Fix the missing Tx-bps counter for memif zero-copy mode Before Rx-pps: 6891450 Rx-bps: 3528438928 Tx-pps: 6891482 Tx-bps: 0 After Throughput (since last show) Rx-pps: 11157056 Rx-bps: 5712413016 Tx-pps: 11157056 Tx-bps: 5712413016 Fixes: 43b815d88188 ("net/memif: support zero-copy slave") Cc: stable@dpdk.org Signed-off-by: Tianyu Li <tianyu.li@arm.com> --- drivers/net/memif/rte_eth_memif.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/memif/rte_eth_memif.c b/drivers/net/memif/rte_eth_memif.c index 77c95bcb7..dd2825968 100644 --- a/drivers/net/memif/rte_eth_memif.c +++ b/drivers/net/memif/rte_eth_memif.c @@ -706,6 +706,7 @@ memif_tx_one_zc(struct pmd_process_private *proc_private, struct memif_queue *mq /* populate descriptor */ d0 = &ring->desc[slot & mask]; d0->length = rte_pktmbuf_data_len(mbuf); + mq->n_bytes += rte_pktmbuf_data_len(mbuf); /* FIXME: get region index */ d0->region = 1; d0->offset = rte_pktmbuf_mtod(mbuf, uint8_t *) - -- 2.25.1
On 4/12/2021 9:22 AM, Tianyu Li wrote:
> Fix the missing Tx-bps counter for memif zero-copy mode
> Before
> Rx-pps: 6891450 Rx-bps: 3528438928
> Tx-pps: 6891482 Tx-bps: 0
> After
> Throughput (since last show)
> Rx-pps: 11157056 Rx-bps: 5712413016
> Tx-pps: 11157056 Tx-bps: 5712413016
>
> Fixes: 43b815d88188 ("net/memif: support zero-copy slave")
> Cc: stable@dpdk.org
>
> Signed-off-by: Tianyu Li <tianyu.li@arm.com>
> ---
> drivers/net/memif/rte_eth_memif.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/memif/rte_eth_memif.c b/drivers/net/memif/rte_eth_memif.c
> index 77c95bcb7..dd2825968 100644
> --- a/drivers/net/memif/rte_eth_memif.c
> +++ b/drivers/net/memif/rte_eth_memif.c
> @@ -706,6 +706,7 @@ memif_tx_one_zc(struct pmd_process_private *proc_private, struct memif_queue *mq
> /* populate descriptor */
> d0 = &ring->desc[slot & mask];
> d0->length = rte_pktmbuf_data_len(mbuf);
> + mq->n_bytes += rte_pktmbuf_data_len(mbuf);
> /* FIXME: get region index */
> d0->region = 1;
> d0->offset = rte_pktmbuf_mtod(mbuf, uint8_t *) -
>
Looks good to me, but let's wait Jakub's review for it.
Hi Jakub,
Any comments about the patch?
-----Original Message-----
From: Ferruh Yigit <ferruh.yigit@intel.com>
Sent: Wednesday, April 14, 2021 4:13 PM
To: Tianyu Li <Tianyu.Li@arm.com>; Jakub Grajciar <jgrajcia@cisco.com>
Cc: dev@dpdk.org; nd <nd@arm.com>; stable@dpdk.org
Subject: Re: [PATCH] net/memif: fix missing Tx-bps stats for zero-copy
On 4/12/2021 9:22 AM, Tianyu Li wrote:
> Fix the missing Tx-bps counter for memif zero-copy mode Before
> Rx-pps: 6891450 Rx-bps: 3528438928
> Tx-pps: 6891482 Tx-bps: 0
> After
> Throughput (since last show)
> Rx-pps: 11157056 Rx-bps: 5712413016
> Tx-pps: 11157056 Tx-bps: 5712413016
>
> Fixes: 43b815d88188 ("net/memif: support zero-copy slave")
> Cc: stable@dpdk.org
>
> Signed-off-by: Tianyu Li <tianyu.li@arm.com>
> ---
> drivers/net/memif/rte_eth_memif.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/memif/rte_eth_memif.c
> b/drivers/net/memif/rte_eth_memif.c
> index 77c95bcb7..dd2825968 100644
> --- a/drivers/net/memif/rte_eth_memif.c
> +++ b/drivers/net/memif/rte_eth_memif.c
> @@ -706,6 +706,7 @@ memif_tx_one_zc(struct pmd_process_private *proc_private, struct memif_queue *mq
> /* populate descriptor */
> d0 = &ring->desc[slot & mask];
> d0->length = rte_pktmbuf_data_len(mbuf);
> + mq->n_bytes += rte_pktmbuf_data_len(mbuf);
> /* FIXME: get region index */
> d0->region = 1;
> d0->offset = rte_pktmbuf_mtod(mbuf, uint8_t *) -
>
Looks good to me, but let's wait Jakub's review for it.
