DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Ori Kam <orika@mellanox.com>,
	Declan Doherty <declan.doherty@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>, Matan Azrad <matan@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to rte_flow
Date: Thu, 26 Apr 2018 15:27:37 +0100	[thread overview]
Message-ID: <5f430dca-6cfe-76e2-9250-415d41aac295@intel.com> (raw)
In-Reply-To: <AM4PR05MB34255B8121CDFA80FACC94CBDB8E0@AM4PR05MB3425.eurprd05.prod.outlook.com>

On 4/26/2018 3:06 PM, Ori Kam wrote:
> Hi Declan,
> 
> You are changing API (port_flow_query) which is in use in
> both MLX5 and MLX4 this results in breaking the build.

Hi Ori,

Do you mean "rte_flow_query"? port_flow_query() is a function in testpmd, how
mlx is using it?

> 
> Best,
> Ori
> 
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Declan Doherty
>> Sent: Thursday, April 26, 2018 3:08 PM
>> To: dev@dpdk.org
>> Cc: Ferruh Yigit <ferruh.yigit@intel.com>; Declan Doherty
>> <declan.doherty@intel.com>
>> Subject: [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to
>> rte_flow
>>
>> Add rte_flow_action_count action data structure to enable shared
>> counters across multiple flows on a single port or across multiple
>> flows on multiple ports within the same switch domain. Also this enables
>> multiple count actions to be specified in a single flow action.
>>
>> This patch also modifies the existing rte_flow_query API to take the
>> rte_flow_action structure as an input parameter instead of the
>> rte_flow_action_type enumeration to allow querying a specific action
>> from a flow rule when multiple actions of the same type are specified.
>>
>> This patch also contains updates for the bonding and failsafe PMDs and
>> testpmd application which are affected by this API change.
>>
>> Signed-off-by: Declan Doherty <declan.doherty@intel.com>
>> ---
>>  app/test-pmd/cmdline_flow.c             |  6 ++--
>>  app/test-pmd/config.c                   | 15 +++++----
>>  app/test-pmd/testpmd.h                  |  2 +-
>>  doc/guides/prog_guide/rte_flow.rst      | 59 +++++++++++++++++++++------
>> ------
>>  drivers/net/bonding/rte_eth_bond_flow.c |  9 ++---
>>  drivers/net/failsafe/failsafe_flow.c    |  4 +--
>>  lib/librte_ether/rte_flow.c             |  2 +-
>>  lib/librte_ether/rte_flow.h             | 38 +++++++++++++++++++--
>>  lib/librte_ether/rte_flow_driver.h      |  2 +-
>>  9 files changed, 93 insertions(+), 44 deletions(-)
>>
>> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
>> index 1ac04a0ab..5754e7858 100644
>> --- a/app/test-pmd/cmdline_flow.c
>> +++ b/app/test-pmd/cmdline_flow.c
>> @@ -420,7 +420,7 @@ struct buffer {
>>  		} destroy; /**< Destroy arguments. */
>>  		struct {
>>  			uint32_t rule;
>> -			enum rte_flow_action_type action;
>> +			struct rte_flow_action action;
>>  		} query; /**< Query arguments. */
>>  		struct {
>>  			uint32_t *group;
>> @@ -1101,7 +1101,7 @@ static const struct token token_list[] = {
>>  		.next = NEXT(NEXT_ENTRY(QUERY_ACTION),
>>  			     NEXT_ENTRY(RULE_ID),
>>  			     NEXT_ENTRY(PORT_ID)),
>> -		.args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
>> +		.args = ARGS(ARGS_ENTRY(struct buffer,
>> args.query.action.type),
>>  			     ARGS_ENTRY(struct buffer, args.query.rule),
>>  			     ARGS_ENTRY(struct buffer, port)),
>>  		.call = parse_query,
>> @@ -3842,7 +3842,7 @@ cmd_flow_parsed(const struct buffer *in)
>>  		break;
>>  	case QUERY:
>>  		port_flow_query(in->port, in->args.query.rule,
>> -				in->args.query.action);
>> +				&in->args.query.action);
>>  		break;
>>  	case LIST:
>>  		port_flow_list(in->port, in->args.list.group_n,
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
>> index 0f2425229..cd6102dfc 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -1452,7 +1452,7 @@ port_flow_flush(portid_t port_id)
