DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
@ 2019-11-27 13:42 Thomas Monjalon
  2019-11-27 14:05 ` Ferruh Yigit
  2019-11-27 14:31 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
  0 siblings, 2 replies; 10+ messages in thread
From: Thomas Monjalon @ 2019-11-27 13:42 UTC (permalink / raw)
  To: Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko,
	Jasvinder Singh, Cristian Dumitrescu, Ferruh Yigit,
	Andrew Rybchenko
  Cc: david.marchand, dev, stable, Raslan Darawsheh

A buffer overflow happens in testpmd with some drivers
since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.

The advertised capabilities of mlx4, mlx5 and softnic
for the number of queues were the maximum number: UINT16_MAX.
They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
that applications expect to be respected.

The limitation is applied in above drivers having no limitation,
and at ethdev level (function rte_eth_dev_info_get), in order
to force the configured limit for all drivers.

Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Fixes: e60fbd5b24fc ("mlx5: add device configure/start/stop")
Fixes: cc6d421574fe ("net/softnic: add softnic PMD")
Fixes: 9e6b36c34ce9 ("app/testpmd: reduce memory consumption")
Cc: stable@dpdk.org

Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 drivers/net/mlx4/mlx4_ethdev.c        | 4 +---
 drivers/net/mlx5/mlx5_ethdev.c        | 4 +---
 drivers/net/softnic/rte_eth_softnic.c | 4 ++--
 lib/librte_ethdev/rte_ethdev.c        | 6 ++++++
 4 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/mlx4/mlx4_ethdev.c b/drivers/net/mlx4/mlx4_ethdev.c
index dfb24c22d0..a18a66cb4a 100644
--- a/drivers/net/mlx4/mlx4_ethdev.c
+++ b/drivers/net/mlx4/mlx4_ethdev.c
@@ -646,9 +646,7 @@ mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 	 */
 	max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
 	       priv->device_attr.max_qp : priv->device_attr.max_cq);
-	/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
-	if (max >= 65535)
-		max = 65535;
+	max = RTE_MIN(max, (unsigned int)RTE_MAX_QUEUES_PER_PORT);
 	info->max_rx_queues = max;
 	info->max_tx_queues = max;
 	info->max_mac_addrs = RTE_DIM(priv->mac);
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index d80ae458bc..045dae6b5a 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -617,9 +617,7 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
 	 */
 	max = RTE_MIN(priv->sh->device_attr.orig_attr.max_cq,
 		      priv->sh->device_attr.orig_attr.max_qp);
-	/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
-	if (max >= 65535)
-		max = 65535;
+	max = RTE_MIN(max, (unsigned int)RTE_MAX_QUEUES_PER_PORT);
 	info->max_rx_queues = max;
 	info->max_tx_queues = max;
 	info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
diff --git a/drivers/net/softnic/rte_eth_softnic.c b/drivers/net/softnic/rte_eth_softnic.c
index 11723778fd..1065cbf847 100644
--- a/drivers/net/softnic/rte_eth_softnic.c
+++ b/drivers/net/softnic/rte_eth_softnic.c
@@ -91,8 +91,8 @@ pmd_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
 	struct rte_eth_dev_info *dev_info)
 {
 	dev_info->max_rx_pktlen = UINT32_MAX;
-	dev_info->max_rx_queues = UINT16_MAX;
-	dev_info->max_tx_queues = UINT16_MAX;
+	dev_info->max_rx_queues = RTE_MAX_QUEUES_PER_PORT;
+	dev_info->max_tx_queues = RTE_MAX_QUEUES_PER_PORT;
 
 	return 0;
 }
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 8d2ce31a81..6e9cb243ea 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2986,6 +2986,12 @@ rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
 		return eth_err(port_id, diag);
 	}
 
+	/* Maximum number of queues should be <= RTE_MAX_QUEUES_PER_PORT */
+	dev_info->max_rx_queues = RTE_MIN(dev_info->max_rx_queues,
+			RTE_MAX_QUEUES_PER_PORT);
+	dev_info->max_tx_queues = RTE_MIN(dev_info->max_tx_queues,
+			RTE_MAX_QUEUES_PER_PORT);
+
 	dev_info->driver_name = dev->device->driver->name;
 	dev_info->nb_rx_queues = dev->data->nb_rx_queues;
 	dev_info->nb_tx_queues = dev->data->nb_tx_queues;
-- 
2.23.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 13:42 [dpdk-dev] [PATCH] ethdev: limit maximum number of queues Thomas Monjalon
@ 2019-11-27 14:05 ` Ferruh Yigit
  2019-11-27 14:07   ` David Marchand
  2019-11-27 14:31 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
  1 sibling, 1 reply; 10+ messages in thread
From: Ferruh Yigit @ 2019-11-27 14:05 UTC (permalink / raw)
  To: Thomas Monjalon, Matan Azrad, Shahaf Shuler,
	Viacheslav Ovsiienko, Jasvinder Singh, Cristian Dumitrescu,
	Andrew Rybchenko
  Cc: david.marchand, dev, stable, Raslan Darawsheh

