From: Thomas Monjalon <thomas@monjalon.net>
To: "Phil Yang (Arm Technology China)" <Phil.Yang@arm.com>
Cc: Bruce Richardson <bruce.richardson@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"david.marchand@redhat.com" <david.marchand@redhat.com>,
"jerinj@marvell.com" <jerinj@marvell.com>,
Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
"Gavin Hu (Arm Technology China)" <Gavin.Hu@arm.com>,
"Joyce Kong (Arm Technology China)" <Joyce.Kong@arm.com>,
nd <nd@arm.com>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf architercture
Date: Wed, 27 Nov 2019 11:32:54 +0100 [thread overview]
Message-ID: <5000317.ObS1QFYq1c@xps> (raw)
In-Reply-To: <VE1PR08MB4640677BB37E7328A4BC2498E9440@VE1PR08MB4640.eurprd08.prod.outlook.com>
27/11/2019 11:00, Phil Yang (Arm Technology China):
> > -----Original Message-----
> > From: Bruce Richardson <bruce.richardson@intel.com>
> > Sent: Wednesday, November 27, 2019 5:30 PM
> > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > Cc: thomas@monjalon.net; dev@dpdk.org; david.marchand@redhat.com;
> > jerinj@marvell.com; Honnappa Nagarahalli
> > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf
> > architercture
> >
> > On Wed, Nov 27, 2019 at 08:09:22AM +0000, Phil Yang (Arm Technology China)
> > wrote:
> > > > -----Original Message-----
> > > > From: Thomas Monjalon <thomas@monjalon.net>
> > > > Sent: Wednesday, November 27, 2019 1:02 AM
> > > > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > > > Cc: dev@dpdk.org; Bruce Richardson <bruce.richardson@intel.com>;
> > > > david.marchand@redhat.com; jerinj@marvell.com; Honnappa
> > Nagarahalli
> > > > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > > > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > > > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on
> > armhf
> > > > architercture
> > > >
> > > > 12/11/2019 07:40, Phil Yang (Arm Technology China):
> > > > > > -----Original Message-----
> > > > > > From: Thomas Monjalon <thomas@monjalon.net>
> > > > > > Sent: Tuesday, November 12, 2019 2:03 PM
> > > > > > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > > > > > Cc: Bruce Richardson <bruce.richardson@intel.com>; dev@dpdk.org;
> > > > > > david.marchand@redhat.com; jerinj@marvell.com; Honnappa
> > > > Nagarahalli
> > > > > > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > > > > > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > > > > > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > > > > > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error
> > on
> > > > armhf
> > > > > > architercture
> > > > > >
> > > > > > 12/11/2019 06:25, Phil Yang (Arm Technology China):
> > > > > > > From: Bruce Richardson <bruce.richardson@intel.com>
> > > > > > > > On Mon, Nov 11, 2019 at 06:34:20PM +0800, Phil Yang wrote:
> > > > > > > > > The older version (e.g. version 7.4.0 ) of GNU C compiler for the
> > > > armhf
> > > > > > > > > architecture doesn't support the flag '-Wno-address-of-packed-
> > > > > > member',
> > > > > > > > > so remove this flag for aarch32.
> > > > > > > > >
> > > > > > > > > Fixes: a385972c3675 ("mk: disable warning for packed member
> > > > pointer")
> > > > > > > > > Cc: stable@dpdk.org
> > > > > > > > >
> > > > > > > > > Signed-off-by: Phil Yang <phil.yang@arm.com>
> > > > > > > > > Reviewed-by: Gavin Hu <gavin.hu@arm.com>
> > > > > > > > > Tested-by: Joyce Kong <joyce.kong@arm.com>
> > > > > > > > >
> > > > > > > > > ---
> > > > > > > > > mk/toolchain/gcc/rte.vars.mk | 2 ++
> > > > > > > > > 1 file changed, 2 insertions(+)
> > > > > > > > >
> > > > > > > > > diff --git a/mk/toolchain/gcc/rte.vars.mk
> > > > > > b/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > index 9fc7041..ec0cbbf 100644
> > > > > > > > > --- a/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > +++ b/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > @@ -100,7 +100,9 @@ WERROR_FLAGS += -Wno-format-
> > truncation
> > > > > > > > > endif
> > > > > > > > >
> > > > > > > > > # disable packed member unalign warnings
> > > > > > > > > +ifneq ($(CONFIG_RTE_ARCH_ARM), y)
> > > > > > > > > WERROR_FLAGS += -Wno-address-of-packed-member
> > > > > > > > > +endif
> > > > > > > > >
> > > > > > > > You don't need to do this, as gcc will not complain about this
> > unknown
> > > > > > flag
> > > > > > > > unless you have other issues in your code.[1] I think it's better to
> > > > keep
> > > > > > the
> > > > > > > > code clean in this case, otherwise we'll have the code littered with
> > > > > > > > conditionals for various flags.