>>  /** Query a flow rule. */
>>  int
>>  port_flow_query(portid_t port_id, uint32_t rule,
>> -		enum rte_flow_action_type action)
>> +		const struct rte_flow_action *action)
>>  {
>>  	struct rte_flow_error error;
>>  	struct rte_port *port;
>> @@ -1474,15 +1474,16 @@ port_flow_query(portid_t port_id, uint32_t rule,
>>  		return -ENOENT;
>>  	}
>>  	if ((unsigned int)action >= RTE_DIM(flow_action) ||
>> -	    !flow_action[action].name)
>> +	    !flow_action[action->type].name)
>>  		name = "unknown";
>>  	else
>> -		name = flow_action[action].name;
>> -	switch (action) {
>> +		name = flow_action[action->type].name;
>> +	switch (action->type) {
>>  	case RTE_FLOW_ACTION_TYPE_COUNT:
>>  		break;
>>  	default:
>> -		printf("Cannot query action type %d (%s)\n", action, name);
>> +		printf("Cannot query action type %d (%s)\n",
>> +			action->type, name);
>>  		return -ENOTSUP;
>>  	}
>>  	/* Poisoning to make sure PMDs update it in case of error. */
>> @@ -1490,7 +1491,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
>>  	memset(&query, 0, sizeof(query));
>>  	if (rte_flow_query(port_id, pf->flow, action, &query, &error))
>>  		return port_flow_complain(&error);
>> -	switch (action) {
>> +	switch (action->type) {
>>  	case RTE_FLOW_ACTION_TYPE_COUNT:
>>  		printf("%s:\n"
>>  		       " hits_set: %u\n"
>> @@ -1505,7 +1506,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
>>  		break;
>>  	default:
>>  		printf("Cannot display result for action type %d (%s)\n",
>> -		       action, name);
>> +		       action->type, name);
>>  		break;
>>  	}
>>  	return 0;
>> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
>> index a33b525e2..1af87b8f4 100644
>> --- a/app/test-pmd/testpmd.h
>> +++ b/app/test-pmd/testpmd.h
>> @@ -620,7 +620,7 @@ int port_flow_create(portid_t port_id,
>>  int port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t *rule);
>>  int port_flow_flush(portid_t port_id);
>>  int port_flow_query(portid_t port_id, uint32_t rule,
>> -		    enum rte_flow_action_type action);
>> +		    const struct rte_flow_action *action);
>>  void port_flow_list(portid_t port_id, uint32_t n, const uint32_t *group);
>>  int port_flow_isolate(portid_t port_id, int set);
>>
>> diff --git a/doc/guides/prog_guide/rte_flow.rst
>> b/doc/guides/prog_guide/rte_flow.rst
>> index 301f8762e..88bfc87eb 100644
>> --- a/doc/guides/prog_guide/rte_flow.rst
>> +++ b/doc/guides/prog_guide/rte_flow.rst
>> @@ -1277,17 +1277,19 @@ Actions are performed in list order:
>>
>>  .. table:: Mark, count then redirect
>>
>> -   +-------+--------+-----------+-------+
>> -   | Index | Action | Field     | Value |
>> -   +=======+========+===========+=======+
>> -   | 0     | MARK   | ``mark``  | 0x2a  |
>> -   +-------+--------+-----------+-------+
>> -   | 1     | COUNT                      |
>> -   +-------+--------+-----------+-------+
>> -   | 2     | QUEUE  | ``queue`` | 10    |
>> -   +-------+--------+-----------+-------+
>> -   | 3     | END                        |
>> -   +-------+----------------------------+
>> +   +-------+--------+------------+-------+
>> +   | Index | Action | Field      | Value |
>> +   +=======+========+============+=======+
>> +   | 0     | MARK   | ``mark``   | 0x2a  |
>> +   +-------+--------+------------+-------+
>> +   | 1     | COUNT  | ``shared`` | 0     |
>> +   |       |        +------------+-------+
>> +   |       |        | ``id``     | 0     |
>> +   +-------+--------+------------+-------+
>> +   | 2     | QUEUE  | ``queue``  | 10    |
>> +   +-------+--------+------------+-------+
>> +   | 3     | END                         |
>> +   +-------+-----------------------------+
>>
>>  |
>>
>> @@ -1516,23 +1518,36 @@ Drop packets.