On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
> A buffer overflow happens in testpmd with some drivers
> since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
> 
> The advertised capabilities of mlx4, mlx5 and softnic
> for the number of queues were the maximum number: UINT16_MAX.
> They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> that applications expect to be respected.
> 
> The limitation is applied in above drivers having no limitation,
> and at ethdev level (function rte_eth_dev_info_get), in order
> to force the configured limit for all drivers.

The limit is not device limit, should we reflect it into PMDs?
Why not keep the limit only in the ethdev?

> 
> Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
> Fixes: e60fbd5b24fc ("mlx5: add device configure/start/stop")
> Fixes: cc6d421574fe ("net/softnic: add softnic PMD")
> Fixes: 9e6b36c34ce9 ("app/testpmd: reduce memory consumption")
> Cc: stable@dpdk.org
> 
> Reported-by: Raslan Darawsheh <rasland@mellanox.com>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> ---
>  drivers/net/mlx4/mlx4_ethdev.c        | 4 +---
>  drivers/net/mlx5/mlx5_ethdev.c        | 4 +---
>  drivers/net/softnic/rte_eth_softnic.c | 4 ++--
>  lib/librte_ethdev/rte_ethdev.c        | 6 ++++++
>  4 files changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/mlx4/mlx4_ethdev.c b/drivers/net/mlx4/mlx4_ethdev.c
> index dfb24c22d0..a18a66cb4a 100644
> --- a/drivers/net/mlx4/mlx4_ethdev.c
> +++ b/drivers/net/mlx4/mlx4_ethdev.c
> @@ -646,9 +646,7 @@ mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
>  	 */
>  	max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
>  	       priv->device_attr.max_qp : priv->device_attr.max_cq);
> -	/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
> -	if (max >= 65535)
> -		max = 65535;
> +	max = RTE_MIN(max, (unsigned int)RTE_MAX_QUEUES_PER_PORT);
>  	info->max_rx_queues = max;
>  	info->max_tx_queues = max;
>  	info->max_mac_addrs = RTE_DIM(priv->mac);
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index d80ae458bc..045dae6b5a 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -617,9 +617,7 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
>  	 */
>  	max = RTE_MIN(priv->sh->device_attr.orig_attr.max_cq,
>  		      priv->sh->device_attr.orig_attr.max_qp);
> -	/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
> -	if (max >= 65535)
> -		max = 65535;
> +	max = RTE_MIN(max, (unsigned int)RTE_MAX_QUEUES_PER_PORT);
>  	info->max_rx_queues = max;
>  	info->max_tx_queues = max;
>  	info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
> diff --git a/drivers/net/softnic/rte_eth_softnic.c b/drivers/net/softnic/rte_eth_softnic.c
> index 11723778fd..1065cbf847 100644
> --- a/drivers/net/softnic/rte_eth_softnic.c
> +++ b/drivers/net/softnic/rte_eth_softnic.c
> @@ -91,8 +91,8 @@ pmd_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
>  	struct rte_eth_dev_info *dev_info)
>  {
>  	dev_info->max_rx_pktlen = UINT32_MAX;
> -	dev_info->max_rx_queues = UINT16_MAX;
> -	dev_info->max_tx_queues = UINT16_MAX;
> +	dev_info->max_rx_queues = RTE_MAX_QUEUES_PER_PORT;
> +	dev_info->max_tx_queues = RTE_MAX_QUEUES_PER_PORT;
>  
>  	return 0;
>  }
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 8d2ce31a81..6e9cb243ea 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -2986,6 +2986,12 @@ rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
>  		return eth_err(port_id, diag);
>  	}
>  
> +	/* Maximum number of queues should be <= RTE_MAX_QUEUES_PER_PORT */
> +	dev_info->max_rx_queues = RTE_MIN(dev_info->max_rx_queues,
> +			RTE_MAX_QUEUES_PER_PORT);
> +	dev_info->max_tx_queues = RTE_MIN(dev_info->max_tx_queues,
> +			RTE_MAX_QUEUES_PER_PORT);
> +
>  	dev_info->driver_name = dev->device->driver->name;
>  	dev_info->nb_rx_queues = dev->data->nb_rx_queues;
>  	dev_info->nb_tx_queues = dev->data->nb_tx_queues;
> 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 14:05 ` Ferruh Yigit
@ 2019-11-27 14:07   ` David Marchand
  2019-11-27 14:11     ` Thomas Monjalon
  0 siblings, 1 reply; 10+ messages in thread
From: David Marchand @ 2019-11-27 14:07 UTC (permalink / raw)
  To: Ferruh Yigit
  Cc: Thomas Monjalon, Matan Azrad, Shahaf Shuler,
	Viacheslav Ovsiienko, Jasvinder Singh, Cristian Dumitrescu,
	Andrew Rybchenko, dev, dpdk stable, Raslan Darawsheh

