From: Anubhav Choudhary <achoudhary@sandvine.com>
To: "Xing, Beilei" <beilei.xing@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>, "users@dpdk.org" <users@dpdk.org>
Subject: Re: [dpdk-dev] Garbage value is returned while reading moudle eeprom for i40e (PF) with DPDK 18.11
Date: Wed, 1 Apr 2020 07:12:49 +0000 [thread overview]
Message-ID: <8ec8418c517f4589aaf3f5a9534ab6e7@sandvine.com> (raw)
In-Reply-To: <e153faa57b32417f8871f027b8bb57cd@sandvine.com>
Hi,
I found a bug in i40e driver which caused the issue shown in the mail chain. Here is the patch for this :
Author: Anubhav Choudhary <achoudhary@sandvine.com>
Date: Sun Mar 29 07:27:20 2020 -0400
BUG: Fix i40e_get_module_eeprom function in i40e driver
In the implementation of i40e_get_module_eeprom, while calling the
i40e_aq_get_phy_register, the parameters are not passed in right
order. The position of page-change and offset has been swapped due
to which garbage value was returned in place of module EEPROM data.
Reviewed-By: Daniel Romell
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index dca61f03a..fd84b57cc 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -11919,7 +11919,7 @@ static int i40e_get_module_eeprom(struct rte_eth_dev *dev,
}
status = i40e_aq_get_phy_register(hw,
I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE,
- addr, offset, 1, &value, NULL);
+ addr, 1, offset, &value, NULL);
if (status)
return -EIO;
data[i] = (uint8_t)value;
Regards,
Anubhav
From: Anubhav Choudhary
Sent: Thursday, March 19, 2020 11:51 AM
To: Xing, Beilei
Subject: Re: Garbage value is returned while reading moudle eeprom for i40e (PF) with DPDK 18.11
Hi Beilei,
I have used ethtool (dpdk sample application: https://doc.dpdk.org/guides/sample_app_ug/ethtool.html) for dumping the eeprom data. It uses the following code for reading the data :
int
rte_ethtool_get_module_eeprom(uint16_t port_id, struct ethtool_eeprom *eeprom,
void *words)
{
struct rte_dev_eeprom_info eeprom_info;
int status;
if (eeprom == NULL || words == NULL)
return -EINVAL;
eeprom_info.offset = eeprom->offset;
eeprom_info.length = eeprom->len;
eeprom_info.data = words;
status = rte_eth_dev_get_module_eeprom(port_id, &eeprom_info);
if (status)
return status;
return 0;
}
Ref : https://github.com/DPDK/dpdk/blob/v18.11/examples/ethtool/lib/rte_ethtool.c#L190
________________________________
From: Xing, Beilei <beilei.xing@intel.com>
Sent: Thursday, March 19, 2020 11:28:33 AM
To: Anubhav Choudhary
Subject: RE: Garbage value is returned while reading moudle eeprom for i40e (PF) with DPDK 18.11
[EXTERNAL]
Hi,
Could you show me how you dumped eeprom in the script? Read the register?
BR,
Beilei
-----Original Message-----
From: dev <dev-bounces@dpdk.org> On Behalf Of Anubhav Choudhary
Sent: 2020年3月14日 23:56
To: dev@dpdk.org; users@dpdk.org
Subject: [dpdk-dev] Garbage value is returned while reading moudle eeprom for i40e (PF) with DPDK 18.11
Hi,
I am using Intel X710 along with FINISAR module (FTLX1471D3BCL). I am trying to read the module's eeprom but I am getting garbage values when DPDK is used. However, it is working perfectly fine when device is bound to the linux kernel. I have attached the device details along with the eeprom dumps. Note that I have executed the command in a VM where Intel X710 was using pci-passthrough. Let me know if more details are required to understand the issue.
Case 1 : When device used Linux Kernel
root@test-system:/home/anubhav# ethtool -i eth2
driver: i40e
version: 2.1.14-k
firmware-version: 7.10 0x800051a6 19.0.12
expansion-rom-version:
bus-info: 0000:00:0b.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
root@test-system:/home/anubhav # ethtool -m eth2 raw on > module_eeprom_kernel.bin root@test-system:/home/anubhav # hexdump -x -v module_eeprom_kernel.bin
0000000 0403 2007 0000 0000 0000 0600 0067 640a
0000010 0000 0000 4946 494e 4153 2052 4f43 5052
0000020 202e 2020 0000 6590 5446 584c 3431 3137
0000030 3344 4342 204c 2020 2041 2020 1e05 6300
0000040 1a00 0000 4c55 3038 3732 2056 2020 2020
0000050 2020 2020 3131 3830 3631 2020 f068 ce03
0000060 0000 0000 0000 0000 0000 0000 0000 0000
0000070 0000 0000 0000 0000 0000 0000 0000 0000
0000080 0000 0000 0000 0000 0000 0000 0000 0000
0000090 0000 0000 0000 0000 0000 0000 0000 0000
00000a0 0000 0000 0000 0000 0000 0000 0000 0000
00000b0 0000 0000 0000 0000 0000 0000 0000 0000
00000c0 0000 0000 0000 0000 0000 0000 0000 0000
00000d0 0000 0000 0000 0000 0000 0000 0000 0000
00000e0 0000 0000 0000 0000 0000 0000 0000 0000
00000f0 0000 0000 0000 0000 0000 0000 0000 0000
0000100 004e 00f3 0049 00f8 8890 4871 a08c 3075
0000110 04a6 4c1d 409c 1027 e93d 3106 2d31 cb07
0000120 7745 6400 e93d 9e00 0000 0000 0000 0000
0000130 0000 0000 0000 0000 0000 0000 0000 0000
0000140 0000 0000 803f 0000 0000 0000 0001 0000
0000150 0001 0000 0001 0000 0001 0000 0000 7e00
0000160 2c20 2c82 1a42 c31d 681a 0000 0000 0030
0000170 0000 0000 0000 0000 ffff ffff ffff 01ff
0000180 0000 0000 0000 0000 0000 0000 0000 0000
0000190 0000 0000 0000 0000 0000 0000 0000 0000
00001a0 0000 0000 0000 0000 0000 0000 0000 0000
00001b0 0000 0000 0000 0000 0000 0000 0000 0000
00001c0 0000 0000 0000 0000 0000 0000 0000 0000
00001d0 0000 0000 0000 0000 0000 0000 0000 0000
00001e0 0000 0000 0000 0000 0000 0000 0000 0000
00001f0 0000 0000 0000 0000 0000 0000 0000 0000
0000200
Case 2: When device is used with DPDK (18.11)
root@test-system:/home/anubhav# ./ethtool
EAL: Detected 92 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable clock cycles !
