* [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters
@ 2017-05-27 3:46 Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards Rahul Lakkireddy
` (14 more replies)
0 siblings, 15 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
This series of patches add support for Chelsio T6 family of adapters.
Patches 1 - 4 update CXGBE PMD to detect and run Chelsio T6 cards.
Patches 5 - 6 add new link speeds and update port modules.
Patch 7 updates information prints to accommodate Chelsio T6 cards.
Patch 8 updates TX path to reflect Chelsio T6 changes.
Patches 9 - 11 update RX path to reflect Chelsio T6 changes.
Patch 12 updates port statistics to not accumulate pause frames
as part of packet count and also fixes issue with rx counters.
Patch 13 removes RTE_PCI_DRV_INTR_LSC flag from CXGBE PMD since
it doesn't handle direct LSC interrupts.
Thanks,
Rahul
Rahul Lakkireddy (13):
cxgbe: add support to run Chelsio T6 cards
cxgbe: update register dump
cxgbe: update flash part information
cxgbe: grab available ports after firmware reset
cxgbe: update link speeds and port modules
cxgbe: add forward error correction support
cxgbe: update hardware info prints
cxgbe: update TX path for Chelsio T6
cxgbe: update RXQ channel mapping for Chelsio T6
cxgbe: update RX path for Chelsio T6
cxgbe: add compressed error vector
cxgbe: fix port statistics
cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags
doc/guides/nics/cxgbe.rst | 41 +-
doc/guides/rel_notes/release_17_08.rst | 4 +
drivers/net/cxgbe/base/adapter.h | 4 +-
drivers/net/cxgbe/base/common.h | 30 +-
drivers/net/cxgbe/base/t4_chip_type.h | 11 +-
drivers/net/cxgbe/base/t4_hw.c | 1160 +++++++++++++++++++++++++++++--
drivers/net/cxgbe/base/t4_hw.h | 18 +-
drivers/net/cxgbe/base/t4_msg.h | 16 +-
drivers/net/cxgbe/base/t4_pci_id_tbl.h | 15 +-
drivers/net/cxgbe/base/t4_regs.h | 31 +-
drivers/net/cxgbe/base/t4_regs_values.h | 7 +-
drivers/net/cxgbe/base/t4fw_interface.h | 24 +-
drivers/net/cxgbe/cxgbe_ethdev.c | 10 +-
drivers/net/cxgbe/cxgbe_main.c | 96 +--
drivers/net/cxgbe/sge.c | 83 ++-
15 files changed, 1364 insertions(+), 186 deletions(-)
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-30 10:34 ` Ferruh Yigit
2017-05-27 3:46 ` [dpdk-dev] [PATCH 02/13] cxgbe: update register dump Rahul Lakkireddy
` (13 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Add code to detect and run T6 devices. Update PCI ID Device table
with Chelsio T6 device ids and update documentation.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
doc/guides/nics/cxgbe.rst | 41 +++++++++++++++++-------------
doc/guides/rel_notes/release_17_08.rst | 4 +++
drivers/net/cxgbe/base/common.h | 3 ++-
drivers/net/cxgbe/base/t4_chip_type.h | 11 +++++++-
drivers/net/cxgbe/base/t4_hw.c | 46 +++++++++++++++++++++++++++++++---
drivers/net/cxgbe/base/t4_pci_id_tbl.h | 15 ++++++++++-
drivers/net/cxgbe/base/t4_regs.h | 7 +++++-
drivers/net/cxgbe/cxgbe_main.c | 14 +++++++++--
8 files changed, 115 insertions(+), 26 deletions(-)
diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst
index a205b43..176c189 100644
--- a/doc/guides/nics/cxgbe.rst
+++ b/doc/guides/nics/cxgbe.rst
@@ -1,5 +1,5 @@
.. BSD LICENSE
- Copyright 2015 Chelsio Communications.
+ Copyright 2015-2017 Chelsio Communications.
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -32,8 +32,8 @@ CXGBE Poll Mode Driver
======================
The CXGBE PMD (**librte_pmd_cxgbe**) provides poll mode driver support
-for **Chelsio T5** 10/40 Gbps family of adapters. CXGBE PMD has support
-for the latest Linux and FreeBSD operating systems.
+for **Chelsio Terminator** 10/25/40/100 Gbps family of adapters. CXGBE PMD
+has support for the latest Linux and FreeBSD operating systems.
More information can be found at `Chelsio Communications Official Website
<http://www.chelsio.com>`_.
@@ -55,9 +55,10 @@ CXGBE PMD has support for:
Limitations
-----------
-The Chelsio T5 devices provide two/four ports but expose a single PCI bus
-address, thus, librte_pmd_cxgbe registers itself as a
-PCI driver that allocates one Ethernet device per detected port.
+The Chelsio Terminator series of devices provide two/four ports but
+expose a single PCI bus address, thus, librte_pmd_cxgbe registers
+itself as a PCI driver that allocates one Ethernet device per detected
+port.
For this reason, one cannot whitelist/blacklist a single port without
whitelisting/blacklisting the other ports on the same device.
@@ -70,10 +71,16 @@ Supported Chelsio T5 NICs
- 40G NICs: T580-CR, T580-LP-CR, T580-SO-CR
- Other T5 NICs: T522-CR
+Supported Chelsio T6 NICs
+-------------------------
+
+- 25G NICs: T6425-CR, T6225-CR, T6225-LL-CR, T6225-SO-CR
+- 100G NICs: T62100-CR, T62100-LP-CR, T62100-SO-CR
+
Prerequisites
-------------
-- Requires firmware version **1.13.32.0** and higher. Visit
+- Requires firmware version **1.16.43.0** and higher. Visit
`Chelsio Download Center <http://service.chelsio.com>`_ to get latest firmware
bundled with the latest Chelsio Unified Wire package.
@@ -197,12 +204,12 @@ Unified Wire package for Linux operating system are as follows:
.. code-block:: console
- firmware-version: 1.13.32.0, TP 0.1.4.8
+ firmware-version: 1.16.43.0, TP 0.1.4.9
Running testpmd
~~~~~~~~~~~~~~~
-This section demonstrates how to launch **testpmd** with Chelsio T5
+This section demonstrates how to launch **testpmd** with Chelsio
devices managed by librte_pmd_cxgbe in Linux operating system.
#. Load the kernel module:
@@ -226,7 +233,7 @@ devices managed by librte_pmd_cxgbe in Linux operating system.
.. note::
- Both the interfaces of a Chelsio T5 2-port adapter are bound to the
+ Both the interfaces of a Chelsio 2-port adapter are bound to the
same PCI bus address.
#. Unload the kernel module:
@@ -243,7 +250,7 @@ devices managed by librte_pmd_cxgbe in Linux operating system.
.. note::
- Currently, CXGBE PMD only supports the binding of PF4 for Chelsio T5 NICs.
+ Currently, CXGBE PMD only supports the binding of PF4 for Chelsio NICs.
Example output:
@@ -255,7 +262,7 @@ devices managed by librte_pmd_cxgbe in Linux operating system.
EAL: PCI memory mapped at 0x7fd7c0200000
EAL: PCI memory mapped at 0x7fd77cdfd000
EAL: PCI memory mapped at 0x7fd7c10b7000
- PMD: rte_cxgbe_pmd: fw: 1.13.32.0, TP: 0.1.4.8
+ PMD: rte_cxgbe_pmd: fw: 1.16.43.0, TP: 0.1.4.9
PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter
Interactive-mode selected
Configuring Port 0 (socket 0)
@@ -339,12 +346,12 @@ Unified Wire package for FreeBSD operating system are as follows:
.. code-block:: console
- dev.t5nex.0.firmware_version: 1.13.32.0
+ dev.t5nex.0.firmware_version: 1.16.43.0
Running testpmd
~~~~~~~~~~~~~~~
-This section demonstrates how to launch **testpmd** with Chelsio T5
+This section demonstrates how to launch **testpmd** with Chelsio
devices managed by librte_pmd_cxgbe in FreeBSD operating system.
#. Change to DPDK source directory where the target has been compiled in
@@ -413,7 +420,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. note::
- Both the interfaces of a Chelsio T5 2-port adapter are bound to the
+ Both the interfaces of a Chelsio 2-port adapter are bound to the
same PCI bus address.
#. Unload the kernel module:
@@ -433,7 +440,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. note::
- Currently, CXGBE PMD only supports the binding of PF4 for Chelsio T5 NICs.
+ Currently, CXGBE PMD only supports the binding of PF4 for Chelsio NICs.
#. Load nic_uio kernel driver:
@@ -457,7 +464,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
EAL: PCI memory mapped at 0x8007ec000
EAL: PCI memory mapped at 0x842800000
EAL: PCI memory mapped at 0x80086c000
- PMD: rte_cxgbe_pmd: fw: 1.13.32.0, TP: 0.1.4.8
+ PMD: rte_cxgbe_pmd: fw: 1.16.43.0, TP: 0.1.4.9
PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter
Interactive-mode selected
Configuring Port 0 (socket 0)
diff --git a/doc/guides/rel_notes/release_17_08.rst b/doc/guides/rel_notes/release_17_08.rst
index e3a9204..39a3398 100644
--- a/doc/guides/rel_notes/release_17_08.rst
+++ b/doc/guides/rel_notes/release_17_08.rst
@@ -47,6 +47,10 @@ New Features
and inner Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with QUEUE,
MARK, FLAG and VOID actions for ingress traffic.
+* **Added support for Chelsio T6 family of adapters**
+
+ CXGBE PMD updated to run Chelsio T6 family of adapters.
+
Resolved Issues
---------------
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 11f139c..2520c0e 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -385,6 +385,7 @@ void t4_reset_link_config(struct adapter *adap, int idx);
int t4_get_fw_version(struct adapter *adapter, u32 *vers);
int t4_get_tp_version(struct adapter *adapter, u32 *vers);
int t4_get_flash_params(struct adapter *adapter);
+int t4_get_chip_type(struct adapter *adap, int ver);
int t4_prep_adapter(struct adapter *adapter);
int t4_port_init(struct adapter *adap, int mbox, int pf, int vf);
int t4_init_rss_mode(struct adapter *adap, int mbox);
diff --git a/drivers/net/cxgbe/base/t4_chip_type.h b/drivers/net/cxgbe/base/t4_chip_type.h
index 1ca6803..cd7a928 100644
--- a/drivers/net/cxgbe/base/t4_chip_type.h
+++ b/drivers/net/cxgbe/base/t4_chip_type.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -49,6 +49,7 @@
#define CHELSIO_T4 0x4
#define CHELSIO_T5 0x5
+#define CHELSIO_T6 0x6
#define CHELSIO_CHIP_CODE(version, revision) (((version) << 4) | (revision))
#define CHELSIO_CHIP_VERSION(code) (((code) >> 4) & 0xf)
@@ -64,6 +65,10 @@ enum chip_type {
T5_A1 = CHELSIO_CHIP_CODE(CHELSIO_T5, 1),
T5_FIRST_REV = T5_A0,
T5_LAST_REV = T5_A1,
+
+ T6_A0 = CHELSIO_CHIP_CODE(CHELSIO_T6, 0),
+ T6_FIRST_REV = T6_A0,
+ T6_LAST_REV = T6_A0,
};
static inline int is_t4(enum chip_type chip)
@@ -76,4 +81,8 @@ static inline int is_t5(enum chip_type chip)
return (CHELSIO_CHIP_VERSION(chip) == CHELSIO_T5);
}
+static inline int is_t6(enum chip_type chip)
+{
+ return (CHELSIO_CHIP_VERSION(chip) == CHELSIO_T6);
+}
#endif /* __T4_CHIP_TYPE_H__ */
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 9dca8da..e618873 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -2044,7 +2044,9 @@ int t4_flash_cfg_addr(struct adapter *adapter)
void t4_intr_enable(struct adapter *adapter)
{
u32 val = 0;
- u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI));
+ u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
+ u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
+ G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT;
@@ -2069,7 +2071,9 @@ void t4_intr_enable(struct adapter *adapter)
*/
void t4_intr_disable(struct adapter *adapter)
{
- u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI));
+ u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
+ u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
+ G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0);
t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0);
@@ -3370,6 +3374,33 @@ static void set_pcie_completion_timeout(struct adapter *adapter,
}
/**
+ * t4_get_chip_type - Determine chip type from device ID
+ * @adap: the adapter
+ * @ver: adapter version
+ */
+int t4_get_chip_type(struct adapter *adap, int ver)
+{
+ enum chip_type chip = 0;
+ u32 pl_rev = G_REV(t4_read_reg(adap, A_PL_REV));
+
+ /* Retrieve adapter's device ID */
+ switch (ver) {
+ case CHELSIO_T5:
+ chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
+ break;
+ case CHELSIO_T6:
+ chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
+ break;
+ default:
+ dev_err(adap, "Device %d is not supported\n",
+ adap->params.pci.device_id);
+ return -EINVAL;
+ }
+
+ return chip;
+}
+
+/**
* t4_prep_adapter - prepare SW and HW for operation
* @adapter: the adapter
*
@@ -3406,6 +3437,15 @@ int t4_prep_adapter(struct adapter *adapter)
adapter->params.arch.nchan = NCHAN;
adapter->params.arch.vfcount = 128;
break;
+ case CHELSIO_T6:
+ adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
+ adapter->params.arch.sge_fl_db = 0;
+ adapter->params.arch.mps_tcam_size =
+ NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
+ adapter->params.arch.mps_rplc_size = 256;
+ adapter->params.arch.nchan = 2;
+ adapter->params.arch.vfcount = 256;
+ break;
default:
dev_err(adapter, "%s: Device %d is not supported\n",
__func__, adapter->params.pci.device_id);
diff --git a/drivers/net/cxgbe/base/t4_pci_id_tbl.h b/drivers/net/cxgbe/base/t4_pci_id_tbl.h
index 110fadb..1230e73 100644
--- a/drivers/net/cxgbe/base/t4_pci_id_tbl.h
+++ b/drivers/net/cxgbe/base/t4_pci_id_tbl.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -144,6 +144,19 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN
CH_PCI_ID_TABLE_FENTRY(0x5090), /* Custom T540-CR */
CH_PCI_ID_TABLE_FENTRY(0x5091), /* Custom T522-CR */
CH_PCI_ID_TABLE_FENTRY(0x5092), /* Custom T520-CR */
+
+ /* T6 adapter */
+ CH_PCI_ID_TABLE_FENTRY(0x6001), /* T6225-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6002), /* T6225-SO-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6003), /* T6425-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6005), /* T6225-OCP */
+ CH_PCI_ID_TABLE_FENTRY(0x6007), /* T62100-LP-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6008), /* T62100-SO-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x600d), /* T62100-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6011), /* T6225-LL-CR */
+ CH_PCI_ID_TABLE_FENTRY(0x6014), /* T61100-OCP-SO */
+ CH_PCI_ID_TABLE_FENTRY(0x6080), /* Custom T6225-CR SFP28 */
+ CH_PCI_ID_TABLE_FENTRY(0x6081), /* Custom T62100-CR */
CH_PCI_DEVICE_ID_TABLE_DEFINE_END;
#endif /* CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN */
diff --git a/drivers/net/cxgbe/base/t4_regs.h b/drivers/net/cxgbe/base/t4_regs.h
index 9057e40..eb23614 100644
--- a/drivers/net/cxgbe/base/t4_regs.h
+++ b/drivers/net/cxgbe/base/t4_regs.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -763,6 +763,11 @@
#define V_SOURCEPF(x) ((x) << S_SOURCEPF)
#define G_SOURCEPF(x) (((x) >> S_SOURCEPF) & M_SOURCEPF)
+#define S_T6_SOURCEPF 9
+#define M_T6_SOURCEPF 0x7U
+#define V_T6_SOURCEPF(x) ((x) << S_T6_SOURCEPF)
+#define G_T6_SOURCEPF(x) (((x) >> S_T6_SOURCEPF) & M_T6_SOURCEPF)
+
#define A_PL_PF_INT_ENABLE 0x3c4
#define S_PFSW 3
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 1f230cd..3617e28 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -1073,10 +1073,20 @@ void cxgbe_close(struct adapter *adapter)
int cxgbe_probe(struct adapter *adapter)
{
struct port_info *pi;
+ int chip;
int func, i;
int err = 0;
+ u32 whoami;
+
+ whoami = t4_read_reg(adapter, A_PL_WHOAMI);
+ chip = t4_get_chip_type(adapter,
+ CHELSIO_PCI_ID_VER(adapter->pdev->id.device_id));
+ if (chip < 0)
+ return chip;
+
+ func = CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5 ?