On Wed, Nov 27, 2019 at 3:06 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>
> On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
> > A buffer overflow happens in testpmd with some drivers
> > since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
> >
> > The advertised capabilities of mlx4, mlx5 and softnic
> > for the number of queues were the maximum number: UINT16_MAX.
> > They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> > that applications expect to be respected.
> >
> > The limitation is applied in above drivers having no limitation,
> > and at ethdev level (function rte_eth_dev_info_get), in order
> > to force the configured limit for all drivers.
>
> The limit is not device limit, should we reflect it into PMDs?
> Why not keep the limit only in the ethdev?

+1.


-- 
David Marchand


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 14:07   ` David Marchand
@ 2019-11-27 14:11     ` Thomas Monjalon
  2019-11-27 14:14       ` Ferruh Yigit
  2019-11-27 14:30       ` David Marchand
  0 siblings, 2 replies; 10+ messages in thread
From: Thomas Monjalon @ 2019-11-27 14:11 UTC (permalink / raw)
  To: David Marchand, Ferruh Yigit
  Cc: Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko,
	Jasvinder Singh, Cristian Dumitrescu, Andrew Rybchenko, dev,
	dpdk stable, Raslan Darawsheh

27/11/2019 15:07, David Marchand:
> On Wed, Nov 27, 2019 at 3:06 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
> >
> > On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
> > > A buffer overflow happens in testpmd with some drivers
> > > since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
> > >
> > > The advertised capabilities of mlx4, mlx5 and softnic
> > > for the number of queues were the maximum number: UINT16_MAX.
> > > They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> > > that applications expect to be respected.
> > >
> > > The limitation is applied in above drivers having no limitation,
> > > and at ethdev level (function rte_eth_dev_info_get), in order
> > > to force the configured limit for all drivers.
> >
> > The limit is not device limit, should we reflect it into PMDs?
> > Why not keep the limit only in the ethdev?
> 
> +1.

Yes ethdev is enough.
I thought it would be better to document the limit in the PMDs as well,
instead of keeping gigantic max.

I can change if you feel strong about it.




^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 14:11     ` Thomas Monjalon
@ 2019-11-27 14:14       ` Ferruh Yigit
  2019-11-27 14:15         ` Ferruh Yigit
  2019-11-27 14:30       ` David Marchand
  1 sibling, 1 reply; 10+ messages in thread
From: Ferruh Yigit @ 2019-11-27 14:14 UTC (permalink / raw)
  To: Thomas Monjalon, David Marchand
  Cc: Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko,
	Jasvinder Singh, Cristian Dumitrescu, Andrew Rybchenko, dev,
	dpdk stable, Raslan Darawsheh

On 11/27/2019 2:11 PM, Thomas Monjalon wrote:
> 27/11/2019 15:07, David Marchand:
>> On Wed, Nov 27, 2019 at 3:06 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>>>
>>> On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
>>>> A buffer overflow happens in testpmd with some drivers
>>>> since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
>>>>
>>>> The advertised capabilities of mlx4, mlx5 and softnic
>>>> for the number of queues were the maximum number: UINT16_MAX.
>>>> They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
>>>> that applications expect to be respected.
>>>>
>>>> The limitation is applied in above drivers having no limitation,
>>>> and at ethdev level (function rte_eth_dev_info_get), in order
>>>> to force the configured limit for all drivers.
>>>
>>> The limit is not device limit, should we reflect it into PMDs?
>>> Why not keep the limit only in the ethdev?
>>
>> +1.
> 
> Yes ethdev is enough.
> I thought it would be better to document the limit in the PMDs as well,
> instead of keeping gigantic max.
> 
> I can change if you feel strong about it.
> 