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:100e net_e1000_em
EAL: PCI device 0000:00:04.0 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:100e net_e1000_em
EAL: PCI device 0000:00:0b.0 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:00:0b.1 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:1572 net_i40e
Number of NICs: 2
Init port 0..
Init port 1..
EthApp> drvinfo
Port 0 driver: net_i40e (ver: DPDK 18.11.5)
firmware-version: 7.10 0x800051a6 19.0.12
bus-info: 0000:00:0b.0
Port 1 driver: net_i40e (ver: DPDK 18.11.5)
firmware-version: 7.10 0x800051a6 19.0.12
bus-info: 0000:00:0b.1
EthApp> module-eeprom 0 module_eeprom_dpdk.bin
Total plugin module EEPROM length: 512 bytes
EthApp> quit
root@test-system:/home/anubhav# hexdump -x -v module_eeprom_dpdk.bin
0000000 0404 0404 0404 0404 0404 0404 0404 0404
0000010 0404 0404 0404 0404 0404 0404 0404 0404
0000020 0404 0404 0404 0404 0404 0404 0404 0404
0000030 0404 0404 0404 0404 0404 0404 0404 0404
0000040 0404 0404 0404 0404 0404 0404 0404 0404
0000050 0404 0404 0404 0404 0404 0404 0404 0404
0000060 0404 0404 0404 0404 0404 0404 0404 0404
0000070 0404 0404 0404 0404 0404 0404 0404 0404
0000080 0404 0404 0404 0404 0404 0404 0404 0404
0000090 0404 0404 0404 0404 0404 0404 0404 0404
00000a0 0404 0404 0404 0404 0404 0404 0404 0404
00000b0 0404 0404 0404 0404 0404 0404 0404 0404
00000c0 0404 0404 0404 0404 0404 0404 0404 0404
00000d0 0404 0404 0404 0404 0404 0404 0404 0404
00000e0 0404 0404 0404 0404 0404 0404 0404 0404
00000f0 0404 0404 0404 0404 0404 0404 0404 0404
0000100 0000 0000 0000 0000 0000 0000 0000 0000
0000110 0000 0000 0000 0000 0000 0000 0000 0000
0000120 0000 0000 0000 0000 0000 0000 0000 0000
0000130 0000 0000 0000 0000 0000 0000 0000 0000
0000140 0000 0000 0000 0000 0000 0000 0000 0000
0000150 0000 0000 0000 0000 0000 0000 0000 0000
0000160 0000 0000 0000 0000 0000 0000 0000 0000
0000170 0000 0000 0000 0000 0000 0000 0000 0000
0000180 0000 0000 0000 0000 0000 0000 0000 0000
0000190 0000 0000 0000 0000 0000 0000 0000 0000
00001a0 0000 0000 0000 0000 0000 0000 0000 0000
00001b0 0000 0000 0000 0000 0000 0000 0000 0000
00001c0 0000 0000 0000 0000 0000 0000 0000 0000
00001d0 0000 0000 0000 0000 0000 0000 0000 0000
00001e0 0000 0000 0000 0000 0000 0000 0000 0000
00001f0 0000 0000 0000 0000 0000 0000 0000 0000
0000200
Regards,
Anubhav Choudhary
Disclaimer:
This communication (including any attachments) is intended for the use of the intended recipient(s) only and may contain information that is considered confidential, proprietary, sensitive and/or otherwise legally protected. Any unauthorized use or dissemination of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the sender by return e-mail message and delete all copies of the original communication. Thank you for your cooperation.
next prev parent reply other threads:[~2020-04-02 15:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-14 15:56 Anubhav Choudhary
[not found] ` <BYAPR11MB35417A33538623679D6A45A5F7F40@BYAPR11MB3541.namprd11.prod.outlook.com>
[not found] ` <e153faa57b32417f8871f027b8bb57cd@sandvine.com>
2020-04-01 7:12 ` Anubhav Choudhary [this message]
2020-04-02 0:51 ` Xing, Beilei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8ec8418c517f4589aaf3f5a9534ab6e7@sandvine.com \
--to=achoudhary@sandvine.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).