_type & ETH_MIRROR_UPLINK_PORT)
+ mirror_type |= IXGBE_MRCTL_UPME;
+ if (mirror_conf->rule_type & ETH_MIRROR_DOWNLINK_PORT)
+ mirror_type |= IXGBE_MRCTL_DPME;
+
+ /* read mirror control register and recalculate it */
+ mr_ctl = IXGBE_READ_REG(hw, IXGBE_MRCTL(rule_id));
+ mr_ctl |= mirror_type;
+ mr_ctl &= mirror_rule_mask;
+ mr_ctl |= mirror_conf->dst_pool << dst_pool_offset;
+
+ /* write mirrror control register */
+ IXGBE_WRITE_REG(hw, IXGBE_MRCTL(rule_id), mr_ctl);
+
+ /* write pool mirrror control register */
+ if (mirror_conf->rule_type & ETH_MIRROR_VIRTUAL_POOL_UP) {
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id), mp_lsb);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id + rule_mr_offset),
+ mp_msb);
+ }
+ /* write VLAN mirrror control register */
+ if (mirror_conf->rule_type & ETH_MIRROR_VLAN) {
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id), mv_lsb);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id + rule_mr_offset),
+ mv_msb);
+ }
+
+ return 0;
+}
+
+/* remove the mirror filter */
+static int
+ixgbe_config_mirror_filter_del(struct rte_eth_dev *dev,
+ struct ixgbe_flow_mirror_conf *conf)
+{
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ uint8_t rule_id = conf->rule_id;
+ int mr_ctl = 0;
+ uint32_t lsb_val = 0;
+ uint32_t msb_val = 0;
+ const uint8_t rule_mr_offset = 4;
+
+ if (ixgbe_vt_check(hw) < 0)
+ return -ENOTSUP;
+
+ if (rule_id >= IXGBE_MAX_MIRROR_RULES)
+ return -EINVAL;
+
+ /* clear PFVMCTL register */
+ IXGBE_WRITE_REG(hw, IXGBE_MRCTL(rule_id), mr_ctl);
+
+ /* clear pool mask register */
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id), lsb_val);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVM(rule_id + rule_mr_offset), msb_val);
+
+ /* clear vlan mask register */
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id), lsb_val);
+ IXGBE_WRITE_REG(hw, IXGBE_VMRVLAN(rule_id + rule_mr_offset), msb_val);
+
+ ixgbe_mirror_filter_remove(filter_info, rule_id);
+ return 0;
+}
+
+static void
+ixgbe_clear_all_mirror_filter(struct rte_eth_dev *dev)
+{
+ struct ixgbe_filter_info *filter_info =
+ IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
+ int i;
+
+ for (i = 0; i < IXGBE_MAX_MIRROR_RULES; i++) {
+ if (filter_info->mirror_mask & (1 << i)) {
+ ixgbe_config_mirror_filter_del(dev,
+ &filter_info->mirror_filters[i]);
+ }
+ }
+}
+
void
ixgbe_filterlist_init(void)
{
@@ -3185,6 +3365,7 @@ ixgbe_filterlist_init(void)
TAILQ_INIT(&filter_fdir_list);
TAILQ_INIT(&filter_l2_tunnel_list);
TAILQ_INIT(&filter_rss_list);
+ TAILQ_INIT(&filter_mirror_list);
TAILQ_INIT(&ixgbe_flow_list);
}
@@ -3198,6 +3379,7 @@ ixgbe_filterlist_flush(void)
struct ixgbe_fdir_rule_ele *fdir_rule_ptr;
struct ixgbe_flow_mem *ixgbe_flow_mem_ptr;
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
while ((ntuple_filter_ptr = TAILQ_FIRST(&filter_ntuple_list))) {
TAILQ_REMOVE(&filter_ntuple_list,
@@ -3241,6 +3423,13 @@ ixgbe_filterlist_flush(void)
rte_free(rss_filter_ptr);
}
+ while ((mirror_filter_ptr = TAILQ_FIRST(&filter_mirror_list))) {
+ TAILQ_REMOVE(&filter_mirror_list,
+ mirror_filter_ptr,
+ entries);
+ rte_free(mirror_filter_ptr);
+ }
+
while ((ixgbe_flow_mem_ptr = TAILQ_FIRST(&ixgbe_flow_list))) {
TAILQ_REMOVE(&ixgbe_flow_list,
ixgbe_flow_mem_ptr,
