DPDK patches and discussions
 help / color / mirror / Atom feed
* [PATCH v2 1/2] net/bonding: introduce direct link bonding mode
@ 2024-04-12 12:27 Kamil Vojanec
  2024-04-12 12:27 ` [PATCH v2 2/2] doc/prog_guide: document " Kamil Vojanec
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Kamil Vojanec @ 2024-04-12 12:27 UTC (permalink / raw)
  To: dev; +Cc: Kamil Vojanec, Chas Williams, Min Hu (Connor)

This patch adds a new bonding mode: 'direct'. The purpose of this mode
is to redirect output packets to the same member port on which they were
received. In case the requested port is not among the member ports,
round robin TX mode is used as a fallback.

Signed-off-by: Kamil Vojanec <vojanec@cesnet.cz>
---
 app/test/test_link_bonding.c            | 205 ++++++++++++++++++++++++
 drivers/net/bonding/rte_eth_bond.h      |   5 +
 drivers/net/bonding/rte_eth_bond_args.c |   1 +
 drivers/net/bonding/rte_eth_bond_pmd.c  |  50 +++++-
 4 files changed, 258 insertions(+), 3 deletions(-)

diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 4d54706c21..254cacf5aa 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -2134,6 +2134,208 @@ test_roundrobin_verify_polling_member_link_status_change(void)
 	return remove_members_and_stop_bonding_device();
 }
 
