From: "Pei, Andy" <andy.pei@intel.com>
To: "Ye, Xiaolong" <xiaolong.ye@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
"Zhang, Qi Z" <qi.z.zhang@intel.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>,
"Xu, Rosen" <rosen.xu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v4] net/ipn3ke: setup MTU when HW init
Date: Wed, 4 Sep 2019 02:05:59 +0000 [thread overview]
Message-ID: <5941F446C088714A85408FA3132CFCBB0106D572@SHSMSX105.ccr.corp.intel.com> (raw)
In-Reply-To: <20190903133152.GA19294@intel.com>
Hi Xiaolong
OK. I will do that in v5.
-----Original Message-----
From: Ye, Xiaolong
Sent: Tuesday, September 3, 2019 9:32 PM
To: Pei, Andy <andy.pei@intel.com>
Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh <ferruh.yigit@intel.com>; Xu, Rosen <rosen.xu@intel.com>
Subject: Re: [PATCH v4] net/ipn3ke: setup MTU when HW init
On 09/03, Andy Pei wrote:
>set up mtu to the minimun in tx mtu, rx mtu and IPN3KE_MAC_FRAME_SIZE_MAX.
>
>Signed-off-by: Andy Pei <andy.pei@intel.com>
>---
>
>Cc: qi.z.zhang@intel.com
>Cc: ferruh.yigit@intel.com
>Cc: rosen.xu@intel.com
>Cc: xiaolong.ye@intel.com
>
>v2:
>modify low bound and upper bound.
>
>v3:
>delete unnecessary MACROs.
>extract the duplicated code to a common function.
>
>v4:
>delete unnecessary MACROs.
>extract the duplicated code to a common function.
>
> drivers/net/ipn3ke/ipn3ke_ethdev.c | 87
> ++++++++++++++++++++++++++++++++++++++
> drivers/net/ipn3ke/ipn3ke_ethdev.h | 6 +++
> 2 files changed, 93 insertions(+)
>
>diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.c
>b/drivers/net/ipn3ke/ipn3ke_ethdev.c
>index c226d63..e619ba3 100644
>--- a/drivers/net/ipn3ke/ipn3ke_ethdev.c
>+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.c
>@@ -209,6 +209,90 @@
> return 0;
> }
>
>+static uint32_t
>+ipn3ke_mtu_cal(uint32_t tx, uint32_t rx) {
>+ uint32_t tmp;
>+ tmp = RTE_MIN(tx, rx);
>+ tmp = RTE_MAX(tmp, (uint32_t)RTE_ETHER_MIN_MTU);
>+ tmp = RTE_MIN(tmp, (uint32_t)(IPN3KE_MAC_FRAME_SIZE_MAX -
>+ IPN3KE_ETH_OVERHEAD));
>+ return tmp;
>+}
>+
>+static void
>+ipn3ke_mtu_set
>+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel,
>+uint32_t txaddr, uint32_t rxaddr)
It's quite rare to start the arguments in a separate line, better to follow the common convention like
static void
rte_eth_dev_config_restore(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info, uint16_t port_id)
Thanks,
Xiaolong
>+{
>+ uint32_t tx;
>+ uint32_t rx;
>+ uint32_t tmp;
>+
>+ if (!(*hw->f_mac_read) || !(*hw->f_mac_write))
>+ return;
>+
>+ (*hw->f_mac_read)(hw,
>+ &tx,
>+ txaddr,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_read)(hw,
>+ &rx,
>+ rxaddr,
>+ mac_num,
>+ eth_group_sel);
>+
>+ tmp = ipn3ke_mtu_cal(tx, rx);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ txaddr,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ rxaddr,
>+ mac_num,
>+ eth_group_sel);
>+}
>+
>+static void
>+ipn3ke_10G_mtu_setup
