From: "Morten Brørup" <mb@smartsharesystems.com>
To: "Olivier Matz" <olivier.matz@6wind.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] FW: [PATCH] librte_net: define TCP flags in rte_tcp.h instead of in rte_eth_ctrl.h
Date: Fri, 10 May 2019 09:01:09 +0200 [thread overview]
Message-ID: <98CBD80474FA8B44BF855DF32C47DC35B42838@smartserver.smartshare.dk> (raw)
Hi Olivier,
I submitted the below patch about a month ago, and nothing happened. The patch is simple and obvious. Is something wrong with it, or did I not follow the submission process correctly?
Med venlig hilsen / kind regards
Morten Brørup
CTO
SmartShare Systems A/S
Tonsbakken 16-18
DK-2740 Skovlunde
Denmark
Office +45 70 20 00 93
Direct +45 89 93 50 22
Mobile +45 25 40 82 12
mb@smartsharesystems.com
www.smartsharesystems.com
-----Original Message-----
From: Morten Brørup [mailto:mb@smartsharesystems.com]
Sent: Friday, April 5, 2019 11:55 AM
To: olivier.matz@6wind.com; thomas@monjalon.net; ferruh.yigit@intel.com; arybchenko@solarflare.com
Cc: dev@dpdk.org; Morten Brørup
Subject: [PATCH] librte_net: define TCP flags in rte_tcp.h instead of in rte_eth_ctrl.h
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
---
app/test-pmd/cmdline.c | 4 ++--
drivers/net/e1000/igb_ethdev.c | 8 ++++----
lib/librte_ethdev/rte_eth_ctrl.h | 8 +-------
lib/librte_net/rte_tcp.h | 13 +++++++++++++
4 files changed, 20 insertions(+), 13 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index ee50e45..59a45c1 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -9983,7 +9983,7 @@ cmd_2tuple_filter_parsed(void *parsed_result,
" when protocol is TCP.\n");
return;
}
- if (res->tcp_flags_value > TCP_FLAG_ALL) {
+ if (res->tcp_flags_value > RTE_NTUPLE_TCP_FLAGS_MASK) {
printf("invalid TCP flags.\n");
return;
}
@@ -10141,7 +10141,7 @@ cmd_5tuple_filter_parsed(void *parsed_result,
" when protocol is TCP.\n");
return;
}
- if (res->tcp_flags_value > TCP_FLAG_ALL) {
+ if (res->tcp_flags_value > RTE_NTUPLE_TCP_FLAGS_MASK) {
printf("invalid TCP flags.\n");
return;
}
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index b897e8a..c2fe19a 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -3702,7 +3702,7 @@ ntuple_filter_to_2tuple(struct rte_eth_ntuple_filter *filter,
return -EINVAL;
if (filter->priority > E1000_2TUPLE_MAX_PRI)
return -EINVAL; /* filter index is out of range. */
- if (filter->tcp_flags > TCP_FLAG_ALL)
+ if (filter->tcp_flags > RTE_NTUPLE_TCP_FLAGS_MASK)
return -EINVAL; /* flags is invalid. */
switch (filter->dst_port_mask) {
@@ -3782,7 +3782,7 @@ igb_inject_2uple_filter(struct rte_eth_dev *dev,
ttqf &= ~E1000_TTQF_MASK_ENABLE;
/* tcp flags bits setting. */
- if (filter->filter_info.tcp_flags & TCP_FLAG_ALL) {
+ if (filter->filter_info.tcp_flags & RTE_NTUPLE_TCP_FLAGS_MASK) {
if (filter->filter_info.tcp_flags & TCP_URG_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_URG;
if (filter->filter_info.tcp_flags & TCP_ACK_FLAG)
