From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Jiawen Wu <jiawenwu@trustnetic.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure
Date: Mon, 14 Jun 2021 20:05:16 +0300 [thread overview]
Message-ID: <8a23e3a1-74ae-9fae-af1c-e06415cd4950@oktetlabs.ru> (raw)
In-Reply-To: <20210602094108.1575640-2-jiawenwu@trustnetic.com>
On 6/2/21 12:40 PM, Jiawen Wu wrote:
> Adding bare minimum PMD library and doc build infrastructure
> and claim the maintainership for ngbe PMD.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> ---
> MAINTAINERS | 6 ++++++
> doc/guides/nics/features/ngbe.ini | 10 +++++++++
> doc/guides/nics/index.rst | 1 +
> doc/guides/nics/ngbe.rst | 28 ++++++++++++++++++++++++++
> doc/guides/rel_notes/release_21_08.rst | 6 ++++++
> drivers/net/meson.build | 1 +
> drivers/net/ngbe/meson.build | 12 +++++++++++
> drivers/net/ngbe/ngbe_ethdev.c | 5 +++++
> drivers/net/ngbe/ngbe_ethdev.h | 5 +++++
> drivers/net/ngbe/version.map | 3 +++
> 10 files changed, 77 insertions(+)
> create mode 100644 doc/guides/nics/features/ngbe.ini
> create mode 100644 doc/guides/nics/ngbe.rst
> create mode 100644 drivers/net/ngbe/meson.build
> create mode 100644 drivers/net/ngbe/ngbe_ethdev.c
> create mode 100644 drivers/net/ngbe/ngbe_ethdev.h
> create mode 100644 drivers/net/ngbe/version.map
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5877a16971..04672f6eaa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -903,6 +903,12 @@ F: drivers/net/txgbe/
> F: doc/guides/nics/txgbe.rst
> F: doc/guides/nics/features/txgbe.ini
>
> +Wangxun ngbe
> +M: Jiawen Wu <jiawenwu@trustnetic.com>
> +F: drivers/net/ngbe/
> +F: doc/guides/nics/ngbe.rst
> +F: doc/guides/nics/features/ngbe.ini
> +
Because of alphabetical order (n before t), it should go
just beforenet/txgbe.
> VMware vmxnet3
> M: Yong Wang <yongwang@vmware.com>
> F: drivers/net/vmxnet3/
> diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
> new file mode 100644
> index 0000000000..a7a524defc
> --- /dev/null
> +++ b/doc/guides/nics/features/ngbe.ini
> @@ -0,0 +1,10 @@
> +;
> +; Supported features of the 'ngbe' network poll mode driver.
> +;
> +; Refer to default.ini for the full list of available PMD features.
> +;
> +[Features]
> +Linux = Y
> +ARMv8 = Y
> +x86-32 = Y
> +x86-64 = Y
> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> index 799697caf0..31a3e6bcdc 100644
> --- a/doc/guides/nics/index.rst
> +++ b/doc/guides/nics/index.rst
> @@ -47,6 +47,7 @@ Network Interface Controller Drivers
> netvsc
> nfb
> nfp
> + ngbe
> null
> octeontx
> octeontx2
> diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst
> new file mode 100644
> index 0000000000..4ec2623a05
> --- /dev/null
> +++ b/doc/guides/nics/ngbe.rst
> @@ -0,0 +1,28 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> + Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
> +
> +NGBE Poll Mode Driver
> +======================
> +
> +The NGBE PMD (librte_pmd_ngbe) provides poll mode driver support
> +for Wangxun 1 Gigabit Ethernet NICs.
> +
> +Prerequisites
> +-------------
> +
> +- Learning about Wangxun 1 Gigabit Ethernet NICs using
> + `<https://www.net-swift.com/a/386.html>`_.
> +
> +- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
> +
> +Driver compilation and testing
> +------------------------------
> +
> +Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
> +for details.
> +
> +Limitations or Known issues
> +---------------------------
> +
> +Build with ICC is not supported yet.
> +Power8, ARMv7 and BSD are not supported yet.
> diff --git a/doc/guides/rel_notes/release_21_08.rst b/doc/guides/rel_notes/release_21_08.rst
> index a6ecfdf3ce..2deac4f398 100644
> --- a/doc/guides/rel_notes/release_21_08.rst
> +++ b/doc/guides/rel_notes/release_21_08.rst
> @@ -55,6 +55,12 @@ New Features
> Also, make sure to start the actual text at the margin.
> =======================================================
>
> +* **Added Wangxun ngbe PMD.**
> +
> + Added a new PMD driver for Wangxun 1 Gigabit Ethernet NICs.
> +
> + See the :doc:`../nics/ngbe` for more details.
> +
>
> Removed Items
> -------------
> diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> index c8b5ce2980..d6c1751540 100644
> --- a/drivers/net/meson.build
> +++ b/drivers/net/meson.build
> @@ -40,6 +40,7 @@ drivers = [
> 'netvsc',
> 'nfb',
> 'nfp',
> + 'ngbe',
> 'null',
> 'octeontx',
> 'octeontx2',
> diff --git a/drivers/net/ngbe/meson.build b/drivers/net/ngbe/meson.build
> new file mode 100644
> index 0000000000..de2d7be716
> --- /dev/null
> +++ b/drivers/net/ngbe/meson.build
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
> +
> +if is_windows
> + build = false
> + reason = 'not supported on Windows'
> + subdir_done()
> +endif
> +
> +sources = files(
> + 'ngbe_ethdev.c',
> +)
> diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
> new file mode 100644
> index 0000000000..e424ff11a2
> --- /dev/null
> +++ b/drivers/net/ngbe/ngbe_ethdev.c
> @@ -0,0 +1,5 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
> + * Copyright(c) 2010-2017 Intel Corporation
> + */
> +
I strongly dislike empty files with just copyrights.
At least dummy (always fail) probe/remove should be
in the first patch.
> diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
> new file mode 100644
> index 0000000000..e424ff11a2
> --- /dev/null
> +++ b/drivers/net/ngbe/ngbe_ethdev.h
> @@ -0,0 +1,5 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
> + * Copyright(c) 2010-2017 Intel Corporation
> + */
> +
Same here
> diff --git a/drivers/net/ngbe/version.map b/drivers/net/ngbe/version.map
> new file mode 100644
> index 0000000000..4a76d1d52d
> --- /dev/null
> +++ b/drivers/net/ngbe/version.map
> @@ -0,0 +1,3 @@
> +DPDK_21 {
> + local: *;
> +};
>
next prev parent reply other threads:[~2021-06-14 17:05 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 9:40 [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05 ` Andrew Rybchenko [this message]
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08 ` Andrew Rybchenko
2021-06-15 2:52 ` Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Jiawen Wu
2021-06-14 17:54 ` Andrew Rybchenko
2021-06-15 7:13 ` Jiawen Wu
2021-07-01 13:57 ` David Marchand
2021-07-02 2:08 ` Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45 ` Andrew Rybchenko
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02 9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53 ` Andrew Rybchenko
2021-06-15 7:50 ` Jiawen Wu
2021-06-15 8:06 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22 ` Andrew Rybchenko
2021-06-14 19:23 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44 ` Andrew Rybchenko
2021-06-02 9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11 1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8a23e3a1-74ae-9fae-af1c-e06415cd4950@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).