Re: [dpdk-dev] [PATCH] net/mlx5: fix flow engine select by rdma-core ver

[Ferruh Yigit <ferruh.yigit@intel.com>]

On 11/26/2019 12:48 PM, Dekel Peled wrote:
> Thanks, PSB
> 
>> -----Original Message-----
>> From: Ferruh Yigit <ferruh.yigit@intel.com>
>> Sent: Tuesday, November 26, 2019 1:29 PM
>> To: Dekel Peled <dekelp@mellanox.com>; Matan Azrad
>> <matan@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>; Slava
>> Ovsiienko <viacheslavo@mellanox.com>
>> Cc: Ori Kam <orika@mellanox.com>; dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH] net/mlx5: fix flow engine select by rdma-
>> core ver
>>
>> On 11/26/2019 8:34 AM, Dekel Peled wrote:
>>> Recent patch [1] sets the DV (Direct Verbs) flow engine as default.
>>> Newer versions of DV flow engine use the DR (Direct Rules) features.
>>> DR is supported from RDMA Core library version rdma-core-24.0.
>>> This cause failure to start port when using older rdma-core version,
>>> without DR support.
>>>
>>> This patch selects DV flow engine if rdma-core version is v24.0 or
>>> higher. Verbs flow engine is selected otherwise.
>>>
>>> [1]
>>>
>> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
>>>
>> es.dpdk.org%2Fpatch%2F61900%2F&amp;data=02%7C01%7Cdekelp%40mell
>> anox.co
>>>
>> m%7C38999818be02482ca83608d77263e1f3%7Ca652971c7d2e4d9ba6a4d1492
>> 56f461
>>>
>> b%7C0%7C0%7C637103645640442451&amp;sdata=wytpQti4UM8l2xMxWRNl
>> mx0oxnrxv
>>> o2vWG6gwN8iAo8%3D&amp;reserved=0
>>
>> Can you please add reference to the git commit instead of the patchwork,
>> and I assume the commit is the one ins the fixes line, so why to add
>> additional patchwork link too?
>>
> 
> I accept, the reference is redundant and can be removed.
> Should I send v2? or can you remove it when taking the patch?

I updated in next-net, thanks.

> 
>>>
>>> Fixes: cd4569d2bf3c ("net/mlx5: change default flow engine to DV")
>>>
>>> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
>>> Acked-by: Ori Kam <orika@mellanox.com>
>>> ---
>>>  doc/guides/nics/mlx5.rst               | 2 +-
>>>  doc/guides/rel_notes/release_19_11.rst | 3 +++
>>>  drivers/net/mlx5/mlx5.c                | 2 +-
>>>  3 files changed, 5 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
>>> 2080766..771970f 100644
>>> --- a/doc/guides/nics/mlx5.rst
>>> +++ b/doc/guides/nics/mlx5.rst
>>> @@ -673,7 +673,7 @@ Run-time configuration
>>>  - ``dv_flow_en`` parameter [int]
>>>
>>>    A nonzero value enables the DV flow steering assuming it is
>>> supported
>>> -  by the driver.
>>> +  by the driver (RDMA Core library version is rdma-core-24.0 or higher).
>>>
>>>    Enabled by default if supported.
>>>
>>> diff --git a/doc/guides/rel_notes/release_19_11.rst
>>> b/doc/guides/rel_notes/release_19_11.rst
>>> index 48c80e5..928698e 100644
>>> --- a/doc/guides/rel_notes/release_19_11.rst
>>> +++ b/doc/guides/rel_notes/release_19_11.rst
>>> @@ -193,6 +193,9 @@ New Features
>>>    * Added support for matching on packets withe Geneve tunnel header.
>>>    * Added hairpin support.
>>>    * Added ConnectX6-DX support.
>>> +  * Flow engine selected based on RDMA Core library version.
>>> +    DV flow engine selected if version is rdma-core-24.0 or higher.
>>> +    Verbs flow engine selected otherwise.
>>>
>>>  * **Updated the AF_XDP PMD.**
>>>
>>> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
>>> 59ae408..8abd1b1 100644
>>> --- a/drivers/net/mlx5/mlx5.c
>>> +++ b/drivers/net/mlx5/mlx5.c
>>> @@ -2428,7 +2428,7 @@ struct mlx5_flow_id_pool *
>>>  	!defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
>>>  	DRV_LOG(DEBUG, "counters are not supported");  #endif -#ifndef
>>> HAVE_IBV_FLOW_DV_SUPPORT
>>> +#if !defined(HAVE_IBV_FLOW_DV_SUPPORT) ||
>> !defined(HAVE_MLX5DV_DR)
>>>  	if (config.dv_flow_en) {
>>>  		DRV_LOG(WARNING, "DV flow is not supported");
>>>  		config.dv_flow_en = 0;
>>>
>