DPDK patches and discussions
 help / color / mirror / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <chandu@amd.com>, <dev@dpdk.org>
Cc: <Ravi1.Kumar@amd.com>, <Amaranath.Somalapuram@amd.com>
Subject: Re: [dpdk-dev] [PATCH v1] net/axgbe: add RSS reta/hash query and update
Date: Tue, 24 Mar 2020 12:54:48 +0300	[thread overview]
Message-ID: <7eb245ed-5920-5e05-cc1c-63a5e92c8a04@solarflare.com> (raw)
In-Reply-To: <20200320112914.18620-1-chandu@amd.com>

On 3/20/20 2:29 PM, chandu@amd.com wrote:
> From: Chandu Babu N <chandu@amd.com>
> 
> add support for RSS ethdev_ops reta_update, reta_query
> rss_hash_update, rss_hash_conf_get

The patch should update doc/guides/nics/features/axgbe.ini to
advertise corresponding features.

> 
> Signed-off-by: Chandu Babu N <chandu@amd.com>
> ---
>  drivers/net/axgbe/axgbe_dev.c    |   5 +-
>  drivers/net/axgbe/axgbe_ethdev.c | 146 +++++++++++++++++++++++++++++++
>  drivers/net/axgbe/axgbe_ethdev.h |   3 +
>  3 files changed, 152 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c
> index 5f0f19592..af62eae3b 100644
> --- a/drivers/net/axgbe/axgbe_dev.c
> +++ b/drivers/net/axgbe/axgbe_dev.c
> @@ -614,7 +614,7 @@ static int axgbe_write_rss_reg(struct axgbe_port *pdata, unsigned int type,
>  	return -EBUSY;
>  }
>  
> -static int axgbe_write_rss_hash_key(struct axgbe_port *pdata)
> +int axgbe_write_rss_hash_key(struct axgbe_port *pdata)
>  {
>  	struct rte_eth_rss_conf *rss_conf;
>  	unsigned int key_regs = sizeof(pdata->rss_key) / sizeof(u32);
> @@ -638,7 +638,7 @@ static int axgbe_write_rss_hash_key(struct axgbe_port *pdata)
>  	return 0;
>  }
>  
> -static int axgbe_write_rss_lookup_table(struct axgbe_port *pdata)
> +int axgbe_write_rss_lookup_table(struct axgbe_port *pdata)
>  {
>  	unsigned int i;
>  	int ret;
> @@ -683,6 +683,7 @@ static void axgbe_rss_options(struct axgbe_port *pdata)
>  	uint64_t rss_hf;
>  
>  	rss_conf = &pdata->eth_dev->data->dev_conf.rx_adv_conf.rss_conf;
> +	pdata->rss_hf = rss_conf->rss_hf;
>  	rss_hf = rss_conf->rss_hf;
>  
>  	if (rss_hf & (ETH_RSS_IPV4 | ETH_RSS_IPV6))
> diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
> index 867058845..f42bb7a0d 100644
> --- a/drivers/net/axgbe/axgbe_ethdev.c
> +++ b/drivers/net/axgbe/axgbe_ethdev.c
> @@ -60,6 +60,18 @@ axgbe_dev_xstats_get_names_by_id(struct rte_eth_dev *dev,
>  				 const uint64_t *ids,
>  				 unsigned int size);
>  static int axgbe_dev_xstats_reset(struct rte_eth_dev *dev);
> +static int
> +axgbe_dev_rss_reta_update(struct rte_eth_dev *dev,
> +			  struct rte_eth_rss_reta_entry64 *reta_conf,
> +			  uint16_t reta_size);
> +static int
> +axgbe_dev_rss_reta_query(struct rte_eth_dev *dev,
> +			 struct rte_eth_rss_reta_entry64 *reta_conf,
> +			 uint16_t reta_size);

It looks like style is inconsistent for above to declarations
vs declarations around.