@@ -3272,6 +3461,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
struct ixgbe_hw_fdir_info *fdir_info =
IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
struct ixgbe_rte_flow_rss_conf rss_conf;
+ struct ixgbe_flow_mirror_conf mirror_conf;
struct rte_flow *flow = NULL;
struct ixgbe_ntuple_filter_ele *ntuple_filter_ptr;
struct ixgbe_ethertype_filter_ele *ethertype_filter_ptr;
@@ -3279,6 +3469,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
struct ixgbe_eth_l2_tunnel_conf_ele *l2_tn_filter_ptr;
struct ixgbe_fdir_rule_ele *fdir_rule_ptr;
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
struct ixgbe_flow_mem *ixgbe_flow_mem_ptr;
uint8_t first_mask = FALSE;
@@ -3501,6 +3692,30 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
}
}
+ memset(&mirror_conf, 0, sizeof(struct ixgbe_flow_mirror_conf));
+ ret = ixgbe_parse_sample_filter(dev, attr, pattern,
+ actions, &mirror_conf, error);
+ if (!ret) {
+ /* Just support mirror behavior */
+ ret = ixgbe_config_mirror_filter_add(dev, &mirror_conf);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "failed to add mirror filter");
+ goto out;
+ }
+
+ mirror_filter_ptr = rte_zmalloc("ixgbe_mirror_filter",
+ sizeof(struct ixgbe_mirror_conf_ele), 0);
+ if (!mirror_filter_ptr) {
+ PMD_DRV_LOG(ERR, "failed to allocate memory");
+ goto out;
+ }
+ mirror_filter_ptr->filter_info = mirror_conf;
+ TAILQ_INSERT_TAIL(&filter_mirror_list,
+ mirror_filter_ptr, entries);
+ flow->rule = mirror_filter_ptr;
+ flow->filter_type = RTE_ETH_FILTER_SAMPLE;
+ return flow;
+ }
out:
TAILQ_REMOVE(&ixgbe_flow_list,
ixgbe_flow_mem_ptr, entries);
@@ -3592,6 +3807,7 @@ ixgbe_flow_destroy(struct rte_eth_dev *dev,
struct ixgbe_hw_fdir_info *fdir_info =
IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
struct ixgbe_rss_conf_ele *rss_filter_ptr;
+ struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
switch (filter_type) {
case RTE_ETH_FILTER_NTUPLE:
@@ -3671,6 +3887,17 @@ ixgbe_flow_destroy(struct rte_eth_dev *dev,
rte_free(rss_filter_ptr);
}
break;
+ case RTE_ETH_FILTER_SAMPLE:
+ mirror_filter_ptr = (struct ixgbe_mirror_conf_ele *)
+ pmd_flow->rule;
+ ret = ixgbe_config_mirror_filter_del(dev,
+ &mirror_filter_ptr->filter_info);
+ if (!ret) {
+ TAILQ_REMOVE(&filter_mirror_list,
+ mirror_filter_ptr, entries);
+ rte_free(mirror_filter_ptr);
+ }
+ break;
default:
PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
filter_type);
@@ -3723,6 +3950,7 @@ ixgbe_flow_flush(struct rte_eth_dev *dev,
}
ixgbe_clear_rss_filter(dev);
+ ixgbe_clear_all_mirror_filter(dev);
ixgbe_filterlist_flush();
--
2.17.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser Steve Yang
@ 2021-02-18 18:59 ` Thomas Monjalon
2021-02-19 12:56 ` Ferruh Yigit
1 sibling, 0 replies; 20+ messages in thread
From: Thomas Monjalon @ 2021-02-18 18:59 UTC (permalink / raw)
To: Steve Yang
Cc: dev, jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika,
murphyx.yang, ferruh.yigit, andrew.rybchenko
03/11/2020 09:28, Steve Yang:
> --- a/lib/librte_ethdev/rte_ethdev_driver.h
> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
> @@ -477,6 +477,7 @@ enum rte_filter_type {
> RTE_ETH_FILTER_TUNNEL,
> RTE_ETH_FILTER_FDIR,
> RTE_ETH_FILTER_HASH,
> + RTE_ETH_FILTER_SAMPLE,
> RTE_ETH_FILTER_L2_TUNNEL,
> RTE_ETH_FILTER_GENERIC,
> };