No strong opinion, but not sure if we should document ethdev limitation in
ethdev, for me only ethdev limit looks good.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 14:14       ` Ferruh Yigit
@ 2019-11-27 14:15         ` Ferruh Yigit
  0 siblings, 0 replies; 10+ messages in thread
From: Ferruh Yigit @ 2019-11-27 14:15 UTC (permalink / raw)
  To: Thomas Monjalon, David Marchand
  Cc: Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko,
	Jasvinder Singh, Cristian Dumitrescu, Andrew Rybchenko, dev,
	dpdk stable, Raslan Darawsheh

On 11/27/2019 2:14 PM, Ferruh Yigit wrote:
> On 11/27/2019 2:11 PM, Thomas Monjalon wrote:
>> 27/11/2019 15:07, David Marchand:
>>> On Wed, Nov 27, 2019 at 3:06 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>>>>
>>>> On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
>>>>> A buffer overflow happens in testpmd with some drivers
>>>>> since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
>>>>>
>>>>> The advertised capabilities of mlx4, mlx5 and softnic
>>>>> for the number of queues were the maximum number: UINT16_MAX.
>>>>> They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
>>>>> that applications expect to be respected.
>>>>>
>>>>> The limitation is applied in above drivers having no limitation,
>>>>> and at ethdev level (function rte_eth_dev_info_get), in order
>>>>> to force the configured limit for all drivers.
>>>>
>>>> The limit is not device limit, should we reflect it into PMDs?
>>>> Why not keep the limit only in the ethdev?
>>>
>>> +1.
>>
>> Yes ethdev is enough.
>> I thought it would be better to document the limit in the PMDs as well,
>> instead of keeping gigantic max.
>>
>> I can change if you feel strong about it.
>>
> 
> No strong opinion, but not sure if we should document ethdev limitation in
> ethdev, for me only ethdev limit looks good.
> 

... not sure if we should document ethdev limitation in *PMD* ...

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH] ethdev: limit maximum number of queues
  2019-11-27 14:11     ` Thomas Monjalon
  2019-11-27 14:14       ` Ferruh Yigit
@ 2019-11-27 14:30       ` David Marchand
  1 sibling, 0 replies; 10+ messages in thread
From: David Marchand @ 2019-11-27 14:30 UTC (permalink / raw)
  To: Thomas Monjalon
  Cc: Ferruh Yigit, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko,
	Jasvinder Singh, Cristian Dumitrescu, Andrew Rybchenko, dev,
	dpdk stable, Raslan Darawsheh

On Wed, Nov 27, 2019 at 3:11 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>
> 27/11/2019 15:07, David Marchand:
> > On Wed, Nov 27, 2019 at 3:06 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
> > >
> > > On 11/27/2019 1:42 PM, Thomas Monjalon wrote:
> > > > A buffer overflow happens in testpmd with some drivers
> > > > since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
> > > >
> > > > The advertised capabilities of mlx4, mlx5 and softnic
> > > > for the number of queues were the maximum number: UINT16_MAX.
> > > > They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> > > > that applications expect to be respected.
> > > >
> > > > The limitation is applied in above drivers having no limitation,
> > > > and at ethdev level (function rte_eth_dev_info_get), in order
> > > > to force the configured limit for all drivers.
> > >
> > > The limit is not device limit, should we reflect it into PMDs?
> > > Why not keep the limit only in the ethdev?
> >
> > +1.
>
> Yes ethdev is enough.
> I thought it would be better to document the limit in the PMDs as well,
> instead of keeping gigantic max.

This gigantic value also documents that the driver has no limitation itself.
The limitation is in the ethdev layer.

Certainly a bit far-fetched but, with the mlx5 driver as a .so, you
would prefer the driver not to announce a limitation from ethdev if
you recompile ethdev.

--
David Marchand


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [dpdk-dev] [PATCH v2] ethdev: limit maximum number of queues
  2019-11-27 13:42 [dpdk-dev] [PATCH] ethdev: limit maximum number of queues Thomas Monjalon
  2019-11-27 14:05 ` Ferruh Yigit
@ 2019-11-27 14:31 ` Thomas Monjalon
  2019-11-27 14:47   ` David Marchand
  1 sibling, 1 reply; 10+ messages in thread
From: Thomas Monjalon @ 2019-11-27 14:31 UTC (permalink / raw)
  To: Ferruh Yigit, Andrew Rybchenko
  Cc: david.marchand, dev, stable, Raslan Darawsheh

A buffer overflow happens in testpmd with some drivers
since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.