+ G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
- func = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI));
adapter->mbox = func;
adapter->pf = func;
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 02/13] cxgbe: update register dump
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 03/13] cxgbe: update flash part information Rahul Lakkireddy
` (12 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Add Chelsio T6 registers to register dump.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/t4_hw.c | 567 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 567 insertions(+)
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index e618873..da28aa0 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -584,6 +584,7 @@ unsigned int t4_get_regs_len(struct adapter *adapter)
switch (chip_version) {
case CHELSIO_T5:
+ case CHELSIO_T6:
return T5_REGMAP_SIZE;
}
@@ -1379,6 +1380,567 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
0x51300, 0x51308,
};
+ static const unsigned int t6_reg_ranges[] = {
+ 0x1008, 0x101c,
+ 0x1024, 0x10a8,
+ 0x10b4, 0x10f8,
+ 0x1100, 0x1114,
+ 0x111c, 0x112c,
+ 0x1138, 0x113c,
+ 0x1144, 0x114c,
+ 0x1180, 0x1184,
+ 0x1190, 0x1194,
+ 0x11a0, 0x11a4,
+ 0x11b0, 0x11b4,
+ 0x11fc, 0x1274,
+ 0x1280, 0x133c,
+ 0x1800, 0x18fc,
+ 0x3000, 0x302c,
+ 0x3060, 0x30b0,
+ 0x30b8, 0x30d8,
+ 0x30e0, 0x30fc,
+ 0x3140, 0x357c,
+ 0x35a8, 0x35cc,
+ 0x35ec, 0x35ec,
+ 0x3600, 0x5624,
+ 0x56cc, 0x56ec,
+ 0x56f4, 0x5720,
+ 0x5728, 0x575c,
+ 0x580c, 0x5814,
+ 0x5890, 0x589c,
+ 0x58a4, 0x58ac,
+ 0x58b8, 0x58bc,
+ 0x5940, 0x595c,
+ 0x5980, 0x598c,
+ 0x59b0, 0x59c8,
+ 0x59d0, 0x59dc,
+ 0x59fc, 0x5a18,
+ 0x5a60, 0x5a6c,
+ 0x5a80, 0x5a8c,
+ 0x5a94, 0x5a9c,
+ 0x5b94, 0x5bfc,
+ 0x5c10, 0x5e48,
+ 0x5e50, 0x5e94,
+ 0x5ea0, 0x5eb0,
+ 0x5ec0, 0x5ec0,
+ 0x5ec8, 0x5ed0,
+ 0x5ee0, 0x5ee0,
+ 0x5ef0, 0x5ef0,
+ 0x5f00, 0x5f00,
+ 0x6000, 0x6020,
+ 0x6028, 0x6040,
+ 0x6058, 0x609c,
+ 0x60a8, 0x619c,
+ 0x7700, 0x7798,
+ 0x77c0, 0x7880,
+ 0x78cc, 0x78fc,
+ 0x7b00, 0x7b58,
+ 0x7b60, 0x7b84,
+ 0x7b8c, 0x7c54,
+ 0x7d00, 0x7d38,
+ 0x7d40, 0x7d84,
+ 0x7d8c, 0x7ddc,
+ 0x7de4, 0x7e04,
+ 0x7e10, 0x7e1c,
+ 0x7e24, 0x7e38,
+ 0x7e40, 0x7e44,
+ 0x7e4c, 0x7e78,
+ 0x7e80, 0x7edc,
+ 0x7ee8, 0x7efc,
+ 0x8dc0, 0x8de4,
+ 0x8df8, 0x8e04,
+ 0x8e10, 0x8e84,
+ 0x8ea0, 0x8f88,
+ 0x8fb8, 0x9058,
+ 0x9060, 0x9060,
+ 0x9068, 0x90f8,
+ 0x9100, 0x9124,
+ 0x9400, 0x9470,
+ 0x9600, 0x9600,
+ 0x9608, 0x9638,
+ 0x9640, 0x9704,
+ 0x9710, 0x971c,
+ 0x9800, 0x9808,
+ 0x9820, 0x983c,
+ 0x9850, 0x9864,
+ 0x9c00, 0x9c6c,
+ 0x9c80, 0x9cec,
+ 0x9d00, 0x9d6c,
+ 0x9d80, 0x9dec,
+ 0x9e00, 0x9e6c,
+ 0x9e80, 0x9eec,
+ 0x9f00, 0x9f6c,
+ 0x9f80, 0xa020,
+ 0xd004, 0xd03c,
+ 0xd100, 0xd118,
+ 0xd200, 0xd214,
+ 0xd220, 0xd234,
+ 0xd240, 0xd254,
+ 0xd260, 0xd274,
+ 0xd280, 0xd294,
+ 0xd2a0, 0xd2b4,
+ 0xd2c0, 0xd2d4,
+ 0xd2e0, 0xd2f4,
+ 0xd300, 0xd31c,
+ 0xdfc0, 0xdfe0,
+ 0xe000, 0xf008,
+ 0xf010, 0xf018,
+ 0xf020, 0xf028,
+ 0x11000, 0x11014,
+ 0x11048, 0x1106c,
+ 0x11074, 0x11088,
+ 0x11098, 0x11120,
+ 0x1112c, 0x1117c,
+ 0x11190, 0x112e0,
+ 0x11300, 0x1130c,
+ 0x12000, 0x1206c,
+ 0x19040, 0x1906c,
+ 0x19078, 0x19080,
+ 0x1908c, 0x190e8,
+ 0x190f0, 0x190f8,
+ 0x19100, 0x19110,
+ 0x19120, 0x19124,
+ 0x19150, 0x19194,
+ 0x1919c, 0x191b0,
+ 0x191d0, 0x191e8,
+ 0x19238, 0x19290,
+ 0x192a4, 0x192b0,
+ 0x192bc, 0x192bc,
+ 0x19348, 0x1934c,
+ 0x193f8, 0x19418,
+ 0x19420, 0x19428,
+ 0x19430, 0x19444,
+ 0x1944c, 0x1946c,
+ 0x19474, 0x19474,
+ 0x19490, 0x194cc,
+ 0x194f0, 0x194f8,
+ 0x19c00, 0x19c48,
+ 0x19c50, 0x19c80,
+ 0x19c94, 0x19c98,
+ 0x19ca0, 0x19cbc,
+ 0x19ce4, 0x19ce4,
+ 0x19cf0, 0x19cf8,
+ 0x19d00, 0x19d28,
+ 0x19d50, 0x19d78,
+ 0x19d94, 0x19d98,
+ 0x19da0, 0x19dc8,
+ 0x19df0, 0x19e10,
+ 0x19e50, 0x19e6c,
+ 0x19ea0, 0x19ebc,
+ 0x19ec4, 0x19ef4,
+ 0x19f04, 0x19f2c,
+ 0x19f34, 0x19f34,
+ 0x19f40, 0x19f50,
+ 0x19f90, 0x19fac,
+ 0x19fc4, 0x19fc8,
+ 0x19fd0, 0x19fe4,
+ 0x1a000, 0x1a004,
+ 0x1a010, 0x1a06c,
+ 0x1a0b0, 0x1a0e4,
+ 0x1a0ec, 0x1a0f8,
+ 0x1a100, 0x1a108,
+ 0x1a114, 0x1a120,
+ 0x1a128, 0x1a130,
+ 0x1a138, 0x1a138,
+ 0x1a190, 0x1a1c4,
+ 0x1a1fc, 0x1a1fc,
+ 0x1e008, 0x1e00c,
+ 0x1e040, 0x1e044,
+ 0x1e04c, 0x1e04c,
+ 0x1e284, 0x1e290,
+ 0x1e2c0, 0x1e2c0,
+ 0x1e2e0, 0x1e2e0,
+ 0x1e300, 0x1e384,
+ 0x1e3c0, 0x1e3c8,
+ 0x1e408, 0x1e40c,
+ 0x1e440, 0x1e444,
+ 0x1e44c, 0x1e44c,
+ 0x1e684, 0x1e690,
+ 0x1e6c0, 0x1e6c0,
+ 0x1e6e0, 0x1e6e0,
+ 0x1e700, 0x1e784,
+ 0x1e7c0, 0x1e7c8,
+ 0x1e808, 0x1e80c,
+ 0x1e840, 0x1e844,
+ 0x1e84c, 0x1e84c,
+ 0x1ea84, 0x1ea90,
+ 0x1eac0, 0x1eac0,
+ 0x1eae0, 0x1eae0,
+ 0x1eb00, 0x1eb84,
+ 0x1ebc0, 0x1ebc8,
+ 0x1ec08, 0x1ec0c,
+ 0x1ec40, 0x1ec44,
+ 0x1ec4c, 0x1ec4c,
+ 0x1ee84, 0x1ee90,
+ 0x1eec0, 0x1eec0,
+ 0x1eee0, 0x1eee0,
+ 0x1ef00, 0x1ef84,
+ 0x1efc0, 0x1efc8,
+ 0x1f008, 0x1f00c,
+ 0x1f040, 0x1f044,
+ 0x1f04c, 0x1f04c,
+ 0x1f284, 0x1f290,
+ 0x1f2c0, 0x1f2c0,
+ 0x1f2e0, 0x1f2e0,
+ 0x1f300, 0x1f384,
+ 0x1f3c0, 0x1f3c8,
+ 0x1f408, 0x1f40c,
+ 0x1f440, 0x1f444,
+ 0x1f44c, 0x1f44c,
+ 0x1f684, 0x1f690,
+ 0x1f6c0, 0x1f6c0,
+ 0x1f6e0, 0x1f6e0,
+ 0x1f700, 0x1f784,
+ 0x1f7c0, 0x1f7c8,
+ 0x1f808, 0x1f80c,
+ 0x1f840, 0x1f844,
+ 0x1f84c, 0x1f84c,
+ 0x1fa84, 0x1fa90,
+ 0x1fac0, 0x1fac0,
+ 0x1fae0, 0x1fae0,
+ 0x1fb00, 0x1fb84,
+ 0x1fbc0, 0x1fbc8,
+ 0x1fc08, 0x1fc0c,
+ 0x1fc40, 0x1fc44,
+ 0x1fc4c, 0x1fc4c,
+ 0x1fe84, 0x1fe90,
+ 0x1fec0, 0x1fec0,
+ 0x1fee0, 0x1fee0,
+ 0x1ff00, 0x1ff84,
+ 0x1ffc0, 0x1ffc8,
+ 0x30000, 0x30030,
+ 0x30100, 0x30168,
+ 0x30190, 0x301a0,
+ 0x301a8, 0x301b8,
+ 0x301c4, 0x301c8,
+ 0x301d0, 0x301d0,
+ 0x30200, 0x30320,
+ 0x30400, 0x304b4,
+ 0x304c0, 0x3052c,
+ 0x30540, 0x3061c,
+ 0x30800, 0x308a0,
+ 0x308c0, 0x30908,
+ 0x30910, 0x309b8,
+ 0x30a00, 0x30a04,
+ 0x30a0c, 0x30a14,
+ 0x30a1c, 0x30a2c,
+ 0x30a44, 0x30a50,
+ 0x30a74, 0x30a74,
+ 0x30a7c, 0x30afc,
+ 0x30b08, 0x30c24,
+ 0x30d00, 0x30d14,
+ 0x30d1c, 0x30d3c,
+ 0x30d44, 0x30d4c,
+ 0x30d54, 0x30d74,
+ 0x30d7c, 0x30d7c,
+ 0x30de0, 0x30de0,
+ 0x30e00, 0x30ed4,
+ 0x30f00, 0x30fa4,
+ 0x30fc0, 0x30fc4,
+ 0x31000, 0x31004,
+ 0x31080, 0x310fc,
+ 0x31208, 0x31220,
+ 0x3123c, 0x31254,
+ 0x31300, 0x31300,
+ 0x31308, 0x3131c,
+ 0x31338, 0x3133c,
+ 0x31380, 0x31380,
+ 0x31388, 0x313a8,
+ 0x313b4, 0x313b4,
+ 0x31400, 0x31420,
+ 0x31438, 0x3143c,
+ 0x31480, 0x31480,
+ 0x314a8, 0x314a8,
+ 0x314b0, 0x314b4,
+ 0x314c8, 0x314d4,
+ 0x31a40, 0x31a4c,
+ 0x31af0, 0x31b20,
+ 0x31b38, 0x31b3c,
+ 0x31b80, 0x31b80,
+ 0x31ba8, 0x31ba8,
+ 0x31bb0, 0x31bb4,
+ 0x31bc8, 0x31bd4,
+ 0x32140, 0x3218c,
+ 0x321f0, 0x321f4,
+ 0x32200, 0x32200,
+ 0x32218, 0x32218,
+ 0x32400, 0x32400,
+ 0x32408, 0x3241c,
+ 0x32618, 0x32620,
+ 0x32664, 0x32664,
+ 0x326a8, 0x326a8,
+ 0x326ec, 0x326ec,
+ 0x32a00, 0x32abc,
+ 0x32b00, 0x32b38,
+ 0x32b20, 0x32b38,
+ 0x32b40, 0x32b58,
+ 0x32b60, 0x32b78,
+ 0x32c00, 0x32c00,
+ 0x32c08, 0x32c3c,
+ 0x33000, 0x3302c,
+ 0x33034, 0x33050,
+ 0x33058, 0x33058,