I think this change is useless.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser Steve Yang
2021-02-18 18:59 ` Thomas Monjalon
@ 2021-02-19 12:56 ` Ferruh Yigit
1 sibling, 0 replies; 20+ messages in thread
From: Ferruh Yigit @ 2021-02-19 12:56 UTC (permalink / raw)
To: Steve Yang, dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, murphyx.yang
On 11/3/2020 8:28 AM, Steve Yang wrote:
> Define the sample filter parser for mirror, it will divide to two phases,
> the one is sample attributions pattern parsing, and the mirror config
> will be filled in according to pattern type VF/PF/VLAN when sample ratio
> is 1.
> The another is sample action parsing that the port id of mirror config
> will be filled in according to action type VF/PF.
>
> Signed-off-by: Steve Yang <stevex.yang@intel.com>
<...>
> +#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
> + ((vlan_item) ? ntohs(vlan_item->tci) & 0x0fff : (default_vid))
> +
'ntohs' usage is breaking the windows build (i40e is now build for windows)
because of missing header, can you please prefer:
I40E_NTOHS()
<...>
> + if (attr->group) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
> + attr, "Not support group.");
> + return -rte_errno;
> + }
> + if (attr->transfer) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
> + attr, "Not support group.");
copy/paste error in the error msg.
<...>
> +static int
> +i40e_flow_parse_sample_action(struct rte_eth_dev *dev,
> + const struct rte_flow_action *actions,
> + struct rte_flow_error *error,
> + union i40e_filter_t *filter)
> +{
> + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> + const struct rte_flow_action *act;
> + struct i40e_mirror_rule_conf *mirror_config = &filter->mirror_conf;
> + uint16_t *dst_vsi_seid = &mirror_config->dst_vsi_seid;
> + uint32_t index = 0;
> +
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_SAMPLE) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, act,
> + "Not supported action.");
> + return -rte_errno;
> + }
> +
Is above check required, isn't this function called only if the action type is
'sample'
> + if (((const struct rte_flow_action_sample *)act->conf)->ratio != 1) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
> + "Invalid ratio for mirror action");
So, only "ratio == 1" is supported, better to highlight this in the error message.
> + return -rte_errno;
> + }
> +
> + index++;
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> +
> + if (act->type == RTE_FLOW_ACTION_TYPE_PORT_ID) {
> + const struct rte_flow_action_port_id *conf =
> + (const struct rte_flow_action_port_id *)act->conf;
> +
> + if (!conf->id) {
> + *dst_vsi_seid = pf->main_vsi_seid;
> + } else if (conf->id <= pf->vf_num) {
> + *dst_vsi_seid = pf->vfs[conf->id - 1].vsi->seid;
> + } else {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION_CONF, act,
> + "Invalid port id mirror action");
> + return -rte_errno;
> + }
> + }
> +
> + /* Check if the next non-void item is END */
> + index++;
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, act,
> + "Only support pf or vf parameter item.");
So, only 'PORT_ID' is supported.
Can you please add comment on both "i40e_flow_parse_sample_attr_pattern" &
"i40e_flow_parse_sample_action" to document these restrictions, or expectation?