> > > > > > > >
> > > > > > > > /Bruce
> > > > > > > >
> > > > > > > > [1] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
> > > > > > > > "When an unrecognized warning option is requested (e.g.,
> > > > > > > > -Wunknown-warning), GCC emits a diagnostic stating that the
> > option
> > > > is
> > > > > > not
> > > > > > > > recognized. However, if the -Wno- form is used, the behavior is
> > > > slightly
> > > > > > > > different: no diagnostic is produced for -Wno-unknown-warning
> > > > unless
> > > > > > other
> > > > > > > > diagnostics are being produced. This allows the use of new -Wno-
> > > > options
> > > > > > > > with old compilers, but if something goes wrong, the compiler
> > warns
> > > > that
> > > > > > an
> > > > > > > > unrecognized option is present."
> > > > > > >
> > > > > > > Thanks, Bruce.
> > > > > > >
> > > > > > > There are thousands of warnings with alignment when compiling for
> > > > > > ARMv7 (ARMv7 supports unaligned memory access).
> > > > > > > Without this new flag, the build system works fine for ARMv7. So I
> > add
> > > > this
> > > > > > conditional for ARMv7 only.
> > > > > > > I agree with you we should clean up the code, but it needs a lot of
> > > > effort to
> > > > > > achieve that.
> > > > > > > This patch is going to make the ARMv7 target build successfully
> > during
> > > > this
> > > > > > period.
> > > > > >
> > > > > > I would go the opposite direction.
> > > > > > I think we should remove all warnings disablement like "-Wno-
> > > > something",
> > > > > > and clean the code.
> > > > >
> > > > > Thanks, Thomas.
> > > > >
> > > > > I think it is a compiler issue rather than a code defect in this case, as It
> > > > cannot recognize the '-Waddress-of-packed-member' flag.
> > > > > "arm-linux-gnueabihf-gcc: error: unrecognized command line option '-
> > > > Waddress-of-packed-member'"
> > > > >
> > > > > >
> > > > > > If you want to allow building ARMv7, you can just allow warnings as
> > not
> > > > > > errors.
> > > > > > So we will still see something is wrong but it won't prevent from
> > building.
> > > > >
> > > > > Yes. We did this already, all the alignment issues are emitted as
> > warnings
> > > > on ARMv7.
> > > > > Please see these two commits:
> > > > > 79fa5c2a9992 ("mk: ignore alignment errors for ARMv7")
> > > > > 6433c19105e8 ("mk: generalize strict alignment warning handling")
> > > >
> > > > I don't know what to do with this patch.
> > > > I think it is not how it should work,
> > > > but you say your compiler has a real bug.
> > > Agree with you, however I haven't found a better solution for this issue yet.
> > >
> > > >
> > > > Can you confirm which compiler is it?
> > >
> > > Please check the packet information dumped below, it is the latest version
> > in Ubuntu 18.04 LTS.
> > > $ sudo apt show gcc-arm-linux-gnueabihf
> > > Package: gcc-arm-linux-gnueabihf
> > > Version: 4:7.4.0-1ubuntu2.3
> > > Priority: optional
> > > Section: devel
> > > Source: gcc-defaults (1.176ubuntu2.3)
> > > Origin: Ubuntu
> > >
> > > > Does it prevent to compile even with -Wno-error ?
> > > Yes, it does. I put one piece of the compiling log bellow. Please take a look.
> > >
> > > $ make -j1 CROSS=arm-linux-gnueabihf- T=arm-armv7a-linuxapp-gcc
> > RTE_DEVEL_BUILD=y
> >
> > RTE_DEVEL_BUILD turns on -Werror, while what Thomas is asking about is
> > using the opposite flag "-Wno-error". Can you do a non-developer build or
> > put "-Wno-error" in EXTRA_CFLAGS to test this.
>
> Thanks, Bruce.
> There is no compiling issue for the non-developer build and "-Wno-error" flag build.
Cool, so we can classify this patch as "rejected".
prev parent reply other threads:[~2019-11-27 10:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-11 10:34 Phil Yang
2019-11-11 10:34 ` [dpdk-dev] [PATCH 2/2] doc: add aarch32 build guidance Phil Yang
2020-05-24 21:21 ` Thomas Monjalon
2020-05-25 3:20 ` Phil Yang
2020-05-27 8:28 ` Ruifeng Wang
2020-07-02 5:37 ` Phil Yang
2020-07-02 8:01 ` Jerin Jacob
2019-11-11 10:47 ` [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf architercture Bruce Richardson
2019-11-12 5:25 ` Phil Yang (Arm Technology China)
2019-11-12 6:03 ` Thomas Monjalon
2019-11-12 6:40 ` Phil Yang (Arm Technology China)
2019-11-26 17:01 ` Thomas Monjalon
2019-11-27 8:09 ` Phil Yang (Arm Technology China)
2019-11-27 9:29 ` Bruce Richardson
2019-11-27 10:00 ` Phil Yang (Arm Technology China)
2019-11-27 10:32 ` Thomas Monjalon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5000317.ObS1QFYq1c@xps \
--to=thomas@monjalon.net \
--cc=Gavin.Hu@arm.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=Joyce.Kong@arm.com \
--cc=Phil.Yang@arm.com \
--cc=bruce.richardson@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=nd@arm.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).