>>  Action: ``COUNT``
>>  ^^^^^^^^^^^^^^^^^
>>
>> -Enables counters for this rule.
>> +Adds a counter action to a matched flow.
>> +
>> +If more than one count action is specified in a single flow rule, then each
>> +action must specify a unique id.
>>
>> -These counters can be retrieved and reset through ``rte_flow_query()``, see
>> +Counters can be retrieved and reset through ``rte_flow_query()``, see
>>  ``struct rte_flow_query_count``.
>>
>> -- Counters can be retrieved with ``rte_flow_query()``.
>> -- No configurable properties.
>> +The shared flag indicates whether the counter is unique to the flow rule the
>> +action is specified with, or whether it is a shared counter.
>> +
>> +For a count action with the shared flag set, then then a global device
>> +namespace is assumed for the counter id, so that any matched flow rules
>> using
>> +a count action with the same counter id on the same port will contribute to
>> +that counter.
>> +
>> +For ports within the same switch domain then the counter id namespace
>> extends
>> +to all ports within that switch domain.
>>
>>  .. _table_rte_flow_action_count:
>>
>>  .. table:: COUNT
>>
>> -   +---------------+
>> -   | Field         |
>> -   +===============+
>> -   | no properties |
>> -   +---------------+
>> +   +------------+---------------------+
>> +   | Field      | Value               |
>> +   +============+=====================+
>> +   | ``shared`` | shared counter flag |
>> +   +------------+---------------------+
>> +   | ``id``     | counter id          |
>> +   +------------+---------------------+
>>
>>  Query structure to retrieve and reset flow rule counters:
>>
>> @@ -2282,7 +2297,7 @@ definition.
>>     int
>>     rte_flow_query(uint16_t port_id,
>>                    struct rte_flow *flow,
>> -                  enum rte_flow_action_type action,
>> +                  const struct rte_flow_action *action,
>>                    void *data,
>>                    struct rte_flow_error *error);
>>
>> @@ -2290,7 +2305,7 @@ Arguments:
>>
>>  - ``port_id``: port identifier of Ethernet device.
>>  - ``flow``: flow rule handle to query.
>> -- ``action``: action type to query.
>> +- ``action``: action to query, this must match prototype from flow rule.
>>  - ``data``: pointer to storage for the associated query data type.
>>  - ``error``: perform verbose error reporting if not NULL. PMDs initialize
>>    this structure in case of error only.
>> diff --git a/drivers/net/bonding/rte_eth_bond_flow.c
>> b/drivers/net/bonding/rte_eth_bond_flow.c
>> index 8093c04f5..31e4bcaeb 100644
>> --- a/drivers/net/bonding/rte_eth_bond_flow.c
>> +++ b/drivers/net/bonding/rte_eth_bond_flow.c
>> @@ -152,6 +152,7 @@ bond_flow_flush(struct rte_eth_dev *dev, struct
>> rte_flow_error *err)
>>
>>  static int
>>  bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow *flow,
>> +		      const struct rte_flow_action *action,
>>  		      struct rte_flow_query_count *count,
>>  		      struct rte_flow_error *err)
>>  {
>> @@ -165,7 +166,7 @@ bond_flow_query_count(struct rte_eth_dev *dev,
>> struct rte_flow *flow,
>>  	rte_memcpy(&slave_count, count, sizeof(slave_count));
>>  	for (i = 0; i < internals->slave_count; i++) {
>>  		ret = rte_flow_query(internals->slaves[i].port_id,
>> -				     flow->flows[i],
>> RTE_FLOW_ACTION_TYPE_COUNT,