It both helps to understand what to expect without diving deep into the code and
documents intention which can help finding any possible coding error.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser Steve Yang
@ 2021-02-19 12:57 ` Ferruh Yigit
0 siblings, 0 replies; 20+ messages in thread
From: Ferruh Yigit @ 2021-02-19 12:57 UTC (permalink / raw)
To: Steve Yang, dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, murphyx.yang
On 11/3/2020 8:28 AM, Steve Yang wrote:
> Define the sample filter parser for mirror, it will divide to two phases,
> the one is sample attributions pattern parsing, and the mirror config
> will be filled in according to pattern type VF/PF/VLAN when sample ratio
> is 1.
> The another is sample action parsing that the port id of mirror config
> will be filled in according to action type VF/PF.
>
> Signed-off-by: Steve Yang <stevex.yang@intel.com>
<...>
> +
> +#define GET_VLAN_ID_FROM_TCI(vlan_item, default_vid) \
> + ((vlan_item) ? ntohs((vlan_item)->tci) & 0x0fff : (default_vid))
> +
Although ixgbe is not build for windows, better to use 'IXGBE_NTOHS' for
consistency.
> /* ntuple filter list structure */
> struct ixgbe_ntuple_filter_ele {
> TAILQ_ENTRY(ixgbe_ntuple_filter_ele) entries;
> @@ -79,6 +91,11 @@ struct ixgbe_rss_conf_ele {
> TAILQ_ENTRY(ixgbe_rss_conf_ele) entries;
> struct ixgbe_rte_flow_rss_conf filter_info;
> };
> +/* rss filter list structure */
copy/paste error?
<...>
> + if (attr->group) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
> + attr, "Not support group.");
> + return -rte_errno;
> + }
> + if (attr->transfer) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
> + attr, "Not support group.");
copy/paste error?
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule Steve Yang
@ 2021-02-19 12:59 ` Ferruh Yigit
0 siblings, 0 replies; 20+ messages in thread
From: Ferruh Yigit @ 2021-02-19 12:59 UTC (permalink / raw)
To: Steve Yang, dev
Cc: jia.guo, haiyue.wang, qiming.yang, beilei.xing, orika, murphyx.yang
On 11/3/2020 8:28 AM, Steve Yang wrote:
> When set follow sample rule's ratio equal to one, its behavior is same
> as mirror-rule, so we can use "flow create * pattern * actions sample *"
> to replace old "set port * mirror-rule *" command now.
>
> The example of mirror rule command mapping to flow management command:
> (in below command, port 0 is PF and port 1-2 is VF):
> 1) ingress: pf => pf
> set port 0 mirror-rule 0 uplink-mirror dst-pool 2 on
> or
> flow create 0 ingress pattern pf / end \
> actions sample ratio 1 / port_id id 0 / end
> 2) egress: pf => pf
> set port 0 mirror-rule 0 downlink-mirror dst-pool 2 on
> or
> flow create 0 egress pattern pf / end \
> actions sample ratio 1 / port_id id 0 / end
> 3) ingress: pf => vf 2
> set port 0 mirror-rule 0 uplink-mirror dst-pool 1 on
> or
> flow create 0 ingress pattern pf / end \
> actions sample ratio 1 / port_id id 2 / end
> 4) egress: pf => vf 2
> set port 0 mirror-rule 0 downlink-mirror dst-pool 1 on
> or
> flow create 0 egress pattern pf / end \
> actions sample ratio 1 / port_id id 2 / end
> 5) ingress: vf 0,1 => pf
> set port 0 mirror-rule 0 pool-mirror-up 0x3 dst-pool 2 on
> or
> flow create 0 ingress pattern vf id is 0 / end \
> actions sample ratio 1 / port_id id 0 / end
> flow create 0 ingress pattern vf id is 1 / end \
