From: "Peng, Yuan" <yuan.peng@intel.com>
To: "Zhao1, Wei" <wei.zhao1@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Zhao1, Wei" <wei.zhao1@intel.com>
Subject: Re: [dpdk-dev] [PATCH v4] net/ixgbe: fix filter parser error in L2 tunnel
Date: Fri, 3 Nov 2017 08:38:08 +0000 [thread overview]
Message-ID: <67D543A150B29E4CAAE53918F64EDAEA3745422D@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1509694718-62620-1-git-send-email-wei.zhao1@intel.com>
Tested-by: Peng Yuan <yuan.peng@intel.com>
- Tested Branch: dpdk-master
- Tested Commit: commit 6fb00f8baefa03b9cfd1b2dfc1787258b8459601
- OS: 4.8.6-300.fc25.x86_64
- GCC: gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1)
- CPU: Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
- NIC: X552/X557-AT 10GBASE-T [8086:15ad]
- Default x86_64-native-linuxapp-gcc configuration
- Prerequisites:
- Total 1 cases, 1 passed, 0 failed
Hardware:
dut: 10.240.176.192
tester: 10.240.176.191
X552/X557-AT 10g*2
Test steps:
Bind pf to igb_uio:
./usertools/dpdk-devbind.py -b igb_uio 03:00.0
add two vfs on dpdk pf, then bind the vfs to vfio-pci:
echo 2 >/sys/bus/pci/devices/0000:03:00.0/max_vfs
./usertools/dpdk-devbind.py -b vfio-pci 03:10.0 03:10.2
Start testpmd:
./x86_64-native-linuxapp-gcc/app/testpmd -c 1f -n 4 -m 1024 -w 03:00.0 --file-prefix=pf - -i --rxq=4 --txq=4
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
testpmd> port config 0 l2-tunnel E-tag enable
testpmd> E-tag set forwarding on port 0
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf0 -n 4 -w 03:10.0 --file-prefix=vf0 -m 1024 - -i --rxq=4 --txq=4 --disable-rss
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf00 -n 4 -w 03:10.2 --file-prefix=vf1 -m 1024 - -i --rxq=4 --txq=4 --disable-rss
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
1. create filter rules,
testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1309 / end actions vf id 0 / end
Flow rule #0 created
testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1308 / end actions vf id 1 / end
Flow rule #1 created
testpmd> flow create 0 ingress pattern e_tag grp_ecid_b is 0x1307 / end actions pf / end
Flow rule #2 created
2. send packets:
pkt1 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x309)/Raw('x' * 20)
pkt2 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x308)/Raw('x' * 20)
pkt3 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x1, ECIDbase=0x307)/Raw('x' * 20)
pkt4 = Ether(dst="00:11:22:33:44:55")/Dot1BR(GRP=0x2, ECIDbase=0x309)/Raw('x' * 20)
verify pkt1 to vf0 queue0, pkt2 to vf1 queue0, pkt3 to pf queue 0, pkt4 can't received by pf and vfs.
-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wei Zhao
Sent: Friday, November 3, 2017 3:39 PM
To: dev@dpdk.org
Cc: Zhao1, Wei <wei.zhao1@intel.com>
Subject: [dpdk-dev] [PATCH v4] net/ixgbe: fix filter parser error in L2 tunnel
The action for L2 tunnel should be VF or PF, not QUEUE.
Fixes: 99e7003831c ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
---
v2:
-add vf id check.
v3:
-add action support for PF.
v4:
-fix action type check error
---
drivers/net/ixgbe/ixgbe_flow.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index 82fc705..8bbc8b9 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -1095,7 +1095,7 @@ ixgbe_parse_syn_filter(struct rte_eth_dev *dev,
* The first not void item can be E_TAG.
* The next not void item must be END.
* action:
- * The first not void action should be QUEUE.
+ * The first not void action should be VF or PF.
* The next not void action should be END.
