Re: [dpdk-dev] [PATCH 1/3 v7] i40e: support floating VEB config

["Xu, Qian Q" <qian.q.xu@intel.com>]

Tested-by: Qian Xu <qian.q.xu@intel.com>

- Test Commit: 8f6f24342281f59de0df7bd976a32f714d39b9a9
- OS/Kernel: Fedora 21/4.1.13
- GCC: gcc (GCC) 4.9.2 20141101 (Red Hat 4.9.2-1)
- CPU: Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10
- NIC: Intel(R) Ethernet Controller X710 for 10GbE SFP+
- Total 2 cases, 2 passed, 0 failed. 

Test Case5: Floating VEB Inter-VM VF-VF 
=======================================

Summary: DPDK PF, then create 2VFs and 2VMs, assign one VF to one VM, say VF1 in VM1, VF2 in VM2, and make PF link down(the cable can be pluged out). VFs in VMs are running dpdk testpmd, send traffic to VF1, and set the packet's DEST MAC to VF2, check if VF2 can receive the packets. Check Inter-VM VF-VF MAC switch when PF is link down as well as up.

Details: 

1. Start VM1 with VF1, VM2 with VF2, see the prerequisite part. 
2. In the host, run testpmd with floating parameters and make the link down::

    ./testpmd -c 0x3 -n 4 -w 8c:00.0,enable_floating=1 -- -i
    testpmd> port stop all
    testpmd> show port info all

3. In VM1, run testpmd::

    ./testpmd -c 0x3 -n 4 -- -i 
    testpmd>set mac fwd
    testpmd>set promisc off all
    testpmd>start
   
   In VM2, run testpmd::

    ./testpmd -c 0x3 -n 4 -- -i --eth-peer=0, VF1's MAC
    testpmd>set mac fwd
    testpmd>set promisc off all
    testpmd>start

   
4. Send 100 packets to VF1's MAC address, check if VF2 can get 100 packets. Also check the PF's port stats, and there should be no packets RX/TX at PF port. 

5. In the host, run testpmd with floating parameters and keep the link up, then do step3 and step4, PF should have no RX/TX packets even when link is up::
   
    ./testpmc -c 0xc0000 -n 4 --floating -- -i
    testpmd> port start all
    testpmd> show port info all
    

Test Case6: Floating VEB Inter-VM VF traffic can't be out of NIC
================================================================

DPDK PF, then create 1VF, assign VF1 to VM1, send traffic from VF1 to outside world, then check outside world will not see any traffic.

Details: 

1. Start VM1 with VF1, see the prerequisite part. 
2. In the host, run testpmd with floating parameters.
   
   ./testpmd -c 0x3 -n 4 -w 8c:00.0,enable_floating=1 -- -i
3. In VM1, run testpmd, ::

   ./testpmd -c 0x3 -n 4 -- -i --eth-peer=0,pf_mac_addr
   testpmd>set fwd txonly
   testpmd>start
   
  
4. At PF side, check the port stats to see if there is any RX/TX packets, and also check the traffic generator side(e.g: IXIA ports or another port connected to the DUT port) to ensure no packets. 


Thanks
Qian


-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhe Tao
Sent: Friday, March 25, 2016 4:42 PM
To: dev@dpdk.org
Cc: Tao, Zhe; Wu, Jingjing
Subject: [dpdk-dev] [PATCH 1/3 v7] i40e: support floating VEB config

Add the new floating related argument option in the devarg.
Using this parameter, all the samples can decide whether to use legacy VEB/VEPA or floating VEB.
To enable this feature, the user should pass a devargs parameter to the EAL like "-w 84:00.0,enable_floating=1", and the application will make sure the PMD will use the floating VEB feature for all the VFs created by this PF device.

Signed-off-by: Zhe Tao <zhe.tao@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 44 ++++++++++++++++++++++++++++++++++++++++++
 drivers/net/i40e/i40e_ethdev.h |  6 ++++++
 2 files changed, 50 insertions(+)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c index 6fdae57..01f1d3d 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -739,6 +739,44 @@ i40e_add_tx_flow_control_drop_filter(struct i40e_pf *pf)
 				  " frames from VSIs.");
 }
 
+static int i40e_check_floating_handler(__rte_unused const char *key,
+				       const char *value,
+				       __rte_unused void *opaque)
+{
+	if (strcmp(value, "1"))
+		return -1;
+
+	return 0;
+}
+
+static int
+i40e_check_floating(struct rte_devargs *devargs) {
+	struct rte_kvargs *kvlist;
+	const char *floating_key = "enable_floating";
+
+	if (devargs == NULL)
+		return 0;
+
+	kvlist = rte_kvargs_parse(devargs->args, NULL);
+	if (kvlist == NULL)
+		return 0;
+
+	if (!rte_kvargs_count(kvlist, floating_key)) {
+		rte_kvargs_free(kvlist);
+		return 0;
+	}
+	/* Floating is enabled when there's key-value pair: enable_floating=1 */
+	if (rte_kvargs_process(kvlist, floating_key,
+			       i40e_check_floating_handler, NULL) < 0) {
+		rte_kvargs_free(kvlist);
+		return 0;
+	}
+	rte_kvargs_free(kvlist);
+
+	return 1;
+}
+
 static int
 eth_i40e_dev_init(struct rte_eth_dev *dev)  { @@ -829,6 +867,12 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
 		     ((hw->nvm.version >> 4) & 0xff),
 		     (hw->nvm.version & 0xf), hw->nvm.eetrack);
 
+	/* Need the special FW version support floating VEB */
+	if (hw->aq.fw_maj_ver >= FLOATING_FW_MAJ) {
+		pf->floating = i40e_check_floating(pci_dev->devargs);
+	} else {
+		pf->floating = false;
+	}
 	/* Clear PXE mode */
 	i40e_clear_pxe_mode(hw);
 
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h index 1c75672..7dc6936 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -36,6 +36,7 @@
 
 #include <rte_eth_ctrl.h>
 #include <rte_time.h>
+#include <rte_kvargs.h>
 
 #define I40E_VLAN_TAG_SIZE        4
 
@@ -171,6 +172,10 @@ enum i40e_flxpld_layer_idx {  #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
 #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
 
+/* Special FW support this floating VEB feature */ #define 
+FLOATING_FW_MAJ 5 #define FLOATING_FW_MIN 0
+
 struct i40e_adapter;
 
 /**
@@ -446,6 +451,7 @@ struct i40e_pf {
 	struct i40e_fc_conf fc_conf; /* Flow control conf */
 	struct i40e_mirror_rule_list mirror_list;
 	uint16_t nb_mirror_rule;   /* The number of mirror rules */
+	uint16_t floating; /* The flag to use the floating VEB */
 };
 
 enum pending_msg {
--
2.1.4