>> +				     flow->flows[i], action,
>>  				     &slave_count, err);
>>  		if (unlikely(ret != 0)) {
>>  			RTE_BOND_LOG(ERR, "Failed to query flow on"
>> @@ -182,12 +183,12 @@ bond_flow_query_count(struct rte_eth_dev *dev,
>> struct rte_flow *flow,
>>
>>  static int
>>  bond_flow_query(struct rte_eth_dev *dev, struct rte_flow *flow,
>> -		enum rte_flow_action_type type, void *arg,
>> +		const struct rte_flow_action *action, void *arg,
>>  		struct rte_flow_error *err)
>>  {
>> -	switch (type) {
>> +	switch (action->type) {
>>  	case RTE_FLOW_ACTION_TYPE_COUNT:
>> -		return bond_flow_query_count(dev, flow, arg, err);
>> +		return bond_flow_query_count(dev, flow, action, arg, err);
>>  	default:
>>  		return rte_flow_error_set(err, ENOTSUP,
>>  					  RTE_FLOW_ERROR_TYPE_ACTION,
>> arg,
>> diff --git a/drivers/net/failsafe/failsafe_flow.c
>> b/drivers/net/failsafe/failsafe_flow.c
>> index a97f4075d..bfe42fcee 100644
>> --- a/drivers/net/failsafe/failsafe_flow.c
>> +++ b/drivers/net/failsafe/failsafe_flow.c
>> @@ -174,7 +174,7 @@ fs_flow_flush(struct rte_eth_dev *dev,
>>  static int
>>  fs_flow_query(struct rte_eth_dev *dev,
>>  	      struct rte_flow *flow,
>> -	      enum rte_flow_action_type type,
>> +	      const struct rte_flow_action *action,
>>  	      void *arg,
>>  	      struct rte_flow_error *error)
>>  {
>> @@ -185,7 +185,7 @@ fs_flow_query(struct rte_eth_dev *dev,
>>  	if (sdev != NULL) {
>>  		int ret = rte_flow_query(PORT_ID(sdev),
>>  					 flow->flows[SUB_ID(sdev)],
>> -					 type, arg, error);
>> +					 action, arg, error);
>>
>>  		if ((ret = fs_err(sdev, ret))) {
>>  			fs_unlock(dev, 0);
>> diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
>> index 4f94ac9b5..7947529da 100644
>> --- a/lib/librte_ether/rte_flow.c
>> +++ b/lib/librte_ether/rte_flow.c
>> @@ -233,7 +233,7 @@ rte_flow_flush(uint16_t port_id,
>>  int
>>  rte_flow_query(uint16_t port_id,
>>  	       struct rte_flow *flow,
>> -	       enum rte_flow_action_type action,
>> +	       const struct rte_flow_action *action,
>>  	       void *data,
>>  	       struct rte_flow_error *error)
>>  {
>> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
>> index d390bbf5a..f8ba71cdb 100644
>> --- a/lib/librte_ether/rte_flow.h
>> +++ b/lib/librte_ether/rte_flow.h
>> @@ -1314,7 +1314,7 @@ enum rte_flow_action_type {
>>  	 * These counters can be retrieved and reset through
>> rte_flow_query(),
>>  	 * see struct rte_flow_query_count.
>>  	 *
>> -	 * No associated configuration structure.
>> +	 * See struct rte_flow_action_count.
>>  	 */
>>  	RTE_FLOW_ACTION_TYPE_COUNT,
>>
>> @@ -1546,6 +1546,38 @@ struct rte_flow_action_queue {
>>  	uint16_t index; /**< Queue index to use. */
>>  };
>>
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this structure may change without prior notice
>> + *
>> + * RTE_FLOW_ACTION_TYPE_COUNT
>> + *
>> + * Adds a counter action to a matched flow.
>> + *
>> + * If more than one count action is specified in a single flow rule, then each
>> + * action must specify a unique id.
>> + *
>> + * Counters can be retrieved and reset through ``rte_flow_query()``, see
>> + * ``struct rte_flow_query_count``.
>> + *
>> + * The shared flag indicates whether the counter is unique to the flow rule
>> the
>> + * action is specified with, or whether it is a shared counter.