>+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel) {
>+ ipn3ke_mtu_set(hw, mac_num, eth_group_sel,
>+ IPN3KE_10G_TX_FRAME_MAXLENGTH, IPN3KE_10G_RX_FRAME_MAXLENGTH); }
>+
>+static void
>+ipn3ke_25G_mtu_setup
>+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel) {
>+ ipn3ke_mtu_set(hw, mac_num, eth_group_sel,
>+ IPN3KE_25G_MAX_TX_SIZE_CONFIG, IPN3KE_25G_MAX_RX_SIZE_CONFIG); }
>+
>+static void
>+ipn3ke_mtu_setup(struct ipn3ke_hw *hw) {
>+ int i;
>+ if (hw->retimer.mac_type == IFPGA_RAWDEV_RETIMER_MAC_TYPE_10GE_XFI) {
>+ for (i = 0; i < hw->port_num; i++) {
>+ ipn3ke_10G_mtu_setup(hw, i, 0);
>+ ipn3ke_10G_mtu_setup(hw, i, 1);
>+ }
>+ } else if (hw->retimer.mac_type ==
>+ IFPGA_RAWDEV_RETIMER_MAC_TYPE_25GE_25GAUI) {
>+ for (i = 0; i < hw->port_num; i++) {
>+ ipn3ke_25G_mtu_setup(hw, i, 0);
>+ ipn3ke_25G_mtu_setup(hw, i, 1);
>+ }
>+ }
>+}
>+
> static int
> ipn3ke_hw_init(struct rte_afu_device *afu_dev,
> struct ipn3ke_hw *hw)
>@@ -303,6 +387,9 @@
> }
> }
>
>+ /* init mtu */
>+ ipn3ke_mtu_setup(hw);
>+
> ret = rte_eth_switch_domain_alloc(&hw->switch_domain_id);
> if (ret)
> IPN3KE_AFU_PMD_WARN("failed to allocate switch domain for device
>%d", diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.h
>b/drivers/net/ipn3ke/ipn3ke_ethdev.h
>index c7b336b..fc45826 100644
>--- a/drivers/net/ipn3ke/ipn3ke_ethdev.h
>+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.h
>@@ -654,6 +654,12 @@ static inline void _ipn3ke_indrct_write(struct
>ipn3ke_hw *hw, #define IPN3KE_MAC_RX_FRAME_MAXLENGTH_MASK \
> IPN3KE_MASK(0xFFFF, IPN3KE_MAC_RX_FRAME_MAXLENGTH_SHIFT)
>
>+#define IPN3KE_25G_MAX_TX_SIZE_CONFIG 0x407
>+#define IPN3KE_25G_MAX_RX_SIZE_CONFIG 0x506
>+
>+#define IPN3KE_10G_TX_FRAME_MAXLENGTH 0x002C
>+#define IPN3KE_10G_RX_FRAME_MAXLENGTH 0x00AE
>+
> #define IPN3KE_REGISTER_WIDTH 32
>
> /*Bits[2:0]: Configuration of TX statistics counters:
>--
>1.8.3.1
>
next prev parent reply other threads:[~2019-09-04 2:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 9:12 [dpdk-dev] [PATCH] " Andy Pei
2019-08-08 16:01 ` [dpdk-dev] [PATCH v2] " Andy Pei
2019-08-21 6:15 ` Ye Xiaolong
2019-09-02 3:01 ` Pei, Andy
2019-09-02 2:54 ` [dpdk-dev] [PATCH v3] " Andy Pei
2019-09-02 9:23 ` Ye Xiaolong
2019-09-03 2:34 ` Pei, Andy
2019-09-03 6:23 ` Ye Xiaolong
2019-09-03 6:29 ` Pei, Andy
2019-09-03 8:35 ` Ye Xiaolong
2019-09-03 8:46 ` Pei, Andy
2019-09-03 8:46 ` [dpdk-dev] [PATCH v4] " Andy Pei
2019-09-03 13:31 ` Ye Xiaolong
2019-09-04 2:05 ` Pei, Andy [this message]
2019-09-04 1:52 ` [dpdk-dev] [PATCH v5] " Andy Pei
2019-09-18 9:00 ` Ye Xiaolong
2019-09-24 8:59 ` Xu, Rosen
2019-09-24 9:38 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5941F446C088714A85408FA3132CFCBB0106D572@SHSMSX105.ccr.corp.intel.com \
--to=andy.pei@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=rosen.xu@intel.com \
--cc=xiaolong.ye@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).