+ 0x33060, 0x3308c,
+ 0x3309c, 0x330ac,
+ 0x330c0, 0x330c0,
+ 0x330c8, 0x330d0,
+ 0x330d8, 0x330e0,
+ 0x330ec, 0x3312c,
+ 0x33134, 0x33150,
+ 0x33158, 0x33158,
+ 0x33160, 0x3318c,
+ 0x3319c, 0x331ac,
+ 0x331c0, 0x331c0,
+ 0x331c8, 0x331d0,
+ 0x331d8, 0x331e0,
+ 0x331ec, 0x33290,
+ 0x33298, 0x332c4,
+ 0x332e4, 0x33390,
+ 0x33398, 0x333c4,
+ 0x333e4, 0x3342c,
+ 0x33434, 0x33450,
+ 0x33458, 0x33458,
+ 0x33460, 0x3348c,
+ 0x3349c, 0x334ac,
+ 0x334c0, 0x334c0,
+ 0x334c8, 0x334d0,
+ 0x334d8, 0x334e0,
+ 0x334ec, 0x3352c,
+ 0x33534, 0x33550,
+ 0x33558, 0x33558,
+ 0x33560, 0x3358c,
+ 0x3359c, 0x335ac,
+ 0x335c0, 0x335c0,
+ 0x335c8, 0x335d0,
+ 0x335d8, 0x335e0,
+ 0x335ec, 0x33690,
+ 0x33698, 0x336c4,
+ 0x336e4, 0x33790,
+ 0x33798, 0x337c4,
+ 0x337e4, 0x337fc,
+ 0x33814, 0x33814,
+ 0x33854, 0x33868,
+ 0x33880, 0x3388c,
+ 0x338c0, 0x338d0,
+ 0x338e8, 0x338ec,
+ 0x33900, 0x3392c,
+ 0x33934, 0x33950,
+ 0x33958, 0x33958,
+ 0x33960, 0x3398c,
+ 0x3399c, 0x339ac,
+ 0x339c0, 0x339c0,
+ 0x339c8, 0x339d0,
+ 0x339d8, 0x339e0,
+ 0x339ec, 0x33a90,
+ 0x33a98, 0x33ac4,
+ 0x33ae4, 0x33b10,
+ 0x33b24, 0x33b28,
+ 0x33b38, 0x33b50,
+ 0x33bf0, 0x33c10,
+ 0x33c24, 0x33c28,
+ 0x33c38, 0x33c50,
+ 0x33cf0, 0x33cfc,
+ 0x34000, 0x34030,
+ 0x34100, 0x34168,
+ 0x34190, 0x341a0,
+ 0x341a8, 0x341b8,
+ 0x341c4, 0x341c8,
+ 0x341d0, 0x341d0,
+ 0x34200, 0x34320,
+ 0x34400, 0x344b4,
+ 0x344c0, 0x3452c,
+ 0x34540, 0x3461c,
+ 0x34800, 0x348a0,
+ 0x348c0, 0x34908,
+ 0x34910, 0x349b8,
+ 0x34a00, 0x34a04,
+ 0x34a0c, 0x34a14,
+ 0x34a1c, 0x34a2c,
+ 0x34a44, 0x34a50,
+ 0x34a74, 0x34a74,
+ 0x34a7c, 0x34afc,
+ 0x34b08, 0x34c24,
+ 0x34d00, 0x34d14,
+ 0x34d1c, 0x34d3c,
+ 0x34d44, 0x34d4c,
+ 0x34d54, 0x34d74,
+ 0x34d7c, 0x34d7c,
+ 0x34de0, 0x34de0,
+ 0x34e00, 0x34ed4,
+ 0x34f00, 0x34fa4,
+ 0x34fc0, 0x34fc4,
+ 0x35000, 0x35004,
+ 0x35080, 0x350fc,
+ 0x35208, 0x35220,
+ 0x3523c, 0x35254,
+ 0x35300, 0x35300,
+ 0x35308, 0x3531c,
+ 0x35338, 0x3533c,
+ 0x35380, 0x35380,
+ 0x35388, 0x353a8,
+ 0x353b4, 0x353b4,
+ 0x35400, 0x35420,
+ 0x35438, 0x3543c,
+ 0x35480, 0x35480,
+ 0x354a8, 0x354a8,
+ 0x354b0, 0x354b4,
+ 0x354c8, 0x354d4,
+ 0x35a40, 0x35a4c,
+ 0x35af0, 0x35b20,
+ 0x35b38, 0x35b3c,
+ 0x35b80, 0x35b80,
+ 0x35ba8, 0x35ba8,
+ 0x35bb0, 0x35bb4,
+ 0x35bc8, 0x35bd4,
+ 0x36140, 0x3618c,
+ 0x361f0, 0x361f4,
+ 0x36200, 0x36200,
+ 0x36218, 0x36218,
+ 0x36400, 0x36400,
+ 0x36408, 0x3641c,
+ 0x36618, 0x36620,
+ 0x36664, 0x36664,
+ 0x366a8, 0x366a8,
+ 0x366ec, 0x366ec,
+ 0x36a00, 0x36abc,
+ 0x36b00, 0x36b38,
+ 0x36b20, 0x36b38,
+ 0x36b40, 0x36b58,
+ 0x36b60, 0x36b78,
+ 0x36c00, 0x36c00,
+ 0x36c08, 0x36c3c,
+ 0x37000, 0x3702c,
+ 0x37034, 0x37050,
+ 0x37058, 0x37058,
+ 0x37060, 0x3708c,
+ 0x3709c, 0x370ac,
+ 0x370c0, 0x370c0,
+ 0x370c8, 0x370d0,
+ 0x370d8, 0x370e0,
+ 0x370ec, 0x3712c,
+ 0x37134, 0x37150,
+ 0x37158, 0x37158,
+ 0x37160, 0x3718c,
+ 0x3719c, 0x371ac,
+ 0x371c0, 0x371c0,
+ 0x371c8, 0x371d0,
+ 0x371d8, 0x371e0,
+ 0x371ec, 0x37290,
+ 0x37298, 0x372c4,
+ 0x372e4, 0x37390,
+ 0x37398, 0x373c4,
+ 0x373e4, 0x3742c,
+ 0x37434, 0x37450,
+ 0x37458, 0x37458,
+ 0x37460, 0x3748c,
+ 0x3749c, 0x374ac,
+ 0x374c0, 0x374c0,
+ 0x374c8, 0x374d0,
+ 0x374d8, 0x374e0,
+ 0x374ec, 0x3752c,
+ 0x37534, 0x37550,
+ 0x37558, 0x37558,
+ 0x37560, 0x3758c,
+ 0x3759c, 0x375ac,
+ 0x375c0, 0x375c0,
+ 0x375c8, 0x375d0,
+ 0x375d8, 0x375e0,
+ 0x375ec, 0x37690,
+ 0x37698, 0x376c4,
+ 0x376e4, 0x37790,
+ 0x37798, 0x377c4,
+ 0x377e4, 0x377fc,
+ 0x37814, 0x37814,
+ 0x37854, 0x37868,
+ 0x37880, 0x3788c,
+ 0x378c0, 0x378d0,
+ 0x378e8, 0x378ec,
+ 0x37900, 0x3792c,
+ 0x37934, 0x37950,
+ 0x37958, 0x37958,
+ 0x37960, 0x3798c,
+ 0x3799c, 0x379ac,
+ 0x379c0, 0x379c0,
+ 0x379c8, 0x379d0,
+ 0x379d8, 0x379e0,
+ 0x379ec, 0x37a90,
+ 0x37a98, 0x37ac4,
+ 0x37ae4, 0x37b10,
+ 0x37b24, 0x37b28,
+ 0x37b38, 0x37b50,
+ 0x37bf0, 0x37c10,
+ 0x37c24, 0x37c28,
+ 0x37c38, 0x37c50,
+ 0x37cf0, 0x37cfc,
+ 0x40040, 0x40040,
+ 0x40080, 0x40084,
+ 0x40100, 0x40100,
+ 0x40140, 0x401bc,
+ 0x40200, 0x40214,
+ 0x40228, 0x40228,
+ 0x40240, 0x40258,
+ 0x40280, 0x40280,
+ 0x40304, 0x40304,
+ 0x40330, 0x4033c,
+ 0x41304, 0x413c8,
+ 0x413d0, 0x413dc,
+ 0x413f0, 0x413f0,
+ 0x41400, 0x4140c,
+ 0x41414, 0x4141c,
+ 0x41480, 0x414d0,
+ 0x44000, 0x4407c,
+ 0x440c0, 0x441ac,
+ 0x441b4, 0x4427c,
+ 0x442c0, 0x443ac,
+ 0x443b4, 0x4447c,
+ 0x444c0, 0x445ac,
+ 0x445b4, 0x4467c,
+ 0x446c0, 0x447ac,
+ 0x447b4, 0x4487c,
+ 0x448c0, 0x449ac,
+ 0x449b4, 0x44a7c,
+ 0x44ac0, 0x44bac,
+ 0x44bb4, 0x44c7c,
+ 0x44cc0, 0x44dac,
+ 0x44db4, 0x44e7c,
+ 0x44ec0, 0x44fac,
+ 0x44fb4, 0x4507c,
+ 0x450c0, 0x451ac,
+ 0x451b4, 0x451fc,
+ 0x45800, 0x45804,
+ 0x45810, 0x45830,
+ 0x45840, 0x45860,
+ 0x45868, 0x45868,
+ 0x45880, 0x45884,
+ 0x458a0, 0x458b0,
+ 0x45a00, 0x45a04,
+ 0x45a10, 0x45a30,
+ 0x45a40, 0x45a60,
+ 0x45a68, 0x45a68,
+ 0x45a80, 0x45a84,
+ 0x45aa0, 0x45ab0,
+ 0x460c0, 0x460e4,
+ 0x47000, 0x4703c,
+ 0x47044, 0x4708c,
+ 0x47200, 0x47250,
+ 0x47400, 0x47408,
+ 0x47414, 0x47420,
+ 0x47600, 0x47618,
+ 0x47800, 0x47814,
+ 0x47820, 0x4782c,
+ 0x50000, 0x50084,
+ 0x50090, 0x500cc,
+ 0x50300, 0x50384,
+ 0x50400, 0x50400,
+ 0x50800, 0x50884,
+ 0x50890, 0x508cc,
+ 0x50b00, 0x50b84,
+ 0x50c00, 0x50c00,
+ 0x51000, 0x51020,
+ 0x51028, 0x510b0,
+ 0x51300, 0x51324,
+ };
+
u32 *buf_end = (u32 *)((char *)buf + buf_size);
const unsigned int *reg_ranges;
int reg_ranges_size, range;
@@ -1393,6 +1955,11 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
break;
+ case CHELSIO_T6:
+ reg_ranges = t6_reg_ranges;
+ reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
+ break;
+
default:
dev_err(adap,
"Unsupported chip version %d\n", chip_version);
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 03/13] cxgbe: update flash part information
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 02/13] cxgbe: update register dump Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 04/13] cxgbe: grab available ports after firmware reset Rahul Lakkireddy
` (11 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Update flash part identification and decoding to accommodate new
flash parts.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/t4_hw.c | 106 +++++++++++++++++++++++++++++++----------
1 file changed, 81 insertions(+), 25 deletions(-)
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index da28aa0..4ab12ac 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -3863,8 +3863,12 @@ static int t4_wait_dev_ready(struct adapter *adapter)
msleep(500);
whoami = t4_read_reg(adapter, A_PL_WHOAMI);
- return (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS
- ? 0 : -EIO);
+ if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
+ return 0;
+
+ dev_err(adapter, "Device didn't become ready for access, whoami = %#x\n",
+ whoami);
+ return -EIO;
}
struct flash_desc {
@@ -3880,47 +3884,96 @@ int t4_get_flash_params(struct adapter *adapter)
* sectors.