> actions sample ratio 1 / port_id id 0 / end
> 6) ingress: vf 0 => vf 1
> set port 0 mirror-rule 0 pool-mirror-up 0x1 dst-pool 1 on
> or
> flow create 0 ingress pattern vf id is 0 / end \
> actions sample ratio 1 / port_id id 2 / end
> 7) ingress: vlan 4,6 => vf 1
> rx_vlan add 4 port 0 vf 0xf
> rx_vlan add 6 port 0 vf 0xf
> set port 0 mirror-rule 0 vlan-mirror 4,6 dst-pool 1 on
> or
> rx_vlan add 4 port 0 vf 0xf
> rx_vlan add 6 port 0 vf 0xf
> flow create 0 ingress pattern vlan vid is 4 / end \
> actions sample ratio 1 / port_id id 2 / end
> flow create 0 ingress pattern vlan vid is 6 / end \
> actions sample ratio 1 / port_id id 2 / end
>
> Signed-off-by: Steve Yang <stevex.yang@intel.com>
<...>
> +static int
> +ixgbe_config_mirror_filter_add(struct rte_eth_dev *dev,
> + struct ixgbe_flow_mirror_conf *mirror_conf)
> +{
> + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> + uint32_t mr_ctl, vlvf;
> + uint32_t mp_lsb = 0;
> + uint32_t mv_msb = 0;
> + uint32_t mv_lsb = 0;
> + uint32_t mp_msb = 0;
> + uint8_t i = 0;
> + int reg_index = 0;
> + uint64_t vlan_mask = 0;
> +
> + const uint8_t pool_mask_offset = 32;
> + const uint8_t vlan_mask_offset = 32;
> + const uint8_t dst_pool_offset = 8;
> + const uint8_t rule_mr_offset = 4;
> + const uint8_t mirror_rule_mask = 0x0F;
> +
> + struct ixgbe_hw *hw =
> + IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> + struct ixgbe_filter_info *filter_info =
> + IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
> + struct ixgbe_mirror_conf_ele *it;
> + int8_t rule_id;
> + uint8_t mirror_type = 0;
> +
> + if (ixgbe_vt_check(hw) < 0)
> + return -ENOTSUP;
> +
> + if (IXGBE_INVALID_MIRROR_TYPE(mirror_conf->rule_type)) {
> + PMD_DRV_LOG(ERR, "unsupported mirror type 0x%x.",
> + mirror_conf->rule_type);
> + return -EINVAL;
> + }
> +
> + TAILQ_FOREACH(it, &filter_mirror_list, entries) {
> + if (it->filter_info.rule_type == mirror_conf->rule_type &&
> + it->filter_info.dst_pool == mirror_conf->dst_pool &&
> + it->filter_info.pool_mask == mirror_conf->pool_mask &&
> + it->filter_info.vlan_mask == mirror_conf->vlan_mask &&
> + !memcmp(it->filter_info.vlan_id, mirror_conf->vlan_id,
> + ETH_MIRROR_MAX_VLANS * sizeof(mirror_conf->vlan_id[0]))) {
> + PMD_DRV_LOG(ERR, "mirror rule exists.");
> + return -EEXIST;
> + }
> + }
Can you please help me to understand this.
There is a per device 'ixgbe_filter_info->mirror_filters',
also there is a driver global 'ixgbe_mirror_filter_list',
When a new filter added, above checks the 'ixgbe_mirror_filter_list' for all
filters, but what if driver is driving multiple devices and we want to add same
rule for each device, won't above checks be wrong?
Btw, I am not clear why there are two separate per-device and driver global list
exists, I can see that is a common patter for filters not specific to this one,
can you please explain?
<...>
> +static void
> +ixgbe_clear_all_mirror_filter(struct rte_eth_dev *dev)
> +{
> + struct ixgbe_filter_info *filter_info =
> + IXGBE_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
> + int i;
> +
> + for (i = 0; i < IXGBE_MAX_MIRROR_RULES; i++) {
> + if (filter_info->mirror_mask & (1 << i)) {
> + ixgbe_config_mirror_filter_del(dev,
> + &filter_info->mirror_filters[i]);
> + }
> + }
This function is clearing all device filters, but not removing them from global
list, is this intentional?