@@ -4188,7 +4188,7 @@ ntuple_filter_to_5tuple_82576(struct rte_eth_ntuple_filter *filter,
return -EINVAL;
if (filter->priority > E1000_2TUPLE_MAX_PRI)
return -EINVAL; /* filter index is out of range. */
- if (filter->tcp_flags > TCP_FLAG_ALL)
+ if (filter->tcp_flags > RTE_NTUPLE_TCP_FLAGS_MASK)
return -EINVAL; /* flags is invalid. */
switch (filter->dst_ip_mask) {
@@ -4318,7 +4318,7 @@ igb_inject_5tuple_filter_82576(struct rte_eth_dev *dev,
imir |= filter->filter_info.priority << E1000_IMIR_PRIORITY_SHIFT;
/* tcp flags bits setting. */
- if (filter->filter_info.tcp_flags & TCP_FLAG_ALL) {
+ if (filter->filter_info.tcp_flags & RTE_NTUPLE_TCP_FLAGS_MASK) {
if (filter->filter_info.tcp_flags & TCP_URG_FLAG)
imir_ext |= E1000_IMIREXT_CTRL_URG;
if (filter->filter_info.tcp_flags & TCP_ACK_FLAG)
diff --git a/lib/librte_ethdev/rte_eth_ctrl.h b/lib/librte_ethdev/rte_eth_ctrl.h
index 5ea8ae2..f21e84b 100644
--- a/lib/librte_ethdev/rte_eth_ctrl.h
+++ b/lib/librte_ethdev/rte_eth_ctrl.h
@@ -184,13 +184,7 @@ struct rte_eth_syn_filter {
RTE_NTUPLE_FLAGS_DST_PORT | \
RTE_NTUPLE_FLAGS_PROTO)
-#define TCP_URG_FLAG 0x20
-#define TCP_ACK_FLAG 0x10
-#define TCP_PSH_FLAG 0x08
-#define TCP_RST_FLAG 0x04
-#define TCP_SYN_FLAG 0x02
-#define TCP_FIN_FLAG 0x01
-#define TCP_FLAG_ALL 0x3F
+#define RTE_NTUPLE_TCP_FLAGS_MASK 0x3F /**< TCP flags filter can match. */
/**
* A structure used to define the ntuple filter entry
diff --git a/lib/librte_net/rte_tcp.h b/lib/librte_net/rte_tcp.h
index 91f5898..2e89b5e 100644
--- a/lib/librte_net/rte_tcp.h
+++ b/lib/librte_net/rte_tcp.h
@@ -2,6 +2,7 @@
* Copyright(c) 1982, 1986, 1990, 1993
* The Regents of the University of California.
* Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright(c) 2019 SmartShare Systems.
* All rights reserved.
*/
@@ -35,6 +36,18 @@ struct tcp_hdr {
uint16_t tcp_urp; /**< TCP urgent pointer, if any. */
} __attribute__((__packed__));
+/**
+ * TCP Flags
+ */
+#define TCP_CWR_FLAG 0x80 /**< Congestion Window Reduced */
+#define TCP_ECE_FLAG 0x40 /**< ECN-Echo */
+#define TCP_URG_FLAG 0x20 /**< Urgent Pointer field significant */
+#define TCP_ACK_FLAG 0x10 /**< Acknowledgment field significant */
+#define TCP_PSH_FLAG 0x08 /**< Push Function */
+#define TCP_RST_FLAG 0x04 /**< Reset the connection */
+#define TCP_SYN_FLAG 0x02 /**< Synchronize sequence numbers */
+#define TCP_FIN_FLAG 0x01 /**< No more data from sender */
+
#ifdef __cplusplus
}
#endif
--
1.5.6
next reply other threads:[~2019-05-10 7:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 7:01 Morten Brørup [this message]
2019-05-10 7:01 ` Morten Brørup
2019-05-10 9:40 ` Ferruh Yigit
2019-05-10 9:40 ` Ferruh Yigit
2019-05-10 13:46 ` Morten Brørup
2019-05-10 13:46 ` Morten Brørup
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98CBD80474FA8B44BF855DF32C47DC35B42838@smartserver.smartshare.dk \
--to=mb@smartsharesystems.com \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).