*/
static struct flash_desc supported_flash[] = {
- { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
+ { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
};
int ret;
- unsigned int i;
- u32 info = 0;
-
+ u32 flashid = 0;
+ unsigned int part, manufacturer;
+ unsigned int density, size;
+
+ /**
+ * Issue a Read ID Command to the Flash part. We decode supported
+ * Flash parts and their sizes from this. There's a newer Query
+ * Command which can retrieve detailed geometry information but
+ * many Flash parts don't support it.
+ */
ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID);
if (!ret)
- ret = sf1_read(adapter, 3, 0, 1, &info);
+ ret = sf1_read(adapter, 3, 0, 1, &flashid);
t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */
if (ret < 0)
return ret;
- for (i = 0; i < ARRAY_SIZE(supported_flash); ++i)
- if (supported_flash[i].vendor_and_model_id == info) {
- adapter->params.sf_size = supported_flash[i].size_mb;
+ for (part = 0; part < ARRAY_SIZE(supported_flash); part++) {
+ if (supported_flash[part].vendor_and_model_id == flashid) {
+ adapter->params.sf_size =
+ supported_flash[part].size_mb;
adapter->params.sf_nsec =
adapter->params.sf_size / SF_SEC_SIZE;
- return 0;
+ goto found;
}
+ }
- if ((info & 0xff) != 0x20) /* not a Numonix flash */
- return -EINVAL;
- info >>= 16; /* log2 of size */
- if (info >= 0x14 && info < 0x18)
- adapter->params.sf_nsec = 1 << (info - 16);
- else if (info == 0x18)
- adapter->params.sf_nsec = 64;
- else
+ manufacturer = flashid & 0xff;
+ switch (manufacturer) {
+ case 0x20: { /* Micron/Numonix */
+ /**
+ * This Density -> Size decoding table is taken from Micron
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x14:
+ size = 1 << 20; /* 1MB */
+ break;
+ case 0x15:
+ size = 1 << 21; /* 2MB */
+ break;
+ case 0x16:
+ size = 1 << 22; /* 4MB */
+ break;
+ case 0x17:
+ size = 1 << 23; /* 8MB */
+ break;
+ case 0x18:
+ size = 1 << 24; /* 16MB */
+ break;
+ case 0x19:
+ size = 1 << 25; /* 32MB */
+ break;
+ case 0x20:
+ size = 1 << 26; /* 64MB */
+ break;
+ case 0x21:
+ size = 1 << 27; /* 128MB */
+ break;
+ case 0x22:
+ size = 1 << 28; /* 256MB */
+ break;
+ default:
+ dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n",
+ flashid, density);
+ return -EINVAL;
+ }
+
+ adapter->params.sf_size = size;
+ adapter->params.sf_nsec = size / SF_SEC_SIZE;
+ break;
+ }
+ default:
+ dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid);
return -EINVAL;
- adapter->params.sf_size = 1 << info;
+ }
+found:
/*
* We should reject adapters with FLASHes which are too small. So, emit
* a warning.
*/
- if (adapter->params.sf_size < FLASH_MIN_SIZE) {
- dev_warn(adapter, "WARNING!!! FLASH size %#x < %#x!!!\n",
- adapter->params.sf_size, FLASH_MIN_SIZE);
- }
+ if (adapter->params.sf_size < FLASH_MIN_SIZE)
+ dev_warn(adapter, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
+ flashid, adapter->params.sf_size, FLASH_MIN_SIZE);
return 0;
}
@@ -4023,8 +4076,11 @@ int t4_prep_adapter(struct adapter *adapter)
t4_os_find_pci_capability(adapter, PCI_CAP_ID_VPD);
ret = t4_get_flash_params(adapter);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(adapter, "Unable to retrieve Flash Parameters, ret = %d\n",
+ -ret);
return ret;
+ }
adapter->params.cim_la_size = CIMLA_SIZE;
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 04/13] cxgbe: grab available ports after firmware reset
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (2 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 03/13] cxgbe: update flash part information Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules Rahul Lakkireddy
` (10 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Move code to get the available ports from the firmware after it had
been reset. This ensures that driver uses the latest info on available
ports after firmware reset.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/cxgbe_main.c | 36 ++++++++++++++++--------------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 3617e28..21e731f 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -662,26 +662,6 @@ static int adap_init0(struct adapter *adap)
}
/*
- * Find out what ports are available to us. Note that we need to do
- * this before calling adap_init0_no_config() since it needs nports
- * and portvec ...
- */
- v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
- V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC);
- ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec);
- if (ret < 0) {
- dev_err(adap, "%s: failure in t4_queury_params; error = %d\n",
- __func__, ret);
- goto bye;
- }
-
- adap->params.nports = hweight32(port_vec);
- adap->params.portvec = port_vec;
-
- dev_debug(adap, "%s: adap->params.nports = %u\n", __func__,
- adap->params.nports);
-
- /*
* If the firmware is initialized already (and we're not forcing a
* master initialization), note that we're living with existing
* adapter parameters. Otherwise, it's time to try initializing the
@@ -705,6 +685,22 @@ static int adap_init0(struct adapter *adap)
goto bye;
}
+ /* Find out what ports are available to us. */
+ v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+ V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC);
+ ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec);
+ if (ret < 0) {
+ dev_err(adap, "%s: failure in t4_query_params; error = %d\n",
+ __func__, ret);
+ goto bye;
+ }
+
+ adap->params.nports = hweight32(port_vec);
+ adap->params.portvec = port_vec;
+
+ dev_debug(adap, "%s: adap->params.nports = %u\n", __func__,
+ adap->params.nports);
+
/*
* Give the SGE code a chance to pull in anything that it needs ...
* Note that this must be called after we retrieve our VPD parameters
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (3 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 04/13] cxgbe: grab available ports after firmware reset Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-30 10:37 ` Ferruh Yigit
2017-05-27 3:46 ` [dpdk-dev] [PATCH 06/13] cxgbe: add forward error correction support Rahul Lakkireddy
` (9 subsequent siblings)
14 siblings, 1 reply; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Add 25G and 100G link speeds and update supported port modules.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/common.h | 4 ++--
drivers/net/cxgbe/base/t4_hw.c | 17 +++++++++++++----
drivers/net/cxgbe/base/t4fw_interface.h | 18 ++++++++++++++++--
drivers/net/cxgbe/cxgbe_main.c | 21 ++++++++++++++-------
4 files changed, 45 insertions(+), 15 deletions(-)
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 2520c0e..73ec057 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -231,8 +231,8 @@ struct adapter_params {
struct link_config {
unsigned short supported; /* link capabilities */
unsigned short advertising; /* advertised capabilities */
- unsigned short requested_speed; /* speed user has requested */
- unsigned short speed; /* actual link speed */
+ unsigned int requested_speed; /* speed user has requested */
+ unsigned int speed; /* actual link speed */
unsigned char requested_fc; /* flow control user has requested */
unsigned char fc; /* actual link flow control */
unsigned char autoneg; /* autonegotiating? */
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 4ab12ac..05bf1e8 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -2522,9 +2522,8 @@ int t4_get_tp_version(struct adapter *adapter, u32 *vers)
1, vers, 0);
}
-#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
- FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
- FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG)
+#define ADVERT_MASK (V_FW_PORT_CAP_SPEED(M_FW_PORT_CAP_SPEED) | \
+ FW_PORT_CAP_ANEG)
/**
* t4_link_l1cfg - apply link configuration to MAC/PHY
@@ -2669,6 +2668,12 @@ const char *t4_get_port_type_description(enum fw_port_type port_type)
"QSA",
"QSFP",
"BP40_BA",
+ "KR4_100G",
+ "CR4_QSFP",
+ "CR_QSFP",
+ "CR2_QSFP",
+ "SFP28",
+ "KR_SFP28",
};
if (port_type < ARRAY_SIZE(port_type_description))
@@ -3745,7 +3750,7 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) {
/* link/module state change message */
- int speed = 0, fc = 0, i;
+ unsigned int speed = 0, fc = 0, i;
int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
struct port_info *pi = NULL;
struct link_config *lc;
@@ -3763,8 +3768,12 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
speed = ETH_SPEED_NUM_1G;
else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
speed = ETH_SPEED_NUM_10G;
+ else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G))
+ speed = ETH_SPEED_NUM_25G;
else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
speed = ETH_SPEED_NUM_40G;
+ else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G))
+ speed = ETH_SPEED_NUM_100G;
for_each_port(adap, i) {
pi = adap2pinfo(adap, i);
diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h
index 74f19fe..43e8c0a 100644
--- a/drivers/net/cxgbe/base/t4fw_interface.h
+++ b/drivers/net/cxgbe/base/t4fw_interface.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -1061,7 +1061,7 @@ struct fw_vi_stats_cmd {
enum fw_port_cap {
FW_PORT_CAP_SPEED_100M = 0x0001,
FW_PORT_CAP_SPEED_1G = 0x0002,
- FW_PORT_CAP_SPEED_2_5G = 0x0004,
+ FW_PORT_CAP_SPEED_25G = 0x0004,
FW_PORT_CAP_SPEED_10G = 0x0008,
FW_PORT_CAP_SPEED_40G = 0x0010,
FW_PORT_CAP_SPEED_100G = 0x0020,
@@ -1077,6 +1077,12 @@ enum fw_port_cap {
FW_PORT_CAP_802_3_ASM_DIR = 0x8000,
};
+#define S_FW_PORT_CAP_SPEED 0
+#define M_FW_PORT_CAP_SPEED 0x3f
+#define V_FW_PORT_CAP_SPEED(x) ((x) << S_FW_PORT_CAP_SPEED)
+#define G_FW_PORT_CAP_SPEED(x) \
+ (((x) >> S_FW_PORT_CAP_SPEED) & M_FW_PORT_CAP_SPEED)
+
enum fw_port_mdi {
FW_PORT_CAP_MDI_AUTO,
};
@@ -1279,6 +1285,14 @@ enum fw_port_type {
FW_PORT_TYPE_QSFP = 14, /* No, 4, Yes, No, No, No, 40G */
FW_PORT_TYPE_BP40_BA = 15,
/* No, 4, No, No, Yes, Yes, 40G/10G/1G, BP ANGE */
+ FW_PORT_TYPE_KR4_100G = 16, /* No, 4, 100G*/
+ FW_PORT_TYPE_CR4_QSFP = 17, /* No, 4, 100G*/
+ FW_PORT_TYPE_CR4_CFP4 = 18, /* No, 4, 100G*/
+ FW_PORT_TYPE_CR_QSFP = 19, /* No, 1, 25G*/
+ FW_PORT_TYPE_CR_CFP4 = 20, /* No, 1, 25G*/
+ FW_PORT_TYPE_CR2_QSFP = 21, /* No, 2, 50G*/
+ FW_PORT_TYPE_CR2_CFP4 = 22, /* No, 2, 50G*/
+ FW_PORT_TYPE_SFP28 = 23, /* No, 1, 25G*/
FW_PORT_TYPE_NONE = M_FW_PORT_CMD_PTYPE
};
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 21e731f..4691505 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -206,9 +206,12 @@ static inline bool is_x_1g_port(const struct link_config *lc)
static inline bool is_x_10g_port(const struct link_config *lc)
{
- return ((lc->supported & FW_PORT_CAP_SPEED_10G) != 0 ||
- (lc->supported & FW_PORT_CAP_SPEED_40G) != 0 ||
- (lc->supported & FW_PORT_CAP_SPEED_100G) != 0);
+ unsigned int speeds, high_speeds;
+
+ speeds = V_FW_PORT_CAP_SPEED(G_FW_PORT_CAP_SPEED(lc->supported));
+ high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G);
+
+ return high_speeds != 0;
}
inline void init_rspq(struct adapter *adap, struct sge_rspq *q,
@@ -374,13 +377,17 @@ static void print_port_info(struct adapter *adap)
char *bufp = buf;
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
- bufp += sprintf(bufp, "100/");
+ bufp += sprintf(bufp, "100M/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
- bufp += sprintf(bufp, "1000/");
+ bufp += sprintf(bufp, "1G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
bufp += sprintf(bufp, "10G/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G)
+ bufp += sprintf(bufp, "25G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
bufp += sprintf(bufp, "40G/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G)
+ bufp += sprintf(bufp, "100G/");
if (bufp != buf)
--bufp;
sprintf(bufp, "BASE-%s",
@@ -829,10 +836,10 @@ void t4_os_portmod_changed(const struct adapter *adap, int port_id)
dev_info(adap, "Port%d: %s port module inserted\n", pi->port_id,
mod_str[pi->mod_type]);
else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
- dev_info(adap, "Port%d: unsupported optical port module inserted\n",
+ dev_info(adap, "Port%d: unsupported port module inserted\n",
pi->port_id);
else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
- dev_info(adap, "Port%d: unknown port module inserted, forcing TWINAX\n",
+ dev_info(adap, "Port%d: unknown port module inserted\n",
pi->port_id);
else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
dev_info(adap, "Port%d: transceiver module error\n",
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 06/13] cxgbe: add forward error correction support
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (4 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 07/13] cxgbe: update hardware info prints Rahul Lakkireddy
` (8 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Add forward error correction (FEC) support and update link
configuration.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/common.h | 8 +++++
drivers/net/cxgbe/base/t4_hw.c | 57 ++++++++++++++++++++++++++-------
drivers/net/cxgbe/base/t4fw_interface.h | 6 ++--
3 files changed, 56 insertions(+), 15 deletions(-)
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 73ec057..5db4ca8 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -68,6 +68,12 @@ enum {
PAUSE_AUTONEG = 1 << 2
};
+enum {
+ FEC_RS = 1 << 0,
+ FEC_BASER_RS = 1 << 1,
+ FEC_RESERVED = 1 << 2,
+};
+
struct port_stats {
u64 tx_octets; /* total # of octets in good frames */
u64 tx_frames; /* all good frames */
@@ -235,6 +241,8 @@ struct link_config {
unsigned int speed; /* actual link speed */
unsigned char requested_fc; /* flow control user has requested */
unsigned char fc; /* actual link flow control */
+ unsigned char requested_fec; /* Forward Error Correction user */
+ unsigned char fec; /* has requested and actual FEC */
unsigned char autoneg; /* autonegotiating? */
unsigned char link_ok; /* link up? */
};
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 05bf1e8..053a2cd 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -57,7 +57,8 @@
#include "t4_regs_values.h"
#include "t4fw_interface.h"
-static void init_link_config(struct link_config *lc, unsigned int caps);
+static void init_link_config(struct link_config *lc, unsigned int pcaps,
+ unsigned int acaps);
/**
* t4_read_mtu_tbl - returns the values in the HW path MTU table
@@ -2542,14 +2543,24 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
struct link_config *lc)
{
struct fw_port_cmd c;
- unsigned int fc = 0, mdi = V_FW_PORT_CAP_MDI(FW_PORT_CAP_MDI_AUTO);
+ unsigned int mdi = V_FW_PORT_CAP_MDI(FW_PORT_CAP_MDI_AUTO);
+ unsigned int fc, fec;
lc->link_ok = 0;
+ fc = 0;
if (lc->requested_fc & PAUSE_RX)
fc |= FW_PORT_CAP_FC_RX;
if (lc->requested_fc & PAUSE_TX)
fc |= FW_PORT_CAP_FC_TX;
+ fec = 0;
+ if (lc->requested_fec & FEC_RS)
+ fec |= FW_PORT_CAP_FEC_RS;
+ if (lc->requested_fec & FEC_BASER_RS)
+ fec |= FW_PORT_CAP_FEC_BASER_RS;
+ if (lc->requested_fec & FEC_RESERVED)
+ fec |= FW_PORT_CAP_FEC_RESERVED;
+
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
@@ -2560,13 +2571,16 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
if (!(lc->supported & FW_PORT_CAP_ANEG)) {
c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) |
- fc);
- lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ fc | fec);
+ lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
+ lc->fec = lc->requested_fec;
} else if (lc->autoneg == AUTONEG_DISABLE) {
- c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi);
- lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc |
+ fec | mdi);
+ lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
+ lc->fec = lc->requested_fec;
} else {
- c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi);
+ c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | fec | mdi);
}
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
@@ -3831,19 +3845,37 @@ void t4_reset_link_config(struct adapter *adap, int idx)
/**
* init_link_config - initialize a link's SW state
* @lc: structure holding the link state
- * @caps: link capabilities
+ * @pcaps: link Port Capabilities
+ * @acaps: link current Advertised Port Capabilities
*
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
-static void init_link_config(struct link_config *lc,
- unsigned int caps)
+static void init_link_config(struct link_config *lc, unsigned int pcaps,
+ unsigned int acaps)
{
- lc->supported = caps;
+ unsigned int fec;
+
+ lc->supported = pcaps;
lc->requested_speed = 0;
lc->speed = 0;
lc->requested_fc = 0;
lc->fc = 0;
+
+ /**
+ * For Forward Error Control, we default to whatever the Firmware
+ * tells us the Link is currently advertising.