> +}
> +
> void
> ixgbe_filterlist_init(void)
> {
> @@ -3185,6 +3365,7 @@ ixgbe_filterlist_init(void)
> TAILQ_INIT(&filter_fdir_list);
> TAILQ_INIT(&filter_l2_tunnel_list);
> TAILQ_INIT(&filter_rss_list);
> + TAILQ_INIT(&filter_mirror_list);
> TAILQ_INIT(&ixgbe_flow_list);
> }
>
> @@ -3198,6 +3379,7 @@ ixgbe_filterlist_flush(void)
> struct ixgbe_fdir_rule_ele *fdir_rule_ptr;
> struct ixgbe_flow_mem *ixgbe_flow_mem_ptr;
> struct ixgbe_rss_conf_ele *rss_filter_ptr;
> + struct ixgbe_mirror_conf_ele *mirror_filter_ptr;
>
> while ((ntuple_filter_ptr = TAILQ_FIRST(&filter_ntuple_list))) {
> TAILQ_REMOVE(&filter_ntuple_list,
> @@ -3241,6 +3423,13 @@ ixgbe_filterlist_flush(void)
> rte_free(rss_filter_ptr);
> }
>
> + while ((mirror_filter_ptr = TAILQ_FIRST(&filter_mirror_list))) {
> + TAILQ_REMOVE(&filter_mirror_list,
> + mirror_filter_ptr,
> + entries);
> + rte_free(mirror_filter_ptr);
> + }
This block removes filters from global list, but it doesn't remove them from
per-device list, and it doesn't remove them from device, so the filtering still
be active in the device after this call, is this intentional?
<...>
> + memset(&mirror_conf, 0, sizeof(struct ixgbe_flow_mirror_conf));
> + ret = ixgbe_parse_sample_filter(dev, attr, pattern,
> + actions, &mirror_conf, error);
> + if (!ret) {
> + /* Just support mirror behavior */
> + ret = ixgbe_config_mirror_filter_add(dev, &mirror_conf);
> + if (ret) {
> + PMD_DRV_LOG(ERR, "failed to add mirror filter");
> + goto out;
> + }
> +
> + mirror_filter_ptr = rte_zmalloc("ixgbe_mirror_filter",
> + sizeof(struct ixgbe_mirror_conf_ele), 0);
> + if (!mirror_filter_ptr) {
> + PMD_DRV_LOG(ERR, "failed to allocate memory");
> + goto out;
Should rollback the above filter addition on the error?
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2021-02-19 12:59 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-14 8:41 [dpdk-dev] [PATCH v1 0/8] use generic flow command to re-realize mirror rule SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 1/8] ethdev: support the mirror action for flow SimonX Lu
2020-10-14 12:07 ` Ori Kam
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 2/8] app/testpmd: support action mirror for flow command SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 3/8] net/ixgbe: add mirror rule config and extend flow filter type SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 4/8] net/ixgbe: define the mirror filter paser SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 5/8] net/ixgbe: use generic flow command to re-realize mirror rule SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 6/8] net/i40e: add mirror rule config and export add/del rule APIs SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 7/8] net/i40e: define the mirror filter paser SimonX Lu
2020-10-14 8:41 ` [dpdk-dev] [PATCH v1 8/8] net/i40e: use generic flow command to re-realize mirror rule SimonX Lu
[not found] ` <20201103082809.41149-1-stevex.yang@intel.com>
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 1/6] net/i40e: add mirror rule config and add/del rule APIs Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 2/6] net/i40e: define the mirror filter parser Steve Yang
2021-02-18 18:59 ` Thomas Monjalon
2021-02-19 12:56 ` Ferruh Yigit
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 3/6] net/i40e: use generic flow command to re-realize mirror rule Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 4/6] net/ixgbe: add mirror rule config and add/del rule APIs Steve Yang
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 5/6] net/ixgbe: define the mirror filter parser Steve Yang
2021-02-19 12:57 ` Ferruh Yigit
2020-11-03 8:28 ` [dpdk-dev] [RFC v2 6/6] net/ixgbe: use flow sample to re-realize mirror rule Steve Yang
2021-02-19 12:59 ` Ferruh Yigit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).