[dpdk-dev] [PATCH v5] nfp: report link speed using hardware info

[dpdk-dev] [PATCH v5] nfp: report link speed using hardware info

[Alejandro Lucero]

Previous reported speed was hardcoded because there was not firmware
support for getting this information. This change needs to support old
firmware versions, keeping with the hardcoded report, and the new
versions, where the firmware makes that information available.

v5: Fix missing parenthesis
v4: Make conditional simple and more ellaborated commit comment.
v3: remove unsed macro
v2: use RTE_DIM instead of own macro

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
---
 drivers/net/nfp/nfp_net.c      | 27 +++++++++++++++++++++++++--
 drivers/net/nfp/nfp_net_ctrl.h | 11 +++++++++++
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 2ae7f87..27afbfd 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -816,6 +816,17 @@ static void nfp_net_read_mac(struct nfp_net_hw *hw)
 	struct rte_eth_link link, old;
 	uint32_t nn_link_status;
 
+	static const uint32_t ls_to_ethtool[] = {
+		[NFP_NET_CFG_STS_LINK_RATE_UNSUPPORTED] = ETH_SPEED_NUM_NONE,
+		[NFP_NET_CFG_STS_LINK_RATE_UNKNOWN]     = ETH_SPEED_NUM_NONE,
+		[NFP_NET_CFG_STS_LINK_RATE_1G]          = ETH_SPEED_NUM_1G,
+		[NFP_NET_CFG_STS_LINK_RATE_10G]         = ETH_SPEED_NUM_10G,
+		[NFP_NET_CFG_STS_LINK_RATE_25G]         = ETH_SPEED_NUM_25G,
+		[NFP_NET_CFG_STS_LINK_RATE_40G]         = ETH_SPEED_NUM_40G,
+		[NFP_NET_CFG_STS_LINK_RATE_50G]         = ETH_SPEED_NUM_50G,
+		[NFP_NET_CFG_STS_LINK_RATE_100G]        = ETH_SPEED_NUM_100G,
+	};
+
 	PMD_DRV_LOG(DEBUG, "Link update\n");
 
 	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -831,8 +842,20 @@ static void nfp_net_read_mac(struct nfp_net_hw *hw)
 		link.link_status = ETH_LINK_UP;
 
 	link.link_duplex = ETH_LINK_FULL_DUPLEX;
-	/* Other cards can limit the tx and rx rate per VF */
-	link.link_speed = ETH_SPEED_NUM_40G;
+
+	nn_link_status = (nn_link_status >> NFP_NET_CFG_STS_LINK_RATE_SHIFT) &
+			 NFP_NET_CFG_STS_LINK_RATE_MASK;
+
+	if ((NFD_CFG_MAJOR_VERSION_of(hw->ver) < 4) ||
+	    ((NFD_CFG_MINOR_VERSION_of(hw->ver) == 4) &&
+	    (NFD_CFG_MINOR_VERSION_of(hw->ver) == 0)))
+		link.link_speed = ETH_SPEED_NUM_40G;
+	else {
+		if (nn_link_status >= RTE_DIM(ls_to_ethtool))
+			link.link_speed = ETH_SPEED_NUM_NONE;
+		else
+			link.link_speed = ls_to_ethtool[nn_link_status];
+	}
 
 	if (old.link_status != link.link_status) {
 		nfp_net_dev_atomic_write_link_status(dev, &link);
diff --git a/drivers/net/nfp/nfp_net_ctrl.h b/drivers/net/nfp/nfp_net_ctrl.h
index fce8251..426402b 100644
--- a/drivers/net/nfp/nfp_net_ctrl.h
+++ b/drivers/net/nfp/nfp_net_ctrl.h
@@ -157,6 +157,17 @@
 #define   NFP_NET_CFG_VERSION_MINOR(x)    (((x) & 0xff) <<  0)
 #define NFP_NET_CFG_STS                 0x0034
 #define   NFP_NET_CFG_STS_LINK            (0x1 << 0) /* Link up or down */
+/* Link rate */
+#define   NFP_NET_CFG_STS_LINK_RATE_SHIFT 1
+#define   NFP_NET_CFG_STS_LINK_RATE_MASK  0xF
+#define   NFP_NET_CFG_STS_LINK_RATE_UNSUPPORTED   0
+#define   NFP_NET_CFG_STS_LINK_RATE_UNKNOWN       1
+#define   NFP_NET_CFG_STS_LINK_RATE_1G            2
+#define   NFP_NET_CFG_STS_LINK_RATE_10G           3
+#define   NFP_NET_CFG_STS_LINK_RATE_25G           4
+#define   NFP_NET_CFG_STS_LINK_RATE_40G           5
+#define   NFP_NET_CFG_STS_LINK_RATE_50G           6
+#define   NFP_NET_CFG_STS_LINK_RATE_100G          7
 #define NFP_NET_CFG_CAP                 0x0038
 #define NFP_NET_CFG_MAX_TXRINGS         0x003c
 #define NFP_NET_CFG_MAX_RXRINGS         0x0040
-- 
1.9.1

Re: [dpdk-dev] [PATCH v5] nfp: report link speed using hardware info

[Ferruh Yigit]

On 12/19/2016 12:01 PM, Alejandro Lucero wrote:
> Previous reported speed was hardcoded because there was not firmware
> support for getting this information. This change needs to support old
> firmware versions, keeping with the hardcoded report, and the new
> versions, where the firmware makes that information available.
> 
> v5: Fix missing parenthesis
> v4: Make conditional simple and more ellaborated commit comment.
> v3: remove unsed macro
> v2: use RTE_DIM instead of own macro
> 
> Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>

Applied to dpdk-next-net/master, thanks.