The advertised capabilities of mlx4, mlx5 and softnic
for the number of queues were the maximum number: UINT16_MAX.
They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
that applications expect to be respected.

The limitation is applied at ethdev level (function rte_eth_dev_info_get),
in order to force the configured limit for all drivers.

Fixes: 14b53e27b30e ("ethdev: fix crash with multiprocess")
Cc: stable@dpdk.org

Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
v2: remove changes in drivers, keep limit only in ethdev
---
 lib/librte_ethdev/rte_ethdev.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 8d2ce31a81..6e9cb243ea 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2986,6 +2986,12 @@ rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
 		return eth_err(port_id, diag);
 	}
 
+	/* Maximum number of queues should be <= RTE_MAX_QUEUES_PER_PORT */
+	dev_info->max_rx_queues = RTE_MIN(dev_info->max_rx_queues,
+			RTE_MAX_QUEUES_PER_PORT);
+	dev_info->max_tx_queues = RTE_MIN(dev_info->max_tx_queues,
+			RTE_MAX_QUEUES_PER_PORT);
+
 	dev_info->driver_name = dev->device->driver->name;
 	dev_info->nb_rx_queues = dev->data->nb_rx_queues;
 	dev_info->nb_tx_queues = dev->data->nb_tx_queues;
-- 
2.23.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [PATCH v2] ethdev: limit maximum number of queues
  2019-11-27 14:31 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
@ 2019-11-27 14:47   ` David Marchand
  2019-11-27 15:09     ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
  0 siblings, 1 reply; 10+ messages in thread
From: David Marchand @ 2019-11-27 14:47 UTC (permalink / raw)
  To: Thomas Monjalon
  Cc: Ferruh Yigit, Andrew Rybchenko, dev, dpdk stable, Raslan Darawsheh

On Wed, Nov 27, 2019 at 3:31 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>
> A buffer overflow happens in testpmd with some drivers
> since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
>
> The advertised capabilities of mlx4, mlx5 and softnic
> for the number of queues were the maximum number: UINT16_MAX.
> They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> that applications expect to be respected.
>
> The limitation is applied at ethdev level (function rte_eth_dev_info_get),
> in order to force the configured limit for all drivers.
>
> Fixes: 14b53e27b30e ("ethdev: fix crash with multiprocess")
> Cc: stable@dpdk.org
>
> Reported-by: Raslan Darawsheh <rasland@mellanox.com>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

Reviewed-by: David Marchand <david.marchand@redhat.com>


-- 
David Marchand


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-dev] [dpdk-stable] [PATCH v2] ethdev: limit maximum number of queues
  2019-11-27 14:47   ` David Marchand
@ 2019-11-27 15:09     ` Thomas Monjalon
  0 siblings, 0 replies; 10+ messages in thread
From: Thomas Monjalon @ 2019-11-27 15:09 UTC (permalink / raw)
  To: dev
  Cc: stable, David Marchand, Ferruh Yigit, Andrew Rybchenko, Raslan Darawsheh

27/11/2019 15:47, David Marchand:
> On Wed, Nov 27, 2019 at 3:31 PM Thomas Monjalon <thomas@monjalon.net> wrote:
> >
> > A buffer overflow happens in testpmd with some drivers
> > since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
> >
> > The advertised capabilities of mlx4, mlx5 and softnic
> > for the number of queues were the maximum number: UINT16_MAX.
> > They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
> > that applications expect to be respected.
> >
> > The limitation is applied at ethdev level (function rte_eth_dev_info_get),
> > in order to force the configured limit for all drivers.
> >
> > Fixes: 14b53e27b30e ("ethdev: fix crash with multiprocess")
> > Cc: stable@dpdk.org
> >
> > Reported-by: Raslan Darawsheh <rasland@mellanox.com>
> > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> > Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
> 
> Reviewed-by: David Marchand <david.marchand@redhat.com>

Applied




^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2019-11-27 15:09 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-27 13:42 [dpdk-dev] [PATCH] ethdev: limit maximum number of queues Thomas Monjalon
2019-11-27 14:05 ` Ferruh Yigit
2019-11-27 14:07   ` David Marchand
2019-11-27 14:11     ` Thomas Monjalon
2019-11-27 14:14       ` Ferruh Yigit
2019-11-27 14:15         ` Ferruh Yigit
2019-11-27 14:30       ` David Marchand
2019-11-27 14:31 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
2019-11-27 14:47   ` David Marchand
2019-11-27 15:09     ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).