+ */
+ fec = 0;
+ if (acaps & FW_PORT_CAP_FEC_RS)
+ fec |= FEC_RS;
+ if (acaps & FW_PORT_CAP_FEC_BASER_RS)
+ fec |= FEC_BASER_RS;
+ if (acaps & FW_PORT_CAP_FEC_RESERVED)
+ fec |= FEC_RESERVED;
+ lc->requested_fec = fec;
+ lc->fec = fec;
+
if (lc->supported & FW_PORT_CAP_ANEG) {
lc->advertising = lc->supported & ADVERT_MASK;
lc->autoneg = AUTONEG_ENABLE;
@@ -4399,7 +4431,8 @@ int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
p->port_type = G_FW_PORT_CMD_PTYPE(ret);
p->mod_type = FW_PORT_MOD_TYPE_NA;
- init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap));
+ init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap),
+ be16_to_cpu(c.u.info.acap));
j++;
}
return 0;
diff --git a/drivers/net/cxgbe/base/t4fw_interface.h b/drivers/net/cxgbe/base/t4fw_interface.h
index 43e8c0a..fcc61bf 100644
--- a/drivers/net/cxgbe/base/t4fw_interface.h
+++ b/drivers/net/cxgbe/base/t4fw_interface.h
@@ -1070,9 +1070,9 @@ enum fw_port_cap {
FW_PORT_CAP_ANEG = 0x0100,
FW_PORT_CAP_MDIX = 0x0200,
FW_PORT_CAP_MDIAUTO = 0x0400,
- FW_PORT_CAP_FEC = 0x0800,
- FW_PORT_CAP_TECHKR = 0x1000,
- FW_PORT_CAP_TECHKX4 = 0x2000,
+ FW_PORT_CAP_FEC_RS = 0x0800,
+ FW_PORT_CAP_FEC_BASER_RS = 0x1000,
+ FW_PORT_CAP_FEC_RESERVED = 0x2000,
FW_PORT_CAP_802_3_PAUSE = 0x4000,
FW_PORT_CAP_802_3_ASM_DIR = 0x8000,
};
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 07/13] cxgbe: update hardware info prints
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (5 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 06/13] cxgbe: add forward error correction support Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 08/13] cxgbe: update TX path for Chelsio T6 Rahul Lakkireddy
` (7 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Update informational prints pertaining to underlying hardware.
Add bootstrap firmware version and expansion ROM version prints.
Move the prints to a single function.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/common.h | 6 +-
drivers/net/cxgbe/base/t4_hw.c | 150 +++++++++++++++++++++++++++++++++++++++-
drivers/net/cxgbe/base/t4_hw.h | 18 ++++-
drivers/net/cxgbe/cxgbe_main.c | 25 +++----
4 files changed, 182 insertions(+), 17 deletions(-)
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 5db4ca8..dd8da0a 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -216,7 +216,9 @@ struct adapter_params {
unsigned int sf_nsec; /* # of flash sectors */
unsigned int fw_vers;
+ unsigned int bs_vers;
unsigned int tp_vers;
+ unsigned int er_vers;
unsigned short mtus[NMTUS];
unsigned short a_wnd[NCCTRL_WIN];
@@ -390,8 +392,8 @@ void t4_get_port_stats_offset(struct adapter *adap, int idx,
struct port_stats *offset);
void t4_clr_port_stats(struct adapter *adap, int idx);
void t4_reset_link_config(struct adapter *adap, int idx);
-int t4_get_fw_version(struct adapter *adapter, u32 *vers);
-int t4_get_tp_version(struct adapter *adapter, u32 *vers);
+int t4_get_version_info(struct adapter *adapter);
+void t4_dump_version_info(struct adapter *adapter);
int t4_get_flash_params(struct adapter *adapter);
int t4_get_chip_type(struct adapter *adap, int ver);
int t4_prep_adapter(struct adapter *adapter);
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 053a2cd..787494b 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -2497,32 +2497,178 @@ int t4_read_flash(struct adapter *adapter, unsigned int addr,
}
/**
+ * t4_get_exprom_version - return the Expansion ROM version (if any)
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the Expansion ROM header from FLASH and returns the version
+ * number (if present) through the @vers return value pointer. We return
+ * this in the Firmware Version Format since it's convenient. Return
+ * 0 on success, -ENOENT if no Expansion ROM is present.
+ */
+static int t4_get_exprom_version(struct adapter *adapter, u32 *vers)
+{
+ struct exprom_header {
+ unsigned char hdr_arr[16]; /* must start with 0x55aa */
+ unsigned char hdr_ver[4]; /* Expansion ROM version */
+ } *hdr;
+ u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
+ sizeof(u32))];
+ int ret;
+
+ ret = t4_read_flash(adapter, FLASH_EXP_ROM_START,
+ ARRAY_SIZE(exprom_header_buf),
+ exprom_header_buf, 0);
+ if (ret)
+ return ret;
+
+ hdr = (struct exprom_header *)exprom_header_buf;
+ if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
+ return -ENOENT;
+
+ *vers = (V_FW_HDR_FW_VER_MAJOR(hdr->hdr_ver[0]) |
+ V_FW_HDR_FW_VER_MINOR(hdr->hdr_ver[1]) |
+ V_FW_HDR_FW_VER_MICRO(hdr->hdr_ver[2]) |
+ V_FW_HDR_FW_VER_BUILD(hdr->hdr_ver[3]));
+ return 0;
+}
+
+/**
* t4_get_fw_version - read the firmware version
* @adapter: the adapter
* @vers: where to place the version
*
* Reads the FW version from flash.
*/
-int t4_get_fw_version(struct adapter *adapter, u32 *vers)
+static int t4_get_fw_version(struct adapter *adapter, u32 *vers)
{
return t4_read_flash(adapter, FLASH_FW_START +
offsetof(struct fw_hdr, fw_ver), 1, vers, 0);
}
/**
+ * t4_get_bs_version - read the firmware bootstrap version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the FW Bootstrap version from flash.
+ */
+static int t4_get_bs_version(struct adapter *adapter, u32 *vers)
+{
+ return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
+ offsetof(struct fw_hdr, fw_ver), 1,
+ vers, 0);
+}
+
+/**
* t4_get_tp_version - read the TP microcode version
* @adapter: the adapter
* @vers: where to place the version
*
* Reads the TP microcode version from flash.
*/
-int t4_get_tp_version(struct adapter *adapter, u32 *vers)
+static int t4_get_tp_version(struct adapter *adapter, u32 *vers)
{
return t4_read_flash(adapter, FLASH_FW_START +
offsetof(struct fw_hdr, tp_microcode_ver),
1, vers, 0);
}
+/**
+ * t4_get_version_info - extract various chip/firmware version information
+ * @adapter: the adapter
+ *
+ * Reads various chip/firmware version numbers and stores them into the
+ * adapter Adapter Parameters structure. If any of the efforts fails
+ * the first failure will be returned, but all of the version numbers
+ * will be read.
+ */
+int t4_get_version_info(struct adapter *adapter)
+{
+ int ret = 0;
+
+#define FIRST_RET(__getvinfo) \
+ do { \
+ int __ret = __getvinfo; \
+ if (__ret && !ret) \
+ ret = __ret; \
+ } while (0)
+
+ FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
+ FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
+ FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
+ FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
+
+#undef FIRST_RET
+
+ return ret;
+}
+
+/**
+ * t4_dump_version_info - dump all of the adapter configuration IDs
+ * @adapter: the adapter
+ *
+ * Dumps all of the various bits of adapter configuration version/revision
+ * IDs information. This is typically called at some point after
+ * t4_get_version_info() has been called.
+ */
+void t4_dump_version_info(struct adapter *adapter)
+{
+ /**
+ * Device information.
+ */
+ dev_info(adapter, "Chelsio rev %d\n",
+ CHELSIO_CHIP_RELEASE(adapter->params.chip));
+
+ /**
+ * Firmware Version.
+ */
+ if (!adapter->params.fw_vers)
+ dev_warn(adapter, "No firmware loaded\n");
+ else
+ dev_info(adapter, "Firmware version: %u.%u.%u.%u\n",
+ G_FW_HDR_FW_VER_MAJOR(adapter->params.fw_vers),
+ G_FW_HDR_FW_VER_MINOR(adapter->params.fw_vers),
+ G_FW_HDR_FW_VER_MICRO(adapter->params.fw_vers),
+ G_FW_HDR_FW_VER_BUILD(adapter->params.fw_vers));
+
+ /**
+ * Bootstrap Firmware Version.
+ */
+ if (!adapter->params.bs_vers)
+ dev_warn(adapter, "No bootstrap loaded\n");
+ else
+ dev_info(adapter, "Bootstrap version: %u.%u.%u.%u\n",
+ G_FW_HDR_FW_VER_MAJOR(adapter->params.bs_vers),
+ G_FW_HDR_FW_VER_MINOR(adapter->params.bs_vers),
+ G_FW_HDR_FW_VER_MICRO(adapter->params.bs_vers),
+ G_FW_HDR_FW_VER_BUILD(adapter->params.bs_vers));
+
+ /**
+ * TP Microcode Version.
+ */
+ if (!adapter->params.tp_vers)
+ dev_warn(adapter, "No TP Microcode loaded\n");
+ else
+ dev_info(adapter, "TP Microcode version: %u.%u.%u.%u\n",
+ G_FW_HDR_FW_VER_MAJOR(adapter->params.tp_vers),
+ G_FW_HDR_FW_VER_MINOR(adapter->params.tp_vers),
+ G_FW_HDR_FW_VER_MICRO(adapter->params.tp_vers),
+ G_FW_HDR_FW_VER_BUILD(adapter->params.tp_vers));
+
+ /**
+ * Expansion ROM version.
