From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: nirranjan@chelsio.com, kaara.satwik@chelsio.com
Subject: [dpdk-dev] [PATCH 3/9] net/cxgbe: add rte_flow support for matching all packets on PF
Date: Wed, 11 Mar 2020 14:35:45 +0530 [thread overview]
Message-ID: <4f6cf569db066684605623f3c18d6af055205ae9.1583906144.git.kaara.satwik@chelsio.com> (raw)
In-Reply-To: <cover.1583906144.git.kaara.satwik@chelsio.com>
In-Reply-To: <cover.1583906144.git.kaara.satwik@chelsio.com>
From: Karra Satwik <kaara.satwik@chelsio.com>
Add support to match all packets received on the underlying PF
Note that the same 17-bit hardware tuple is shared between QinQ
and PF match. Hence, match on either QinQ or PF only can be done
at a time. Both QinQ and PF match can't be enabled at the same time.
Also, remove check to reject rules without spec because
RTE_FLOW_ITEM_TYPE_PF doesn't require a spec. Due to this check
removal, RTE_FLOW_ITEM_TYPE_PHY_PORT item needs to be updated to
handle NULL spec
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
drivers/net/cxgbe/cxgbe_filter.c | 39 ++++++++++++++++++++++++-------
drivers/net/cxgbe/cxgbe_filter.h | 2 +-
drivers/net/cxgbe/cxgbe_flow.c | 40 ++++++++++++++++++++++++++------
3 files changed, 64 insertions(+), 17 deletions(-)
diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
index 193738f93..4c50932af 100644
--- a/drivers/net/cxgbe/cxgbe_filter.c
+++ b/drivers/net/cxgbe/cxgbe_filter.c
@@ -73,15 +73,17 @@ int cxgbe_validate_filter(struct adapter *adapter,
if (U(F_PORT, iport) || U(F_ETHERTYPE, ethtype) ||
U(F_PROTOCOL, proto) || U(F_MACMATCH, macidx) ||
U(F_VLAN, ivlan_vld) || U(F_VNIC_ID, ovlan_vld) ||
- U(F_TOS, tos))
+ U(F_TOS, tos) || U(F_VNIC_ID, pfvf_vld))
return -EOPNOTSUPP;
- /* Ensure OVLAN match is enabled in hardware */
- if (S(ovlan_vld) && (iconf & F_VNIC))
+ /* Either OVLAN or PFVF match is enabled in hardware, but not both */
+ if ((S(pfvf_vld) && !(iconf & F_VNIC)) ||
+ (S(ovlan_vld) && (iconf & F_VNIC)))
return -EOPNOTSUPP;
- /* To use OVLAN, L4 encapsulation match must not be enabled */
- if (S(ovlan_vld) && (iconf & F_USE_ENC_IDX))
+ /* To use OVLAN or PFVF, L4 encapsulation match must not be enabled */
+ if ((S(ovlan_vld) && (iconf & F_USE_ENC_IDX)) ||
+ (S(pfvf_vld) && (iconf & F_USE_ENC_IDX)))
return -EOPNOTSUPP;
#undef S
@@ -308,8 +310,12 @@ static u64 hash_filter_ntuple(const struct filter_entry *f)
ntuple |= (u64)(F_FT_VLAN_VLD | f->fs.val.ivlan) <<
tp->vlan_shift;
if (tp->vnic_shift >= 0) {
- if (!(adap->params.tp.ingress_config & F_VNIC) &&
- f->fs.mask.ovlan_vld)
+ if ((adap->params.tp.ingress_config & F_VNIC) &&
+ f->fs.mask.pfvf_vld)
+ ntuple |= (u64)((f->fs.val.pfvf_vld << 16) |
+ (f->fs.val.pf << 13)) << tp->vnic_shift;
+ else if (!(adap->params.tp.ingress_config & F_VNIC) &&
+ f->fs.mask.ovlan_vld)
ntuple |= (u64)(f->fs.val.ovlan_vld << 16 |
f->fs.val.ovlan) << tp->vnic_shift;
}
@@ -965,10 +971,11 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
{
struct port_info *pi = ethdev2pinfo(dev);
struct adapter *adapter = pi->adapter;
- unsigned int fidx, iq;
+ u8 nentries, bitoff[16] = {0};
struct filter_entry *f;
unsigned int chip_ver;
- u8 nentries, bitoff[16] = {0};
+ unsigned int fidx, iq;
+ u32 iconf;
int ret;
if (is_hashfilter(adapter) && fs->cap)
@@ -1052,6 +1059,20 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
f->fs.iq = iq;
f->dev = dev;
+ iconf = adapter->params.tp.ingress_config;
+
+ /* Either PFVF or OVLAN can be active, but not both
+ * So, if PFVF is enabled, then overwrite the OVLAN
+ * fields with PFVF fields before writing the spec
+ * to hardware.