On 4/27/2021 7:30 AM, Tianyu Li wrote: > Hi Jakub, > > Any comments about the patch? > +Damjan. Hi Damjan, Is Jakub still maintaining the net/memif? > -----Original Message----- > From: Ferruh Yigit <ferruh.yigit@intel.com> > Sent: Wednesday, April 14, 2021 4:13 PM > To: Tianyu Li <Tianyu.Li@arm.com>; Jakub Grajciar <jgrajcia@cisco.com> > Cc: dev@dpdk.org; nd <nd@arm.com>; stable@dpdk.org > Subject: Re: [PATCH] net/memif: fix missing Tx-bps stats for zero-copy > > On 4/12/2021 9:22 AM, Tianyu Li wrote: >> Fix the missing Tx-bps counter for memif zero-copy mode Before >> Rx-pps: 6891450 Rx-bps: 3528438928 >> Tx-pps: 6891482 Tx-bps: 0 >> After >> Throughput (since last show) >> Rx-pps: 11157056 Rx-bps: 5712413016 >> Tx-pps: 11157056 Tx-bps: 5712413016 >> >> Fixes: 43b815d88188 ("net/memif: support zero-copy slave") >> Cc: stable@dpdk.org >> >> Signed-off-by: Tianyu Li <tianyu.li@arm.com> >> --- >> drivers/net/memif/rte_eth_memif.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/net/memif/rte_eth_memif.c >> b/drivers/net/memif/rte_eth_memif.c >> index 77c95bcb7..dd2825968 100644 >> --- a/drivers/net/memif/rte_eth_memif.c >> +++ b/drivers/net/memif/rte_eth_memif.c >> @@ -706,6 +706,7 @@ memif_tx_one_zc(struct pmd_process_private *proc_private, struct memif_queue *mq >> /* populate descriptor */ >> d0 = &ring->desc[slot & mask]; >> d0->length = rte_pktmbuf_data_len(mbuf); >> + mq->n_bytes += rte_pktmbuf_data_len(mbuf); >> /* FIXME: get region index */ >> d0->region = 1; >> d0->offset = rte_pktmbuf_mtod(mbuf, uint8_t *) - >> > > Looks good to me, but let's wait Jakub's review for it. >
Hi,
Sorry for the inconvenience, the thread got filtered so I only found it in spam after Damjan notified me.
The patch looks good. Thanks for the fix!
Reviewd-By: Jakub Grajciar <jgrajcia@cisco.com>
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Tuesday, May 18, 2021 2:09 PM
> To: Tianyu Li <Tianyu.Li@arm.com>; Jakub Grajciar -X (jgrajcia - PANTHEON
> TECH SRO at Cisco) <jgrajcia@cisco.com>; Damjan Marion (damarion)
> <damarion@cisco.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; stable@dpdk.org
> Subject: Re: [PATCH] net/memif: fix missing Tx-bps stats for zero-copy
>
> On 4/27/2021 7:30 AM, Tianyu Li wrote:
> > Hi Jakub,
> >
> > Any comments about the patch?
> >
>
> +Damjan.
>
> Hi Damjan,
>
> Is Jakub still maintaining the net/memif?
>
> > -----Original Message-----
> > From: Ferruh Yigit <ferruh.yigit@intel.com>
> > Sent: Wednesday, April 14, 2021 4:13 PM
> > To: Tianyu Li <Tianyu.Li@arm.com>; Jakub Grajciar <jgrajcia@cisco.com>
> > Cc: dev@dpdk.org; nd <nd@arm.com>; stable@dpdk.org
> > Subject: Re: [PATCH] net/memif: fix missing Tx-bps stats for zero-copy
> >
> > On 4/12/2021 9:22 AM, Tianyu Li wrote:
> >> Fix the missing Tx-bps counter for memif zero-copy mode Before
> >> Rx-pps: 6891450 Rx-bps: 3528438928
> >> Tx-pps: 6891482 Tx-bps: 0
> >> After
> >> Throughput (since last show)
> >> Rx-pps: 11157056 Rx-bps: 5712413016
> >> Tx-pps: 11157056 Tx-bps: 5712413016
> >>
> >> Fixes: 43b815d88188 ("net/memif: support zero-copy slave")
> >> Cc: stable@dpdk.org
> >>
> >> Signed-off-by: Tianyu Li <tianyu.li@arm.com>
> >> ---
> >> drivers/net/memif/rte_eth_memif.c | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> diff --git a/drivers/net/memif/rte_eth_memif.c
> >> b/drivers/net/memif/rte_eth_memif.c
> >> index 77c95bcb7..dd2825968 100644
> >> --- a/drivers/net/memif/rte_eth_memif.c
> >> +++ b/drivers/net/memif/rte_eth_memif.c
> >> @@ -706,6 +706,7 @@ memif_tx_one_zc(struct pmd_process_private
> *proc_private, struct memif_queue *mq
> >> /* populate descriptor */
> >> d0 = &ring->desc[slot & mask];
> >> d0->length = rte_pktmbuf_data_len(mbuf);
> >> + mq->n_bytes += rte_pktmbuf_data_len(mbuf);
> >> /* FIXME: get region index */
> >> d0->region = 1;
> >> d0->offset = rte_pktmbuf_mtod(mbuf, uint8_t *) -
> >>
> >
> > Looks good to me, but let's wait Jakub's review for it.
> >
On 4/12/2021 9:22 AM, Tianyu Li wrote:
> Fix the missing Tx-bps counter for memif zero-copy mode
> Before
> Rx-pps: 6891450 Rx-bps: 3528438928
> Tx-pps: 6891482 Tx-bps: 0
> After
> Throughput (since last show)
> Rx-pps: 11157056 Rx-bps: 5712413016
> Tx-pps: 11157056 Tx-bps: 5712413016
>
> Fixes: 43b815d88188 ("net/memif: support zero-copy slave")
> Cc: stable@dpdk.org
>
> Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
Applied to dpdk-next-net/main, thanks.