+ */
+ if (!adapter->params.er_vers)
+ dev_info(adapter, "No Expansion ROM loaded\n");
+ else
+ dev_info(adapter, "Expansion ROM version: %u.%u.%u.%u\n",
+ G_FW_HDR_FW_VER_MAJOR(adapter->params.er_vers),
+ G_FW_HDR_FW_VER_MINOR(adapter->params.er_vers),
+ G_FW_HDR_FW_VER_MICRO(adapter->params.er_vers),
+ G_FW_HDR_FW_VER_BUILD(adapter->params.er_vers));
+}
+
#define ADVERT_MASK (V_FW_PORT_CAP_SPEED(M_FW_PORT_CAP_SPEED) | \
FW_PORT_CAP_ANEG)
diff --git a/drivers/net/cxgbe/base/t4_hw.h b/drivers/net/cxgbe/base/t4_hw.h
index 5e62c41..0749884 100644
--- a/drivers/net/cxgbe/base/t4_hw.h
+++ b/drivers/net/cxgbe/base/t4_hw.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -124,6 +124,14 @@ struct rsp_ctrl {
enum {
/*
+ * Various Expansion-ROM boot images, etc.
+ */
+ FLASH_EXP_ROM_START_SEC = 0,
+ FLASH_EXP_ROM_NSECS = 6,
+ FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC),
+ FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS),
+
+ /*
* Location of firmware image in FLASH.
*/
FLASH_FW_START_SEC = 8,
@@ -132,6 +140,14 @@ enum {
FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS),
/*
+ * Location of bootstrap firmware image in FLASH.
+ */
+ FLASH_FWBOOTSTRAP_START_SEC = 27,
+ FLASH_FWBOOTSTRAP_NSECS = 1,
+ FLASH_FWBOOTSTRAP_START = FLASH_START(FLASH_FWBOOTSTRAP_START_SEC),
+ FLASH_FWBOOTSTRAP_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FWBOOTSTRAP_NSECS),
+
+ /*
* Location of Firmware Configuration File in FLASH.
*/
FLASH_CFG_START_SEC = 31,
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 4691505..42238ef 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -366,6 +366,17 @@ static int init_rss(struct adapter *adap)
return 0;
}
+/**
+ * Dump basic information about the adapter.
+ */
+static void print_adapter_info(struct adapter *adap)
+{
+ /**
+ * Hardware/Firmware/etc. Version/Revision IDs.
+ */
+ t4_dump_version_info(adap);
+}
+
static void print_port_info(struct adapter *adap)
{
int i;
@@ -648,18 +659,7 @@ static int adap_init0(struct adapter *adap)
state = (enum dev_state)((unsigned)state & ~DEV_STATE_INIT);
}
- t4_get_fw_version(adap, &adap->params.fw_vers);
- t4_get_tp_version(adap, &adap->params.tp_vers);
-
- dev_info(adap, "fw: %u.%u.%u.%u, TP: %u.%u.%u.%u\n",
- G_FW_HDR_FW_VER_MAJOR(adap->params.fw_vers),
- G_FW_HDR_FW_VER_MINOR(adap->params.fw_vers),
- G_FW_HDR_FW_VER_MICRO(adap->params.fw_vers),
- G_FW_HDR_FW_VER_BUILD(adap->params.fw_vers),
- G_FW_HDR_FW_VER_MAJOR(adap->params.tp_vers),
- G_FW_HDR_FW_VER_MINOR(adap->params.tp_vers),
- G_FW_HDR_FW_VER_MICRO(adap->params.tp_vers),
- G_FW_HDR_FW_VER_BUILD(adap->params.tp_vers));
+ t4_get_version_info(adap);
ret = t4_get_core_clock(adap, &adap->params.vpd);
if (ret < 0) {
@@ -1206,6 +1206,7 @@ int cxgbe_probe(struct adapter *adapter)
cfg_queues(adapter->eth_dev);
+ print_adapter_info(adapter);
print_port_info(adapter);
err = init_rss(adapter);
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 08/13] cxgbe: update TX path for Chelsio T6
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (6 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 07/13] cxgbe: update hardware info prints Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 09/13] cxgbe: update RXQ channel mapping " Rahul Lakkireddy
` (6 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Update TX path to reflect Chelsio T6 changes.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/sge.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index 2f9e12c..699b577 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -771,7 +771,7 @@ static u64 hwcsum(enum chip_type chip, const struct rte_mbuf *m)
}
if (likely(csum_type >= TX_CSUM_TCPIP)) {
- int hdr_len = V_TXPKT_IPHDR_LEN(m->l3_len);
+ u64 hdr_len = V_TXPKT_IPHDR_LEN(m->l3_len);
int eth_hdr_len = m->l2_len;
if (CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5)
@@ -1185,9 +1185,15 @@ int t4_eth_xmit(struct sge_eth_txq *txq, struct rte_mbuf *mbuf)
else
lso->len = htonl(V_LSO_T5_XFER_SIZE(m->pkt_len));
cpl = (void *)(lso + 1);
- cntrl = V_TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) |
- V_TXPKT_IPHDR_LEN(l3hdr_len) |
- V_TXPKT_ETHHDR_LEN(eth_xtra_len);
+
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
+ cntrl = V_TXPKT_ETHHDR_LEN(eth_xtra_len);
+ else
+ cntrl = V_T6_TXPKT_ETHHDR_LEN(eth_xtra_len);
+
+ cntrl |= V_TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 :
+ TX_CSUM_TCPIP) |
+ V_TXPKT_IPHDR_LEN(l3hdr_len);
txq->stats.tso++;
txq->stats.tx_cso += m->tso_segsz;
}
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 09/13] cxgbe: update RXQ channel mapping for Chelsio T6
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (7 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 08/13] cxgbe: update TX path for Chelsio T6 Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 10/13] cxgbe: update RX path " Rahul Lakkireddy
` (5 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Update MPS buffer groups and TP ingress channel congestion map to
correct RXQ allocation for Chelsio T6.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/common.h | 3 +-
drivers/net/cxgbe/base/t4_hw.c | 85 ++++++++++++++++++++++++++++++++++++----
drivers/net/cxgbe/cxgbe_ethdev.c | 4 +-
3 files changed, 81 insertions(+), 11 deletions(-)
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index dd8da0a..9383628 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -384,7 +384,8 @@ int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p);
int t4_read_flash(struct adapter *adapter, unsigned int addr,
unsigned int nwords, u32 *data, int byte_oriented);
int t4_flash_cfg_addr(struct adapter *adapter);
-unsigned int t4_get_mps_bg_map(struct adapter *adapter, int idx);
+unsigned int t4_get_mps_bg_map(struct adapter *adapter, unsigned int pidx);
+unsigned int t4_get_tp_ch_map(struct adapter *adapter, unsigned int pidx);
const char *t4_get_port_type_description(enum fw_port_type port_type);
void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p);
void t4_get_port_stats_offset(struct adapter *adap, int idx,
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 787494b..4e1545a 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -2844,21 +2844,90 @@ const char *t4_get_port_type_description(enum fw_port_type port_type)
/**
* t4_get_mps_bg_map - return the buffer groups associated with a port
* @adap: the adapter
- * @idx: the port index
+ * @pidx: the port index
*
* Returns a bitmap indicating which MPS buffer groups are associated
* with the given port. Bit i is set if buffer group i is used by the
* port.
*/
-unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx)
+unsigned int t4_get_mps_bg_map(struct adapter *adap, unsigned int pidx)
+{
+ unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
+ unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adap,
+ A_MPS_CMN_CTL));
+
+ if (pidx >= nports) {
+ dev_warn(adap, "MPS Port Index %d >= Nports %d\n",
+ pidx, nports);
+ return 0;
+ }
+
+ switch (chip_version) {
+ case CHELSIO_T4:
+ case CHELSIO_T5:
+ switch (nports) {
+ case 1: return 0xf;
+ case 2: return 3 << (2 * pidx);
+ case 4: return 1 << pidx;
+ }
+ break;
+
+ case CHELSIO_T6:
+ switch (nports) {
+ case 2: return 1 << (2 * pidx);
+ }
+ break;
+ }
+
+ dev_err(adap, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
+ chip_version, nports);
+ return 0;
+}
+
+/**
+ * t4_get_tp_ch_map - return TP ingress channels associated with a port
+ * @adapter: the adapter
+ * @pidx: the port index
+ *
+ * Returns a bitmap indicating which TP Ingress Channels are associated with
+ * a given Port. Bit i is set if TP Ingress Channel i is used by the Port.
+ */
+unsigned int t4_get_tp_ch_map(struct adapter *adapter, unsigned int pidx)
{
- u32 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL));
+ unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
+ unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adapter,
+ A_MPS_CMN_CTL));
+
+ if (pidx >= nports) {
+ dev_warn(adap, "TP Port Index %d >= Nports %d\n",
+ pidx, nports);
+ return 0;
+ }
+
+ switch (chip_version) {
+ case CHELSIO_T4:
+ case CHELSIO_T5:
+ /* Note that this happens to be the same values as the MPS
+ * Buffer Group Map for these Chips. But we replicate the code
+ * here because they're really separate concepts.
+ */
+ switch (nports) {
+ case 1: return 0xf;
+ case 2: return 3 << (2 * pidx);
+ case 4: return 1 << pidx;
+ }
+ break;
+
+ case CHELSIO_T6:
+ switch (nports) {
+ case 2: return 1 << pidx;
+ }
+ break;
+ }
- if (n == 0)
- return idx == 0 ? 0xf : 0;
- if (n == 1)
- return idx < 2 ? (3 << (2 * idx)) : 0;
- return 1 << idx;
+ dev_err(adapter, "Need TP Channel Map for Chip %0x, Nports %d\n",
+ chip_version, nports);
+ return 0;
}
/**
diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c
index 2e2f2cf..e51becb 100644
--- a/drivers/net/cxgbe/cxgbe_ethdev.c
+++ b/drivers/net/cxgbe/cxgbe_ethdev.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -617,7 +617,7 @@ static int cxgbe_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
err = t4_sge_alloc_rxq(adapter, &rxq->rspq, false, eth_dev, msi_idx,
&rxq->fl, t4_ethrx_handler,
- t4_get_mps_bg_map(adapter, pi->tx_chan), mp,
+ t4_get_tp_ch_map(adapter, pi->tx_chan), mp,
queue_idx, socket_id);
dev_debug(adapter, "%s: err = %d; port_id = %d; cntxt_id = %u\n",
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 10/13] cxgbe: update RX path for Chelsio T6
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (8 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 09/13] cxgbe: update RXQ channel mapping " Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 11/13] cxgbe: add compressed error vector Rahul Lakkireddy
` (4 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Update RX path to reflect Chelsio T6 register value changes.
Update ingress pack boundary value based on maximum payload size
that can be accommodated by underlying PCI. Update ingress pad
boundary value based on smallest memory controller bus width
possible. Enforce alignment for free list pointer start address.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/adapter.h | 4 +-
drivers/net/cxgbe/base/common.h | 1 +
drivers/net/cxgbe/base/t4_hw.c | 104 +++++++++++++++++++++++++++++---
drivers/net/cxgbe/base/t4_regs_values.h | 7 ++-
drivers/net/cxgbe/sge.c | 48 ++++-----------
5 files changed, 117 insertions(+), 47 deletions(-)
diff --git a/drivers/net/cxgbe/base/adapter.h b/drivers/net/cxgbe/base/adapter.h
index 2680790..cc89e49 100644
--- a/drivers/net/cxgbe/base/adapter.h
+++ b/drivers/net/cxgbe/base/adapter.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2016 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -459,7 +459,9 @@ static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_LIST_ID 0 /* Capability ID */
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
+#define PCI_EXP_DEVCTL 0x0008 /* Device control */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL_PAYLOAD 0x00E0 /* Max payload */
#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */
#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 9383628..5765bf3 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -282,6 +282,7 @@ int t4_fw_bye(struct adapter *adap, unsigned int mbox);
int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset);
int t4_fw_halt(struct adapter *adap, unsigned int mbox, int reset);
int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset);
+int t4_fl_pkt_align(struct adapter *adap);
int t4_fixup_host_params_compat(struct adapter *adap, unsigned int page_size,
unsigned int cache_line_size,
enum chip_type chip_compat);
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 4e1545a..96d4bfd 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -3358,6 +3358,49 @@ int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
}
/**
+ * t4_fl_pkt_align - return the fl packet alignment
+ * @adap: the adapter
+ *
+ * T4 has a single field to specify the packing and padding boundary.
+ * T5 onwards has separate fields for this and hence the alignment for
+ * next packet offset is maximum of these two.
+ */
+int t4_fl_pkt_align(struct adapter *adap)
+{
+ u32 sge_control, sge_control2;
+ unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
+
+ sge_control = t4_read_reg(adap, A_SGE_CONTROL);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications.
+ */
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
+ ingpad_shift = X_INGPADBOUNDARY_SHIFT;
+ else
+ ingpad_shift = X_T6_INGPADBOUNDARY_SHIFT;
+
+ ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) + ingpad_shift);
+
+ fl_align = ingpadboundary;
+ if (!is_t4(adap->params.chip)) {
+ sge_control2 = t4_read_reg(adap, A_SGE_CONTROL2);
+ ingpackboundary = G_INGPACKBOUNDARY(sge_control2);
+ if (ingpackboundary == X_INGPACKBOUNDARY_16B)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ X_INGPACKBOUNDARY_SHIFT);
+
+ fl_align = max(ingpadboundary, ingpackboundary);
+ }
+ return fl_align;
+}
+
+/**
* t4_fixup_host_params_compat - fix up host-dependent parameters
* @adap: the adapter
* @page_size: the host's Base Page Size
@@ -3402,6 +3445,10 @@ int t4_fixup_host_params_compat(struct adapter *adap,
X_INGPADBOUNDARY_SHIFT) |
V_EGRSTATUSPAGESIZE(stat_len != 64));
else {
+ unsigned int pack_align;
+ unsigned int ingpad, ingpack;
+ unsigned int pcie_cap;
+
/*
* T5 introduced the separation of the Free List Padding and
* Packing Boundaries. Thus, we can select a smaller Padding
@@ -3415,12 +3462,34 @@ int t4_fixup_host_params_compat(struct adapter *adap,
* Size (the minimum unit of transfer to/from Memory). If we
* have a Padding Boundary which is smaller than the Memory
* Line Size, that'll involve a Read-Modify-Write cycle on the
- * Memory Controller which is never good. For T5 the smallest
- * Padding Boundary which we can select is 32 bytes which is
- * larger than any known Memory Controller Line Size so we'll
- * use that.