+ */
+ if (iconf & F_VNIC) {
+ f->fs.val.ovlan = fs->val.pf << 13;
+ f->fs.mask.ovlan = fs->mask.pf << 13;
+ f->fs.val.ovlan_vld = fs->val.pfvf_vld;
+ f->fs.mask.ovlan_vld = fs->mask.pfvf_vld;
+ }
+
/*
* Attempt to set the filter. If we don't succeed, we clear
* it and return the failure.
diff --git a/drivers/net/cxgbe/cxgbe_filter.h b/drivers/net/cxgbe/cxgbe_filter.h
index 06021c854..2ac210045 100644
--- a/drivers/net/cxgbe/cxgbe_filter.h
+++ b/drivers/net/cxgbe/cxgbe_filter.h
@@ -18,7 +18,7 @@
#define MATCHTYPE_BITWIDTH 3
#define PROTO_BITWIDTH 8
#define TOS_BITWIDTH 8
-#define PF_BITWIDTH 8
+#define PF_BITWIDTH 3
#define VF_BITWIDTH 8
#define IVLAN_BITWIDTH 16
#define OVLAN_BITWIDTH 16
diff --git a/drivers/net/cxgbe/cxgbe_flow.c b/drivers/net/cxgbe/cxgbe_flow.c
index c860b7886..c1f5ef045 100644
--- a/drivers/net/cxgbe/cxgbe_flow.c
+++ b/drivers/net/cxgbe/cxgbe_flow.c
@@ -154,9 +154,15 @@ cxgbe_fill_filter_region(struct adapter *adap,
if (tp->vlan_shift >= 0 && fs->mask.ivlan_vld)
ntuple_mask |= (u64)(F_FT_VLAN_VLD | fs->mask.ivlan) <<
tp->vlan_shift;
- if (tp->vnic_shift >= 0 && fs->mask.ovlan_vld)
- ntuple_mask |= (u64)(F_FT_VLAN_VLD | fs->mask.ovlan) <<
- tp->vnic_shift;
+ if (tp->vnic_shift >= 0) {
+ if (fs->mask.ovlan_vld)
+ ntuple_mask |= (u64)(fs->val.ovlan_vld << 16 |
+ fs->mask.ovlan) << tp->vnic_shift;
+ else if (fs->mask.pfvf_vld)
+ ntuple_mask |= (u64)((fs->mask.pfvf_vld << 16) |
+ (fs->mask.pf << 13)) <<
+ tp->vnic_shift;
+ }
if (tp->tos_shift >= 0)
ntuple_mask |= (u64)fs->mask.tos << tp->tos_shift;
@@ -221,6 +227,9 @@ ch_rte_parsetype_port(const void *dmask, const struct rte_flow_item *item,
mask = umask ? umask : (const struct rte_flow_item_phy_port *)dmask;
+ if (!val)
+ return 0; /* Wildcard, match all physical ports */
+
if (val->index > 0x7)
return rte_flow_error_set(e, EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
item,
@@ -291,6 +300,22 @@ ch_rte_parsetype_vlan(const void *dmask, const struct rte_flow_item *item,
return 0;
}
+static int
+ch_rte_parsetype_pf(const void *dmask __rte_unused,
+ const struct rte_flow_item *item __rte_unused,
+ struct ch_filter_specification *fs,
+ struct rte_flow_error *e __rte_unused)
+{
+ struct rte_flow *flow = (struct rte_flow *)fs->private;
+ struct rte_eth_dev *dev = flow->dev;
+ struct adapter *adap = ethdev2adap(dev);
+
+ CXGBE_FILL_FS(1, 1, pfvf_vld);
+
+ CXGBE_FILL_FS(adap->pf, ~0, pf);
+ return 0;
+}
+
static int
ch_rte_parsetype_udp(const void *dmask, const struct rte_flow_item *item,
struct ch_filter_specification *fs,
@@ -918,6 +943,11 @@ static struct chrte_fparse parseitem[] = {
.fptr = ch_rte_parsetype_tcp,
.dmask = &rte_flow_item_tcp_mask,
},
+
+ [RTE_FLOW_ITEM_TYPE_PF] = {
+ .fptr = ch_rte_parsetype_pf,
+ .dmask = NULL,
+ },
};
static int
@@ -951,10 +981,6 @@ cxgbe_rtef_parse_items(struct rte_flow *flow,
repeat[i->type] = 1;
- /* No spec found for this pattern item. Skip it */
- if (!i->spec)
- break;
-
/* validate the item */
ret = cxgbe_validate_item(i, e);
if (ret)
--
2.25.0
next prev parent reply other threads:[~2020-03-11 9:17 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 9:05 [dpdk-dev] [PATCH 0/9] net/cxgbe: updates for rte_flow support Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 1/9] net/cxgbe: add rte_flow support for matching Q-in-Q VLAN Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 2/9] net/cxgbe: add rte_flow support for matching IP TOS Rahul Lakkireddy
2020-03-11 9:05 ` Rahul Lakkireddy [this message]
2020-03-11 9:05 ` [dpdk-dev] [PATCH 4/9] net/cxgbe: add rte_flow support for matching all packets on VF Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 5/9] net/cxgbe: add rte_flow support for overwriting destination MAC Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 6/9] net/cxgbe: add Source MAC Table (SMT) support Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 7/9] net/cxgbe: add rte_flow support for Source MAC Rewrite Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 8/9] net/cxgbe: use firmware API for validating filter spec Rahul Lakkireddy
2020-03-11 9:05 ` [dpdk-dev] [PATCH 9/9] net/cxgbe: add devargs to control filtermode and filtermask values Rahul Lakkireddy
2020-03-11 13:11 ` [dpdk-dev] [PATCH 0/9] net/cxgbe: updates for rte_flow support Ferruh Yigit
2020-03-18 12:09 ` Thomas Monjalon
2020-03-18 13:06 ` Rahul Lakkireddy
2020-03-18 15:07 ` Thomas Monjalon
2020-03-19 7:58 ` Rahul Lakkireddy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4f6cf569db066684605623f3c18d6af055205ae9.1583906144.git.kaara.satwik@chelsio.com \
--to=rahul.lakkireddy@chelsio.com \
--cc=dev@dpdk.org \
--cc=kaara.satwik@chelsio.com \
--cc=nirranjan@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).