+/** Direct mode Tests */
+
+static int
+test_direct_tx_burst_single_member(void)
+{
+	unsigned int i;
+	int member_port_id;
+	struct rte_eth_stats port_stats;
+	struct rte_mbuf *pkts[MAX_PKT_BURST];
+	const unsigned int burst_size = 20;
+
+	TEST_ASSERT(burst_size <= MAX_PKT_BURST,
+			"Burst size specified is greater than supported.");
+
+	TEST_ASSERT_SUCCESS(initialize_bonding_device_with_members(
+			BONDING_MODE_DIRECT, 0, 1, 1),
+			"Failed to initialize bonding device with single member");
+
+	/* Generate burst of test packets */
+	TEST_ASSERT_EQUAL(generate_test_burst(pkts, burst_size, 0, 1, 0, 0, 0),
+			(int) burst_size, "Failed to generate test burst");
+
+	member_port_id = test_params->member_port_ids[0];
+
+	/* Set the 'port' mbuf attribute to the appropriate value */
+	for (i = 0; i < burst_size; i++)
+		pkts[i]->port = member_port_id;
+
+	/* Send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(
+			test_params->bonding_port_id, 0, pkts, burst_size),
+			burst_size,
+			"TX burst failed");
+
+	/* Verify stats on bonding port */
+	rte_eth_stats_get(test_params->bonding_port_id, &port_stats);
+	TEST_ASSERT_EQUAL(port_stats.opackets, burst_size,
+			"Bonding port (%d) opackets value (%u) not as expected (%u)\n",
+			test_params->bonding_port_id, (unsigned int) port_stats.opackets,
+			burst_size);
+
+	/* Verify stats on member port */
+	rte_eth_stats_get(member_port_id, &port_stats);
+	TEST_ASSERT_EQUAL(port_stats.opackets, burst_size,
+			"Member port (%d) opackets value (%u) not as expected (%u)\n",
+			member_port_id, (unsigned int) port_stats.opackets,
+			burst_size);
+
+	/* Put all members down and try to transmit */
+	virtual_ethdev_simulate_link_status_interrupt(member_port_id, 0);
+
+	/* Try to send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonding_port_id, 0,
+			pkts, burst_size), 0,
+			"TX burst returned unexpected value");
+
+	/* Clean up and remove members from bonding device */
+	return remove_members_and_stop_bonding_device();
+}
+
+static int
+test_direct_tx_burst_multiple_members_single_tx(void)
+{
+	unsigned int i;
+	struct rte_eth_stats port_stats;
+	struct rte_mbuf *pkts[MAX_PKT_BURST];
+	const unsigned int num_members = 4;
+	const unsigned int burst_size = 20;
+	const int exp_member_port_id = test_params->member_port_ids[0];
+	int cmember_port_id;
+	unsigned int expected_pkts;
+
+
+	TEST_ASSERT(burst_size <= MAX_PKT_BURST,
+			"Burst size specified is greater than supported.");
+
+	TEST_ASSERT_SUCCESS(initialize_bonding_device_with_members(
+			BONDING_MODE_DIRECT, 0, num_members, 1),
+			"Failed to initialize bonding device with single member");
+
+	/* Generate burst of test packets */
+	TEST_ASSERT_EQUAL(generate_test_burst(
+			pkts, burst_size, 0, 1, 0, 0, 0),
+			(int) burst_size,
+			"Failed to generate test burst");
+
+
+	/* Set the 'port' mbuf attribute to the appropriate value */
+	for (i = 0; i < burst_size; i++)
+		pkts[i]->port = exp_member_port_id;
+
+	/* Send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(
+			test_params->bonding_port_id, 0, pkts, burst_size),
+			burst_size,
+			"TX burst failed");
+
+	/* Verify stats on bonding port */
+	rte_eth_stats_get(test_params->bonding_port_id, &port_stats);
+	TEST_ASSERT_EQUAL(port_stats.opackets, burst_size,
+			"Bonding port (%d) opackets value (%u) not as expected (%u)\n",
+			test_params->bonding_port_id, (unsigned int) port_stats.opackets,
+			burst_size);
+
+	/* Verify member ports tx stats */
+	for (i = 0; i < test_params->bonding_member_count; i++) {
+		cmember_port_id = test_params->member_port_ids[i];
+
+		if (cmember_port_id == exp_member_port_id)
+			expected_pkts = burst_size;
+		else
+			expected_pkts = 0;
+
+		rte_eth_stats_get(cmember_port_id, &port_stats);
+		TEST_ASSERT_EQUAL(port_stats.opackets,
+				(uint64_t)expected_pkts,
+				"Member Port (%d) opackets value (%u) not as expected (%u)\n",
+				test_params->bonding_port_id, (unsigned int)port_stats.opackets,
+				expected_pkts);
+	}
+
+	/* Put all members down and try and transmit */
+	for (i = 0; i < test_params->bonding_member_count; i++) {
+		virtual_ethdev_simulate_link_status_interrupt(
+				test_params->member_port_ids[i], 0);
+	}
+
+	/* Try to send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonding_port_id, 0,
+			pkts, burst_size), 0,
+			"TX burst returned unexpected value");
+
+	/* Clean up and remove members from bonding device */
+	return remove_members_and_stop_bonding_device();
+}
+
+static int
+test_direct_tx_burst_multiple_members_rr_fallback(void)
+{
+	unsigned int i;
+	struct rte_eth_stats port_stats;
+	struct rte_mbuf *pkts[MAX_PKT_BURST];
+	const unsigned int num_members = 4;
+	const unsigned int pkts_per_member = 20;
+	const unsigned int burst_size = num_members * pkts_per_member;
+
+
+	TEST_ASSERT(burst_size <= MAX_PKT_BURST,
+			"Burst size specified is greater than supported.");
+
+	TEST_ASSERT_SUCCESS(initialize_bonding_device_with_members(
+			BONDING_MODE_DIRECT, 0, num_members, 1),
+			"Failed to initialize bonding device with single member");
+
+	/* Generate burst of test packets */
+	TEST_ASSERT_EQUAL(generate_test_burst(
+			pkts, burst_size, 0, 1, 0, 0, 0),
+			(int) burst_size,
+			"Failed to generate test burst");
+
+
+	/* Set the 'port' mbuf attribute to the appropriate value */
+	for (i = 0; i < burst_size; i++)
+		pkts[i]->port = RTE_MAX_ETHPORTS;
+
+	/* Send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(
+			test_params->bonding_port_id, 0, pkts, burst_size),
+			burst_size,
+			"TX burst failed");
+
+	/* Verify stats on bonding port */
+	rte_eth_stats_get(test_params->bonding_port_id, &port_stats);
+	TEST_ASSERT_EQUAL(port_stats.opackets, burst_size,
+			"Bonding port (%d) opackets value (%u) not as expected (%u)\n",
+			test_params->bonding_port_id, (unsigned int) port_stats.opackets,
+			burst_size);
+
+	/* Verify member ports tx stats */
+	for (i = 0; i < test_params->bonding_member_count; i++) {
+		rte_eth_stats_get(test_params->member_port_ids[i], &port_stats);
+		TEST_ASSERT_EQUAL(port_stats.opackets,
+				(uint64_t)pkts_per_member,
+				"Member Port (%d) opackets value (%u) not as expected (%u)\n",
+				test_params->bonding_port_id, (unsigned int)port_stats.opackets,
+				pkts_per_member);
+	}
+
+	/* Put all members down and try and transmit */
+	for (i = 0; i < test_params->bonding_member_count; i++) {
+		virtual_ethdev_simulate_link_status_interrupt(
+				test_params->member_port_ids[i], 0);
+	}
+
+	/* Try to send burst on bonding port */
+	TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonding_port_id, 0,
+			pkts, burst_size), 0,
+			"TX burst returned unexpected value");
+
+	/* Clean up and remove members from bonding device */
+	return remove_members_and_stop_bonding_device();
+}
 
