DPDK patches and discussions
 help / color / mirror / Atom feed
From: Mike DeVico <mdevico@xcom-labs.com>
To: Jeff Weeks <jweeks@sandvine.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	Beilei Xing <beilei.xing@intel.com>,
	Qi Zhang <qi.z.zhang@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Konstantin Ananyev <konstantin.ananyev@intel.com>,
	"ferruh.yigit@intel.com" <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] Issue with DCB with X710 Quad 10Gb NIC
Date: Thu, 12 Sep 2019 18:10:24 +0000	[thread overview]
Message-ID: <61798E93-724B-4BE6-A03C-63B274E71AD2@xcom-tech.com> (raw)
In-Reply-To: <b9318aa4f0a943958171cc6fc53a010f@sandvine.com>

Hi Jeff,

Thanks for chiming in...

Yeah, In my case I get the packets, but they end up being put in queue 0 instead of 2.

--Mike

From: Jeff Weeks <jweeks@sandvine.com>
Date: Thursday, September 12, 2019 at 10:47 AM
To: Mike DeVico <mdevico@xcom-labs.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Beilei Xing <beilei.xing@intel.com>, Qi Zhang <qi.z.zhang@intel.com>, Bruce Richardson <bruce.richardson@intel.com>, Konstantin Ananyev <konstantin.ananyev@intel.com>, "ferruh.yigit@intel.com" <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] Issue with DCB with X710 Quad 10Gb NIC

[EXTERNAL SENDER]

I don't have much else to add, except that I also see dcb fail on the same NIC:



  i40e_dcb_init_configure(): default dcb config fails. err = -53, aq_err = 3.



My card doesn't receive any packets, though; not sure if it's related to this, or not.



--Jeff

________________________________
/dev/jeff_weeks.x2936
Sandvine Incorporated

________________________________
From: dev <dev-bounces@dpdk.org> on behalf of Mike DeVico <mdevico@xcom-labs.com>
Sent: Thursday, September 12, 2019 1:06 PM
To: Thomas Monjalon
Cc: dev@dpdk.org; Beilei Xing; Qi Zhang; Bruce Richardson; Konstantin Ananyev; ferruh.yigit@intel.com
Subject: Re: [dpdk-dev] Issue with DCB with X710 Quad 10Gb NIC

[EXTERNAL]

Still no hits...

--Mike

On 9/9/19, 1:39 PM, "Thomas Monjalon" <thomas@monjalon.net> wrote:

    [EXTERNAL SENDER]

    Adding i40e maintainers and few more.