* pattern example:
* ITEM Spec Mask
@@ -1106,7 +1106,8 @@ ixgbe_parse_syn_filter(struct rte_eth_dev *dev,
* item->last should be NULL.
*/
static int
-cons_parse_l2_tn_filter(const struct rte_flow_attr *attr,
+cons_parse_l2_tn_filter(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
const struct rte_flow_item pattern[],
const struct rte_flow_action actions[],
struct rte_eth_l2_tunnel_conf *filter, @@ -1116,7 +1117,8 @@ cons_parse_l2_tn_filter(const struct rte_flow_attr *attr,
const struct rte_flow_item_e_tag *e_tag_spec;
const struct rte_flow_item_e_tag *e_tag_mask;
const struct rte_flow_action *act;
- const struct rte_flow_action_queue *act_q;
+ const struct rte_flow_action_vf *act_vf;
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
if (!pattern) {
rte_flow_error_set(error, EINVAL,
@@ -1224,9 +1226,10 @@ cons_parse_l2_tn_filter(const struct rte_flow_attr *attr,
return -rte_errno;
}
- /* check if the first not void action is QUEUE. */
+ /* check if the first not void action is VF or PF. */
act = next_no_void_action(actions, NULL);
- if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE) {
+ if (act->type != RTE_FLOW_ACTION_TYPE_VF &&
+ act->type != RTE_FLOW_ACTION_TYPE_PF) {
memset(filter, 0, sizeof(struct rte_eth_l2_tunnel_conf));
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1234,8 +1237,12 @@ cons_parse_l2_tn_filter(const struct rte_flow_attr *attr,
return -rte_errno;
}
- act_q = (const struct rte_flow_action_queue *)act->conf;
- filter->pool = act_q->index;
+ if (act->type == RTE_FLOW_ACTION_TYPE_VF) {
+ act_vf = (const struct rte_flow_action_vf *)act->conf;
+ filter->pool = act_vf->id;
+ } else {
+ filter->pool = pci_dev->max_vfs;
+ }
/* check if the next not void item is END */
act = next_no_void_action(actions, act); @@ -1260,8 +1267,10 @@ ixgbe_parse_l2_tn_filter(struct rte_eth_dev *dev, {
int ret = 0;
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint16_t vf_num;
- ret = cons_parse_l2_tn_filter(attr, pattern,
+ ret = cons_parse_l2_tn_filter(dev, attr, pattern,
actions, l2_tn_filter, error);
if (hw->mac.type != ixgbe_mac_X550 &&
@@ -1274,7 +1283,9 @@ ixgbe_parse_l2_tn_filter(struct rte_eth_dev *dev,
return -rte_errno;
}
- if (l2_tn_filter->pool >= dev->data->nb_rx_queues)
+ vf_num = pci_dev->max_vfs;
+
+ if (l2_tn_filter->pool > vf_num)
return -rte_errno;
return ret;
--
2.7.4
next prev parent reply other threads:[~2017-11-03 8:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-17 6:13 [dpdk-dev] [PATCH] net/ixgbe: add queue index check in filter Wei Zhao
2017-07-18 10:43 ` Ferruh Yigit
2017-07-19 3:50 ` Zhao1, Wei
2017-07-19 3:34 ` [dpdk-dev] [PATCH v2] " Wei Zhao
2017-07-19 8:56 ` Ferruh Yigit
2017-11-03 6:40 ` [dpdk-dev] [PATCH v3] net/ixgbe: fix filter parser error in L2 tunnel Wei Zhao
2017-11-03 7:38 ` [dpdk-dev] [PATCH v4] " Wei Zhao
2017-11-03 8:33 ` Peng, Yuan
2017-11-03 8:38 ` Peng, Yuan [this message]
2017-11-03 19:11 ` Ferruh Yigit
2017-11-03 18:54 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67D543A150B29E4CAAE53918F64EDAEA3745422D@SHSMSX103.ccr.corp.intel.com \
--to=yuan.peng@intel.com \
--cc=dev@dpdk.org \
--cc=wei.zhao1@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).