>> + *
>> + * For a count action with the shared flag set, then then a global device
>> + * namespace is assumed for the counter id, so that any matched flow rules
>> using
>> + * a count action with the same counter id on the same port will contribute
>> to
>> + * that counter.
>> + *
>> + * For ports within the same switch domain then the counter id namespace
>> extends
>> + * to all ports within that switch domain.
>> + */
>> +struct rte_flow_action_count {
>> +	uint32_t shared:1; /**< Share counter ID with other flow rules. */
>> +	uint32_t reserved:31; /**< Reserved, must be zero. */
>> +	uint32_t id; /**< Counter ID. */
>> +};
>> +
>>  /**
>>   * RTE_FLOW_ACTION_TYPE_COUNT (query)
>>   *
>> @@ -2044,7 +2076,7 @@ rte_flow_flush(uint16_t port_id,
>>   * @param flow
>>   *   Flow rule handle to query.
>>   * @param action
>> - *   Action type to query.
>> + *   Action definition as defined in original flow rule.
>>   * @param[in, out] data
>>   *   Pointer to storage for the associated query data type.
>>   * @param[out] error
>> @@ -2057,7 +2089,7 @@ rte_flow_flush(uint16_t port_id,
>>  int
>>  rte_flow_query(uint16_t port_id,
>>  	       struct rte_flow *flow,
>> -	       enum rte_flow_action_type action,
>> +	       const struct rte_flow_action *action,
>>  	       void *data,
>>  	       struct rte_flow_error *error);
>>
>> diff --git a/lib/librte_ether/rte_flow_driver.h
>> b/lib/librte_ether/rte_flow_driver.h
>> index 3800310ba..1c90c600d 100644
>> --- a/lib/librte_ether/rte_flow_driver.h
>> +++ b/lib/librte_ether/rte_flow_driver.h
>> @@ -88,7 +88,7 @@ struct rte_flow_ops {
>>  	int (*query)
>>  		(struct rte_eth_dev *,
>>  		 struct rte_flow *,
>> -		 enum rte_flow_action_type,
>> +		 const struct rte_flow_action *,
>>  		 void *,
>>  		 struct rte_flow_error *);
>>  	/** See rte_flow_isolate(). */
>> --
>> 2.14.3
> 

  reply	other threads:[~2018-04-26 14:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-26 12:08 [dpdk-dev] [PATCH v6 0/4] additions to support tunnel encap/decap Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 1/4] ethdev: Add tunnel encap/decap actions Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 2/4] ethdev: Add group JUMP action Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 3/4] ethdev: add mark flow item to rte_flow_item_types Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to rte_flow Declan Doherty
2018-04-26 14:06   ` Ori Kam
2018-04-26 14:27     ` Ferruh Yigit [this message]
2018-04-26 14:43       ` Ori Kam
2018-04-26 14:48         ` Doherty, Declan
2018-04-26 17:29 ` [dpdk-dev] [PATCH v7 0/4] " Declan Doherty
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 1/4] ethdev: Add tunnel encap/decap actions Declan Doherty
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 2/4] ethdev: Add group JUMP action Declan Doherty
2018-04-26 18:54     ` Thomas Monjalon
2018-04-27 12:24       ` Ferruh Yigit
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 3/4] ethdev: add mark flow item to rte_flow_item_types Declan Doherty
2018-04-26 18:52     ` Thomas Monjalon
2018-04-27 12:24       ` Ferruh Yigit
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 4/4] ethdev: add shared counter support to rte_flow Declan Doherty
2018-04-26 18:55     ` Thomas Monjalon
2018-04-27 12:25       ` Ferruh Yigit
2018-04-27 14:52         ` Ferruh Yigit
2018-04-26 20:58   ` [dpdk-dev] [PATCH v7 0/4] " Ferruh Yigit
2018-04-27 20:18 ` [dpdk-dev] [PATCH v6 0/4] additions to support tunnel encap/decap Michael Wildt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5f430dca-6cfe-76e2-9250-415d41aac295@intel.com \
    --to=ferruh.yigit@intel.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=orika@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).