    07/09/2019 01:11, Mike DeVico:
    > Hello,
    >
    > I am having an issue getting the DCB feature to work with an Intel
    > X710 Quad SFP+ NIC.
    >
    > Here’s my setup:
    >
    > 1.      DPDK 18.08 built with the following I40E configs:
    >
    > CONFIG_RTE_LIBRTE_I40E_PMD=y
    > CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
    > CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
    > CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
    > CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
    > CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
    > CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
    > CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
    > CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=8
    >
    > 2.      /opt/dpdk-18.08/usertools/dpdk-devbind.py --status-dev net
    >
    > Network devices using DPDK-compatible driver
    > ============================================
    > 0000:3b:00.0 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio unused=i40e
    > 0000:3b:00.1 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio unused=i40e
    > 0000:3b:00.2 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio unused=i40e
    > 0000:3b:00.3 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio unused=i40e
    >
    >        Network devices using kernel driver
    >        ===================================
    >        0000:02:00.0 'I350 Gigabit Network Connection 1521' if=enp2s0f0 drv=igb unused=igb_uio *Active*
    >        0000:02:00.1 'I350 Gigabit Network Connection 1521' if=enp2s0f1 drv=igb unused=igb_uio *Active*
    >
    >        Other Network devices
    >        =====================
    >        <none>
    >
    > 3.      We have a custom FPGA board connected to port 1 of the X710 NIC that’s broadcasting
    > a packet tagged with VLAN 1 and PCP 2.
    >
    > 4.      I use the vmdq_dcb example app and configure the card with 16 pools/8 queue each
    > as follows:
    >        sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
    >
    >
    > The apps starts up fine and successfully probes the card as shown below:
    >
    > sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
    > EAL: Detected 80 lcore(s)
    > EAL: Detected 2 NUMA nodes
    > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
    > EAL: Probing VFIO support...
    > EAL: PCI device 0000:02:00.0 on NUMA socket 0
    > EAL:   probe driver: 8086:1521 net_e1000_igb
    > EAL: PCI device 0000:02:00.1 on NUMA socket 0
    > EAL:   probe driver: 8086:1521 net_e1000_igb
    > EAL: PCI device 0000:3b:00.0 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.1 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.2 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.3 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > vmdq queue base: 64 pool base 1
    > Configured vmdq pool num: 16, each vmdq pool has 8 queues
    > Port 0 MAC: e8 ea 6a 27 b5 4d
    > Port 0 vmdq pool 0 set mac 52:54:00:12:00:00
    > Port 0 vmdq pool 1 set mac 52:54:00:12:00:01
    > Port 0 vmdq pool 2 set mac 52:54:00:12:00:02
    > Port 0 vmdq pool 3 set mac 52:54:00:12:00:03
    > Port 0 vmdq pool 4 set mac 52:54:00:12:00:04
    > Port 0 vmdq pool 5 set mac 52:54:00:12:00:05
    > Port 0 vmdq pool 6 set mac 52:54:00:12:00:06
    > Port 0 vmdq pool 7 set mac 52:54:00:12:00:07
    > Port 0 vmdq pool 8 set mac 52:54:00:12:00:08
    > Port 0 vmdq pool 9 set mac 52:54:00:12:00:09
    > Port 0 vmdq pool 10 set mac 52:54:00:12:00:0a
    > Port 0 vmdq pool 11 set mac 52:54:00:12:00:0b
    > Port 0 vmdq pool 12 set mac 52:54:00:12:00:0c
    > Port 0 vmdq pool 13 set mac 52:54:00:12:00:0d
    > Port 0 vmdq pool 14 set mac 52:54:00:12:00:0e
    > Port 0 vmdq pool 15 set mac 52:54:00:12:00:0f
    > vmdq queue base: 64 pool base 1
    > Configured vmdq pool num: 16, each vmdq pool has 8 queues
    > Port 1 MAC: e8 ea 6a 27 b5 4e
    > Port 1 vmdq pool 0 set mac 52:54:00:12:01:00
    > Port 1 vmdq pool 1 set mac 52:54:00:12:01:01
    > Port 1 vmdq pool 2 set mac 52:54:00:12:01:02
    > Port 1 vmdq pool 3 set mac 52:54:00:12:01:03
    > Port 1 vmdq pool 4 set mac 52:54:00:12:01:04
    > Port 1 vmdq pool 5 set mac 52:54:00:12:01:05
    > Port 1 vmdq pool 6 set mac 52:54:00:12:01:06
    > Port 1 vmdq pool 7 set mac 52:54:00:12:01:07
    > Port 1 vmdq pool 8 set mac 52:54:00:12:01:08
    > Port 1 vmdq pool 9 set mac 52:54:00:12:01:09
    > Port 1 vmdq pool 10 set mac 52:54:00:12:01:0a
    > Port 1 vmdq pool 11 set mac 52:54:00:12:01:0b
    > Port 1 vmdq pool 12 set mac 52:54:00:12:01:0c
    > Port 1 vmdq pool 13 set mac 52:54:00:12:01:0d
    > Port 1 vmdq pool 14 set mac 52:54:00:12:01:0e
    > Port 1 vmdq pool 15 set mac 52:54:00:12:01:0f
    >
    > Skipping disabled port 2
    >
    > Skipping disabled port 3
    > Core 0(lcore 1) reading queues 64-191
    >
    > However, when I issue the SIGHUP I see that the packets
    > are being put into the first queue of Pool 1 as follows:
    >
    > Pool 0: 0 0 0 0 0 0 0 0
    > Pool 1: 10 0 0 0 0 0 0 0
    > Pool 2: 0 0 0 0 0 0 0 0
    > Pool 3: 0 0 0 0 0 0 0 0
    > Pool 4: 0 0 0 0 0 0 0 0
    > Pool 5: 0 0 0 0 0 0 0 0
    > Pool 6: 0 0 0 0 0 0 0 0
    > Pool 7: 0 0 0 0 0 0 0 0
    > Pool 8: 0 0 0 0 0 0 0 0
    > Pool 9: 0 0 0 0 0 0 0 0
    > Pool 10: 0 0 0 0 0 0 0 0
    > Pool 11: 0 0 0 0 0 0 0 0
    > Pool 12: 0 0 0 0 0 0 0 0
    > Pool 13: 0 0 0 0 0 0 0 0
    > Pool 14: 0 0 0 0 0 0 0 0
    > Pool 15: 0 0 0 0 0 0 0 0
    > Finished handling signal 1
    >
    > Since the packets are being tagged with PCP 2 they should be getting
    > mapped to 3rd queue of Pool 1, right?
    >
