From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Jiawen Wu <jiawenwu@trustnetic.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v6 09/19] net/ngbe: store MAC address
Date: Fri, 2 Jul 2021 19:12:27 +0300 [thread overview]
Message-ID: <4ad7ea3c-ce98-9ba4-db0a-b35a8a4c2730@oktetlabs.ru> (raw)
In-Reply-To: <20210617110005.4132926-10-jiawenwu@trustnetic.com>
On 6/17/21 1:59 PM, Jiawen Wu wrote:
> Store MAC addresses and init receive address filters.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
[snip]
> diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
> index 31d4dda976..deca64137d 100644
> --- a/drivers/net/ngbe/ngbe_ethdev.c
> +++ b/drivers/net/ngbe/ngbe_ethdev.c
> @@ -116,6 +116,31 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
> return -EIO;
> }
>
> + /* Allocate memory for storing MAC addresses */
> + eth_dev->data->mac_addrs = rte_zmalloc("ngbe", RTE_ETHER_ADDR_LEN *
> + hw->mac.num_rar_entries, 0);
> + if (eth_dev->data->mac_addrs == NULL) {
> + PMD_INIT_LOG(ERR,
> + "Failed to allocate %u bytes needed to store "
> + "MAC addresses",
Do not split format strings. It makes it hard to
find line in code using grep by the message
found in log.
[snip]
> + RTE_ETHER_ADDR_LEN * hw->mac.num_rar_entries);
> + return -ENOMEM;
> + }
> +
> + /* Copy the permanent MAC address */
> + rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.perm_addr,
> + ð_dev->data->mac_addrs[0]);
> +
> + /* Allocate memory for storing hash filter MAC addresses */
> + eth_dev->data->hash_mac_addrs = rte_zmalloc("ngbe",
> + RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC, 0);
> + if (eth_dev->data->hash_mac_addrs == NULL) {
> + PMD_INIT_LOG(ERR,
> + "Failed to allocate %d bytes needed to store MAC addresses",
> + RTE_ETHER_ADDR_LEN * NGBE_VMDQ_NUM_UC_MAC);
Shouldn't we free eth_dev->data->mac_addrs here?
> + return -ENOMEM;
> + }
> +
> return 0;
> }
>
next prev parent reply other threads:[~2021-07-02 16:12 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 10:59 [dpdk-dev] [PATCH v6 00/19] net: ngbe PMD Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 01/19] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-07-02 13:07 ` Andrew Rybchenko
2021-07-05 2:52 ` Jiawen Wu
2021-07-05 8:54 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 02/19] net/ngbe: support probe and remove Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 03/19] net/ngbe: add log type and error type Jiawen Wu
2021-07-02 13:22 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 04/19] net/ngbe: define registers Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 05/19] net/ngbe: set MAC type and LAN ID with device initialization Jiawen Wu
2021-07-02 16:05 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 06/19] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 07/19] net/ngbe: add HW initialization Jiawen Wu
2021-07-02 16:08 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 08/19] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 09/19] net/ngbe: store MAC address Jiawen Wu
2021-07-02 16:12 ` Andrew Rybchenko [this message]
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 10/19] net/ngbe: support link update Jiawen Wu
2021-07-02 16:24 ` Andrew Rybchenko
2021-07-05 7:10 ` Jiawen Wu
2021-07-05 8:58 ` Andrew Rybchenko
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 11/19] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 12/19] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-07-02 16:35 ` Andrew Rybchenko
2021-07-05 8:36 ` Jiawen Wu
2021-07-05 9:08 ` Andrew Rybchenko
2021-07-06 7:53 ` Jiawen Wu
2021-07-06 8:06 ` Andrew Rybchenko
2021-07-06 8:33 ` Jiawen Wu
2021-06-17 10:59 ` [dpdk-dev] [PATCH v6 13/19] net/ngbe: add Tx " Jiawen Wu
2021-07-02 16:39 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 14/19] net/ngbe: add simple Rx flow Jiawen Wu
2021-07-02 16:42 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 15/19] net/ngbe: add simple Tx flow Jiawen Wu
2021-07-02 16:45 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 16/19] net/ngbe: add device start and stop operations Jiawen Wu
2021-07-02 16:52 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 17/19] net/ngbe: add Tx queue start and stop Jiawen Wu
2021-07-02 16:55 ` Andrew Rybchenko
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 18/19] net/ngbe: add Rx " Jiawen Wu
2021-06-17 11:00 ` [dpdk-dev] [PATCH v6 19/19] net/ngbe: support to close and reset device Jiawen Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ad7ea3c-ce98-9ba4-db0a-b35a8a4c2730@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).