From: "Xing, Beilei" <beilei.xing@intel.com>
To: Tonghao Zhang <xiangxia.m.yue@gmail.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for rte_intr_enable.
Date: Thu, 11 Jan 2018 07:06:13 +0000 [thread overview]
Message-ID: <94479800C636CB44BD422CB454846E013208AC68@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1515161439-4792-4-git-send-email-xiangxia.m.yue@gmail.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Tonghao Zhang
> Sent: Friday, January 5, 2018 10:11 PM
> To: dev@dpdk.org
> Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> Subject: [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for rte_intr_enable.
The patch is not only for ixgbevf, but also for ixgbe, right?
so how about changing the title with net/ixgbe started?
> When we bind the ixgbevf to vfio and call the rte_eth_dev_rx_intr_enable
> and rte_eth_dev_rx_intr_disable frequently, the interrupt setting
> (msi_set_mask_bit) will take more CPU as show below. rte_intr_enable call
> the ioctl to map the fd to interrupts frequently.
>
> perf top:
> 5.45% [kernel] [k] msi_set_mask_bit
>
> It is unnecessary to call the rte_intr_enable in
> ixgbe_dev_rx_queue_intr_enable. because the fds has been mapped to
> interrupt and not unmapped in ixgbe_dev_rx_queue_intr_disable.
>
> This patch add checks for using VFIO. With the patch, msi_set_mask_bit is
> not listed in perl any more. Any suggestion will be welcome.
>
> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> ---
> drivers/net/ixgbe/ixgbe_ethdev.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> b/drivers/net/ixgbe/ixgbe_ethdev.c
> index e929235..79e4097 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -5610,7 +5610,9 @@ static void ixgbevf_set_vfta_all(struct rte_eth_dev
> *dev, bool on)
> RTE_SET_USED(queue_id);
> IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, intr->mask);
>
> - rte_intr_enable(intr_handle);
> + if (intr_handle->type == RTE_INTR_HANDLE_UIO ||
> + intr_handle->type == RTE_INTR_HANDLE_UIO_INTX)
> + rte_intr_enable(intr_handle);
For igb_uio, did you check if it's necessary to call rte_intr_enable every time? Since rte interrupt is not disabled during ixgbevf_dev_rx_queue_intr_disable.
>
> return 0;
> }
> @@ -5659,7 +5661,10 @@ static void ixgbevf_set_vfta_all(struct
> rte_eth_dev *dev, bool on)
> mask &= (1 << (queue_id - 32));
> IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
> }
> - rte_intr_enable(intr_handle);
> +
> + if (intr_handle->type == RTE_INTR_HANDLE_UIO ||
> + intr_handle->type == RTE_INTR_HANDLE_UIO_INTX)
> + rte_intr_enable(intr_handle);
The same comment as above.
>
> return 0;
> }
> --
> 1.8.3.1
next prev parent reply other threads:[~2018-01-11 7:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-05 14:10 [dpdk-dev] [PATCH 1/5] net/ixgbevf: unregister irq handler when other interrupts not allowed Tonghao Zhang
2018-01-05 14:10 ` [dpdk-dev] [PATCH 2/5] net/ixgbevf: set the inter-interrupt interval for EITR Tonghao Zhang
2018-01-11 7:26 ` Xing, Beilei
2018-01-11 14:46 ` Tonghao Zhang
2018-01-05 14:10 ` [dpdk-dev] [PATCH 3/5] net/ixgbevf: save IXGBE_VTEIMS to intr->mask for performance Tonghao Zhang
2018-01-11 7:09 ` Xing, Beilei
2018-01-05 14:10 ` [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for rte_intr_enable Tonghao Zhang
2018-01-11 7:06 ` Xing, Beilei [this message]
2018-01-11 15:35 ` Tonghao Zhang
2018-01-12 12:10 ` Dai, Wei
2018-01-14 6:51 ` Tonghao Zhang
2018-01-05 14:10 ` [dpdk-dev] [PATCH 5/5] vhost: add reconnect thread name for client mode Tonghao Zhang
2018-01-09 13:12 ` Yuanhan Liu
2018-01-09 13:40 ` Yuanhan Liu
2018-01-09 15:28 ` Tonghao Zhang
2018-01-11 6:55 ` [dpdk-dev] [PATCH 1/5] net/ixgbevf: unregister irq handler when other interrupts not allowed Xing, Beilei
2018-01-11 14:24 ` Tonghao Zhang
-- strict thread matches above, loose matches on Subject: below --
2018-01-05 13:57 Tonghao Zhang
2018-01-05 13:57 ` [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for rte_intr_enable Tonghao Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94479800C636CB44BD422CB454846E013208AC68@SHSMSX101.ccr.corp.intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=xiangxia.m.yue@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).