From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
To: "Morten Brørup" <mb@smartsharesystems.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Stephen Hemminger" <stephen@networkplumber.org>,
"Wathsala Vithanage" <wathsala.vithanage@arm.com>,
Fengchengwen <fengchengwen@huawei.com>,
"Bruce Richardson" <bruce.richardson@intel.com>
Subject: RE: [PATCH v5] mbuf: optimize segment prefree
Date: Thu, 23 Oct 2025 14:04:42 +0000 [thread overview]
Message-ID: <6a26d57153714d04865753fd557978dd@huawei.com> (raw)
In-Reply-To: <98CBD80474FA8B44BF855DF32C47DC35F654F7@smartserver.smartshare.dk>
> > From: Konstantin Ananyev [mailto:konstantin.ananyev@huawei.com]
> > Sent: Thursday, 23 October 2025 10.51
> >
> > > -#define RTE_MBUF_DIRECT(mb) \
> > > - (!((mb)->ol_flags & (RTE_MBUF_F_INDIRECT | RTE_MBUF_F_EXTERNAL)))
> > > + *
> > > + * Note: Macro optimized for code size.
> > > + *
> > > + * The plain macro would be:
> > > + * #define RTE_MBUF_DIRECT(mb) \
> > > + * (!((mb)->ol_flags & (RTE_MBUF_F_INDIRECT |
> > RTE_MBUF_F_EXTERNAL)))
> > > + *
> > > + * The flags RTE_MBUF_F_INDIRECT and RTE_MBUF_F_EXTERNAL are both in
> > the
> > > MSB (most significant
> > > + * byte) of the 64-bit ol_flags field, so we only compare this one
> > byte instead of all
> > > 64 bits.
> > > + *
> > > + * E.g., GCC version 16.0.0 20251019 (experimental) generates the
> > following code
> > > for x86-64.
> > > + *
> > > + * With the plain macro, 17 bytes of instructions:
> > > + * movabs rax,0x6000000000000000 // 10 bytes
> > > + * and rax,QWORD PTR [rdi+0x18] // 4 bytes
> > > + * sete al // 3 bytes
> > > + * With this optimized macro, only 7 bytes of instructions:
> > > + * test BYTE PTR [rdi+0x1f],0x60 // 4 bytes
> > > + * sete al // 3 bytes
> > > + */
> > > +#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> > > +/* On little endian architecture, the MSB of a 64-bit integer is at
> > byte offset 7. */
> > > +#define RTE_MBUF_DIRECT(mb) !(((const char *)(&(mb)-
> > >ol_flags))[7] & 0x60)
> > > +#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> > > +/* On big endian architecture, the MSB of a 64-bit integer is at
> > byte offset 0. */
> > > +#define RTE_MBUF_DIRECT(mb) !(((const char *)(&(mb)-
> > >ol_flags))[0] & 0x60)
> >
> > A stupid q: why then not simply do:
> > (mb->ol_flags >> 56) & 0x60
> > then?
> > Should help to all these LE/BE casts, etc.
>
> GCC is too stupid for that too.
>
> Playing around with Godbolt shows that
> return !((char)(p[3] >> 56) & 0x60);
> becomes
> movzx eax,BYTE PTR [rdi+0x1f] // 4 bytes
> test al,0x60 // 2 bytes
> Instead of simply
> test BYTE PTR [rdi+0x1f],0x60 // 4 bytes
And these 2 extra bytes in instructions, are that really that critical?
My guess, we wouldn't notice any real diff here.
But if it really is, can I ask you to create a new define for 0x60,
to avoid hardcoded constants in the code?
Might be something like
#define RTE_MBUF_F_INDIRECT_EXTERNAL_1B ...
or so.
Konstantin
> Good suggestion, though.
>
> >
> > > +#endif
> > > +/* Verify the optimization above. */
> > > +static_assert((RTE_MBUF_F_INDIRECT | RTE_MBUF_F_EXTERNAL) ==
> > > UINT64_C(0x60) << (7 * CHAR_BIT),
> > > + "(RTE_MBUF_F_INDIRECT | RTE_MBUF_F_EXTERNAL) is not 0x60 at
> > MSB");
> > >
> > > /** Uninitialized or unspecified port. */
> > > #define RTE_MBUF_PORT_INVALID UINT16_MAX
> > > --
> > > 2.43.0
next prev parent reply other threads:[~2025-10-23 14:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 21:35 [PATCH] " Morten Brørup
2025-08-27 23:17 ` Stephen Hemminger
2025-10-06 17:46 ` Wathsala Vithanage
2025-10-06 18:26 ` Morten Brørup
2025-10-06 14:49 ` Morten Brørup
2025-10-20 12:02 ` [PATCH v2] " Morten Brørup
2025-10-20 14:24 ` Konstantin Ananyev
2025-10-21 8:38 ` fengchengwen
2025-10-22 9:08 ` Bruce Richardson
2025-10-22 13:53 ` Morten Brørup
2025-10-22 14:12 ` Bruce Richardson
2025-10-22 14:14 ` Morten Brørup
2025-10-22 13:23 ` [PATCH v3] " Morten Brørup
2025-10-22 14:47 ` [PATCH v4] " Morten Brørup
2025-10-22 15:02 ` Bruce Richardson
2025-10-22 18:28 ` Morten Brørup
2025-10-23 7:04 ` Morten Brørup
2025-10-23 8:01 ` [PATCH v5] " Morten Brørup
2025-10-23 8:08 ` Bruce Richardson
2025-10-23 8:51 ` Konstantin Ananyev
2025-10-23 11:17 ` Morten Brørup
2025-10-23 14:04 ` Konstantin Ananyev [this message]
2025-10-23 14:48 ` Morten Brørup
2025-10-23 15:27 ` Konstantin Ananyev
2025-10-23 15:46 ` Morten Brørup
2025-10-23 16:03 ` Bruce Richardson
2025-10-23 16:24 ` Morten Brørup
2025-10-23 12:48 ` [PATCH v6] " Morten Brørup
2025-10-23 17:13 ` Thomas Monjalon
2025-10-23 16:18 ` [PATCH v7] " Morten Brørup
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a26d57153714d04865753fd557978dd@huawei.com \
--to=konstantin.ananyev@huawei.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=mb@smartsharesystems.com \
--cc=stephen@networkplumber.org \
--cc=wathsala.vithanage@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).