 /** Active Backup Mode Tests */
 
@@ -5174,6 +5376,9 @@ static struct unit_test_suite link_bonding_test_suite  = {
 		TEST_CASE(test_roundrobin_verify_mac_assignment),
 		TEST_CASE(test_roundrobin_verify_member_link_status_change_behaviour),
 		TEST_CASE(test_roundrobin_verify_polling_member_link_status_change),
+		TEST_CASE(test_direct_tx_burst_single_member),
+		TEST_CASE(test_direct_tx_burst_multiple_members_single_tx),
+		TEST_CASE(test_direct_tx_burst_multiple_members_rr_fallback),
 		TEST_CASE(test_activebackup_tx_burst),
 		TEST_CASE(test_activebackup_rx_burst),
 		TEST_CASE(test_activebackup_verify_promiscuous_enable_disable),
diff --git a/drivers/net/bonding/rte_eth_bond.h b/drivers/net/bonding/rte_eth_bond.h
index f10165f2c6..82d6644500 100644
--- a/drivers/net/bonding/rte_eth_bond.h
+++ b/drivers/net/bonding/rte_eth_bond.h
@@ -83,6 +83,11 @@ extern "C" {
  * information from it. When ARP reply from that peer is received, its MAC is
  * stored, one of member MACs assigned and ARP reply send to that peer.
  */
+#define BONDING_MODE_DIRECT	(7)
+/**< Direct bonding mode (Mode 7)
+ * In this mode, all packets are transmitted using the same member port on which
+ * it was received. This is decided based on the 'port' field of 'rte_mbuf'.
+ */
 
 /* Balance Mode Transmit Policies */
 #define BALANCE_XMIT_POLICY_LAYER2		(0)
diff --git a/drivers/net/bonding/rte_eth_bond_args.c b/drivers/net/bonding/rte_eth_bond_args.c
index bdec5d61d4..44e20568db 100644
--- a/drivers/net/bonding/rte_eth_bond_args.c
+++ b/drivers/net/bonding/rte_eth_bond_args.c
@@ -158,6 +158,7 @@ bond_ethdev_parse_member_mode_kvarg(const char *key __rte_unused,
 	case BONDING_MODE_8023AD:
 	case BONDING_MODE_TLB:
 	case BONDING_MODE_ALB:
+	case BONDING_MODE_DIRECT:
 		return 0;
 	default:
 		RTE_BOND_LOG(ERR, "Invalid member mode value (%s) specified", value);
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index c40d18d128..57ac5879c4 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -578,9 +578,14 @@ bond_ethdev_rx_burst_alb(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	return nb_recv_pkts;
 }
 
+enum tx_member_populate_mode {
+	RR_ONLY,
+	DIRECT_WITH_RR_FALLBACK,
+};
+
 static uint16_t
-bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
-		uint16_t nb_pkts)
+bond_ethdev_tx_burst_rr_generic(void *queue, struct rte_mbuf **bufs,
+		uint16_t nb_pkts, enum tx_member_populate_mode pop_mode)
 {
 	struct bond_dev_private *internals;
 	struct bond_tx_queue *bd_tx_q;
@@ -594,7 +599,7 @@ bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
 	uint16_t num_tx_total = 0, num_tx_member;
 
 	static int member_idx;
-	int i, cmember_idx = 0, tx_fail_total = 0;
+	int i, j, cmember_idx = 0, tx_fail_total = 0;
 
 	bd_tx_q = (struct bond_tx_queue *)queue;
 	internals = bd_tx_q->dev_private;
@@ -611,6 +616,17 @@ bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
 	/* Populate members mbuf with which packets are to be sent on it  */
 	for (i = 0; i < nb_pkts; i++) {
 		cmember_idx = (member_idx + i) % num_of_members;
+
+		if (pop_mode == DIRECT_WITH_RR_FALLBACK) {
+			/* Try to find correct member index */
+			for (j = 0; j < num_of_members; j++) {
+				if (bufs[i]->port == members[j]) {
+					cmember_idx = j;
+					break;
+				}
+			}
+		}
+
 		member_bufs[cmember_idx][(member_nb_pkts[cmember_idx])++] = bufs[i];
 	}
 