+ * Memory Controller which is never good.
*/
+ /* We want the Packing Boundary to be based on the Cache Line
+ * Size in order to help avoid False Sharing performance
+ * issues between CPUs, etc. We also want the Packing
+ * Boundary to incorporate the PCI-E Maximum Payload Size. We
+ * get best performance when the Packing Boundary is a
+ * multiple of the Maximum Payload Size.
+ */
+ pack_align = fl_align;
+ pcie_cap = t4_os_find_pci_capability(adap, PCI_CAP_ID_EXP);
+ if (pcie_cap) {
+ unsigned int mps, mps_log;
+ u16 devctl;
+
+ /* The PCIe Device Control Maximum Payload Size field
+ * [bits 7:5] encodes sizes as powers of 2 starting at
+ * 128 bytes.
+ */
+ t4_os_pci_read_cfg2(adap, pcie_cap + PCI_EXP_DEVCTL,
+ &devctl);
+ mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
+ mps = 1 << mps_log;
+ if (mps > pack_align)
+ pack_align = mps;
+ }
+
/*
* N.B. T5 has a different interpretation of the "0" value for
* the Packing Boundary. This corresponds to 16 bytes instead
@@ -3429,19 +3498,36 @@ int t4_fixup_host_params_compat(struct adapter *adap,
* on the other hand, if we wanted 32 bytes, the best we can
* really do is 64 bytes ...
*/
- if (fl_align <= 32) {
+ if (pack_align <= 16) {
+ ingpack = X_INGPACKBOUNDARY_16B;
+ fl_align = 16;
+ } else if (pack_align == 32) {
+ ingpack = X_INGPACKBOUNDARY_64B;
fl_align = 64;
- fl_align_log = 6;
+ } else {
+ unsigned int pack_align_log = cxgbe_fls(pack_align) - 1;
+
+ ingpack = pack_align_log - X_INGPACKBOUNDARY_SHIFT;
+ fl_align = pack_align;
}
+
+ /* Use the smallest Ingress Padding which isn't smaller than
+ * the Memory Controller Read/Write Size. We'll take that as
+ * being 8 bytes since we don't know of any system with a
+ * wider Memory Controller Bus Width.
+ */
+ if (is_t5(adap->params.chip))
+ ingpad = X_INGPADBOUNDARY_32B;
+ else
+ ingpad = X_T6_INGPADBOUNDARY_8B;
t4_set_reg_field(adap, A_SGE_CONTROL,
V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
F_EGRSTATUSPAGESIZE,
- V_INGPADBOUNDARY(X_INGPCIEBOUNDARY_32B) |
+ V_INGPADBOUNDARY(ingpad) |
V_EGRSTATUSPAGESIZE(stat_len != 64));
t4_set_reg_field(adap, A_SGE_CONTROL2,
V_INGPACKBOUNDARY(M_INGPACKBOUNDARY),
- V_INGPACKBOUNDARY(fl_align_log -
- X_INGPACKBOUNDARY_SHIFT));
+ V_INGPACKBOUNDARY(ingpack));
}
/*
diff --git a/drivers/net/cxgbe/base/t4_regs_values.h b/drivers/net/cxgbe/base/t4_regs_values.h
index d7d3144..1326594 100644
--- a/drivers/net/cxgbe/base/t4_regs_values.h
+++ b/drivers/net/cxgbe/base/t4_regs_values.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -55,10 +55,15 @@
#define X_RXPKTCPLMODE_SPLIT 1
#define X_INGPCIEBOUNDARY_32B 0
#define X_INGPADBOUNDARY_SHIFT 5
+#define X_INGPADBOUNDARY_32B 0
+
+#define X_T6_INGPADBOUNDARY_SHIFT 3
+#define X_T6_INGPADBOUNDARY_8B 0
/* CONTROL2 register */
#define X_INGPACKBOUNDARY_SHIFT 5
#define X_INGPACKBOUNDARY_16B 0
+#define X_INGPACKBOUNDARY_64B 1
/* GTS register */
#define X_TIMERREG_RESTART_COUNTER 6
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index 699b577..b16a0bf 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -420,7 +420,9 @@ static unsigned int refill_fl_usembufs(struct adapter *adap, struct sge_fl *q,
mbuf->nb_segs = 1;
mbuf->port = rxq->rspq.port_id;
- mapping = (dma_addr_t)(mbuf->buf_physaddr + mbuf->data_off);
+ mapping = (dma_addr_t)RTE_ALIGN(mbuf->buf_physaddr +
+ mbuf->data_off,
+ adap->sge.fl_align);
mapping |= buf_size_idx;
*d++ = cpu_to_be64(mapping);
set_rx_sw_desc(sd, mbuf, mapping);
@@ -1684,8 +1686,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
if (fl) {
struct sge_eth_rxq *rxq = container_of(fl, struct sge_eth_rxq,
fl);
- enum chip_type chip = (enum chip_type)CHELSIO_CHIP_VERSION(
- adap->params.chip);
+ unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
/*
* Allocate the ring for the hardware free list (with space
@@ -1731,9 +1732,12 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
* Hence maximum allowed burst size will be 448 bytes.
*/
c.fl0dcaen_to_fl0cidxfthresh =
- htons(V_FW_IQ_CMD_FL0FBMIN(X_FETCHBURSTMIN_128B) |
- V_FW_IQ_CMD_FL0FBMAX((chip <= CHELSIO_T5) ?
- X_FETCHBURSTMAX_512B : X_FETCHBURSTMAX_256B));
+ htons(V_FW_IQ_CMD_FL0FBMIN(chip_ver <= CHELSIO_T5 ?
+ X_FETCHBURSTMIN_128B :
+ X_FETCHBURSTMIN_64B) |
+ V_FW_IQ_CMD_FL0FBMAX(chip_ver <= CHELSIO_T5 ?
+ X_FETCHBURSTMAX_512B :
+ X_FETCHBURSTMAX_256B));
c.fl0size = htons(flsz);
c.fl0addr = cpu_to_be64(fl->addr);
}
@@ -2189,8 +2193,7 @@ static int t4_sge_init_soft(struct adapter *adap)
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_control2, sge_conm_ctrl;
- unsigned int ingpadboundary, ingpackboundary;
+ u32 sge_control, sge_conm_ctrl;
int ret, egress_threshold;
/*
@@ -2200,34 +2203,7 @@ int t4_sge_init(struct adapter *adap)
sge_control = t4_read_reg(adap, A_SGE_CONTROL);
s->pktshift = G_PKTSHIFT(sge_control);
s->stat_len = (sge_control & F_EGRSTATUSPAGESIZE) ? 128 : 64;
-
- /*
- * T4 uses a single control field to specify both the PCIe Padding and
- * Packing Boundary. T5 introduced the ability to specify these
- * separately. The actual Ingress Packet Data alignment boundary
- * within Packed Buffer Mode is the maximum of these two
- * specifications.
- */
- ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) +
- X_INGPADBOUNDARY_SHIFT);
- s->fl_align = ingpadboundary;
-
- if (!is_t4(adap->params.chip) && !adap->use_unpacked_mode) {
- /*
- * T5 has a weird interpretation of one of the PCIe Packing
- * Boundary values. No idea why ...
- */
- sge_control2 = t4_read_reg(adap, A_SGE_CONTROL2);
- ingpackboundary = G_INGPACKBOUNDARY(sge_control2);
- if (ingpackboundary == X_INGPACKBOUNDARY_16B)
- ingpackboundary = 16;
- else
- ingpackboundary = 1 << (ingpackboundary +
- X_INGPACKBOUNDARY_SHIFT);
-
- s->fl_align = max(ingpadboundary, ingpackboundary);
- }
-
+ s->fl_align = t4_fl_pkt_align(adap);
ret = t4_sge_init_soft(adap);
if (ret < 0) {
dev_err(adap, "%s: t4_sge_init_soft failed, error %d\n",
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 11/13] cxgbe: add compressed error vector
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (9 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 10/13] cxgbe: update RX path " Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 12/13] cxgbe: fix port statistics Rahul Lakkireddy
` (3 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Add support for compressed error vector available in cpl_rx_pkt for
Chelsio T6.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/common.h | 5 +++++
drivers/net/cxgbe/base/t4_hw.c | 8 ++++++++
drivers/net/cxgbe/base/t4_msg.h | 16 +++++++++++++++-
drivers/net/cxgbe/base/t4_regs.h | 6 ++++++
drivers/net/cxgbe/sge.c | 21 +++++++++++++++++++--
5 files changed, 53 insertions(+), 3 deletions(-)
diff --git a/drivers/net/cxgbe/base/common.h b/drivers/net/cxgbe/base/common.h
index 5765bf3..1eda57d 100644
--- a/drivers/net/cxgbe/base/common.h
+++ b/drivers/net/cxgbe/base/common.h
@@ -157,6 +157,11 @@ struct tp_params {
u32 vlan_pri_map; /* cached TP_VLAN_PRI_MAP */
u32 ingress_config; /* cached TP_INGRESS_CONFIG */
+ /* cached TP_OUT_CONFIG compressed error vector
+ * and passing outer header info for encapsulated packets.
+ */
+ int rx_pkt_encap;
+
/*
* TP_VLAN_PRI_MAP Compressed Filter Tuple field offsets. This is a
* subset of the set of fields which may be present in the Compressed
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 96d4bfd..94abd5b 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -4594,6 +4594,14 @@ int t4_init_tp_params(struct adapter *adap)
&adap->params.tp.ingress_config, 1,
A_TP_INGRESS_CONFIG);
+ /* For T6, cache the adapter's compressed error vector
+ * and passing outer header info for encapsulated packets.
+ */
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
+ v = t4_read_reg(adap, A_TP_OUT_CONFIG);
+ adap->params.tp.rx_pkt_encap = (v & F_CRXPKTENC) ? 1 : 0;
+ }
+
/*
* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
* shift positions of several elements of the Compressed Filter Tuple
diff --git a/drivers/net/cxgbe/base/t4_msg.h b/drivers/net/cxgbe/base/t4_msg.h
index 4b04cd0..6acd749 100644
--- a/drivers/net/cxgbe/base/t4_msg.h
+++ b/drivers/net/cxgbe/base/t4_msg.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2014-2015 Chelsio Communications.
+ * Copyright(c) 2014-2017 Chelsio Communications.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -262,6 +262,20 @@ struct cpl_rx_pkt {
#define V_RXF_IP6(x) ((x) << S_RXF_IP6)
#define F_RXF_IP6 V_RXF_IP6(1U)
+/* rx_pkt.err_vec fields */
+/* In T6, rx_pkt.err_vec indicates
+ * RxError Error vector (16b) or
+ * Encapsulating header length (8b),
+ * Outer encapsulation type (2b) and
+ * compressed error vector (6b) if CRxPktEnc is
+ * enabled in TP_OUT_CONFIG
+ */
+#define S_T6_COMPR_RXERR_VEC 0
+#define M_T6_COMPR_RXERR_VEC 0x3F
+#define V_T6_COMPR_RXERR_VEC(x) ((x) << S_T6_COMPR_RXERR_VEC)
+#define G_T6_COMPR_RXERR_VEC(x) \
+ (((x) >> S_T6_COMPR_RXERR_VEC) & M_T6_COMPR_RXERR_VEC)
+
/* cpl_fw*.type values */
enum {
FW_TYPE_RSSCPL = 4,
diff --git a/drivers/net/cxgbe/base/t4_regs.h b/drivers/net/cxgbe/base/t4_regs.h
index eb23614..8dc1f58 100644
--- a/drivers/net/cxgbe/base/t4_regs.h
+++ b/drivers/net/cxgbe/base/t4_regs.h
@@ -443,6 +443,12 @@
#define F_UPCRST V_UPCRST(1U)
/* registers for module TP */
+#define A_TP_OUT_CONFIG 0x7d04
+
+#define S_CRXPKTENC 3
+#define V_CRXPKTENC(x) ((x) << S_CRXPKTENC)
+#define F_CRXPKTENC V_CRXPKTENC(1U)
+
#define TP_BASE_ADDR 0x7d00
#define A_TP_TIMER_RESOLUTION 0x7d90
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index b16a0bf..020879a 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -1352,10 +1352,16 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
const struct rss_header *rss_hdr;
bool csum_ok;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+ u16 err_vec;
rss_hdr = (const void *)rsp;
pkt = (const void *)&rsp[1];
- csum_ok = pkt->csum_calc && !pkt->err_vec;
+ /* Compressed error vector is enabled for T6 only */
+ if (q->adapter->params.tp.rx_pkt_encap)
+ err_vec = G_T6_COMPR_RXERR_VEC(ntohs(pkt->err_vec));
+ else
+ err_vec = ntohs(pkt->err_vec);
+ csum_ok = pkt->csum_calc && !err_vec;
mbuf = t4_pktgl_to_mbuf(si);
if (unlikely(!mbuf)) {
@@ -1466,9 +1472,10 @@ static int process_responses(struct sge_rspq *q, int budget,
(const void *)q->cur_desc;
const struct cpl_rx_pkt *cpl =
(const void *)&q->cur_desc[1];
- bool csum_ok = cpl->csum_calc && !cpl->err_vec;
struct rte_mbuf *pkt, *npkt;
u32 len, bufsz;
+ bool csum_ok;
+ u16 err_vec;
len = ntohl(rc->pldbuflen_qid);
BUG_ON(!(len & F_RSPD_NEWBUF));
@@ -1477,6 +1484,16 @@ static int process_responses(struct sge_rspq *q, int budget,
len = G_RSPD_LEN(len);
pkt->pkt_len = len;
+ /* Compressed error vector is enabled for
+ * T6 only
+ */
+ if (q->adapter->params.tp.rx_pkt_encap)
+ err_vec = G_T6_COMPR_RXERR_VEC(
+ ntohs(cpl->err_vec));
+ else
+ err_vec = ntohs(cpl->err_vec);
+ csum_ok = cpl->csum_calc && !err_vec;
+
/* Chain mbufs into len if necessary */
while (len) {
struct rte_mbuf *new_pkt = rsd->buf;
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 12/13] cxgbe: fix port statistics
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (10 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 11/13] cxgbe: add compressed error vector Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 13/13] cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags Rahul Lakkireddy
` (2 subsequent siblings)
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Do not count pause frames as part of normal TX/RX Frame/Byte counts.