> +static int axgbe_dev_rss_hash_update(struct rte_eth_dev *dev,
> +				     struct rte_eth_rss_conf *rss_conf);
> +static int axgbe_dev_rss_hash_conf_get(struct rte_eth_dev *dev,
> +				       struct rte_eth_rss_conf *rss_conf);
>  static int  axgbe_dev_info_get(struct rte_eth_dev *dev,
>  			       struct rte_eth_dev_info *dev_info);
>  static int axgbe_flow_ctrl_get(struct rte_eth_dev *dev,
> @@ -201,6 +213,10 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
>  	.xstats_get_names     = axgbe_dev_xstats_get_names,
>  	.xstats_get_names_by_id = axgbe_dev_xstats_get_names_by_id,
>  	.xstats_get_by_id     = axgbe_dev_xstats_get_by_id,
> +	.reta_update          = axgbe_dev_rss_reta_update,
> +	.reta_query           = axgbe_dev_rss_reta_query,
> +	.rss_hash_update      = axgbe_dev_rss_hash_update,
> +	.rss_hash_conf_get    = axgbe_dev_rss_hash_conf_get,
>  	.dev_infos_get        = axgbe_dev_info_get,
>  	.rx_queue_setup       = axgbe_dev_rx_queue_setup,
>  	.rx_queue_release     = axgbe_dev_rx_queue_release,
> @@ -450,6 +466,136 @@ axgbe_dev_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
>  	return 0;
>  }
>  
> +static int
> +axgbe_dev_rss_reta_update(struct rte_eth_dev *dev,
> +			  struct rte_eth_rss_reta_entry64 *reta_conf,
> +			  uint16_t reta_size)
> +{
> +	struct axgbe_port *pdata = dev->data->dev_private;
> +	unsigned int i, idx, shift;
> +	int ret;
> +
> +	if (!pdata->rss_enable) {
> +		PMD_DRV_LOG(ERR, "RSS not enabled\n");
> +		return -ENOTSUP;
> +	}
> +
> +	if (!reta_size || reta_size > AXGBE_RSS_MAX_TABLE_SIZE) {

DPDK style guide [1] says to use comparison to 0 instead of !

[1]
https://doc.dpdk.org/guides/contributing/coding_style.html#c-statement-style-and-conventions

> +		PMD_DRV_LOG(ERR, "reta_size %d is not supported\n", reta_size);
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < reta_size; i++) {
> +		idx = i / RTE_RETA_GROUP_SIZE;
> +		shift = i % RTE_RETA_GROUP_SIZE;
> +		if ((reta_conf[idx].mask & (1ULL << shift)) == 0)
> +			continue;
> +		pdata->rss_table[i] = reta_conf[idx].reta[shift];
> +	}
> +
> +	/* Program the lookup table */
> +	ret = axgbe_write_rss_lookup_table(pdata);
> +	return ret;
> +}
> +
> +static int
> +axgbe_dev_rss_reta_query(struct rte_eth_dev *dev,
> +			 struct rte_eth_rss_reta_entry64 *reta_conf,
> +			 uint16_t reta_size)
> +{
> +	struct axgbe_port *pdata = dev->data->dev_private;
> +	unsigned int i, idx, shift;
> +
> +	if (!pdata->rss_enable) {
> +		PMD_DRV_LOG(ERR, "RSS not enabled\n");
> +		return -ENOTSUP;
> +	}
> +
> +	if (!reta_size || reta_size > AXGBE_RSS_MAX_TABLE_SIZE) {

Here too

> +		PMD_DRV_LOG(ERR, "reta_size %d is not supported\n", reta_size);
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < reta_size; i++) {
> +		idx = i / RTE_RETA_GROUP_SIZE;
> +		shift = i % RTE_RETA_GROUP_SIZE;
> +		if ((reta_conf[idx].mask & (1ULL << shift)) == 0)
> +			continue;
> +		reta_conf[idx].reta[shift] = pdata->rss_table[i];
> +	}
> +	return 0;
> +}
> +
> +static int
> +axgbe_dev_rss_hash_update(struct rte_eth_dev *dev,
> +			  struct rte_eth_rss_conf *rss_conf)
> +{
> +	struct axgbe_port *pdata = dev->data->dev_private;
> +	int ret;
> +
> +	if (!pdata->rss_enable) {
> +		PMD_DRV_LOG(ERR, "RSS not enabled\n");
> +		return -ENOTSUP;
> +	}
> +
> +	if (!rss_conf) {

Here too. It should comparison vs NULL.

