From: "Varghese, Vipin" <vipin.varghese@intel.com>
To: "pbhagavatula@marvell.com" <pbhagavatula@marvell.com>,
"jerinj@marvell.com" <jerinj@marvell.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v6 00/10] example/l2fwd-event: introduce l2fwd-event example
Date: Mon, 21 Oct 2019 03:25:51 +0000 [thread overview]
Message-ID: <4C9E0AB70F954A408CC4ADDBF0F8FA7D4D3DCA77@BGSMSX101.gar.corp.intel.com> (raw)
In-Reply-To: <20191014182247.961-1-pbhagavatula@marvell.com>
Hi Pavan,
Thanks for sharing the write up, following are some of my thoughts.
Snipped
>
> Based on event device capability the configuration is done as follows:
> - A single event device is enabled.
> - The number of event ports is equal to the number of worker
> cores enabled in the core mask. Additional event ports might
> be configured based on Rx/Tx adapter capability.
> - The number of event queues is equal to the number of ethernet
> ports. If Tx adapter doesn't have internal port capability then
> an additional single link event queue is used to enqueue events
> to Tx adapter.
1. Are we support per port function as 'mac_updating' and 'non_macupdating'?
2. If no for above, why is that each port should have ` number of event queues is equal to the number of ethernet`?
3. With this work for vdev ports, if no are we adding check for the same in `main` function?
snipped
next prev parent reply other threads:[~2019-10-21 3:25 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 9:25 [dpdk-dev] [PATCH v2 " pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 9:43 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 10:35 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-24 9:41 ` [dpdk-dev] [PATCH v4 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-26 17:28 ` Jerin Jacob
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-26 17:33 ` Jerin Jacob
2019-09-27 13:08 ` Nipun Gupta
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-27 13:15 ` Nipun Gupta
2019-09-27 14:45 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-27 13:22 ` Nipun Gupta
2019-09-27 14:43 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-27 13:28 ` Nipun Gupta
2019-09-27 14:35 ` Pavan Nikhilesh Bhagavatula
2019-09-30 5:38 ` Nipun Gupta
2019-09-30 6:38 ` Jerin Jacob
2019-09-30 7:46 ` Nipun Gupta
2019-09-30 8:09 ` Pavan Nikhilesh Bhagavatula
2019-09-30 17:50 ` Nipun Gupta
2019-10-01 5:59 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-26 17:42 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-11 14:41 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-04 12:30 ` Nipun Gupta
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-11 14:52 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-11 14:11 ` Jerin Jacob
2019-10-03 10:33 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-03 12:40 ` Hemant Agrawal
2019-10-03 12:47 ` Jerin Jacob
2019-10-09 7:50 ` Nipun Gupta
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 " pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-16 19:07 ` Stephen Hemminger
2019-10-21 3:29 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-21 3:19 ` Varghese, Vipin
2019-10-21 16:53 ` Pavan Nikhilesh Bhagavatula
2019-10-22 3:13 ` Varghese, Vipin
2019-10-22 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-21 3:12 ` Varghese, Vipin
2019-10-21 16:56 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:48 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-16 12:38 ` [dpdk-dev] [PATCH v6 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-21 3:25 ` Varghese, Vipin [this message]
2019-10-21 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:57 ` Varghese, Vipin
2019-10-22 15:55 ` Pavan Nikhilesh Bhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 " pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-30 13:19 ` Jerin Jacob
2019-10-30 12:58 ` [dpdk-dev] [PATCH v7 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C9E0AB70F954A408CC4ADDBF0F8FA7D4D3DCA77@BGSMSX101.gar.corp.intel.com \
--to=vipin.varghese@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).