    > As a sanity check, I tried the same test using an 82599ES 2 port 10GB NIC and
    > the packets show up in the expected queue. (Note, to get it to work I had
    > to modify the vmdq_dcb app to set the vmdq pool MACs to all FF’s)
    >
    > Here’s that setup:
    >
    > /opt/dpdk-18.08/usertools/dpdk-devbind.py --status-dev net
    >
    > Network devices using DPDK-compatible driver
    > ============================================
    > 0000:af:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb' drv=igb_uio unused=ixgbe
    > 0000:af:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb' drv=igb_uio unused=ixgbe
    >
    > Network devices using kernel driver
    > ===================================
    > 0000:02:00.0 'I350 Gigabit Network Connection 1521' if=enp2s0f0 drv=igb unused=igb_uio *Active*
    > 0000:02:00.1 'I350 Gigabit Network Connection 1521' if=enp2s0f1 drv=igb unused=igb_uio *Active*
    > 0000:3b:00.0 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f0 drv=i40e unused=igb_uio
    > 0000:3b:00.1 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f1 drv=i40e unused=igb_uio
    > 0000:3b:00.2 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f2 drv=i40e unused=igb_uio
    > 0000:3b:00.3 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f3 drv=i40e unused=igb_uio
    >
    > Other Network devices
    > =====================
    > <none>
    >
    > sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
    > EAL: Detected 80 lcore(s)
    > EAL: Detected 2 NUMA nodes
    > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
    > EAL: Probing VFIO support...
    > EAL: PCI device 0000:02:00.0 on NUMA socket 0
    > EAL:   probe driver: 8086:1521 net_e1000_igb
    > EAL: PCI device 0000:02:00.1 on NUMA socket 0
    > EAL:   probe driver: 8086:1521 net_e1000_igb
    > EAL: PCI device 0000:3b:00.0 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.1 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.2 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:3b:00.3 on NUMA socket 0
    > EAL:   probe driver: 8086:1572 net_i40e
    > EAL: PCI device 0000:af:00.0 on NUMA socket 1
    > EAL:   probe driver: 8086:10fb net_ixgbe
    > EAL: PCI device 0000:af:00.1 on NUMA socket 1
    > EAL:   probe driver: 8086:10fb net_ixgbe
    > vmdq queue base: 0 pool base 0
    > Port 0 MAC: 00 1b 21 bf 71 24
    > Port 0 vmdq pool 0 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 1 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 2 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 3 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 4 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 5 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 6 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 7 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 8 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 9 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 10 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 11 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 12 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 13 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 14 set mac ff:ff:ff:ff:ff:ff
    > Port 0 vmdq pool 15 set mac ff:ff:ff:ff:ff:ff
    > vmdq queue base: 0 pool base 0
    > Port 1 MAC: 00 1b 21 bf 71 26
    > Port 1 vmdq pool 0 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 1 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 2 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 3 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 4 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 5 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 6 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 7 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 8 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 9 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 10 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 11 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 12 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 13 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 14 set mac ff:ff:ff:ff:ff:ff
    > Port 1 vmdq pool 15 set mac ff:ff:ff:ff:ff:ff
    >
    > Now when I send the SIGHUP, I see the packets being routed to
    > the expected queue:
    >
    > Pool 0: 0 0 0 0 0 0 0 0
    > Pool 1: 0 0 58 0 0 0 0 0
    > Pool 2: 0 0 0 0 0 0 0 0
    > Pool 3: 0 0 0 0 0 0 0 0
    > Pool 4: 0 0 0 0 0 0 0 0
    > Pool 5: 0 0 0 0 0 0 0 0
    > Pool 6: 0 0 0 0 0 0 0 0
    > Pool 7: 0 0 0 0 0 0 0 0
    > Pool 8: 0 0 0 0 0 0 0 0
    > Pool 9: 0 0 0 0 0 0 0 0
    > Pool 10: 0 0 0 0 0 0 0 0
    > Pool 11: 0 0 0 0 0 0 0 0
    > Pool 12: 0 0 0 0 0 0 0 0
    > Pool 13: 0 0 0 0 0 0 0 0
    > Pool 14: 0 0 0 0 0 0 0 0
    > Pool 15: 0 0 0 0 0 0 0 0
    > Finished handling signal 1
    >
    > What am I missing?
    >
    > Thankyou in advance,
    > --Mike
    >
    >







  reply	other threads:[~2019-09-12 18:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 23:11 Mike DeVico
2019-09-09 20:39 ` Thomas Monjalon
2019-09-12 17:06   ` Mike DeVico
2019-09-12 17:46     ` Jeff Weeks
2019-09-12 18:10       ` Mike DeVico [this message]
2019-09-26 16:02         ` Zhang, Helin
  -- strict thread matches above, loose matches on Subject: below --
2019-08-14 17:53 Mike DeVico

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=61798E93-724B-4BE6-A03C-63B274E71AD2@xcom-tech.com \
    --to=mdevico@xcom-labs.com \
    --cc=beilei.xing@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jweeks@sandvine.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=qi.z.zhang@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).