> +		PMD_DRV_LOG(ERR, "rss_conf value isn't valid\n");
> +		return -EINVAL;
> +	}
> +
> +	if (rss_conf->rss_key &&

and here

> +	    rss_conf->rss_key_len == AXGBE_RSS_HASH_KEY_SIZE) {
> +		rte_memcpy(pdata->rss_key, rss_conf->rss_key,
> +		       AXGBE_RSS_HASH_KEY_SIZE);
> +		/* Program the hash key */
> +		ret = axgbe_write_rss_hash_key(pdata);
> +		if (ret)

and here

> +			return ret;
> +	}
> +
> +	pdata->rss_hf = rss_conf->rss_hf & AXGBE_RSS_OFFLOAD;
> +
> +	if (pdata->rss_hf & (ETH_RSS_IPV4 | ETH_RSS_IPV6))
> +		AXGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, IP2TE, 1);
> +	if (pdata->rss_hf &
> +	    (ETH_RSS_NONFRAG_IPV4_TCP | ETH_RSS_NONFRAG_IPV6_TCP))
> +		AXGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, TCP4TE, 1);
> +	if (pdata->rss_hf &
> +	    (ETH_RSS_NONFRAG_IPV4_UDP | ETH_RSS_NONFRAG_IPV6_UDP))
> +		AXGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);
> +
> +	/* Set the RSS options */
> +	AXGMAC_IOWRITE(pdata, MAC_RSSCR, pdata->rss_options);
> +
> +	return 0;
> +}
> +
> +static int
> +axgbe_dev_rss_hash_conf_get(struct rte_eth_dev *dev,
> +			    struct rte_eth_rss_conf *rss_conf)
> +{
> +	struct axgbe_port *pdata = dev->data->dev_private;
> +
> +	if (!pdata->rss_enable) {
> +		PMD_DRV_LOG(ERR, "RSS not enabled\n");
> +		return -ENOTSUP;
> +	}
> +
> +	if (!rss_conf) {

and here

> +		PMD_DRV_LOG(ERR, "rss_conf value isn't valid\n");
> +		return -EINVAL;
> +	}
> +
> +	if (rss_conf->rss_key &&

and here

> +	    rss_conf->rss_key_len <= AXGBE_RSS_HASH_KEY_SIZE) {
> +		rte_memcpy(rss_conf->rss_key, pdata->rss_key,
> +		       AXGBE_RSS_HASH_KEY_SIZE);
> +	}
> +	rss_conf->rss_key_len = AXGBE_RSS_HASH_KEY_SIZE;
> +	rss_conf->rss_hf = pdata->rss_hf;
> +	return 0;
> +}
> +
>  static void
>  axgbe_dev_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
>  {
> diff --git a/drivers/net/axgbe/axgbe_ethdev.h b/drivers/net/axgbe/axgbe_ethdev.h
> index f10ec4a40..cedce5af6 100644
> --- a/drivers/net/axgbe/axgbe_ethdev.h
> +++ b/drivers/net/axgbe/axgbe_ethdev.h
> @@ -594,6 +594,7 @@ struct axgbe_port {
>  	uint32_t rss_table[AXGBE_RSS_MAX_TABLE_SIZE];
>  	uint32_t rss_options;
>  	int rss_enable;
> +	uint64_t rss_hf;
>  
>  	/* Hardware features of the device */
>  	struct axgbe_hw_features hw_feat;
> @@ -653,5 +654,7 @@ void axgbe_init_function_ptrs_i2c(struct axgbe_i2c_if *i2c_if);
>  void axgbe_set_mac_addn_addr(struct axgbe_port *pdata, u8 *addr,
>  			     uint32_t index);
>  void axgbe_set_mac_hash_table(struct axgbe_port *pdata, u8 *addr, bool add);
> +int axgbe_write_rss_lookup_table(struct axgbe_port *pdata);
> +int axgbe_write_rss_hash_key(struct axgbe_port *pdata);
>  
>  #endif /* RTE_ETH_AXGBE_H_ */
> 


  parent reply	other threads:[~2020-03-24  9:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 11:29 chandu
2020-03-21 11:40 ` Kumar, Ravi1
2020-03-24  9:54 ` Andrew Rybchenko [this message]
2020-03-24 10:17   ` Namburu, Chandu-babu
2020-03-24 10:24     ` Andrew Rybchenko
2020-03-25  3:25       ` Namburu, Chandu-babu
2020-05-29 11:49 ` [dpdk-dev] [PATCH v2] " chandu
2020-06-04  5:27   ` Somalapuram, Amaranath
2020-06-04 12:06     ` Ferruh Yigit
2020-06-05 14:49     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7eb245ed-5920-5e05-cc1c-63a5e92c8a04@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=Amaranath.Somalapuram@amd.com \
    --cc=Ravi1.Kumar@amd.com \
    --cc=chandu@amd.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).