@@ -646,6 +662,20 @@ bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
 	return num_tx_total;
 }
 
+static uint16_t
+bond_ethdev_tx_burst_round_robin(void *queue, struct rte_mbuf **bufs,
+		uint16_t nb_pkts)
+{
+	return bond_ethdev_tx_burst_rr_generic(queue, bufs, nb_pkts, RR_ONLY);
+}
+
+static uint16_t
+bond_ethdev_tx_burst_direct(void *queue, struct rte_mbuf **bufs,
+		uint16_t nb_pkts)
+{
+	return bond_ethdev_tx_burst_rr_generic(queue, bufs, nb_pkts, DIRECT_WITH_RR_FALLBACK);
+}
+
 static uint16_t
 bond_ethdev_tx_burst_active_backup(void *queue,
 		struct rte_mbuf **bufs, uint16_t nb_pkts)
@@ -1551,6 +1581,7 @@ mac_address_members_update(struct rte_eth_dev *bonding_eth_dev)
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_DIRECT:
 		for (i = 0; i < internals->member_count; i++) {
 			if (rte_eth_dev_default_mac_addr_set(
 					internals->members[i].port_id,
@@ -1648,6 +1679,10 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, uint8_t mode)
 		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_alb;
 		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst_alb;
 		break;
+	case BONDING_MODE_DIRECT:
+		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_direct;
+		eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
+		break;
 	default:
 		return -1;
 	}
@@ -2581,6 +2616,7 @@ bond_ethdev_link_update(struct rte_eth_dev *ethdev, int wait_to_complete)
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_TLB:
 	case BONDING_MODE_ALB:
+	case BONDING_MODE_DIRECT:
 	default:
 		/**
 		 * In theses mode the maximum theoretical link speed is the sum
@@ -2678,6 +2714,7 @@ bond_ethdev_promiscuous_enable(struct rte_eth_dev *eth_dev)
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_DIRECT:
 	case BONDING_MODE_8023AD: {
 		unsigned int member_ok = 0;
 
@@ -2732,6 +2769,7 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_DIRECT:
 	case BONDING_MODE_8023AD: {
 		unsigned int member_ok = 0;
 
@@ -2790,6 +2828,7 @@ bond_ethdev_promiscuous_update(struct rte_eth_dev *dev)
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
 	case BONDING_MODE_8023AD:
+	case BONDING_MODE_DIRECT:
 		/* As promiscuous mode is propagated to all members for these
 		 * mode, no need to update for bonding device.
 		 */
@@ -2825,6 +2864,7 @@ bond_ethdev_allmulticast_enable(struct rte_eth_dev *eth_dev)
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_DIRECT:
 	case BONDING_MODE_8023AD: {
 		unsigned int member_ok = 0;
 
@@ -2879,6 +2919,7 @@ bond_ethdev_allmulticast_disable(struct rte_eth_dev *eth_dev)
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
+	case BONDING_MODE_DIRECT:
 	case BONDING_MODE_8023AD: {
 		unsigned int member_ok = 0;
 
@@ -2936,6 +2977,7 @@ bond_ethdev_allmulticast_update(struct rte_eth_dev *dev)
 	case BONDING_MODE_BALANCE:
 	case BONDING_MODE_BROADCAST:
 	case BONDING_MODE_8023AD:
+	case BONDING_MODE_DIRECT:
 		/* As allmulticast mode is propagated to all members for these
 		 * mode, no need to update for bonding device.
 		 */
@@ -3365,6 +3407,8 @@ bond_mode_name(uint8_t mode)
 		return "TLB";
 	case BONDING_MODE_ALB:
 		return "ALB";
+	case BONDING_MODE_DIRECT:
+		return "DIRECT";
 	default:
 		return "Unknown";
 	}
-- 
2.39.3


^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-07-10  5:17 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-12 12:27 [PATCH v2 1/2] net/bonding: introduce direct link bonding mode Kamil Vojanec
2024-04-12 12:27 ` [PATCH v2 2/2] doc/prog_guide: document " Kamil Vojanec
2024-07-05 11:27 ` [PATCH v2 1/2] net/bonding: introduce " Ferruh Yigit
2024-07-10  3:49 ` lihuisong (C)
2024-07-10  5:16   ` Kamil Vojanec

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).