Also, switch to using software counters rather than hardware for RX
stats.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/base/t4_hw.c | 20 ++++++++++++++++++++
drivers/net/cxgbe/base/t4_regs.h | 18 ++++++++++++++++++
drivers/net/cxgbe/cxgbe_ethdev.c | 4 ++--
3 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c
index 94abd5b..83a542d 100644
--- a/drivers/net/cxgbe/base/t4_hw.c
+++ b/drivers/net/cxgbe/base/t4_hw.c
@@ -2941,6 +2941,7 @@ unsigned int t4_get_tp_ch_map(struct adapter *adapter, unsigned int pidx)
void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
{
u32 bgmap = t4_get_mps_bg_map(adap, idx);
+ u32 stat_ctl = t4_read_reg(adap, A_MPS_STAT_CTL);
#define GET_STAT(name) \
t4_read_reg64(adap, \
@@ -2973,6 +2974,15 @@ void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
+ if (stat_ctl & F_COUNTPAUSESTATTX) {
+ p->tx_frames -= p->tx_pause;
+ p->tx_octets -= p->tx_pause * 64;
+ }
+ if (stat_ctl & F_COUNTPAUSEMCTX)
+ p->tx_mcast_frames -= p->tx_pause;
+ }
+
p->rx_octets = GET_STAT(RX_PORT_BYTES);
p->rx_frames = GET_STAT(RX_PORT_FRAMES);
p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
@@ -3000,6 +3010,16 @@ void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
+
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
+ if (stat_ctl & F_COUNTPAUSESTATRX) {
+ p->rx_frames -= p->rx_pause;
+ p->rx_octets -= p->rx_pause * 64;
+ }
+ if (stat_ctl & F_COUNTPAUSEMCRX)
+ p->rx_mcast_frames -= p->rx_pause;
+ }
+
p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
diff --git a/drivers/net/cxgbe/base/t4_regs.h b/drivers/net/cxgbe/base/t4_regs.h
index 8dc1f58..289c7e4 100644
--- a/drivers/net/cxgbe/base/t4_regs.h
+++ b/drivers/net/cxgbe/base/t4_regs.h
@@ -559,6 +559,24 @@
#define V_VF(x) ((x) << S_VF)
#define G_VF(x) (((x) >> S_VF) & M_VF)
+#define A_MPS_STAT_CTL 0x9600
+
+#define S_COUNTPAUSEMCRX 5
+#define V_COUNTPAUSEMCRX(x) ((x) << S_COUNTPAUSEMCRX)
+#define F_COUNTPAUSEMCRX V_COUNTPAUSEMCRX(1U)
+
+#define S_COUNTPAUSESTATRX 4
+#define V_COUNTPAUSESTATRX(x) ((x) << S_COUNTPAUSESTATRX)
+#define F_COUNTPAUSESTATRX V_COUNTPAUSESTATRX(1U)
+
+#define S_COUNTPAUSEMCTX 3
+#define V_COUNTPAUSEMCTX(x) ((x) << S_COUNTPAUSEMCTX)
+#define F_COUNTPAUSEMCTX V_COUNTPAUSEMCTX(1U)
+
+#define S_COUNTPAUSESTATTX 2
+#define V_COUNTPAUSESTATTX(x) ((x) << S_COUNTPAUSESTATTX)
+#define F_COUNTPAUSESTATTX V_COUNTPAUSESTATTX(1U)
+
#define A_MPS_PORT_STAT_TX_PORT_BYTES_L 0x400
#define A_MPS_PORT_STAT_TX_PORT_BYTES_H 0x404
#define A_MPS_PORT_STAT_TX_PORT_FRAMES_L 0x408
diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c
index e51becb..03fc15e 100644
--- a/drivers/net/cxgbe/cxgbe_ethdev.c
+++ b/drivers/net/cxgbe/cxgbe_ethdev.c
@@ -657,8 +657,6 @@ static void cxgbe_dev_stats_get(struct rte_eth_dev *eth_dev,
cxgbe_stats_get(pi, &ps);
/* RX Stats */
- eth_stats->ipackets = ps.rx_frames;
- eth_stats->ibytes = ps.rx_octets;
eth_stats->imissed = ps.rx_ovflow0 + ps.rx_ovflow1 +
ps.rx_ovflow2 + ps.rx_ovflow3 +
ps.rx_trunc0 + ps.rx_trunc1 +
@@ -678,6 +676,8 @@ static void cxgbe_dev_stats_get(struct rte_eth_dev *eth_dev,
eth_stats->q_ipackets[i] = rxq->stats.pkts;
eth_stats->q_ibytes[i] = rxq->stats.rx_bytes;
+ eth_stats->ipackets += eth_stats->q_ipackets[i];
+ eth_stats->ibytes += eth_stats->q_ibytes[i];
}
for (i = 0; i < pi->n_tx_qsets; i++) {
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [dpdk-dev] [PATCH 13/13] cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (11 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 12/13] cxgbe: fix port statistics Rahul Lakkireddy
@ 2017-05-27 3:46 ` Rahul Lakkireddy
2017-05-30 10:28 ` [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Thomas Monjalon
2017-05-30 10:39 ` Ferruh Yigit
14 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-05-27 3:46 UTC (permalink / raw)
To: dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi,
Rahul Lakkireddy
Remove RTE_PCI_DRV_INTR_LSC from driver flags, since LSC interrupts
are currently not supported.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
drivers/net/cxgbe/cxgbe_ethdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c
index 03fc15e..ac70f22 100644
--- a/drivers/net/cxgbe/cxgbe_ethdev.c
+++ b/drivers/net/cxgbe/cxgbe_ethdev.c
@@ -1054,7 +1054,7 @@ static int eth_cxgbe_pci_remove(struct rte_pci_device *pci_dev)
static struct rte_pci_driver rte_cxgbe_pmd = {
.id_table = cxgb4_pci_tbl,
- .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
.probe = eth_cxgbe_pci_probe,
.remove = eth_cxgbe_pci_remove,
};
--
2.5.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (12 preceding siblings ...)
2017-05-27 3:46 ` [dpdk-dev] [PATCH 13/13] cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags Rahul Lakkireddy
@ 2017-05-30 10:28 ` Thomas Monjalon
2017-06-01 16:02 ` Rahul Lakkireddy
2017-05-30 10:39 ` Ferruh Yigit
14 siblings, 1 reply; 19+ messages in thread
From: Thomas Monjalon @ 2017-05-30 10:28 UTC (permalink / raw)
To: Rahul Lakkireddy
Cc: dev, Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi
27/05/2017 05:46, Rahul Lakkireddy:
> This series of patches add support for Chelsio T6 family of adapters.
It is almost one year since your last contribution,
welcome back Rahul :)
During that time, rte_flow has been implemented in DPDK.
Do you plan to use it for Chelsio offloads, instead of flow director?
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards
2017-05-27 3:46 ` [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards Rahul Lakkireddy
@ 2017-05-30 10:34 ` Ferruh Yigit
0 siblings, 0 replies; 19+ messages in thread
From: Ferruh Yigit @ 2017-05-30 10:34 UTC (permalink / raw)
To: Rahul Lakkireddy, dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi
On 5/27/2017 4:46 AM, Rahul Lakkireddy wrote:
> Add code to detect and run T6 devices. Update PCI ID Device table
> with Chelsio T6 device ids and update documentation.
Can you please update DPDK supported NICs web page [1] too, with a
separate web patch [2] ?
[1] http://dpdk.org/doc/nics
[2] http://dpdk.org/browse/tools/dpdk-web/
>
> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
<...>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules
2017-05-27 3:46 ` [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules Rahul Lakkireddy
@ 2017-05-30 10:37 ` Ferruh Yigit
0 siblings, 0 replies; 19+ messages in thread
From: Ferruh Yigit @ 2017-05-30 10:37 UTC (permalink / raw)
To: Rahul Lakkireddy, dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi
On 5/27/2017 4:46 AM, Rahul Lakkireddy wrote:
> Add 25G and 100G link speeds and update supported port modules.
Not with this patch, but with separate patch, can it be possible to
update speed_capa in cxgbe_dev_info_get() to get device specific speed
capability, and update doc/guides/nics/features/cxgbe.ini to announce
"Speed capabilities" feature by driver?
>
> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
<...>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
` (13 preceding siblings ...)
2017-05-30 10:28 ` [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Thomas Monjalon
@ 2017-05-30 10:39 ` Ferruh Yigit
14 siblings, 0 replies; 19+ messages in thread
From: Ferruh Yigit @ 2017-05-30 10:39 UTC (permalink / raw)
To: Rahul Lakkireddy, dev
Cc: Nirranjan Kirubaharan, Indranil Choudhury, Kumar Sanghvi
On 5/27/2017 4:46 AM, Rahul Lakkireddy wrote:
> This series of patches add support for Chelsio T6 family of adapters.
>
> Patches 1 - 4 update CXGBE PMD to detect and run Chelsio T6 cards.
>
> Patches 5 - 6 add new link speeds and update port modules.
>
> Patch 7 updates information prints to accommodate Chelsio T6 cards.
>
> Patch 8 updates TX path to reflect Chelsio T6 changes.
>
> Patches 9 - 11 update RX path to reflect Chelsio T6 changes.
>
> Patch 12 updates port statistics to not accumulate pause frames
> as part of packet count and also fixes issue with rx counters.
>
> Patch 13 removes RTE_PCI_DRV_INTR_LSC flag from CXGBE PMD since
> it doesn't handle direct LSC interrupts.
>
> Thanks,
> Rahul
>
> Rahul Lakkireddy (13):
> cxgbe: add support to run Chelsio T6 cards
> cxgbe: update register dump
> cxgbe: update flash part information
> cxgbe: grab available ports after firmware reset
> cxgbe: update link speeds and port modules
> cxgbe: add forward error correction support
> cxgbe: update hardware info prints
> cxgbe: update TX path for Chelsio T6
> cxgbe: update RXQ channel mapping for Chelsio T6
> cxgbe: update RX path for Chelsio T6
> cxgbe: add compressed error vector
> cxgbe: fix port statistics
> cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags
Series applied to dpdk-next-net/master, thanks.
(some updates done on patch subjects)
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters
2017-05-30 10:28 ` [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Thomas Monjalon
@ 2017-06-01 16:02 ` Rahul Lakkireddy
0 siblings, 0 replies; 19+ messages in thread
From: Rahul Lakkireddy @ 2017-06-01 16:02 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, Nirranjan Kirubaharan, Indranil Choudhury, Kumar A S
On Tuesday, May 05/30/17, 2017 at 15:58:56 +0530, Thomas Monjalon wrote:
> 27/05/2017 05:46, Rahul Lakkireddy:
> > This series of patches add support for Chelsio T6 family of adapters.
>
> It is almost one year since your last contribution,
> welcome back Rahul :)
>
Can't believe it's been a year already. Feels great to be back! :)
> During that time, rte_flow has been implemented in DPDK.
> Do you plan to use it for Chelsio offloads, instead of flow director?
Yes, we do have plans to use rte_flow for our packet classification and
filtering instead of flow director.
Thanks,
Rahul
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2017-06-01 16:02 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-27 3:46 [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 01/13] cxgbe: add support to run Chelsio T6 cards Rahul Lakkireddy
2017-05-30 10:34 ` Ferruh Yigit
2017-05-27 3:46 ` [dpdk-dev] [PATCH 02/13] cxgbe: update register dump Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 03/13] cxgbe: update flash part information Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 04/13] cxgbe: grab available ports after firmware reset Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 05/13] cxgbe: update link speeds and port modules Rahul Lakkireddy
2017-05-30 10:37 ` Ferruh Yigit
2017-05-27 3:46 ` [dpdk-dev] [PATCH 06/13] cxgbe: add forward error correction support Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 07/13] cxgbe: update hardware info prints Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 08/13] cxgbe: update TX path for Chelsio T6 Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 09/13] cxgbe: update RXQ channel mapping " Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 10/13] cxgbe: update RX path " Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 11/13] cxgbe: add compressed error vector Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 12/13] cxgbe: fix port statistics Rahul Lakkireddy
2017-05-27 3:46 ` [dpdk-dev] [PATCH 13/13] cxgbe: remove RTE_PCI_DRV_INTR_LSC from driver flags Rahul Lakkireddy
2017-05-30 10:28 ` [dpdk-dev] [PATCH 00/13] cxgbe: add support for Chelsio T6 family of adapters Thomas Monjalon
2017-06-01 16:02 ` Rahul Lakkireddy
2017-05-30 10:39 ` Ferruh Yigit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).